[PATCH V3 0/8] Tegra XUSB charger detect support

[PATCH V3 0/8] Tegra XUSB charger detect support

[Nagarjuna Kristam]

This patch series adds charger detect support on XUSB hardware used in
Tegra210 and Tegra186 SoCs.

This patchset is composed with :
 - dt bindings of XUSB Pad Controller
 - Tegra XUSB device mode driver to add vbus_draw support 
 - Tegra PHY driver for charger detect support

Tests done:
 - Connect USB cable from ubuntu host to micro-B port of DUT to detect
   SDP_TYPE charger
 - Connect USB cable from external powered USB hub(which inturn connects
   to ubuntu host) to micro-B port of DUT to detect CDP_TYPE charger.
 - Connect USB cable from USB charger to micro-B port of DUT to detect
   DCP_TYPE charger.
DUT: Jetson-tx1, Jetson tx2.

V3:
 - Added ACKed-by details for PHY driver and DT changes.
 - Functions and its arguments are aligned.
 - Tabs are used for alignment of MACRO's
 - For vbus_draw USDC callback, usb_phy set_power error is propogated.
 - Fixed various comments given by thierry.
V2:
 - Added ACKed-by details for DT patches.
 - All patches rebased.

Nagarjuna Kristam (8):
  dt-bindings: phy: tegra-xusb: Add charger-detect property
  usb: gadget: tegra-xudc: Add vbus_draw support
  phy: tegra: xusb: Add support for UTMI pad power control
  phy: tegra: xusb: Add USB2 pad power control support for Tegra210
  phy: tegra: xusb: Add soc ops API to enable UTMI PAD protection
  phy: tegra: xusb: Add support for charger detect
  phy: tegra: xusb: Enable charger detect for Tegra186
  phy: tegra: xusb: Enable charger detect for Tegra210

 .../bindings/phy/nvidia,tegra124-xusb-padctl.txt   |   4 +
 drivers/phy/tegra/Makefile                         |   2 +-
 drivers/phy/tegra/cd.c                             | 283 +++++++++++++++++++++
 drivers/phy/tegra/xusb-tegra186.c                  |  92 +++++--
 drivers/phy/tegra/xusb-tegra210.c                  | 223 +++++++++++-----
 drivers/phy/tegra/xusb.c                           |  80 ++++++
 drivers/phy/tegra/xusb.h                           |  22 ++
 drivers/usb/gadget/udc/tegra-xudc.c                |  17 ++
 8 files changed, 638 insertions(+), 85 deletions(-)
 create mode 100644 drivers/phy/tegra/cd.c

-- 
2.7.4

[PATCH V3 0/8] Tegra XUSB charger detect support

[Nagarjuna Kristam]

This patch series adds charger detect support on XUSB hardware used in
Tegra210 and Tegra186 SoCs.

This patchset is composed with :
 - dt bindings of XUSB Pad Controller
 - Tegra XUSB device mode driver to add vbus_draw support 
 - Tegra PHY driver for charger detect support

Tests done:
 - Connect USB cable from ubuntu host to micro-B port of DUT to detect
   SDP_TYPE charger
 - Connect USB cable from external powered USB hub(which inturn connects
   to ubuntu host) to micro-B port of DUT to detect CDP_TYPE charger.
 - Connect USB cable from USB charger to micro-B port of DUT to detect
   DCP_TYPE charger.
DUT: Jetson-tx1, Jetson tx2.

V3:
 - Added ACKed-by details for PHY driver and DT changes.
 - Functions and its arguments are aligned.
 - Tabs are used for alignment of MACRO's
 - For vbus_draw USDC callback, usb_phy set_power error is propogated.
 - Fixed various comments given by thierry.
V2:
 - Added ACKed-by details for DT patches.
 - All patches rebased.

Nagarjuna Kristam (8):
  dt-bindings: phy: tegra-xusb: Add charger-detect property
  usb: gadget: tegra-xudc: Add vbus_draw support
  phy: tegra: xusb: Add support for UTMI pad power control
  phy: tegra: xusb: Add USB2 pad power control support for Tegra210
  phy: tegra: xusb: Add soc ops API to enable UTMI PAD protection
  phy: tegra: xusb: Add support for charger detect
  phy: tegra: xusb: Enable charger detect for Tegra186
  phy: tegra: xusb: Enable charger detect for Tegra210

 .../bindings/phy/nvidia,tegra124-xusb-padctl.txt   |   4 +
 drivers/phy/tegra/Makefile                         |   2 +-
 drivers/phy/tegra/cd.c                             | 283 +++++++++++++++++++++
 drivers/phy/tegra/xusb-tegra186.c                  |  92 +++++--
 drivers/phy/tegra/xusb-tegra210.c                  | 223 +++++++++++-----
 drivers/phy/tegra/xusb.c                           |  80 ++++++
 drivers/phy/tegra/xusb.h                           |  22 ++
 drivers/usb/gadget/udc/tegra-xudc.c                |  17 ++
 8 files changed, 638 insertions(+), 85 deletions(-)
 create mode 100644 drivers/phy/tegra/cd.c

-- 
2.7.4

[PATCH V3 2/8] usb: gadget: tegra-xudc: Add vbus_draw support

[Nagarjuna Kristam]

Register vbus_draw to gadget ops and update corresponding vbus
draw current to usb_phy.

Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
---
V3:
 - Propogated usb_phy->set_power error to vbus_draw caller.
---
V2:
 - Patch re-based.
---
 drivers/usb/gadget/udc/tegra-xudc.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/usb/gadget/udc/tegra-xudc.c b/drivers/usb/gadget/udc/tegra-xudc.c
index 52a6add..53e2d1c 100644
--- a/drivers/usb/gadget/udc/tegra-xudc.c
+++ b/drivers/usb/gadget/udc/tegra-xudc.c
@@ -492,6 +492,7 @@ struct tegra_xudc {
 	bool powergated;
 
 	struct usb_phy **usbphy;
+	struct usb_phy *curr_usbphy;
 	struct notifier_block vbus_nb;
 
 	struct completion disconnect_complete;
@@ -719,6 +720,7 @@ static int tegra_xudc_vbus_notify(struct notifier_block *nb,
 	if (!xudc->suspended && phy_index != -1) {
 		xudc->curr_utmi_phy = xudc->utmi_phy[phy_index];
 		xudc->curr_usb3_phy = xudc->usb3_phy[phy_index];
+		xudc->curr_usbphy = usbphy;
 		schedule_work(&xudc->usb_role_sw_work);
 	}
 
@@ -2042,6 +2044,20 @@ static int tegra_xudc_gadget_stop(struct usb_gadget *gadget)
 	return 0;
 }
 
+static int tegra_xudc_gadget_vbus_draw(struct usb_gadget *gadget,
+						unsigned int m_a)
+{
+	int ret = 0;
+	struct tegra_xudc *xudc = to_xudc(gadget);
+
+	dev_dbg(xudc->dev, "%s: %u mA\n", __func__, m_a);
+
+	if (xudc->curr_usbphy->chg_type == SDP_TYPE)
+		ret = usb_phy_set_power(xudc->curr_usbphy, m_a);
+
+	return ret;
+}
+
 static int tegra_xudc_set_selfpowered(struct usb_gadget *gadget, int is_on)
 {
 	struct tegra_xudc *xudc = to_xudc(gadget);
@@ -2058,6 +2074,7 @@ static struct usb_gadget_ops tegra_xudc_gadget_ops = {
 	.pullup = tegra_xudc_gadget_pullup,
 	.udc_start = tegra_xudc_gadget_start,
 	.udc_stop = tegra_xudc_gadget_stop,
+	.vbus_draw = tegra_xudc_gadget_vbus_draw,
 	.set_selfpowered = tegra_xudc_set_selfpowered,
 };
 
-- 
2.7.4

[PATCH V3 2/8] usb: gadget: tegra-xudc: Add vbus_draw support

[Nagarjuna Kristam]

Register vbus_draw to gadget ops and update corresponding vbus
draw current to usb_phy.

Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
---
V3:
 - Propogated usb_phy->set_power error to vbus_draw caller.
---
V2:
 - Patch re-based.
---
 drivers/usb/gadget/udc/tegra-xudc.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/usb/gadget/udc/tegra-xudc.c b/drivers/usb/gadget/udc/tegra-xudc.c
index 52a6add..53e2d1c 100644
--- a/drivers/usb/gadget/udc/tegra-xudc.c
+++ b/drivers/usb/gadget/udc/tegra-xudc.c
@@ -492,6 +492,7 @@ struct tegra_xudc {
 	bool powergated;
 
 	struct usb_phy **usbphy;
+	struct usb_phy *curr_usbphy;
 	struct notifier_block vbus_nb;
 
 	struct completion disconnect_complete;
@@ -719,6 +720,7 @@ static int tegra_xudc_vbus_notify(struct notifier_block *nb,
 	if (!xudc->suspended && phy_index != -1) {
 		xudc->curr_utmi_phy = xudc->utmi_phy[phy_index];
 		xudc->curr_usb3_phy = xudc->usb3_phy[phy_index];
+		xudc->curr_usbphy = usbphy;
 		schedule_work(&xudc->usb_role_sw_work);
 	}
 
@@ -2042,6 +2044,20 @@ static int tegra_xudc_gadget_stop(struct usb_gadget *gadget)
 	return 0;
 }
 
+static int tegra_xudc_gadget_vbus_draw(struct usb_gadget *gadget,
+						unsigned int m_a)
+{
+	int ret = 0;
+	struct tegra_xudc *xudc = to_xudc(gadget);
+
+	dev_dbg(xudc->dev, "%s: %u mA\n", __func__, m_a);
+
+	if (xudc->curr_usbphy->chg_type == SDP_TYPE)
+		ret = usb_phy_set_power(xudc->curr_usbphy, m_a);
+
+	return ret;
+}
+
 static int tegra_xudc_set_selfpowered(struct usb_gadget *gadget, int is_on)
 {
 	struct tegra_xudc *xudc = to_xudc(gadget);
@@ -2058,6 +2074,7 @@ static struct usb_gadget_ops tegra_xudc_gadget_ops = {
 	.pullup = tegra_xudc_gadget_pullup,
 	.udc_start = tegra_xudc_gadget_start,
 	.udc_stop = tegra_xudc_gadget_stop,
+	.vbus_draw = tegra_xudc_gadget_vbus_draw,
 	.set_selfpowered = tegra_xudc_set_selfpowered,
 };
 
-- 
2.7.4

Re: [PATCH V3 2/8] usb: gadget: tegra-xudc: Add vbus_draw support

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 551 bytes --]

On Thu, May 14, 2020 at 11:52:37AM +0530, Nagarjuna Kristam wrote:
> Register vbus_draw to gadget ops and update corresponding vbus
> draw current to usb_phy.
> 
> Signed-off-by: Nagarjuna Kristam <nkristam-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
> ---
> V3:
>  - Propogated usb_phy->set_power error to vbus_draw caller.
> ---
> V2:
>  - Patch re-based.
> ---
>  drivers/usb/gadget/udc/tegra-xudc.c | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)

Acked-by: Thierry Reding <treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH V3 2/8] usb: gadget: tegra-xudc: Add vbus_draw support

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 493 bytes --]

On Thu, May 14, 2020 at 11:52:37AM +0530, Nagarjuna Kristam wrote:
> Register vbus_draw to gadget ops and update corresponding vbus
> draw current to usb_phy.
> 
> Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
> ---
> V3:
>  - Propogated usb_phy->set_power error to vbus_draw caller.
> ---
> V2:
>  - Patch re-based.
> ---
>  drivers/usb/gadget/udc/tegra-xudc.c | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)

Acked-by: Thierry Reding <treding@nvidia.com>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[PATCH V3 4/8] phy: tegra: xusb: Add USB2 pad power control support for Tegra210

[Nagarjuna Kristam]

Add USB2 pad power on and off API's for TEgra210 and provide its control
via soc ops. It can be used by operations like charger detect to power on
and off USB2 pad if needed.

Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
---
V3:
 - Added Acked-by updates to commit message.
---
V2:
 - Patch re-based.
---
 drivers/phy/tegra/xusb-tegra210.c | 190 ++++++++++++++++++++++++++------------
 1 file changed, 133 insertions(+), 57 deletions(-)

diff --git a/drivers/phy/tegra/xusb-tegra210.c b/drivers/phy/tegra/xusb-tegra210.c
index 66bd461..caf0890 100644
--- a/drivers/phy/tegra/xusb-tegra210.c
+++ b/drivers/phy/tegra/xusb-tegra210.c
@@ -994,6 +994,128 @@ static int tegra210_xusb_padctl_id_override(struct tegra_xusb_padctl *padctl,
 	return 0;
 }
 
+static void tegra210_usb2_bias_pad_power_on(struct tegra_xusb_usb2_pad *pad)
+{
+	struct tegra_xusb_padctl *padctl = pad->base.padctl;
+	u32 value;
+
+	if (pad->enable++ > 0)
+		return;
+
+	dev_dbg(padctl->dev, "power on BIAS PAD & USB2 tracking\n");
+
+	if (clk_prepare_enable(pad->clk))
+		dev_warn(padctl->dev, "failed to enable BIAS PAD & USB2 tracking\n");
+
+	value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
+	value &= ~((XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_START_TIMER_MASK <<
+		    XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_START_TIMER_SHIFT) |
+		   (XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_DONE_RESET_TIMER_MASK <<
+		    XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_DONE_RESET_TIMER_SHIFT));
+	value |= (XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_START_TIMER_VAL <<
+		  XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_START_TIMER_SHIFT) |
+		 (XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_DONE_RESET_TIMER_VAL <<
+		  XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_DONE_RESET_TIMER_SHIFT);
+	padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
+	value &= ~XUSB_PADCTL_USB2_BIAS_PAD_CTL0_PD;
+	padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
+
+	udelay(1);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
+	value &= ~XUSB_PADCTL_USB2_BIAS_PAD_CTL1_PD_TRK;
+	padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
+
+	udelay(50);
+}
+
+static void tegra210_usb2_bias_pad_power_off(struct tegra_xusb_usb2_pad *pad)
+{
+	struct tegra_xusb_padctl *padctl = pad->base.padctl;
+	u32 value;
+
+	if (WARN_ON(pad->enable == 0))
+		return;
+
+	if (--pad->enable > 0)
+		return;
+
+	dev_dbg(padctl->dev, "power off USB2 tracking\n");
+
+	value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
+	value |= XUSB_PADCTL_USB2_BIAS_PAD_CTL0_PD;
+	padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
+
+	clk_disable_unprepare(pad->clk);
+}
+
+/* must be called under padctl->lock */
+void tegra210_usb2_pad_power_on(struct phy *phy)
+{
+	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
+	struct tegra_xusb_usb2_lane *usb2 = to_usb2_lane(lane);
+	struct tegra_xusb_usb2_pad *pad = to_usb2_pad(lane->pad);
+	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
+	unsigned int index = lane->index;
+	u32 value;
+
+	if (!phy)
+		return;
+
+	if (usb2->powered_on)
+		return;
+
+	dev_info(padctl->dev, "power on UTMI pads %d\n", index);
+
+	tegra210_usb2_bias_pad_power_on(pad);
+
+	udelay(2);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
+	value &= ~XUSB_PADCTL_USB2_OTG_PAD_CTL0_PD;
+	padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
+
+	value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
+	value &= ~XUSB_PADCTL_USB2_OTG_PAD_CTL1_PD_DR;
+	padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
+
+	usb2->powered_on = true;
+}
+
+/* must be called under padctl->lock */
+void tegra210_usb2_pad_power_down(struct phy *phy)
+{
+	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
+	struct tegra_xusb_usb2_lane *usb2 = to_usb2_lane(lane);
+	struct tegra_xusb_usb2_pad *pad = to_usb2_pad(lane->pad);
+	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
+	unsigned int index = lane->index;
+	u32 value;
+
+	if (!phy)
+		return;
+
+	if (!usb2->powered_on)
+		return;
+
+	dev_info(padctl->dev, "power down UTMI pad %d\n", index);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
+	value |= XUSB_PADCTL_USB2_OTG_PAD_CTL0_PD;
+	padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
+
+	value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
+	value |= XUSB_PADCTL_USB2_OTG_PAD_CTL1_PD_DR;
+	padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
+
+	udelay(2);
+
+	tegra210_usb2_bias_pad_power_off(pad);
+	usb2->powered_on = false;
+}
+
 static int tegra210_usb2_phy_set_mode(struct phy *phy, enum phy_mode mode,
 				      int submode)
 {
@@ -1037,7 +1159,6 @@ static int tegra210_usb2_phy_power_on(struct phy *phy)
 {
 	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
 	struct tegra_xusb_usb2_lane *usb2 = to_usb2_lane(lane);
-	struct tegra_xusb_usb2_pad *pad = to_usb2_pad(lane->pad);
 	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
 	struct tegra210_xusb_padctl *priv;
 	struct tegra_xusb_usb2_port *port;
@@ -1053,6 +1174,8 @@ static int tegra210_usb2_phy_power_on(struct phy *phy)
 
 	priv = to_tegra210_xusb_padctl(padctl);
 
+	mutex_lock(&padctl->lock);
+
 	if (port->usb3_port_fake != -1) {
 		value = padctl_readl(padctl, XUSB_PADCTL_SS_PORT_MAP);
 		value &= ~XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP_MASK(
@@ -1148,62 +1271,21 @@ static int tegra210_usb2_phy_power_on(struct phy *phy)
 
 	if (port->supply && port->mode == USB_DR_MODE_HOST) {
 		err = regulator_enable(port->supply);
-		if (err)
+		if (err) {
+			mutex_unlock(&padctl->lock);
 			return err;
+		}
 	}
 
-	mutex_lock(&padctl->lock);
-
-	if (pad->enable > 0) {
-		pad->enable++;
-		mutex_unlock(&padctl->lock);
-		return 0;
-	}
-
-	err = clk_prepare_enable(pad->clk);
-	if (err)
-		goto disable_regulator;
+	tegra210_usb2_pad_power_on(phy);
 
-	value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
-	value &= ~((XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_START_TIMER_MASK <<
-		    XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_START_TIMER_SHIFT) |
-		   (XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_DONE_RESET_TIMER_MASK <<
-		    XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_DONE_RESET_TIMER_SHIFT));
-	value |= (XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_START_TIMER_VAL <<
-		  XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_START_TIMER_SHIFT) |
-		 (XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_DONE_RESET_TIMER_VAL <<
-		  XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_DONE_RESET_TIMER_SHIFT);
-	padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
-
-	value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
-	value &= ~XUSB_PADCTL_USB2_BIAS_PAD_CTL0_PD;
-	padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
-
-	udelay(1);
-
-	value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
-	value &= ~XUSB_PADCTL_USB2_BIAS_PAD_CTL1_PD_TRK;
-	padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
-
-	udelay(50);
-
-	clk_disable_unprepare(pad->clk);
-
-	pad->enable++;
 	mutex_unlock(&padctl->lock);
-
 	return 0;
-
-disable_regulator:
-	regulator_disable(port->supply);
-	mutex_unlock(&padctl->lock);
-	return err;
 }
 
 static int tegra210_usb2_phy_power_off(struct phy *phy)
 {
 	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
-	struct tegra_xusb_usb2_pad *pad = to_usb2_pad(lane->pad);
 	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
 	struct tegra_xusb_usb2_port *port;
 	u32 value;
@@ -1217,6 +1299,8 @@ static int tegra210_usb2_phy_power_off(struct phy *phy)
 
 	mutex_lock(&padctl->lock);
 
+	tegra210_usb2_pad_power_down(phy);
+
 	if (port->usb3_port_fake != -1) {
 		value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
 		value |= XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_CLAMP_EN_EARLY(
@@ -1243,18 +1327,8 @@ static int tegra210_usb2_phy_power_off(struct phy *phy)
 		padctl_writel(padctl, value, XUSB_PADCTL_SS_PORT_MAP);
 	}
 
-	if (WARN_ON(pad->enable == 0))
-		goto out;
-
-	if (--pad->enable > 0)
-		goto out;
-
-	value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
-	value |= XUSB_PADCTL_USB2_BIAS_PAD_CTL0_PD;
-	padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
-
-out:
 	regulator_disable(port->supply);
+
 	mutex_unlock(&padctl->lock);
 	return 0;
 }
@@ -2215,6 +2289,8 @@ static const struct tegra_xusb_padctl_ops tegra210_xusb_padctl_ops = {
 	.hsic_set_idle = tegra210_hsic_set_idle,
 	.vbus_override = tegra210_xusb_padctl_vbus_override,
 	.utmi_port_reset = tegra210_utmi_port_reset,
+	.utmi_pad_power_on = tegra210_usb2_pad_power_on,
+	.utmi_pad_power_down = tegra210_usb2_pad_power_down,
 };
 
 static const char * const tegra210_xusb_padctl_supply_names[] = {
-- 
2.7.4

[PATCH V3 4/8] phy: tegra: xusb: Add USB2 pad power control support for Tegra210

[Nagarjuna Kristam]

Add USB2 pad power on and off API's for TEgra210 and provide its control
via soc ops. It can be used by operations like charger detect to power on
and off USB2 pad if needed.

Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
---
V3:
 - Added Acked-by updates to commit message.
---
V2:
 - Patch re-based.
---
 drivers/phy/tegra/xusb-tegra210.c | 190 ++++++++++++++++++++++++++------------
 1 file changed, 133 insertions(+), 57 deletions(-)

diff --git a/drivers/phy/tegra/xusb-tegra210.c b/drivers/phy/tegra/xusb-tegra210.c
index 66bd461..caf0890 100644
--- a/drivers/phy/tegra/xusb-tegra210.c
+++ b/drivers/phy/tegra/xusb-tegra210.c
@@ -994,6 +994,128 @@ static int tegra210_xusb_padctl_id_override(struct tegra_xusb_padctl *padctl,
 	return 0;
 }
 
+static void tegra210_usb2_bias_pad_power_on(struct tegra_xusb_usb2_pad *pad)
+{
+	struct tegra_xusb_padctl *padctl = pad->base.padctl;
+	u32 value;
+
+	if (pad->enable++ > 0)
+		return;
+
+	dev_dbg(padctl->dev, "power on BIAS PAD & USB2 tracking\n");
+
+	if (clk_prepare_enable(pad->clk))
+		dev_warn(padctl->dev, "failed to enable BIAS PAD & USB2 tracking\n");
+
+	value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
+	value &= ~((XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_START_TIMER_MASK <<
+		    XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_START_TIMER_SHIFT) |
+		   (XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_DONE_RESET_TIMER_MASK <<
+		    XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_DONE_RESET_TIMER_SHIFT));
+	value |= (XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_START_TIMER_VAL <<
+		  XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_START_TIMER_SHIFT) |
+		 (XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_DONE_RESET_TIMER_VAL <<
+		  XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_DONE_RESET_TIMER_SHIFT);
+	padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
+	value &= ~XUSB_PADCTL_USB2_BIAS_PAD_CTL0_PD;
+	padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
+
+	udelay(1);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
+	value &= ~XUSB_PADCTL_USB2_BIAS_PAD_CTL1_PD_TRK;
+	padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
+
+	udelay(50);
+}
+
+static void tegra210_usb2_bias_pad_power_off(struct tegra_xusb_usb2_pad *pad)
+{
+	struct tegra_xusb_padctl *padctl = pad->base.padctl;
+	u32 value;
+
+	if (WARN_ON(pad->enable == 0))
+		return;
+
+	if (--pad->enable > 0)
+		return;
+
+	dev_dbg(padctl->dev, "power off USB2 tracking\n");
+
+	value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
+	value |= XUSB_PADCTL_USB2_BIAS_PAD_CTL0_PD;
+	padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
+
+	clk_disable_unprepare(pad->clk);
+}
+
+/* must be called under padctl->lock */
+void tegra210_usb2_pad_power_on(struct phy *phy)
+{
+	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
+	struct tegra_xusb_usb2_lane *usb2 = to_usb2_lane(lane);
+	struct tegra_xusb_usb2_pad *pad = to_usb2_pad(lane->pad);
+	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
+	unsigned int index = lane->index;
+	u32 value;
+
+	if (!phy)
+		return;
+
+	if (usb2->powered_on)
+		return;
+
+	dev_info(padctl->dev, "power on UTMI pads %d\n", index);
+
+	tegra210_usb2_bias_pad_power_on(pad);
+
+	udelay(2);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
+	value &= ~XUSB_PADCTL_USB2_OTG_PAD_CTL0_PD;
+	padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
+
+	value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
+	value &= ~XUSB_PADCTL_USB2_OTG_PAD_CTL1_PD_DR;
+	padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
+
+	usb2->powered_on = true;
+}
+
+/* must be called under padctl->lock */
+void tegra210_usb2_pad_power_down(struct phy *phy)
+{
+	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
+	struct tegra_xusb_usb2_lane *usb2 = to_usb2_lane(lane);
+	struct tegra_xusb_usb2_pad *pad = to_usb2_pad(lane->pad);
+	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
+	unsigned int index = lane->index;
+	u32 value;
+
+	if (!phy)
+		return;
+
+	if (!usb2->powered_on)
+		return;
+
+	dev_info(padctl->dev, "power down UTMI pad %d\n", index);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
+	value |= XUSB_PADCTL_USB2_OTG_PAD_CTL0_PD;
+	padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
+
+	value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
+	value |= XUSB_PADCTL_USB2_OTG_PAD_CTL1_PD_DR;
+	padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
+
+	udelay(2);
+
+	tegra210_usb2_bias_pad_power_off(pad);
+	usb2->powered_on = false;
+}
+
 static int tegra210_usb2_phy_set_mode(struct phy *phy, enum phy_mode mode,
 				      int submode)
 {
@@ -1037,7 +1159,6 @@ static int tegra210_usb2_phy_power_on(struct phy *phy)
 {
 	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
 	struct tegra_xusb_usb2_lane *usb2 = to_usb2_lane(lane);
-	struct tegra_xusb_usb2_pad *pad = to_usb2_pad(lane->pad);
 	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
 	struct tegra210_xusb_padctl *priv;
 	struct tegra_xusb_usb2_port *port;
@@ -1053,6 +1174,8 @@ static int tegra210_usb2_phy_power_on(struct phy *phy)
 
 	priv = to_tegra210_xusb_padctl(padctl);
 
+	mutex_lock(&padctl->lock);
+
 	if (port->usb3_port_fake != -1) {
 		value = padctl_readl(padctl, XUSB_PADCTL_SS_PORT_MAP);
 		value &= ~XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP_MASK(
@@ -1148,62 +1271,21 @@ static int tegra210_usb2_phy_power_on(struct phy *phy)
 
 	if (port->supply && port->mode == USB_DR_MODE_HOST) {
 		err = regulator_enable(port->supply);
-		if (err)
+		if (err) {
+			mutex_unlock(&padctl->lock);
 			return err;
+		}
 	}
 
-	mutex_lock(&padctl->lock);
-
-	if (pad->enable > 0) {
-		pad->enable++;
-		mutex_unlock(&padctl->lock);
-		return 0;
-	}
-
-	err = clk_prepare_enable(pad->clk);
-	if (err)
-		goto disable_regulator;
+	tegra210_usb2_pad_power_on(phy);
 
-	value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
-	value &= ~((XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_START_TIMER_MASK <<
-		    XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_START_TIMER_SHIFT) |
-		   (XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_DONE_RESET_TIMER_MASK <<
-		    XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_DONE_RESET_TIMER_SHIFT));
-	value |= (XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_START_TIMER_VAL <<
-		  XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_START_TIMER_SHIFT) |
-		 (XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_DONE_RESET_TIMER_VAL <<
-		  XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_DONE_RESET_TIMER_SHIFT);
-	padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
-
-	value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
-	value &= ~XUSB_PADCTL_USB2_BIAS_PAD_CTL0_PD;
-	padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
-
-	udelay(1);
-
-	value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
-	value &= ~XUSB_PADCTL_USB2_BIAS_PAD_CTL1_PD_TRK;
-	padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
-
-	udelay(50);
-
-	clk_disable_unprepare(pad->clk);
-
-	pad->enable++;
 	mutex_unlock(&padctl->lock);
-
 	return 0;
-
-disable_regulator:
-	regulator_disable(port->supply);
-	mutex_unlock(&padctl->lock);
-	return err;
 }
 
 static int tegra210_usb2_phy_power_off(struct phy *phy)
 {
 	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
-	struct tegra_xusb_usb2_pad *pad = to_usb2_pad(lane->pad);
 	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
 	struct tegra_xusb_usb2_port *port;
 	u32 value;
@@ -1217,6 +1299,8 @@ static int tegra210_usb2_phy_power_off(struct phy *phy)
 
 	mutex_lock(&padctl->lock);
 
+	tegra210_usb2_pad_power_down(phy);
+
 	if (port->usb3_port_fake != -1) {
 		value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
 		value |= XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_CLAMP_EN_EARLY(
@@ -1243,18 +1327,8 @@ static int tegra210_usb2_phy_power_off(struct phy *phy)
 		padctl_writel(padctl, value, XUSB_PADCTL_SS_PORT_MAP);
 	}
 
-	if (WARN_ON(pad->enable == 0))
-		goto out;
-
-	if (--pad->enable > 0)
-		goto out;
-
-	value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
-	value |= XUSB_PADCTL_USB2_BIAS_PAD_CTL0_PD;
-	padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
-
-out:
 	regulator_disable(port->supply);
+
 	mutex_unlock(&padctl->lock);
 	return 0;
 }
@@ -2215,6 +2289,8 @@ static const struct tegra_xusb_padctl_ops tegra210_xusb_padctl_ops = {
 	.hsic_set_idle = tegra210_hsic_set_idle,
 	.vbus_override = tegra210_xusb_padctl_vbus_override,
 	.utmi_port_reset = tegra210_utmi_port_reset,
+	.utmi_pad_power_on = tegra210_usb2_pad_power_on,
+	.utmi_pad_power_down = tegra210_usb2_pad_power_down,
 };
 
 static const char * const tegra210_xusb_padctl_supply_names[] = {
-- 
2.7.4

[PATCH V3 5/8] phy: tegra: xusb: Add soc ops API to enable UTMI PAD protection

[Nagarjuna Kristam]

When USB charger is enabled, UTMI PAD needs to be protected according
to the direction and current level. Add support for the same on Tegra210
and Tegra186.

Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
---
V3:
 - Alligned function and its arguments.
 - Fixed other comments from Thierry.
---
V2:
 - Commit message coorected.
 - Patch re-based.
---
 drivers/phy/tegra/xusb-tegra186.c | 40 +++++++++++++++++++++++++++++++++++++++
 drivers/phy/tegra/xusb-tegra210.c | 32 +++++++++++++++++++++++++++++++
 drivers/phy/tegra/xusb.h          | 13 +++++++++++++
 3 files changed, 85 insertions(+)

diff --git a/drivers/phy/tegra/xusb-tegra186.c b/drivers/phy/tegra/xusb-tegra186.c
index f862254..59b78a7 100644
--- a/drivers/phy/tegra/xusb-tegra186.c
+++ b/drivers/phy/tegra/xusb-tegra186.c
@@ -68,6 +68,13 @@
 #define   PORTX_SPEED_SUPPORT_MASK		(0x3)
 #define     PORT_SPEED_SUPPORT_GEN1		(0x0)
 
+#define USB2_BATTERY_CHRG_OTGPADX_CTL1(x)       (0x84 + (x) * 0x40)
+#define  PD_VREG                                (1 << 6)
+#define  VREG_LEV(x)                            (((x) & 0x3) << 7)
+#define  VREG_DIR(x)                            (((x) & 0x3) << 11)
+#define  VREG_DIR_IN                            VREG_DIR(1)
+#define  VREG_DIR_OUT                           VREG_DIR(2)
+
 #define XUSB_PADCTL_USB2_OTG_PADX_CTL0(x)	(0x88 + (x) * 0x40)
 #define  HS_CURR_LEVEL(x)			((x) & 0x3f)
 #define  TERM_SEL				BIT(25)
@@ -289,6 +296,37 @@ static void tegra_phy_xusb_utmi_pad_power_down(struct phy *phy)
 	usb2->powered_on = false;
 }
 
+static void
+tegra186_xusb_padctl_utmi_pad_set_protection(struct tegra_xusb_port *port,
+					     int level,
+					     enum tegra_vbus_dir dir)
+{
+	u32 value;
+	struct tegra_xusb_padctl *padctl = port->padctl;
+	unsigned int index = port->index;
+
+	value = padctl_readl(padctl, USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
+
+	if (level < 0) {
+		/* disable pad protection */
+		value |= PD_VREG;
+		value &= ~VREG_LEV(~0);
+		value &= ~VREG_DIR(~0);
+	} else {
+		if (dir == TEGRA_VBUS_SOURCE)
+			value |= VREG_DIR_OUT;
+		else if (dir == TEGRA_VBUS_SINK)
+			value |= VREG_DIR_IN;
+
+		value &= ~PD_VREG;
+		value &= ~VREG_DIR(~0);
+		value &= ~VREG_LEV(~0);
+		value |= VREG_LEV(level);
+	}
+
+	padctl_writel(padctl, value, USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
+}
+
 static int tegra186_xusb_padctl_vbus_override(struct tegra_xusb_padctl *padctl,
 					       bool status)
 {
@@ -935,6 +973,8 @@ static const struct tegra_xusb_padctl_ops tegra186_xusb_padctl_ops = {
 	.vbus_override = tegra186_xusb_padctl_vbus_override,
 	.utmi_pad_power_on = tegra_phy_xusb_utmi_pad_power_on,
 	.utmi_pad_power_down = tegra_phy_xusb_utmi_pad_power_down,
+	.utmi_pad_set_protection =
+			tegra186_xusb_padctl_utmi_pad_set_protection,
 };
 
 #if IS_ENABLED(CONFIG_ARCH_TEGRA_186_SOC)
diff --git a/drivers/phy/tegra/xusb-tegra210.c b/drivers/phy/tegra/xusb-tegra210.c
index caf0890..80c4349 100644
--- a/drivers/phy/tegra/xusb-tegra210.c
+++ b/drivers/phy/tegra/xusb-tegra210.c
@@ -74,6 +74,8 @@
 #define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_MASK 0x3
 #define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_VAL 0x1
 #define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_FIX18 (1 << 6)
+#define USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV(x) (((x) & 0x3) << 7)
+#define USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_DIR(x) (((x) & 0x3) << 11)
 
 #define XUSB_PADCTL_USB2_OTG_PADX_CTL0(x) (0x088 + (x) * 0x40)
 #define XUSB_PADCTL_USB2_OTG_PAD_CTL0_PD_ZI (1 << 29)
@@ -1116,6 +1118,34 @@ void tegra210_usb2_pad_power_down(struct phy *phy)
 	usb2->powered_on = false;
 }
 
+static void
+tegra210_xusb_padctl_utmi_pad_set_protection(struct tegra_xusb_port *port,
+					     int level,
+					     enum tegra_vbus_dir dir)
+{
+	u32 value;
+	struct tegra_xusb_padctl *padctl = port->padctl;
+	unsigned int index = port->index;
+
+	value = padctl_readl(padctl,
+			     XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
+
+	if (level < 0) {
+		/* disable pad protection */
+		value |= XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_FIX18;
+		value &= USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV(~0);
+		value &= ~USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_DIR(~0);
+	} else {
+		value &= ~XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_FIX18;
+		value &= ~USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_DIR(~0);
+		value &= USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV(~0);
+		value |= USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV(level);
+	}
+
+	padctl_writel(padctl, value,
+		      XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
+}
+
 static int tegra210_usb2_phy_set_mode(struct phy *phy, enum phy_mode mode,
 				      int submode)
 {
@@ -2291,6 +2321,8 @@ static const struct tegra_xusb_padctl_ops tegra210_xusb_padctl_ops = {
 	.utmi_port_reset = tegra210_utmi_port_reset,
 	.utmi_pad_power_on = tegra210_usb2_pad_power_on,
 	.utmi_pad_power_down = tegra210_usb2_pad_power_down,
+	.utmi_pad_set_protection =
+			tegra210_xusb_padctl_utmi_pad_set_protection,
 };
 
 static const char * const tegra210_xusb_padctl_supply_names[] = {
diff --git a/drivers/phy/tegra/xusb.h b/drivers/phy/tegra/xusb.h
index 6995fc4..475bcc6 100644
--- a/drivers/phy/tegra/xusb.h
+++ b/drivers/phy/tegra/xusb.h
@@ -259,6 +259,17 @@ to_sata_pad(struct tegra_xusb_pad *pad)
  */
 struct tegra_xusb_port_ops;
 
+/*
+ * Tegra OTG port VBUS direction:
+ * default (based on port capability) or
+ * as source or sink
+ */
+enum tegra_vbus_dir {
+	TEGRA_VBUS_DEFAULT,
+	TEGRA_VBUS_SOURCE,
+	TEGRA_VBUS_SINK
+};
+
 struct tegra_xusb_port {
 	struct tegra_xusb_padctl *padctl;
 	struct tegra_xusb_lane *lane;
@@ -398,6 +409,8 @@ struct tegra_xusb_padctl_ops {
 	int (*utmi_port_reset)(struct phy *phy);
 	void (*utmi_pad_power_on)(struct phy *phy);
 	void (*utmi_pad_power_down)(struct phy *phy);
+	void (*utmi_pad_set_protection)(struct tegra_xusb_port *port,
+					int level, enum tegra_vbus_dir dir);
 };
 
 struct tegra_xusb_padctl_soc {
-- 
2.7.4

[PATCH V3 5/8] phy: tegra: xusb: Add soc ops API to enable UTMI PAD protection

[Nagarjuna Kristam]

When USB charger is enabled, UTMI PAD needs to be protected according
to the direction and current level. Add support for the same on Tegra210
and Tegra186.

Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
---
V3:
 - Alligned function and its arguments.
 - Fixed other comments from Thierry.
---
V2:
 - Commit message coorected.
 - Patch re-based.
---
 drivers/phy/tegra/xusb-tegra186.c | 40 +++++++++++++++++++++++++++++++++++++++
 drivers/phy/tegra/xusb-tegra210.c | 32 +++++++++++++++++++++++++++++++
 drivers/phy/tegra/xusb.h          | 13 +++++++++++++
 3 files changed, 85 insertions(+)

diff --git a/drivers/phy/tegra/xusb-tegra186.c b/drivers/phy/tegra/xusb-tegra186.c
index f862254..59b78a7 100644
--- a/drivers/phy/tegra/xusb-tegra186.c
+++ b/drivers/phy/tegra/xusb-tegra186.c
@@ -68,6 +68,13 @@
 #define   PORTX_SPEED_SUPPORT_MASK		(0x3)
 #define     PORT_SPEED_SUPPORT_GEN1		(0x0)
 
+#define USB2_BATTERY_CHRG_OTGPADX_CTL1(x)       (0x84 + (x) * 0x40)
+#define  PD_VREG                                (1 << 6)
+#define  VREG_LEV(x)                            (((x) & 0x3) << 7)
+#define  VREG_DIR(x)                            (((x) & 0x3) << 11)
+#define  VREG_DIR_IN                            VREG_DIR(1)
+#define  VREG_DIR_OUT                           VREG_DIR(2)
+
 #define XUSB_PADCTL_USB2_OTG_PADX_CTL0(x)	(0x88 + (x) * 0x40)
 #define  HS_CURR_LEVEL(x)			((x) & 0x3f)
 #define  TERM_SEL				BIT(25)
@@ -289,6 +296,37 @@ static void tegra_phy_xusb_utmi_pad_power_down(struct phy *phy)
 	usb2->powered_on = false;
 }
 
+static void
+tegra186_xusb_padctl_utmi_pad_set_protection(struct tegra_xusb_port *port,
+					     int level,
+					     enum tegra_vbus_dir dir)
+{
+	u32 value;
+	struct tegra_xusb_padctl *padctl = port->padctl;
+	unsigned int index = port->index;
+
+	value = padctl_readl(padctl, USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
+
+	if (level < 0) {
+		/* disable pad protection */
+		value |= PD_VREG;
+		value &= ~VREG_LEV(~0);
+		value &= ~VREG_DIR(~0);
+	} else {
+		if (dir == TEGRA_VBUS_SOURCE)
+			value |= VREG_DIR_OUT;
+		else if (dir == TEGRA_VBUS_SINK)
+			value |= VREG_DIR_IN;
+
+		value &= ~PD_VREG;
+		value &= ~VREG_DIR(~0);
+		value &= ~VREG_LEV(~0);
+		value |= VREG_LEV(level);
+	}
+
+	padctl_writel(padctl, value, USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
+}
+
 static int tegra186_xusb_padctl_vbus_override(struct tegra_xusb_padctl *padctl,
 					       bool status)
 {
@@ -935,6 +973,8 @@ static const struct tegra_xusb_padctl_ops tegra186_xusb_padctl_ops = {
 	.vbus_override = tegra186_xusb_padctl_vbus_override,
 	.utmi_pad_power_on = tegra_phy_xusb_utmi_pad_power_on,
 	.utmi_pad_power_down = tegra_phy_xusb_utmi_pad_power_down,
+	.utmi_pad_set_protection =
+			tegra186_xusb_padctl_utmi_pad_set_protection,
 };
 
 #if IS_ENABLED(CONFIG_ARCH_TEGRA_186_SOC)
diff --git a/drivers/phy/tegra/xusb-tegra210.c b/drivers/phy/tegra/xusb-tegra210.c
index caf0890..80c4349 100644
--- a/drivers/phy/tegra/xusb-tegra210.c
+++ b/drivers/phy/tegra/xusb-tegra210.c
@@ -74,6 +74,8 @@
 #define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_MASK 0x3
 #define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_VAL 0x1
 #define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_FIX18 (1 << 6)
+#define USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV(x) (((x) & 0x3) << 7)
+#define USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_DIR(x) (((x) & 0x3) << 11)
 
 #define XUSB_PADCTL_USB2_OTG_PADX_CTL0(x) (0x088 + (x) * 0x40)
 #define XUSB_PADCTL_USB2_OTG_PAD_CTL0_PD_ZI (1 << 29)
@@ -1116,6 +1118,34 @@ void tegra210_usb2_pad_power_down(struct phy *phy)
 	usb2->powered_on = false;
 }
 
+static void
+tegra210_xusb_padctl_utmi_pad_set_protection(struct tegra_xusb_port *port,
+					     int level,
+					     enum tegra_vbus_dir dir)
+{
+	u32 value;
+	struct tegra_xusb_padctl *padctl = port->padctl;
+	unsigned int index = port->index;
+
+	value = padctl_readl(padctl,
+			     XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
+
+	if (level < 0) {
+		/* disable pad protection */
+		value |= XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_FIX18;
+		value &= USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV(~0);
+		value &= ~USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_DIR(~0);
+	} else {
+		value &= ~XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_FIX18;
+		value &= ~USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_DIR(~0);
+		value &= USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV(~0);
+		value |= USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV(level);
+	}
+
+	padctl_writel(padctl, value,
+		      XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
+}
+
 static int tegra210_usb2_phy_set_mode(struct phy *phy, enum phy_mode mode,
 				      int submode)
 {
@@ -2291,6 +2321,8 @@ static const struct tegra_xusb_padctl_ops tegra210_xusb_padctl_ops = {
 	.utmi_port_reset = tegra210_utmi_port_reset,
 	.utmi_pad_power_on = tegra210_usb2_pad_power_on,
 	.utmi_pad_power_down = tegra210_usb2_pad_power_down,
+	.utmi_pad_set_protection =
+			tegra210_xusb_padctl_utmi_pad_set_protection,
 };
 
 static const char * const tegra210_xusb_padctl_supply_names[] = {
diff --git a/drivers/phy/tegra/xusb.h b/drivers/phy/tegra/xusb.h
index 6995fc4..475bcc6 100644
--- a/drivers/phy/tegra/xusb.h
+++ b/drivers/phy/tegra/xusb.h
@@ -259,6 +259,17 @@ to_sata_pad(struct tegra_xusb_pad *pad)
  */
 struct tegra_xusb_port_ops;
 
+/*
+ * Tegra OTG port VBUS direction:
+ * default (based on port capability) or
+ * as source or sink
+ */
+enum tegra_vbus_dir {
+	TEGRA_VBUS_DEFAULT,
+	TEGRA_VBUS_SOURCE,
+	TEGRA_VBUS_SINK
+};
+
 struct tegra_xusb_port {
 	struct tegra_xusb_padctl *padctl;
 	struct tegra_xusb_lane *lane;
@@ -398,6 +409,8 @@ struct tegra_xusb_padctl_ops {
 	int (*utmi_port_reset)(struct phy *phy);
 	void (*utmi_pad_power_on)(struct phy *phy);
 	void (*utmi_pad_power_down)(struct phy *phy);
+	void (*utmi_pad_set_protection)(struct tegra_xusb_port *port,
+					int level, enum tegra_vbus_dir dir);
 };
 
 struct tegra_xusb_padctl_soc {
-- 
2.7.4

Re: [PATCH V3 5/8] phy: tegra: xusb: Add soc ops API to enable UTMI PAD protection

[Kishon Vijay Abraham I]

Thierry,

On 5/14/2020 11:52 AM, Nagarjuna Kristam wrote:
> When USB charger is enabled, UTMI PAD needs to be protected according
> to the direction and current level. Add support for the same on Tegra210
> and Tegra186.
> 
> Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>

Can you give your Acked by for pending patches in this series?

Thanks
Kishon
> ---
> V3:
>  - Alligned function and its arguments.
>  - Fixed other comments from Thierry.
> ---
> V2:
>  - Commit message coorected.
>  - Patch re-based.
> ---
>  drivers/phy/tegra/xusb-tegra186.c | 40 +++++++++++++++++++++++++++++++++++++++
>  drivers/phy/tegra/xusb-tegra210.c | 32 +++++++++++++++++++++++++++++++
>  drivers/phy/tegra/xusb.h          | 13 +++++++++++++
>  3 files changed, 85 insertions(+)
> 
> diff --git a/drivers/phy/tegra/xusb-tegra186.c b/drivers/phy/tegra/xusb-tegra186.c
> index f862254..59b78a7 100644
> --- a/drivers/phy/tegra/xusb-tegra186.c
> +++ b/drivers/phy/tegra/xusb-tegra186.c
> @@ -68,6 +68,13 @@
>  #define   PORTX_SPEED_SUPPORT_MASK		(0x3)
>  #define     PORT_SPEED_SUPPORT_GEN1		(0x0)
>  
> +#define USB2_BATTERY_CHRG_OTGPADX_CTL1(x)       (0x84 + (x) * 0x40)
> +#define  PD_VREG                                (1 << 6)
> +#define  VREG_LEV(x)                            (((x) & 0x3) << 7)
> +#define  VREG_DIR(x)                            (((x) & 0x3) << 11)
> +#define  VREG_DIR_IN                            VREG_DIR(1)
> +#define  VREG_DIR_OUT                           VREG_DIR(2)
> +
>  #define XUSB_PADCTL_USB2_OTG_PADX_CTL0(x)	(0x88 + (x) * 0x40)
>  #define  HS_CURR_LEVEL(x)			((x) & 0x3f)
>  #define  TERM_SEL				BIT(25)
> @@ -289,6 +296,37 @@ static void tegra_phy_xusb_utmi_pad_power_down(struct phy *phy)
>  	usb2->powered_on = false;
>  }
>  
> +static void
> +tegra186_xusb_padctl_utmi_pad_set_protection(struct tegra_xusb_port *port,
> +					     int level,
> +					     enum tegra_vbus_dir dir)
> +{
> +	u32 value;
> +	struct tegra_xusb_padctl *padctl = port->padctl;
> +	unsigned int index = port->index;
> +
> +	value = padctl_readl(padctl, USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
> +
> +	if (level < 0) {
> +		/* disable pad protection */
> +		value |= PD_VREG;
> +		value &= ~VREG_LEV(~0);
> +		value &= ~VREG_DIR(~0);
> +	} else {
> +		if (dir == TEGRA_VBUS_SOURCE)
> +			value |= VREG_DIR_OUT;
> +		else if (dir == TEGRA_VBUS_SINK)
> +			value |= VREG_DIR_IN;
> +
> +		value &= ~PD_VREG;
> +		value &= ~VREG_DIR(~0);
> +		value &= ~VREG_LEV(~0);
> +		value |= VREG_LEV(level);
> +	}
> +
> +	padctl_writel(padctl, value, USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
> +}
> +
>  static int tegra186_xusb_padctl_vbus_override(struct tegra_xusb_padctl *padctl,
>  					       bool status)
>  {
> @@ -935,6 +973,8 @@ static const struct tegra_xusb_padctl_ops tegra186_xusb_padctl_ops = {
>  	.vbus_override = tegra186_xusb_padctl_vbus_override,
>  	.utmi_pad_power_on = tegra_phy_xusb_utmi_pad_power_on,
>  	.utmi_pad_power_down = tegra_phy_xusb_utmi_pad_power_down,
> +	.utmi_pad_set_protection =
> +			tegra186_xusb_padctl_utmi_pad_set_protection,
>  };
>  
>  #if IS_ENABLED(CONFIG_ARCH_TEGRA_186_SOC)
> diff --git a/drivers/phy/tegra/xusb-tegra210.c b/drivers/phy/tegra/xusb-tegra210.c
> index caf0890..80c4349 100644
> --- a/drivers/phy/tegra/xusb-tegra210.c
> +++ b/drivers/phy/tegra/xusb-tegra210.c
> @@ -74,6 +74,8 @@
>  #define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_MASK 0x3
>  #define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_VAL 0x1
>  #define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_FIX18 (1 << 6)
> +#define USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV(x) (((x) & 0x3) << 7)
> +#define USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_DIR(x) (((x) & 0x3) << 11)
>  
>  #define XUSB_PADCTL_USB2_OTG_PADX_CTL0(x) (0x088 + (x) * 0x40)
>  #define XUSB_PADCTL_USB2_OTG_PAD_CTL0_PD_ZI (1 << 29)
> @@ -1116,6 +1118,34 @@ void tegra210_usb2_pad_power_down(struct phy *phy)
>  	usb2->powered_on = false;
>  }
>  
> +static void
> +tegra210_xusb_padctl_utmi_pad_set_protection(struct tegra_xusb_port *port,
> +					     int level,
> +					     enum tegra_vbus_dir dir)
> +{
> +	u32 value;
> +	struct tegra_xusb_padctl *padctl = port->padctl;
> +	unsigned int index = port->index;
> +
> +	value = padctl_readl(padctl,
> +			     XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
> +
> +	if (level < 0) {
> +		/* disable pad protection */
> +		value |= XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_FIX18;
> +		value &= USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV(~0);
> +		value &= ~USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_DIR(~0);
> +	} else {
> +		value &= ~XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_FIX18;
> +		value &= ~USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_DIR(~0);
> +		value &= USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV(~0);
> +		value |= USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV(level);
> +	}
> +
> +	padctl_writel(padctl, value,
> +		      XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
> +}
> +
>  static int tegra210_usb2_phy_set_mode(struct phy *phy, enum phy_mode mode,
>  				      int submode)
>  {
> @@ -2291,6 +2321,8 @@ static const struct tegra_xusb_padctl_ops tegra210_xusb_padctl_ops = {
>  	.utmi_port_reset = tegra210_utmi_port_reset,
>  	.utmi_pad_power_on = tegra210_usb2_pad_power_on,
>  	.utmi_pad_power_down = tegra210_usb2_pad_power_down,
> +	.utmi_pad_set_protection =
> +			tegra210_xusb_padctl_utmi_pad_set_protection,
>  };
>  
>  static const char * const tegra210_xusb_padctl_supply_names[] = {
> diff --git a/drivers/phy/tegra/xusb.h b/drivers/phy/tegra/xusb.h
> index 6995fc4..475bcc6 100644
> --- a/drivers/phy/tegra/xusb.h
> +++ b/drivers/phy/tegra/xusb.h
> @@ -259,6 +259,17 @@ to_sata_pad(struct tegra_xusb_pad *pad)
>   */
>  struct tegra_xusb_port_ops;
>  
> +/*
> + * Tegra OTG port VBUS direction:
> + * default (based on port capability) or
> + * as source or sink
> + */
> +enum tegra_vbus_dir {
> +	TEGRA_VBUS_DEFAULT,
> +	TEGRA_VBUS_SOURCE,
> +	TEGRA_VBUS_SINK
> +};
> +
>  struct tegra_xusb_port {
>  	struct tegra_xusb_padctl *padctl;
>  	struct tegra_xusb_lane *lane;
> @@ -398,6 +409,8 @@ struct tegra_xusb_padctl_ops {
>  	int (*utmi_port_reset)(struct phy *phy);
>  	void (*utmi_pad_power_on)(struct phy *phy);
>  	void (*utmi_pad_power_down)(struct phy *phy);
> +	void (*utmi_pad_set_protection)(struct tegra_xusb_port *port,
> +					int level, enum tegra_vbus_dir dir);
>  };
>  
>  struct tegra_xusb_padctl_soc {
> 

Re: [PATCH V3 5/8] phy: tegra: xusb: Add soc ops API to enable UTMI PAD protection

[Kishon Vijay Abraham I]

Thierry,

On 5/14/2020 11:52 AM, Nagarjuna Kristam wrote:
> When USB charger is enabled, UTMI PAD needs to be protected according
> to the direction and current level. Add support for the same on Tegra210
> and Tegra186.
> 
> Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>

Can you give your Acked by for pending patches in this series?

Thanks
Kishon
> ---
> V3:
>  - Alligned function and its arguments.
>  - Fixed other comments from Thierry.
> ---
> V2:
>  - Commit message coorected.
>  - Patch re-based.
> ---
>  drivers/phy/tegra/xusb-tegra186.c | 40 +++++++++++++++++++++++++++++++++++++++
>  drivers/phy/tegra/xusb-tegra210.c | 32 +++++++++++++++++++++++++++++++
>  drivers/phy/tegra/xusb.h          | 13 +++++++++++++
>  3 files changed, 85 insertions(+)
> 
> diff --git a/drivers/phy/tegra/xusb-tegra186.c b/drivers/phy/tegra/xusb-tegra186.c
> index f862254..59b78a7 100644
> --- a/drivers/phy/tegra/xusb-tegra186.c
> +++ b/drivers/phy/tegra/xusb-tegra186.c
> @@ -68,6 +68,13 @@
>  #define   PORTX_SPEED_SUPPORT_MASK		(0x3)
>  #define     PORT_SPEED_SUPPORT_GEN1		(0x0)
>  
> +#define USB2_BATTERY_CHRG_OTGPADX_CTL1(x)       (0x84 + (x) * 0x40)
> +#define  PD_VREG                                (1 << 6)
> +#define  VREG_LEV(x)                            (((x) & 0x3) << 7)
> +#define  VREG_DIR(x)                            (((x) & 0x3) << 11)
> +#define  VREG_DIR_IN                            VREG_DIR(1)
> +#define  VREG_DIR_OUT                           VREG_DIR(2)
> +
>  #define XUSB_PADCTL_USB2_OTG_PADX_CTL0(x)	(0x88 + (x) * 0x40)
>  #define  HS_CURR_LEVEL(x)			((x) & 0x3f)
>  #define  TERM_SEL				BIT(25)
> @@ -289,6 +296,37 @@ static void tegra_phy_xusb_utmi_pad_power_down(struct phy *phy)
>  	usb2->powered_on = false;
>  }
>  
> +static void
> +tegra186_xusb_padctl_utmi_pad_set_protection(struct tegra_xusb_port *port,
> +					     int level,
> +					     enum tegra_vbus_dir dir)
> +{
> +	u32 value;
> +	struct tegra_xusb_padctl *padctl = port->padctl;
> +	unsigned int index = port->index;
> +
> +	value = padctl_readl(padctl, USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
> +
> +	if (level < 0) {
> +		/* disable pad protection */
> +		value |= PD_VREG;
> +		value &= ~VREG_LEV(~0);
> +		value &= ~VREG_DIR(~0);
> +	} else {
> +		if (dir == TEGRA_VBUS_SOURCE)
> +			value |= VREG_DIR_OUT;
> +		else if (dir == TEGRA_VBUS_SINK)
> +			value |= VREG_DIR_IN;
> +
> +		value &= ~PD_VREG;
> +		value &= ~VREG_DIR(~0);
> +		value &= ~VREG_LEV(~0);
> +		value |= VREG_LEV(level);
> +	}
> +
> +	padctl_writel(padctl, value, USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
> +}
> +
>  static int tegra186_xusb_padctl_vbus_override(struct tegra_xusb_padctl *padctl,
>  					       bool status)
>  {
> @@ -935,6 +973,8 @@ static const struct tegra_xusb_padctl_ops tegra186_xusb_padctl_ops = {
>  	.vbus_override = tegra186_xusb_padctl_vbus_override,
>  	.utmi_pad_power_on = tegra_phy_xusb_utmi_pad_power_on,
>  	.utmi_pad_power_down = tegra_phy_xusb_utmi_pad_power_down,
> +	.utmi_pad_set_protection =
> +			tegra186_xusb_padctl_utmi_pad_set_protection,
>  };
>  
>  #if IS_ENABLED(CONFIG_ARCH_TEGRA_186_SOC)
> diff --git a/drivers/phy/tegra/xusb-tegra210.c b/drivers/phy/tegra/xusb-tegra210.c
> index caf0890..80c4349 100644
> --- a/drivers/phy/tegra/xusb-tegra210.c
> +++ b/drivers/phy/tegra/xusb-tegra210.c
> @@ -74,6 +74,8 @@
>  #define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_MASK 0x3
>  #define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_VAL 0x1
>  #define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_FIX18 (1 << 6)
> +#define USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV(x) (((x) & 0x3) << 7)
> +#define USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_DIR(x) (((x) & 0x3) << 11)
>  
>  #define XUSB_PADCTL_USB2_OTG_PADX_CTL0(x) (0x088 + (x) * 0x40)
>  #define XUSB_PADCTL_USB2_OTG_PAD_CTL0_PD_ZI (1 << 29)
> @@ -1116,6 +1118,34 @@ void tegra210_usb2_pad_power_down(struct phy *phy)
>  	usb2->powered_on = false;
>  }
>  
> +static void
> +tegra210_xusb_padctl_utmi_pad_set_protection(struct tegra_xusb_port *port,
> +					     int level,
> +					     enum tegra_vbus_dir dir)
> +{
> +	u32 value;
> +	struct tegra_xusb_padctl *padctl = port->padctl;
> +	unsigned int index = port->index;
> +
> +	value = padctl_readl(padctl,
> +			     XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
> +
> +	if (level < 0) {
> +		/* disable pad protection */
> +		value |= XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_FIX18;
> +		value &= USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV(~0);
> +		value &= ~USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_DIR(~0);
> +	} else {
> +		value &= ~XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_FIX18;
> +		value &= ~USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_DIR(~0);
> +		value &= USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV(~0);
> +		value |= USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV(level);
> +	}
> +
> +	padctl_writel(padctl, value,
> +		      XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
> +}
> +
>  static int tegra210_usb2_phy_set_mode(struct phy *phy, enum phy_mode mode,
>  				      int submode)
>  {
> @@ -2291,6 +2321,8 @@ static const struct tegra_xusb_padctl_ops tegra210_xusb_padctl_ops = {
>  	.utmi_port_reset = tegra210_utmi_port_reset,
>  	.utmi_pad_power_on = tegra210_usb2_pad_power_on,
>  	.utmi_pad_power_down = tegra210_usb2_pad_power_down,
> +	.utmi_pad_set_protection =
> +			tegra210_xusb_padctl_utmi_pad_set_protection,
>  };
>  
>  static const char * const tegra210_xusb_padctl_supply_names[] = {
> diff --git a/drivers/phy/tegra/xusb.h b/drivers/phy/tegra/xusb.h
> index 6995fc4..475bcc6 100644
> --- a/drivers/phy/tegra/xusb.h
> +++ b/drivers/phy/tegra/xusb.h
> @@ -259,6 +259,17 @@ to_sata_pad(struct tegra_xusb_pad *pad)
>   */
>  struct tegra_xusb_port_ops;
>  
> +/*
> + * Tegra OTG port VBUS direction:
> + * default (based on port capability) or
> + * as source or sink
> + */
> +enum tegra_vbus_dir {
> +	TEGRA_VBUS_DEFAULT,
> +	TEGRA_VBUS_SOURCE,
> +	TEGRA_VBUS_SINK
> +};
> +
>  struct tegra_xusb_port {
>  	struct tegra_xusb_padctl *padctl;
>  	struct tegra_xusb_lane *lane;
> @@ -398,6 +409,8 @@ struct tegra_xusb_padctl_ops {
>  	int (*utmi_port_reset)(struct phy *phy);
>  	void (*utmi_pad_power_on)(struct phy *phy);
>  	void (*utmi_pad_power_down)(struct phy *phy);
> +	void (*utmi_pad_set_protection)(struct tegra_xusb_port *port,
> +					int level, enum tegra_vbus_dir dir);
>  };
>  
>  struct tegra_xusb_padctl_soc {
> 

Re: [PATCH V3 5/8] phy: tegra: xusb: Add soc ops API to enable UTMI PAD protection

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 623 bytes --]

On Mon, May 18, 2020 at 05:54:03PM +0530, Kishon Vijay Abraham I wrote:
> Thierry,
> 
> On 5/14/2020 11:52 AM, Nagarjuna Kristam wrote:
> > When USB charger is enabled, UTMI PAD needs to be protected according
> > to the direction and current level. Add support for the same on Tegra210
> > and Tegra186.
> > 
> > Signed-off-by: Nagarjuna Kristam <nkristam-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
> 
> Can you give your Acked by for pending patches in this series?

I went through these patches one more time and I think they're all good
now. I've acked the ones that didn't have my Acked-by yet.

Thierry

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH V3 5/8] phy: tegra: xusb: Add soc ops API to enable UTMI PAD protection

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 594 bytes --]

On Mon, May 18, 2020 at 05:54:03PM +0530, Kishon Vijay Abraham I wrote:
> Thierry,
> 
> On 5/14/2020 11:52 AM, Nagarjuna Kristam wrote:
> > When USB charger is enabled, UTMI PAD needs to be protected according
> > to the direction and current level. Add support for the same on Tegra210
> > and Tegra186.
> > 
> > Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
> 
> Can you give your Acked by for pending patches in this series?

I went through these patches one more time and I think they're all good
now. I've acked the ones that didn't have my Acked-by yet.

Thierry

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH V3 5/8] phy: tegra: xusb: Add soc ops API to enable UTMI PAD protection

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 771 bytes --]

On Thu, May 14, 2020 at 11:52:40AM +0530, Nagarjuna Kristam wrote:
> When USB charger is enabled, UTMI PAD needs to be protected according
> to the direction and current level. Add support for the same on Tegra210
> and Tegra186.
> 
> Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
> ---
> V3:
>  - Alligned function and its arguments.
>  - Fixed other comments from Thierry.
> ---
> V2:
>  - Commit message coorected.
>  - Patch re-based.
> ---
>  drivers/phy/tegra/xusb-tegra186.c | 40 +++++++++++++++++++++++++++++++++++++++
>  drivers/phy/tegra/xusb-tegra210.c | 32 +++++++++++++++++++++++++++++++
>  drivers/phy/tegra/xusb.h          | 13 +++++++++++++
>  3 files changed, 85 insertions(+)

Acked-by: Thierry Reding <treding@nvidia.com>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[PATCH V3 1/8] dt-bindings: phy: tegra-xusb: Add charger-detect property

[Nagarjuna Kristam]

Add nvidia,charger-detect boolean property for Tegra210 and Tegra186
platforms. This property is used to inform driver to perform charger
detection on corresponding USB 2 port.

Signed-off-by: Nagarjuna Kristam <nkristam-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Acked-by: Thierry Reding <treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
V3:
 - Added Acked-by updates to commit message.
---
V2:
 - Added Acked-by updates to commit message.
---
 Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt
index 38c5fa2..9b2d2dd 100644
--- a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt
+++ b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt
@@ -190,6 +190,10 @@ Required properties for OTG/Peripheral capable USB2 ports:
   and peripheral roles. Connector should be added as subnode.
   See usb/usb-conn-gpio.txt.
 
+Optional properties for OTG/Peripheral capable USB2 ports:
+- nvidia,charger-detect: A boolean property whose presence inform driver to
+  perform charger-detect activity.
+
 Optional properties:
 - nvidia,internal: A boolean property whose presence determines that a port
   is internal. In the absence of this property the port is considered to be
-- 
2.7.4

[PATCH V3 1/8] dt-bindings: phy: tegra-xusb: Add charger-detect property

[Nagarjuna Kristam]

Add nvidia,charger-detect boolean property for Tegra210 and Tegra186
platforms. This property is used to inform driver to perform charger
detection on corresponding USB 2 port.

Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Thierry Reding <treding@nvidia.com>
---
V3:
 - Added Acked-by updates to commit message.
---
V2:
 - Added Acked-by updates to commit message.
---
 Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt
index 38c5fa2..9b2d2dd 100644
--- a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt
+++ b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt
@@ -190,6 +190,10 @@ Required properties for OTG/Peripheral capable USB2 ports:
   and peripheral roles. Connector should be added as subnode.
   See usb/usb-conn-gpio.txt.
 
+Optional properties for OTG/Peripheral capable USB2 ports:
+- nvidia,charger-detect: A boolean property whose presence inform driver to
+  perform charger-detect activity.
+
 Optional properties:
 - nvidia,internal: A boolean property whose presence determines that a port
   is internal. In the absence of this property the port is considered to be
-- 
2.7.4

[PATCH V3 3/8] phy: tegra: xusb: Add support for UTMI pad power control

[Nagarjuna Kristam]

Add support for UTMI pad power on and off API's via soc ops. These API
can be used by operations like charger detect to power on and off UTMI
pad if needed. Update powered_on flag in the pad power control API's.

Signed-off-by: Nagarjuna Kristam <nkristam-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Acked-by: Thierry Reding <treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
V3:
 - Added Acked-by updates to commit message.
---
V2:
 - Patch re-based.
---
 drivers/phy/tegra/xusb-tegra186.c | 51 ++++++++++++++++++---------------------
 drivers/phy/tegra/xusb.h          |  2 ++
 2 files changed, 26 insertions(+), 27 deletions(-)

diff --git a/drivers/phy/tegra/xusb-tegra186.c b/drivers/phy/tegra/xusb-tegra186.c
index 5d64f69..f862254 100644
--- a/drivers/phy/tegra/xusb-tegra186.c
+++ b/drivers/phy/tegra/xusb-tegra186.c
@@ -192,12 +192,8 @@ static void tegra186_utmi_bias_pad_power_on(struct tegra_xusb_padctl *padctl)
 	u32 value;
 	int err;
 
-	mutex_lock(&padctl->lock);
-
-	if (priv->bias_pad_enable++ > 0) {
-		mutex_unlock(&padctl->lock);
+	if (priv->bias_pad_enable++ > 0)
 		return;
-	}
 
 	err = clk_prepare_enable(priv->usb2_trk_clk);
 	if (err < 0)
@@ -221,8 +217,6 @@ static void tegra186_utmi_bias_pad_power_on(struct tegra_xusb_padctl *padctl)
 	value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
 	value &= ~USB2_PD_TRK;
 	padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
-
-	mutex_unlock(&padctl->lock);
 }
 
 static void tegra186_utmi_bias_pad_power_off(struct tegra_xusb_padctl *padctl)
@@ -230,44 +224,29 @@ static void tegra186_utmi_bias_pad_power_off(struct tegra_xusb_padctl *padctl)
 	struct tegra186_xusb_padctl *priv = to_tegra186_xusb_padctl(padctl);
 	u32 value;
 
-	mutex_lock(&padctl->lock);
-
-	if (WARN_ON(priv->bias_pad_enable == 0)) {
-		mutex_unlock(&padctl->lock);
+	if (WARN_ON(priv->bias_pad_enable == 0))
 		return;
-	}
 
-	if (--priv->bias_pad_enable > 0) {
-		mutex_unlock(&padctl->lock);
+	if (--priv->bias_pad_enable > 0)
 		return;
-	}
 
 	value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
 	value |= USB2_PD_TRK;
 	padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
 
 	clk_disable_unprepare(priv->usb2_trk_clk);
-
-	mutex_unlock(&padctl->lock);
 }
 
 static void tegra_phy_xusb_utmi_pad_power_on(struct phy *phy)
 {
 	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
 	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
-	struct tegra_xusb_usb2_port *port;
-	struct device *dev = padctl->dev;
+	struct tegra_xusb_usb2_lane *usb2 = to_usb2_lane(lane);
 	unsigned int index = lane->index;
 	u32 value;
 
-	if (!phy)
-		return;
-
-	port = tegra_xusb_find_usb2_port(padctl, index);
-	if (!port) {
-		dev_err(dev, "no port found for USB2 lane %u\n", index);
+	if (!phy || usb2->powered_on)
 		return;
-	}
 
 	tegra186_utmi_bias_pad_power_on(padctl);
 
@@ -280,16 +259,19 @@ static void tegra_phy_xusb_utmi_pad_power_on(struct phy *phy)
 	value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
 	value &= ~USB2_OTG_PD_DR;
 	padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
+
+	usb2->powered_on = true;
 }
 
 static void tegra_phy_xusb_utmi_pad_power_down(struct phy *phy)
 {
 	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
 	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
+	struct tegra_xusb_usb2_lane *usb2 = to_usb2_lane(lane);
 	unsigned int index = lane->index;
 	u32 value;
 
-	if (!phy)
+	if (!phy || !usb2->powered_on)
 		return;
 
 	value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
@@ -303,6 +285,8 @@ static void tegra_phy_xusb_utmi_pad_power_down(struct phy *phy)
 	udelay(2);
 
 	tegra186_utmi_bias_pad_power_off(padctl);
+
+	usb2->powered_on = false;
 }
 
 static int tegra186_xusb_padctl_vbus_override(struct tegra_xusb_padctl *padctl,
@@ -413,6 +397,8 @@ static int tegra186_utmi_phy_power_on(struct phy *phy)
 		return -ENODEV;
 	}
 
+	mutex_lock(&padctl->lock);
+
 	value = padctl_readl(padctl, XUSB_PADCTL_USB2_PAD_MUX);
 	value &= ~(USB2_PORT_MASK << USB2_PORT_SHIFT(index));
 	value |= (PORT_XUSB << USB2_PORT_SHIFT(index));
@@ -464,14 +450,23 @@ static int tegra186_utmi_phy_power_on(struct phy *phy)
 
 	/* TODO: pad power saving */
 	tegra_phy_xusb_utmi_pad_power_on(phy);
+
+	mutex_unlock(&padctl->lock);
 	return 0;
 }
 
 static int tegra186_utmi_phy_power_off(struct phy *phy)
 {
+	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
+	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
+
+	mutex_lock(&padctl->lock);
+
 	/* TODO: pad power saving */
 	tegra_phy_xusb_utmi_pad_power_down(phy);
 
+	mutex_unlock(&padctl->lock);
+
 	return 0;
 }
 
@@ -938,6 +933,8 @@ static const struct tegra_xusb_padctl_ops tegra186_xusb_padctl_ops = {
 	.probe = tegra186_xusb_padctl_probe,
 	.remove = tegra186_xusb_padctl_remove,
 	.vbus_override = tegra186_xusb_padctl_vbus_override,
+	.utmi_pad_power_on = tegra_phy_xusb_utmi_pad_power_on,
+	.utmi_pad_power_down = tegra_phy_xusb_utmi_pad_power_down,
 };
 
 #if IS_ENABLED(CONFIG_ARCH_TEGRA_186_SOC)
diff --git a/drivers/phy/tegra/xusb.h b/drivers/phy/tegra/xusb.h
index ea35af7..6995fc4 100644
--- a/drivers/phy/tegra/xusb.h
+++ b/drivers/phy/tegra/xusb.h
@@ -396,6 +396,8 @@ struct tegra_xusb_padctl_ops {
 				    unsigned int index, bool enable);
 	int (*vbus_override)(struct tegra_xusb_padctl *padctl, bool set);
 	int (*utmi_port_reset)(struct phy *phy);
+	void (*utmi_pad_power_on)(struct phy *phy);
+	void (*utmi_pad_power_down)(struct phy *phy);
 };
 
 struct tegra_xusb_padctl_soc {
-- 
2.7.4

[PATCH V3 3/8] phy: tegra: xusb: Add support for UTMI pad power control

[Nagarjuna Kristam]

Add support for UTMI pad power on and off API's via soc ops. These API
can be used by operations like charger detect to power on and off UTMI
pad if needed. Update powered_on flag in the pad power control API's.

Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
---
V3:
 - Added Acked-by updates to commit message.
---
V2:
 - Patch re-based.
---
 drivers/phy/tegra/xusb-tegra186.c | 51 ++++++++++++++++++---------------------
 drivers/phy/tegra/xusb.h          |  2 ++
 2 files changed, 26 insertions(+), 27 deletions(-)

diff --git a/drivers/phy/tegra/xusb-tegra186.c b/drivers/phy/tegra/xusb-tegra186.c
index 5d64f69..f862254 100644
--- a/drivers/phy/tegra/xusb-tegra186.c
+++ b/drivers/phy/tegra/xusb-tegra186.c
@@ -192,12 +192,8 @@ static void tegra186_utmi_bias_pad_power_on(struct tegra_xusb_padctl *padctl)
 	u32 value;
 	int err;
 
-	mutex_lock(&padctl->lock);
-
-	if (priv->bias_pad_enable++ > 0) {
-		mutex_unlock(&padctl->lock);
+	if (priv->bias_pad_enable++ > 0)
 		return;
-	}
 
 	err = clk_prepare_enable(priv->usb2_trk_clk);
 	if (err < 0)
@@ -221,8 +217,6 @@ static void tegra186_utmi_bias_pad_power_on(struct tegra_xusb_padctl *padctl)
 	value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
 	value &= ~USB2_PD_TRK;
 	padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
-
-	mutex_unlock(&padctl->lock);
 }
 
 static void tegra186_utmi_bias_pad_power_off(struct tegra_xusb_padctl *padctl)
@@ -230,44 +224,29 @@ static void tegra186_utmi_bias_pad_power_off(struct tegra_xusb_padctl *padctl)
 	struct tegra186_xusb_padctl *priv = to_tegra186_xusb_padctl(padctl);
 	u32 value;
 
-	mutex_lock(&padctl->lock);
-
-	if (WARN_ON(priv->bias_pad_enable == 0)) {
-		mutex_unlock(&padctl->lock);
+	if (WARN_ON(priv->bias_pad_enable == 0))
 		return;
-	}
 
-	if (--priv->bias_pad_enable > 0) {
-		mutex_unlock(&padctl->lock);
+	if (--priv->bias_pad_enable > 0)
 		return;
-	}
 
 	value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
 	value |= USB2_PD_TRK;
 	padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
 
 	clk_disable_unprepare(priv->usb2_trk_clk);
-
-	mutex_unlock(&padctl->lock);
 }
 
 static void tegra_phy_xusb_utmi_pad_power_on(struct phy *phy)
 {
 	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
 	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
-	struct tegra_xusb_usb2_port *port;
-	struct device *dev = padctl->dev;
+	struct tegra_xusb_usb2_lane *usb2 = to_usb2_lane(lane);
 	unsigned int index = lane->index;
 	u32 value;
 
-	if (!phy)
-		return;
-
-	port = tegra_xusb_find_usb2_port(padctl, index);
-	if (!port) {
-		dev_err(dev, "no port found for USB2 lane %u\n", index);
+	if (!phy || usb2->powered_on)
 		return;
-	}
 
 	tegra186_utmi_bias_pad_power_on(padctl);
 
@@ -280,16 +259,19 @@ static void tegra_phy_xusb_utmi_pad_power_on(struct phy *phy)
 	value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
 	value &= ~USB2_OTG_PD_DR;
 	padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
+
+	usb2->powered_on = true;
 }
 
 static void tegra_phy_xusb_utmi_pad_power_down(struct phy *phy)
 {
 	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
 	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
+	struct tegra_xusb_usb2_lane *usb2 = to_usb2_lane(lane);
 	unsigned int index = lane->index;
 	u32 value;
 
-	if (!phy)
+	if (!phy || !usb2->powered_on)
 		return;
 
 	value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
@@ -303,6 +285,8 @@ static void tegra_phy_xusb_utmi_pad_power_down(struct phy *phy)
 	udelay(2);
 
 	tegra186_utmi_bias_pad_power_off(padctl);
+
+	usb2->powered_on = false;
 }
 
 static int tegra186_xusb_padctl_vbus_override(struct tegra_xusb_padctl *padctl,
@@ -413,6 +397,8 @@ static int tegra186_utmi_phy_power_on(struct phy *phy)
 		return -ENODEV;
 	}
 
+	mutex_lock(&padctl->lock);
+
 	value = padctl_readl(padctl, XUSB_PADCTL_USB2_PAD_MUX);
 	value &= ~(USB2_PORT_MASK << USB2_PORT_SHIFT(index));
 	value |= (PORT_XUSB << USB2_PORT_SHIFT(index));
@@ -464,14 +450,23 @@ static int tegra186_utmi_phy_power_on(struct phy *phy)
 
 	/* TODO: pad power saving */
 	tegra_phy_xusb_utmi_pad_power_on(phy);
+
+	mutex_unlock(&padctl->lock);
 	return 0;
 }
 
 static int tegra186_utmi_phy_power_off(struct phy *phy)
 {
+	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
+	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
+
+	mutex_lock(&padctl->lock);
+
 	/* TODO: pad power saving */
 	tegra_phy_xusb_utmi_pad_power_down(phy);
 
+	mutex_unlock(&padctl->lock);
+
 	return 0;
 }
 
@@ -938,6 +933,8 @@ static const struct tegra_xusb_padctl_ops tegra186_xusb_padctl_ops = {
 	.probe = tegra186_xusb_padctl_probe,
 	.remove = tegra186_xusb_padctl_remove,
 	.vbus_override = tegra186_xusb_padctl_vbus_override,
+	.utmi_pad_power_on = tegra_phy_xusb_utmi_pad_power_on,
+	.utmi_pad_power_down = tegra_phy_xusb_utmi_pad_power_down,
 };
 
 #if IS_ENABLED(CONFIG_ARCH_TEGRA_186_SOC)
diff --git a/drivers/phy/tegra/xusb.h b/drivers/phy/tegra/xusb.h
index ea35af7..6995fc4 100644
--- a/drivers/phy/tegra/xusb.h
+++ b/drivers/phy/tegra/xusb.h
@@ -396,6 +396,8 @@ struct tegra_xusb_padctl_ops {
 				    unsigned int index, bool enable);
 	int (*vbus_override)(struct tegra_xusb_padctl *padctl, bool set);
 	int (*utmi_port_reset)(struct phy *phy);
+	void (*utmi_pad_power_on)(struct phy *phy);
+	void (*utmi_pad_power_down)(struct phy *phy);
 };
 
 struct tegra_xusb_padctl_soc {
-- 
2.7.4

[PATCH V3 6/8] phy: tegra: xusb: Add support for charger detect

[Nagarjuna Kristam]

Perform charger-detect operation if corresponding dt property is enabled.
Update usb-phy with the detected charger state and max current values.
Register charger-detect API's of usb-phy to provide needed functionalities.

Signed-off-by: Nagarjuna Kristam <nkristam-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
V3:
 - Allighed functions and its arguments.
 - replaced spaced by tabs for MACRO definition allignments.
 - Unified primary and secondary charger detect API's.
 - Used readl_poll_timeout instead of while loop condition check for register.
 - Fixed other comments as per inputs from Thierry.
---
V2:
 - Patch re-based.
---
 drivers/phy/tegra/Makefile |   2 +-
 drivers/phy/tegra/cd.c     | 283 +++++++++++++++++++++++++++++++++++++++++++++
 drivers/phy/tegra/xusb.c   |  80 +++++++++++++
 drivers/phy/tegra/xusb.h   |   7 ++
 4 files changed, 371 insertions(+), 1 deletion(-)
 create mode 100644 drivers/phy/tegra/cd.c

diff --git a/drivers/phy/tegra/Makefile b/drivers/phy/tegra/Makefile
index 89b8406..befdfc4 100644
--- a/drivers/phy/tegra/Makefile
+++ b/drivers/phy/tegra/Makefile
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
 obj-$(CONFIG_PHY_TEGRA_XUSB) += phy-tegra-xusb.o
 
-phy-tegra-xusb-y += xusb.o
+phy-tegra-xusb-y += xusb.o cd.o
 phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_124_SOC) += xusb-tegra124.o
 phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_132_SOC) += xusb-tegra124.o
 phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_210_SOC) += xusb-tegra210.o
diff --git a/drivers/phy/tegra/cd.c b/drivers/phy/tegra/cd.c
new file mode 100644
index 0000000..fddbe4c
--- /dev/null
+++ b/drivers/phy/tegra/cd.c
@@ -0,0 +1,283 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2020, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#include <linux/delay.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/phy/phy.h>
+
+#include "xusb.h"
+
+/* Data contact detection timeout */
+#define TDCD_TIMEOUT_MS				400
+
+#define USB2_BATTERY_CHRG_OTGPADX_CTL0(x)	(0x80 + (x) * 0x40)
+#define  PD_CHG					(1 << 0)
+#define  VDCD_DET_FILTER_EN			(1 << 4)
+#define  VDAT_DET				(1 << 5)
+#define  VDAT_DET_FILTER_EN			(1 << 8)
+#define  OP_SINK_EN				(1 << 9)
+#define  OP_SRC_EN				(1 << 10)
+#define  ON_SINK_EN				(1 << 11)
+#define  ON_SRC_EN				(1 << 12)
+#define  OP_I_SRC_EN				(1 << 13)
+#define  ZIP_FILTER_EN				(1 << 21)
+#define  ZIN_FILTER_EN				(1 << 25)
+#define  DCD_DETECTED				(1 << 26)
+
+#define USB2_BATTERY_CHRG_OTGPADX_CTL1(x)	(0x84 + (x) * 0x40)
+#define  PD_VREG				(1 << 6)
+#define  VREG_LEV(x)				(((x) & 0x3) << 7)
+#define  VREG_DIR(x)				(((x) & 0x3) << 11)
+#define  VREG_DIR_IN				VREG_DIR(1)
+#define  VREG_DIR_OUT				VREG_DIR(2)
+#define  USBOP_RPD_OVRD				(1 << 16)
+#define  USBOP_RPD_OVRD_VAL			(1 << 17)
+#define  USBOP_RPU_OVRD				(1 << 18)
+#define  USBOP_RPU_OVRD_VAL			(1 << 19)
+#define  USBON_RPD_OVRD				(1 << 20)
+#define  USBON_RPD_OVRD_VAL			(1 << 21)
+#define  USBON_RPU_OVRD				(1 << 22)
+#define  USBON_RPU_OVRD_VAL			(1 << 23)
+
+#define XUSB_PADCTL_USB2_OTG_PADX_CTL0(x)	(0x88 + (x) * 0x40)
+#define  USB2_OTG_PD2				(1 << 27)
+#define  USB2_OTG_PD2_OVRD_EN			(1 << 28)
+#define  USB2_OTG_PD_ZI				(1 << 29)
+
+#define XUSB_PADCTL_USB2_BATTERY_CHRG_TDCD_DBNC_TIMER_0 (0x280)
+#define   TDCD_DBNC(x)				(((x) & 0x7ff) << 0)
+
+static void
+tegra_xusb_padctl_set_debounce_time(struct tegra_xusb_padctl *padctl,
+				    u32 debounce)
+{
+	u32 value;
+
+	value = padctl_readl(padctl,
+		XUSB_PADCTL_USB2_BATTERY_CHRG_TDCD_DBNC_TIMER_0);
+	value &= ~(TDCD_DBNC(0));
+	value |= TDCD_DBNC(debounce);
+	padctl_writel(padctl, value,
+		XUSB_PADCTL_USB2_BATTERY_CHRG_TDCD_DBNC_TIMER_0);
+}
+
+static void
+tegra_xusb_padctl_charger_detect_on(struct tegra_xusb_padctl *padctl, u32 index)
+{
+	u32 value;
+
+	value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
+	value &= ~USB2_OTG_PD_ZI;
+	padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
+
+	value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
+	value |= (USB2_OTG_PD2 | USB2_OTG_PD2_OVRD_EN);
+	padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
+
+	value = padctl_readl(padctl, USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
+	value &= ~PD_CHG;
+	padctl_writel(padctl, value, USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
+
+	/* Set DP/DN Pull up/down to zero by default */
+	value = padctl_readl(padctl, USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
+	value &= ~(USBOP_RPD_OVRD_VAL | USBOP_RPU_OVRD_VAL |
+		USBON_RPD_OVRD_VAL | USBON_RPU_OVRD_VAL);
+	value |= (USBOP_RPD_OVRD | USBOP_RPU_OVRD |
+		USBON_RPD_OVRD | USBON_RPU_OVRD);
+	padctl_writel(padctl, value, USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
+
+	/* Disable DP/DN as src/sink */
+	value = padctl_readl(padctl, USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
+	value &= ~(OP_SRC_EN | ON_SINK_EN |
+	ON_SRC_EN | OP_SINK_EN);
+	padctl_writel(padctl, value, USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
+}
+
+static void
+tegra_xusb_padctl_charger_detect_off(struct tegra_xusb_padctl *padctl,
+				     u32 index)
+{
+	u32 value;
+
+	value = padctl_readl(padctl, USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
+	value &= ~(USBOP_RPD_OVRD | USBOP_RPU_OVRD |
+		 USBON_RPD_OVRD | USBON_RPU_OVRD);
+	padctl_writel(padctl, value, USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
+
+	/* power down necessary stuff */
+	value = padctl_readl(padctl, USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
+	value |= PD_CHG;
+	padctl_writel(padctl, value, USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
+
+	value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
+	value &= ~(USB2_OTG_PD2 | USB2_OTG_PD2_OVRD_EN);
+	padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
+}
+
+
+static void tegra_xusb_padctl_detect_filters(struct tegra_xusb_padctl *padctl,
+					     u32 index, bool on)
+{
+	u32 value;
+
+	if (on) {
+		value = padctl_readl(padctl,
+				     USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
+		value |= (VDCD_DET_FILTER_EN | VDAT_DET_FILTER_EN |
+			  ZIP_FILTER_EN | ZIN_FILTER_EN);
+		padctl_writel(padctl, value,
+			      USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
+	} else {
+		value = padctl_readl(padctl,
+				     USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
+		value &= ~(VDCD_DET_FILTER_EN | VDAT_DET_FILTER_EN |
+			   ZIP_FILTER_EN | ZIN_FILTER_EN);
+		padctl_writel(padctl, value,
+			      USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
+	}
+}
+
+static void tegra_xusb_padctl_dcd(struct tegra_xusb_padctl *padctl, u32 index)
+{
+	u32 value;
+	unsigned int offset;
+	bool ret = false;
+
+	/* Turn on IDP_SRC */
+	value = padctl_readl(padctl, USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
+	value |= OP_I_SRC_EN;
+	padctl_writel(padctl, value, USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
+
+	/* Turn on D- pull-down resistor */
+	value = padctl_readl(padctl, USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
+	value |= USBON_RPD_OVRD_VAL;
+	padctl_writel(padctl, value, USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
+
+	/* Wait for TDCD_DBNC (DCD debounce), refer to BC1.2 spec Table 5 */
+	usleep_range(10000, 20000);
+
+	offset = USB2_BATTERY_CHRG_OTGPADX_CTL0(index);
+	ret = readl_poll_timeout(padctl->regs + offset, value,
+				 value & DCD_DETECTED, 20000,
+				 TDCD_TIMEOUT_MS * 1000);
+	if (!ret)
+		dev_warn(padctl->dev, "%s: DCD timeout.", __func__);
+
+	/* Turn off IP_SRC, clear DCD DETECTED*/
+	value = padctl_readl(padctl, USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
+	value &= ~OP_I_SRC_EN;
+	value |= DCD_DETECTED;
+	padctl_writel(padctl, value, USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
+
+	/* Turn off D- pull-down resistor */
+	value = padctl_readl(padctl, USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
+	value &= ~USBON_RPD_OVRD_VAL;
+	padctl_writel(padctl, value, USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
+
+	dev_dbg(padctl->dev, "DCD detected: %d\n", !ret);
+}
+
+static bool
+tegra_xusb_padctl_primary_secondary(struct tegra_xusb_padctl *padctl, u32 index,
+				    bool is_primary)
+{
+	u32 value;
+	u32 config = is_primary ? (OP_SRC_EN | ON_SINK_EN) :
+				  (ON_SRC_EN | OP_SINK_EN);
+	bool ret = false;
+
+	if (is_primary)
+		/* data contact detection */
+		tegra_xusb_padctl_dcd(padctl, index);
+
+	/* Source D- to D+ */
+	value = padctl_readl(padctl, USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
+	value |= config;
+	padctl_writel(padctl, value, USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
+
+	/*
+	 * Wait for TVDPSRC_ON/TVDMSRC_ON(D+/- voltage source on time),
+	 * refer to BC1.2 spec Table 5
+	 */
+	msleep(40);
+
+	value = padctl_readl(padctl, USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
+	if (is_primary)
+		ret = !!(value & VDAT_DET);
+	else
+		ret = !(value & VDAT_DET);
+
+	/* Turn off ON_SRC, OP_SINK, clear VDAT, ZIP status change */
+	value = padctl_readl(padctl, USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
+	value &= ~config;
+	padctl_writel(padctl, value, USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
+
+	return ret;
+}
+
+static const char *const chrg_types[] = {
+	[UNKNOWN_TYPE] = "Unknown Type",
+	[SDP_TYPE] = "SDP Type",
+	[DCP_TYPE] = "DCP Type",
+	[CDP_TYPE] = "CDP Type",
+	[ACA_TYPE] = "ACA Type",
+};
+
+enum usb_charger_type
+tegra_xusb_padctl_charger_detect(struct tegra_xusb_port *port)
+{
+	struct tegra_xusb_padctl *padctl = port->padctl;
+	struct phy *phy = port->lane->pad->lanes[port->index];
+	struct tegra_xusb_usb2_lane *usb2 = to_usb2_lane(port->lane);
+	u32 index = port->index;
+	enum usb_charger_type chrg_type;
+	bool pad_power_off = false;
+
+	mutex_lock(&padctl->lock);
+
+	if (!usb2->powered_on) {
+		padctl->soc->ops->utmi_pad_power_on(phy);
+		pad_power_off = true;
+	}
+
+	tegra_xusb_padctl_charger_detect_on(padctl, index);
+	tegra_xusb_padctl_set_debounce_time(padctl, 10);
+	tegra_xusb_padctl_detect_filters(padctl, index, true);
+
+	if (tegra_xusb_padctl_primary_secondary(padctl, index, true)) {
+		/*
+		 * wait 20ms (max of TVDMSRC_DIS) for D- to be disabled
+		 * from host side, before we perform secondary detection.
+		 * Some hosts may not respond well if we do secondary
+		 * detection right after primary detection.
+		 */
+		msleep(20);
+
+		if (tegra_xusb_padctl_primary_secondary(padctl, index, false))
+			chrg_type = CDP_TYPE;
+		else
+			chrg_type = DCP_TYPE;
+	} else {
+		chrg_type = SDP_TYPE;
+	}
+
+	dev_dbg(&port->dev, "charger detected of type %s",
+		chrg_types[chrg_type]);
+
+	tegra_xusb_padctl_detect_filters(padctl, index, false);
+	tegra_xusb_padctl_charger_detect_off(padctl, index);
+
+	if (pad_power_off)
+		padctl->soc->ops->utmi_pad_power_down(phy);
+
+	mutex_unlock(&padctl->lock);
+	return chrg_type;
+}
+
+MODULE_AUTHOR("Nagarjuna Kristam <nkristam-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>");
+MODULE_DESCRIPTION("NVIDIA Tegra186 XUSB charger detect driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c
index de4a46f..7252982 100644
--- a/drivers/phy/tegra/xusb.c
+++ b/drivers/phy/tegra/xusb.c
@@ -591,6 +591,50 @@ static enum usb_phy_events to_usb_phy_event(enum usb_role role)
 	}
 }
 
+#define VON_DIV2P0_DET BIT(0)
+#define VON_DIV2P7_DET BIT(1)
+#define VOP_DIV2P0_DET BIT(2)
+#define VOP_DIV2P7_DET BIT(3)
+
+#define VREG_CUR_LEVEL_0        500
+#define VREG_CUR_LEVEL_1        900
+#define VREG_CUR_LEVEL_2        1500
+#define VREG_CUR_LEVEL_3        2000
+
+#define IS_CUR_IN_RANGE(ma, low, high)  \
+	((ma >= VREG_CUR_LEVEL_##low) && (ma <= (VREG_CUR_LEVEL_##high - 1)))
+#define VREG_LVL(ma, level)     IS_CUR_IN_RANGE(ma, level, level + 1)
+
+static void tegra_xusb_padctl_vbus_pad_portection(struct tegra_xusb_port *port)
+{
+	struct tegra_xusb_padctl *padctl = port->padctl;
+	int level = 0;
+	enum tegra_vbus_dir dir = TEGRA_VBUS_SINK;
+	int max_ua, min_ua;
+
+	if (!padctl->soc->ops->utmi_pad_set_protection)
+		return;
+
+	usb_phy_get_charger_current(&port->usb_phy, &min_ua, &max_ua);
+
+	if (max_ua == 0) {
+		level = -1;
+		dir = TEGRA_VBUS_DEFAULT;
+	} else if (VREG_LVL(max_ua, 0)) {
+		level = 0;
+	} else if (VREG_LVL(max_ua, 1)) {
+		level = 1;
+	} else if (VREG_LVL(max_ua, 2)) {
+		level = 2;
+	} else if (max_ua >= VREG_CUR_LEVEL_3) {
+		level = 3;
+	} else {
+		return;
+	}
+
+	padctl->soc->ops->utmi_pad_set_protection(port, level, dir);
+}
+
 static void tegra_xusb_usb_phy_work(struct work_struct *work)
 {
 	struct tegra_xusb_port *port = container_of(work,
@@ -598,6 +642,10 @@ static void tegra_xusb_usb_phy_work(struct work_struct *work)
 						    usb_phy_work);
 	enum usb_role role = usb_role_switch_get_role(port->usb_role_sw);
 
+	/* Set role to none, if charger is DCP type */
+	if (port->chrg_type == DCP_TYPE)
+		role = USB_ROLE_NONE;
+
 	usb_phy_set_event(&port->usb_phy, to_usb_phy_event(role));
 
 	dev_dbg(&port->dev, "%s(): calling notifier for role %s\n", __func__,
@@ -610,9 +658,26 @@ static int tegra_xusb_role_sw_set(struct usb_role_switch *sw,
 				  enum usb_role role)
 {
 	struct tegra_xusb_port *port = usb_role_switch_get_drvdata(sw);
+	enum usb_charger_state charger_state;
 
 	dev_dbg(&port->dev, "%s(): role %s\n", __func__, usb_roles[role]);
 
+	/* Do charger detect if role is Device and charger detect is enabled */
+	if (port->charger_detect) {
+		if (role == USB_ROLE_DEVICE)
+			port->chrg_type =
+					 tegra_xusb_padctl_charger_detect(port);
+		else
+			port->chrg_type = UNKNOWN_TYPE;
+
+		charger_state = (port->chrg_type == UNKNOWN_TYPE) ?
+				 USB_CHARGER_ABSENT : USB_CHARGER_PRESENT;
+
+		usb_phy_set_charger_state(&port->usb_phy, charger_state);
+
+		tegra_xusb_padctl_vbus_pad_portection(port);
+	}
+
 	schedule_work(&port->usb_phy_work);
 
 	return 0;
@@ -643,6 +708,14 @@ static int tegra_xusb_set_host(struct usb_otg *otg, struct usb_bus *host)
 	return 0;
 }
 
+static enum usb_charger_type tegra_xusb_charger_detect(struct usb_phy *usb_phy)
+{
+	struct tegra_xusb_port *port = container_of(usb_phy,
+						    struct tegra_xusb_port,
+						    usb_phy);
+
+	return port->chrg_type;
+}
 
 static int tegra_xusb_setup_usb_role_switch(struct tegra_xusb_port *port)
 {
@@ -693,6 +766,9 @@ static int tegra_xusb_setup_usb_role_switch(struct tegra_xusb_port *port)
 	port->usb_phy.otg->set_peripheral = tegra_xusb_set_peripheral;
 	port->usb_phy.otg->set_host = tegra_xusb_set_host;
 
+	if (port->charger_detect)
+		port->usb_phy.charger_detect = tegra_xusb_charger_detect;
+
 	err = usb_add_phy_dev(&port->usb_phy);
 	if (err < 0) {
 		dev_err(&port->dev, "Failed to add USB PHY: %d\n", err);
@@ -727,6 +803,10 @@ static int tegra_xusb_usb2_port_parse_dt(struct tegra_xusb_usb2_port *usb2)
 		usb2->mode = USB_DR_MODE_HOST;
 	}
 
+	if (port->padctl->soc->supports_charger_detect &&
+	    of_property_read_bool(np, "nvidia,charger-detect"))
+		port->charger_detect = true;
+
 	/* usb-role-switch property is mandatory for OTG/Peripheral modes */
 	if (usb2->mode == USB_DR_MODE_PERIPHERAL ||
 	    usb2->mode == USB_DR_MODE_OTG) {
diff --git a/drivers/phy/tegra/xusb.h b/drivers/phy/tegra/xusb.h
index 475bcc6..7b9a798 100644
--- a/drivers/phy/tegra/xusb.h
+++ b/drivers/phy/tegra/xusb.h
@@ -282,6 +282,9 @@ struct tegra_xusb_port {
 	struct work_struct usb_phy_work;
 	struct usb_phy usb_phy;
 
+	bool charger_detect;
+	enum usb_charger_type chrg_type;
+
 	const struct tegra_xusb_port_ops *ops;
 };
 
@@ -306,6 +309,9 @@ struct tegra_xusb_port *
 tegra_xusb_find_port(struct tegra_xusb_padctl *padctl, const char *type,
 		     unsigned int index);
 
+enum usb_charger_type tegra_xusb_padctl_charger_detect(
+					  struct tegra_xusb_port *port);
+
 struct tegra_xusb_usb2_port {
 	struct tegra_xusb_port base;
 
@@ -430,6 +436,7 @@ struct tegra_xusb_padctl_soc {
 	unsigned int num_supplies;
 	bool supports_gen2;
 	bool need_fake_usb3_port;
+	bool supports_charger_detect;
 };
 
 struct tegra_xusb_padctl {
-- 
2.7.4

[PATCH V3 6/8] phy: tegra: xusb: Add support for charger detect

[Nagarjuna Kristam]

Perform charger-detect operation if corresponding dt property is enabled.
Update usb-phy with the detected charger state and max current values.
Register charger-detect API's of usb-phy to provide needed functionalities.

Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
---
V3:
 - Allighed functions and its arguments.
 - replaced spaced by tabs for MACRO definition allignments.
 - Unified primary and secondary charger detect API's.
 - Used readl_poll_timeout instead of while loop condition check for register.
 - Fixed other comments as per inputs from Thierry.
---
V2:
 - Patch re-based.
---
 drivers/phy/tegra/Makefile |   2 +-
 drivers/phy/tegra/cd.c     | 283 +++++++++++++++++++++++++++++++++++++++++++++
 drivers/phy/tegra/xusb.c   |  80 +++++++++++++
 drivers/phy/tegra/xusb.h   |   7 ++
 4 files changed, 371 insertions(+), 1 deletion(-)
 create mode 100644 drivers/phy/tegra/cd.c

diff --git a/drivers/phy/tegra/Makefile b/drivers/phy/tegra/Makefile
index 89b8406..befdfc4 100644
--- a/drivers/phy/tegra/Makefile
+++ b/drivers/phy/tegra/Makefile
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
 obj-$(CONFIG_PHY_TEGRA_XUSB) += phy-tegra-xusb.o
 
-phy-tegra-xusb-y += xusb.o
+phy-tegra-xusb-y += xusb.o cd.o
 phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_124_SOC) += xusb-tegra124.o
 phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_132_SOC) += xusb-tegra124.o
 phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_210_SOC) += xusb-tegra210.o
diff --git a/drivers/phy/tegra/cd.c b/drivers/phy/tegra/cd.c
new file mode 100644
index 0000000..fddbe4c
--- /dev/null
+++ b/drivers/phy/tegra/cd.c
@@ -0,0 +1,283 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2020, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#include <linux/delay.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/phy/phy.h>
+
+#include "xusb.h"
+
+/* Data contact detection timeout */
+#define TDCD_TIMEOUT_MS				400
+
+#define USB2_BATTERY_CHRG_OTGPADX_CTL0(x)	(0x80 + (x) * 0x40)
+#define  PD_CHG					(1 << 0)
+#define  VDCD_DET_FILTER_EN			(1 << 4)
+#define  VDAT_DET				(1 << 5)
+#define  VDAT_DET_FILTER_EN			(1 << 8)
+#define  OP_SINK_EN				(1 << 9)
+#define  OP_SRC_EN				(1 << 10)
+#define  ON_SINK_EN				(1 << 11)
+#define  ON_SRC_EN				(1 << 12)
+#define  OP_I_SRC_EN				(1 << 13)
+#define  ZIP_FILTER_EN				(1 << 21)
+#define  ZIN_FILTER_EN				(1 << 25)
+#define  DCD_DETECTED				(1 << 26)
+
+#define USB2_BATTERY_CHRG_OTGPADX_CTL1(x)	(0x84 + (x) * 0x40)
+#define  PD_VREG				(1 << 6)
+#define  VREG_LEV(x)				(((x) & 0x3) << 7)
+#define  VREG_DIR(x)				(((x) & 0x3) << 11)
+#define  VREG_DIR_IN				VREG_DIR(1)
+#define  VREG_DIR_OUT				VREG_DIR(2)
+#define  USBOP_RPD_OVRD				(1 << 16)
+#define  USBOP_RPD_OVRD_VAL			(1 << 17)
+#define  USBOP_RPU_OVRD				(1 << 18)
+#define  USBOP_RPU_OVRD_VAL			(1 << 19)
+#define  USBON_RPD_OVRD				(1 << 20)
+#define  USBON_RPD_OVRD_VAL			(1 << 21)
+#define  USBON_RPU_OVRD				(1 << 22)
+#define  USBON_RPU_OVRD_VAL			(1 << 23)
+
+#define XUSB_PADCTL_USB2_OTG_PADX_CTL0(x)	(0x88 + (x) * 0x40)
+#define  USB2_OTG_PD2				(1 << 27)
+#define  USB2_OTG_PD2_OVRD_EN			(1 << 28)
+#define  USB2_OTG_PD_ZI				(1 << 29)
+
+#define XUSB_PADCTL_USB2_BATTERY_CHRG_TDCD_DBNC_TIMER_0 (0x280)
+#define   TDCD_DBNC(x)				(((x) & 0x7ff) << 0)
+
+static void
+tegra_xusb_padctl_set_debounce_time(struct tegra_xusb_padctl *padctl,
+				    u32 debounce)
+{
+	u32 value;
+
+	value = padctl_readl(padctl,
+		XUSB_PADCTL_USB2_BATTERY_CHRG_TDCD_DBNC_TIMER_0);
+	value &= ~(TDCD_DBNC(0));
+	value |= TDCD_DBNC(debounce);
+	padctl_writel(padctl, value,
+		XUSB_PADCTL_USB2_BATTERY_CHRG_TDCD_DBNC_TIMER_0);
+}
+
+static void
+tegra_xusb_padctl_charger_detect_on(struct tegra_xusb_padctl *padctl, u32 index)
+{
+	u32 value;
+
+	value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
+	value &= ~USB2_OTG_PD_ZI;
+	padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
+
+	value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
+	value |= (USB2_OTG_PD2 | USB2_OTG_PD2_OVRD_EN);
+	padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
+
+	value = padctl_readl(padctl, USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
+	value &= ~PD_CHG;
+	padctl_writel(padctl, value, USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
+
+	/* Set DP/DN Pull up/down to zero by default */
+	value = padctl_readl(padctl, USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
+	value &= ~(USBOP_RPD_OVRD_VAL | USBOP_RPU_OVRD_VAL |
+		USBON_RPD_OVRD_VAL | USBON_RPU_OVRD_VAL);
+	value |= (USBOP_RPD_OVRD | USBOP_RPU_OVRD |
+		USBON_RPD_OVRD | USBON_RPU_OVRD);
+	padctl_writel(padctl, value, USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
+
+	/* Disable DP/DN as src/sink */
+	value = padctl_readl(padctl, USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
+	value &= ~(OP_SRC_EN | ON_SINK_EN |
+	ON_SRC_EN | OP_SINK_EN);
+	padctl_writel(padctl, value, USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
+}
+
+static void
+tegra_xusb_padctl_charger_detect_off(struct tegra_xusb_padctl *padctl,
+				     u32 index)
+{
+	u32 value;
+
+	value = padctl_readl(padctl, USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
+	value &= ~(USBOP_RPD_OVRD | USBOP_RPU_OVRD |
+		 USBON_RPD_OVRD | USBON_RPU_OVRD);
+	padctl_writel(padctl, value, USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
+
+	/* power down necessary stuff */
+	value = padctl_readl(padctl, USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
+	value |= PD_CHG;
+	padctl_writel(padctl, value, USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
+
+	value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
+	value &= ~(USB2_OTG_PD2 | USB2_OTG_PD2_OVRD_EN);
+	padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
+}
+
+
+static void tegra_xusb_padctl_detect_filters(struct tegra_xusb_padctl *padctl,
+					     u32 index, bool on)
+{
+	u32 value;
+
+	if (on) {
+		value = padctl_readl(padctl,
+				     USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
+		value |= (VDCD_DET_FILTER_EN | VDAT_DET_FILTER_EN |
+			  ZIP_FILTER_EN | ZIN_FILTER_EN);
+		padctl_writel(padctl, value,
+			      USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
+	} else {
+		value = padctl_readl(padctl,
+				     USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
+		value &= ~(VDCD_DET_FILTER_EN | VDAT_DET_FILTER_EN |
+			   ZIP_FILTER_EN | ZIN_FILTER_EN);
+		padctl_writel(padctl, value,
+			      USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
+	}
+}
+
+static void tegra_xusb_padctl_dcd(struct tegra_xusb_padctl *padctl, u32 index)
+{
+	u32 value;
+	unsigned int offset;
+	bool ret = false;
+
+	/* Turn on IDP_SRC */
+	value = padctl_readl(padctl, USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
+	value |= OP_I_SRC_EN;
+	padctl_writel(padctl, value, USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
+
+	/* Turn on D- pull-down resistor */
+	value = padctl_readl(padctl, USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
+	value |= USBON_RPD_OVRD_VAL;
+	padctl_writel(padctl, value, USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
+
+	/* Wait for TDCD_DBNC (DCD debounce), refer to BC1.2 spec Table 5 */
+	usleep_range(10000, 20000);
+
+	offset = USB2_BATTERY_CHRG_OTGPADX_CTL0(index);
+	ret = readl_poll_timeout(padctl->regs + offset, value,
+				 value & DCD_DETECTED, 20000,
+				 TDCD_TIMEOUT_MS * 1000);
+	if (!ret)
+		dev_warn(padctl->dev, "%s: DCD timeout.", __func__);
+
+	/* Turn off IP_SRC, clear DCD DETECTED*/
+	value = padctl_readl(padctl, USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
+	value &= ~OP_I_SRC_EN;
+	value |= DCD_DETECTED;
+	padctl_writel(padctl, value, USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
+
+	/* Turn off D- pull-down resistor */
+	value = padctl_readl(padctl, USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
+	value &= ~USBON_RPD_OVRD_VAL;
+	padctl_writel(padctl, value, USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
+
+	dev_dbg(padctl->dev, "DCD detected: %d\n", !ret);
+}
+
+static bool
+tegra_xusb_padctl_primary_secondary(struct tegra_xusb_padctl *padctl, u32 index,
+				    bool is_primary)
+{
+	u32 value;
+	u32 config = is_primary ? (OP_SRC_EN | ON_SINK_EN) :
+				  (ON_SRC_EN | OP_SINK_EN);
+	bool ret = false;
+
+	if (is_primary)
+		/* data contact detection */
+		tegra_xusb_padctl_dcd(padctl, index);
+
+	/* Source D- to D+ */
+	value = padctl_readl(padctl, USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
+	value |= config;
+	padctl_writel(padctl, value, USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
+
+	/*
+	 * Wait for TVDPSRC_ON/TVDMSRC_ON(D+/- voltage source on time),
+	 * refer to BC1.2 spec Table 5
+	 */
+	msleep(40);
+
+	value = padctl_readl(padctl, USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
+	if (is_primary)
+		ret = !!(value & VDAT_DET);
+	else
+		ret = !(value & VDAT_DET);
+
+	/* Turn off ON_SRC, OP_SINK, clear VDAT, ZIP status change */
+	value = padctl_readl(padctl, USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
+	value &= ~config;
+	padctl_writel(padctl, value, USB2_BATTERY_CHRG_OTGPADX_CTL0(index));
+
+	return ret;
+}
+
+static const char *const chrg_types[] = {
+	[UNKNOWN_TYPE] = "Unknown Type",
+	[SDP_TYPE] = "SDP Type",
+	[DCP_TYPE] = "DCP Type",
+	[CDP_TYPE] = "CDP Type",
+	[ACA_TYPE] = "ACA Type",
+};
+
+enum usb_charger_type
+tegra_xusb_padctl_charger_detect(struct tegra_xusb_port *port)
+{
+	struct tegra_xusb_padctl *padctl = port->padctl;
+	struct phy *phy = port->lane->pad->lanes[port->index];
+	struct tegra_xusb_usb2_lane *usb2 = to_usb2_lane(port->lane);
+	u32 index = port->index;
+	enum usb_charger_type chrg_type;
+	bool pad_power_off = false;
+
+	mutex_lock(&padctl->lock);
+
+	if (!usb2->powered_on) {
+		padctl->soc->ops->utmi_pad_power_on(phy);
+		pad_power_off = true;
+	}
+
+	tegra_xusb_padctl_charger_detect_on(padctl, index);
+	tegra_xusb_padctl_set_debounce_time(padctl, 10);
+	tegra_xusb_padctl_detect_filters(padctl, index, true);
+
+	if (tegra_xusb_padctl_primary_secondary(padctl, index, true)) {
+		/*
+		 * wait 20ms (max of TVDMSRC_DIS) for D- to be disabled
+		 * from host side, before we perform secondary detection.
+		 * Some hosts may not respond well if we do secondary
+		 * detection right after primary detection.
+		 */
+		msleep(20);
+
+		if (tegra_xusb_padctl_primary_secondary(padctl, index, false))
+			chrg_type = CDP_TYPE;
+		else
+			chrg_type = DCP_TYPE;
+	} else {
+		chrg_type = SDP_TYPE;
+	}
+
+	dev_dbg(&port->dev, "charger detected of type %s",
+		chrg_types[chrg_type]);
+
+	tegra_xusb_padctl_detect_filters(padctl, index, false);
+	tegra_xusb_padctl_charger_detect_off(padctl, index);
+
+	if (pad_power_off)
+		padctl->soc->ops->utmi_pad_power_down(phy);
+
+	mutex_unlock(&padctl->lock);
+	return chrg_type;
+}
+
+MODULE_AUTHOR("Nagarjuna Kristam <nkristam@nvidia.com>");
+MODULE_DESCRIPTION("NVIDIA Tegra186 XUSB charger detect driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c
index de4a46f..7252982 100644
--- a/drivers/phy/tegra/xusb.c
+++ b/drivers/phy/tegra/xusb.c
@@ -591,6 +591,50 @@ static enum usb_phy_events to_usb_phy_event(enum usb_role role)
 	}
 }
 
+#define VON_DIV2P0_DET BIT(0)
+#define VON_DIV2P7_DET BIT(1)
+#define VOP_DIV2P0_DET BIT(2)
+#define VOP_DIV2P7_DET BIT(3)
+
+#define VREG_CUR_LEVEL_0        500
+#define VREG_CUR_LEVEL_1        900
+#define VREG_CUR_LEVEL_2        1500
+#define VREG_CUR_LEVEL_3        2000
+
+#define IS_CUR_IN_RANGE(ma, low, high)  \
+	((ma >= VREG_CUR_LEVEL_##low) && (ma <= (VREG_CUR_LEVEL_##high - 1)))
+#define VREG_LVL(ma, level)     IS_CUR_IN_RANGE(ma, level, level + 1)
+
+static void tegra_xusb_padctl_vbus_pad_portection(struct tegra_xusb_port *port)
+{
+	struct tegra_xusb_padctl *padctl = port->padctl;
+	int level = 0;
+	enum tegra_vbus_dir dir = TEGRA_VBUS_SINK;
+	int max_ua, min_ua;
+
+	if (!padctl->soc->ops->utmi_pad_set_protection)
+		return;
+
+	usb_phy_get_charger_current(&port->usb_phy, &min_ua, &max_ua);
+
+	if (max_ua == 0) {
+		level = -1;
+		dir = TEGRA_VBUS_DEFAULT;
+	} else if (VREG_LVL(max_ua, 0)) {
+		level = 0;
+	} else if (VREG_LVL(max_ua, 1)) {
+		level = 1;
+	} else if (VREG_LVL(max_ua, 2)) {
+		level = 2;
+	} else if (max_ua >= VREG_CUR_LEVEL_3) {
+		level = 3;
+	} else {
+		return;
+	}
+
+	padctl->soc->ops->utmi_pad_set_protection(port, level, dir);
+}
+
 static void tegra_xusb_usb_phy_work(struct work_struct *work)
 {
 	struct tegra_xusb_port *port = container_of(work,
@@ -598,6 +642,10 @@ static void tegra_xusb_usb_phy_work(struct work_struct *work)
 						    usb_phy_work);
 	enum usb_role role = usb_role_switch_get_role(port->usb_role_sw);
 
+	/* Set role to none, if charger is DCP type */
+	if (port->chrg_type == DCP_TYPE)
+		role = USB_ROLE_NONE;
+
 	usb_phy_set_event(&port->usb_phy, to_usb_phy_event(role));
 
 	dev_dbg(&port->dev, "%s(): calling notifier for role %s\n", __func__,
@@ -610,9 +658,26 @@ static int tegra_xusb_role_sw_set(struct usb_role_switch *sw,
 				  enum usb_role role)
 {
 	struct tegra_xusb_port *port = usb_role_switch_get_drvdata(sw);
+	enum usb_charger_state charger_state;
 
 	dev_dbg(&port->dev, "%s(): role %s\n", __func__, usb_roles[role]);
 
+	/* Do charger detect if role is Device and charger detect is enabled */
+	if (port->charger_detect) {
+		if (role == USB_ROLE_DEVICE)
+			port->chrg_type =
+					 tegra_xusb_padctl_charger_detect(port);
+		else
+			port->chrg_type = UNKNOWN_TYPE;
+
+		charger_state = (port->chrg_type == UNKNOWN_TYPE) ?
+				 USB_CHARGER_ABSENT : USB_CHARGER_PRESENT;
+
+		usb_phy_set_charger_state(&port->usb_phy, charger_state);
+
+		tegra_xusb_padctl_vbus_pad_portection(port);
+	}
+
 	schedule_work(&port->usb_phy_work);
 
 	return 0;
@@ -643,6 +708,14 @@ static int tegra_xusb_set_host(struct usb_otg *otg, struct usb_bus *host)
 	return 0;
 }
 
+static enum usb_charger_type tegra_xusb_charger_detect(struct usb_phy *usb_phy)
+{
+	struct tegra_xusb_port *port = container_of(usb_phy,
+						    struct tegra_xusb_port,
+						    usb_phy);
+
+	return port->chrg_type;
+}
 
 static int tegra_xusb_setup_usb_role_switch(struct tegra_xusb_port *port)
 {
@@ -693,6 +766,9 @@ static int tegra_xusb_setup_usb_role_switch(struct tegra_xusb_port *port)
 	port->usb_phy.otg->set_peripheral = tegra_xusb_set_peripheral;
 	port->usb_phy.otg->set_host = tegra_xusb_set_host;
 
+	if (port->charger_detect)
+		port->usb_phy.charger_detect = tegra_xusb_charger_detect;
+
 	err = usb_add_phy_dev(&port->usb_phy);
 	if (err < 0) {
 		dev_err(&port->dev, "Failed to add USB PHY: %d\n", err);
@@ -727,6 +803,10 @@ static int tegra_xusb_usb2_port_parse_dt(struct tegra_xusb_usb2_port *usb2)
 		usb2->mode = USB_DR_MODE_HOST;
 	}
 
+	if (port->padctl->soc->supports_charger_detect &&
+	    of_property_read_bool(np, "nvidia,charger-detect"))
+		port->charger_detect = true;
+
 	/* usb-role-switch property is mandatory for OTG/Peripheral modes */
 	if (usb2->mode == USB_DR_MODE_PERIPHERAL ||
 	    usb2->mode == USB_DR_MODE_OTG) {
diff --git a/drivers/phy/tegra/xusb.h b/drivers/phy/tegra/xusb.h
index 475bcc6..7b9a798 100644
--- a/drivers/phy/tegra/xusb.h
+++ b/drivers/phy/tegra/xusb.h
@@ -282,6 +282,9 @@ struct tegra_xusb_port {
 	struct work_struct usb_phy_work;
 	struct usb_phy usb_phy;
 
+	bool charger_detect;
+	enum usb_charger_type chrg_type;
+
 	const struct tegra_xusb_port_ops *ops;
 };
 
@@ -306,6 +309,9 @@ struct tegra_xusb_port *
 tegra_xusb_find_port(struct tegra_xusb_padctl *padctl, const char *type,
 		     unsigned int index);
 
+enum usb_charger_type tegra_xusb_padctl_charger_detect(
+					  struct tegra_xusb_port *port);
+
 struct tegra_xusb_usb2_port {
 	struct tegra_xusb_port base;
 
@@ -430,6 +436,7 @@ struct tegra_xusb_padctl_soc {
 	unsigned int num_supplies;
 	bool supports_gen2;
 	bool need_fake_usb3_port;
+	bool supports_charger_detect;
 };
 
 struct tegra_xusb_padctl {
-- 
2.7.4

Re: [PATCH V3 6/8] phy: tegra: xusb: Add support for charger detect

[Chunfeng Yun]

On Thu, 2020-05-14 at 11:52 +0530, Nagarjuna Kristam wrote:
> Perform charger-detect operation if corresponding dt property is enabled.
> Update usb-phy with the detected charger state and max current values.
> Register charger-detect API's of usb-phy to provide needed functionalities.
> 
> Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
> ---
> V3:
>  - Allighed functions and its arguments.
>  - replaced spaced by tabs for MACRO definition allignments.
>  - Unified primary and secondary charger detect API's.
>  - Used readl_poll_timeout instead of while loop condition check for register.
>  - Fixed other comments as per inputs from Thierry.
> ---
> V2:
>  - Patch re-based.
> ---
>  drivers/phy/tegra/Makefile |   2 +-
>  drivers/phy/tegra/cd.c     | 283 +++++++++++++++++++++++++++++++++++++++++++++
>  drivers/phy/tegra/xusb.c   |  80 +++++++++++++
>  drivers/phy/tegra/xusb.h   |   7 ++
>  4 files changed, 371 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/phy/tegra/cd.c
> 
> diff --git a/drivers/phy/tegra/Makefile b/drivers/phy/tegra/Makefile
> index 89b8406..befdfc4 100644
> --- a/drivers/phy/tegra/Makefile
> +++ b/drivers/phy/tegra/Makefile
> @@ -1,7 +1,7 @@
>  # SPDX-License-Identifier: GPL-2.0-only
>  obj-$(CONFIG_PHY_TEGRA_XUSB) += phy-tegra-xusb.o
>  
> -phy-tegra-xusb-y += xusb.o
> +phy-tegra-xusb-y += xusb.o cd.o
>  phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_124_SOC) += xusb-tegra124.o
>  phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_132_SOC) += xusb-tegra124.o
>  phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_210_SOC) += xusb-tegra210.o
> diff --git a/drivers/phy/tegra/cd.c b/drivers/phy/tegra/cd.c
> new file mode 100644
> index 0000000..fddbe4c
> --- /dev/null
> +++ b/drivers/phy/tegra/cd.c
> @@ -0,0 +1,283 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2020, NVIDIA CORPORATION.  All rights reserved.
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/iopoll.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/phy/phy.h>
> +
> +#include "xusb.h"
> +
> +/* Data contact detection timeout */
> +#define TDCD_TIMEOUT_MS				400
> +
> +#define USB2_BATTERY_CHRG_OTGPADX_CTL0(x)	(0x80 + (x) * 0x40)
> +#define  PD_CHG					(1 << 0)
> +#define  VDCD_DET_FILTER_EN			(1 << 4)
> +#define  VDAT_DET				(1 << 5)
> +#define  VDAT_DET_FILTER_EN			(1 << 8)
> +#define  OP_SINK_EN				(1 << 9)
> +#define  OP_SRC_EN				(1 << 10)
> +#define  ON_SINK_EN				(1 << 11)
> +#define  ON_SRC_EN				(1 << 12)
> +#define  OP_I_SRC_EN				(1 << 13)
> +#define  ZIP_FILTER_EN				(1 << 21)
> +#define  ZIN_FILTER_EN				(1 << 25)
> +#define  DCD_DETECTED				(1 << 26)
Use BIT() ?
> +
> +#define USB2_BATTERY_CHRG_OTGPADX_CTL1(x)	(0x84 + (x) * 0x40)
> +#define  PD_VREG				(1 << 6)
> +#define  VREG_LEV(x)				(((x) & 0x3) << 7)
> +#define  VREG_DIR(x)				(((x) & 0x3) << 11)
> +#define  VREG_DIR_IN				VREG_DIR(1)
> +#define  VREG_DIR_OUT				VREG_DIR(2)
> +#define  USBOP_RPD_OVRD				(1 << 16)
> +#define  USBOP_RPD_OVRD_VAL			(1 << 17)
> +#define  USBOP_RPU_OVRD				(1 << 18)
> +#define  USBOP_RPU_OVRD_VAL			(1 << 19)
> +#define  USBON_RPD_OVRD				(1 << 20)
> +#define  USBON_RPD_OVRD_VAL			(1 << 21)
> +#define  USBON_RPU_OVRD				(1 << 22)
> +#define  USBON_RPU_OVRD_VAL			(1 << 23)
> +
> +#define XUSB_PADCTL_USB2_OTG_PADX_CTL0(x)	(0x88 + (x) * 0x40)
> +#define  USB2_OTG_PD2				(1 << 27)
> +#define  USB2_OTG_PD2_OVRD_EN			(1 << 28)
> +#define  USB2_OTG_PD_ZI				(1 << 29)
> +
> +#define XUSB_PADCTL_USB2_BATTERY_CHRG_TDCD_DBNC_TIMER_0 (0x280)
> +#define   TDCD_DBNC(x)				(((x) & 0x7ff) << 0)
> +
> +static void
> +tegra_xusb_padctl_set_debounce_time(struct tegra_xusb_padctl *padctl,
> +				    u32 debounce)

Re: [PATCH V3 6/8] phy: tegra: xusb: Add support for charger detect

[Chunfeng Yun]

On Thu, 2020-05-14 at 11:52 +0530, Nagarjuna Kristam wrote:
> Perform charger-detect operation if corresponding dt property is enabled.
> Update usb-phy with the detected charger state and max current values.
> Register charger-detect API's of usb-phy to provide needed functionalities.
> 
> Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
> ---
> V3:
>  - Allighed functions and its arguments.
>  - replaced spaced by tabs for MACRO definition allignments.
>  - Unified primary and secondary charger detect API's.
>  - Used readl_poll_timeout instead of while loop condition check for register.
>  - Fixed other comments as per inputs from Thierry.
> ---
> V2:
>  - Patch re-based.
> ---
>  drivers/phy/tegra/Makefile |   2 +-
>  drivers/phy/tegra/cd.c     | 283 +++++++++++++++++++++++++++++++++++++++++++++
>  drivers/phy/tegra/xusb.c   |  80 +++++++++++++
>  drivers/phy/tegra/xusb.h   |   7 ++
>  4 files changed, 371 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/phy/tegra/cd.c
> 
> diff --git a/drivers/phy/tegra/Makefile b/drivers/phy/tegra/Makefile
> index 89b8406..befdfc4 100644
> --- a/drivers/phy/tegra/Makefile
> +++ b/drivers/phy/tegra/Makefile
> @@ -1,7 +1,7 @@
>  # SPDX-License-Identifier: GPL-2.0-only
>  obj-$(CONFIG_PHY_TEGRA_XUSB) += phy-tegra-xusb.o
>  
> -phy-tegra-xusb-y += xusb.o
> +phy-tegra-xusb-y += xusb.o cd.o
>  phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_124_SOC) += xusb-tegra124.o
>  phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_132_SOC) += xusb-tegra124.o
>  phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_210_SOC) += xusb-tegra210.o
> diff --git a/drivers/phy/tegra/cd.c b/drivers/phy/tegra/cd.c
> new file mode 100644
> index 0000000..fddbe4c
> --- /dev/null
> +++ b/drivers/phy/tegra/cd.c
> @@ -0,0 +1,283 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2020, NVIDIA CORPORATION.  All rights reserved.
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/iopoll.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/phy/phy.h>
> +
> +#include "xusb.h"
> +
> +/* Data contact detection timeout */
> +#define TDCD_TIMEOUT_MS				400
> +
> +#define USB2_BATTERY_CHRG_OTGPADX_CTL0(x)	(0x80 + (x) * 0x40)
> +#define  PD_CHG					(1 << 0)
> +#define  VDCD_DET_FILTER_EN			(1 << 4)
> +#define  VDAT_DET				(1 << 5)
> +#define  VDAT_DET_FILTER_EN			(1 << 8)
> +#define  OP_SINK_EN				(1 << 9)
> +#define  OP_SRC_EN				(1 << 10)
> +#define  ON_SINK_EN				(1 << 11)
> +#define  ON_SRC_EN				(1 << 12)
> +#define  OP_I_SRC_EN				(1 << 13)
> +#define  ZIP_FILTER_EN				(1 << 21)
> +#define  ZIN_FILTER_EN				(1 << 25)
> +#define  DCD_DETECTED				(1 << 26)
Use BIT() ?
> +
> +#define USB2_BATTERY_CHRG_OTGPADX_CTL1(x)	(0x84 + (x) * 0x40)
> +#define  PD_VREG				(1 << 6)
> +#define  VREG_LEV(x)				(((x) & 0x3) << 7)
> +#define  VREG_DIR(x)				(((x) & 0x3) << 11)
> +#define  VREG_DIR_IN				VREG_DIR(1)
> +#define  VREG_DIR_OUT				VREG_DIR(2)
> +#define  USBOP_RPD_OVRD				(1 << 16)
> +#define  USBOP_RPD_OVRD_VAL			(1 << 17)
> +#define  USBOP_RPU_OVRD				(1 << 18)
> +#define  USBOP_RPU_OVRD_VAL			(1 << 19)
> +#define  USBON_RPD_OVRD				(1 << 20)
> +#define  USBON_RPD_OVRD_VAL			(1 << 21)
> +#define  USBON_RPU_OVRD				(1 << 22)
> +#define  USBON_RPU_OVRD_VAL			(1 << 23)
> +
> +#define XUSB_PADCTL_USB2_OTG_PADX_CTL0(x)	(0x88 + (x) * 0x40)
> +#define  USB2_OTG_PD2				(1 << 27)
> +#define  USB2_OTG_PD2_OVRD_EN			(1 << 28)
> +#define  USB2_OTG_PD_ZI				(1 << 29)
> +
> +#define XUSB_PADCTL_USB2_BATTERY_CHRG_TDCD_DBNC_TIMER_0 (0x280)
> +#define   TDCD_DBNC(x)				(((x) & 0x7ff) << 0)
> +
> +static void
> +tegra_xusb_padctl_set_debounce_time(struct tegra_xusb_padctl *padctl,
> +				    u32 debounce)

Re: [PATCH V3 6/8] phy: tegra: xusb: Add support for charger detect

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 1141 bytes --]

On Thu, May 14, 2020 at 11:52:41AM +0530, Nagarjuna Kristam wrote:
> Perform charger-detect operation if corresponding dt property is enabled.
> Update usb-phy with the detected charger state and max current values.
> Register charger-detect API's of usb-phy to provide needed functionalities.
> 
> Signed-off-by: Nagarjuna Kristam <nkristam-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
> ---
> V3:
>  - Allighed functions and its arguments.
>  - replaced spaced by tabs for MACRO definition allignments.
>  - Unified primary and secondary charger detect API's.
>  - Used readl_poll_timeout instead of while loop condition check for register.
>  - Fixed other comments as per inputs from Thierry.
> ---
> V2:
>  - Patch re-based.
> ---
>  drivers/phy/tegra/Makefile |   2 +-
>  drivers/phy/tegra/cd.c     | 283 +++++++++++++++++++++++++++++++++++++++++++++
>  drivers/phy/tegra/xusb.c   |  80 +++++++++++++
>  drivers/phy/tegra/xusb.h   |   7 ++
>  4 files changed, 371 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/phy/tegra/cd.c

Acked-by: Thierry Reding <treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH V3 6/8] phy: tegra: xusb: Add support for charger detect

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 1083 bytes --]

On Thu, May 14, 2020 at 11:52:41AM +0530, Nagarjuna Kristam wrote:
> Perform charger-detect operation if corresponding dt property is enabled.
> Update usb-phy with the detected charger state and max current values.
> Register charger-detect API's of usb-phy to provide needed functionalities.
> 
> Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
> ---
> V3:
>  - Allighed functions and its arguments.
>  - replaced spaced by tabs for MACRO definition allignments.
>  - Unified primary and secondary charger detect API's.
>  - Used readl_poll_timeout instead of while loop condition check for register.
>  - Fixed other comments as per inputs from Thierry.
> ---
> V2:
>  - Patch re-based.
> ---
>  drivers/phy/tegra/Makefile |   2 +-
>  drivers/phy/tegra/cd.c     | 283 +++++++++++++++++++++++++++++++++++++++++++++
>  drivers/phy/tegra/xusb.c   |  80 +++++++++++++
>  drivers/phy/tegra/xusb.h   |   7 ++
>  4 files changed, 371 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/phy/tegra/cd.c

Acked-by: Thierry Reding <treding@nvidia.com>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[PATCH V3 7/8] phy: tegra: xusb: Enable charger detect for Tegra186

[Nagarjuna Kristam]

Tegra186 SoC supports charger detect, set corresponding soc flag.

Signed-off-by: Nagarjuna Kristam <nkristam-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Acked-by: Thierry Reding <treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
V3:
 - Used supports_charger_detect name instead of charger_detect.
 - Added Acked-by updates to commit message.
---
V2:
 - Patch re-based.
---
 drivers/phy/tegra/xusb-tegra186.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/phy/tegra/xusb-tegra186.c b/drivers/phy/tegra/xusb-tegra186.c
index 59b78a7..da61721 100644
--- a/drivers/phy/tegra/xusb-tegra186.c
+++ b/drivers/phy/tegra/xusb-tegra186.c
@@ -1041,6 +1041,7 @@ const struct tegra_xusb_padctl_soc tegra186_xusb_padctl_soc = {
 	.ops = &tegra186_xusb_padctl_ops,
 	.supply_names = tegra186_xusb_padctl_supply_names,
 	.num_supplies = ARRAY_SIZE(tegra186_xusb_padctl_supply_names),
+	.supports_charger_detect = true,
 };
 EXPORT_SYMBOL_GPL(tegra186_xusb_padctl_soc);
 #endif
-- 
2.7.4

[PATCH V3 7/8] phy: tegra: xusb: Enable charger detect for Tegra186

[Nagarjuna Kristam]

Tegra186 SoC supports charger detect, set corresponding soc flag.

Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
---
V3:
 - Used supports_charger_detect name instead of charger_detect.
 - Added Acked-by updates to commit message.
---
V2:
 - Patch re-based.
---
 drivers/phy/tegra/xusb-tegra186.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/phy/tegra/xusb-tegra186.c b/drivers/phy/tegra/xusb-tegra186.c
index 59b78a7..da61721 100644
--- a/drivers/phy/tegra/xusb-tegra186.c
+++ b/drivers/phy/tegra/xusb-tegra186.c
@@ -1041,6 +1041,7 @@ const struct tegra_xusb_padctl_soc tegra186_xusb_padctl_soc = {
 	.ops = &tegra186_xusb_padctl_ops,
 	.supply_names = tegra186_xusb_padctl_supply_names,
 	.num_supplies = ARRAY_SIZE(tegra186_xusb_padctl_supply_names),
+	.supports_charger_detect = true,
 };
 EXPORT_SYMBOL_GPL(tegra186_xusb_padctl_soc);
 #endif
-- 
2.7.4

[PATCH V3 8/8] phy: tegra: xusb: Enable charger detect for Tegra210

[Nagarjuna Kristam]

Tegra210 SoC supports charger detect, set corresponding soc flag.

Signed-off-by: Nagarjuna Kristam <nkristam-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Acked-by: Thierry Reding <treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
V3:
 - Used supports_charger_detect name instead of charger_detect.
 - Added Acked-by updates to commit message.
---
V2:
 - Patch re-based.
---
 drivers/phy/tegra/xusb-tegra210.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/phy/tegra/xusb-tegra210.c b/drivers/phy/tegra/xusb-tegra210.c
index 80c4349..db2a1ab 100644
--- a/drivers/phy/tegra/xusb-tegra210.c
+++ b/drivers/phy/tegra/xusb-tegra210.c
@@ -2353,6 +2353,7 @@ const struct tegra_xusb_padctl_soc tegra210_xusb_padctl_soc = {
 	.supply_names = tegra210_xusb_padctl_supply_names,
 	.num_supplies = ARRAY_SIZE(tegra210_xusb_padctl_supply_names),
 	.need_fake_usb3_port = true,
+	.supports_charger_detect = true,
 };
 EXPORT_SYMBOL_GPL(tegra210_xusb_padctl_soc);
 
-- 
2.7.4

[PATCH V3 8/8] phy: tegra: xusb: Enable charger detect for Tegra210

[Nagarjuna Kristam]

Tegra210 SoC supports charger detect, set corresponding soc flag.

Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
---
V3:
 - Used supports_charger_detect name instead of charger_detect.
 - Added Acked-by updates to commit message.
---
V2:
 - Patch re-based.
---
 drivers/phy/tegra/xusb-tegra210.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/phy/tegra/xusb-tegra210.c b/drivers/phy/tegra/xusb-tegra210.c
index 80c4349..db2a1ab 100644
--- a/drivers/phy/tegra/xusb-tegra210.c
+++ b/drivers/phy/tegra/xusb-tegra210.c
@@ -2353,6 +2353,7 @@ const struct tegra_xusb_padctl_soc tegra210_xusb_padctl_soc = {
 	.supply_names = tegra210_xusb_padctl_supply_names,
 	.num_supplies = ARRAY_SIZE(tegra210_xusb_padctl_supply_names),
 	.need_fake_usb3_port = true,
+	.supports_charger_detect = true,
 };
 EXPORT_SYMBOL_GPL(tegra210_xusb_padctl_soc);
 
-- 
2.7.4

Re: [PATCH V3 0/8] Tegra XUSB charger detect support

[Felipe Balbi]

[-- Attachment #1: Type: text/plain, Size: 1725 bytes --]

Nagarjuna Kristam <nkristam-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> writes:

> This patch series adds charger detect support on XUSB hardware used in
> Tegra210 and Tegra186 SoCs.
>
> This patchset is composed with :
>  - dt bindings of XUSB Pad Controller
>  - Tegra XUSB device mode driver to add vbus_draw support 
>  - Tegra PHY driver for charger detect support
>
> Tests done:
>  - Connect USB cable from ubuntu host to micro-B port of DUT to detect
>    SDP_TYPE charger
>  - Connect USB cable from external powered USB hub(which inturn connects
>    to ubuntu host) to micro-B port of DUT to detect CDP_TYPE charger.
>  - Connect USB cable from USB charger to micro-B port of DUT to detect
>    DCP_TYPE charger.
> DUT: Jetson-tx1, Jetson tx2.
>
> V3:
>  - Added ACKed-by details for PHY driver and DT changes.
>  - Functions and its arguments are aligned.
>  - Tabs are used for alignment of MACRO's
>  - For vbus_draw USDC callback, usb_phy set_power error is propogated.
>  - Fixed various comments given by thierry.
> V2:
>  - Added ACKed-by details for DT patches.
>  - All patches rebased.
>
> Nagarjuna Kristam (8):
>   dt-bindings: phy: tegra-xusb: Add charger-detect property
>   usb: gadget: tegra-xudc: Add vbus_draw support
>   phy: tegra: xusb: Add support for UTMI pad power control
>   phy: tegra: xusb: Add USB2 pad power control support for Tegra210
>   phy: tegra: xusb: Add soc ops API to enable UTMI PAD protection
>   phy: tegra: xusb: Add support for charger detect
>   phy: tegra: xusb: Enable charger detect for Tegra186
>   phy: tegra: xusb: Enable charger detect for Tegra210

Is there a hard-dependency between gadget and phy patches?

-- 
balbi

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]

Re: [PATCH V3 0/8] Tegra XUSB charger detect support

[Felipe Balbi]

[-- Attachment #1: Type: text/plain, Size: 1696 bytes --]

Nagarjuna Kristam <nkristam@nvidia.com> writes:

> This patch series adds charger detect support on XUSB hardware used in
> Tegra210 and Tegra186 SoCs.
>
> This patchset is composed with :
>  - dt bindings of XUSB Pad Controller
>  - Tegra XUSB device mode driver to add vbus_draw support 
>  - Tegra PHY driver for charger detect support
>
> Tests done:
>  - Connect USB cable from ubuntu host to micro-B port of DUT to detect
>    SDP_TYPE charger
>  - Connect USB cable from external powered USB hub(which inturn connects
>    to ubuntu host) to micro-B port of DUT to detect CDP_TYPE charger.
>  - Connect USB cable from USB charger to micro-B port of DUT to detect
>    DCP_TYPE charger.
> DUT: Jetson-tx1, Jetson tx2.
>
> V3:
>  - Added ACKed-by details for PHY driver and DT changes.
>  - Functions and its arguments are aligned.
>  - Tabs are used for alignment of MACRO's
>  - For vbus_draw USDC callback, usb_phy set_power error is propogated.
>  - Fixed various comments given by thierry.
> V2:
>  - Added ACKed-by details for DT patches.
>  - All patches rebased.
>
> Nagarjuna Kristam (8):
>   dt-bindings: phy: tegra-xusb: Add charger-detect property
>   usb: gadget: tegra-xudc: Add vbus_draw support
>   phy: tegra: xusb: Add support for UTMI pad power control
>   phy: tegra: xusb: Add USB2 pad power control support for Tegra210
>   phy: tegra: xusb: Add soc ops API to enable UTMI PAD protection
>   phy: tegra: xusb: Add support for charger detect
>   phy: tegra: xusb: Enable charger detect for Tegra186
>   phy: tegra: xusb: Enable charger detect for Tegra210

Is there a hard-dependency between gadget and phy patches?

-- 
balbi

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]

Re: [PATCH V3 0/8] Tegra XUSB charger detect support

[Nagarjuna Kristam]

On 14-05-2020 15:09, Felipe Balbi wrote:
> Nagarjuna Kristam<nkristam-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>  writes:
> 
>> This patch series adds charger detect support on XUSB hardware used in
>> Tegra210 and Tegra186 SoCs.
>>
>> This patchset is composed with :
>>   - dt bindings of XUSB Pad Controller
>>   - Tegra XUSB device mode driver to add vbus_draw support
>>   - Tegra PHY driver for charger detect support
>>
>> Tests done:
>>   - Connect USB cable from ubuntu host to micro-B port of DUT to detect
>>     SDP_TYPE charger
>>   - Connect USB cable from external powered USB hub(which inturn connects
>>     to ubuntu host) to micro-B port of DUT to detect CDP_TYPE charger.
>>   - Connect USB cable from USB charger to micro-B port of DUT to detect
>>     DCP_TYPE charger.
>> DUT: Jetson-tx1, Jetson tx2.
>>
>> V3:
>>   - Added ACKed-by details for PHY driver and DT changes.
>>   - Functions and its arguments are aligned.
>>   - Tabs are used for alignment of MACRO's
>>   - For vbus_draw USDC callback, usb_phy set_power error is propogated.
>>   - Fixed various comments given by thierry.
>> V2:
>>   - Added ACKed-by details for DT patches.
>>   - All patches rebased.
>>
>> Nagarjuna Kristam (8):
>>    dt-bindings: phy: tegra-xusb: Add charger-detect property
>>    usb: gadget: tegra-xudc: Add vbus_draw support
>>    phy: tegra: xusb: Add support for UTMI pad power control
>>    phy: tegra: xusb: Add USB2 pad power control support for Tegra210
>>    phy: tegra: xusb: Add soc ops API to enable UTMI PAD protection
>>    phy: tegra: xusb: Add support for charger detect
>>    phy: tegra: xusb: Enable charger detect for Tegra186
>>    phy: tegra: xusb: Enable charger detect for Tegra210
> Is there a hard-dependency between gadget and phy patches?
> 
> -- balbiNo dependency. They can be merged independently.

- Nagarjuna

Re: [PATCH V3 0/8] Tegra XUSB charger detect support

[Nagarjuna Kristam]

On 14-05-2020 15:09, Felipe Balbi wrote:
> Nagarjuna Kristam<nkristam@nvidia.com>  writes:
> 
>> This patch series adds charger detect support on XUSB hardware used in
>> Tegra210 and Tegra186 SoCs.
>>
>> This patchset is composed with :
>>   - dt bindings of XUSB Pad Controller
>>   - Tegra XUSB device mode driver to add vbus_draw support
>>   - Tegra PHY driver for charger detect support
>>
>> Tests done:
>>   - Connect USB cable from ubuntu host to micro-B port of DUT to detect
>>     SDP_TYPE charger
>>   - Connect USB cable from external powered USB hub(which inturn connects
>>     to ubuntu host) to micro-B port of DUT to detect CDP_TYPE charger.
>>   - Connect USB cable from USB charger to micro-B port of DUT to detect
>>     DCP_TYPE charger.
>> DUT: Jetson-tx1, Jetson tx2.
>>
>> V3:
>>   - Added ACKed-by details for PHY driver and DT changes.
>>   - Functions and its arguments are aligned.
>>   - Tabs are used for alignment of MACRO's
>>   - For vbus_draw USDC callback, usb_phy set_power error is propogated.
>>   - Fixed various comments given by thierry.
>> V2:
>>   - Added ACKed-by details for DT patches.
>>   - All patches rebased.
>>
>> Nagarjuna Kristam (8):
>>    dt-bindings: phy: tegra-xusb: Add charger-detect property
>>    usb: gadget: tegra-xudc: Add vbus_draw support
>>    phy: tegra: xusb: Add support for UTMI pad power control
>>    phy: tegra: xusb: Add USB2 pad power control support for Tegra210
>>    phy: tegra: xusb: Add soc ops API to enable UTMI PAD protection
>>    phy: tegra: xusb: Add support for charger detect
>>    phy: tegra: xusb: Enable charger detect for Tegra186
>>    phy: tegra: xusb: Enable charger detect for Tegra210
> Is there a hard-dependency between gadget and phy patches?
> 
> -- balbiNo dependency. They can be merged independently.

- Nagarjuna