All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ben Levinsky <ben.levinsky@xilinx.com>
To: ohad@wizery.com, bjorn.andersson@linaro.org,
	michal.simek@xilinx.com, jollys@xilinx.com,
	rajan.vaja@xilinx.com, robh+dt@kernel.org, mark.rutland@arm.com
Cc: linux-remoteproc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 1/5] firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU configuration.
Date: Mon, 24 Feb 2020 09:52:27 -0800	[thread overview]
Message-ID: <1582566751-13118-2-git-send-email-ben.levinsky@xilinx.com> (raw)
In-Reply-To: <1582566751-13118-1-git-send-email-ben.levinsky@xilinx.com>

Add ZynqMP firmware ioctl enums for RPU configuration.

Signed-off-by: Ben Levinsky <ben.levinsky@xilinx.com>
---
 drivers/firmware/xilinx/zynqmp.c     |  4 ++++
 include/linux/firmware/xlnx-zynqmp.h | 19 +++++++++++++++++++
 2 files changed, 23 insertions(+)

diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index ecc339d..20e4574 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -512,6 +512,10 @@ static int zynqmp_pm_clock_getparent(u32 clock_id, u32 *parent_id)
 static inline int zynqmp_is_valid_ioctl(u32 ioctl_id)
 {
 	switch (ioctl_id) {
+	case IOCTL_GET_RPU_OPER_MODE:
+	case IOCTL_SET_RPU_OPER_MODE:
+	case IOCTL_RPU_BOOT_ADDR_CONFIG:
+	case IOCTL_TCM_COMB_CONFIG:
 	case IOCTL_SET_PLL_FRAC_MODE:
 	case IOCTL_GET_PLL_FRAC_MODE:
 	case IOCTL_SET_PLL_FRAC_DATA:
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index 2cd12eb..b8ca118 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -100,6 +100,10 @@ enum pm_ret_status {
 };
 
 enum pm_ioctl_id {
+	IOCTL_GET_RPU_OPER_MODE = 0,
+	IOCTL_SET_RPU_OPER_MODE,
+	IOCTL_RPU_BOOT_ADDR_CONFIG,
+	IOCTL_TCM_COMB_CONFIG,
 	IOCTL_SET_SD_TAPDELAY = 7,
 	IOCTL_SET_PLL_FRAC_MODE,
 	IOCTL_GET_PLL_FRAC_MODE,
@@ -118,6 +122,21 @@ enum pm_query_id {
 	PM_QID_CLOCK_GET_MAX_DIVISOR,
 };
 
+enum rpu_oper_mode {
+	PM_RPU_MODE_LOCKSTEP,
+	PM_RPU_MODE_SPLIT,
+};
+
+enum rpu_boot_mem {
+	PM_RPU_BOOTMEM_LOVEC,
+	PM_RPU_BOOTMEM_HIVEC,
+};
+
+enum rpu_tcm_comb {
+	PM_RPU_TCM_SPLIT,
+	PM_RPU_TCM_COMB,
+};
+
 enum zynqmp_pm_reset_action {
 	PM_RESET_ACTION_RELEASE,
 	PM_RESET_ACTION_ASSERT,
-- 
2.7.4

WARNING: multiple messages have this Message-ID (diff)
From: Ben Levinsky <ben.levinsky@xilinx.com>
To: ohad@wizery.com, bjorn.andersson@linaro.org,
	michal.simek@xilinx.com, jollys@xilinx.com,
	rajan.vaja@xilinx.com, robh+dt@kernel.org, mark.rutland@arm.com
Cc: devicetree@vger.kernel.org, linux-remoteproc@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/5] firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU configuration.
Date: Mon, 24 Feb 2020 09:52:27 -0800	[thread overview]
Message-ID: <1582566751-13118-2-git-send-email-ben.levinsky@xilinx.com> (raw)
In-Reply-To: <1582566751-13118-1-git-send-email-ben.levinsky@xilinx.com>

Add ZynqMP firmware ioctl enums for RPU configuration.

Signed-off-by: Ben Levinsky <ben.levinsky@xilinx.com>
---
 drivers/firmware/xilinx/zynqmp.c     |  4 ++++
 include/linux/firmware/xlnx-zynqmp.h | 19 +++++++++++++++++++
 2 files changed, 23 insertions(+)

diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index ecc339d..20e4574 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -512,6 +512,10 @@ static int zynqmp_pm_clock_getparent(u32 clock_id, u32 *parent_id)
 static inline int zynqmp_is_valid_ioctl(u32 ioctl_id)
 {
 	switch (ioctl_id) {
+	case IOCTL_GET_RPU_OPER_MODE:
+	case IOCTL_SET_RPU_OPER_MODE:
+	case IOCTL_RPU_BOOT_ADDR_CONFIG:
+	case IOCTL_TCM_COMB_CONFIG:
 	case IOCTL_SET_PLL_FRAC_MODE:
 	case IOCTL_GET_PLL_FRAC_MODE:
 	case IOCTL_SET_PLL_FRAC_DATA:
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index 2cd12eb..b8ca118 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -100,6 +100,10 @@ enum pm_ret_status {
 };
 
 enum pm_ioctl_id {
+	IOCTL_GET_RPU_OPER_MODE = 0,
+	IOCTL_SET_RPU_OPER_MODE,
+	IOCTL_RPU_BOOT_ADDR_CONFIG,
+	IOCTL_TCM_COMB_CONFIG,
 	IOCTL_SET_SD_TAPDELAY = 7,
 	IOCTL_SET_PLL_FRAC_MODE,
 	IOCTL_GET_PLL_FRAC_MODE,
@@ -118,6 +122,21 @@ enum pm_query_id {
 	PM_QID_CLOCK_GET_MAX_DIVISOR,
 };
 
+enum rpu_oper_mode {
+	PM_RPU_MODE_LOCKSTEP,
+	PM_RPU_MODE_SPLIT,
+};
+
+enum rpu_boot_mem {
+	PM_RPU_BOOTMEM_LOVEC,
+	PM_RPU_BOOTMEM_HIVEC,
+};
+
+enum rpu_tcm_comb {
+	PM_RPU_TCM_SPLIT,
+	PM_RPU_TCM_COMB,
+};
+
 enum zynqmp_pm_reset_action {
 	PM_RESET_ACTION_RELEASE,
 	PM_RESET_ACTION_ASSERT,
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2020-02-24 17:52 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-24 17:52 [PATCH 0/5] remoteproc: Add zynqmp_r5 driver Ben Levinsky
2020-02-24 17:52 ` Ben Levinsky
2020-02-24 17:52 ` Ben Levinsky [this message]
2020-02-24 17:52   ` [PATCH 1/5] firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU configuration Ben Levinsky
2020-03-12  7:32   ` Michal Simek
2020-03-12  7:32     ` Michal Simek
2020-02-24 17:52 ` [PATCH 2/5] firmware: xilinx: Add shutdown/wakeup APIs Ben Levinsky
2020-02-24 17:52   ` Ben Levinsky
2020-03-12  7:34   ` Michal Simek
2020-03-12  7:34     ` Michal Simek
2020-02-24 17:52 ` [PATCH 3/5] firmware: xilinx: Add zynqmp_get_node_status API Ben Levinsky
2020-02-24 17:52   ` Ben Levinsky
2020-03-11 16:26   ` Mathieu Poirier
2020-03-11 16:26     ` Mathieu Poirier
2020-02-24 17:52 ` [PATCH 4/5] dt-bindings: remoteproc: Add documentation for ZynqMP R5 rproc bindings Ben Levinsky
2020-02-24 17:52   ` Ben Levinsky
2020-03-02 20:27   ` Rob Herring
2020-03-02 20:27     ` Rob Herring
2020-03-11 16:55   ` Mathieu Poirier
2020-03-11 16:55     ` Mathieu Poirier
2020-02-24 17:52 ` [PATCH 5/5] remoteproc: Add initial zynqmp R5 remoteproc driver Ben Levinsky
2020-02-24 17:52   ` Ben Levinsky
2020-03-05 23:12   ` Michael Auchter
2020-03-05 23:12     ` Michael Auchter
2020-03-11 17:38   ` Mathieu Poirier
2020-03-11 17:38     ` Mathieu Poirier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1582566751-13118-2-git-send-email-ben.levinsky@xilinx.com \
    --to=ben.levinsky@xilinx.com \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jollys@xilinx.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=michal.simek@xilinx.com \
    --cc=ohad@wizery.com \
    --cc=rajan.vaja@xilinx.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.