[PATCH v2 0/4] Add support for Xilinx Versal SDHCI in Arasan driver

[PATCH v2 0/4] Add support for Xilinx Versal SDHCI in Arasan driver

[Manish Narani]

This patch series includes:
 -> Document the Xilinx Versal SD controller
 -> Add support for Versal SD Tap Delays
 -> Reorganizing the clock operations handling
 -> Resolve kernel-doc warnings

Changes in v2:
	- Addressed review comments given in v1
	- Changed clock operation handling for better modularity.
	- Changed comments to fix kernel-doc warnings

Manish Narani (4):
  dt-bindings: mmc: arasan: Document 'xlnx,versal-8.9a' controller
  sdhci: arasan: Add support for Versal Tap Delays
  mmc: sdhci-of-arasan: Modify clock operations handling
  mmc: sdhci-of-arasan: Fix kernel-doc warnings

 .../devicetree/bindings/mmc/arasan,sdhci.txt  |  15 +
 drivers/mmc/host/sdhci-of-arasan.c            | 473 +++++++++++++-----
 2 files changed, 361 insertions(+), 127 deletions(-)

-- 
2.17.1

[PATCH v2 0/4] Add support for Xilinx Versal SDHCI in Arasan driver

[Manish Narani]

This patch series includes:
 -> Document the Xilinx Versal SD controller
 -> Add support for Versal SD Tap Delays
 -> Reorganizing the clock operations handling
 -> Resolve kernel-doc warnings

Changes in v2:
	- Addressed review comments given in v1
	- Changed clock operation handling for better modularity.
	- Changed comments to fix kernel-doc warnings

Manish Narani (4):
  dt-bindings: mmc: arasan: Document 'xlnx,versal-8.9a' controller
  sdhci: arasan: Add support for Versal Tap Delays
  mmc: sdhci-of-arasan: Modify clock operations handling
  mmc: sdhci-of-arasan: Fix kernel-doc warnings

 .../devicetree/bindings/mmc/arasan,sdhci.txt  |  15 +
 drivers/mmc/host/sdhci-of-arasan.c            | 473 +++++++++++++-----
 2 files changed, 361 insertions(+), 127 deletions(-)

-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 1/4] dt-bindings: mmc: arasan: Document 'xlnx,versal-8.9a' controller

[Manish Narani]

Add documentation for 'xlnx,versal-8.9a' SDHCI controller followed by
example.

Signed-off-by: Manish Narani <manish.narani@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/mmc/arasan,sdhci.txt      | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
index 428685eb2ded..630fe707f5c4 100644
--- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
+++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
@@ -18,6 +18,9 @@ Required Properties:
     - "xlnx,zynqmp-8.9a": ZynqMP SDHCI 8.9a PHY
       For this device it is strongly suggested to include clock-output-names and
       #clock-cells.
+    - "xlnx,versal-8.9a": Versal SDHCI 8.9a PHY
+      For this device it is strongly suggested to include clock-output-names and
+      #clock-cells.
     - "ti,am654-sdhci-5.1", "arasan,sdhci-5.1": TI AM654 MMC PHY
 	Note: This binding has been deprecated and moved to [5].
     - "intel,lgm-sdhci-5.1-emmc", "arasan,sdhci-5.1": Intel LGM eMMC PHY
@@ -104,6 +107,18 @@ Example:
 		clk-phase-sd-hs = <63>, <72>;
 	};
 
+	sdhci: mmc@f1040000 {
+		compatible = "xlnx,versal-8.9a", "arasan,sdhci-8.9a";
+		interrupt-parent = <&gic>;
+		interrupts = <0 126 4>;
+		reg = <0x0 0xf1040000 0x0 0x10000>;
+		clocks = <&clk200>, <&clk200>;
+		clock-names = "clk_xin", "clk_ahb";
+		clock-output-names = "clk_out_sd0", "clk_in_sd0";
+		#clock-cells = <1>;
+		clk-phase-sd-hs = <132>, <60>;
+	};
+
 	emmc: sdhci@ec700000 {
 		compatible = "intel,lgm-sdhci-5.1-emmc", "arasan,sdhci-5.1";
 		reg = <0xec700000 0x300>;
-- 
2.17.1

[PATCH v2 1/4] dt-bindings: mmc: arasan: Document 'xlnx, versal-8.9a' controller

[Manish Narani]

Add documentation for 'xlnx,versal-8.9a' SDHCI controller followed by
example.

Signed-off-by: Manish Narani <manish.narani@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/mmc/arasan,sdhci.txt      | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
index 428685eb2ded..630fe707f5c4 100644
--- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
+++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
@@ -18,6 +18,9 @@ Required Properties:
     - "xlnx,zynqmp-8.9a": ZynqMP SDHCI 8.9a PHY
       For this device it is strongly suggested to include clock-output-names and
       #clock-cells.
+    - "xlnx,versal-8.9a": Versal SDHCI 8.9a PHY
+      For this device it is strongly suggested to include clock-output-names and
+      #clock-cells.
     - "ti,am654-sdhci-5.1", "arasan,sdhci-5.1": TI AM654 MMC PHY
 	Note: This binding has been deprecated and moved to [5].
     - "intel,lgm-sdhci-5.1-emmc", "arasan,sdhci-5.1": Intel LGM eMMC PHY
@@ -104,6 +107,18 @@ Example:
 		clk-phase-sd-hs = <63>, <72>;
 	};
 
+	sdhci: mmc@f1040000 {
+		compatible = "xlnx,versal-8.9a", "arasan,sdhci-8.9a";
+		interrupt-parent = <&gic>;
+		interrupts = <0 126 4>;
+		reg = <0x0 0xf1040000 0x0 0x10000>;
+		clocks = <&clk200>, <&clk200>;
+		clock-names = "clk_xin", "clk_ahb";
+		clock-output-names = "clk_out_sd0", "clk_in_sd0";
+		#clock-cells = <1>;
+		clk-phase-sd-hs = <132>, <60>;
+	};
+
 	emmc: sdhci@ec700000 {
 		compatible = "intel,lgm-sdhci-5.1-emmc", "arasan,sdhci-5.1";
 		reg = <0xec700000 0x300>;
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 2/4] sdhci: arasan: Add support for Versal Tap Delays

[Manish Narani]

Add support to set tap delays for Xilinx Versal SD controller. The tap
delay registers have moved to SD controller space in Versal. Make the
changes accordingly.

Signed-off-by: Manish Narani <manish.narani@xilinx.com>
---
 drivers/mmc/host/sdhci-of-arasan.c | 175 +++++++++++++++++++++++++++++
 1 file changed, 175 insertions(+)

diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index 0146d7dd315b..34403b2cac97 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -28,15 +28,26 @@
 #include "sdhci-pltfm.h"
 
 #define SDHCI_ARASAN_VENDOR_REGISTER	0x78
+
+#define SDHCI_ARASAN_ITAPDLY_REGISTER	0xF0F8
+#define SDHCI_ARASAN_OTAPDLY_REGISTER	0xF0FC
+
 #define SDHCI_ARASAN_CQE_BASE_ADDR	0x200
 #define VENDOR_ENHANCED_STROBE		BIT(0)
 
 #define PHY_CLK_TOO_SLOW_HZ		400000
 
+#define SDHCI_ITAPDLY_CHGWIN		0x200
+#define SDHCI_ITAPDLY_ENABLE		0x100
+#define SDHCI_OTAPDLY_ENABLE		0x40
+
 /* Default settings for ZynqMP Clock Phases */
 #define ZYNQMP_ICLK_PHASE {0, 63, 63, 0, 63,  0,   0, 183, 54,  0, 0}
 #define ZYNQMP_OCLK_PHASE {0, 72, 60, 0, 60, 72, 135, 48, 72, 135, 0}
 
+#define VERSAL_ICLK_PHASE {0, 132, 132, 0, 132, 0, 0, 162, 90, 0, 0}
+#define VERSAL_OCLK_PHASE {0,  60, 48, 0, 48, 72, 90, 36, 60, 90, 0}
+
 /*
  * On some SoCs the syscon area has a feature where the upper 16-bits of
  * each 32-bit register act as a write mask for the lower 16-bits.  This allows
@@ -566,6 +577,10 @@ static const struct of_device_id sdhci_arasan_of_match[] = {
 		.compatible = "xlnx,zynqmp-8.9a",
 		.data = &sdhci_arasan_zynqmp_data,
 	},
+	{
+		.compatible = "xlnx,versal-8.9a",
+		.data = &sdhci_arasan_zynqmp_data,
+	},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, sdhci_arasan_of_match);
@@ -768,6 +783,152 @@ static const struct clk_ops zynqmp_sampleclk_ops = {
 	.set_phase = sdhci_zynqmp_sampleclk_set_phase,
 };
 
+/**
+ * sdhci_versal_sdcardclk_set_phase - Set the SD Output Clock Tap Delays
+ *
+ * Set the SD Output Clock Tap Delays for Output path
+ *
+ * @hw:			Pointer to the hardware clock structure.
+ * @degrees		The clock phase shift between 0 - 359.
+ * Return: 0 on success and error value on error
+ */
+static int sdhci_versal_sdcardclk_set_phase(struct clk_hw *hw, int degrees)
+{
+	struct sdhci_arasan_clk_data *clk_data =
+		container_of(hw, struct sdhci_arasan_clk_data, sdcardclk_hw);
+	struct sdhci_arasan_data *sdhci_arasan =
+		container_of(clk_data, struct sdhci_arasan_data, clk_data);
+	struct sdhci_host *host = sdhci_arasan->host;
+	u8 tap_delay, tap_max = 0;
+	int ret;
+
+	/*
+	 * This is applicable for SDHCI_SPEC_300 and above
+	 * Versal does not set phase for <=25MHz clock.
+	 * If degrees is zero, no need to do anything.
+	 */
+	if (host->version < SDHCI_SPEC_300 ||
+	    host->timing == MMC_TIMING_LEGACY ||
+	    host->timing == MMC_TIMING_UHS_SDR12 || !degrees)
+		return 0;
+
+	switch (host->timing) {
+	case MMC_TIMING_MMC_HS:
+	case MMC_TIMING_SD_HS:
+	case MMC_TIMING_UHS_SDR25:
+	case MMC_TIMING_UHS_DDR50:
+	case MMC_TIMING_MMC_DDR52:
+		/* For 50MHz clock, 30 Taps are available */
+		tap_max = 30;
+		break;
+	case MMC_TIMING_UHS_SDR50:
+		/* For 100MHz clock, 15 Taps are available */
+		tap_max = 15;
+		break;
+	case MMC_TIMING_UHS_SDR104:
+	case MMC_TIMING_MMC_HS200:
+		/* For 200MHz clock, 8 Taps are available */
+		tap_max = 8;
+	default:
+		break;
+	}
+
+	tap_delay = (degrees * tap_max) / 360;
+
+	/* Set the Clock Phase */
+	if (tap_delay) {
+		u32 regval;
+
+		regval = sdhci_readl(host, SDHCI_ARASAN_OTAPDLY_REGISTER);
+		regval |= SDHCI_OTAPDLY_ENABLE;
+		sdhci_writel(host, regval, SDHCI_ARASAN_OTAPDLY_REGISTER);
+		regval |= tap_delay;
+		sdhci_writel(host, regval, SDHCI_ARASAN_OTAPDLY_REGISTER);
+	}
+
+	return ret;
+}
+
+static const struct clk_ops versal_sdcardclk_ops = {
+	.recalc_rate = sdhci_arasan_sdcardclk_recalc_rate,
+	.set_phase = sdhci_versal_sdcardclk_set_phase,
+};
+
+/**
+ * sdhci_versal_sampleclk_set_phase - Set the SD Input Clock Tap Delays
+ *
+ * Set the SD Input Clock Tap Delays for Input path
+ *
+ * @hw:			Pointer to the hardware clock structure.
+ * @degrees		The clock phase shift between 0 - 359.
+ * Return: 0 on success and error value on error
+ */
+static int sdhci_versal_sampleclk_set_phase(struct clk_hw *hw, int degrees)
+{
+	struct sdhci_arasan_clk_data *clk_data =
+		container_of(hw, struct sdhci_arasan_clk_data, sampleclk_hw);
+	struct sdhci_arasan_data *sdhci_arasan =
+		container_of(clk_data, struct sdhci_arasan_data, clk_data);
+	struct sdhci_host *host = sdhci_arasan->host;
+	u8 tap_delay, tap_max = 0;
+	int ret;
+
+	/*
+	 * This is applicable for SDHCI_SPEC_300 and above
+	 * Versal does not set phase for <=25MHz clock.
+	 * If degrees is zero, no need to do anything.
+	 */
+	if (host->version < SDHCI_SPEC_300 ||
+	    host->timing == MMC_TIMING_LEGACY ||
+	    host->timing == MMC_TIMING_UHS_SDR12 || !degrees)
+		return 0;
+
+	switch (host->timing) {
+	case MMC_TIMING_MMC_HS:
+	case MMC_TIMING_SD_HS:
+	case MMC_TIMING_UHS_SDR25:
+	case MMC_TIMING_UHS_DDR50:
+	case MMC_TIMING_MMC_DDR52:
+		/* For 50MHz clock, 120 Taps are available */
+		tap_max = 120;
+		break;
+	case MMC_TIMING_UHS_SDR50:
+		/* For 100MHz clock, 60 Taps are available */
+		tap_max = 60;
+		break;
+	case MMC_TIMING_UHS_SDR104:
+	case MMC_TIMING_MMC_HS200:
+		/* For 200MHz clock, 30 Taps are available */
+		tap_max = 30;
+	default:
+		break;
+	}
+
+	tap_delay = (degrees * tap_max) / 360;
+
+	/* Set the Clock Phase */
+	if (tap_delay) {
+		u32 regval;
+
+		regval = sdhci_readl(host, SDHCI_ARASAN_ITAPDLY_REGISTER);
+		regval |= SDHCI_ITAPDLY_CHGWIN;
+		sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER);
+		regval |= SDHCI_ITAPDLY_ENABLE;
+		sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER);
+		regval |= tap_delay;
+		sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER);
+		regval &= ~SDHCI_ITAPDLY_CHGWIN;
+		sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER);
+	}
+
+	return ret;
+}
+
+static const struct clk_ops versal_sampleclk_ops = {
+	.recalc_rate = sdhci_arasan_sampleclk_recalc_rate,
+	.set_phase = sdhci_versal_sampleclk_set_phase,
+};
+
 static void arasan_zynqmp_dll_reset(struct sdhci_host *host, u32 deviceid)
 {
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
@@ -965,6 +1126,16 @@ static void arasan_dt_parse_clk_phases(struct device *dev,
 		}
 	}
 
+	if (of_device_is_compatible(dev->of_node, "xlnx,versal-8.9a")) {
+		iclk_phase = (int [MMC_TIMING_MMC_HS400 + 1]) VERSAL_ICLK_PHASE;
+		oclk_phase = (int [MMC_TIMING_MMC_HS400 + 1]) VERSAL_OCLK_PHASE;
+
+		for (i = 0; i <= MMC_TIMING_MMC_HS400; i++) {
+			clk_data->clk_phase_in[i] = iclk_phase[i];
+			clk_data->clk_phase_out[i] = oclk_phase[i];
+		}
+	}
+
 	arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_LEGACY,
 				 "clk-phase-legacy");
 	arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_MMC_HS,
@@ -1025,6 +1196,8 @@ sdhci_arasan_register_sdcardclk(struct sdhci_arasan_data *sdhci_arasan,
 	sdcardclk_init.flags = CLK_GET_RATE_NOCACHE;
 	if (of_device_is_compatible(np, "xlnx,zynqmp-8.9a"))
 		sdcardclk_init.ops = &zynqmp_sdcardclk_ops;
+	else if (of_device_is_compatible(np, "xlnx,versal-8.9a"))
+		sdcardclk_init.ops = &versal_sdcardclk_ops;
 	else
 		sdcardclk_init.ops = &arasan_sdcardclk_ops;
 
@@ -1077,6 +1250,8 @@ sdhci_arasan_register_sampleclk(struct sdhci_arasan_data *sdhci_arasan,
 	sampleclk_init.flags = CLK_GET_RATE_NOCACHE;
 	if (of_device_is_compatible(np, "xlnx,zynqmp-8.9a"))
 		sampleclk_init.ops = &zynqmp_sampleclk_ops;
+	else if (of_device_is_compatible(np, "xlnx,versal-8.9a"))
+		sampleclk_init.ops = &versal_sampleclk_ops;
 	else
 		sampleclk_init.ops = &arasan_sampleclk_ops;
 
-- 
2.17.1

[PATCH v2 2/4] sdhci: arasan: Add support for Versal Tap Delays

[Manish Narani]

Add support to set tap delays for Xilinx Versal SD controller. The tap
delay registers have moved to SD controller space in Versal. Make the
changes accordingly.

Signed-off-by: Manish Narani <manish.narani@xilinx.com>
---
 drivers/mmc/host/sdhci-of-arasan.c | 175 +++++++++++++++++++++++++++++
 1 file changed, 175 insertions(+)

diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index 0146d7dd315b..34403b2cac97 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -28,15 +28,26 @@
 #include "sdhci-pltfm.h"
 
 #define SDHCI_ARASAN_VENDOR_REGISTER	0x78
+
+#define SDHCI_ARASAN_ITAPDLY_REGISTER	0xF0F8
+#define SDHCI_ARASAN_OTAPDLY_REGISTER	0xF0FC
+
 #define SDHCI_ARASAN_CQE_BASE_ADDR	0x200
 #define VENDOR_ENHANCED_STROBE		BIT(0)
 
 #define PHY_CLK_TOO_SLOW_HZ		400000
 
+#define SDHCI_ITAPDLY_CHGWIN		0x200
+#define SDHCI_ITAPDLY_ENABLE		0x100
+#define SDHCI_OTAPDLY_ENABLE		0x40
+
 /* Default settings for ZynqMP Clock Phases */
 #define ZYNQMP_ICLK_PHASE {0, 63, 63, 0, 63,  0,   0, 183, 54,  0, 0}
 #define ZYNQMP_OCLK_PHASE {0, 72, 60, 0, 60, 72, 135, 48, 72, 135, 0}
 
+#define VERSAL_ICLK_PHASE {0, 132, 132, 0, 132, 0, 0, 162, 90, 0, 0}
+#define VERSAL_OCLK_PHASE {0,  60, 48, 0, 48, 72, 90, 36, 60, 90, 0}
+
 /*
  * On some SoCs the syscon area has a feature where the upper 16-bits of
  * each 32-bit register act as a write mask for the lower 16-bits.  This allows
@@ -566,6 +577,10 @@ static const struct of_device_id sdhci_arasan_of_match[] = {
 		.compatible = "xlnx,zynqmp-8.9a",
 		.data = &sdhci_arasan_zynqmp_data,
 	},
+	{
+		.compatible = "xlnx,versal-8.9a",
+		.data = &sdhci_arasan_zynqmp_data,
+	},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, sdhci_arasan_of_match);
@@ -768,6 +783,152 @@ static const struct clk_ops zynqmp_sampleclk_ops = {
 	.set_phase = sdhci_zynqmp_sampleclk_set_phase,
 };
 
+/**
+ * sdhci_versal_sdcardclk_set_phase - Set the SD Output Clock Tap Delays
+ *
+ * Set the SD Output Clock Tap Delays for Output path
+ *
+ * @hw:			Pointer to the hardware clock structure.
+ * @degrees		The clock phase shift between 0 - 359.
+ * Return: 0 on success and error value on error
+ */
+static int sdhci_versal_sdcardclk_set_phase(struct clk_hw *hw, int degrees)
+{
+	struct sdhci_arasan_clk_data *clk_data =
+		container_of(hw, struct sdhci_arasan_clk_data, sdcardclk_hw);
+	struct sdhci_arasan_data *sdhci_arasan =
+		container_of(clk_data, struct sdhci_arasan_data, clk_data);
+	struct sdhci_host *host = sdhci_arasan->host;
+	u8 tap_delay, tap_max = 0;
+	int ret;
+
+	/*
+	 * This is applicable for SDHCI_SPEC_300 and above
+	 * Versal does not set phase for <=25MHz clock.
+	 * If degrees is zero, no need to do anything.
+	 */
+	if (host->version < SDHCI_SPEC_300 ||
+	    host->timing == MMC_TIMING_LEGACY ||
+	    host->timing == MMC_TIMING_UHS_SDR12 || !degrees)
+		return 0;
+
+	switch (host->timing) {
+	case MMC_TIMING_MMC_HS:
+	case MMC_TIMING_SD_HS:
+	case MMC_TIMING_UHS_SDR25:
+	case MMC_TIMING_UHS_DDR50:
+	case MMC_TIMING_MMC_DDR52:
+		/* For 50MHz clock, 30 Taps are available */
+		tap_max = 30;
+		break;
+	case MMC_TIMING_UHS_SDR50:
+		/* For 100MHz clock, 15 Taps are available */
+		tap_max = 15;
+		break;
+	case MMC_TIMING_UHS_SDR104:
+	case MMC_TIMING_MMC_HS200:
+		/* For 200MHz clock, 8 Taps are available */
+		tap_max = 8;
+	default:
+		break;
+	}
+
+	tap_delay = (degrees * tap_max) / 360;
+
+	/* Set the Clock Phase */
+	if (tap_delay) {
+		u32 regval;
+
+		regval = sdhci_readl(host, SDHCI_ARASAN_OTAPDLY_REGISTER);
+		regval |= SDHCI_OTAPDLY_ENABLE;
+		sdhci_writel(host, regval, SDHCI_ARASAN_OTAPDLY_REGISTER);
+		regval |= tap_delay;
+		sdhci_writel(host, regval, SDHCI_ARASAN_OTAPDLY_REGISTER);
+	}
+
+	return ret;
+}
+
+static const struct clk_ops versal_sdcardclk_ops = {
+	.recalc_rate = sdhci_arasan_sdcardclk_recalc_rate,
+	.set_phase = sdhci_versal_sdcardclk_set_phase,
+};
+
+/**
+ * sdhci_versal_sampleclk_set_phase - Set the SD Input Clock Tap Delays
+ *
+ * Set the SD Input Clock Tap Delays for Input path
+ *
+ * @hw:			Pointer to the hardware clock structure.
+ * @degrees		The clock phase shift between 0 - 359.
+ * Return: 0 on success and error value on error
+ */
+static int sdhci_versal_sampleclk_set_phase(struct clk_hw *hw, int degrees)
+{
+	struct sdhci_arasan_clk_data *clk_data =
+		container_of(hw, struct sdhci_arasan_clk_data, sampleclk_hw);
+	struct sdhci_arasan_data *sdhci_arasan =
+		container_of(clk_data, struct sdhci_arasan_data, clk_data);
+	struct sdhci_host *host = sdhci_arasan->host;
+	u8 tap_delay, tap_max = 0;
+	int ret;
+
+	/*
+	 * This is applicable for SDHCI_SPEC_300 and above
+	 * Versal does not set phase for <=25MHz clock.
+	 * If degrees is zero, no need to do anything.
+	 */
+	if (host->version < SDHCI_SPEC_300 ||
+	    host->timing == MMC_TIMING_LEGACY ||
+	    host->timing == MMC_TIMING_UHS_SDR12 || !degrees)
+		return 0;
+
+	switch (host->timing) {
+	case MMC_TIMING_MMC_HS:
+	case MMC_TIMING_SD_HS:
+	case MMC_TIMING_UHS_SDR25:
+	case MMC_TIMING_UHS_DDR50:
+	case MMC_TIMING_MMC_DDR52:
+		/* For 50MHz clock, 120 Taps are available */
+		tap_max = 120;
+		break;
+	case MMC_TIMING_UHS_SDR50:
+		/* For 100MHz clock, 60 Taps are available */
+		tap_max = 60;
+		break;
+	case MMC_TIMING_UHS_SDR104:
+	case MMC_TIMING_MMC_HS200:
+		/* For 200MHz clock, 30 Taps are available */
+		tap_max = 30;
+	default:
+		break;
+	}
+
+	tap_delay = (degrees * tap_max) / 360;
+
+	/* Set the Clock Phase */
+	if (tap_delay) {
+		u32 regval;
+
+		regval = sdhci_readl(host, SDHCI_ARASAN_ITAPDLY_REGISTER);
+		regval |= SDHCI_ITAPDLY_CHGWIN;
+		sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER);
+		regval |= SDHCI_ITAPDLY_ENABLE;
+		sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER);
+		regval |= tap_delay;
+		sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER);
+		regval &= ~SDHCI_ITAPDLY_CHGWIN;
+		sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER);
+	}
+
+	return ret;
+}
+
+static const struct clk_ops versal_sampleclk_ops = {
+	.recalc_rate = sdhci_arasan_sampleclk_recalc_rate,
+	.set_phase = sdhci_versal_sampleclk_set_phase,
+};
+
 static void arasan_zynqmp_dll_reset(struct sdhci_host *host, u32 deviceid)
 {
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
@@ -965,6 +1126,16 @@ static void arasan_dt_parse_clk_phases(struct device *dev,
 		}
 	}
 
+	if (of_device_is_compatible(dev->of_node, "xlnx,versal-8.9a")) {
+		iclk_phase = (int [MMC_TIMING_MMC_HS400 + 1]) VERSAL_ICLK_PHASE;
+		oclk_phase = (int [MMC_TIMING_MMC_HS400 + 1]) VERSAL_OCLK_PHASE;
+
+		for (i = 0; i <= MMC_TIMING_MMC_HS400; i++) {
+			clk_data->clk_phase_in[i] = iclk_phase[i];
+			clk_data->clk_phase_out[i] = oclk_phase[i];
+		}
+	}
+
 	arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_LEGACY,
 				 "clk-phase-legacy");
 	arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_MMC_HS,
@@ -1025,6 +1196,8 @@ sdhci_arasan_register_sdcardclk(struct sdhci_arasan_data *sdhci_arasan,
 	sdcardclk_init.flags = CLK_GET_RATE_NOCACHE;
 	if (of_device_is_compatible(np, "xlnx,zynqmp-8.9a"))
 		sdcardclk_init.ops = &zynqmp_sdcardclk_ops;
+	else if (of_device_is_compatible(np, "xlnx,versal-8.9a"))
+		sdcardclk_init.ops = &versal_sdcardclk_ops;
 	else
 		sdcardclk_init.ops = &arasan_sdcardclk_ops;
 
@@ -1077,6 +1250,8 @@ sdhci_arasan_register_sampleclk(struct sdhci_arasan_data *sdhci_arasan,
 	sampleclk_init.flags = CLK_GET_RATE_NOCACHE;
 	if (of_device_is_compatible(np, "xlnx,zynqmp-8.9a"))
 		sampleclk_init.ops = &zynqmp_sampleclk_ops;
+	else if (of_device_is_compatible(np, "xlnx,versal-8.9a"))
+		sampleclk_init.ops = &versal_sampleclk_ops;
 	else
 		sampleclk_init.ops = &arasan_sampleclk_ops;
 
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 3/4] mmc: sdhci-of-arasan: Modify clock operations handling

[Manish Narani]

The SDHCI clock operations are platform specific. So it better to define
them separately for particular platform. This will prevent multiple
if..else conditions and will make it easy for user to add their own
clock operations handlers.

Signed-off-by: Manish Narani <manish.narani@xilinx.com>
---
 drivers/mmc/host/sdhci-of-arasan.c | 208 +++++++++++++++++------------
 1 file changed, 119 insertions(+), 89 deletions(-)

diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index 34403b2cac97..89dbd1e9a830 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -87,6 +87,17 @@ struct sdhci_arasan_soc_ctl_map {
 	bool					hiword_update;
 };
 
+/**
+ * struct sdhci_arasan_clk_ops - Clock Operations for Arasan SD controller
+ *
+ * @sdcardclk_ops:	The output clock related operations
+ * @sampleclk_ops:	The sample clock related operations
+ */
+struct sdhci_arasan_clk_ops {
+	const struct clk_ops *sdcardclk_ops;
+	const struct clk_ops *sampleclk_ops;
+};
+
 /**
  * struct sdhci_arasan_clk_data
  * @sdcardclk_hw:	Struct for the clock we might provide to a PHY.
@@ -120,6 +131,7 @@ struct sdhci_arasan_zynqmp_clk_data {
  * @phy:		Pointer to the generic phy
  * @is_phy_on:		True if the PHY is on; false if not.
  * @clk_data:		Struct for the Arasan Controller Clock Data.
+ * @clk_ops:		Struct for the Arasan Controller Clock Operations.
  * @soc_ctl_base:	Pointer to regmap for syscon for soc_ctl registers.
  * @soc_ctl_map:	Map to get offsets into soc_ctl registers.
  */
@@ -131,6 +143,7 @@ struct sdhci_arasan_data {
 
 	bool		has_cqe;
 	struct sdhci_arasan_clk_data clk_data;
+	const struct sdhci_arasan_clk_ops *clk_ops;
 
 	struct regmap	*soc_ctl_base;
 	const struct sdhci_arasan_soc_ctl_map *soc_ctl_map;
@@ -146,6 +159,7 @@ struct sdhci_arasan_data {
 struct sdhci_arasan_of_data {
 	const struct sdhci_arasan_soc_ctl_map *soc_ctl_map;
 	const struct sdhci_pltfm_data *pdata;
+	const struct sdhci_arasan_clk_ops *clk_ops;
 };
 
 static const struct sdhci_arasan_soc_ctl_map rk3399_soc_ctl_map = {
@@ -357,29 +371,6 @@ static const struct sdhci_ops sdhci_arasan_ops = {
 	.set_power = sdhci_arasan_set_power,
 };
 
-static const struct sdhci_pltfm_data sdhci_arasan_pdata = {
-	.ops = &sdhci_arasan_ops,
-	.quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
-	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
-			SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN |
-			SDHCI_QUIRK2_STOP_WITH_TC,
-};
-
-static struct sdhci_arasan_of_data sdhci_arasan_data = {
-	.pdata = &sdhci_arasan_pdata,
-};
-
-static const struct sdhci_pltfm_data sdhci_arasan_zynqmp_pdata = {
-	.ops = &sdhci_arasan_ops,
-	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
-			SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN |
-			SDHCI_QUIRK2_STOP_WITH_TC,
-};
-
-static struct sdhci_arasan_of_data sdhci_arasan_zynqmp_data = {
-	.pdata = &sdhci_arasan_zynqmp_pdata,
-};
-
 static u32 sdhci_arasan_cqhci_irq(struct sdhci_host *host, u32 intmask)
 {
 	int cmd_error = 0;
@@ -436,21 +427,6 @@ static const struct sdhci_pltfm_data sdhci_arasan_cqe_pdata = {
 			SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN,
 };
 
-static struct sdhci_arasan_of_data sdhci_arasan_rk3399_data = {
-	.soc_ctl_map = &rk3399_soc_ctl_map,
-	.pdata = &sdhci_arasan_cqe_pdata,
-};
-
-static struct sdhci_arasan_of_data intel_lgm_emmc_data = {
-	.soc_ctl_map = &intel_lgm_emmc_soc_ctl_map,
-	.pdata = &sdhci_arasan_cqe_pdata,
-};
-
-static struct sdhci_arasan_of_data intel_lgm_sdxc_data = {
-	.soc_ctl_map = &intel_lgm_sdxc_soc_ctl_map,
-	.pdata = &sdhci_arasan_cqe_pdata,
-};
-
 #ifdef CONFIG_PM_SLEEP
 /**
  * sdhci_arasan_suspend - Suspend method for the driver
@@ -546,45 +522,6 @@ static int sdhci_arasan_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(sdhci_arasan_dev_pm_ops, sdhci_arasan_suspend,
 			 sdhci_arasan_resume);
 
-static const struct of_device_id sdhci_arasan_of_match[] = {
-	/* SoC-specific compatible strings w/ soc_ctl_map */
-	{
-		.compatible = "rockchip,rk3399-sdhci-5.1",
-		.data = &sdhci_arasan_rk3399_data,
-	},
-	{
-		.compatible = "intel,lgm-sdhci-5.1-emmc",
-		.data = &intel_lgm_emmc_data,
-	},
-	{
-		.compatible = "intel,lgm-sdhci-5.1-sdxc",
-		.data = &intel_lgm_sdxc_data,
-	},
-	/* Generic compatible below here */
-	{
-		.compatible = "arasan,sdhci-8.9a",
-		.data = &sdhci_arasan_data,
-	},
-	{
-		.compatible = "arasan,sdhci-5.1",
-		.data = &sdhci_arasan_data,
-	},
-	{
-		.compatible = "arasan,sdhci-4.9a",
-		.data = &sdhci_arasan_data,
-	},
-	{
-		.compatible = "xlnx,zynqmp-8.9a",
-		.data = &sdhci_arasan_zynqmp_data,
-	},
-	{
-		.compatible = "xlnx,versal-8.9a",
-		.data = &sdhci_arasan_zynqmp_data,
-	},
-	{ /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, sdhci_arasan_of_match);
-
 /**
  * sdhci_arasan_sdcardclk_recalc_rate - Return the card clock rate
  *
@@ -1160,6 +1097,108 @@ static void arasan_dt_parse_clk_phases(struct device *dev,
 				 "clk-phase-mmc-hs400");
 }
 
+static const struct sdhci_pltfm_data sdhci_arasan_pdata = {
+	.ops = &sdhci_arasan_ops,
+	.quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
+	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
+			SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN |
+			SDHCI_QUIRK2_STOP_WITH_TC,
+};
+
+static const struct sdhci_arasan_clk_ops arasan_clk_ops = {
+	.sdcardclk_ops = &arasan_sdcardclk_ops,
+	.sampleclk_ops = &arasan_sampleclk_ops,
+};
+
+static struct sdhci_arasan_of_data sdhci_arasan_data = {
+	.pdata = &sdhci_arasan_pdata,
+	.clk_ops = &arasan_clk_ops,
+};
+
+static struct sdhci_arasan_of_data sdhci_arasan_rk3399_data = {
+	.soc_ctl_map = &rk3399_soc_ctl_map,
+	.pdata = &sdhci_arasan_cqe_pdata,
+	.clk_ops = &arasan_clk_ops,
+};
+
+static struct sdhci_arasan_of_data intel_lgm_emmc_data = {
+	.soc_ctl_map = &intel_lgm_emmc_soc_ctl_map,
+	.pdata = &sdhci_arasan_cqe_pdata,
+	.clk_ops = &arasan_clk_ops,
+};
+
+static struct sdhci_arasan_of_data intel_lgm_sdxc_data = {
+	.soc_ctl_map = &intel_lgm_sdxc_soc_ctl_map,
+	.pdata = &sdhci_arasan_cqe_pdata,
+	.clk_ops = &arasan_clk_ops,
+};
+
+static const struct sdhci_pltfm_data sdhci_arasan_zynqmp_pdata = {
+	.ops = &sdhci_arasan_ops,
+	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
+			SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN |
+			SDHCI_QUIRK2_STOP_WITH_TC,
+};
+
+static const struct sdhci_arasan_clk_ops zynqmp_clk_ops = {
+	.sdcardclk_ops = &zynqmp_sdcardclk_ops,
+	.sampleclk_ops = &zynqmp_sampleclk_ops,
+};
+
+static struct sdhci_arasan_of_data sdhci_arasan_zynqmp_data = {
+	.pdata = &sdhci_arasan_zynqmp_pdata,
+	.clk_ops = &zynqmp_clk_ops,
+};
+
+static const struct sdhci_arasan_clk_ops versal_clk_ops = {
+	.sdcardclk_ops = &versal_sdcardclk_ops,
+	.sampleclk_ops = &versal_sampleclk_ops,
+};
+
+static struct sdhci_arasan_of_data sdhci_arasan_versal_data = {
+	.pdata = &sdhci_arasan_zynqmp_pdata,
+	.clk_ops = &versal_clk_ops,
+};
+
+static const struct of_device_id sdhci_arasan_of_match[] = {
+	/* SoC-specific compatible strings w/ soc_ctl_map */
+	{
+		.compatible = "rockchip,rk3399-sdhci-5.1",
+		.data = &sdhci_arasan_rk3399_data,
+	},
+	{
+		.compatible = "intel,lgm-sdhci-5.1-emmc",
+		.data = &intel_lgm_emmc_data,
+	},
+	{
+		.compatible = "intel,lgm-sdhci-5.1-sdxc",
+		.data = &intel_lgm_sdxc_data,
+	},
+	/* Generic compatible below here */
+	{
+		.compatible = "arasan,sdhci-8.9a",
+		.data = &sdhci_arasan_data,
+	},
+	{
+		.compatible = "arasan,sdhci-5.1",
+		.data = &sdhci_arasan_data,
+	},
+	{
+		.compatible = "arasan,sdhci-4.9a",
+		.data = &sdhci_arasan_data,
+	},
+	{
+		.compatible = "xlnx,zynqmp-8.9a",
+		.data = &sdhci_arasan_zynqmp_data,
+	},
+	{
+		.compatible = "xlnx,versal-8.9a",
+		.data = &sdhci_arasan_versal_data,
+	},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, sdhci_arasan_of_match);
+
 /**
  * sdhci_arasan_register_sdcardclk - Register the sdcardclk for a PHY to use
  *
@@ -1194,12 +1233,7 @@ sdhci_arasan_register_sdcardclk(struct sdhci_arasan_data *sdhci_arasan,
 	sdcardclk_init.parent_names = &parent_clk_name;
 	sdcardclk_init.num_parents = 1;
 	sdcardclk_init.flags = CLK_GET_RATE_NOCACHE;
-	if (of_device_is_compatible(np, "xlnx,zynqmp-8.9a"))
-		sdcardclk_init.ops = &zynqmp_sdcardclk_ops;
-	else if (of_device_is_compatible(np, "xlnx,versal-8.9a"))
-		sdcardclk_init.ops = &versal_sdcardclk_ops;
-	else
-		sdcardclk_init.ops = &arasan_sdcardclk_ops;
+	sdcardclk_init.ops = sdhci_arasan->clk_ops->sdcardclk_ops;
 
 	clk_data->sdcardclk_hw.init = &sdcardclk_init;
 	clk_data->sdcardclk =
@@ -1248,12 +1282,7 @@ sdhci_arasan_register_sampleclk(struct sdhci_arasan_data *sdhci_arasan,
 	sampleclk_init.parent_names = &parent_clk_name;
 	sampleclk_init.num_parents = 1;
 	sampleclk_init.flags = CLK_GET_RATE_NOCACHE;
-	if (of_device_is_compatible(np, "xlnx,zynqmp-8.9a"))
-		sampleclk_init.ops = &zynqmp_sampleclk_ops;
-	else if (of_device_is_compatible(np, "xlnx,versal-8.9a"))
-		sampleclk_init.ops = &versal_sampleclk_ops;
-	else
-		sampleclk_init.ops = &arasan_sampleclk_ops;
+	sampleclk_init.ops = sdhci_arasan->clk_ops->sampleclk_ops;
 
 	clk_data->sampleclk_hw.init = &sampleclk_init;
 	clk_data->sampleclk =
@@ -1401,6 +1430,7 @@ static int sdhci_arasan_probe(struct platform_device *pdev)
 	sdhci_arasan->host = host;
 
 	sdhci_arasan->soc_ctl_map = data->soc_ctl_map;
+	sdhci_arasan->clk_ops = data->clk_ops;
 
 	node = of_parse_phandle(pdev->dev.of_node, "arasan,soc-ctl-syscon", 0);
 	if (node) {
-- 
2.17.1

[PATCH v2 3/4] mmc: sdhci-of-arasan: Modify clock operations handling

[Manish Narani]

The SDHCI clock operations are platform specific. So it better to define
them separately for particular platform. This will prevent multiple
if..else conditions and will make it easy for user to add their own
clock operations handlers.

Signed-off-by: Manish Narani <manish.narani@xilinx.com>
---
 drivers/mmc/host/sdhci-of-arasan.c | 208 +++++++++++++++++------------
 1 file changed, 119 insertions(+), 89 deletions(-)

diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index 34403b2cac97..89dbd1e9a830 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -87,6 +87,17 @@ struct sdhci_arasan_soc_ctl_map {
 	bool					hiword_update;
 };
 
+/**
+ * struct sdhci_arasan_clk_ops - Clock Operations for Arasan SD controller
+ *
+ * @sdcardclk_ops:	The output clock related operations
+ * @sampleclk_ops:	The sample clock related operations
+ */
+struct sdhci_arasan_clk_ops {
+	const struct clk_ops *sdcardclk_ops;
+	const struct clk_ops *sampleclk_ops;
+};
+
 /**
  * struct sdhci_arasan_clk_data
  * @sdcardclk_hw:	Struct for the clock we might provide to a PHY.
@@ -120,6 +131,7 @@ struct sdhci_arasan_zynqmp_clk_data {
  * @phy:		Pointer to the generic phy
  * @is_phy_on:		True if the PHY is on; false if not.
  * @clk_data:		Struct for the Arasan Controller Clock Data.
+ * @clk_ops:		Struct for the Arasan Controller Clock Operations.
  * @soc_ctl_base:	Pointer to regmap for syscon for soc_ctl registers.
  * @soc_ctl_map:	Map to get offsets into soc_ctl registers.
  */
@@ -131,6 +143,7 @@ struct sdhci_arasan_data {
 
 	bool		has_cqe;
 	struct sdhci_arasan_clk_data clk_data;
+	const struct sdhci_arasan_clk_ops *clk_ops;
 
 	struct regmap	*soc_ctl_base;
 	const struct sdhci_arasan_soc_ctl_map *soc_ctl_map;
@@ -146,6 +159,7 @@ struct sdhci_arasan_data {
 struct sdhci_arasan_of_data {
 	const struct sdhci_arasan_soc_ctl_map *soc_ctl_map;
 	const struct sdhci_pltfm_data *pdata;
+	const struct sdhci_arasan_clk_ops *clk_ops;
 };
 
 static const struct sdhci_arasan_soc_ctl_map rk3399_soc_ctl_map = {
@@ -357,29 +371,6 @@ static const struct sdhci_ops sdhci_arasan_ops = {
 	.set_power = sdhci_arasan_set_power,
 };
 
-static const struct sdhci_pltfm_data sdhci_arasan_pdata = {
-	.ops = &sdhci_arasan_ops,
-	.quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
-	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
-			SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN |
-			SDHCI_QUIRK2_STOP_WITH_TC,
-};
-
-static struct sdhci_arasan_of_data sdhci_arasan_data = {
-	.pdata = &sdhci_arasan_pdata,
-};
-
-static const struct sdhci_pltfm_data sdhci_arasan_zynqmp_pdata = {
-	.ops = &sdhci_arasan_ops,
-	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
-			SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN |
-			SDHCI_QUIRK2_STOP_WITH_TC,
-};
-
-static struct sdhci_arasan_of_data sdhci_arasan_zynqmp_data = {
-	.pdata = &sdhci_arasan_zynqmp_pdata,
-};
-
 static u32 sdhci_arasan_cqhci_irq(struct sdhci_host *host, u32 intmask)
 {
 	int cmd_error = 0;
@@ -436,21 +427,6 @@ static const struct sdhci_pltfm_data sdhci_arasan_cqe_pdata = {
 			SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN,
 };
 
-static struct sdhci_arasan_of_data sdhci_arasan_rk3399_data = {
-	.soc_ctl_map = &rk3399_soc_ctl_map,
-	.pdata = &sdhci_arasan_cqe_pdata,
-};
-
-static struct sdhci_arasan_of_data intel_lgm_emmc_data = {
-	.soc_ctl_map = &intel_lgm_emmc_soc_ctl_map,
-	.pdata = &sdhci_arasan_cqe_pdata,
-};
-
-static struct sdhci_arasan_of_data intel_lgm_sdxc_data = {
-	.soc_ctl_map = &intel_lgm_sdxc_soc_ctl_map,
-	.pdata = &sdhci_arasan_cqe_pdata,
-};
-
 #ifdef CONFIG_PM_SLEEP
 /**
  * sdhci_arasan_suspend - Suspend method for the driver
@@ -546,45 +522,6 @@ static int sdhci_arasan_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(sdhci_arasan_dev_pm_ops, sdhci_arasan_suspend,
 			 sdhci_arasan_resume);
 
-static const struct of_device_id sdhci_arasan_of_match[] = {
-	/* SoC-specific compatible strings w/ soc_ctl_map */
-	{
-		.compatible = "rockchip,rk3399-sdhci-5.1",
-		.data = &sdhci_arasan_rk3399_data,
-	},
-	{
-		.compatible = "intel,lgm-sdhci-5.1-emmc",
-		.data = &intel_lgm_emmc_data,
-	},
-	{
-		.compatible = "intel,lgm-sdhci-5.1-sdxc",
-		.data = &intel_lgm_sdxc_data,
-	},
-	/* Generic compatible below here */
-	{
-		.compatible = "arasan,sdhci-8.9a",
-		.data = &sdhci_arasan_data,
-	},
-	{
-		.compatible = "arasan,sdhci-5.1",
-		.data = &sdhci_arasan_data,
-	},
-	{
-		.compatible = "arasan,sdhci-4.9a",
-		.data = &sdhci_arasan_data,
-	},
-	{
-		.compatible = "xlnx,zynqmp-8.9a",
-		.data = &sdhci_arasan_zynqmp_data,
-	},
-	{
-		.compatible = "xlnx,versal-8.9a",
-		.data = &sdhci_arasan_zynqmp_data,
-	},
-	{ /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, sdhci_arasan_of_match);
-
 /**
  * sdhci_arasan_sdcardclk_recalc_rate - Return the card clock rate
  *
@@ -1160,6 +1097,108 @@ static void arasan_dt_parse_clk_phases(struct device *dev,
 				 "clk-phase-mmc-hs400");
 }
 
+static const struct sdhci_pltfm_data sdhci_arasan_pdata = {
+	.ops = &sdhci_arasan_ops,
+	.quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
+	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
+			SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN |
+			SDHCI_QUIRK2_STOP_WITH_TC,
+};
+
+static const struct sdhci_arasan_clk_ops arasan_clk_ops = {
+	.sdcardclk_ops = &arasan_sdcardclk_ops,
+	.sampleclk_ops = &arasan_sampleclk_ops,
+};
+
+static struct sdhci_arasan_of_data sdhci_arasan_data = {
+	.pdata = &sdhci_arasan_pdata,
+	.clk_ops = &arasan_clk_ops,
+};
+
+static struct sdhci_arasan_of_data sdhci_arasan_rk3399_data = {
+	.soc_ctl_map = &rk3399_soc_ctl_map,
+	.pdata = &sdhci_arasan_cqe_pdata,
+	.clk_ops = &arasan_clk_ops,
+};
+
+static struct sdhci_arasan_of_data intel_lgm_emmc_data = {
+	.soc_ctl_map = &intel_lgm_emmc_soc_ctl_map,
+	.pdata = &sdhci_arasan_cqe_pdata,
+	.clk_ops = &arasan_clk_ops,
+};
+
+static struct sdhci_arasan_of_data intel_lgm_sdxc_data = {
+	.soc_ctl_map = &intel_lgm_sdxc_soc_ctl_map,
+	.pdata = &sdhci_arasan_cqe_pdata,
+	.clk_ops = &arasan_clk_ops,
+};
+
+static const struct sdhci_pltfm_data sdhci_arasan_zynqmp_pdata = {
+	.ops = &sdhci_arasan_ops,
+	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
+			SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN |
+			SDHCI_QUIRK2_STOP_WITH_TC,
+};
+
+static const struct sdhci_arasan_clk_ops zynqmp_clk_ops = {
+	.sdcardclk_ops = &zynqmp_sdcardclk_ops,
+	.sampleclk_ops = &zynqmp_sampleclk_ops,
+};
+
+static struct sdhci_arasan_of_data sdhci_arasan_zynqmp_data = {
+	.pdata = &sdhci_arasan_zynqmp_pdata,
+	.clk_ops = &zynqmp_clk_ops,
+};
+
+static const struct sdhci_arasan_clk_ops versal_clk_ops = {
+	.sdcardclk_ops = &versal_sdcardclk_ops,
+	.sampleclk_ops = &versal_sampleclk_ops,
+};
+
+static struct sdhci_arasan_of_data sdhci_arasan_versal_data = {
+	.pdata = &sdhci_arasan_zynqmp_pdata,
+	.clk_ops = &versal_clk_ops,
+};
+
+static const struct of_device_id sdhci_arasan_of_match[] = {
+	/* SoC-specific compatible strings w/ soc_ctl_map */
+	{
+		.compatible = "rockchip,rk3399-sdhci-5.1",
+		.data = &sdhci_arasan_rk3399_data,
+	},
+	{
+		.compatible = "intel,lgm-sdhci-5.1-emmc",
+		.data = &intel_lgm_emmc_data,
+	},
+	{
+		.compatible = "intel,lgm-sdhci-5.1-sdxc",
+		.data = &intel_lgm_sdxc_data,
+	},
+	/* Generic compatible below here */
+	{
+		.compatible = "arasan,sdhci-8.9a",
+		.data = &sdhci_arasan_data,
+	},
+	{
+		.compatible = "arasan,sdhci-5.1",
+		.data = &sdhci_arasan_data,
+	},
+	{
+		.compatible = "arasan,sdhci-4.9a",
+		.data = &sdhci_arasan_data,
+	},
+	{
+		.compatible = "xlnx,zynqmp-8.9a",
+		.data = &sdhci_arasan_zynqmp_data,
+	},
+	{
+		.compatible = "xlnx,versal-8.9a",
+		.data = &sdhci_arasan_versal_data,
+	},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, sdhci_arasan_of_match);
+
 /**
  * sdhci_arasan_register_sdcardclk - Register the sdcardclk for a PHY to use
  *
@@ -1194,12 +1233,7 @@ sdhci_arasan_register_sdcardclk(struct sdhci_arasan_data *sdhci_arasan,
 	sdcardclk_init.parent_names = &parent_clk_name;
 	sdcardclk_init.num_parents = 1;
 	sdcardclk_init.flags = CLK_GET_RATE_NOCACHE;
-	if (of_device_is_compatible(np, "xlnx,zynqmp-8.9a"))
-		sdcardclk_init.ops = &zynqmp_sdcardclk_ops;
-	else if (of_device_is_compatible(np, "xlnx,versal-8.9a"))
-		sdcardclk_init.ops = &versal_sdcardclk_ops;
-	else
-		sdcardclk_init.ops = &arasan_sdcardclk_ops;
+	sdcardclk_init.ops = sdhci_arasan->clk_ops->sdcardclk_ops;
 
 	clk_data->sdcardclk_hw.init = &sdcardclk_init;
 	clk_data->sdcardclk =
@@ -1248,12 +1282,7 @@ sdhci_arasan_register_sampleclk(struct sdhci_arasan_data *sdhci_arasan,
 	sampleclk_init.parent_names = &parent_clk_name;
 	sampleclk_init.num_parents = 1;
 	sampleclk_init.flags = CLK_GET_RATE_NOCACHE;
-	if (of_device_is_compatible(np, "xlnx,zynqmp-8.9a"))
-		sampleclk_init.ops = &zynqmp_sampleclk_ops;
-	else if (of_device_is_compatible(np, "xlnx,versal-8.9a"))
-		sampleclk_init.ops = &versal_sampleclk_ops;
-	else
-		sampleclk_init.ops = &arasan_sampleclk_ops;
+	sampleclk_init.ops = sdhci_arasan->clk_ops->sampleclk_ops;
 
 	clk_data->sampleclk_hw.init = &sampleclk_init;
 	clk_data->sampleclk =
@@ -1401,6 +1430,7 @@ static int sdhci_arasan_probe(struct platform_device *pdev)
 	sdhci_arasan->host = host;
 
 	sdhci_arasan->soc_ctl_map = data->soc_ctl_map;
+	sdhci_arasan->clk_ops = data->clk_ops;
 
 	node = of_parse_phandle(pdev->dev.of_node, "arasan,soc-ctl-syscon", 0);
 	if (node) {
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 4/4] mmc: sdhci-of-arasan: Fix kernel-doc warnings

[Manish Narani]

Modify code to fix the warnings reported by kernel-doc for better
documentation.

Signed-off-by: Manish Narani <manish.narani@xilinx.com>
---
 drivers/mmc/host/sdhci-of-arasan.c | 114 ++++++++++++++++-------------
 1 file changed, 64 insertions(+), 50 deletions(-)

diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index 89dbd1e9a830..0396d6b5396a 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -73,13 +73,13 @@ struct sdhci_arasan_soc_ctl_field {
 /**
  * struct sdhci_arasan_soc_ctl_map - Map in syscon to corecfg registers
  *
- * It's up to the licensee of the Arsan IP block to make these available
- * somewhere if needed.  Presumably these will be scattered somewhere that's
- * accessible via the syscon API.
- *
  * @baseclkfreq:	Where to find corecfg_baseclkfreq
  * @clockmultiplier:	Where to find corecfg_clockmultiplier
  * @hiword_update:	If true, use HIWORD_UPDATE to access the syscon
+ *
+ * It's up to the licensee of the Arsan IP block to make these available
+ * somewhere if needed.  Presumably these will be scattered somewhere that's
+ * accessible via the syscon API.
  */
 struct sdhci_arasan_soc_ctl_map {
 	struct sdhci_arasan_soc_ctl_field	baseclkfreq;
@@ -99,7 +99,8 @@ struct sdhci_arasan_clk_ops {
 };
 
 /**
- * struct sdhci_arasan_clk_data
+ * struct sdhci_arasan_clk_data - Arasan Controller Clock Data.
+ *
  * @sdcardclk_hw:	Struct for the clock we might provide to a PHY.
  * @sdcardclk:		Pointer to normal 'struct clock' for sdcardclk_hw.
  * @sampleclk_hw:	Struct for the clock we might provide to a PHY.
@@ -125,15 +126,18 @@ struct sdhci_arasan_zynqmp_clk_data {
 };
 
 /**
- * struct sdhci_arasan_data
+ * struct sdhci_arasan_data - Arasan Controller Data
+ *
  * @host:		Pointer to the main SDHCI host structure.
  * @clk_ahb:		Pointer to the AHB clock
  * @phy:		Pointer to the generic phy
  * @is_phy_on:		True if the PHY is on; false if not.
+ * @has_cqe:		True if controller has command queuing engine.
  * @clk_data:		Struct for the Arasan Controller Clock Data.
  * @clk_ops:		Struct for the Arasan Controller Clock Operations.
  * @soc_ctl_base:	Pointer to regmap for syscon for soc_ctl registers.
  * @soc_ctl_map:	Map to get offsets into soc_ctl registers.
+ * @quirks:		Arasan deviations from spec.
  */
 struct sdhci_arasan_data {
 	struct sdhci_host *host;
@@ -147,7 +151,7 @@ struct sdhci_arasan_data {
 
 	struct regmap	*soc_ctl_base;
 	const struct sdhci_arasan_soc_ctl_map *soc_ctl_map;
-	unsigned int	quirks; /* Arasan deviations from spec */
+	unsigned int	quirks;
 
 /* Controller does not have CD wired and will not function normally without */
 #define SDHCI_ARASAN_QUIRK_FORCE_CDTEST	BIT(0)
@@ -183,14 +187,16 @@ static const struct sdhci_arasan_soc_ctl_map intel_lgm_sdxc_soc_ctl_map = {
 /**
  * sdhci_arasan_syscon_write - Write to a field in soc_ctl registers
  *
+ * @host:	The sdhci_host
+ * @fld:	The field to write to
+ * @val:	The value to write
+ *
  * This function allows writing to fields in sdhci_arasan_soc_ctl_map.
  * Note that if a field is specified as not available (shift < 0) then
  * this function will silently return an error code.  It will be noisy
  * and print errors for any other (unexpected) errors.
  *
- * @host:	The sdhci_host
- * @fld:	The field to write to
- * @val:	The value to write
+ * Return: 0 on success and error value on error
  */
 static int sdhci_arasan_syscon_write(struct sdhci_host *host,
 				   const struct sdhci_arasan_soc_ctl_field *fld,
@@ -431,9 +437,10 @@ static const struct sdhci_pltfm_data sdhci_arasan_cqe_pdata = {
 /**
  * sdhci_arasan_suspend - Suspend method for the driver
  * @dev:	Address of the device structure
- * Returns 0 on success and error value on error
  *
  * Put the device in a low power state.
+ *
+ * Return: 0 on success and error value on error
  */
 static int sdhci_arasan_suspend(struct device *dev)
 {
@@ -474,9 +481,10 @@ static int sdhci_arasan_suspend(struct device *dev)
 /**
  * sdhci_arasan_resume - Resume method for the driver
  * @dev:	Address of the device structure
- * Returns 0 on success and error value on error
  *
  * Resume operation after suspend
+ *
+ * Return: 0 on success and error value on error
  */
 static int sdhci_arasan_resume(struct device *dev)
 {
@@ -525,16 +533,16 @@ static SIMPLE_DEV_PM_OPS(sdhci_arasan_dev_pm_ops, sdhci_arasan_suspend,
 /**
  * sdhci_arasan_sdcardclk_recalc_rate - Return the card clock rate
  *
+ * @hw:			Pointer to the hardware clock structure.
+ * @parent_rate:		The parent rate (should be rate of clk_xin).
+ *
  * Return the current actual rate of the SD card clock.  This can be used
  * to communicate with out PHY.
  *
- * @hw:			Pointer to the hardware clock structure.
- * @parent_rate		The parent rate (should be rate of clk_xin).
- * Returns the card clock rate.
+ * Return: The card clock rate.
  */
 static unsigned long sdhci_arasan_sdcardclk_recalc_rate(struct clk_hw *hw,
 						      unsigned long parent_rate)
-
 {
 	struct sdhci_arasan_clk_data *clk_data =
 		container_of(hw, struct sdhci_arasan_clk_data, sdcardclk_hw);
@@ -552,16 +560,16 @@ static const struct clk_ops arasan_sdcardclk_ops = {
 /**
  * sdhci_arasan_sampleclk_recalc_rate - Return the sampling clock rate
  *
+ * @hw:			Pointer to the hardware clock structure.
+ * @parent_rate:		The parent rate (should be rate of clk_xin).
+ *
  * Return the current actual rate of the sampling clock.  This can be used
  * to communicate with out PHY.
  *
- * @hw:			Pointer to the hardware clock structure.
- * @parent_rate		The parent rate (should be rate of clk_xin).
- * Returns the sample clock rate.
+ * Return: The sample clock rate.
  */
 static unsigned long sdhci_arasan_sampleclk_recalc_rate(struct clk_hw *hw,
 						      unsigned long parent_rate)
-
 {
 	struct sdhci_arasan_clk_data *clk_data =
 		container_of(hw, struct sdhci_arasan_clk_data, sampleclk_hw);
@@ -579,14 +587,14 @@ static const struct clk_ops arasan_sampleclk_ops = {
 /**
  * sdhci_zynqmp_sdcardclk_set_phase - Set the SD Output Clock Tap Delays
  *
+ * @hw:			Pointer to the hardware clock structure.
+ * @degrees:		The clock phase shift between 0 - 359.
+ *
  * Set the SD Output Clock Tap Delays for Output path
  *
- * @hw:			Pointer to the hardware clock structure.
- * @degrees		The clock phase shift between 0 - 359.
  * Return: 0 on success and error value on error
  */
 static int sdhci_zynqmp_sdcardclk_set_phase(struct clk_hw *hw, int degrees)
-
 {
 	struct sdhci_arasan_clk_data *clk_data =
 		container_of(hw, struct sdhci_arasan_clk_data, sdcardclk_hw);
@@ -651,14 +659,14 @@ static const struct clk_ops zynqmp_sdcardclk_ops = {
 /**
  * sdhci_zynqmp_sampleclk_set_phase - Set the SD Input Clock Tap Delays
  *
+ * @hw:			Pointer to the hardware clock structure.
+ * @degrees:		The clock phase shift between 0 - 359.
+ *
  * Set the SD Input Clock Tap Delays for Input path
  *
- * @hw:			Pointer to the hardware clock structure.
- * @degrees		The clock phase shift between 0 - 359.
  * Return: 0 on success and error value on error
  */
 static int sdhci_zynqmp_sampleclk_set_phase(struct clk_hw *hw, int degrees)
-
 {
 	struct sdhci_arasan_clk_data *clk_data =
 		container_of(hw, struct sdhci_arasan_clk_data, sampleclk_hw);
@@ -723,10 +731,11 @@ static const struct clk_ops zynqmp_sampleclk_ops = {
 /**
  * sdhci_versal_sdcardclk_set_phase - Set the SD Output Clock Tap Delays
  *
+ * @hw:			Pointer to the hardware clock structure.
+ * @degrees:		The clock phase shift between 0 - 359.
+ *
  * Set the SD Output Clock Tap Delays for Output path
  *
- * @hw:			Pointer to the hardware clock structure.
- * @degrees		The clock phase shift between 0 - 359.
  * Return: 0 on success and error value on error
  */
 static int sdhci_versal_sdcardclk_set_phase(struct clk_hw *hw, int degrees)
@@ -794,10 +803,11 @@ static const struct clk_ops versal_sdcardclk_ops = {
 /**
  * sdhci_versal_sampleclk_set_phase - Set the SD Input Clock Tap Delays
  *
+ * @hw:			Pointer to the hardware clock structure.
+ * @degrees:		The clock phase shift between 0 - 359.
+ *
  * Set the SD Input Clock Tap Delays for Input path
  *
- * @hw:			Pointer to the hardware clock structure.
- * @degrees		The clock phase shift between 0 - 359.
  * Return: 0 on success and error value on error
  */
 static int sdhci_versal_sampleclk_set_phase(struct clk_hw *hw, int degrees)
@@ -913,6 +923,9 @@ static int arasan_zynqmp_execute_tuning(struct mmc_host *mmc, u32 opcode)
 /**
  * sdhci_arasan_update_clockmultiplier - Set corecfg_clockmultiplier
  *
+ * @host:		The sdhci_host
+ * @value:		The value to write
+ *
  * The corecfg_clockmultiplier is supposed to contain clock multiplier
  * value of programmable clock generator.
  *
@@ -924,8 +937,6 @@ static int arasan_zynqmp_execute_tuning(struct mmc_host *mmc, u32 opcode)
  * - The value of corecfg_clockmultiplier should sync with that of corresponding
  *   value reading from sdhci_capability_register. So this function is called
  *   once at probe time and never called again.
- *
- * @host:		The sdhci_host
  */
 static void sdhci_arasan_update_clockmultiplier(struct sdhci_host *host,
 						u32 value)
@@ -952,6 +963,8 @@ static void sdhci_arasan_update_clockmultiplier(struct sdhci_host *host,
 /**
  * sdhci_arasan_update_baseclkfreq - Set corecfg_baseclkfreq
  *
+ * @host:		The sdhci_host
+ *
  * The corecfg_baseclkfreq is supposed to contain the MHz of clk_xin.  This
  * function can be used to make that happen.
  *
@@ -963,8 +976,6 @@ static void sdhci_arasan_update_clockmultiplier(struct sdhci_host *host,
  * - It's assumed that clk_xin is not dynamic and that we use the SDHCI divider
  *   to achieve lower clock rates.  That means that this function is called once
  *   at probe time and never called again.
- *
- * @host:		The sdhci_host
  */
 static void sdhci_arasan_update_baseclkfreq(struct sdhci_host *host)
 {
@@ -1028,10 +1039,10 @@ static void arasan_dt_read_clk_phase(struct device *dev,
 /**
  * arasan_dt_parse_clk_phases - Read Clock Delay values from DT
  *
- * Called at initialization to parse the values of Clock Delays.
- *
  * @dev:		Pointer to our struct device.
  * @clk_data:		Pointer to the Clock Data structure
+ *
+ * Called at initialization to parse the values of Clock Delays.
  */
 static void arasan_dt_parse_clk_phases(struct device *dev,
 				       struct sdhci_arasan_clk_data *clk_data)
@@ -1202,14 +1213,15 @@ MODULE_DEVICE_TABLE(of, sdhci_arasan_of_match);
 /**
  * sdhci_arasan_register_sdcardclk - Register the sdcardclk for a PHY to use
  *
+ * @sdhci_arasan:	Our private data structure.
+ * @clk_xin:		Pointer to the functional clock
+ * @dev:		Pointer to our struct device.
+ *
  * Some PHY devices need to know what the actual card clock is.  In order for
  * them to find out, we'll provide a clock through the common clock framework
  * for them to query.
  *
- * @sdhci_arasan:	Our private data structure.
- * @clk_xin:		Pointer to the functional clock
- * @dev:		Pointer to our struct device.
- * Returns 0 on success and error value on error
+ * Return: 0 on success and error value on error
  */
 static int
 sdhci_arasan_register_sdcardclk(struct sdhci_arasan_data *sdhci_arasan,
@@ -1251,14 +1263,15 @@ sdhci_arasan_register_sdcardclk(struct sdhci_arasan_data *sdhci_arasan,
 /**
  * sdhci_arasan_register_sampleclk - Register the sampleclk for a PHY to use
  *
+ * @sdhci_arasan:	Our private data structure.
+ * @clk_xin:		Pointer to the functional clock
+ * @dev:		Pointer to our struct device.
+ *
  * Some PHY devices need to know what the actual card clock is.  In order for
  * them to find out, we'll provide a clock through the common clock framework
  * for them to query.
  *
- * @sdhci_arasan:	Our private data structure.
- * @clk_xin:		Pointer to the functional clock
- * @dev:		Pointer to our struct device.
- * Returns 0 on success and error value on error
+ * Return: 0 on success and error value on error
  */
 static int
 sdhci_arasan_register_sampleclk(struct sdhci_arasan_data *sdhci_arasan,
@@ -1300,10 +1313,10 @@ sdhci_arasan_register_sampleclk(struct sdhci_arasan_data *sdhci_arasan,
 /**
  * sdhci_arasan_unregister_sdclk - Undoes sdhci_arasan_register_sdclk()
  *
+ * @dev:		Pointer to our struct device.
+ *
  * Should be called any time we're exiting and sdhci_arasan_register_sdclk()
  * returned success.
- *
- * @dev:		Pointer to our struct device.
  */
 static void sdhci_arasan_unregister_sdclk(struct device *dev)
 {
@@ -1318,6 +1331,10 @@ static void sdhci_arasan_unregister_sdclk(struct device *dev)
 /**
  * sdhci_arasan_register_sdclk - Register the sdcardclk for a PHY to use
  *
+ * @sdhci_arasan:	Our private data structure.
+ * @clk_xin:		Pointer to the functional clock
+ * @dev:		Pointer to our struct device.
+ *
  * Some PHY devices need to know what the actual card clock is.  In order for
  * them to find out, we'll provide a clock through the common clock framework
  * for them to query.
@@ -1330,10 +1347,7 @@ static void sdhci_arasan_unregister_sdclk(struct device *dev)
  * to create nice clean device tree bindings and later (if needed) we can try
  * re-architecting SDHCI if we see some benefit to it.
  *
- * @sdhci_arasan:	Our private data structure.
- * @clk_xin:		Pointer to the functional clock
- * @dev:		Pointer to our struct device.
- * Returns 0 on success and error value on error
+ * Return: 0 on success and error value on error
  */
 static int sdhci_arasan_register_sdclk(struct sdhci_arasan_data *sdhci_arasan,
 				       struct clk *clk_xin,
-- 
2.17.1

[PATCH v2 4/4] mmc: sdhci-of-arasan: Fix kernel-doc warnings

[Manish Narani]

Modify code to fix the warnings reported by kernel-doc for better
documentation.

Signed-off-by: Manish Narani <manish.narani@xilinx.com>
---
 drivers/mmc/host/sdhci-of-arasan.c | 114 ++++++++++++++++-------------
 1 file changed, 64 insertions(+), 50 deletions(-)

diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index 89dbd1e9a830..0396d6b5396a 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -73,13 +73,13 @@ struct sdhci_arasan_soc_ctl_field {
 /**
  * struct sdhci_arasan_soc_ctl_map - Map in syscon to corecfg registers
  *
- * It's up to the licensee of the Arsan IP block to make these available
- * somewhere if needed.  Presumably these will be scattered somewhere that's
- * accessible via the syscon API.
- *
  * @baseclkfreq:	Where to find corecfg_baseclkfreq
  * @clockmultiplier:	Where to find corecfg_clockmultiplier
  * @hiword_update:	If true, use HIWORD_UPDATE to access the syscon
+ *
+ * It's up to the licensee of the Arsan IP block to make these available
+ * somewhere if needed.  Presumably these will be scattered somewhere that's
+ * accessible via the syscon API.
  */
 struct sdhci_arasan_soc_ctl_map {
 	struct sdhci_arasan_soc_ctl_field	baseclkfreq;
@@ -99,7 +99,8 @@ struct sdhci_arasan_clk_ops {
 };
 
 /**
- * struct sdhci_arasan_clk_data
+ * struct sdhci_arasan_clk_data - Arasan Controller Clock Data.
+ *
  * @sdcardclk_hw:	Struct for the clock we might provide to a PHY.
  * @sdcardclk:		Pointer to normal 'struct clock' for sdcardclk_hw.
  * @sampleclk_hw:	Struct for the clock we might provide to a PHY.
@@ -125,15 +126,18 @@ struct sdhci_arasan_zynqmp_clk_data {
 };
 
 /**
- * struct sdhci_arasan_data
+ * struct sdhci_arasan_data - Arasan Controller Data
+ *
  * @host:		Pointer to the main SDHCI host structure.
  * @clk_ahb:		Pointer to the AHB clock
  * @phy:		Pointer to the generic phy
  * @is_phy_on:		True if the PHY is on; false if not.
+ * @has_cqe:		True if controller has command queuing engine.
  * @clk_data:		Struct for the Arasan Controller Clock Data.
  * @clk_ops:		Struct for the Arasan Controller Clock Operations.
  * @soc_ctl_base:	Pointer to regmap for syscon for soc_ctl registers.
  * @soc_ctl_map:	Map to get offsets into soc_ctl registers.
+ * @quirks:		Arasan deviations from spec.
  */
 struct sdhci_arasan_data {
 	struct sdhci_host *host;
@@ -147,7 +151,7 @@ struct sdhci_arasan_data {
 
 	struct regmap	*soc_ctl_base;
 	const struct sdhci_arasan_soc_ctl_map *soc_ctl_map;
-	unsigned int	quirks; /* Arasan deviations from spec */
+	unsigned int	quirks;
 
 /* Controller does not have CD wired and will not function normally without */
 #define SDHCI_ARASAN_QUIRK_FORCE_CDTEST	BIT(0)
@@ -183,14 +187,16 @@ static const struct sdhci_arasan_soc_ctl_map intel_lgm_sdxc_soc_ctl_map = {
 /**
  * sdhci_arasan_syscon_write - Write to a field in soc_ctl registers
  *
+ * @host:	The sdhci_host
+ * @fld:	The field to write to
+ * @val:	The value to write
+ *
  * This function allows writing to fields in sdhci_arasan_soc_ctl_map.
  * Note that if a field is specified as not available (shift < 0) then
  * this function will silently return an error code.  It will be noisy
  * and print errors for any other (unexpected) errors.
  *
- * @host:	The sdhci_host
- * @fld:	The field to write to
- * @val:	The value to write
+ * Return: 0 on success and error value on error
  */
 static int sdhci_arasan_syscon_write(struct sdhci_host *host,
 				   const struct sdhci_arasan_soc_ctl_field *fld,
@@ -431,9 +437,10 @@ static const struct sdhci_pltfm_data sdhci_arasan_cqe_pdata = {
 /**
  * sdhci_arasan_suspend - Suspend method for the driver
  * @dev:	Address of the device structure
- * Returns 0 on success and error value on error
  *
  * Put the device in a low power state.
+ *
+ * Return: 0 on success and error value on error
  */
 static int sdhci_arasan_suspend(struct device *dev)
 {
@@ -474,9 +481,10 @@ static int sdhci_arasan_suspend(struct device *dev)
 /**
  * sdhci_arasan_resume - Resume method for the driver
  * @dev:	Address of the device structure
- * Returns 0 on success and error value on error
  *
  * Resume operation after suspend
+ *
+ * Return: 0 on success and error value on error
  */
 static int sdhci_arasan_resume(struct device *dev)
 {
@@ -525,16 +533,16 @@ static SIMPLE_DEV_PM_OPS(sdhci_arasan_dev_pm_ops, sdhci_arasan_suspend,
 /**
  * sdhci_arasan_sdcardclk_recalc_rate - Return the card clock rate
  *
+ * @hw:			Pointer to the hardware clock structure.
+ * @parent_rate:		The parent rate (should be rate of clk_xin).
+ *
  * Return the current actual rate of the SD card clock.  This can be used
  * to communicate with out PHY.
  *
- * @hw:			Pointer to the hardware clock structure.
- * @parent_rate		The parent rate (should be rate of clk_xin).
- * Returns the card clock rate.
+ * Return: The card clock rate.
  */
 static unsigned long sdhci_arasan_sdcardclk_recalc_rate(struct clk_hw *hw,
 						      unsigned long parent_rate)
-
 {
 	struct sdhci_arasan_clk_data *clk_data =
 		container_of(hw, struct sdhci_arasan_clk_data, sdcardclk_hw);
@@ -552,16 +560,16 @@ static const struct clk_ops arasan_sdcardclk_ops = {
 /**
  * sdhci_arasan_sampleclk_recalc_rate - Return the sampling clock rate
  *
+ * @hw:			Pointer to the hardware clock structure.
+ * @parent_rate:		The parent rate (should be rate of clk_xin).
+ *
  * Return the current actual rate of the sampling clock.  This can be used
  * to communicate with out PHY.
  *
- * @hw:			Pointer to the hardware clock structure.
- * @parent_rate		The parent rate (should be rate of clk_xin).
- * Returns the sample clock rate.
+ * Return: The sample clock rate.
  */
 static unsigned long sdhci_arasan_sampleclk_recalc_rate(struct clk_hw *hw,
 						      unsigned long parent_rate)
-
 {
 	struct sdhci_arasan_clk_data *clk_data =
 		container_of(hw, struct sdhci_arasan_clk_data, sampleclk_hw);
@@ -579,14 +587,14 @@ static const struct clk_ops arasan_sampleclk_ops = {
 /**
  * sdhci_zynqmp_sdcardclk_set_phase - Set the SD Output Clock Tap Delays
  *
+ * @hw:			Pointer to the hardware clock structure.
+ * @degrees:		The clock phase shift between 0 - 359.
+ *
  * Set the SD Output Clock Tap Delays for Output path
  *
- * @hw:			Pointer to the hardware clock structure.
- * @degrees		The clock phase shift between 0 - 359.
  * Return: 0 on success and error value on error
  */
 static int sdhci_zynqmp_sdcardclk_set_phase(struct clk_hw *hw, int degrees)
-
 {
 	struct sdhci_arasan_clk_data *clk_data =
 		container_of(hw, struct sdhci_arasan_clk_data, sdcardclk_hw);
@@ -651,14 +659,14 @@ static const struct clk_ops zynqmp_sdcardclk_ops = {
 /**
  * sdhci_zynqmp_sampleclk_set_phase - Set the SD Input Clock Tap Delays
  *
+ * @hw:			Pointer to the hardware clock structure.
+ * @degrees:		The clock phase shift between 0 - 359.
+ *
  * Set the SD Input Clock Tap Delays for Input path
  *
- * @hw:			Pointer to the hardware clock structure.
- * @degrees		The clock phase shift between 0 - 359.
  * Return: 0 on success and error value on error
  */
 static int sdhci_zynqmp_sampleclk_set_phase(struct clk_hw *hw, int degrees)
-
 {
 	struct sdhci_arasan_clk_data *clk_data =
 		container_of(hw, struct sdhci_arasan_clk_data, sampleclk_hw);
@@ -723,10 +731,11 @@ static const struct clk_ops zynqmp_sampleclk_ops = {
 /**
  * sdhci_versal_sdcardclk_set_phase - Set the SD Output Clock Tap Delays
  *
+ * @hw:			Pointer to the hardware clock structure.
+ * @degrees:		The clock phase shift between 0 - 359.
+ *
  * Set the SD Output Clock Tap Delays for Output path
  *
- * @hw:			Pointer to the hardware clock structure.
- * @degrees		The clock phase shift between 0 - 359.
  * Return: 0 on success and error value on error
  */
 static int sdhci_versal_sdcardclk_set_phase(struct clk_hw *hw, int degrees)
@@ -794,10 +803,11 @@ static const struct clk_ops versal_sdcardclk_ops = {
 /**
  * sdhci_versal_sampleclk_set_phase - Set the SD Input Clock Tap Delays
  *
+ * @hw:			Pointer to the hardware clock structure.
+ * @degrees:		The clock phase shift between 0 - 359.
+ *
  * Set the SD Input Clock Tap Delays for Input path
  *
- * @hw:			Pointer to the hardware clock structure.
- * @degrees		The clock phase shift between 0 - 359.
  * Return: 0 on success and error value on error
  */
 static int sdhci_versal_sampleclk_set_phase(struct clk_hw *hw, int degrees)
@@ -913,6 +923,9 @@ static int arasan_zynqmp_execute_tuning(struct mmc_host *mmc, u32 opcode)
 /**
  * sdhci_arasan_update_clockmultiplier - Set corecfg_clockmultiplier
  *
+ * @host:		The sdhci_host
+ * @value:		The value to write
+ *
  * The corecfg_clockmultiplier is supposed to contain clock multiplier
  * value of programmable clock generator.
  *
@@ -924,8 +937,6 @@ static int arasan_zynqmp_execute_tuning(struct mmc_host *mmc, u32 opcode)
  * - The value of corecfg_clockmultiplier should sync with that of corresponding
  *   value reading from sdhci_capability_register. So this function is called
  *   once at probe time and never called again.
- *
- * @host:		The sdhci_host
  */
 static void sdhci_arasan_update_clockmultiplier(struct sdhci_host *host,
 						u32 value)
@@ -952,6 +963,8 @@ static void sdhci_arasan_update_clockmultiplier(struct sdhci_host *host,
 /**
  * sdhci_arasan_update_baseclkfreq - Set corecfg_baseclkfreq
  *
+ * @host:		The sdhci_host
+ *
  * The corecfg_baseclkfreq is supposed to contain the MHz of clk_xin.  This
  * function can be used to make that happen.
  *
@@ -963,8 +976,6 @@ static void sdhci_arasan_update_clockmultiplier(struct sdhci_host *host,
  * - It's assumed that clk_xin is not dynamic and that we use the SDHCI divider
  *   to achieve lower clock rates.  That means that this function is called once
  *   at probe time and never called again.
- *
- * @host:		The sdhci_host
  */
 static void sdhci_arasan_update_baseclkfreq(struct sdhci_host *host)
 {
@@ -1028,10 +1039,10 @@ static void arasan_dt_read_clk_phase(struct device *dev,
 /**
  * arasan_dt_parse_clk_phases - Read Clock Delay values from DT
  *
- * Called at initialization to parse the values of Clock Delays.
- *
  * @dev:		Pointer to our struct device.
  * @clk_data:		Pointer to the Clock Data structure
+ *
+ * Called at initialization to parse the values of Clock Delays.
  */
 static void arasan_dt_parse_clk_phases(struct device *dev,
 				       struct sdhci_arasan_clk_data *clk_data)
@@ -1202,14 +1213,15 @@ MODULE_DEVICE_TABLE(of, sdhci_arasan_of_match);
 /**
  * sdhci_arasan_register_sdcardclk - Register the sdcardclk for a PHY to use
  *
+ * @sdhci_arasan:	Our private data structure.
+ * @clk_xin:		Pointer to the functional clock
+ * @dev:		Pointer to our struct device.
+ *
  * Some PHY devices need to know what the actual card clock is.  In order for
  * them to find out, we'll provide a clock through the common clock framework
  * for them to query.
  *
- * @sdhci_arasan:	Our private data structure.
- * @clk_xin:		Pointer to the functional clock
- * @dev:		Pointer to our struct device.
- * Returns 0 on success and error value on error
+ * Return: 0 on success and error value on error
  */
 static int
 sdhci_arasan_register_sdcardclk(struct sdhci_arasan_data *sdhci_arasan,
@@ -1251,14 +1263,15 @@ sdhci_arasan_register_sdcardclk(struct sdhci_arasan_data *sdhci_arasan,
 /**
  * sdhci_arasan_register_sampleclk - Register the sampleclk for a PHY to use
  *
+ * @sdhci_arasan:	Our private data structure.
+ * @clk_xin:		Pointer to the functional clock
+ * @dev:		Pointer to our struct device.
+ *
  * Some PHY devices need to know what the actual card clock is.  In order for
  * them to find out, we'll provide a clock through the common clock framework
  * for them to query.
  *
- * @sdhci_arasan:	Our private data structure.
- * @clk_xin:		Pointer to the functional clock
- * @dev:		Pointer to our struct device.
- * Returns 0 on success and error value on error
+ * Return: 0 on success and error value on error
  */
 static int
 sdhci_arasan_register_sampleclk(struct sdhci_arasan_data *sdhci_arasan,
@@ -1300,10 +1313,10 @@ sdhci_arasan_register_sampleclk(struct sdhci_arasan_data *sdhci_arasan,
 /**
  * sdhci_arasan_unregister_sdclk - Undoes sdhci_arasan_register_sdclk()
  *
+ * @dev:		Pointer to our struct device.
+ *
  * Should be called any time we're exiting and sdhci_arasan_register_sdclk()
  * returned success.
- *
- * @dev:		Pointer to our struct device.
  */
 static void sdhci_arasan_unregister_sdclk(struct device *dev)
 {
@@ -1318,6 +1331,10 @@ static void sdhci_arasan_unregister_sdclk(struct device *dev)
 /**
  * sdhci_arasan_register_sdclk - Register the sdcardclk for a PHY to use
  *
+ * @sdhci_arasan:	Our private data structure.
+ * @clk_xin:		Pointer to the functional clock
+ * @dev:		Pointer to our struct device.
+ *
  * Some PHY devices need to know what the actual card clock is.  In order for
  * them to find out, we'll provide a clock through the common clock framework
  * for them to query.
@@ -1330,10 +1347,7 @@ static void sdhci_arasan_unregister_sdclk(struct device *dev)
  * to create nice clean device tree bindings and later (if needed) we can try
  * re-architecting SDHCI if we see some benefit to it.
  *
- * @sdhci_arasan:	Our private data structure.
- * @clk_xin:		Pointer to the functional clock
- * @dev:		Pointer to our struct device.
- * Returns 0 on success and error value on error
+ * Return: 0 on success and error value on error
  */
 static int sdhci_arasan_register_sdclk(struct sdhci_arasan_data *sdhci_arasan,
 				       struct clk *clk_xin,
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 3/4] mmc: sdhci-of-arasan: Modify clock operations handling

[Adrian Hunter]

On 30/03/20 8:41 am, Manish Narani wrote:
> The SDHCI clock operations are platform specific. So it better to define
> them separately for particular platform. This will prevent multiple
> if..else conditions and will make it easy for user to add their own
> clock operations handlers.
> 
> Signed-off-by: Manish Narani <manish.narani@xilinx.com>
> ---
>  drivers/mmc/host/sdhci-of-arasan.c | 208 +++++++++++++++++------------
>  1 file changed, 119 insertions(+), 89 deletions(-)

Would you mind splitting this into a patch that moves the existing
structures first, and then a second patch to make the changes.

Also, I notice there is 'struct sdhci_arasan_data' but also
'struct sdhci_arasan_of_data sdhci_arasan_data'.  This is confusing, so
perhaps a preparatory patch that renames the latter from sdhci_arasan_data
to somethine else e.g. sdhci_arasan_generic_data

Re: [PATCH v2 3/4] mmc: sdhci-of-arasan: Modify clock operations handling

[Adrian Hunter]

On 30/03/20 8:41 am, Manish Narani wrote:
> The SDHCI clock operations are platform specific. So it better to define
> them separately for particular platform. This will prevent multiple
> if..else conditions and will make it easy for user to add their own
> clock operations handlers.
> 
> Signed-off-by: Manish Narani <manish.narani@xilinx.com>
> ---
>  drivers/mmc/host/sdhci-of-arasan.c | 208 +++++++++++++++++------------
>  1 file changed, 119 insertions(+), 89 deletions(-)

Would you mind splitting this into a patch that moves the existing
structures first, and then a second patch to make the changes.

Also, I notice there is 'struct sdhci_arasan_data' but also
'struct sdhci_arasan_of_data sdhci_arasan_data'.  This is confusing, so
perhaps a preparatory patch that renames the latter from sdhci_arasan_data
to somethine else e.g. sdhci_arasan_generic_data

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 2/4] sdhci: arasan: Add support for Versal Tap Delays

[Adrian Hunter]

On 30/03/20 8:41 am, Manish Narani wrote:
> Add support to set tap delays for Xilinx Versal SD controller. The tap
> delay registers have moved to SD controller space in Versal. Make the
> changes accordingly.
> 
> Signed-off-by: Manish Narani <manish.narani@xilinx.com>

Acked-by: Adrian Hunter <adrian.hunter@intel.com>

> ---
>  drivers/mmc/host/sdhci-of-arasan.c | 175 +++++++++++++++++++++++++++++
>  1 file changed, 175 insertions(+)
> 
> diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
> index 0146d7dd315b..34403b2cac97 100644
> --- a/drivers/mmc/host/sdhci-of-arasan.c
> +++ b/drivers/mmc/host/sdhci-of-arasan.c
> @@ -28,15 +28,26 @@
>  #include "sdhci-pltfm.h"
>  
>  #define SDHCI_ARASAN_VENDOR_REGISTER	0x78
> +
> +#define SDHCI_ARASAN_ITAPDLY_REGISTER	0xF0F8
> +#define SDHCI_ARASAN_OTAPDLY_REGISTER	0xF0FC
> +
>  #define SDHCI_ARASAN_CQE_BASE_ADDR	0x200
>  #define VENDOR_ENHANCED_STROBE		BIT(0)
>  
>  #define PHY_CLK_TOO_SLOW_HZ		400000
>  
> +#define SDHCI_ITAPDLY_CHGWIN		0x200
> +#define SDHCI_ITAPDLY_ENABLE		0x100
> +#define SDHCI_OTAPDLY_ENABLE		0x40
> +
>  /* Default settings for ZynqMP Clock Phases */
>  #define ZYNQMP_ICLK_PHASE {0, 63, 63, 0, 63,  0,   0, 183, 54,  0, 0}
>  #define ZYNQMP_OCLK_PHASE {0, 72, 60, 0, 60, 72, 135, 48, 72, 135, 0}
>  
> +#define VERSAL_ICLK_PHASE {0, 132, 132, 0, 132, 0, 0, 162, 90, 0, 0}
> +#define VERSAL_OCLK_PHASE {0,  60, 48, 0, 48, 72, 90, 36, 60, 90, 0}
> +
>  /*
>   * On some SoCs the syscon area has a feature where the upper 16-bits of
>   * each 32-bit register act as a write mask for the lower 16-bits.  This allows
> @@ -566,6 +577,10 @@ static const struct of_device_id sdhci_arasan_of_match[] = {
>  		.compatible = "xlnx,zynqmp-8.9a",
>  		.data = &sdhci_arasan_zynqmp_data,
>  	},
> +	{
> +		.compatible = "xlnx,versal-8.9a",
> +		.data = &sdhci_arasan_zynqmp_data,
> +	},
>  	{ /* sentinel */ }
>  };
>  MODULE_DEVICE_TABLE(of, sdhci_arasan_of_match);
> @@ -768,6 +783,152 @@ static const struct clk_ops zynqmp_sampleclk_ops = {
>  	.set_phase = sdhci_zynqmp_sampleclk_set_phase,
>  };
>  
> +/**
> + * sdhci_versal_sdcardclk_set_phase - Set the SD Output Clock Tap Delays
> + *
> + * Set the SD Output Clock Tap Delays for Output path
> + *
> + * @hw:			Pointer to the hardware clock structure.
> + * @degrees		The clock phase shift between 0 - 359.
> + * Return: 0 on success and error value on error
> + */
> +static int sdhci_versal_sdcardclk_set_phase(struct clk_hw *hw, int degrees)
> +{
> +	struct sdhci_arasan_clk_data *clk_data =
> +		container_of(hw, struct sdhci_arasan_clk_data, sdcardclk_hw);
> +	struct sdhci_arasan_data *sdhci_arasan =
> +		container_of(clk_data, struct sdhci_arasan_data, clk_data);
> +	struct sdhci_host *host = sdhci_arasan->host;
> +	u8 tap_delay, tap_max = 0;
> +	int ret;
> +
> +	/*
> +	 * This is applicable for SDHCI_SPEC_300 and above
> +	 * Versal does not set phase for <=25MHz clock.
> +	 * If degrees is zero, no need to do anything.
> +	 */
> +	if (host->version < SDHCI_SPEC_300 ||
> +	    host->timing == MMC_TIMING_LEGACY ||
> +	    host->timing == MMC_TIMING_UHS_SDR12 || !degrees)
> +		return 0;
> +
> +	switch (host->timing) {
> +	case MMC_TIMING_MMC_HS:
> +	case MMC_TIMING_SD_HS:
> +	case MMC_TIMING_UHS_SDR25:
> +	case MMC_TIMING_UHS_DDR50:
> +	case MMC_TIMING_MMC_DDR52:
> +		/* For 50MHz clock, 30 Taps are available */
> +		tap_max = 30;
> +		break;
> +	case MMC_TIMING_UHS_SDR50:
> +		/* For 100MHz clock, 15 Taps are available */
> +		tap_max = 15;
> +		break;
> +	case MMC_TIMING_UHS_SDR104:
> +	case MMC_TIMING_MMC_HS200:
> +		/* For 200MHz clock, 8 Taps are available */
> +		tap_max = 8;
> +	default:
> +		break;
> +	}
> +
> +	tap_delay = (degrees * tap_max) / 360;
> +
> +	/* Set the Clock Phase */
> +	if (tap_delay) {
> +		u32 regval;
> +
> +		regval = sdhci_readl(host, SDHCI_ARASAN_OTAPDLY_REGISTER);
> +		regval |= SDHCI_OTAPDLY_ENABLE;
> +		sdhci_writel(host, regval, SDHCI_ARASAN_OTAPDLY_REGISTER);
> +		regval |= tap_delay;
> +		sdhci_writel(host, regval, SDHCI_ARASAN_OTAPDLY_REGISTER);
> +	}
> +
> +	return ret;
> +}
> +
> +static const struct clk_ops versal_sdcardclk_ops = {
> +	.recalc_rate = sdhci_arasan_sdcardclk_recalc_rate,
> +	.set_phase = sdhci_versal_sdcardclk_set_phase,
> +};
> +
> +/**
> + * sdhci_versal_sampleclk_set_phase - Set the SD Input Clock Tap Delays
> + *
> + * Set the SD Input Clock Tap Delays for Input path
> + *
> + * @hw:			Pointer to the hardware clock structure.
> + * @degrees		The clock phase shift between 0 - 359.
> + * Return: 0 on success and error value on error
> + */
> +static int sdhci_versal_sampleclk_set_phase(struct clk_hw *hw, int degrees)
> +{
> +	struct sdhci_arasan_clk_data *clk_data =
> +		container_of(hw, struct sdhci_arasan_clk_data, sampleclk_hw);
> +	struct sdhci_arasan_data *sdhci_arasan =
> +		container_of(clk_data, struct sdhci_arasan_data, clk_data);
> +	struct sdhci_host *host = sdhci_arasan->host;
> +	u8 tap_delay, tap_max = 0;
> +	int ret;
> +
> +	/*
> +	 * This is applicable for SDHCI_SPEC_300 and above
> +	 * Versal does not set phase for <=25MHz clock.
> +	 * If degrees is zero, no need to do anything.
> +	 */
> +	if (host->version < SDHCI_SPEC_300 ||
> +	    host->timing == MMC_TIMING_LEGACY ||
> +	    host->timing == MMC_TIMING_UHS_SDR12 || !degrees)
> +		return 0;
> +
> +	switch (host->timing) {
> +	case MMC_TIMING_MMC_HS:
> +	case MMC_TIMING_SD_HS:
> +	case MMC_TIMING_UHS_SDR25:
> +	case MMC_TIMING_UHS_DDR50:
> +	case MMC_TIMING_MMC_DDR52:
> +		/* For 50MHz clock, 120 Taps are available */
> +		tap_max = 120;
> +		break;
> +	case MMC_TIMING_UHS_SDR50:
> +		/* For 100MHz clock, 60 Taps are available */
> +		tap_max = 60;
> +		break;
> +	case MMC_TIMING_UHS_SDR104:
> +	case MMC_TIMING_MMC_HS200:
> +		/* For 200MHz clock, 30 Taps are available */
> +		tap_max = 30;
> +	default:
> +		break;
> +	}
> +
> +	tap_delay = (degrees * tap_max) / 360;
> +
> +	/* Set the Clock Phase */
> +	if (tap_delay) {
> +		u32 regval;
> +
> +		regval = sdhci_readl(host, SDHCI_ARASAN_ITAPDLY_REGISTER);
> +		regval |= SDHCI_ITAPDLY_CHGWIN;
> +		sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER);
> +		regval |= SDHCI_ITAPDLY_ENABLE;
> +		sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER);
> +		regval |= tap_delay;
> +		sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER);
> +		regval &= ~SDHCI_ITAPDLY_CHGWIN;
> +		sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER);
> +	}
> +
> +	return ret;
> +}
> +
> +static const struct clk_ops versal_sampleclk_ops = {
> +	.recalc_rate = sdhci_arasan_sampleclk_recalc_rate,
> +	.set_phase = sdhci_versal_sampleclk_set_phase,
> +};
> +
>  static void arasan_zynqmp_dll_reset(struct sdhci_host *host, u32 deviceid)
>  {
>  	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> @@ -965,6 +1126,16 @@ static void arasan_dt_parse_clk_phases(struct device *dev,
>  		}
>  	}
>  
> +	if (of_device_is_compatible(dev->of_node, "xlnx,versal-8.9a")) {
> +		iclk_phase = (int [MMC_TIMING_MMC_HS400 + 1]) VERSAL_ICLK_PHASE;
> +		oclk_phase = (int [MMC_TIMING_MMC_HS400 + 1]) VERSAL_OCLK_PHASE;
> +
> +		for (i = 0; i <= MMC_TIMING_MMC_HS400; i++) {
> +			clk_data->clk_phase_in[i] = iclk_phase[i];
> +			clk_data->clk_phase_out[i] = oclk_phase[i];
> +		}
> +	}
> +
>  	arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_LEGACY,
>  				 "clk-phase-legacy");
>  	arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_MMC_HS,
> @@ -1025,6 +1196,8 @@ sdhci_arasan_register_sdcardclk(struct sdhci_arasan_data *sdhci_arasan,
>  	sdcardclk_init.flags = CLK_GET_RATE_NOCACHE;
>  	if (of_device_is_compatible(np, "xlnx,zynqmp-8.9a"))
>  		sdcardclk_init.ops = &zynqmp_sdcardclk_ops;
> +	else if (of_device_is_compatible(np, "xlnx,versal-8.9a"))
> +		sdcardclk_init.ops = &versal_sdcardclk_ops;
>  	else
>  		sdcardclk_init.ops = &arasan_sdcardclk_ops;
>  
> @@ -1077,6 +1250,8 @@ sdhci_arasan_register_sampleclk(struct sdhci_arasan_data *sdhci_arasan,
>  	sampleclk_init.flags = CLK_GET_RATE_NOCACHE;
>  	if (of_device_is_compatible(np, "xlnx,zynqmp-8.9a"))
>  		sampleclk_init.ops = &zynqmp_sampleclk_ops;
> +	else if (of_device_is_compatible(np, "xlnx,versal-8.9a"))
> +		sampleclk_init.ops = &versal_sampleclk_ops;
>  	else
>  		sampleclk_init.ops = &arasan_sampleclk_ops;
>  
> 

Re: [PATCH v2 2/4] sdhci: arasan: Add support for Versal Tap Delays

[Adrian Hunter]

On 30/03/20 8:41 am, Manish Narani wrote:
> Add support to set tap delays for Xilinx Versal SD controller. The tap
> delay registers have moved to SD controller space in Versal. Make the
> changes accordingly.
> 
> Signed-off-by: Manish Narani <manish.narani@xilinx.com>

Acked-by: Adrian Hunter <adrian.hunter@intel.com>

> ---
>  drivers/mmc/host/sdhci-of-arasan.c | 175 +++++++++++++++++++++++++++++
>  1 file changed, 175 insertions(+)
> 
> diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
> index 0146d7dd315b..34403b2cac97 100644
> --- a/drivers/mmc/host/sdhci-of-arasan.c
> +++ b/drivers/mmc/host/sdhci-of-arasan.c
> @@ -28,15 +28,26 @@
>  #include "sdhci-pltfm.h"
>  
>  #define SDHCI_ARASAN_VENDOR_REGISTER	0x78
> +
> +#define SDHCI_ARASAN_ITAPDLY_REGISTER	0xF0F8
> +#define SDHCI_ARASAN_OTAPDLY_REGISTER	0xF0FC
> +
>  #define SDHCI_ARASAN_CQE_BASE_ADDR	0x200
>  #define VENDOR_ENHANCED_STROBE		BIT(0)
>  
>  #define PHY_CLK_TOO_SLOW_HZ		400000
>  
> +#define SDHCI_ITAPDLY_CHGWIN		0x200
> +#define SDHCI_ITAPDLY_ENABLE		0x100
> +#define SDHCI_OTAPDLY_ENABLE		0x40
> +
>  /* Default settings for ZynqMP Clock Phases */
>  #define ZYNQMP_ICLK_PHASE {0, 63, 63, 0, 63,  0,   0, 183, 54,  0, 0}
>  #define ZYNQMP_OCLK_PHASE {0, 72, 60, 0, 60, 72, 135, 48, 72, 135, 0}
>  
> +#define VERSAL_ICLK_PHASE {0, 132, 132, 0, 132, 0, 0, 162, 90, 0, 0}
> +#define VERSAL_OCLK_PHASE {0,  60, 48, 0, 48, 72, 90, 36, 60, 90, 0}
> +
>  /*
>   * On some SoCs the syscon area has a feature where the upper 16-bits of
>   * each 32-bit register act as a write mask for the lower 16-bits.  This allows
> @@ -566,6 +577,10 @@ static const struct of_device_id sdhci_arasan_of_match[] = {
>  		.compatible = "xlnx,zynqmp-8.9a",
>  		.data = &sdhci_arasan_zynqmp_data,
>  	},
> +	{
> +		.compatible = "xlnx,versal-8.9a",
> +		.data = &sdhci_arasan_zynqmp_data,
> +	},
>  	{ /* sentinel */ }
>  };
>  MODULE_DEVICE_TABLE(of, sdhci_arasan_of_match);
> @@ -768,6 +783,152 @@ static const struct clk_ops zynqmp_sampleclk_ops = {
>  	.set_phase = sdhci_zynqmp_sampleclk_set_phase,
>  };
>  
> +/**
> + * sdhci_versal_sdcardclk_set_phase - Set the SD Output Clock Tap Delays
> + *
> + * Set the SD Output Clock Tap Delays for Output path
> + *
> + * @hw:			Pointer to the hardware clock structure.
> + * @degrees		The clock phase shift between 0 - 359.
> + * Return: 0 on success and error value on error
> + */
> +static int sdhci_versal_sdcardclk_set_phase(struct clk_hw *hw, int degrees)
> +{
> +	struct sdhci_arasan_clk_data *clk_data =
> +		container_of(hw, struct sdhci_arasan_clk_data, sdcardclk_hw);
> +	struct sdhci_arasan_data *sdhci_arasan =
> +		container_of(clk_data, struct sdhci_arasan_data, clk_data);
> +	struct sdhci_host *host = sdhci_arasan->host;
> +	u8 tap_delay, tap_max = 0;
> +	int ret;
> +
> +	/*
> +	 * This is applicable for SDHCI_SPEC_300 and above
> +	 * Versal does not set phase for <=25MHz clock.
> +	 * If degrees is zero, no need to do anything.
> +	 */
> +	if (host->version < SDHCI_SPEC_300 ||
> +	    host->timing == MMC_TIMING_LEGACY ||
> +	    host->timing == MMC_TIMING_UHS_SDR12 || !degrees)
> +		return 0;
> +
> +	switch (host->timing) {
> +	case MMC_TIMING_MMC_HS:
> +	case MMC_TIMING_SD_HS:
> +	case MMC_TIMING_UHS_SDR25:
> +	case MMC_TIMING_UHS_DDR50:
> +	case MMC_TIMING_MMC_DDR52:
> +		/* For 50MHz clock, 30 Taps are available */
> +		tap_max = 30;
> +		break;
> +	case MMC_TIMING_UHS_SDR50:
> +		/* For 100MHz clock, 15 Taps are available */
> +		tap_max = 15;
> +		break;
> +	case MMC_TIMING_UHS_SDR104:
> +	case MMC_TIMING_MMC_HS200:
> +		/* For 200MHz clock, 8 Taps are available */
> +		tap_max = 8;
> +	default:
> +		break;
> +	}
> +
> +	tap_delay = (degrees * tap_max) / 360;
> +
> +	/* Set the Clock Phase */
> +	if (tap_delay) {
> +		u32 regval;
> +
> +		regval = sdhci_readl(host, SDHCI_ARASAN_OTAPDLY_REGISTER);
> +		regval |= SDHCI_OTAPDLY_ENABLE;
> +		sdhci_writel(host, regval, SDHCI_ARASAN_OTAPDLY_REGISTER);
> +		regval |= tap_delay;
> +		sdhci_writel(host, regval, SDHCI_ARASAN_OTAPDLY_REGISTER);
> +	}
> +
> +	return ret;
> +}
> +
> +static const struct clk_ops versal_sdcardclk_ops = {
> +	.recalc_rate = sdhci_arasan_sdcardclk_recalc_rate,
> +	.set_phase = sdhci_versal_sdcardclk_set_phase,
> +};
> +
> +/**
> + * sdhci_versal_sampleclk_set_phase - Set the SD Input Clock Tap Delays
> + *
> + * Set the SD Input Clock Tap Delays for Input path
> + *
> + * @hw:			Pointer to the hardware clock structure.
> + * @degrees		The clock phase shift between 0 - 359.
> + * Return: 0 on success and error value on error
> + */
> +static int sdhci_versal_sampleclk_set_phase(struct clk_hw *hw, int degrees)
> +{
> +	struct sdhci_arasan_clk_data *clk_data =
> +		container_of(hw, struct sdhci_arasan_clk_data, sampleclk_hw);
> +	struct sdhci_arasan_data *sdhci_arasan =
> +		container_of(clk_data, struct sdhci_arasan_data, clk_data);
> +	struct sdhci_host *host = sdhci_arasan->host;
> +	u8 tap_delay, tap_max = 0;
> +	int ret;
> +
> +	/*
> +	 * This is applicable for SDHCI_SPEC_300 and above
> +	 * Versal does not set phase for <=25MHz clock.
> +	 * If degrees is zero, no need to do anything.
> +	 */
> +	if (host->version < SDHCI_SPEC_300 ||
> +	    host->timing == MMC_TIMING_LEGACY ||
> +	    host->timing == MMC_TIMING_UHS_SDR12 || !degrees)
> +		return 0;
> +
> +	switch (host->timing) {
> +	case MMC_TIMING_MMC_HS:
> +	case MMC_TIMING_SD_HS:
> +	case MMC_TIMING_UHS_SDR25:
> +	case MMC_TIMING_UHS_DDR50:
> +	case MMC_TIMING_MMC_DDR52:
> +		/* For 50MHz clock, 120 Taps are available */
> +		tap_max = 120;
> +		break;
> +	case MMC_TIMING_UHS_SDR50:
> +		/* For 100MHz clock, 60 Taps are available */
> +		tap_max = 60;
> +		break;
> +	case MMC_TIMING_UHS_SDR104:
> +	case MMC_TIMING_MMC_HS200:
> +		/* For 200MHz clock, 30 Taps are available */
> +		tap_max = 30;
> +	default:
> +		break;
> +	}
> +
> +	tap_delay = (degrees * tap_max) / 360;
> +
> +	/* Set the Clock Phase */
> +	if (tap_delay) {
> +		u32 regval;
> +
> +		regval = sdhci_readl(host, SDHCI_ARASAN_ITAPDLY_REGISTER);
> +		regval |= SDHCI_ITAPDLY_CHGWIN;
> +		sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER);
> +		regval |= SDHCI_ITAPDLY_ENABLE;
> +		sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER);
> +		regval |= tap_delay;
> +		sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER);
> +		regval &= ~SDHCI_ITAPDLY_CHGWIN;
> +		sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER);
> +	}
> +
> +	return ret;
> +}
> +
> +static const struct clk_ops versal_sampleclk_ops = {
> +	.recalc_rate = sdhci_arasan_sampleclk_recalc_rate,
> +	.set_phase = sdhci_versal_sampleclk_set_phase,
> +};
> +
>  static void arasan_zynqmp_dll_reset(struct sdhci_host *host, u32 deviceid)
>  {
>  	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> @@ -965,6 +1126,16 @@ static void arasan_dt_parse_clk_phases(struct device *dev,
>  		}
>  	}
>  
> +	if (of_device_is_compatible(dev->of_node, "xlnx,versal-8.9a")) {
> +		iclk_phase = (int [MMC_TIMING_MMC_HS400 + 1]) VERSAL_ICLK_PHASE;
> +		oclk_phase = (int [MMC_TIMING_MMC_HS400 + 1]) VERSAL_OCLK_PHASE;
> +
> +		for (i = 0; i <= MMC_TIMING_MMC_HS400; i++) {
> +			clk_data->clk_phase_in[i] = iclk_phase[i];
> +			clk_data->clk_phase_out[i] = oclk_phase[i];
> +		}
> +	}
> +
>  	arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_LEGACY,
>  				 "clk-phase-legacy");
>  	arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_MMC_HS,
> @@ -1025,6 +1196,8 @@ sdhci_arasan_register_sdcardclk(struct sdhci_arasan_data *sdhci_arasan,
>  	sdcardclk_init.flags = CLK_GET_RATE_NOCACHE;
>  	if (of_device_is_compatible(np, "xlnx,zynqmp-8.9a"))
>  		sdcardclk_init.ops = &zynqmp_sdcardclk_ops;
> +	else if (of_device_is_compatible(np, "xlnx,versal-8.9a"))
> +		sdcardclk_init.ops = &versal_sdcardclk_ops;
>  	else
>  		sdcardclk_init.ops = &arasan_sdcardclk_ops;
>  
> @@ -1077,6 +1250,8 @@ sdhci_arasan_register_sampleclk(struct sdhci_arasan_data *sdhci_arasan,
>  	sampleclk_init.flags = CLK_GET_RATE_NOCACHE;
>  	if (of_device_is_compatible(np, "xlnx,zynqmp-8.9a"))
>  		sampleclk_init.ops = &zynqmp_sampleclk_ops;
> +	else if (of_device_is_compatible(np, "xlnx,versal-8.9a"))
> +		sampleclk_init.ops = &versal_sampleclk_ops;
>  	else
>  		sampleclk_init.ops = &arasan_sampleclk_ops;
>  
> 


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

RE: [PATCH v2 3/4] mmc: sdhci-of-arasan: Modify clock operations handling

[Manish Narani]

Hi Adrian,

Thanks for the review.

> -----Original Message-----
> From: Adrian Hunter <adrian.hunter@intel.com>
> Sent: Thursday, April 2, 2020 3:40 PM
> To: Manish Narani <MNARANI@xilinx.com>; ulf.hansson@linaro.org;
> robh+dt@kernel.org; mark.rutland@arm.com; Michal Simek
> <michals@xilinx.com>
> Cc: linux-mmc@vger.kernel.org; devicetree@vger.kernel.org; linux-
> kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org; git
> <git@xilinx.com>
> Subject: Re: [PATCH v2 3/4] mmc: sdhci-of-arasan: Modify clock operations
> handling
> 
> On 30/03/20 8:41 am, Manish Narani wrote:
> > The SDHCI clock operations are platform specific. So it better to define
> > them separately for particular platform. This will prevent multiple
> > if..else conditions and will make it easy for user to add their own
> > clock operations handlers.
> >
> > Signed-off-by: Manish Narani <manish.narani@xilinx.com>
> > ---
> >  drivers/mmc/host/sdhci-of-arasan.c | 208 +++++++++++++++++------------
> >  1 file changed, 119 insertions(+), 89 deletions(-)
> 
> Would you mind splitting this into a patch that moves the existing
> structures first, and then a second patch to make the changes.

Noted. Will do that in next patch series.

> 
> Also, I notice there is 'struct sdhci_arasan_data' but also
> 'struct sdhci_arasan_of_data sdhci_arasan_data'.  This is confusing, so
> perhaps a preparatory patch that renames the latter from sdhci_arasan_data
> to somethine else e.g. sdhci_arasan_generic_data

Okay. I will create a separate patch for renaming the sdhci_arasan_data.

Thanks,
Manish

RE: [PATCH v2 3/4] mmc: sdhci-of-arasan: Modify clock operations handling

[Manish Narani]

Hi Adrian,

Thanks for the review.

> -----Original Message-----
> From: Adrian Hunter <adrian.hunter@intel.com>
> Sent: Thursday, April 2, 2020 3:40 PM
> To: Manish Narani <MNARANI@xilinx.com>; ulf.hansson@linaro.org;
> robh+dt@kernel.org; mark.rutland@arm.com; Michal Simek
> <michals@xilinx.com>
> Cc: linux-mmc@vger.kernel.org; devicetree@vger.kernel.org; linux-
> kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org; git
> <git@xilinx.com>
> Subject: Re: [PATCH v2 3/4] mmc: sdhci-of-arasan: Modify clock operations
> handling
> 
> On 30/03/20 8:41 am, Manish Narani wrote:
> > The SDHCI clock operations are platform specific. So it better to define
> > them separately for particular platform. This will prevent multiple
> > if..else conditions and will make it easy for user to add their own
> > clock operations handlers.
> >
> > Signed-off-by: Manish Narani <manish.narani@xilinx.com>
> > ---
> >  drivers/mmc/host/sdhci-of-arasan.c | 208 +++++++++++++++++------------
> >  1 file changed, 119 insertions(+), 89 deletions(-)
> 
> Would you mind splitting this into a patch that moves the existing
> structures first, and then a second patch to make the changes.

Noted. Will do that in next patch series.

> 
> Also, I notice there is 'struct sdhci_arasan_data' but also
> 'struct sdhci_arasan_of_data sdhci_arasan_data'.  This is confusing, so
> perhaps a preparatory patch that renames the latter from sdhci_arasan_data
> to somethine else e.g. sdhci_arasan_generic_data

Okay. I will create a separate patch for renaming the sdhci_arasan_data.

Thanks,
Manish

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel