Re: [RESEND PATCH v5 01/11] dt-bindings: phy-mtk-tphy: add two optional properties for u2phy

[Chunfeng Yun <chunfeng.yun@mediatek.com>]

Hi Kishon,

On Fri, 2020-01-10 at 16:40 +0530, Kishon Vijay Abraham I wrote:
> Hi,
> 
> On Wed, Jan 08, 2020 at 09:51:56AM +0800, Chunfeng Yun wrote:
> > Add two optional properties, one for tuning J-K voltage by INTR,
> > another for disconnect threshold, both of them are related with
> > connect detection
> > 
> > Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> > Acked-by: Rob Herring <robh@kernel.org>
> 
> Patch does not apply. I get the following errors
> error: patch failed: Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt:52
> error: Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt: patch does not apply
> error: Did you hand edit your patch?
> 
> Can you send them again in the right format?
I download this patch from https://patchwork.kernel.org/patch/11322505/
and fetch kernel5.5-rc5, then

git am --reject
RESEND-v5-01-11-dt-bindings-phy-mtk-tphy-add-two-optional-properties-for-u2phy.patch
Applying: dt-bindings: phy-mtk-tphy: add two optional properties for
u2phy
Checking patch Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt...
Applied patch Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
cleanly.

don't reproduce the error you encountered, can you tell me the steps you
apply the patch, thanks


> 
> Thanks
> Kishon
> > ---
> > v5: add acked-by Rob
> > 
> > v4: no changes
> > 
> > v3: change commit log
> > 
> > v2: change description
> > ---
> >  Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt | 2 ++
> >  1 file changed, 2 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
> > index a5f7a4f0dbc1..ce6abfbdfbe1 100644
> > --- a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
> > +++ b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
> > @@ -52,6 +52,8 @@ Optional properties (PHY_TYPE_USB2 port (child) node):
> >  - mediatek,eye-vrt	: u32, the selection of VRT reference voltage
> >  - mediatek,eye-term	: u32, the selection of HS_TX TERM reference voltage
> >  - mediatek,bc12	: bool, enable BC12 of u2phy if support it
> > +- mediatek,discth	: u32, the selection of disconnect threshold
> > +- mediatek,intr	: u32, the selection of internal R (resistance)
> >  
> >  Example:
> >  
> > -- 
> > 2.24.0