All of lore.kernel.org
 help / color / mirror / Atom feed
From: Nagarjuna Kristam <nkristam@nvidia.com>
To: balbi@kernel.org, gregkh@linuxfoundation.org,
	thierry.reding@gmail.com, jonathanh@nvidia.com,
	mark.rutland@arm.com, robh+dt@kernel.org, kishon@ti.com
Cc: devicetree@vger.kernel.org, linux-tegra@vger.kernel.org,
	linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
	Nagarjuna Kristam <nkristam@nvidia.com>
Subject: [Patch V2 09/18] usb: gadget: tegra-xudc: Remove usb-role-switch support
Date: Wed, 18 Dec 2019 14:46:22 +0530	[thread overview]
Message-ID: <1576660591-10383-10-git-send-email-nkristam@nvidia.com> (raw)
In-Reply-To: <1576660591-10383-1-git-send-email-nkristam@nvidia.com>

Padctl driver will act as a central driver to receive USB role changes via
usb-role-switch. This is updated to corresponding host, device drivers.
Hence remove usb-role-switch from XUDC driver.

Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
---
V2:
 - No changes in this version
---
 drivers/usb/gadget/udc/tegra-xudc.c | 65 ++++++++++---------------------------
 1 file changed, 17 insertions(+), 48 deletions(-)

diff --git a/drivers/usb/gadget/udc/tegra-xudc.c b/drivers/usb/gadget/udc/tegra-xudc.c
index 634c2c1..6ddb974 100644
--- a/drivers/usb/gadget/udc/tegra-xudc.c
+++ b/drivers/usb/gadget/udc/tegra-xudc.c
@@ -477,8 +477,8 @@ struct tegra_xudc {
 
 	struct clk_bulk_data *clks;
 
-	enum usb_role device_mode;
-	struct usb_role_switch *usb_role_sw;
+	enum usb_role role;
+	bool device_mode;
 	struct work_struct usb_role_sw_work;
 
 	struct phy *usb3_phy;
@@ -596,6 +596,8 @@ static void tegra_xudc_device_mode_on(struct tegra_xudc *xudc)
 {
 	int err;
 
+	if (xudc->device_mode)
+		return;
 	pm_runtime_get_sync(xudc->dev);
 
 	err = phy_power_on(xudc->utmi_phy);
@@ -610,7 +612,8 @@ static void tegra_xudc_device_mode_on(struct tegra_xudc *xudc)
 
 	tegra_xusb_padctl_set_vbus_override(xudc->padctl, true);
 
-	xudc->device_mode = USB_ROLE_DEVICE;
+	xudc->device_mode = true;
+
 }
 
 static void tegra_xudc_device_mode_off(struct tegra_xudc *xudc)
@@ -619,6 +622,9 @@ static void tegra_xudc_device_mode_off(struct tegra_xudc *xudc)
 	u32 pls, val;
 	int err;
 
+	if (!xudc->device_mode)
+		return;
+
 	dev_dbg(xudc->dev, "device mode off\n");
 
 	connected = !!(xudc_readl(xudc, PORTSC) & PORTSC_CCS);
@@ -643,7 +649,7 @@ static void tegra_xudc_device_mode_off(struct tegra_xudc *xudc)
 		xudc_writel(xudc, val, PORTSC);
 	}
 
-	xudc->device_mode = USB_ROLE_NONE;
+	xudc->device_mode = false;
 
 	/* Wait for disconnect event. */
 	if (connected)
@@ -668,31 +674,13 @@ static void tegra_xudc_usb_role_sw_work(struct work_struct *work)
 	struct tegra_xudc *xudc = container_of(work, struct tegra_xudc,
 					       usb_role_sw_work);
 
-	if (!xudc->usb_role_sw ||
-		usb_role_switch_get_role(xudc->usb_role_sw) == USB_ROLE_DEVICE)
+	if (xudc->role == USB_ROLE_DEVICE)
 		tegra_xudc_device_mode_on(xudc);
 	else
 		tegra_xudc_device_mode_off(xudc);
 
 }
 
-static int tegra_xudc_usb_role_sw_set(struct device *dev, enum usb_role role)
-{
-	struct tegra_xudc *xudc = dev_get_drvdata(dev);
-	unsigned long flags;
-
-	dev_dbg(dev, "%s role is %d\n", __func__, role);
-
-	spin_lock_irqsave(&xudc->lock, flags);
-
-	if (!xudc->suspended)
-		schedule_work(&xudc->usb_role_sw_work);
-
-	spin_unlock_irqrestore(&xudc->lock, flags);
-
-	return 0;
-}
-
 static void tegra_xudc_plc_reset_work(struct work_struct *work)
 {
 	struct delayed_work *dwork = to_delayed_work(work);
@@ -729,8 +717,7 @@ static void tegra_xudc_port_reset_war_work(struct work_struct *work)
 
 	spin_lock_irqsave(&xudc->lock, flags);
 
-	if ((xudc->device_mode == USB_ROLE_DEVICE)
-			      && xudc->wait_for_sec_prc) {
+	if (xudc->device_mode && xudc->wait_for_sec_prc) {
 		pls = (xudc_readl(xudc, PORTSC) & PORTSC_PLS_MASK) >>
 			PORTSC_PLS_SHIFT;
 		dev_dbg(xudc->dev, "pls = %x\n", pls);
@@ -3457,7 +3444,6 @@ static int tegra_xudc_probe(struct platform_device *pdev)
 {
 	struct tegra_xudc *xudc;
 	struct resource *res;
-	struct usb_role_switch_desc role_sx_desc = { 0 };
 	unsigned int i;
 	int err;
 
@@ -3587,23 +3573,10 @@ static int tegra_xudc_probe(struct platform_device *pdev)
 	INIT_DELAYED_WORK(&xudc->port_reset_war_work,
 				tegra_xudc_port_reset_war_work);
 
-	if (of_property_read_bool(xudc->dev->of_node, "usb-role-switch")) {
-		role_sx_desc.set = tegra_xudc_usb_role_sw_set;
-		role_sx_desc.fwnode = dev_fwnode(xudc->dev);
-
-		xudc->usb_role_sw = usb_role_switch_register(xudc->dev,
-							&role_sx_desc);
-		if (IS_ERR(xudc->usb_role_sw)) {
-			err = PTR_ERR(xudc->usb_role_sw);
-			dev_err(xudc->dev, "Failed to register USB role SW: %d",
-					   err);
-			goto free_eps;
-		}
-	} else {
-		/* Set the mode as device mode and this keeps phy always ON */
-		dev_info(xudc->dev, "Set usb role to device mode always");
-		schedule_work(&xudc->usb_role_sw_work);
-	}
+	/* Set the mode as device mode and this keeps phy always ON */
+	dev_info(xudc->dev, "Set usb role to device mode always");
+	xudc->role = USB_ROLE_DEVICE;
+	schedule_work(&xudc->usb_role_sw_work);
 
 	pm_runtime_enable(&pdev->dev);
 
@@ -3643,11 +3616,7 @@ static int tegra_xudc_remove(struct platform_device *pdev)
 	pm_runtime_get_sync(xudc->dev);
 
 	cancel_delayed_work(&xudc->plc_reset_work);
-
-	if (xudc->usb_role_sw) {
-		usb_role_switch_unregister(xudc->usb_role_sw);
-		cancel_work_sync(&xudc->usb_role_sw_work);
-	}
+	cancel_work_sync(&xudc->usb_role_sw_work);
 
 	usb_del_gadget_udc(&xudc->gadget);
 
-- 
2.7.4

WARNING: multiple messages have this Message-ID (diff)
From: Nagarjuna Kristam <nkristam@nvidia.com>
To: <balbi@kernel.org>, <gregkh@linuxfoundation.org>,
	<thierry.reding@gmail.com>, <jonathanh@nvidia.com>,
	<mark.rutland@arm.com>, <robh+dt@kernel.org>, <kishon@ti.com>
Cc: <devicetree@vger.kernel.org>, <linux-tegra@vger.kernel.org>,
	<linux-usb@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	"Nagarjuna Kristam" <nkristam@nvidia.com>
Subject: [Patch V2 09/18] usb: gadget: tegra-xudc: Remove usb-role-switch support
Date: Wed, 18 Dec 2019 14:46:22 +0530	[thread overview]
Message-ID: <1576660591-10383-10-git-send-email-nkristam@nvidia.com> (raw)
In-Reply-To: <1576660591-10383-1-git-send-email-nkristam@nvidia.com>

Padctl driver will act as a central driver to receive USB role changes via
usb-role-switch. This is updated to corresponding host, device drivers.
Hence remove usb-role-switch from XUDC driver.

Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
---
V2:
 - No changes in this version
---
 drivers/usb/gadget/udc/tegra-xudc.c | 65 ++++++++++---------------------------
 1 file changed, 17 insertions(+), 48 deletions(-)

diff --git a/drivers/usb/gadget/udc/tegra-xudc.c b/drivers/usb/gadget/udc/tegra-xudc.c
index 634c2c1..6ddb974 100644
--- a/drivers/usb/gadget/udc/tegra-xudc.c
+++ b/drivers/usb/gadget/udc/tegra-xudc.c
@@ -477,8 +477,8 @@ struct tegra_xudc {
 
 	struct clk_bulk_data *clks;
 
-	enum usb_role device_mode;
-	struct usb_role_switch *usb_role_sw;
+	enum usb_role role;
+	bool device_mode;
 	struct work_struct usb_role_sw_work;
 
 	struct phy *usb3_phy;
@@ -596,6 +596,8 @@ static void tegra_xudc_device_mode_on(struct tegra_xudc *xudc)
 {
 	int err;
 
+	if (xudc->device_mode)
+		return;
 	pm_runtime_get_sync(xudc->dev);
 
 	err = phy_power_on(xudc->utmi_phy);
@@ -610,7 +612,8 @@ static void tegra_xudc_device_mode_on(struct tegra_xudc *xudc)
 
 	tegra_xusb_padctl_set_vbus_override(xudc->padctl, true);
 
-	xudc->device_mode = USB_ROLE_DEVICE;
+	xudc->device_mode = true;
+
 }
 
 static void tegra_xudc_device_mode_off(struct tegra_xudc *xudc)
@@ -619,6 +622,9 @@ static void tegra_xudc_device_mode_off(struct tegra_xudc *xudc)
 	u32 pls, val;
 	int err;
 
+	if (!xudc->device_mode)
+		return;
+
 	dev_dbg(xudc->dev, "device mode off\n");
 
 	connected = !!(xudc_readl(xudc, PORTSC) & PORTSC_CCS);
@@ -643,7 +649,7 @@ static void tegra_xudc_device_mode_off(struct tegra_xudc *xudc)
 		xudc_writel(xudc, val, PORTSC);
 	}
 
-	xudc->device_mode = USB_ROLE_NONE;
+	xudc->device_mode = false;
 
 	/* Wait for disconnect event. */
 	if (connected)
@@ -668,31 +674,13 @@ static void tegra_xudc_usb_role_sw_work(struct work_struct *work)
 	struct tegra_xudc *xudc = container_of(work, struct tegra_xudc,
 					       usb_role_sw_work);
 
-	if (!xudc->usb_role_sw ||
-		usb_role_switch_get_role(xudc->usb_role_sw) == USB_ROLE_DEVICE)
+	if (xudc->role == USB_ROLE_DEVICE)
 		tegra_xudc_device_mode_on(xudc);
 	else
 		tegra_xudc_device_mode_off(xudc);
 
 }
 
-static int tegra_xudc_usb_role_sw_set(struct device *dev, enum usb_role role)
-{
-	struct tegra_xudc *xudc = dev_get_drvdata(dev);
-	unsigned long flags;
-
-	dev_dbg(dev, "%s role is %d\n", __func__, role);
-
-	spin_lock_irqsave(&xudc->lock, flags);
-
-	if (!xudc->suspended)
-		schedule_work(&xudc->usb_role_sw_work);
-
-	spin_unlock_irqrestore(&xudc->lock, flags);
-
-	return 0;
-}
-
 static void tegra_xudc_plc_reset_work(struct work_struct *work)
 {
 	struct delayed_work *dwork = to_delayed_work(work);
@@ -729,8 +717,7 @@ static void tegra_xudc_port_reset_war_work(struct work_struct *work)
 
 	spin_lock_irqsave(&xudc->lock, flags);
 
-	if ((xudc->device_mode == USB_ROLE_DEVICE)
-			      && xudc->wait_for_sec_prc) {
+	if (xudc->device_mode && xudc->wait_for_sec_prc) {
 		pls = (xudc_readl(xudc, PORTSC) & PORTSC_PLS_MASK) >>
 			PORTSC_PLS_SHIFT;
 		dev_dbg(xudc->dev, "pls = %x\n", pls);
@@ -3457,7 +3444,6 @@ static int tegra_xudc_probe(struct platform_device *pdev)
 {
 	struct tegra_xudc *xudc;
 	struct resource *res;
-	struct usb_role_switch_desc role_sx_desc = { 0 };
 	unsigned int i;
 	int err;
 
@@ -3587,23 +3573,10 @@ static int tegra_xudc_probe(struct platform_device *pdev)
 	INIT_DELAYED_WORK(&xudc->port_reset_war_work,
 				tegra_xudc_port_reset_war_work);
 
-	if (of_property_read_bool(xudc->dev->of_node, "usb-role-switch")) {
-		role_sx_desc.set = tegra_xudc_usb_role_sw_set;
-		role_sx_desc.fwnode = dev_fwnode(xudc->dev);
-
-		xudc->usb_role_sw = usb_role_switch_register(xudc->dev,
-							&role_sx_desc);
-		if (IS_ERR(xudc->usb_role_sw)) {
-			err = PTR_ERR(xudc->usb_role_sw);
-			dev_err(xudc->dev, "Failed to register USB role SW: %d",
-					   err);
-			goto free_eps;
-		}
-	} else {
-		/* Set the mode as device mode and this keeps phy always ON */
-		dev_info(xudc->dev, "Set usb role to device mode always");
-		schedule_work(&xudc->usb_role_sw_work);
-	}
+	/* Set the mode as device mode and this keeps phy always ON */
+	dev_info(xudc->dev, "Set usb role to device mode always");
+	xudc->role = USB_ROLE_DEVICE;
+	schedule_work(&xudc->usb_role_sw_work);
 
 	pm_runtime_enable(&pdev->dev);
 
@@ -3643,11 +3616,7 @@ static int tegra_xudc_remove(struct platform_device *pdev)
 	pm_runtime_get_sync(xudc->dev);
 
 	cancel_delayed_work(&xudc->plc_reset_work);
-
-	if (xudc->usb_role_sw) {
-		usb_role_switch_unregister(xudc->usb_role_sw);
-		cancel_work_sync(&xudc->usb_role_sw_work);
-	}
+	cancel_work_sync(&xudc->usb_role_sw_work);
 
 	usb_del_gadget_udc(&xudc->gadget);
 
-- 
2.7.4


  parent reply	other threads:[~2019-12-18  9:16 UTC|newest]

Thread overview: 67+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-18  9:16 [Patch V2 00/18] Tegra XUSB OTG support Nagarjuna Kristam
2019-12-18  9:16 ` Nagarjuna Kristam
2019-12-18  9:16 ` [Patch V2 01/18] dt-bindings: phy: tegra-xusb: Add usb-role-switch Nagarjuna Kristam
2019-12-18  9:16   ` Nagarjuna Kristam
2019-12-19 13:05   ` Thierry Reding
2019-12-20  8:08     ` JC Kuo
2019-12-20  8:08       ` JC Kuo
     [not found]       ` <fe47fd52-efd0-4f84-d1e4-4bce5571e425-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2020-01-10 11:16         ` Thierry Reding
2020-01-10 11:16           ` Thierry Reding
2020-01-13  4:37           ` Nagarjuna Kristam
2020-01-13  4:37             ` Nagarjuna Kristam
     [not found]             ` <6eb31a50-472f-439c-3bc7-bcad1c0c9ff4-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2020-01-13 15:06               ` Thierry Reding
2020-01-13 15:06                 ` Thierry Reding
2019-12-18  9:16 ` [Patch V2 02/18] dt-bindings: usb: Add NVIDIA Tegra XUSB device mode controller binding Nagarjuna Kristam
2019-12-18  9:16   ` Nagarjuna Kristam
2019-12-18 23:24   ` Rob Herring
2019-12-19 13:10   ` Thierry Reding
2019-12-18  9:16 ` [Patch V2 03/18] phy: tegra: xusb: Add usb-role-switch support Nagarjuna Kristam
2019-12-18  9:16   ` Nagarjuna Kristam
2019-12-19 13:26   ` Thierry Reding
2019-12-27  6:39     ` Nagarjuna Kristam
2019-12-27  6:39       ` Nagarjuna Kristam
2019-12-29  9:36       ` Thierry Reding
2019-12-30  5:17         ` Nagarjuna Kristam
2019-12-30  5:17           ` Nagarjuna Kristam
2019-12-26  6:42   ` JC Kuo
2019-12-26  6:42     ` JC Kuo
2019-12-27  6:18     ` Nagarjuna Kristam
2019-12-27  6:18       ` Nagarjuna Kristam
2019-12-18  9:16 ` [Patch V2 04/18] phy: tegra: xusb: Add usb-phy support Nagarjuna Kristam
2019-12-18  9:16   ` Nagarjuna Kristam
2019-12-19 13:37   ` Thierry Reding
2019-12-27  7:06     ` Nagarjuna Kristam
2019-12-27  7:06       ` Nagarjuna Kristam
2019-12-18  9:16 ` [Patch V2 05/18] phy: tegra: xusb: Add support to get companion USB 3 port Nagarjuna Kristam
2019-12-18  9:16   ` Nagarjuna Kristam
2019-12-26  7:03   ` JC Kuo
2019-12-26  7:03     ` JC Kuo
2019-12-18  9:16 ` [Patch V2 06/18] phy: tegra: xusb: Add set_mode support for USB 2 phy on Tegra210 Nagarjuna Kristam
2019-12-18  9:16   ` Nagarjuna Kristam
2019-12-18  9:16 ` [Patch V2 07/18] phy: tegra: xusb: Add set_mode support for utmi phy on Tegra186 Nagarjuna Kristam
2019-12-18  9:16   ` Nagarjuna Kristam
2019-12-18  9:16 ` [Patch V2 08/18] usb: xhci-tegra: Add OTG support Nagarjuna Kristam
2019-12-18  9:16   ` Nagarjuna Kristam
2019-12-18  9:16 ` Nagarjuna Kristam [this message]
2019-12-18  9:16   ` [Patch V2 09/18] usb: gadget: tegra-xudc: Remove usb-role-switch support Nagarjuna Kristam
2019-12-18  9:16 ` [Patch V2 10/18] usb: gadget: tegra-xudc: Add usb-phy support Nagarjuna Kristam
2019-12-18  9:16   ` Nagarjuna Kristam
2019-12-18  9:16 ` [Patch V2 11/18] usb: gadget: tegra-xudc: use phy_set_mode to set/unset device mode Nagarjuna Kristam
2019-12-18  9:16   ` Nagarjuna Kristam
2019-12-18  9:16 ` [Patch V2 12/18] usb: gadget: tegra-xudc: support multiple device modes Nagarjuna Kristam
2019-12-18  9:16   ` Nagarjuna Kristam
2019-12-18  9:16 ` [Patch V2 13/18] arm64: tegra: update OTG port entries for jetson-tx1 Nagarjuna Kristam
2019-12-18  9:16   ` Nagarjuna Kristam
2019-12-18  9:16 ` [Patch V2 14/18] arm64: tegra: update OTG port entries for jetson-tx2 Nagarjuna Kristam
2019-12-18  9:16   ` Nagarjuna Kristam
2019-12-18  9:16 ` [Patch V2 15/18] arm64: tegra: Add xudc node for Tegra210 Nagarjuna Kristam
2019-12-18  9:16   ` Nagarjuna Kristam
2019-12-18  9:16 ` [Patch V2 16/18] arm64: tegra: Enable xudc on Jetson TX1 Nagarjuna Kristam
2019-12-18  9:16   ` Nagarjuna Kristam
2019-12-18  9:16 ` [Patch V2 17/18] arm64: tegra: Add xudc node for Tegra186 Nagarjuna Kristam
2019-12-18  9:16   ` Nagarjuna Kristam
2019-12-18  9:16 ` [Patch V2 18/18] arm64: tegra: Enable xudc node on Jetson TX2 Nagarjuna Kristam
2019-12-18  9:16   ` Nagarjuna Kristam
2019-12-19 13:13 ` [Patch V2 00/18] Tegra XUSB OTG support Thierry Reding
2019-12-20  7:35   ` JC Kuo
2019-12-20  7:35     ` JC Kuo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1576660591-10383-10-git-send-email-nkristam@nvidia.com \
    --to=nkristam@nvidia.com \
    --cc=balbi@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jonathanh@nvidia.com \
    --cc=kishon@ti.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.