From: Ben Levinsky <ben.levinsky@xilinx.com> To: ohad@wizery.com, bjorn.andersson@linaro.org, michal.simek@xilinx.com, jollys@xilinx.com, rajan.vaja@xilinx.com, robh+dt@kernel.org, mark.rutland@arm.com Cc: linux-remoteproc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Jason Wu <j.wu@xilinx.com>, Wendy Liang <jliang@xilinx.com> Subject: [PATCH v4 4/5] dt-bindings: remoteproc: Add documentation for ZynqMP R5 rproc bindings Date: Fri, 24 Apr 2020 10:36:09 -0700 [thread overview] Message-ID: <1587749770-15082-5-git-send-email-ben.levinsky@xilinx.com> (raw) In-Reply-To: <1587749770-15082-1-git-send-email-ben.levinsky@xilinx.com> Add binding for ZynqMP R5 OpenAMP. Represent the RPU domain resources in one device node. Each RPU processor is a subnode of the top RPU domain node. Signed-off-by: Ben Levinsky <ben.levinsky@xilinx.com> Signed-off-by: Jason Wu <j.wu@xilinx.com> Signed-off-by: Wendy Liang <jliang@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> --- Changes since v2: - update zynqmp_r5 yaml parsing to not raise warnings for extra information in children of R5 node. The warning "node has a unit name, but no reg or ranges property" will still be raised though as this particular node is needed to describe the '#address-cells' and '#size-cells' information. Changes since 3: - remove warning '/example-0/rpu@ff9a0000/r5@0: node has a unit name, but no reg or ranges property' by adding reg to r5 node. --- .../remoteproc/xilinx,zynqmp-r5-remoteproc.yaml | 127 +++++++++++++++++++++ 1 file changed, 127 insertions(+) create mode 100644 Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.yaml diff --git a/Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.yaml b/Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.yaml new file mode 100644 index 0000000..41520b6 --- /dev/null +++ b/Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.yaml @@ -0,0 +1,127 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/remoteproc/xilinx,zynqmp-r5-remoteproc.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Xilinx R5 remote processor controller bindings + +description: + This document defines the binding for the remoteproc component that loads and + boots firmwares on the Xilinx Zynqmp and Versal family chipset. + +maintainers: + - Ed Mooring <ed.mooring@xilinx.com> + - Ben Levinsky <ben.levinsky@xilinx.com> + +properties: + compatible: + const: "xlnx,zynqmp-r5-remoteproc-1.0" + + core_conf: + description: + R5 core configuration (valid string - split or lock-step) + maxItems: 1 + + interrupts: + description: + Interrupt mapping for remoteproc IPI. It is required if the + user uses the remoteproc driver with the RPMsg kernel driver. + maxItems: 6 + + memory-region: + maxItems: 4 + minItems: 4 + pnode-id: + maxItems: 1 + mboxes: + maxItems: 2 + mbox-names: + maxItems: 2 + + r5@0: + type: object + required: + - '#address-cells' + - '#size-cells' + - pnode-id +examples: + - | + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + rpu0vdev0vring0: rpu0vdev0vring0@3ed40000 { + no-map; + reg = <0x3ed40000 0x4000>; + }; + rpu0vdev0vring1: rpu0vdev0vring1@3ed44000 { + no-map; + reg = <0x3ed44000 0x4000>; + }; + rpu0vdev0buffer: rpu0vdev0buffer@3ed48000 { + no-map; + reg = <0x3ed48000 0x100000>; + }; + rproc_0_reserved: rproc@3ed000000 { + no-map; + reg = <0x3ed00000 0x40000>; + }; + }; + rpu: rpu@ff9a0000 { + compatible = "xlnx,zynqmp-r5-remoteproc-1.0"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + core_conf = "split"; + reg = <0xFF9A0000 0x10000>; + r5_0: r5@0 { + ranges; + #address-cells = <1>; + #size-cells = <1>; + reg = <0xFF9A0100 0x1000>; + memory-region = <&rproc_0_reserved>, <&rpu0vdev0buffer>, <&rpu0vdev0vring0>, <&rpu0vdev0vring1>; + pnode-id = <0x7>; + mboxes = <&ipi_mailbox_rpu0 0>, <&ipi_mailbox_rpu0 1>; + mbox-names = "tx", "rx"; + tcm_0_a: tcm_0@0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xFFE00000 0x10000>; + pnode-id = <0xf>; + }; + tcm_0_b: tcm_0@1 { + #address-cells = <2>; + #size-cells = <2>; + reg = <0xFFE20000 0x10000>; + pnode-id = <0x10>; + }; + }; + }; + + + zynqmp_ipi1 { + compatible = "xlnx,zynqmp-ipi-mailbox"; + interrupt-parent = <&gic>; + interrupts = <0 29 4>; + xlnx,ipi-id = <7>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* APU<->RPU0 IPI mailbox controller */ + ipi_mailbox_rpu0: mailbox@ff90000 { + reg = <0xff990600 0x20>, + <0xff990620 0x20>, + <0xff9900c0 0x20>, + <0xff9900e0 0x20>; + reg-names = "local_request_region", + "local_response_region", + "remote_request_region", + "remote_response_region"; + #mbox-cells = <1>; + xlnx,ipi-id = <1>; + }; + }; + +... -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Ben Levinsky <ben.levinsky@xilinx.com> To: ohad@wizery.com, bjorn.andersson@linaro.org, michal.simek@xilinx.com, jollys@xilinx.com, rajan.vaja@xilinx.com, robh+dt@kernel.org, mark.rutland@arm.com Cc: devicetree@vger.kernel.org, linux-remoteproc@vger.kernel.org, linux-kernel@vger.kernel.org, Wendy Liang <jliang@xilinx.com>, Jason Wu <j.wu@xilinx.com>, linux-arm-kernel@lists.infradead.org Subject: [PATCH v4 4/5] dt-bindings: remoteproc: Add documentation for ZynqMP R5 rproc bindings Date: Fri, 24 Apr 2020 10:36:09 -0700 [thread overview] Message-ID: <1587749770-15082-5-git-send-email-ben.levinsky@xilinx.com> (raw) In-Reply-To: <1587749770-15082-1-git-send-email-ben.levinsky@xilinx.com> Add binding for ZynqMP R5 OpenAMP. Represent the RPU domain resources in one device node. Each RPU processor is a subnode of the top RPU domain node. Signed-off-by: Ben Levinsky <ben.levinsky@xilinx.com> Signed-off-by: Jason Wu <j.wu@xilinx.com> Signed-off-by: Wendy Liang <jliang@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> --- Changes since v2: - update zynqmp_r5 yaml parsing to not raise warnings for extra information in children of R5 node. The warning "node has a unit name, but no reg or ranges property" will still be raised though as this particular node is needed to describe the '#address-cells' and '#size-cells' information. Changes since 3: - remove warning '/example-0/rpu@ff9a0000/r5@0: node has a unit name, but no reg or ranges property' by adding reg to r5 node. --- .../remoteproc/xilinx,zynqmp-r5-remoteproc.yaml | 127 +++++++++++++++++++++ 1 file changed, 127 insertions(+) create mode 100644 Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.yaml diff --git a/Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.yaml b/Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.yaml new file mode 100644 index 0000000..41520b6 --- /dev/null +++ b/Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.yaml @@ -0,0 +1,127 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/remoteproc/xilinx,zynqmp-r5-remoteproc.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Xilinx R5 remote processor controller bindings + +description: + This document defines the binding for the remoteproc component that loads and + boots firmwares on the Xilinx Zynqmp and Versal family chipset. + +maintainers: + - Ed Mooring <ed.mooring@xilinx.com> + - Ben Levinsky <ben.levinsky@xilinx.com> + +properties: + compatible: + const: "xlnx,zynqmp-r5-remoteproc-1.0" + + core_conf: + description: + R5 core configuration (valid string - split or lock-step) + maxItems: 1 + + interrupts: + description: + Interrupt mapping for remoteproc IPI. It is required if the + user uses the remoteproc driver with the RPMsg kernel driver. + maxItems: 6 + + memory-region: + maxItems: 4 + minItems: 4 + pnode-id: + maxItems: 1 + mboxes: + maxItems: 2 + mbox-names: + maxItems: 2 + + r5@0: + type: object + required: + - '#address-cells' + - '#size-cells' + - pnode-id +examples: + - | + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + rpu0vdev0vring0: rpu0vdev0vring0@3ed40000 { + no-map; + reg = <0x3ed40000 0x4000>; + }; + rpu0vdev0vring1: rpu0vdev0vring1@3ed44000 { + no-map; + reg = <0x3ed44000 0x4000>; + }; + rpu0vdev0buffer: rpu0vdev0buffer@3ed48000 { + no-map; + reg = <0x3ed48000 0x100000>; + }; + rproc_0_reserved: rproc@3ed000000 { + no-map; + reg = <0x3ed00000 0x40000>; + }; + }; + rpu: rpu@ff9a0000 { + compatible = "xlnx,zynqmp-r5-remoteproc-1.0"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + core_conf = "split"; + reg = <0xFF9A0000 0x10000>; + r5_0: r5@0 { + ranges; + #address-cells = <1>; + #size-cells = <1>; + reg = <0xFF9A0100 0x1000>; + memory-region = <&rproc_0_reserved>, <&rpu0vdev0buffer>, <&rpu0vdev0vring0>, <&rpu0vdev0vring1>; + pnode-id = <0x7>; + mboxes = <&ipi_mailbox_rpu0 0>, <&ipi_mailbox_rpu0 1>; + mbox-names = "tx", "rx"; + tcm_0_a: tcm_0@0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xFFE00000 0x10000>; + pnode-id = <0xf>; + }; + tcm_0_b: tcm_0@1 { + #address-cells = <2>; + #size-cells = <2>; + reg = <0xFFE20000 0x10000>; + pnode-id = <0x10>; + }; + }; + }; + + + zynqmp_ipi1 { + compatible = "xlnx,zynqmp-ipi-mailbox"; + interrupt-parent = <&gic>; + interrupts = <0 29 4>; + xlnx,ipi-id = <7>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* APU<->RPU0 IPI mailbox controller */ + ipi_mailbox_rpu0: mailbox@ff90000 { + reg = <0xff990600 0x20>, + <0xff990620 0x20>, + <0xff9900c0 0x20>, + <0xff9900e0 0x20>; + reg-names = "local_request_region", + "local_response_region", + "remote_request_region", + "remote_response_region"; + #mbox-cells = <1>; + xlnx,ipi-id = <1>; + }; + }; + +... -- 2.7.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-04-24 17:36 UTC|newest] Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-04-24 17:36 [PATCH v4 0/5] remoteproc: Add zynqmp_r5 driver Ben Levinsky 2020-04-24 17:36 ` Ben Levinsky 2020-04-24 17:36 ` [PATCH v4 1/5] firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU configuration Ben Levinsky 2020-04-24 17:36 ` Ben Levinsky 2020-04-24 17:36 ` [PATCH v4 2/5] firmware: xilinx: Add shutdown/wakeup APIs Ben Levinsky 2020-04-24 17:36 ` Ben Levinsky 2020-04-24 17:36 ` [PATCH v4 3/5] firmware: xilinx: Add RPU configuration APIs Ben Levinsky 2020-04-24 17:36 ` Ben Levinsky 2020-04-24 17:36 ` Ben Levinsky [this message] 2020-04-24 17:36 ` [PATCH v4 4/5] dt-bindings: remoteproc: Add documentation for ZynqMP R5 rproc bindings Ben Levinsky 2020-05-11 22:17 ` Rob Herring 2020-05-11 22:17 ` Rob Herring 2020-05-26 17:40 ` Ben Levinsky 2020-05-26 17:40 ` Ben Levinsky 2020-06-10 20:38 ` Rob Herring 2020-06-10 20:38 ` Rob Herring 2020-06-30 0:37 ` Stefano Stabellini 2020-06-30 0:37 ` Stefano Stabellini 2020-06-30 2:20 ` Bjorn Andersson 2020-06-30 2:20 ` Bjorn Andersson 2020-06-30 15:38 ` Ben Levinsky 2020-06-30 15:38 ` Ben Levinsky 2020-06-30 17:11 ` Ben Levinsky 2020-06-30 17:11 ` Ben Levinsky 2020-07-10 17:42 ` Stefano Stabellini 2020-07-10 17:42 ` Stefano Stabellini 2020-04-24 17:36 ` [PATCH v4 5/5] remoteproc: Add initial zynqmp R5 remoteproc driver Ben Levinsky 2020-04-24 17:36 ` Ben Levinsky 2020-05-05 20:53 ` Mathieu Poirier 2020-05-05 20:53 ` Mathieu Poirier 2020-05-06 21:36 ` Mathieu Poirier 2020-05-06 21:36 ` Mathieu Poirier 2020-05-07 22:08 ` Mathieu Poirier 2020-05-07 22:08 ` Mathieu Poirier
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1587749770-15082-5-git-send-email-ben.levinsky@xilinx.com \ --to=ben.levinsky@xilinx.com \ --cc=bjorn.andersson@linaro.org \ --cc=devicetree@vger.kernel.org \ --cc=j.wu@xilinx.com \ --cc=jliang@xilinx.com \ --cc=jollys@xilinx.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-remoteproc@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=michal.simek@xilinx.com \ --cc=ohad@wizery.com \ --cc=rajan.vaja@xilinx.com \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.