* [PATCH v1 1/4] target/microblaze: gdb: Add dynamic GDB XML register support
2020-05-11 17:05 [PATCH v1 0/4] target/microblaze: Add dynamic GDB XML and correct SReg reporting Joe Komlodi
@ 2020-05-11 17:05 ` Joe Komlodi
2020-05-11 17:05 ` [PATCH v1 2/4] target/microblaze: gdb: Extend the number of registers presented to GDB Joe Komlodi
` (4 subsequent siblings)
5 siblings, 0 replies; 8+ messages in thread
From: Joe Komlodi @ 2020-05-11 17:05 UTC (permalink / raw)
To: qemu-devel; +Cc: edgar.iglesias
Add dynamic GDB register XML for Microblaze, and modify the config file to
use XML when building for Microblaze.
For the dynamic XML to be read, there still needs to be a core XML file.
Signed-off-by: Joe Komlodi <komlodi@xilinx.com>
---
configure | 1 +
target/microblaze/cpu.c | 4 ++
target/microblaze/cpu.h | 9 ++++
target/microblaze/gdbstub.c | 123 ++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 137 insertions(+)
diff --git a/configure b/configure
index 0d69c36..5a099b6 100755
--- a/configure
+++ b/configure
@@ -7832,6 +7832,7 @@ case "$target_name" in
TARGET_ARCH=microblaze
TARGET_SYSTBL_ABI=common
bflt="yes"
+ gdb_xml_files="microblaze-core.xml"
echo "TARGET_ABI32=y" >> $config_target_mak
;;
mips|mipsel)
diff --git a/target/microblaze/cpu.c b/target/microblaze/cpu.c
index aa99830..41cac1b 100644
--- a/target/microblaze/cpu.c
+++ b/target/microblaze/cpu.c
@@ -226,6 +226,8 @@ static void mb_cpu_realizefn(DeviceState *dev, Error **errp)
env->pvr.regs[11] = (cpu->cfg.use_mmu ? PVR11_USE_MMU : 0) |
16 << 17;
+ mb_gen_dynamic_xml(cpu);
+
mcc->parent_realize(dev, errp);
}
@@ -330,6 +332,8 @@ static void mb_cpu_class_init(ObjectClass *oc, void *data)
dc->vmsd = &vmstate_mb_cpu;
device_class_set_props(dc, mb_properties);
cc->gdb_num_core_regs = 32 + 5;
+ cc->gdb_get_dynamic_xml = mb_gdb_get_dynamic_xml;
+ cc->gdb_core_xml_file = "microblaze-core.xml";
cc->disas_set_info = mb_disas_set_info;
cc->tcg_initialize = mb_tcg_init;
diff --git a/target/microblaze/cpu.h b/target/microblaze/cpu.h
index a31134b..074a18e 100644
--- a/target/microblaze/cpu.h
+++ b/target/microblaze/cpu.h
@@ -25,6 +25,8 @@
#include "fpu/softfloat-types.h"
typedef struct CPUMBState CPUMBState;
+typedef struct DynamicMBGDBXMLInfo DynamicMBGDBXMLInfo;
+
#if !defined(CONFIG_USER_ONLY)
#include "mmu.h"
#endif
@@ -272,6 +274,10 @@ struct CPUMBState {
} pvr;
};
+struct DynamicMBGDBXMLInfo {
+ char *xml;
+};
+
/**
* MicroBlazeCPU:
* @env: #CPUMBState
@@ -286,6 +292,7 @@ struct MicroBlazeCPU {
CPUNegativeOffsetState neg;
CPUMBState env;
+ DynamicMBGDBXMLInfo dyn_xml;
/* Microblaze Configuration Settings */
struct {
@@ -321,6 +328,8 @@ void mb_cpu_dump_state(CPUState *cpu, FILE *f, int flags);
hwaddr mb_cpu_get_phys_page_debug(CPUState *cpu, vaddr addr);
int mb_cpu_gdb_read_register(CPUState *cpu, GByteArray *buf, int reg);
int mb_cpu_gdb_write_register(CPUState *cpu, uint8_t *buf, int reg);
+void mb_gen_dynamic_xml(MicroBlazeCPU *cpu);
+const char *mb_gdb_get_dynamic_xml(CPUState *cs, const char *xmlname);
void mb_tcg_init(void);
/* you can call this signal handler from your SIGBUS and SIGSEGV
diff --git a/target/microblaze/gdbstub.c b/target/microblaze/gdbstub.c
index f41ebf1..cdca434 100644
--- a/target/microblaze/gdbstub.c
+++ b/target/microblaze/gdbstub.c
@@ -54,3 +54,126 @@ int mb_cpu_gdb_write_register(CPUState *cs, uint8_t *mem_buf, int n)
}
return 4;
}
+
+static void mb_gen_xml_reg_tag(const MicroBlazeCPU *cpu, GString *s,
+ const char *name, uint8_t bitsize,
+ const char *type)
+{
+ g_string_append_printf(s, "<reg name=\"%s\" bitsize=\"%d\"",
+ name, bitsize);
+ if (type) {
+ g_string_append_printf(s, " type=\"%s\"", type);
+ }
+ g_string_append_printf(s, "/>\n");
+}
+
+static uint8_t mb_cpu_sreg_size(const MicroBlazeCPU *cpu, uint8_t index)
+{
+ /*
+ * NOTE: mb-gdb will refuse to connect if we say registers are
+ * larger then 32-bits.
+ * For now, say none of our registers are dynamically sized, and are
+ * therefore only 32-bits.
+ */
+
+ return 32;
+}
+
+static void mb_gen_xml_reg_tags(const MicroBlazeCPU *cpu, GString *s)
+{
+ uint8_t i;
+ const char *type;
+ char reg_name[4];
+ bool has_hw_exception = cpu->cfg.dopb_bus_exception ||
+ cpu->cfg.iopb_bus_exception ||
+ cpu->cfg.illegal_opcode_exception ||
+ cpu->cfg.opcode_0_illegal ||
+ cpu->cfg.div_zero_exception ||
+ cpu->cfg.unaligned_exceptions;
+
+ static const char *reg_types[32] = {
+ [1] = "data_ptr",
+ [14] = "code_ptr",
+ [15] = "code_ptr",
+ [16] = "code_ptr",
+ [17] = "code_ptr"
+ };
+
+ for (i = 0; i < 32; ++i) {
+ type = reg_types[i];
+ /* r17 only has a code_ptr tag if we have HW exceptions */
+ if (i == 17 && !has_hw_exception) {
+ type = NULL;
+ }
+
+ sprintf(reg_name, "r%d", i);
+ mb_gen_xml_reg_tag(cpu, s, reg_name, 32, type);
+ }
+}
+
+static void mb_gen_xml_sreg_tags(const MicroBlazeCPU *cpu, GString *s)
+{
+ uint8_t i;
+
+ static const char *sreg_names[] = {
+ "rpc",
+ "rmsr",
+ "rear",
+ "resr",
+ "rfsr",
+ "rbtr",
+ "rpvr0",
+ "rpvr1",
+ "rpvr2",
+ "rpvr3",
+ "rpvr4",
+ "rpvr5",
+ "rpvr6",
+ "rpvr7",
+ "rpvr8",
+ "rpvr9",
+ "rpvr10",
+ "rpvr11",
+ "redr",
+ "rpid",
+ "rzpr",
+ "rtlblo",
+ "rtlbhi",
+ "rtlbx",
+ "rtlbsx",
+ "rslr",
+ "rshr"
+ };
+
+ static const char *sreg_types[ARRAY_SIZE(sreg_names)] = {
+ [SR_PC] = "code_ptr"
+ };
+
+ for (i = 0; i < ARRAY_SIZE(sreg_names); ++i) {
+ mb_gen_xml_reg_tag(cpu, s, sreg_names[i], mb_cpu_sreg_size(cpu, i),
+ sreg_types[i]);
+ }
+}
+
+void mb_gen_dynamic_xml(MicroBlazeCPU *cpu)
+{
+ GString *s = g_string_new(NULL);
+
+ g_string_printf(s, "<?xml version=\"1.0\"?>\n"
+ "<!DOCTYPE feature SYSTEM \"gdb-target.dtd\">\n"
+ "<feature name=\"org.gnu.gdb.microblaze.core\">\n");
+
+ mb_gen_xml_reg_tags(cpu, s);
+ mb_gen_xml_sreg_tags(cpu, s);
+
+ g_string_append_printf(s, "</feature>");
+
+ cpu->dyn_xml.xml = g_string_free(s, false);
+}
+
+const char *mb_gdb_get_dynamic_xml(CPUState *cs, const char *xmlname)
+{
+ MicroBlazeCPU *cpu = MICROBLAZE_CPU(cs);
+
+ return cpu->dyn_xml.xml;
+}
--
2.7.4
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH v1 2/4] target/microblaze: gdb: Extend the number of registers presented to GDB
2020-05-11 17:05 [PATCH v1 0/4] target/microblaze: Add dynamic GDB XML and correct SReg reporting Joe Komlodi
2020-05-11 17:05 ` [PATCH v1 1/4] target/microblaze: gdb: Add dynamic GDB XML register support Joe Komlodi
@ 2020-05-11 17:05 ` Joe Komlodi
2020-05-11 17:05 ` [PATCH v1 3/4] target/microblaze: gdb: Fix incorrect SReg reporting Joe Komlodi
` (3 subsequent siblings)
5 siblings, 0 replies; 8+ messages in thread
From: Joe Komlodi @ 2020-05-11 17:05 UTC (permalink / raw)
To: qemu-devel; +Cc: edgar.iglesias
Increase the number of Microblaze registers QEMU will report when
talking to GDB.
Signed-off-by: Joe Komlodi <komlodi@xilinx.com>
---
target/microblaze/cpu.c | 2 +-
target/microblaze/gdbstub.c | 52 ++++++++++++++++++++++++++++++++++++++++++---
2 files changed, 50 insertions(+), 4 deletions(-)
diff --git a/target/microblaze/cpu.c b/target/microblaze/cpu.c
index 41cac1b..5b6ad5b 100644
--- a/target/microblaze/cpu.c
+++ b/target/microblaze/cpu.c
@@ -331,7 +331,7 @@ static void mb_cpu_class_init(ObjectClass *oc, void *data)
#endif
dc->vmsd = &vmstate_mb_cpu;
device_class_set_props(dc, mb_properties);
- cc->gdb_num_core_regs = 32 + 5;
+ cc->gdb_num_core_regs = 32 + 27;
cc->gdb_get_dynamic_xml = mb_gdb_get_dynamic_xml;
cc->gdb_core_xml_file = "microblaze-core.xml";
diff --git a/target/microblaze/gdbstub.c b/target/microblaze/gdbstub.c
index cdca434..af29f00 100644
--- a/target/microblaze/gdbstub.c
+++ b/target/microblaze/gdbstub.c
@@ -26,12 +26,37 @@ int mb_cpu_gdb_read_register(CPUState *cs, GByteArray *mem_buf, int n)
MicroBlazeCPU *cpu = MICROBLAZE_CPU(cs);
CPUMBState *env = &cpu->env;
+ /*
+ * GDB expects registers to be reported in this order:
+ * R0-R31
+ * PC-BTR
+ * PVR0-PVR11
+ * EDR-TLBHI
+ * SLR-SHR
+ */
if (n < 32) {
return gdb_get_reg32(mem_buf, env->regs[n]);
} else {
- return gdb_get_reg32(mem_buf, env->sregs[n - 32]);
+ n -= 32;
+ switch (n) {
+ case 0 ... 5:
+ return gdb_get_reg32(mem_buf, env->sregs[n]);
+ /* PVR12 is intentionally skipped */
+ case 6 ... 17:
+ n -= 6;
+ return gdb_get_reg32(mem_buf, env->pvr.regs[n]);
+ case 18 ... 24:
+ /* Add an offset of 6 to resume where we left off with SRegs */
+ n = n - 18 + 6;
+ return gdb_get_reg32(mem_buf, env->sregs[n]);
+ case 25:
+ return gdb_get_reg32(mem_buf, env->slr);
+ case 26:
+ return gdb_get_reg32(mem_buf, env->shr);
+ default:
+ return 0;
+ }
}
- return 0;
}
int mb_cpu_gdb_write_register(CPUState *cs, uint8_t *mem_buf, int n)
@@ -50,7 +75,28 @@ int mb_cpu_gdb_write_register(CPUState *cs, uint8_t *mem_buf, int n)
if (n < 32) {
env->regs[n] = tmp;
} else {
- env->sregs[n - 32] = tmp;
+ n -= 32;
+ switch (n) {
+ case 0 ... 5:
+ env->sregs[n] = tmp;
+ break;
+ /* PVR12 is intentionally skipped */
+ case 6 ... 17:
+ n -= 6;
+ env->pvr.regs[n] = tmp;
+ break;
+ case 18 ... 24:
+ /* Add an offset of 6 to resume where we left off with SRegs */
+ n = n - 18 + 6;
+ env->sregs[n] = tmp;
+ break;
+ case 25:
+ env->slr = tmp;
+ break;
+ case 26:
+ env->shr = tmp;
+ break;
+ }
}
return 4;
}
--
2.7.4
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH v1 3/4] target/microblaze: gdb: Fix incorrect SReg reporting
2020-05-11 17:05 [PATCH v1 0/4] target/microblaze: Add dynamic GDB XML and correct SReg reporting Joe Komlodi
2020-05-11 17:05 ` [PATCH v1 1/4] target/microblaze: gdb: Add dynamic GDB XML register support Joe Komlodi
2020-05-11 17:05 ` [PATCH v1 2/4] target/microblaze: gdb: Extend the number of registers presented to GDB Joe Komlodi
@ 2020-05-11 17:05 ` Joe Komlodi
2020-05-11 17:05 ` [PATCH v1 4/4] target/microblaze: monitor: Increase the number of registers reported Joe Komlodi
` (2 subsequent siblings)
5 siblings, 0 replies; 8+ messages in thread
From: Joe Komlodi @ 2020-05-11 17:05 UTC (permalink / raw)
To: qemu-devel; +Cc: edgar.iglesias
SRegs used to be reported to GDB by iterating over the SRegs array,
however we do not store them in an order that allows them to be
reported to GDB in that way.
To fix this, a simple map is used to map the register GDB wants to its
location in the SRegs array.
Signed-off-by: Joe Komlodi <komlodi@xilinx.com>
---
target/microblaze/gdbstub.c | 59 +++++++++++++++++++++++++++++++++++++--------
1 file changed, 49 insertions(+), 10 deletions(-)
diff --git a/target/microblaze/gdbstub.c b/target/microblaze/gdbstub.c
index af29f00..485b717 100644
--- a/target/microblaze/gdbstub.c
+++ b/target/microblaze/gdbstub.c
@@ -25,6 +25,21 @@ int mb_cpu_gdb_read_register(CPUState *cs, GByteArray *mem_buf, int n)
{
MicroBlazeCPU *cpu = MICROBLAZE_CPU(cs);
CPUMBState *env = &cpu->env;
+ /*
+ * GDB expects SREGs in the following order:
+ * PC, MSR, EAR, ESR, FSR, BTR, EDR, PID, ZPR, TLBX, TLBSX, TLBLO, TLBHI.
+ * They aren't stored in this order, so make a map.
+ * PID, ZPR, TLBx, TLBsx, TLBLO, and TLBHI aren't modeled, so we don't
+ * map them to anything and return a value of 0 instead.
+ */
+ static const uint8_t sreg_map[6] = {
+ SR_PC,
+ SR_MSR,
+ SR_EAR,
+ SR_ESR,
+ SR_FSR,
+ SR_BTR
+ };
/*
* GDB expects registers to be reported in this order:
@@ -40,15 +55,16 @@ int mb_cpu_gdb_read_register(CPUState *cs, GByteArray *mem_buf, int n)
n -= 32;
switch (n) {
case 0 ... 5:
- return gdb_get_reg32(mem_buf, env->sregs[n]);
+ return gdb_get_reg32(mem_buf, env->sregs[sreg_map[n]]);
/* PVR12 is intentionally skipped */
case 6 ... 17:
n -= 6;
return gdb_get_reg32(mem_buf, env->pvr.regs[n]);
- case 18 ... 24:
- /* Add an offset of 6 to resume where we left off with SRegs */
- n = n - 18 + 6;
- return gdb_get_reg32(mem_buf, env->sregs[n]);
+ case 18:
+ return gdb_get_reg32(mem_buf, env->sregs[SR_EDR]);
+ /* Other SRegs aren't modeled, so report a value of 0 */
+ case 19 ... 24:
+ return gdb_get_reg32(mem_buf, 0);
case 25:
return gdb_get_reg32(mem_buf, env->slr);
case 26:
@@ -66,29 +82,52 @@ int mb_cpu_gdb_write_register(CPUState *cs, uint8_t *mem_buf, int n)
CPUMBState *env = &cpu->env;
uint32_t tmp;
+ /*
+ * GDB expects SREGs in the following order:
+ * PC, MSR, EAR, ESR, FSR, BTR, EDR, PID, ZPR, TLBX, TLBSX, TLBLO, TLBHI.
+ * They aren't stored in this order, so make a map.
+ * PID, ZPR, TLBx, TLBsx, TLBLO, and TLBHI aren't modeled, so we don't
+ * map them to anything.
+ */
+ static const uint8_t sreg_map[6] = {
+ SR_PC,
+ SR_MSR,
+ SR_EAR,
+ SR_ESR,
+ SR_FSR,
+ SR_BTR
+ };
+
if (n > cc->gdb_num_core_regs) {
return 0;
}
tmp = ldl_p(mem_buf);
+ /*
+ * GDB expects registers to be reported in this order:
+ * R0-R31
+ * PC-BTR
+ * PVR0-PVR11
+ * EDR-TLBHI
+ * SLR-SHR
+ */
if (n < 32) {
env->regs[n] = tmp;
} else {
n -= 32;
switch (n) {
case 0 ... 5:
- env->sregs[n] = tmp;
+ env->sregs[sreg_map[n]] = tmp;
break;
/* PVR12 is intentionally skipped */
case 6 ... 17:
n -= 6;
env->pvr.regs[n] = tmp;
break;
- case 18 ... 24:
- /* Add an offset of 6 to resume where we left off with SRegs */
- n = n - 18 + 6;
- env->sregs[n] = tmp;
+ /* Only EDR is modeled in these indeces, so ignore the rest */
+ case 18:
+ env->sregs[SR_EDR] = tmp;
break;
case 25:
env->slr = tmp;
--
2.7.4
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH v1 4/4] target/microblaze: monitor: Increase the number of registers reported
2020-05-11 17:05 [PATCH v1 0/4] target/microblaze: Add dynamic GDB XML and correct SReg reporting Joe Komlodi
` (2 preceding siblings ...)
2020-05-11 17:05 ` [PATCH v1 3/4] target/microblaze: gdb: Fix incorrect SReg reporting Joe Komlodi
@ 2020-05-11 17:05 ` Joe Komlodi
2020-05-13 11:46 ` [PATCH v1 0/4] target/microblaze: Add dynamic GDB XML and correct SReg reporting Edgar E. Iglesias
2020-05-13 17:28 ` Edgar E. Iglesias
5 siblings, 0 replies; 8+ messages in thread
From: Joe Komlodi @ 2020-05-11 17:05 UTC (permalink / raw)
To: qemu-devel; +Cc: edgar.iglesias
Increase the number of registers reported to match GDB.
Registers that aren't modeled are reported as 0.
Signed-off-by: Joe Komlodi <komlodi@xilinx.com>
---
target/microblaze/translate.c | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)
diff --git a/target/microblaze/translate.c b/target/microblaze/translate.c
index 20b7427..4e7f903a 100644
--- a/target/microblaze/translate.c
+++ b/target/microblaze/translate.c
@@ -1788,9 +1788,11 @@ void mb_cpu_dump_state(CPUState *cs, FILE *f, int flags)
qemu_fprintf(f, "IN: PC=%" PRIx64 " %s\n",
env->sregs[SR_PC], lookup_symbol(env->sregs[SR_PC]));
qemu_fprintf(f, "rmsr=%" PRIx64 " resr=%" PRIx64 " rear=%" PRIx64 " "
- "debug=%x imm=%x iflags=%x fsr=%" PRIx64 "\n",
+ "debug=%x imm=%x iflags=%x fsr=%" PRIx64 " "
+ "rbtr=%" PRIx64 "\n",
env->sregs[SR_MSR], env->sregs[SR_ESR], env->sregs[SR_EAR],
- env->debug, env->imm, env->iflags, env->sregs[SR_FSR]);
+ env->debug, env->imm, env->iflags, env->sregs[SR_FSR],
+ env->sregs[SR_BTR]);
qemu_fprintf(f, "btaken=%d btarget=%" PRIx64 " mode=%s(saved=%s) "
"eip=%d ie=%d\n",
env->btaken, env->btarget,
@@ -1798,7 +1800,17 @@ void mb_cpu_dump_state(CPUState *cs, FILE *f, int flags)
(env->sregs[SR_MSR] & MSR_UMS) ? "user" : "kernel",
(bool)(env->sregs[SR_MSR] & MSR_EIP),
(bool)(env->sregs[SR_MSR] & MSR_IE));
+ for (i = 0; i < 12; i++) {
+ qemu_fprintf(f, "rpvr%2.2d=%8.8x ", i, env->pvr.regs[i]);
+ if ((i + 1) % 4 == 0) {
+ qemu_fprintf(f, "\n");
+ }
+ }
+ /* Registers that aren't modeled are reported as 0 */
+ qemu_fprintf(f, "redr=%" PRIx64 " rpid=0 rzpr=0 rtlbx=0 rtlbsx=0 "
+ "rtlblo=0 rtlbhi=0\n", env->sregs[SR_EDR]);
+ qemu_fprintf(f, "slr=%x shr=%x\n", env->slr, env->shr);
for (i = 0; i < 32; i++) {
qemu_fprintf(f, "r%2.2d=%8.8x ", i, env->regs[i]);
if ((i + 1) % 4 == 0)
--
2.7.4
^ permalink raw reply related [flat|nested] 8+ messages in thread* Re: [PATCH v1 0/4] target/microblaze: Add dynamic GDB XML and correct SReg reporting
2020-05-11 17:05 [PATCH v1 0/4] target/microblaze: Add dynamic GDB XML and correct SReg reporting Joe Komlodi
` (3 preceding siblings ...)
2020-05-11 17:05 ` [PATCH v1 4/4] target/microblaze: monitor: Increase the number of registers reported Joe Komlodi
@ 2020-05-13 11:46 ` Edgar E. Iglesias
2020-05-13 17:28 ` Edgar E. Iglesias
5 siblings, 0 replies; 8+ messages in thread
From: Edgar E. Iglesias @ 2020-05-13 11:46 UTC (permalink / raw)
To: Joe Komlodi; +Cc: qemu-devel
On Mon, May 11, 2020 at 10:05:47AM -0700, Joe Komlodi wrote:
> Hi all,
>
> This series adds dynamic GDB XML support for Micraoblaze CPUs, and fixes
> an issue when reporting Microblaze SRegs through GDB.
>
> The SRegs used to be printed out by iterating over the SReg array, but the
> SReg array isn't laid out in memory in the same order that GDB expects them.
>
> When reporting register to GDB, note that even though 32-bit Microblaze
> supports having certain registers wider than 32-bits, we're repoting all of
> them as being 32-bits wide right now to maintain compatibility with GDB.
>
> Thanks!
> Joe
Thanks Joe!
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
>
> Joe Komlodi (4):
> target/microblaze: gdb: Add dynamic GDB XML register support
> target/microblaze: gdb: Extend the number of registers presented to
> GDB
> target/microblaze: gdb: Fix incorrect SReg reporting
> target/microblaze: monitor: Increase the number of registers reported
>
> configure | 1 +
> target/microblaze/cpu.c | 6 +-
> target/microblaze/cpu.h | 9 ++
> target/microblaze/gdbstub.c | 214 +++++++++++++++++++++++++++++++++++++++++-
> target/microblaze/translate.c | 16 +++-
> 5 files changed, 240 insertions(+), 6 deletions(-)
>
> --
> 2.7.4
>
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [PATCH v1 0/4] target/microblaze: Add dynamic GDB XML and correct SReg reporting
2020-05-11 17:05 [PATCH v1 0/4] target/microblaze: Add dynamic GDB XML and correct SReg reporting Joe Komlodi
` (4 preceding siblings ...)
2020-05-13 11:46 ` [PATCH v1 0/4] target/microblaze: Add dynamic GDB XML and correct SReg reporting Edgar E. Iglesias
@ 2020-05-13 17:28 ` Edgar E. Iglesias
2020-05-13 17:56 ` Joe Komlodi
5 siblings, 1 reply; 8+ messages in thread
From: Edgar E. Iglesias @ 2020-05-13 17:28 UTC (permalink / raw)
To: Joe Komlodi; +Cc: qemu-devel
On Mon, May 11, 2020 at 10:05:47AM -0700, Joe Komlodi wrote:
> Hi all,
>
> This series adds dynamic GDB XML support for Micraoblaze CPUs, and fixes
> an issue when reporting Microblaze SRegs through GDB.
>
> The SRegs used to be printed out by iterating over the SReg array, but the
> SReg array isn't laid out in memory in the same order that GDB expects them.
>
> When reporting register to GDB, note that even though 32-bit Microblaze
> supports having certain registers wider than 32-bits, we're repoting all of
> them as being 32-bits wide right now to maintain compatibility with GDB.
>
> Thanks!
> Joe
Hi Joe,
Looks like you forgot the patch that adds the xml file?
Thanks,
Edgar
>
> Joe Komlodi (4):
> target/microblaze: gdb: Add dynamic GDB XML register support
> target/microblaze: gdb: Extend the number of registers presented to
> GDB
> target/microblaze: gdb: Fix incorrect SReg reporting
> target/microblaze: monitor: Increase the number of registers reported
>
> configure | 1 +
> target/microblaze/cpu.c | 6 +-
> target/microblaze/cpu.h | 9 ++
> target/microblaze/gdbstub.c | 214 +++++++++++++++++++++++++++++++++++++++++-
> target/microblaze/translate.c | 16 +++-
> 5 files changed, 240 insertions(+), 6 deletions(-)
>
> --
> 2.7.4
>
^ permalink raw reply [flat|nested] 8+ messages in thread* RE: [PATCH v1 0/4] target/microblaze: Add dynamic GDB XML and correct SReg reporting
2020-05-13 17:28 ` Edgar E. Iglesias
@ 2020-05-13 17:56 ` Joe Komlodi
0 siblings, 0 replies; 8+ messages in thread
From: Joe Komlodi @ 2020-05-13 17:56 UTC (permalink / raw)
To: Edgar Iglesias; +Cc: qemu-devel
Hi Edgar,
Ah, I did. It was in my directory but didn't get added to git.
It should have been part of the first patch.
I'll add it to the first patch and send up a v2.
Thanks!
Joe
-----Original Message-----
From: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Sent: Wednesday, May 13, 2020 10:29 AM
To: Joe Komlodi <komlodi@xilinx.com>
Cc: qemu-devel@nongnu.org
Subject: Re: [PATCH v1 0/4] target/microblaze: Add dynamic GDB XML and correct SReg reporting
On Mon, May 11, 2020 at 10:05:47AM -0700, Joe Komlodi wrote:
> Hi all,
>
> This series adds dynamic GDB XML support for Micraoblaze CPUs, and
> fixes an issue when reporting Microblaze SRegs through GDB.
>
> The SRegs used to be printed out by iterating over the SReg array, but
> the SReg array isn't laid out in memory in the same order that GDB expects them.
>
> When reporting register to GDB, note that even though 32-bit
> Microblaze supports having certain registers wider than 32-bits, we're
> repoting all of them as being 32-bits wide right now to maintain compatibility with GDB.
>
> Thanks!
> Joe
Hi Joe,
Looks like you forgot the patch that adds the xml file?
Thanks,
Edgar
>
> Joe Komlodi (4):
> target/microblaze: gdb: Add dynamic GDB XML register support
> target/microblaze: gdb: Extend the number of registers presented to
> GDB
> target/microblaze: gdb: Fix incorrect SReg reporting
> target/microblaze: monitor: Increase the number of registers
> reported
>
> configure | 1 +
> target/microblaze/cpu.c | 6 +-
> target/microblaze/cpu.h | 9 ++
> target/microblaze/gdbstub.c | 214 +++++++++++++++++++++++++++++++++++++++++-
> target/microblaze/translate.c | 16 +++-
> 5 files changed, 240 insertions(+), 6 deletions(-)
>
> --
> 2.7.4
>
^ permalink raw reply [flat|nested] 8+ messages in thread