[PATCH V1 net-next 00/15] ENA features and cosmetic changes

[PATCH V1 net-next 00/15] ENA features and cosmetic changes

[akiyano]

From: Arthur Kiyanovski <akiyano@amazon.com>

This patchset includes:
1. new rx offset feature
2. reduction of the driver load time
3. error prints
4. multiple cosmetic changes to the code 

Arthur Kiyanovski (15):
  net: ena: add support for the rx offset feature
  net: ena: rename ena_com_free_desc to make API more uniform
  net: ena: use explicit variable size for clarity
  net: ena: fix ena_com_comp_status_to_errno() return value
  net: ena: add prints to failed commands
  net: ena: simplify ena_com_update_intr_delay_resolution()
  net: ena: cosmetic: rename ena_update_tx/rx_rings_intr_moderation()
  net: ena: cosmetic: set queue sizes to u32 for consistency
  net: ena: cosmetic: fix spelling and grammar mistakes in comments
  net: ena: cosmetic: fix line break issues
  net: ena: cosmetic: remove unnecessary code
  net: ena: cosmetic: code reorderings
  net: ena: cosmetic: fix spacing issues
  net: ena: cosmetic: minor code changes
  net: ena: reduce driver load time

 .../net/ethernet/amazon/ena/ena_admin_defs.h  | 11 ++-
 drivers/net/ethernet/amazon/ena/ena_com.c     | 85 ++++++++++---------
 drivers/net/ethernet/amazon/ena/ena_com.h     | 35 ++++----
 .../net/ethernet/amazon/ena/ena_common_defs.h |  2 +-
 drivers/net/ethernet/amazon/ena/ena_eth_com.c | 50 +++++++----
 drivers/net/ethernet/amazon/ena/ena_eth_com.h |  7 +-
 .../net/ethernet/amazon/ena/ena_eth_io_defs.h |  6 +-
 drivers/net/ethernet/amazon/ena/ena_ethtool.c | 19 ++---
 drivers/net/ethernet/amazon/ena/ena_netdev.c  | 39 +++++----
 drivers/net/ethernet/amazon/ena/ena_netdev.h  | 10 +--
 .../net/ethernet/amazon/ena/ena_regs_defs.h   |  2 +-
 11 files changed, 150 insertions(+), 116 deletions(-)

-- 
2.23.1

[PATCH V1 net-next 01/15] net: ena: add support for the rx offset feature

[akiyano]

From: Arthur Kiyanovski <akiyano@amazon.com>

Newer ENA devices can write data to rx buffers with an offset
from the beginning of the buffer.

This commit adds support for this feature in the driver.

Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
---
 .../net/ethernet/amazon/ena/ena_admin_defs.h   |  5 ++++-
 drivers/net/ethernet/amazon/ena/ena_eth_com.c  | 18 ++++++++++++------
 drivers/net/ethernet/amazon/ena/ena_eth_com.h  |  1 +
 .../net/ethernet/amazon/ena/ena_eth_io_defs.h  |  4 +++-
 drivers/net/ethernet/amazon/ena/ena_netdev.c   |  8 ++++++++
 5 files changed, 28 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/amazon/ena/ena_admin_defs.h b/drivers/net/ethernet/amazon/ena/ena_admin_defs.h
index 7be3dcbf3d16..727836f638ad 100644
--- a/drivers/net/ethernet/amazon/ena/ena_admin_defs.h
+++ b/drivers/net/ethernet/amazon/ena/ena_admin_defs.h
@@ -813,7 +813,8 @@ struct ena_admin_host_info {
 
 	u16 reserved;
 
-	/* 1 :0 : reserved
+	/* 0 : reserved
+	 * 1 : rx_offset
 	 * 2 : interrupt_moderation
 	 * 31:3 : reserved
 	 */
@@ -1124,6 +1125,8 @@ struct ena_admin_ena_mmio_req_read_less_resp {
 #define ENA_ADMIN_HOST_INFO_DEVICE_MASK                     GENMASK(7, 3)
 #define ENA_ADMIN_HOST_INFO_BUS_SHIFT                       8
 #define ENA_ADMIN_HOST_INFO_BUS_MASK                        GENMASK(15, 8)
+#define ENA_ADMIN_HOST_INFO_RX_OFFSET_SHIFT                 1
+#define ENA_ADMIN_HOST_INFO_RX_OFFSET_MASK                  BIT(1)
 #define ENA_ADMIN_HOST_INFO_INTERRUPT_MODERATION_SHIFT      2
 #define ENA_ADMIN_HOST_INFO_INTERRUPT_MODERATION_MASK       BIT(2)
 
diff --git a/drivers/net/ethernet/amazon/ena/ena_eth_com.c b/drivers/net/ethernet/amazon/ena/ena_eth_com.c
index 2845ac277724..a014f514c069 100644
--- a/drivers/net/ethernet/amazon/ena/ena_eth_com.c
+++ b/drivers/net/ethernet/amazon/ena/ena_eth_com.c
@@ -519,7 +519,7 @@ int ena_com_rx_pkt(struct ena_com_io_cq *io_cq,
 	struct ena_eth_io_rx_cdesc_base *cdesc = NULL;
 	u16 cdesc_idx = 0;
 	u16 nb_hw_desc;
-	u16 i;
+	u16 i = 0;
 
 	WARN(io_cq->direction != ENA_COM_IO_QUEUE_DIRECTION_RX, "wrong Q type");
 
@@ -538,13 +538,19 @@ int ena_com_rx_pkt(struct ena_com_io_cq *io_cq,
 		return -ENOSPC;
 	}
 
-	for (i = 0; i < nb_hw_desc; i++) {
+	cdesc = ena_com_rx_cdesc_idx_to_ptr(io_cq, cdesc_idx);
+	ena_rx_ctx->pkt_offset = cdesc->offset;
+
+	do {
+		ena_buf[i].len = cdesc->length;
+		ena_buf[i].req_id = cdesc->req_id;
+
+		if (++i >= nb_hw_desc)
+			break;
+
 		cdesc = ena_com_rx_cdesc_idx_to_ptr(io_cq, cdesc_idx + i);
 
-		ena_buf->len = cdesc->length;
-		ena_buf->req_id = cdesc->req_id;
-		ena_buf++;
-	}
+	} while (1);
 
 	/* Update SQ head ptr */
 	io_sq->next_to_comp += nb_hw_desc;
diff --git a/drivers/net/ethernet/amazon/ena/ena_eth_com.h b/drivers/net/ethernet/amazon/ena/ena_eth_com.h
index 77986c0ea52c..9834b5cdb655 100644
--- a/drivers/net/ethernet/amazon/ena/ena_eth_com.h
+++ b/drivers/net/ethernet/amazon/ena/ena_eth_com.h
@@ -73,6 +73,7 @@ struct ena_com_rx_ctx {
 	u32 hash;
 	u16 descs;
 	int max_bufs;
+	u8 pkt_offset;
 };
 
 int ena_com_prepare_tx(struct ena_com_io_sq *io_sq,
diff --git a/drivers/net/ethernet/amazon/ena/ena_eth_io_defs.h b/drivers/net/ethernet/amazon/ena/ena_eth_io_defs.h
index 00e0f056a741..ee28fb067d8c 100644
--- a/drivers/net/ethernet/amazon/ena/ena_eth_io_defs.h
+++ b/drivers/net/ethernet/amazon/ena/ena_eth_io_defs.h
@@ -264,7 +264,9 @@ struct ena_eth_io_rx_cdesc_base {
 
 	u16 sub_qid;
 
-	u16 reserved;
+	u8 offset;
+
+	u8 reserved;
 };
 
 /* 8-word format */
diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.c b/drivers/net/ethernet/amazon/ena/ena_netdev.c
index 85b87ed02dd5..33578297dc56 100644
--- a/drivers/net/ethernet/amazon/ena/ena_netdev.c
+++ b/drivers/net/ethernet/amazon/ena/ena_netdev.c
@@ -1435,6 +1435,8 @@ static struct sk_buff *ena_rx_skb(struct ena_ring *rx_ring,
 
 		skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, rx_info->page,
 				rx_info->page_offset, len, ENA_PAGE_SIZE);
+		/* The offset is non zero only for the first buffer */
+		rx_info->page_offset = 0;
 
 		netif_dbg(rx_ring->adapter, rx_status, rx_ring->netdev,
 			  "rx skb updated. len %d. data_len %d\n",
@@ -1590,6 +1592,7 @@ static int ena_clean_rx_irq(struct ena_ring *rx_ring, struct napi_struct *napi,
 {
 	u16 next_to_clean = rx_ring->next_to_clean;
 	struct ena_com_rx_ctx ena_rx_ctx;
+	struct ena_rx_buffer *rx_info;
 	struct ena_adapter *adapter;
 	u32 res_budget, work_done;
 	int rx_copybreak_pkt = 0;
@@ -1614,6 +1617,7 @@ static int ena_clean_rx_irq(struct ena_ring *rx_ring, struct napi_struct *napi,
 		ena_rx_ctx.ena_bufs = rx_ring->ena_bufs;
 		ena_rx_ctx.max_bufs = rx_ring->sgl_size;
 		ena_rx_ctx.descs = 0;
+		ena_rx_ctx.pkt_offset = 0;
 		rc = ena_com_rx_pkt(rx_ring->ena_com_io_cq,
 				    rx_ring->ena_com_io_sq,
 				    &ena_rx_ctx);
@@ -1623,6 +1627,9 @@ static int ena_clean_rx_irq(struct ena_ring *rx_ring, struct napi_struct *napi,
 		if (unlikely(ena_rx_ctx.descs == 0))
 			break;
 
+		rx_info = &rx_ring->rx_buffer_info[rx_ring->ena_bufs[0].req_id];
+		rx_info->page_offset = ena_rx_ctx.pkt_offset;
+
 		netif_dbg(rx_ring->adapter, rx_status, rx_ring->netdev,
 			  "rx_poll: q %d got packet from ena. descs #: %d l3 proto %d l4 proto %d hash: %x\n",
 			  rx_ring->qid, ena_rx_ctx.descs, ena_rx_ctx.l3_proto,
@@ -3111,6 +3118,7 @@ static void ena_config_host_info(struct ena_com_dev *ena_dev,
 	host_info->num_cpus = num_online_cpus();
 
 	host_info->driver_supported_features =
+		ENA_ADMIN_HOST_INFO_RX_OFFSET_MASK |
 		ENA_ADMIN_HOST_INFO_INTERRUPT_MODERATION_MASK;
 
 	rc = ena_com_set_host_attributes(ena_dev);
-- 
2.23.1

[PATCH V1 net-next 02/15] net: ena: rename ena_com_free_desc to make API more uniform

[akiyano]

From: Arthur Kiyanovski <akiyano@amazon.com>

Rename ena_com_free_desc to ena_com_free_q_entries to match
the LLQ mode.

In non-LLQ mode, an entry in an IO ring corresponds to a
a descriptor. In LLQ mode an entry may correspond to several
descriptors (per LLQ definition).

Signed-off-by: Igor Chauskin <igorch@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
---
 drivers/net/ethernet/amazon/ena/ena_eth_com.h | 6 +++---
 drivers/net/ethernet/amazon/ena/ena_netdev.c  | 5 ++---
 2 files changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/amazon/ena/ena_eth_com.h b/drivers/net/ethernet/amazon/ena/ena_eth_com.h
index 9834b5cdb655..8b1afd3b32f2 100644
--- a/drivers/net/ethernet/amazon/ena/ena_eth_com.h
+++ b/drivers/net/ethernet/amazon/ena/ena_eth_com.h
@@ -96,7 +96,7 @@ static inline void ena_com_unmask_intr(struct ena_com_io_cq *io_cq,
 	writel(intr_reg->intr_control, io_cq->unmask_reg);
 }
 
-static inline int ena_com_free_desc(struct ena_com_io_sq *io_sq)
+static inline int ena_com_free_q_entries(struct ena_com_io_sq *io_sq)
 {
 	u16 tail, next_to_comp, cnt;
 
@@ -114,7 +114,7 @@ static inline bool ena_com_sq_have_enough_space(struct ena_com_io_sq *io_sq,
 	int temp;
 
 	if (io_sq->mem_queue_type == ENA_ADMIN_PLACEMENT_POLICY_HOST)
-		return ena_com_free_desc(io_sq) >= required_buffers;
+		return ena_com_free_q_entries(io_sq) >= required_buffers;
 
 	/* This calculation doesn't need to be 100% accurate. So to reduce
 	 * the calculation overhead just Subtract 2 lines from the free descs
@@ -123,7 +123,7 @@ static inline bool ena_com_sq_have_enough_space(struct ena_com_io_sq *io_sq,
 	 */
 	temp = required_buffers / io_sq->llq_info.descs_per_entry + 2;
 
-	return ena_com_free_desc(io_sq) > temp;
+	return ena_com_free_q_entries(io_sq) > temp;
 }
 
 static inline bool ena_com_meta_desc_changed(struct ena_com_io_sq *io_sq,
diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.c b/drivers/net/ethernet/amazon/ena/ena_netdev.c
index 33578297dc56..c3cbe48b353e 100644
--- a/drivers/net/ethernet/amazon/ena/ena_netdev.c
+++ b/drivers/net/ethernet/amazon/ena/ena_netdev.c
@@ -1691,7 +1691,7 @@ static int ena_clean_rx_irq(struct ena_ring *rx_ring, struct napi_struct *napi,
 
 	rx_ring->next_to_clean = next_to_clean;
 
-	refill_required = ena_com_free_desc(rx_ring->ena_com_io_sq);
+	refill_required = ena_com_free_q_entries(rx_ring->ena_com_io_sq);
 	refill_threshold =
 		min_t(int, rx_ring->ring_size / ENA_RX_REFILL_THRESH_DIVIDER,
 		      ENA_RX_REFILL_THRESH_PACKET);
@@ -3694,8 +3694,7 @@ static void check_for_empty_rx_ring(struct ena_adapter *adapter)
 	for (i = 0; i < adapter->num_io_queues; i++) {
 		rx_ring = &adapter->rx_ring[i];
 
-		refill_required =
-			ena_com_free_desc(rx_ring->ena_com_io_sq);
+		refill_required = ena_com_free_q_entries(rx_ring->ena_com_io_sq);
 		if (unlikely(refill_required == (rx_ring->ring_size - 1))) {
 			rx_ring->empty_rx_queue++;
 
-- 
2.23.1

[PATCH V1 net-next 03/15] net: ena: use explicit variable size for clarity

[akiyano]

From: Arthur Kiyanovski <akiyano@amazon.com>

Use u64 instead of unsigned long long for clarity

Signed-off-by: Shai Brandes <shaibran@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
---
 drivers/net/ethernet/amazon/ena/ena_com.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/amazon/ena/ena_com.c b/drivers/net/ethernet/amazon/ena/ena_com.c
index b51bf62af11b..02780f9fa586 100644
--- a/drivers/net/ethernet/amazon/ena/ena_com.c
+++ b/drivers/net/ethernet/amazon/ena/ena_com.c
@@ -2003,7 +2003,7 @@ void ena_com_aenq_intr_handler(struct ena_com_dev *dev, void *data)
 	struct ena_admin_aenq_entry *aenq_e;
 	struct ena_admin_aenq_common_desc *aenq_common;
 	struct ena_com_aenq *aenq  = &dev->aenq;
-	unsigned long long timestamp;
+	u64 timestamp;
 	ena_aenq_handler handler_cb;
 	u16 masked_head, processed = 0;
 	u8 phase;
@@ -2021,9 +2021,8 @@ void ena_com_aenq_intr_handler(struct ena_com_dev *dev, void *data)
 		 */
 		dma_rmb();
 
-		timestamp =
-			(unsigned long long)aenq_common->timestamp_low |
-			((unsigned long long)aenq_common->timestamp_high << 32);
+		timestamp = (u64)aenq_common->timestamp_low |
+			    ((u64)aenq_common->timestamp_high << 32);
 		pr_debug("AENQ! Group[%x] Syndrom[%x] timestamp: [%llus]\n",
 			 aenq_common->group, aenq_common->syndrom, timestamp);
 
-- 
2.23.1

[PATCH V1 net-next 04/15] net: ena: fix ena_com_comp_status_to_errno() return value

[akiyano]

From: Arthur Kiyanovski <akiyano@amazon.com>

Default return value should be -EINVAL since the input
in this case was unexpected.
Also remove the now redundant check in the beginning
of the function.

Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
---
 drivers/net/ethernet/amazon/ena/ena_com.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/amazon/ena/ena_com.c b/drivers/net/ethernet/amazon/ena/ena_com.c
index 02780f9fa586..921945dace22 100644
--- a/drivers/net/ethernet/amazon/ena/ena_com.c
+++ b/drivers/net/ethernet/amazon/ena/ena_com.c
@@ -523,9 +523,6 @@ static int ena_com_comp_status_to_errno(u8 comp_status)
 	if (unlikely(comp_status != 0))
 		pr_err("admin command failed[%u]\n", comp_status);
 
-	if (unlikely(comp_status > ENA_ADMIN_UNKNOWN_ERROR))
-		return -EINVAL;
-
 	switch (comp_status) {
 	case ENA_ADMIN_SUCCESS:
 		return 0;
@@ -540,7 +537,7 @@ static int ena_com_comp_status_to_errno(u8 comp_status)
 		return -EINVAL;
 	}
 
-	return 0;
+	return -EINVAL;
 }
 
 static int ena_com_wait_and_process_admin_cq_polling(struct ena_comp_ctx *comp_ctx,
-- 
2.23.1

[PATCH V1 net-next 05/15] net: ena: add prints to failed commands

[akiyano]

From: Arthur Kiyanovski <akiyano@amazon.com>

Error prints were added to provide some context to
what the driver did when receiving this error (e.g.
trying to update metadata when receiving a PCI write error).

The prints were only added to places where the connection
between the failed function, and the requested operation is
not clear.

Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
---
 drivers/net/ethernet/amazon/ena/ena_eth_com.c | 24 +++++++++++++++----
 1 file changed, 19 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/amazon/ena/ena_eth_com.c b/drivers/net/ethernet/amazon/ena/ena_eth_com.c
index a014f514c069..f0b90e1551a3 100644
--- a/drivers/net/ethernet/amazon/ena/ena_eth_com.c
+++ b/drivers/net/ethernet/amazon/ena/ena_eth_com.c
@@ -175,8 +175,10 @@ static int ena_com_close_bounce_buffer(struct ena_com_io_sq *io_sq)
 	if (pkt_ctrl->idx) {
 		rc = ena_com_write_bounce_buffer_to_dev(io_sq,
 							pkt_ctrl->curr_bounce_buf);
-		if (unlikely(rc))
+		if (unlikely(rc)) {
+			pr_err("failed to write bounce buffer to device\n");
 			return rc;
+		}
 
 		pkt_ctrl->curr_bounce_buf =
 			ena_com_get_next_bounce_buffer(&io_sq->bounce_buf_ctrl);
@@ -206,8 +208,10 @@ static int ena_com_sq_update_llq_tail(struct ena_com_io_sq *io_sq)
 	if (!pkt_ctrl->descs_left_in_line) {
 		rc = ena_com_write_bounce_buffer_to_dev(io_sq,
 							pkt_ctrl->curr_bounce_buf);
-		if (unlikely(rc))
+		if (unlikely(rc)) {
+			pr_err("failed to write bounce buffer to device\n");
 			return rc;
+		}
 
 		pkt_ctrl->curr_bounce_buf =
 			ena_com_get_next_bounce_buffer(&io_sq->bounce_buf_ctrl);
@@ -395,8 +399,10 @@ int ena_com_prepare_tx(struct ena_com_io_sq *io_sq,
 	}
 
 	if (unlikely(io_sq->mem_queue_type == ENA_ADMIN_PLACEMENT_POLICY_DEV &&
-		     !buffer_to_push))
+		     !buffer_to_push)) {
+		pr_err("push header wasn't provided on LLQ mode\n");
 		return -EINVAL;
+	}
 
 	rc = ena_com_write_header_to_bounce(io_sq, buffer_to_push, header_len);
 	if (unlikely(rc))
@@ -413,6 +419,8 @@ int ena_com_prepare_tx(struct ena_com_io_sq *io_sq,
 	/* If the caller doesn't want to send packets */
 	if (unlikely(!num_bufs && !header_len)) {
 		rc = ena_com_close_bounce_buffer(io_sq);
+		if (rc)
+			pr_err("failed to write buffers to LLQ\n");
 		*nb_hw_desc = io_sq->tail - start_tail;
 		return rc;
 	}
@@ -472,8 +480,10 @@ int ena_com_prepare_tx(struct ena_com_io_sq *io_sq,
 		/* The first desc share the same desc as the header */
 		if (likely(i != 0)) {
 			rc = ena_com_sq_update_tail(io_sq);
-			if (unlikely(rc))
+			if (unlikely(rc)) {
+				pr_err("failed to update sq tail\n");
 				return rc;
+			}
 
 			desc = get_sq_desc(io_sq);
 			if (unlikely(!desc))
@@ -502,10 +512,14 @@ int ena_com_prepare_tx(struct ena_com_io_sq *io_sq,
 	desc->len_ctrl |= ENA_ETH_IO_TX_DESC_LAST_MASK;
 
 	rc = ena_com_sq_update_tail(io_sq);
-	if (unlikely(rc))
+	if (unlikely(rc)) {
+		pr_err("failed to update sq tail of the last descriptor\n");
 		return rc;
+	}
 
 	rc = ena_com_close_bounce_buffer(io_sq);
+	if (unlikely(rc))
+		pr_err("failed when closing bounce buffer\n");
 
 	*nb_hw_desc = io_sq->tail - start_tail;
 	return rc;
-- 
2.23.1

[PATCH V1 net-next 06/15] net: ena: simplify ena_com_update_intr_delay_resolution()

[akiyano]

From: Arthur Kiyanovski <akiyano@amazon.com>

Initialize prev_intr_delay_resolution with ena_dev->intr_delay_resolution
unconditionally, since it is initialized with
ENA_DEFAULT_INTR_DELAY_RESOLUTION in ena_probe(). This approach makes much
more sense than handling errors of not initializing it.

Also added unlikely to if condition.

Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
---
 drivers/net/ethernet/amazon/ena/ena_com.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/amazon/ena/ena_com.c b/drivers/net/ethernet/amazon/ena/ena_com.c
index 921945dace22..e2025eb86984 100644
--- a/drivers/net/ethernet/amazon/ena/ena_com.c
+++ b/drivers/net/ethernet/amazon/ena/ena_com.c
@@ -1281,13 +1281,9 @@ static int ena_com_ind_tbl_convert_to_device(struct ena_com_dev *ena_dev)
 static void ena_com_update_intr_delay_resolution(struct ena_com_dev *ena_dev,
 						 u16 intr_delay_resolution)
 {
-	/* Initial value of intr_delay_resolution might be 0 */
-	u16 prev_intr_delay_resolution =
-		ena_dev->intr_delay_resolution ?
-		ena_dev->intr_delay_resolution :
-		ENA_DEFAULT_INTR_DELAY_RESOLUTION;
+	u16 prev_intr_delay_resolution = ena_dev->intr_delay_resolution;
 
-	if (!intr_delay_resolution) {
+	if (unlikely(!intr_delay_resolution)) {
 		pr_err("Illegal intr_delay_resolution provided. Going to use default 1 usec resolution\n");
 		intr_delay_resolution = ENA_DEFAULT_INTR_DELAY_RESOLUTION;
 	}
-- 
2.23.1

[PATCH V1 net-next 07/15] net: ena: cosmetic: rename ena_update_tx/rx_rings_intr_moderation()

[akiyano]

From: Arthur Kiyanovski <akiyano@amazon.com>

Rename ena_update_tx/rx_rings_intr_moderation() to
ena_update_tx/rx_rings_nonadaptive_intr_moderation()
to distinguish between adaptive and non adaptive interrupt moderaion.

Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
---
 drivers/net/ethernet/amazon/ena/ena_ethtool.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/amazon/ena/ena_ethtool.c b/drivers/net/ethernet/amazon/ena/ena_ethtool.c
index 830d3711d6ee..ca13efa13b63 100644
--- a/drivers/net/ethernet/amazon/ena/ena_ethtool.c
+++ b/drivers/net/ethernet/amazon/ena/ena_ethtool.c
@@ -326,7 +326,7 @@ static int ena_get_coalesce(struct net_device *net_dev,
 	return 0;
 }
 
-static void ena_update_tx_rings_intr_moderation(struct ena_adapter *adapter)
+static void ena_update_tx_rings_nonadaptive_intr_moderation(struct ena_adapter *adapter)
 {
 	unsigned int val;
 	int i;
@@ -337,7 +337,7 @@ static void ena_update_tx_rings_intr_moderation(struct ena_adapter *adapter)
 		adapter->tx_ring[i].smoothed_interval = val;
 }
 
-static void ena_update_rx_rings_intr_moderation(struct ena_adapter *adapter)
+static void ena_update_rx_rings_nonadaptive_intr_moderation(struct ena_adapter *adapter)
 {
 	unsigned int val;
 	int i;
@@ -365,14 +365,14 @@ static int ena_set_coalesce(struct net_device *net_dev,
 	if (rc)
 		return rc;
 
-	ena_update_tx_rings_intr_moderation(adapter);
+	ena_update_tx_rings_nonadaptive_intr_moderation(adapter);
 
 	rc = ena_com_update_nonadaptive_moderation_interval_rx(ena_dev,
 							       coalesce->rx_coalesce_usecs);
 	if (rc)
 		return rc;
 
-	ena_update_rx_rings_intr_moderation(adapter);
+	ena_update_rx_rings_nonadaptive_intr_moderation(adapter);
 
 	if (coalesce->use_adaptive_rx_coalesce &&
 	    !ena_com_get_adaptive_moderation_enabled(ena_dev))
-- 
2.23.1

[PATCH V1 net-next 08/15] net: ena: cosmetic: set queue sizes to u32 for consistency

[akiyano]

From: Arthur Kiyanovski <akiyano@amazon.com>

Make all types of variables that convey the number and sizeof queues to
be u32, for consistency with the API between the driver and device via
ena_admin_defs.h:ena_admin_get_feat_resp.max_queue_ext fields. Current
code sometimes uses int and there are multiple assignments between these
variables with different types.

Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
---
 drivers/net/ethernet/amazon/ena/ena_netdev.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.c b/drivers/net/ethernet/amazon/ena/ena_netdev.c
index c3cbe48b353e..0999fe3310fb 100644
--- a/drivers/net/ethernet/amazon/ena/ena_netdev.c
+++ b/drivers/net/ethernet/amazon/ena/ena_netdev.c
@@ -3832,11 +3832,11 @@ static void ena_timer_service(struct timer_list *t)
 	mod_timer(&adapter->timer_service, round_jiffies(jiffies + HZ));
 }
 
-static int ena_calc_max_io_queue_num(struct pci_dev *pdev,
+static u32 ena_calc_max_io_queue_num(struct pci_dev *pdev,
 				     struct ena_com_dev *ena_dev,
 				     struct ena_com_dev_get_features_ctx *get_feat_ctx)
 {
-	int io_tx_sq_num, io_tx_cq_num, io_rx_num, max_num_io_queues;
+	u32 io_tx_sq_num, io_tx_cq_num, io_rx_num, max_num_io_queues;
 
 	if (ena_dev->supported_features & BIT(ENA_ADMIN_MAX_QUEUES_EXT)) {
 		struct ena_admin_queue_ext_feature_fields *max_queue_ext =
-- 
2.23.1

[PATCH V1 net-next 09/15] net: ena: cosmetic: fix spelling and grammar mistakes in comments

[akiyano]

From: Arthur Kiyanovski <akiyano@amazon.com>

fix spelling and grammar mistakes in comments in ena_com.h,
ena_com.c and ena_netdev.c

Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
---
 drivers/net/ethernet/amazon/ena/ena_com.c    |  2 +-
 drivers/net/ethernet/amazon/ena/ena_com.h    | 30 ++++++++++----------
 drivers/net/ethernet/amazon/ena/ena_netdev.c |  2 +-
 3 files changed, 17 insertions(+), 17 deletions(-)

diff --git a/drivers/net/ethernet/amazon/ena/ena_com.c b/drivers/net/ethernet/amazon/ena/ena_com.c
index e2025eb86984..d47821655d61 100644
--- a/drivers/net/ethernet/amazon/ena/ena_com.c
+++ b/drivers/net/ethernet/amazon/ena/ena_com.c
@@ -772,7 +772,7 @@ static int ena_com_wait_and_process_admin_cq_interrupts(struct ena_comp_ctx *com
 			if (admin_queue->auto_polling)
 				admin_queue->polling = true;
 		} else {
-			pr_err("The ena device doesn't send a completion for the admin cmd %d status %d\n",
+			pr_err("The ena device didn't send a completion for the admin cmd %d status %d\n",
 			       comp_ctx->cmd_opcode, comp_ctx->status);
 		}
 		/* Check if shifted to polling mode.
diff --git a/drivers/net/ethernet/amazon/ena/ena_com.h b/drivers/net/ethernet/amazon/ena/ena_com.h
index 13a1b7812c46..bd65ae205f8d 100644
--- a/drivers/net/ethernet/amazon/ena/ena_com.h
+++ b/drivers/net/ethernet/amazon/ena/ena_com.h
@@ -393,7 +393,7 @@ struct ena_aenq_handlers {
  */
 int ena_com_mmio_reg_read_request_init(struct ena_com_dev *ena_dev);
 
-/* ena_com_set_mmio_read_mode - Enable/disable the mmio reg read mechanism
+/* ena_com_set_mmio_read_mode - Enable/disable the indirect mmio reg read mechanism
  * @ena_dev: ENA communication layer struct
  * @readless_supported: readless mode (enable/disable)
  */
@@ -515,7 +515,7 @@ void ena_com_set_admin_auto_polling_mode(struct ena_com_dev *ena_dev,
 /* ena_com_admin_q_comp_intr_handler - admin queue interrupt handler
  * @ena_dev: ENA communication layer struct
  *
- * This method go over the admin completion queue and wake up all the pending
+ * This method goes over the admin completion queue and wakes up all the pending
  * threads that wait on the commands wait event.
  *
  * @note: Should be called after MSI-X interrupt.
@@ -525,7 +525,7 @@ void ena_com_admin_q_comp_intr_handler(struct ena_com_dev *ena_dev);
 /* ena_com_aenq_intr_handler - AENQ interrupt handler
  * @ena_dev: ENA communication layer struct
  *
- * This method go over the async event notification queue and call the proper
+ * This method goes over the async event notification queue and calls the proper
  * aenq handler.
  */
 void ena_com_aenq_intr_handler(struct ena_com_dev *dev, void *data);
@@ -542,14 +542,14 @@ void ena_com_abort_admin_commands(struct ena_com_dev *ena_dev);
 /* ena_com_wait_for_abort_completion - Wait for admin commands abort.
  * @ena_dev: ENA communication layer struct
  *
- * This method wait until all the outstanding admin commands will be completed.
+ * This method waits until all the outstanding admin commands are completed.
  */
 void ena_com_wait_for_abort_completion(struct ena_com_dev *ena_dev);
 
 /* ena_com_validate_version - Validate the device parameters
  * @ena_dev: ENA communication layer struct
  *
- * This method validate the device parameters are the same as the saved
+ * This method verifies the device parameters are the same as the saved
  * parameters in ena_dev.
  * This method is useful after device reset, to validate the device mac address
  * and the device offloads are the same as before the reset.
@@ -689,7 +689,7 @@ int ena_com_set_hash_function(struct ena_com_dev *ena_dev);
  *
  * Retrieve the hash function from the device.
  *
- * @note: If the caller called ena_com_fill_hash_function but didn't flash
+ * @note: If the caller called ena_com_fill_hash_function but didn't flush
  * it to the device, the new configuration will be lost.
  *
  * @return: 0 on Success and negative value otherwise.
@@ -703,7 +703,7 @@ int ena_com_get_hash_function(struct ena_com_dev *ena_dev,
  *
  * Retrieve the hash key.
  *
- * @note: If the caller called ena_com_fill_hash_key but didn't flash
+ * @note: If the caller called ena_com_fill_hash_key but didn't flush
  * it to the device, the new configuration will be lost.
  *
  * @return: 0 on Success and negative value otherwise.
@@ -743,7 +743,7 @@ int ena_com_set_hash_ctrl(struct ena_com_dev *ena_dev);
  *
  * Retrieve the hash control from the device.
  *
- * @note, If the caller called ena_com_fill_hash_ctrl but didn't flash
+ * @note: If the caller called ena_com_fill_hash_ctrl but didn't flush
  * it to the device, the new configuration will be lost.
  *
  * @return: 0 on Success and negative value otherwise.
@@ -795,7 +795,7 @@ int ena_com_indirect_table_set(struct ena_com_dev *ena_dev);
  *
  * Retrieve the RSS indirection table from the device.
  *
- * @note: If the caller called ena_com_indirect_table_fill_entry but didn't flash
+ * @note: If the caller called ena_com_indirect_table_fill_entry but didn't flush
  * it to the device, the new configuration will be lost.
  *
  * @return: 0 on Success and negative value otherwise.
@@ -821,14 +821,14 @@ int ena_com_allocate_debug_area(struct ena_com_dev *ena_dev,
 /* ena_com_delete_debug_area - Free the debug area resources.
  * @ena_dev: ENA communication layer struct
  *
- * Free the allocate debug area.
+ * Free the allocated debug area.
  */
 void ena_com_delete_debug_area(struct ena_com_dev *ena_dev);
 
 /* ena_com_delete_host_info - Free the host info resources.
  * @ena_dev: ENA communication layer struct
  *
- * Free the allocate host info.
+ * Free the allocated host info.
  */
 void ena_com_delete_host_info(struct ena_com_dev *ena_dev);
 
@@ -869,9 +869,9 @@ int ena_com_destroy_io_cq(struct ena_com_dev *ena_dev,
  * @cmd_completion: command completion return value.
  * @cmd_comp_size: command completion size.
 
- * Submit an admin command and then wait until the device will return a
+ * Submit an admin command and then wait until the device returns a
  * completion.
- * The completion will be copyed into cmd_comp.
+ * The completion will be copied into cmd_comp.
  *
  * @return - 0 on success, negative value on failure.
  */
@@ -934,7 +934,7 @@ unsigned int ena_com_get_nonadaptive_moderation_interval_rx(struct ena_com_dev *
 /* ena_com_config_dev_mode - Configure the placement policy of the device.
  * @ena_dev: ENA communication layer struct
  * @llq_features: LLQ feature descriptor, retrieve via
- *                ena_com_get_dev_attr_feat.
+ *		   ena_com_get_dev_attr_feat.
  * @ena_llq_config: The default driver LLQ parameters configurations
  */
 int ena_com_config_dev_mode(struct ena_com_dev *ena_dev,
@@ -960,7 +960,7 @@ static inline void ena_com_disable_adaptive_moderation(struct ena_com_dev *ena_d
  * @intr_reg: interrupt register to update.
  * @rx_delay_interval: Rx interval in usecs
  * @tx_delay_interval: Tx interval in usecs
- * @unmask: unask enable/disable
+ * @unmask: unmask enable/disable
  *
  * Prepare interrupt update register with the supplied parameters.
  */
diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.c b/drivers/net/ethernet/amazon/ena/ena_netdev.c
index 0999fe3310fb..0349e0305608 100644
--- a/drivers/net/ethernet/amazon/ena/ena_netdev.c
+++ b/drivers/net/ethernet/amazon/ena/ena_netdev.c
@@ -4190,7 +4190,7 @@ static int ena_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	calc_queue_ctx.get_feat_ctx = &get_feat_ctx;
 	calc_queue_ctx.pdev = pdev;
 
-	/* Initial Tx and RX interrupt delay. Assumes 1 usec granularity.
+	/* Initial TX and RX interrupt delay. Assumes 1 usec granularity.
 	 * Updated during device initialization with the real granularity
 	 */
 	ena_dev->intr_moder_tx_interval = ENA_INTR_INITIAL_TX_INTERVAL_USECS;
-- 
2.23.1

[PATCH V1 net-next 10/15] net: ena: cosmetic: fix line break issues

[akiyano]

From: Arthur Kiyanovski <akiyano@amazon.com>

1. Join unnecessarily broken short lines in ena_com.c ena_netdev.c
2. Fix Indentations of broken lines

Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
---
 drivers/net/ethernet/amazon/ena/ena_com.c    |  8 +++-----
 drivers/net/ethernet/amazon/ena/ena_netdev.c | 13 ++++++-------
 2 files changed, 9 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/amazon/ena/ena_com.c b/drivers/net/ethernet/amazon/ena/ena_com.c
index d47821655d61..a513d71576bd 100644
--- a/drivers/net/ethernet/amazon/ena/ena_com.c
+++ b/drivers/net/ethernet/amazon/ena/ena_com.c
@@ -375,7 +375,7 @@ static int ena_com_init_io_sq(struct ena_com_dev *ena_dev,
 		io_sq->bounce_buf_ctrl.next_to_use = 0;
 
 		size = io_sq->bounce_buf_ctrl.buffer_size *
-			 io_sq->bounce_buf_ctrl.buffers_num;
+			io_sq->bounce_buf_ctrl.buffers_num;
 
 		dev_node = dev_to_node(ena_dev->dmadev);
 		set_dev_node(ena_dev->dmadev, ctx->numa_node);
@@ -699,8 +699,7 @@ static int ena_com_config_llq_info(struct ena_com_dev *ena_dev,
 		/* The desc list entry size should be whole multiply of 8
 		 * This requirement comes from __iowrite64_copy()
 		 */
-		pr_err("illegal entry size %d\n",
-		       llq_info->desc_list_entry_size);
+		pr_err("illegal entry size %d\n", llq_info->desc_list_entry_size);
 		return -EINVAL;
 	}
 
@@ -2045,8 +2044,7 @@ void ena_com_aenq_intr_handler(struct ena_com_dev *dev, void *data)
 
 	/* write the aenq doorbell after all AENQ descriptors were read */
 	mb();
-	writel_relaxed((u32)aenq->head,
-		       dev->reg_bar + ENA_REGS_AENQ_HEAD_DB_OFF);
+	writel_relaxed((u32)aenq->head, dev->reg_bar + ENA_REGS_AENQ_HEAD_DB_OFF);
 }
 
 int ena_com_dev_reset(struct ena_com_dev *ena_dev,
diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.c b/drivers/net/ethernet/amazon/ena/ena_netdev.c
index 0349e0305608..148d13cdd1bf 100644
--- a/drivers/net/ethernet/amazon/ena/ena_netdev.c
+++ b/drivers/net/ethernet/amazon/ena/ena_netdev.c
@@ -2242,7 +2242,7 @@ static int ena_rss_configure(struct ena_adapter *adapter)
 		rc = ena_rss_init_default(adapter);
 		if (rc && (rc != -EOPNOTSUPP)) {
 			netif_err(adapter, ifup, adapter->netdev,
-					"Failed to init RSS rc: %d\n", rc);
+				  "Failed to init RSS rc: %d\n", rc);
 			return rc;
 		}
 	}
@@ -2315,7 +2315,7 @@ static int ena_create_io_tx_queue(struct ena_adapter *adapter, int qid)
 	if (rc) {
 		netif_err(adapter, ifup, adapter->netdev,
 			  "Failed to create I/O TX queue num %d rc: %d\n",
-			   qid, rc);
+			  qid, rc);
 		return rc;
 	}
 
@@ -2464,7 +2464,7 @@ static int create_queues_with_size_backoff(struct ena_adapter *adapter)
 	 * ones due to past queue allocation failures.
 	 */
 	set_io_rings_size(adapter, adapter->requested_tx_ring_size,
-			adapter->requested_rx_ring_size);
+			  adapter->requested_rx_ring_size);
 
 	while (1) {
 		if (ena_xdp_present(adapter)) {
@@ -2505,7 +2505,7 @@ static int create_queues_with_size_backoff(struct ena_adapter *adapter)
 		if (rc != -ENOMEM) {
 			netif_err(adapter, ifup, adapter->netdev,
 				  "Queue creation failed with error code %d\n",
-				   rc);
+				  rc);
 			return rc;
 		}
 
@@ -2528,7 +2528,7 @@ static int create_queues_with_size_backoff(struct ena_adapter *adapter)
 			new_rx_ring_size = cur_rx_ring_size / 2;
 
 		if (new_tx_ring_size < ENA_MIN_RING_SIZE ||
-				new_rx_ring_size < ENA_MIN_RING_SIZE) {
+		    new_rx_ring_size < ENA_MIN_RING_SIZE) {
 			netif_err(adapter, ifup, adapter->netdev,
 				  "Queue creation failed with the smallest possible queue size of %d for both queues. Not retrying with smaller queues\n",
 				  ENA_MIN_RING_SIZE);
@@ -3087,8 +3087,7 @@ static u16 ena_select_queue(struct net_device *dev, struct sk_buff *skb,
 	return qid;
 }
 
-static void ena_config_host_info(struct ena_com_dev *ena_dev,
-				 struct pci_dev *pdev)
+static void ena_config_host_info(struct ena_com_dev *ena_dev, struct pci_dev *pdev)
 {
 	struct ena_admin_host_info *host_info;
 	int rc;
-- 
2.23.1

[PATCH V1 net-next 11/15] net: ena: cosmetic: remove unnecessary code

[akiyano]

From: Arthur Kiyanovski <akiyano@amazon.com>

1. Remove unused definition of DRV_MODULE_VERSION
2. Remove {} from single line-of-code ifs
3. Remove unnecessary comments from ena_get/set_coalesce()
4. Remove unnecessary extra spaces and newlines

Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
---
 drivers/net/ethernet/amazon/ena/ena_ethtool.c | 11 +++--------
 drivers/net/ethernet/amazon/ena/ena_netdev.h  |  6 ------
 2 files changed, 3 insertions(+), 14 deletions(-)

diff --git a/drivers/net/ethernet/amazon/ena/ena_ethtool.c b/drivers/net/ethernet/amazon/ena/ena_ethtool.c
index ca13efa13b63..e340b65af08c 100644
--- a/drivers/net/ethernet/amazon/ena/ena_ethtool.c
+++ b/drivers/net/ethernet/amazon/ena/ena_ethtool.c
@@ -206,7 +206,7 @@ int ena_get_sset_count(struct net_device *netdev, int sset)
 	if (sset != ETH_SS_STATS)
 		return -EOPNOTSUPP;
 
-	return  adapter->num_io_queues * (ENA_STATS_ARRAY_TX + ENA_STATS_ARRAY_RX)
+	return adapter->num_io_queues * (ENA_STATS_ARRAY_TX + ENA_STATS_ARRAY_RX)
 		+ ENA_STATS_ARRAY_GLOBAL + ENA_STATS_ARRAY_ENA_COM;
 }
 
@@ -260,7 +260,6 @@ static void ena_get_strings(struct net_device *netdev, u32 sset, u8 *data)
 
 	for (i = 0; i < ENA_STATS_ARRAY_GLOBAL; i++) {
 		ena_stats = &ena_stats_global_strings[i];
-
 		memcpy(data, ena_stats->name, ETH_GSTRING_LEN);
 		data += ETH_GSTRING_LEN;
 	}
@@ -307,10 +306,8 @@ static int ena_get_coalesce(struct net_device *net_dev,
 	struct ena_adapter *adapter = netdev_priv(net_dev);
 	struct ena_com_dev *ena_dev = adapter->ena_dev;
 
-	if (!ena_com_interrupt_moderation_supported(ena_dev)) {
-		/* the devie doesn't support interrupt moderation */
+	if (!ena_com_interrupt_moderation_supported(ena_dev))
 		return -EOPNOTSUPP;
-	}
 
 	coalesce->tx_coalesce_usecs =
 		ena_com_get_nonadaptive_moderation_interval_tx(ena_dev) *
@@ -355,10 +352,8 @@ static int ena_set_coalesce(struct net_device *net_dev,
 	struct ena_com_dev *ena_dev = adapter->ena_dev;
 	int rc;
 
-	if (!ena_com_interrupt_moderation_supported(ena_dev)) {
-		/* the devie doesn't support interrupt moderation */
+	if (!ena_com_interrupt_moderation_supported(ena_dev))
 		return -EOPNOTSUPP;
-	}
 
 	rc = ena_com_update_nonadaptive_moderation_interval_tx(ena_dev,
 							       coalesce->tx_coalesce_usecs);
diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.h b/drivers/net/ethernet/amazon/ena/ena_netdev.h
index 680099afcccf..5320b916a36b 100644
--- a/drivers/net/ethernet/amazon/ena/ena_netdev.h
+++ b/drivers/net/ethernet/amazon/ena/ena_netdev.h
@@ -50,12 +50,6 @@
 #define DRV_MODULE_GEN_SUBMINOR 0
 
 #define DRV_MODULE_NAME		"ena"
-#ifndef DRV_MODULE_GENERATION
-#define DRV_MODULE_GENERATION \
-	__stringify(DRV_MODULE_GEN_MAJOR) "."	\
-	__stringify(DRV_MODULE_GEN_MINOR) "."	\
-	__stringify(DRV_MODULE_GEN_SUBMINOR) "K"
-#endif
 
 #define DEVICE_NAME	"Elastic Network Adapter (ENA)"
 
-- 
2.23.1

[PATCH V1 net-next 12/15] net: ena: cosmetic: code reorderings

[akiyano]

From: Arthur Kiyanovski <akiyano@amazon.com>

1. Reorder sanity checks in get_comp_ctxt() to make more sense
2. Reorder variables in ena_com_fill_hash_function() and
   ena_calc_io_queue_size() in reverse christmas tree.
3. Move around member initializations.

Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
---
 drivers/net/ethernet/amazon/ena/ena_com.c    | 17 +++++++++--------
 drivers/net/ethernet/amazon/ena/ena_netdev.c |  5 ++---
 2 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/amazon/ena/ena_com.c b/drivers/net/ethernet/amazon/ena/ena_com.c
index a513d71576bd..bf3465e5a2e7 100644
--- a/drivers/net/ethernet/amazon/ena/ena_com.c
+++ b/drivers/net/ethernet/amazon/ena/ena_com.c
@@ -200,17 +200,17 @@ static void comp_ctxt_release(struct ena_com_admin_queue *queue,
 static struct ena_comp_ctx *get_comp_ctxt(struct ena_com_admin_queue *queue,
 					  u16 command_id, bool capture)
 {
-	if (unlikely(!queue->comp_ctx)) {
-		pr_err("Completion context is NULL\n");
-		return NULL;
-	}
-
 	if (unlikely(command_id >= queue->q_depth)) {
 		pr_err("command id is larger than the queue size. cmd_id: %u queue size %d\n",
 		       command_id, queue->q_depth);
 		return NULL;
 	}
 
+	if (unlikely(!queue->comp_ctx)) {
+		pr_err("Completion context is NULL\n");
+		return NULL;
+	}
+
 	if (unlikely(queue->comp_ctx[command_id].occupied && capture)) {
 		pr_err("Completion context is occupied\n");
 		return NULL;
@@ -2266,13 +2266,14 @@ int ena_com_fill_hash_function(struct ena_com_dev *ena_dev,
 			       enum ena_admin_hash_functions func,
 			       const u8 *key, u16 key_len, u32 init_val)
 {
-	struct ena_rss *rss = &ena_dev->rss;
+	struct ena_admin_feature_rss_flow_hash_control *hash_key;
 	struct ena_admin_get_feat_resp get_resp;
-	struct ena_admin_feature_rss_flow_hash_control *hash_key =
-		rss->hash_key;
 	enum ena_admin_hash_functions old_func;
+	struct ena_rss *rss = &ena_dev->rss;
 	int rc;
 
+	hash_key = rss->hash_key;
+
 	/* Make sure size is a mult of DWs */
 	if (unlikely(key_len & 0x3))
 		return -EINVAL;
diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.c b/drivers/net/ethernet/amazon/ena/ena_netdev.c
index 148d13cdd1bf..313e65b17492 100644
--- a/drivers/net/ethernet/amazon/ena/ena_netdev.c
+++ b/drivers/net/ethernet/amazon/ena/ena_netdev.c
@@ -4121,8 +4121,8 @@ static int ena_calc_io_queue_size(struct ena_calc_queue_size_ctx *ctx)
  */
 static int ena_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
-	struct ena_com_dev_get_features_ctx get_feat_ctx;
 	struct ena_calc_queue_size_ctx calc_queue_ctx = { 0 };
+	struct ena_com_dev_get_features_ctx get_feat_ctx;
 	struct ena_llq_configurations llq_config;
 	struct ena_com_dev *ena_dev = NULL;
 	struct ena_adapter *adapter;
@@ -4233,12 +4233,11 @@ static int ena_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	adapter->num_io_queues = max_num_io_queues;
 	adapter->max_num_io_queues = max_num_io_queues;
+	adapter->last_monitored_tx_qid = 0;
 
 	adapter->xdp_first_ring = 0;
 	adapter->xdp_num_queues = 0;
 
-	adapter->last_monitored_tx_qid = 0;
-
 	adapter->rx_copybreak = ENA_DEFAULT_RX_COPYBREAK;
 	adapter->wd_state = wd_state;
 
-- 
2.23.1

[PATCH V1 net-next 13/15] net: ena: cosmetic: fix spacing issues

[akiyano]

From: Arthur Kiyanovski <akiyano@amazon.com>

1. Add leading and trailing spaces to several comments for better
   readability
2. Make tabs and spaces uniform in enum defines in ena_admin_defs.h

Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
---
 drivers/net/ethernet/amazon/ena/ena_admin_defs.h  | 6 +++---
 drivers/net/ethernet/amazon/ena/ena_common_defs.h | 2 +-
 drivers/net/ethernet/amazon/ena/ena_eth_io_defs.h | 2 +-
 drivers/net/ethernet/amazon/ena/ena_regs_defs.h   | 2 +-
 4 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/amazon/ena/ena_admin_defs.h b/drivers/net/ethernet/amazon/ena/ena_admin_defs.h
index 727836f638ad..336742f6e3c3 100644
--- a/drivers/net/ethernet/amazon/ena/ena_admin_defs.h
+++ b/drivers/net/ethernet/amazon/ena/ena_admin_defs.h
@@ -768,8 +768,8 @@ enum ena_admin_os_type {
 	ENA_ADMIN_OS_DPDK                           = 3,
 	ENA_ADMIN_OS_FREEBSD                        = 4,
 	ENA_ADMIN_OS_IPXE                           = 5,
-	ENA_ADMIN_OS_ESXI			    = 6,
-	ENA_ADMIN_OS_GROUPS_NUM			    = 6,
+	ENA_ADMIN_OS_ESXI                           = 6,
+	ENA_ADMIN_OS_GROUPS_NUM                     = 6,
 };
 
 struct ena_admin_host_info {
@@ -1136,4 +1136,4 @@ struct ena_admin_ena_mmio_req_read_less_resp {
 /* aenq_link_change_desc */
 #define ENA_ADMIN_AENQ_LINK_CHANGE_DESC_LINK_STATUS_MASK    BIT(0)
 
-#endif /*_ENA_ADMIN_H_ */
+#endif /* _ENA_ADMIN_H_ */
diff --git a/drivers/net/ethernet/amazon/ena/ena_common_defs.h b/drivers/net/ethernet/amazon/ena/ena_common_defs.h
index 23beb7e7ed7b..8a8ded0de9ac 100644
--- a/drivers/net/ethernet/amazon/ena/ena_common_defs.h
+++ b/drivers/net/ethernet/amazon/ena/ena_common_defs.h
@@ -45,4 +45,4 @@ struct ena_common_mem_addr {
 	u16 reserved16;
 };
 
-#endif /*_ENA_COMMON_H_ */
+#endif /* _ENA_COMMON_H_ */
diff --git a/drivers/net/ethernet/amazon/ena/ena_eth_io_defs.h b/drivers/net/ethernet/amazon/ena/ena_eth_io_defs.h
index ee28fb067d8c..d105c9c56192 100644
--- a/drivers/net/ethernet/amazon/ena/ena_eth_io_defs.h
+++ b/drivers/net/ethernet/amazon/ena/ena_eth_io_defs.h
@@ -414,4 +414,4 @@ struct ena_eth_io_numa_node_cfg_reg {
 #define ENA_ETH_IO_NUMA_NODE_CFG_REG_ENABLED_SHIFT          31
 #define ENA_ETH_IO_NUMA_NODE_CFG_REG_ENABLED_MASK           BIT(31)
 
-#endif /*_ENA_ETH_IO_H_ */
+#endif /* _ENA_ETH_IO_H_ */
diff --git a/drivers/net/ethernet/amazon/ena/ena_regs_defs.h b/drivers/net/ethernet/amazon/ena/ena_regs_defs.h
index 04fcafcc059c..b514bb1b855d 100644
--- a/drivers/net/ethernet/amazon/ena/ena_regs_defs.h
+++ b/drivers/net/ethernet/amazon/ena/ena_regs_defs.h
@@ -154,4 +154,4 @@ enum ena_regs_reset_reason_types {
 #define ENA_REGS_RSS_IND_ENTRY_UPDATE_CQ_IDX_SHIFT          16
 #define ENA_REGS_RSS_IND_ENTRY_UPDATE_CQ_IDX_MASK           0xffff0000
 
-#endif /*_ENA_REGS_H_ */
+#endif /* _ENA_REGS_H_ */
-- 
2.23.1

[PATCH V1 net-next 14/15] net: ena: cosmetic: minor code changes

[akiyano]

From: Arthur Kiyanovski <akiyano@amazon.com>

1. Use BIT macro instead of shift operator for code clarity
2. Replace multiple flag assignments to a single assignment of multiple
   flags in ena_com_add_single_rx_desc()
3. Move ENA_HASH_KEY_SIZE from ena_netdev.h to ena_com.h

Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
---
 drivers/net/ethernet/amazon/ena/ena_com.c     | 2 +-
 drivers/net/ethernet/amazon/ena/ena_com.h     | 2 ++
 drivers/net/ethernet/amazon/ena/ena_eth_com.c | 8 ++++----
 drivers/net/ethernet/amazon/ena/ena_netdev.h  | 2 --
 4 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/amazon/ena/ena_com.c b/drivers/net/ethernet/amazon/ena/ena_com.c
index bf3465e5a2e7..4b1dbedbe921 100644
--- a/drivers/net/ethernet/amazon/ena/ena_com.c
+++ b/drivers/net/ethernet/amazon/ena/ena_com.c
@@ -2285,7 +2285,7 @@ int ena_com_fill_hash_function(struct ena_com_dev *ena_dev,
 	if (unlikely(rc))
 		return rc;
 
-	if (!((1 << func) & get_resp.u.flow_hash_func.supported_func)) {
+	if (!(BIT(func) & get_resp.u.flow_hash_func.supported_func)) {
 		pr_err("Flow hash function %d isn't supported\n", func);
 		return -EOPNOTSUPP;
 	}
diff --git a/drivers/net/ethernet/amazon/ena/ena_com.h b/drivers/net/ethernet/amazon/ena/ena_com.h
index bd65ae205f8d..325c9a5f677b 100644
--- a/drivers/net/ethernet/amazon/ena/ena_com.h
+++ b/drivers/net/ethernet/amazon/ena/ena_com.h
@@ -77,6 +77,8 @@
 #define ENA_INTR_INITIAL_RX_INTERVAL_USECS 0
 #define ENA_DEFAULT_INTR_DELAY_RESOLUTION 1
 
+#define ENA_HASH_KEY_SIZE 40
+
 #define ENA_HW_HINTS_NO_TIMEOUT	0xFFFF
 
 #define ENA_FEATURE_MAX_QUEUE_EXT_VER 1
diff --git a/drivers/net/ethernet/amazon/ena/ena_eth_com.c b/drivers/net/ethernet/amazon/ena/ena_eth_com.c
index f0b90e1551a3..cb6bce101c3b 100644
--- a/drivers/net/ethernet/amazon/ena/ena_eth_com.c
+++ b/drivers/net/ethernet/amazon/ena/ena_eth_com.c
@@ -598,10 +598,10 @@ int ena_com_add_single_rx_desc(struct ena_com_io_sq *io_sq,
 
 	desc->length = ena_buf->len;
 
-	desc->ctrl = ENA_ETH_IO_RX_DESC_FIRST_MASK;
-	desc->ctrl |= ENA_ETH_IO_RX_DESC_LAST_MASK;
-	desc->ctrl |= io_sq->phase & ENA_ETH_IO_RX_DESC_PHASE_MASK;
-	desc->ctrl |= ENA_ETH_IO_RX_DESC_COMP_REQ_MASK;
+	desc->ctrl = ENA_ETH_IO_RX_DESC_FIRST_MASK |
+		ENA_ETH_IO_RX_DESC_LAST_MASK |
+		(io_sq->phase & ENA_ETH_IO_RX_DESC_PHASE_MASK) |
+		ENA_ETH_IO_RX_DESC_COMP_REQ_MASK;
 
 	desc->req_id = req_id;
 
diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.h b/drivers/net/ethernet/amazon/ena/ena_netdev.h
index 5320b916a36b..9b3948c7e8a0 100644
--- a/drivers/net/ethernet/amazon/ena/ena_netdev.h
+++ b/drivers/net/ethernet/amazon/ena/ena_netdev.h
@@ -98,8 +98,6 @@
 #define ENA_RX_RSS_TABLE_LOG_SIZE  7
 #define ENA_RX_RSS_TABLE_SIZE	(1 << ENA_RX_RSS_TABLE_LOG_SIZE)
 
-#define ENA_HASH_KEY_SIZE	40
-
 /* The number of tx packet completions that will be handled each NAPI poll
  * cycle is ring_size / ENA_TX_POLL_BUDGET_DIVIDER.
  */
-- 
2.23.1

[PATCH V1 net-next 15/15] net: ena: reduce driver load time

[akiyano]

From: Arthur Kiyanovski <akiyano@amazon.com>

This commit reduces the driver load time by using usec resolution
instead of msec when polling for hardware state change.

Also add back-off mechanism to handle cases where minimal sleep
time is not enough.

Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
---
 drivers/net/ethernet/amazon/ena/ena_com.c    | 36 ++++++++++++++------
 drivers/net/ethernet/amazon/ena/ena_com.h    |  3 ++
 drivers/net/ethernet/amazon/ena/ena_netdev.c |  2 ++
 drivers/net/ethernet/amazon/ena/ena_netdev.h |  2 ++
 4 files changed, 33 insertions(+), 10 deletions(-)

diff --git a/drivers/net/ethernet/amazon/ena/ena_com.c b/drivers/net/ethernet/amazon/ena/ena_com.c
index 4b1dbedbe921..432f143559a1 100644
--- a/drivers/net/ethernet/amazon/ena/ena_com.c
+++ b/drivers/net/ethernet/amazon/ena/ena_com.c
@@ -62,7 +62,9 @@
 
 #define ENA_REGS_ADMIN_INTR_MASK 1
 
-#define ENA_POLL_MS	5
+#define ENA_MIN_ADMIN_POLL_US 100
+
+#define ENA_MAX_ADMIN_POLL_US 5000
 
 /*****************************************************************************/
 /*****************************************************************************/
@@ -540,12 +542,20 @@ static int ena_com_comp_status_to_errno(u8 comp_status)
 	return -EINVAL;
 }
 
+static void ena_delay_exponential_backoff_us(u32 exp, u32 delay_us)
+{
+	delay_us = max_t(u32, ENA_MIN_ADMIN_POLL_US, delay_us);
+	delay_us = min_t(u32, delay_us * (1U << exp), ENA_MAX_ADMIN_POLL_US);
+	usleep_range(delay_us, 2 * delay_us);
+}
+
 static int ena_com_wait_and_process_admin_cq_polling(struct ena_comp_ctx *comp_ctx,
 						     struct ena_com_admin_queue *admin_queue)
 {
 	unsigned long flags = 0;
 	unsigned long timeout;
 	int ret;
+	u32 exp = 0;
 
 	timeout = jiffies + usecs_to_jiffies(admin_queue->completion_timeout);
 
@@ -569,7 +579,8 @@ static int ena_com_wait_and_process_admin_cq_polling(struct ena_comp_ctx *comp_c
 			goto err;
 		}
 
-		msleep(ENA_POLL_MS);
+		ena_delay_exponential_backoff_us(exp++,
+						 admin_queue->ena_dev->ena_min_poll_delay_us);
 	}
 
 	if (unlikely(comp_ctx->status == ENA_CMD_ABORTED)) {
@@ -939,12 +950,13 @@ static void ena_com_io_queue_free(struct ena_com_dev *ena_dev,
 static int wait_for_reset_state(struct ena_com_dev *ena_dev, u32 timeout,
 				u16 exp_state)
 {
-	u32 val, i;
+	u32 val, exp = 0;
+	unsigned long timeout_stamp;
 
-	/* Convert timeout from resolution of 100ms to ENA_POLL_MS */
-	timeout = (timeout * 100) / ENA_POLL_MS;
+	/* Convert timeout from resolution of 100ms to us resolution. */
+	timeout_stamp = jiffies + usecs_to_jiffies(100 * 1000 * timeout);
 
-	for (i = 0; i < timeout; i++) {
+	while (1) {
 		val = ena_com_reg_bar_read32(ena_dev, ENA_REGS_DEV_STS_OFF);
 
 		if (unlikely(val == ENA_MMIO_READ_TIMEOUT)) {
@@ -956,10 +968,11 @@ static int wait_for_reset_state(struct ena_com_dev *ena_dev, u32 timeout,
 			exp_state)
 			return 0;
 
-		msleep(ENA_POLL_MS);
-	}
+		if (time_is_before_jiffies(timeout_stamp))
+			return -ETIME;
 
-	return -ETIME;
+		ena_delay_exponential_backoff_us(exp++, ena_dev->ena_min_poll_delay_us);
+	}
 }
 
 static bool ena_com_check_supported_feature_id(struct ena_com_dev *ena_dev,
@@ -1436,11 +1449,13 @@ void ena_com_wait_for_abort_completion(struct ena_com_dev *ena_dev)
 {
 	struct ena_com_admin_queue *admin_queue = &ena_dev->admin_queue;
 	unsigned long flags = 0;
+	u32 exp = 0;
 
 	spin_lock_irqsave(&admin_queue->q_lock, flags);
 	while (atomic_read(&admin_queue->outstanding_cmds) != 0) {
 		spin_unlock_irqrestore(&admin_queue->q_lock, flags);
-		msleep(ENA_POLL_MS);
+		ena_delay_exponential_backoff_us(exp++,
+						 ena_dev->ena_min_poll_delay_us);
 		spin_lock_irqsave(&admin_queue->q_lock, flags);
 	}
 	spin_unlock_irqrestore(&admin_queue->q_lock, flags);
@@ -1788,6 +1803,7 @@ int ena_com_admin_init(struct ena_com_dev *ena_dev,
 	if (ret)
 		goto error;
 
+	admin_queue->ena_dev = ena_dev;
 	admin_queue->running_state = true;
 
 	return 0;
diff --git a/drivers/net/ethernet/amazon/ena/ena_com.h b/drivers/net/ethernet/amazon/ena/ena_com.h
index 325c9a5f677b..bc187adf54e4 100644
--- a/drivers/net/ethernet/amazon/ena/ena_com.h
+++ b/drivers/net/ethernet/amazon/ena/ena_com.h
@@ -239,6 +239,7 @@ struct ena_com_stats_admin {
 
 struct ena_com_admin_queue {
 	void *q_dmadev;
+	struct ena_com_dev *ena_dev;
 	spinlock_t q_lock; /* spinlock for the admin queue */
 
 	struct ena_comp_ctx *comp_ctx;
@@ -351,6 +352,8 @@ struct ena_com_dev {
 	struct ena_intr_moder_entry *intr_moder_tbl;
 
 	struct ena_com_llq_info llq_info;
+
+	u32 ena_min_poll_delay_us;
 };
 
 struct ena_com_dev_get_features_ctx {
diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.c b/drivers/net/ethernet/amazon/ena/ena_netdev.c
index 313e65b17492..46865d5bd7e7 100644
--- a/drivers/net/ethernet/amazon/ena/ena_netdev.c
+++ b/drivers/net/ethernet/amazon/ena/ena_netdev.c
@@ -4166,6 +4166,8 @@ static int ena_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto err_free_region;
 	}
 
+	ena_dev->ena_min_poll_delay_us = ENA_ADMIN_POLL_DELAY_US;
+
 	ena_dev->dmadev = &pdev->dev;
 
 	rc = ena_device_init(ena_dev, pdev, &get_feat_ctx, &wd_state);
diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.h b/drivers/net/ethernet/amazon/ena/ena_netdev.h
index 9b3948c7e8a0..ba030d260940 100644
--- a/drivers/net/ethernet/amazon/ena/ena_netdev.h
+++ b/drivers/net/ethernet/amazon/ena/ena_netdev.h
@@ -129,6 +129,8 @@
 #define ENA_IO_IRQ_FIRST_IDX		1
 #define ENA_IO_IRQ_IDX(q)		(ENA_IO_IRQ_FIRST_IDX + (q))
 
+#define ENA_ADMIN_POLL_DELAY_US 100
+
 /* ENA device should send keep alive msg every 1 sec.
  * We wait for 6 sec just to be on the safe side.
  */
-- 
2.23.1

Re: [PATCH V1 net-next 05/15] net: ena: add prints to failed commands

[Jakub Kicinski]

On Thu, 21 May 2020 22:08:24 +0300 akiyano@amazon.com wrote:
> diff --git a/drivers/net/ethernet/amazon/ena/ena_eth_com.c b/drivers/net/ethernet/amazon/ena/ena_eth_com.c
> index a014f514c069..f0b90e1551a3 100644
> --- a/drivers/net/ethernet/amazon/ena/ena_eth_com.c
> +++ b/drivers/net/ethernet/amazon/ena/ena_eth_com.c
> @@ -175,8 +175,10 @@ static int ena_com_close_bounce_buffer(struct ena_com_io_sq *io_sq)
>  	if (pkt_ctrl->idx) {
>  		rc = ena_com_write_bounce_buffer_to_dev(io_sq,
>  							pkt_ctrl->curr_bounce_buf);
> -		if (unlikely(rc))
> +		if (unlikely(rc)) {
> +			pr_err("failed to write bounce buffer to device\n");

Could you use dev_err() or even better netdev_err() to give users an
idea which device is misbehaving?

>  			return rc;
> +		}
>  
>  		pkt_ctrl->curr_bounce_buf =
>  			ena_com_get_next_bounce_buffer(&io_sq->bounce_buf_ctrl);

Re: [PATCH V1 net-next 00/15] ENA features and cosmetic changes

[Jakub Kicinski]

On Thu, 21 May 2020 22:08:19 +0300 akiyano@amazon.com wrote:
> From: Arthur Kiyanovski <akiyano@amazon.com>
> 
> This patchset includes:
> 1. new rx offset feature
> 2. reduction of the driver load time
> 3. error prints
> 4. multiple cosmetic changes to the code 

Other than the nit on using better print functions looks good!