All of lore.kernel.org
 help / color / mirror / Atom feed
From: dillon.minfei@gmail.com
To: robh+dt@kernel.org, p.zabel@pengutronix.de,
	mcoquelin.stm32@gmail.com, alexandre.torgue@st.com,
	thierry.reding@gmail.com, sam@ravnborg.org, airlied@linux.ie,
	daniel@ffwll.ch, mturquette@baylibre.com, sboyd@kernel.org
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-spi@vger.kernel.org,
	linux-stm32@st-md-mailman.stormreply.com,
	dri-devel@lists.freedesktop.org, linux-clk@vger.kernel.org,
	dillon min <dillon.minfei@gmail.com>
Subject: [PATCH v5 1/8] ARM: dts: stm32: Add dma config for spi5
Date: Mon, 25 May 2020 11:40:55 +0800	[thread overview]
Message-ID: <1590378062-7965-2-git-send-email-dillon.minfei@gmail.com> (raw)
In-Reply-To: <1590378062-7965-1-git-send-email-dillon.minfei@gmail.com>

From: dillon min <dillon.minfei@gmail.com>

Enable spi5's dma configuration. for graphics data output to
ilitek ili9341 panel via mipi dbi interface

Signed-off-by: dillon min <dillon.minfei@gmail.com>
---
 arch/arm/boot/dts/stm32f429.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index d777069..5820b11 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -660,6 +660,9 @@
 			reg = <0x40015000 0x400>;
 			interrupts = <85>;
 			clocks = <&rcc 0 STM32F4_APB2_CLOCK(SPI5)>;
+			dmas = <&dma2 3 2 0x400 0x0>,
+				<&dma2 4 2 0x400 0x0>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
-- 
2.7.4


WARNING: multiple messages have this Message-ID (diff)
From: dillon.minfei@gmail.com
To: robh+dt@kernel.org, p.zabel@pengutronix.de,
	mcoquelin.stm32@gmail.com, alexandre.torgue@st.com,
	thierry.reding@gmail.com, sam@ravnborg.org, airlied@linux.ie,
	daniel@ffwll.ch, mturquette@baylibre.com, sboyd@kernel.org
Cc: devicetree@vger.kernel.org, linux-clk@vger.kernel.org,
	linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
	linux-spi@vger.kernel.org, dillon min <dillon.minfei@gmail.com>,
	linux-stm32@st-md-mailman.stormreply.com,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 1/8] ARM: dts: stm32: Add dma config for spi5
Date: Mon, 25 May 2020 11:40:55 +0800	[thread overview]
Message-ID: <1590378062-7965-2-git-send-email-dillon.minfei@gmail.com> (raw)
In-Reply-To: <1590378062-7965-1-git-send-email-dillon.minfei@gmail.com>

From: dillon min <dillon.minfei@gmail.com>

Enable spi5's dma configuration. for graphics data output to
ilitek ili9341 panel via mipi dbi interface

Signed-off-by: dillon min <dillon.minfei@gmail.com>
---
 arch/arm/boot/dts/stm32f429.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index d777069..5820b11 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -660,6 +660,9 @@
 			reg = <0x40015000 0x400>;
 			interrupts = <85>;
 			clocks = <&rcc 0 STM32F4_APB2_CLOCK(SPI5)>;
+			dmas = <&dma2 3 2 0x400 0x0>,
+				<&dma2 4 2 0x400 0x0>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: dillon.minfei@gmail.com
To: robh+dt@kernel.org, p.zabel@pengutronix.de,
	mcoquelin.stm32@gmail.com, alexandre.torgue@st.com,
	thierry.reding@gmail.com, sam@ravnborg.org, airlied@linux.ie,
	daniel@ffwll.ch, mturquette@baylibre.com, sboyd@kernel.org
Cc: devicetree@vger.kernel.org, linux-clk@vger.kernel.org,
	linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
	linux-spi@vger.kernel.org, dillon min <dillon.minfei@gmail.com>,
	linux-stm32@st-md-mailman.stormreply.com,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 1/8] ARM: dts: stm32: Add dma config for spi5
Date: Mon, 25 May 2020 11:40:55 +0800	[thread overview]
Message-ID: <1590378062-7965-2-git-send-email-dillon.minfei@gmail.com> (raw)
In-Reply-To: <1590378062-7965-1-git-send-email-dillon.minfei@gmail.com>

From: dillon min <dillon.minfei@gmail.com>

Enable spi5's dma configuration. for graphics data output to
ilitek ili9341 panel via mipi dbi interface

Signed-off-by: dillon min <dillon.minfei@gmail.com>
---
 arch/arm/boot/dts/stm32f429.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index d777069..5820b11 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -660,6 +660,9 @@
 			reg = <0x40015000 0x400>;
 			interrupts = <85>;
 			clocks = <&rcc 0 STM32F4_APB2_CLOCK(SPI5)>;
+			dmas = <&dma2 3 2 0x400 0x0>,
+				<&dma2 4 2 0x400 0x0>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
-- 
2.7.4

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  reply	other threads:[~2020-05-25  3:41 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <broonie@kernel.org>
2020-05-25  3:40 ` [PATCH v5 0/8] Enable ili9341 and l3gd20 on stm32f429-disco dillon.minfei
2020-05-25  3:40   ` dillon.minfei
2020-05-25  3:40   ` dillon.minfei
2020-05-25  3:40   ` dillon.minfei [this message]
2020-05-25  3:40     ` [PATCH v5 1/8] ARM: dts: stm32: Add dma config for spi5 dillon.minfei
2020-05-25  3:40     ` dillon.minfei
2020-05-25  3:40   ` [PATCH v5 2/8] ARM: dts: stm32: Add pin map for ltdc & spi5 on stm32f429-disco board dillon.minfei
2020-05-25  3:40     ` dillon.minfei
2020-05-25  3:40     ` dillon.minfei
2020-05-25  3:40   ` [PATCH v5 3/8] ARM: dts: stm32: enable ltdc binding with ili9341, gyro l3gd20 on stm32429-disco board dillon.minfei
2020-05-25  3:40     ` dillon.minfei
2020-05-25  3:40     ` dillon.minfei
2020-05-25  3:40   ` [PATCH v5 4/8] dt-bindings: display: panel: Add ilitek ili9341 panel bindings dillon.minfei
2020-05-25  3:40     ` dillon.minfei
2020-05-25  3:40     ` dillon.minfei
2020-05-25  3:40   ` [PATCH v5 5/8] clk: stm32: Fix stm32f429's ltdc driver hang in set clock rate, fix duplicated ltdc clock register to 'clk_core' case ltdc's clock turn off by clk_disable_unused() dillon.minfei
2020-05-25  3:40     ` dillon.minfei
2020-05-25  3:40     ` dillon.minfei
2020-05-25  3:41   ` [PATCH v5 6/8] drm/panel: Add ilitek ili9341 panel driver dillon.minfei
2020-05-25  3:41     ` dillon.minfei
2020-05-25  3:41     ` dillon.minfei
2020-05-25  3:41   ` [PATCH v5 7/8] spi: stm32: Add 'SPI_SIMPLEX_RX', 'SPI_3WIRE_RX' support for stm32f4 dillon.minfei
2020-05-25  3:41     ` dillon.minfei
2020-05-25  3:41     ` dillon.minfei
2020-05-25  3:41   ` [PATCH v5 8/8] spi: flags 'SPI_CONTROLLER_MUST_RX' and 'SPI_CONTROLLER_MUST_TX' can't be coexit with 'SPI_3WIRE' mode dillon.minfei
2020-05-25  3:41     ` dillon.minfei
2020-05-25  3:41     ` dillon.minfei
2020-07-21  9:19   ` [PATCH v5 0/8] Enable ili9341 and l3gd20 on stm32f429-disco Alexandre Torgue
2020-07-21  9:19     ` Alexandre Torgue
2020-07-21  9:19     ` Alexandre Torgue
2020-07-21 10:39     ` dillon min
2020-07-21 10:39       ` dillon min
2020-07-21 10:39       ` dillon min
2020-07-21 11:54       ` Alexandre Torgue
2020-07-21 11:54         ` Alexandre Torgue
2020-07-21 11:54         ` Alexandre Torgue
2020-07-21 12:55         ` dillon min
2020-07-21 12:55           ` dillon min
2020-07-21 12:55           ` dillon min
2020-07-21 12:58           ` Alexandre Torgue
2020-07-21 12:58             ` Alexandre Torgue
2020-07-21 12:58             ` Alexandre Torgue
2020-10-21  7:03 ` [PATCH v2] ASoC: amd: move the call to devm_kzalloc below platform_get_resource() Defang Bo
2020-05-25  3:45 [PATCH v5 0/8] Enable ili9341 and l3gd20 on stm32f429-disco dillon.minfei
2020-05-25  3:45 ` [PATCH v5 1/8] ARM: dts: stm32: Add dma config for spi5 dillon.minfei
2020-05-25  3:45   ` dillon.minfei
2020-05-25  3:45   ` dillon.minfei

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1590378062-7965-2-git-send-email-dillon.minfei@gmail.com \
    --to=dillon.minfei@gmail.com \
    --cc=airlied@linux.ie \
    --cc=alexandre.torgue@st.com \
    --cc=daniel@ffwll.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=mturquette@baylibre.com \
    --cc=p.zabel@pengutronix.de \
    --cc=robh+dt@kernel.org \
    --cc=sam@ravnborg.org \
    --cc=sboyd@kernel.org \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.