[PATCH 0/4] Clock driver fixes

[PATCH 0/4] Clock driver fixes

[Jolly Shah]

This patchset includes below fixes for clock driver
1> Fix Divider2 calculation 
2> Memory leak in clock registration
3> Fix invalid name queries
4> Limit bestdiv with maxdiv

Quanyang Wang (1):
  clk: zynqmp: fix memory leak in zynqmp_register_clocks

Rajan Vaja (2):
  clk: zynqmp: Limit bestdiv with maxdiv
  drivers: clk: Fix invalid clock name queries

Tejas Patel (1):
  drivers: clk: zynqmp: Fix divider2 calculation

 drivers/clk/zynqmp/clkc.c    | 20 ++++++++++++++------
 drivers/clk/zynqmp/divider.c | 19 ++++++++++++++-----
 2 files changed, 28 insertions(+), 11 deletions(-)

-- 
2.7.4

[PATCH 0/4] Clock driver fixes

[Jolly Shah]

This patchset includes below fixes for clock driver
1> Fix Divider2 calculation 
2> Memory leak in clock registration
3> Fix invalid name queries
4> Limit bestdiv with maxdiv

Quanyang Wang (1):
  clk: zynqmp: fix memory leak in zynqmp_register_clocks

Rajan Vaja (2):
  clk: zynqmp: Limit bestdiv with maxdiv
  drivers: clk: Fix invalid clock name queries

Tejas Patel (1):
  drivers: clk: zynqmp: Fix divider2 calculation

 drivers/clk/zynqmp/clkc.c    | 20 ++++++++++++++------
 drivers/clk/zynqmp/divider.c | 19 ++++++++++++++-----
 2 files changed, 28 insertions(+), 11 deletions(-)

-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 1/4] clk: zynqmp: Limit bestdiv with maxdiv

[Jolly Shah]

From: Rajan Vaja <rajan.vaja@xilinx.com>

Clock divider value should not be greater than maximum divider value.
So use minimum of best divider or maximum divider value.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
---
 drivers/clk/zynqmp/divider.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/clk/zynqmp/divider.c b/drivers/clk/zynqmp/divider.c
index 973cdf0..7d2cb61 100644
--- a/drivers/clk/zynqmp/divider.c
+++ b/drivers/clk/zynqmp/divider.c
@@ -198,6 +198,8 @@ static long zynqmp_clk_divider_round_rate(struct clk_hw *hw,
 
 	if ((clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT) && divider->is_frac)
 		bestdiv = rate % *prate ? 1 : bestdiv;
+
+	bestdiv = min_t(u32, bestdiv, divider->max_div);
 	*prate = rate * bestdiv;
 
 	return rate;
-- 
2.7.4

[PATCH 1/4] clk: zynqmp: Limit bestdiv with maxdiv

[Jolly Shah]

From: Rajan Vaja <rajan.vaja@xilinx.com>

Clock divider value should not be greater than maximum divider value.
So use minimum of best divider or maximum divider value.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
---
 drivers/clk/zynqmp/divider.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/clk/zynqmp/divider.c b/drivers/clk/zynqmp/divider.c
index 973cdf0..7d2cb61 100644
--- a/drivers/clk/zynqmp/divider.c
+++ b/drivers/clk/zynqmp/divider.c
@@ -198,6 +198,8 @@ static long zynqmp_clk_divider_round_rate(struct clk_hw *hw,
 
 	if ((clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT) && divider->is_frac)
 		bestdiv = rate % *prate ? 1 : bestdiv;
+
+	bestdiv = min_t(u32, bestdiv, divider->max_div);
 	*prate = rate * bestdiv;
 
 	return rate;
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 2/4] drivers: clk: zynqmp: Fix divider2 calculation

[Jolly Shah]

From: Tejas Patel <tejas.patel@xilinx.com>

zynqmp_get_divider2_val() calculates, divider value of type DIV2 clock,
considering best possible combination of DIV1 and DIV2.

To find best possible values of DIV1 and DIV2, DIV1's parent rate
should be consider and not DIV2's parent rate since it would rate of
div1 clock. Consider a below topology,

	out_clk->div2_clk->div1_clk->fixed_parent

where out_clk = (fixed_parent/div1_clk) / div2_clk, so parent clock
of div1_clk (i.e. out_clk) should be divided by div1_clk and div2_clk.

Existing code divides parent rate of div2_clk's clock instead of
div1_clk's parent rate, which is wrong.

Fix the same by considering div1's parent clock rate.

Fixes: 4ebd92d2e228 ("clk: zynqmp: Fix divider calculation")
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
---
 drivers/clk/zynqmp/divider.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

diff --git a/drivers/clk/zynqmp/divider.c b/drivers/clk/zynqmp/divider.c
index 7d2cb61..dea3e21 100644
--- a/drivers/clk/zynqmp/divider.c
+++ b/drivers/clk/zynqmp/divider.c
@@ -112,23 +112,30 @@ static unsigned long zynqmp_clk_divider_recalc_rate(struct clk_hw *hw,
 
 static void zynqmp_get_divider2_val(struct clk_hw *hw,
 				    unsigned long rate,
-				    unsigned long parent_rate,
 				    struct zynqmp_clk_divider *divider,
 				    int *bestdiv)
 {
 	int div1;
 	int div2;
 	long error = LONG_MAX;
-	struct clk_hw *parent_hw = clk_hw_get_parent(hw);
-	struct zynqmp_clk_divider *pdivider = to_zynqmp_clk_divider(parent_hw);
+	unsigned long div1_prate;
+	struct clk_hw *div1_parent_hw;
+	struct clk_hw *div2_parent_hw = clk_hw_get_parent(hw);
+	struct zynqmp_clk_divider *pdivider =
+				to_zynqmp_clk_divider(div2_parent_hw);
 
 	if (!pdivider)
 		return;
 
+	div1_parent_hw = clk_hw_get_parent(div2_parent_hw);
+	if (!div1_parent_hw)
+		return;
+
+	div1_prate = clk_hw_get_rate(div1_parent_hw);
 	*bestdiv = 1;
 	for (div1 = 1; div1 <= pdivider->max_div;) {
 		for (div2 = 1; div2 <= divider->max_div;) {
-			long new_error = ((parent_rate / div1) / div2) - rate;
+			long new_error = ((div1_prate / div1) / div2) - rate;
 
 			if (abs(new_error) < abs(error)) {
 				*bestdiv = div2;
@@ -193,7 +200,7 @@ static long zynqmp_clk_divider_round_rate(struct clk_hw *hw,
 	 */
 	if (div_type == TYPE_DIV2 &&
 	    (clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT)) {
-		zynqmp_get_divider2_val(hw, rate, *prate, divider, &bestdiv);
+		zynqmp_get_divider2_val(hw, rate, divider, &bestdiv);
 	}
 
 	if ((clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT) && divider->is_frac)
-- 
2.7.4

[PATCH 2/4] drivers: clk: zynqmp: Fix divider2 calculation

[Jolly Shah]

From: Tejas Patel <tejas.patel@xilinx.com>

zynqmp_get_divider2_val() calculates, divider value of type DIV2 clock,
considering best possible combination of DIV1 and DIV2.

To find best possible values of DIV1 and DIV2, DIV1's parent rate
should be consider and not DIV2's parent rate since it would rate of
div1 clock. Consider a below topology,

	out_clk->div2_clk->div1_clk->fixed_parent

where out_clk = (fixed_parent/div1_clk) / div2_clk, so parent clock
of div1_clk (i.e. out_clk) should be divided by div1_clk and div2_clk.

Existing code divides parent rate of div2_clk's clock instead of
div1_clk's parent rate, which is wrong.

Fix the same by considering div1's parent clock rate.

Fixes: 4ebd92d2e228 ("clk: zynqmp: Fix divider calculation")
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
---
 drivers/clk/zynqmp/divider.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

diff --git a/drivers/clk/zynqmp/divider.c b/drivers/clk/zynqmp/divider.c
index 7d2cb61..dea3e21 100644
--- a/drivers/clk/zynqmp/divider.c
+++ b/drivers/clk/zynqmp/divider.c
@@ -112,23 +112,30 @@ static unsigned long zynqmp_clk_divider_recalc_rate(struct clk_hw *hw,
 
 static void zynqmp_get_divider2_val(struct clk_hw *hw,
 				    unsigned long rate,
-				    unsigned long parent_rate,
 				    struct zynqmp_clk_divider *divider,
 				    int *bestdiv)
 {
 	int div1;
 	int div2;
 	long error = LONG_MAX;
-	struct clk_hw *parent_hw = clk_hw_get_parent(hw);
-	struct zynqmp_clk_divider *pdivider = to_zynqmp_clk_divider(parent_hw);
+	unsigned long div1_prate;
+	struct clk_hw *div1_parent_hw;
+	struct clk_hw *div2_parent_hw = clk_hw_get_parent(hw);
+	struct zynqmp_clk_divider *pdivider =
+				to_zynqmp_clk_divider(div2_parent_hw);
 
 	if (!pdivider)
 		return;
 
+	div1_parent_hw = clk_hw_get_parent(div2_parent_hw);
+	if (!div1_parent_hw)
+		return;
+
+	div1_prate = clk_hw_get_rate(div1_parent_hw);
 	*bestdiv = 1;
 	for (div1 = 1; div1 <= pdivider->max_div;) {
 		for (div2 = 1; div2 <= divider->max_div;) {
-			long new_error = ((parent_rate / div1) / div2) - rate;
+			long new_error = ((div1_prate / div1) / div2) - rate;
 
 			if (abs(new_error) < abs(error)) {
 				*bestdiv = div2;
@@ -193,7 +200,7 @@ static long zynqmp_clk_divider_round_rate(struct clk_hw *hw,
 	 */
 	if (div_type == TYPE_DIV2 &&
 	    (clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT)) {
-		zynqmp_get_divider2_val(hw, rate, *prate, divider, &bestdiv);
+		zynqmp_get_divider2_val(hw, rate, divider, &bestdiv);
 	}
 
 	if ((clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT) && divider->is_frac)
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 3/4] drivers: clk: Fix invalid clock name queries

[Jolly Shah]

From: Rajan Vaja <rajan.vaja@xilinx.com>

The clock driver makes EEMI call to get the name of invalid clk
when executing versal_get_clock_info() function. This results in
error messages.
Added check for validating clock before saving clock attribute and
calling zynqmp_pm_clock_get_name() in versal_get_clock_info() function.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
---
 drivers/clk/zynqmp/clkc.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/clk/zynqmp/clkc.c b/drivers/clk/zynqmp/clkc.c
index 4dd8413..ff2d229 100644
--- a/drivers/clk/zynqmp/clkc.c
+++ b/drivers/clk/zynqmp/clkc.c
@@ -667,6 +667,11 @@ static void zynqmp_get_clock_info(void)
 			continue;
 
 		clock[i].valid = FIELD_GET(CLK_ATTR_VALID, attr.attr[0]);
+		/* skip query for Invalid clock */
+		ret = zynqmp_is_valid_clock(i);
+		if (ret != CLK_ATTR_VALID)
+			continue;
+
 		clock[i].type = FIELD_GET(CLK_ATTR_TYPE, attr.attr[0]) ?
 			CLK_TYPE_EXTERNAL : CLK_TYPE_OUTPUT;
 
-- 
2.7.4

[PATCH 3/4] drivers: clk: Fix invalid clock name queries

[Jolly Shah]

From: Rajan Vaja <rajan.vaja@xilinx.com>

The clock driver makes EEMI call to get the name of invalid clk
when executing versal_get_clock_info() function. This results in
error messages.
Added check for validating clock before saving clock attribute and
calling zynqmp_pm_clock_get_name() in versal_get_clock_info() function.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
---
 drivers/clk/zynqmp/clkc.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/clk/zynqmp/clkc.c b/drivers/clk/zynqmp/clkc.c
index 4dd8413..ff2d229 100644
--- a/drivers/clk/zynqmp/clkc.c
+++ b/drivers/clk/zynqmp/clkc.c
@@ -667,6 +667,11 @@ static void zynqmp_get_clock_info(void)
 			continue;
 
 		clock[i].valid = FIELD_GET(CLK_ATTR_VALID, attr.attr[0]);
+		/* skip query for Invalid clock */
+		ret = zynqmp_is_valid_clock(i);
+		if (ret != CLK_ATTR_VALID)
+			continue;
+
 		clock[i].type = FIELD_GET(CLK_ATTR_TYPE, attr.attr[0]) ?
 			CLK_TYPE_EXTERNAL : CLK_TYPE_OUTPUT;
 
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 4/4] clk: zynqmp: fix memory leak in zynqmp_register_clocks

[Jolly Shah]

From: Quanyang Wang <quanyang.wang@windriver.com>

This is detected by kmemleak running on zcu102 board:

unreferenced object 0xffffffc877e48180 (size 128):
comm "swapper/0", pid 1, jiffies 4294892909 (age 315.436s)
hex dump (first 32 bytes):
64 70 5f 76 69 64 65 6f 5f 72 65 66 5f 64 69 76 dp_video_ref_div
31 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1...............
backtrace:
[<00000000c9be883b>] __kmalloc_track_caller+0x200/0x380
[<00000000f02c3809>] kvasprintf+0x7c/0x100
[<00000000e51dde4d>] kasprintf+0x60/0x80
[<0000000092298b05>] zynqmp_register_clocks+0x29c/0x398
[<00000000faaff182>] zynqmp_clock_probe+0x3cc/0x4c0
[<000000005f5986f0>] platform_drv_probe+0x58/0xa8
[<00000000d5810136>] really_probe+0xd8/0x2a8
[<00000000f5b671be>] driver_probe_device+0x5c/0x100
[<0000000038f91fcf>] __device_attach_driver+0x98/0xb8
[<000000008a3f2ac2>] bus_for_each_drv+0x74/0xd8
[<000000001cb2783d>] __device_attach+0xe0/0x140
[<00000000c268031b>] device_initial_probe+0x24/0x30
[<000000006998de4b>] bus_probe_device+0x9c/0xa8
[<00000000647ae6ff>] device_add+0x3c0/0x610
[<0000000071c14bb8>] of_device_add+0x40/0x50
[<000000004bb5d132>] of_platform_device_create_pdata+0xbc/0x138

This is because that when num_nodes is larger than 1, clk_out is
allocated using kasprintf for these nodes but only the last node's
clk_out is freed.

Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
---
 drivers/clk/zynqmp/clkc.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/clk/zynqmp/clkc.c b/drivers/clk/zynqmp/clkc.c
index ff2d229..bfc1e7d 100644
--- a/drivers/clk/zynqmp/clkc.c
+++ b/drivers/clk/zynqmp/clkc.c
@@ -562,7 +562,7 @@ static struct clk_hw *zynqmp_register_clk_topology(int clk_id, char *clk_name,
 {
 	int j;
 	u32 num_nodes, clk_dev_id;
-	char *clk_out = NULL;
+	char *clk_out[MAX_NODES];
 	struct clock_topology *nodes;
 	struct clk_hw *hw = NULL;
 
@@ -576,16 +576,16 @@ static struct clk_hw *zynqmp_register_clk_topology(int clk_id, char *clk_name,
 		 * Intermediate clock names are postfixed with type of clock.
 		 */
 		if (j != (num_nodes - 1)) {
-			clk_out = kasprintf(GFP_KERNEL, "%s%s", clk_name,
+			clk_out[j] = kasprintf(GFP_KERNEL, "%s%s", clk_name,
 					    clk_type_postfix[nodes[j].type]);
 		} else {
-			clk_out = kasprintf(GFP_KERNEL, "%s", clk_name);
+			clk_out[j] = kasprintf(GFP_KERNEL, "%s", clk_name);
 		}
 
 		if (!clk_topology[nodes[j].type])
 			continue;
 
-		hw = (*clk_topology[nodes[j].type])(clk_out, clk_dev_id,
+		hw = (*clk_topology[nodes[j].type])(clk_out[j], clk_dev_id,
 						    parent_names,
 						    num_parents,
 						    &nodes[j]);
@@ -594,9 +594,12 @@ static struct clk_hw *zynqmp_register_clk_topology(int clk_id, char *clk_name,
 				     __func__,  clk_dev_id, clk_name,
 				     PTR_ERR(hw));
 
-		parent_names[0] = clk_out;
+		parent_names[0] = clk_out[j];
 	}
-	kfree(clk_out);
+
+	for (j = 0; j < num_nodes; j++)
+		kfree(clk_out[j]);
+
 	return hw;
 }
 
-- 
2.7.4

[PATCH 4/4] clk: zynqmp: fix memory leak in zynqmp_register_clocks

[Jolly Shah]

From: Quanyang Wang <quanyang.wang@windriver.com>

This is detected by kmemleak running on zcu102 board:

unreferenced object 0xffffffc877e48180 (size 128):
comm "swapper/0", pid 1, jiffies 4294892909 (age 315.436s)
hex dump (first 32 bytes):
64 70 5f 76 69 64 65 6f 5f 72 65 66 5f 64 69 76 dp_video_ref_div
31 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1...............
backtrace:
[<00000000c9be883b>] __kmalloc_track_caller+0x200/0x380
[<00000000f02c3809>] kvasprintf+0x7c/0x100
[<00000000e51dde4d>] kasprintf+0x60/0x80
[<0000000092298b05>] zynqmp_register_clocks+0x29c/0x398
[<00000000faaff182>] zynqmp_clock_probe+0x3cc/0x4c0
[<000000005f5986f0>] platform_drv_probe+0x58/0xa8
[<00000000d5810136>] really_probe+0xd8/0x2a8
[<00000000f5b671be>] driver_probe_device+0x5c/0x100
[<0000000038f91fcf>] __device_attach_driver+0x98/0xb8
[<000000008a3f2ac2>] bus_for_each_drv+0x74/0xd8
[<000000001cb2783d>] __device_attach+0xe0/0x140
[<00000000c268031b>] device_initial_probe+0x24/0x30
[<000000006998de4b>] bus_probe_device+0x9c/0xa8
[<00000000647ae6ff>] device_add+0x3c0/0x610
[<0000000071c14bb8>] of_device_add+0x40/0x50
[<000000004bb5d132>] of_platform_device_create_pdata+0xbc/0x138

This is because that when num_nodes is larger than 1, clk_out is
allocated using kasprintf for these nodes but only the last node's
clk_out is freed.

Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
---
 drivers/clk/zynqmp/clkc.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/clk/zynqmp/clkc.c b/drivers/clk/zynqmp/clkc.c
index ff2d229..bfc1e7d 100644
--- a/drivers/clk/zynqmp/clkc.c
+++ b/drivers/clk/zynqmp/clkc.c
@@ -562,7 +562,7 @@ static struct clk_hw *zynqmp_register_clk_topology(int clk_id, char *clk_name,
 {
 	int j;
 	u32 num_nodes, clk_dev_id;
-	char *clk_out = NULL;
+	char *clk_out[MAX_NODES];
 	struct clock_topology *nodes;
 	struct clk_hw *hw = NULL;
 
@@ -576,16 +576,16 @@ static struct clk_hw *zynqmp_register_clk_topology(int clk_id, char *clk_name,
 		 * Intermediate clock names are postfixed with type of clock.
 		 */
 		if (j != (num_nodes - 1)) {
-			clk_out = kasprintf(GFP_KERNEL, "%s%s", clk_name,
+			clk_out[j] = kasprintf(GFP_KERNEL, "%s%s", clk_name,
 					    clk_type_postfix[nodes[j].type]);
 		} else {
-			clk_out = kasprintf(GFP_KERNEL, "%s", clk_name);
+			clk_out[j] = kasprintf(GFP_KERNEL, "%s", clk_name);
 		}
 
 		if (!clk_topology[nodes[j].type])
 			continue;
 
-		hw = (*clk_topology[nodes[j].type])(clk_out, clk_dev_id,
+		hw = (*clk_topology[nodes[j].type])(clk_out[j], clk_dev_id,
 						    parent_names,
 						    num_parents,
 						    &nodes[j]);
@@ -594,9 +594,12 @@ static struct clk_hw *zynqmp_register_clk_topology(int clk_id, char *clk_name,
 				     __func__,  clk_dev_id, clk_name,
 				     PTR_ERR(hw));
 
-		parent_names[0] = clk_out;
+		parent_names[0] = clk_out[j];
 	}
-	kfree(clk_out);
+
+	for (j = 0; j < num_nodes; j++)
+		kfree(clk_out[j]);
+
 	return hw;
 }
 
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 0/4] Clock driver fixes

[Jolly Shah]

A gentle reminder for review.

On 3/2/20, 1:43 PM, "Jolly Shah" <jolly.shah@xilinx.com> wrote:

    This patchset includes below fixes for clock driver
    1> Fix Divider2 calculation 
    2> Memory leak in clock registration
    3> Fix invalid name queries
    4> Limit bestdiv with maxdiv
    
    Quanyang Wang (1):
      clk: zynqmp: fix memory leak in zynqmp_register_clocks
    
    Rajan Vaja (2):
      clk: zynqmp: Limit bestdiv with maxdiv
      drivers: clk: Fix invalid clock name queries
    
    Tejas Patel (1):
      drivers: clk: zynqmp: Fix divider2 calculation
    
     drivers/clk/zynqmp/clkc.c    | 20 ++++++++++++++------
     drivers/clk/zynqmp/divider.c | 19 ++++++++++++++-----
     2 files changed, 28 insertions(+), 11 deletions(-)
    
    -- 
    2.7.4
    
    

Re: [PATCH 0/4] Clock driver fixes

[Jolly Shah]

A gentle reminder for review.

On 3/2/20, 1:43 PM, "Jolly Shah" <jolly.shah@xilinx.com> wrote:

    This patchset includes below fixes for clock driver
    1> Fix Divider2 calculation 
    2> Memory leak in clock registration
    3> Fix invalid name queries
    4> Limit bestdiv with maxdiv
    
    Quanyang Wang (1):
      clk: zynqmp: fix memory leak in zynqmp_register_clocks
    
    Rajan Vaja (2):
      clk: zynqmp: Limit bestdiv with maxdiv
      drivers: clk: Fix invalid clock name queries
    
    Tejas Patel (1):
      drivers: clk: zynqmp: Fix divider2 calculation
    
     drivers/clk/zynqmp/clkc.c    | 20 ++++++++++++++------
     drivers/clk/zynqmp/divider.c | 19 ++++++++++++++-----
     2 files changed, 28 insertions(+), 11 deletions(-)
    
    -- 
    2.7.4
    
    

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 0/4] Clock driver fixes

[Jolly Shah]

Please ignore below email. V2 patchset needs to be reviewed not below one.

Thanks,
Jolly Shah

On 3/23/20, 2:13 PM, "Jolly Shah" <JOLLYS@xilinx.com> wrote:

    A gentle reminder for review.
    
    On 3/2/20, 1:43 PM, "Jolly Shah" <jolly.shah@xilinx.com> wrote:
    
        This patchset includes below fixes for clock driver
        1> Fix Divider2 calculation 
        2> Memory leak in clock registration
        3> Fix invalid name queries
        4> Limit bestdiv with maxdiv
        
        Quanyang Wang (1):
          clk: zynqmp: fix memory leak in zynqmp_register_clocks
        
        Rajan Vaja (2):
          clk: zynqmp: Limit bestdiv with maxdiv
          drivers: clk: Fix invalid clock name queries
        
        Tejas Patel (1):
          drivers: clk: zynqmp: Fix divider2 calculation
        
         drivers/clk/zynqmp/clkc.c    | 20 ++++++++++++++------
         drivers/clk/zynqmp/divider.c | 19 ++++++++++++++-----
         2 files changed, 28 insertions(+), 11 deletions(-)
        
        -- 
        2.7.4
        
        
    
    

Re: [PATCH 0/4] Clock driver fixes

[Jolly Shah]

Please ignore below email. V2 patchset needs to be reviewed not below one.

Thanks,
Jolly Shah

On 3/23/20, 2:13 PM, "Jolly Shah" <JOLLYS@xilinx.com> wrote:

    A gentle reminder for review.
    
    On 3/2/20, 1:43 PM, "Jolly Shah" <jolly.shah@xilinx.com> wrote:
    
        This patchset includes below fixes for clock driver
        1> Fix Divider2 calculation 
        2> Memory leak in clock registration
        3> Fix invalid name queries
        4> Limit bestdiv with maxdiv
        
        Quanyang Wang (1):
          clk: zynqmp: fix memory leak in zynqmp_register_clocks
        
        Rajan Vaja (2):
          clk: zynqmp: Limit bestdiv with maxdiv
          drivers: clk: Fix invalid clock name queries
        
        Tejas Patel (1):
          drivers: clk: zynqmp: Fix divider2 calculation
        
         drivers/clk/zynqmp/clkc.c    | 20 ++++++++++++++------
         drivers/clk/zynqmp/divider.c | 19 ++++++++++++++-----
         2 files changed, 28 insertions(+), 11 deletions(-)
        
        -- 
        2.7.4
        
        
    
    

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel