* [PATCH] ARM: dts: gw552x: add USB OTG support
@ 2020-04-24 17:10 ` Tim Harvey
0 siblings, 0 replies; 10+ messages in thread
From: Tim Harvey @ 2020-04-24 17:10 UTC (permalink / raw)
To: Shawn Guo, Sascha Hauer, linux-arm-kernel, devicetree, linux-kernel
Cc: Tim Harvey
The GW552x-B board revision adds USB OTG support.
Enable the device-tree node and configure the OTG_ID pin.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
arch/arm/boot/dts/imx6qdl-gw552x.dtsi | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
index dc646b7..133a1e3 100644
--- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
@@ -12,8 +12,6 @@
led1 = &led1;
led2 = &led2;
nand = &gpmi;
- usb0 = &usbh1;
- usb1 = &usbotg;
};
chosen {
@@ -258,6 +256,14 @@
status = "okay";
};
+&usbotg {
+ vbus-supply = <®_5p0v>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ disable-over-current;
+ status = "okay";
+};
+
&wdog1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdog>;
@@ -359,6 +365,12 @@
>;
};
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x13059
+ >;
+ };
+
pinctrl_wdog: wdoggrp {
fsl,pins = <
MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
--
2.7.4
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH] ARM: dts: gw552x: add USB OTG support
@ 2020-04-24 17:10 ` Tim Harvey
0 siblings, 0 replies; 10+ messages in thread
From: Tim Harvey @ 2020-04-24 17:10 UTC (permalink / raw)
To: Shawn Guo, Sascha Hauer, linux-arm-kernel, devicetree, linux-kernel
Cc: Tim Harvey
The GW552x-B board revision adds USB OTG support.
Enable the device-tree node and configure the OTG_ID pin.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
arch/arm/boot/dts/imx6qdl-gw552x.dtsi | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
index dc646b7..133a1e3 100644
--- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
@@ -12,8 +12,6 @@
led1 = &led1;
led2 = &led2;
nand = &gpmi;
- usb0 = &usbh1;
- usb1 = &usbotg;
};
chosen {
@@ -258,6 +256,14 @@
status = "okay";
};
+&usbotg {
+ vbus-supply = <®_5p0v>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ disable-over-current;
+ status = "okay";
+};
+
&wdog1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdog>;
@@ -359,6 +365,12 @@
>;
};
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x13059
+ >;
+ };
+
pinctrl_wdog: wdoggrp {
fsl,pins = <
MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH] ARM: dts: gw552x: add USB OTG support
2020-04-24 17:10 ` Tim Harvey
@ 2020-04-29 3:37 ` Shawn Guo
-1 siblings, 0 replies; 10+ messages in thread
From: Shawn Guo @ 2020-04-29 3:37 UTC (permalink / raw)
To: Tim Harvey; +Cc: Sascha Hauer, linux-arm-kernel, devicetree, linux-kernel
On Fri, Apr 24, 2020 at 10:10:15AM -0700, Tim Harvey wrote:
> The GW552x-B board revision adds USB OTG support.
>
> Enable the device-tree node and configure the OTG_ID pin.
>
> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
> ---
> arch/arm/boot/dts/imx6qdl-gw552x.dtsi | 16 ++++++++++++++--
> 1 file changed, 14 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
> index dc646b7..133a1e3 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
> @@ -12,8 +12,6 @@
> led1 = &led1;
> led2 = &led2;
> nand = &gpmi;
> - usb0 = &usbh1;
> - usb1 = &usbotg;
Have some comments about this change in the commit log?
Shawn
> };
>
> chosen {
> @@ -258,6 +256,14 @@
> status = "okay";
> };
>
> +&usbotg {
> + vbus-supply = <®_5p0v>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usbotg>;
> + disable-over-current;
> + status = "okay";
> +};
> +
> &wdog1 {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_wdog>;
> @@ -359,6 +365,12 @@
> >;
> };
>
> + pinctrl_usbotg: usbotggrp {
> + fsl,pins = <
> + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x13059
> + >;
> + };
> +
> pinctrl_wdog: wdoggrp {
> fsl,pins = <
> MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
> --
> 2.7.4
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] ARM: dts: gw552x: add USB OTG support
@ 2020-04-29 3:37 ` Shawn Guo
0 siblings, 0 replies; 10+ messages in thread
From: Shawn Guo @ 2020-04-29 3:37 UTC (permalink / raw)
To: Tim Harvey; +Cc: devicetree, Sascha Hauer, linux-kernel, linux-arm-kernel
On Fri, Apr 24, 2020 at 10:10:15AM -0700, Tim Harvey wrote:
> The GW552x-B board revision adds USB OTG support.
>
> Enable the device-tree node and configure the OTG_ID pin.
>
> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
> ---
> arch/arm/boot/dts/imx6qdl-gw552x.dtsi | 16 ++++++++++++++--
> 1 file changed, 14 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
> index dc646b7..133a1e3 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
> @@ -12,8 +12,6 @@
> led1 = &led1;
> led2 = &led2;
> nand = &gpmi;
> - usb0 = &usbh1;
> - usb1 = &usbotg;
Have some comments about this change in the commit log?
Shawn
> };
>
> chosen {
> @@ -258,6 +256,14 @@
> status = "okay";
> };
>
> +&usbotg {
> + vbus-supply = <®_5p0v>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usbotg>;
> + disable-over-current;
> + status = "okay";
> +};
> +
> &wdog1 {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_wdog>;
> @@ -359,6 +365,12 @@
> >;
> };
>
> + pinctrl_usbotg: usbotggrp {
> + fsl,pins = <
> + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x13059
> + >;
> + };
> +
> pinctrl_wdog: wdoggrp {
> fsl,pins = <
> MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
> --
> 2.7.4
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] ARM: dts: gw552x: add USB OTG support
2020-04-29 3:37 ` Shawn Guo
@ 2020-04-29 15:12 ` Tim Harvey
-1 siblings, 0 replies; 10+ messages in thread
From: Tim Harvey @ 2020-04-29 15:12 UTC (permalink / raw)
To: Shawn Guo
Cc: Sascha Hauer, Linux ARM Mailing List, Device Tree Mailing List,
open list
On Tue, Apr 28, 2020 at 8:37 PM Shawn Guo <shawnguo@kernel.org> wrote:
>
> On Fri, Apr 24, 2020 at 10:10:15AM -0700, Tim Harvey wrote:
> > The GW552x-B board revision adds USB OTG support.
> >
> > Enable the device-tree node and configure the OTG_ID pin.
> >
> > Signed-off-by: Tim Harvey <tharvey@gateworks.com>
> > ---
> > arch/arm/boot/dts/imx6qdl-gw552x.dtsi | 16 ++++++++++++++--
> > 1 file changed, 14 insertions(+), 2 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
> > index dc646b7..133a1e3 100644
> > --- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
> > +++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
> > @@ -12,8 +12,6 @@
> > led1 = &led1;
> > led2 = &led2;
> > nand = &gpmi;
> > - usb0 = &usbh1;
> > - usb1 = &usbotg;
>
> Have some comments about this change in the commit log?
>
Shawn,
I shouldn't have removed those... will submit a v2. Thank you for catching this!
Tim
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] ARM: dts: gw552x: add USB OTG support
@ 2020-04-29 15:12 ` Tim Harvey
0 siblings, 0 replies; 10+ messages in thread
From: Tim Harvey @ 2020-04-29 15:12 UTC (permalink / raw)
To: Shawn Guo
Cc: Device Tree Mailing List, Sascha Hauer, open list,
Linux ARM Mailing List
On Tue, Apr 28, 2020 at 8:37 PM Shawn Guo <shawnguo@kernel.org> wrote:
>
> On Fri, Apr 24, 2020 at 10:10:15AM -0700, Tim Harvey wrote:
> > The GW552x-B board revision adds USB OTG support.
> >
> > Enable the device-tree node and configure the OTG_ID pin.
> >
> > Signed-off-by: Tim Harvey <tharvey@gateworks.com>
> > ---
> > arch/arm/boot/dts/imx6qdl-gw552x.dtsi | 16 ++++++++++++++--
> > 1 file changed, 14 insertions(+), 2 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
> > index dc646b7..133a1e3 100644
> > --- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
> > +++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
> > @@ -12,8 +12,6 @@
> > led1 = &led1;
> > led2 = &led2;
> > nand = &gpmi;
> > - usb0 = &usbh1;
> > - usb1 = &usbotg;
>
> Have some comments about this change in the commit log?
>
Shawn,
I shouldn't have removed those... will submit a v2. Thank you for catching this!
Tim
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v2] ARM: dts: gw552x: add USB OTG support
2020-04-24 17:10 ` Tim Harvey
@ 2020-04-29 15:22 ` Tim Harvey
-1 siblings, 0 replies; 10+ messages in thread
From: Tim Harvey @ 2020-04-29 15:22 UTC (permalink / raw)
To: Shawn Guo, Sascha Hauer, linux-arm-kernel, devicetree, linux-kernel
Cc: Tim Harvey
The GW552x-B board revision adds USB OTG support.
Enable the device-tree node and configure the OTG_ID pin.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
arch/arm/boot/dts/imx6qdl-gw552x.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
index dc646b7..bb35971 100644
--- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
@@ -258,6 +258,14 @@
status = "okay";
};
+&usbotg {
+ vbus-supply = <®_5p0v>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ disable-over-current;
+ status = "okay";
+};
+
&wdog1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdog>;
@@ -359,6 +367,12 @@
>;
};
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x13059
+ >;
+ };
+
pinctrl_wdog: wdoggrp {
fsl,pins = <
MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
--
2.7.4
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v2] ARM: dts: gw552x: add USB OTG support
@ 2020-04-29 15:22 ` Tim Harvey
0 siblings, 0 replies; 10+ messages in thread
From: Tim Harvey @ 2020-04-29 15:22 UTC (permalink / raw)
To: Shawn Guo, Sascha Hauer, linux-arm-kernel, devicetree, linux-kernel
Cc: Tim Harvey
The GW552x-B board revision adds USB OTG support.
Enable the device-tree node and configure the OTG_ID pin.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
arch/arm/boot/dts/imx6qdl-gw552x.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
index dc646b7..bb35971 100644
--- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
@@ -258,6 +258,14 @@
status = "okay";
};
+&usbotg {
+ vbus-supply = <®_5p0v>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ disable-over-current;
+ status = "okay";
+};
+
&wdog1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdog>;
@@ -359,6 +367,12 @@
>;
};
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x13059
+ >;
+ };
+
pinctrl_wdog: wdoggrp {
fsl,pins = <
MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH v2] ARM: dts: gw552x: add USB OTG support
2020-04-29 15:22 ` Tim Harvey
@ 2020-05-13 8:10 ` Shawn Guo
-1 siblings, 0 replies; 10+ messages in thread
From: Shawn Guo @ 2020-05-13 8:10 UTC (permalink / raw)
To: Tim Harvey; +Cc: Sascha Hauer, linux-arm-kernel, devicetree, linux-kernel
On Wed, Apr 29, 2020 at 08:22:35AM -0700, Tim Harvey wrote:
> The GW552x-B board revision adds USB OTG support.
>
> Enable the device-tree node and configure the OTG_ID pin.
>
> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Changed prefix to 'ARM: dts: imx6qdl-gw552x: ' and applied patch.
Shawn
> ---
> arch/arm/boot/dts/imx6qdl-gw552x.dtsi | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
> index dc646b7..bb35971 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
> @@ -258,6 +258,14 @@
> status = "okay";
> };
>
> +&usbotg {
> + vbus-supply = <®_5p0v>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usbotg>;
> + disable-over-current;
> + status = "okay";
> +};
> +
> &wdog1 {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_wdog>;
> @@ -359,6 +367,12 @@
> >;
> };
>
> + pinctrl_usbotg: usbotggrp {
> + fsl,pins = <
> + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x13059
> + >;
> + };
> +
> pinctrl_wdog: wdoggrp {
> fsl,pins = <
> MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
> --
> 2.7.4
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v2] ARM: dts: gw552x: add USB OTG support
@ 2020-05-13 8:10 ` Shawn Guo
0 siblings, 0 replies; 10+ messages in thread
From: Shawn Guo @ 2020-05-13 8:10 UTC (permalink / raw)
To: Tim Harvey; +Cc: devicetree, Sascha Hauer, linux-kernel, linux-arm-kernel
On Wed, Apr 29, 2020 at 08:22:35AM -0700, Tim Harvey wrote:
> The GW552x-B board revision adds USB OTG support.
>
> Enable the device-tree node and configure the OTG_ID pin.
>
> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Changed prefix to 'ARM: dts: imx6qdl-gw552x: ' and applied patch.
Shawn
> ---
> arch/arm/boot/dts/imx6qdl-gw552x.dtsi | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
> index dc646b7..bb35971 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
> @@ -258,6 +258,14 @@
> status = "okay";
> };
>
> +&usbotg {
> + vbus-supply = <®_5p0v>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usbotg>;
> + disable-over-current;
> + status = "okay";
> +};
> +
> &wdog1 {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_wdog>;
> @@ -359,6 +367,12 @@
> >;
> };
>
> + pinctrl_usbotg: usbotggrp {
> + fsl,pins = <
> + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x13059
> + >;
> + };
> +
> pinctrl_wdog: wdoggrp {
> fsl,pins = <
> MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
> --
> 2.7.4
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2020-05-13 8:11 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-04-24 17:10 [PATCH] ARM: dts: gw552x: add USB OTG support Tim Harvey
2020-04-24 17:10 ` Tim Harvey
2020-04-29 3:37 ` Shawn Guo
2020-04-29 3:37 ` Shawn Guo
2020-04-29 15:12 ` Tim Harvey
2020-04-29 15:12 ` Tim Harvey
2020-04-29 15:22 ` [PATCH v2] " Tim Harvey
2020-04-29 15:22 ` Tim Harvey
2020-05-13 8:10 ` Shawn Guo
2020-05-13 8:10 ` Shawn Guo
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.