[tip: timers/core] clocksource/drivers/davinci: Avoid trailing '\n' hidden in pr_fmt()

["tip-bot2 for Christophe JAILLET" <tip-bot2@linutronix.de>]

The following commit has been merged into the timers/core branch of tip:

Commit-ID:     bdf8783c0dae9d3d8fc1c4078fe849ab8aa8b583
Gitweb:        https://git.kernel.org/tip/bdf8783c0dae9d3d8fc1c4078fe849ab8aa8b583
Author:        Christophe JAILLET <christophe.jaillet@wanadoo.fr>
AuthorDate:    Thu, 09 Apr 2020 11:25:43 +02:00
Committer:     Daniel Lezcano <daniel.lezcano@linaro.org>
CommitterDate: Thu, 09 Apr 2020 11:41:20 +02:00

clocksource/drivers/davinci: Avoid trailing '\n' hidden in pr_fmt()

pr_xxx() functions usually have '\n' at the end of the logging message.
Here, this '\n' is added via the 'pr_fmt' macro.

In order to be more consistent with other files, use a more standard
convention and put these '\n' back in the messages themselves and remove it
from the pr_fmt macro.

While at it, remove a useless message in case of 'kzalloc' failure,
especially with a __GFP_NOFAIL flag.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200409092543.14727-1-christophe.jaillet@wanadoo.fr
---
 drivers/clocksource/timer-davinci.c | 22 ++++++++++------------
 1 file changed, 10 insertions(+), 12 deletions(-)

diff --git a/drivers/clocksource/timer-davinci.c b/drivers/clocksource/timer-davinci.c
index e421946..aae9383 100644
--- a/drivers/clocksource/timer-davinci.c
+++ b/drivers/clocksource/timer-davinci.c
@@ -18,7 +18,7 @@
 #include <clocksource/timer-davinci.h>
 
 #undef pr_fmt
-#define pr_fmt(fmt) "%s: " fmt "\n", __func__
+#define pr_fmt(fmt) "%s: " fmt, __func__
 
 #define DAVINCI_TIMER_REG_TIM12			0x10
 #define DAVINCI_TIMER_REG_TIM34			0x14
@@ -250,20 +250,20 @@ int __init davinci_timer_register(struct clk *clk,
 
 	rv = clk_prepare_enable(clk);
 	if (rv) {
-		pr_err("Unable to prepare and enable the timer clock");
+		pr_err("Unable to prepare and enable the timer clock\n");
 		return rv;
 	}
 
 	if (!request_mem_region(timer_cfg->reg.start,
 				resource_size(&timer_cfg->reg),
 				"davinci-timer")) {
-		pr_err("Unable to request memory region");
+		pr_err("Unable to request memory region\n");
 		return -EBUSY;
 	}
 
 	base = ioremap(timer_cfg->reg.start, resource_size(&timer_cfg->reg));
 	if (!base) {
-		pr_err("Unable to map the register range");
+		pr_err("Unable to map the register range\n");
 		return -ENOMEM;
 	}
 
@@ -271,10 +271,8 @@ int __init davinci_timer_register(struct clk *clk,
 	tick_rate = clk_get_rate(clk);
 
 	clockevent = kzalloc(sizeof(*clockevent), GFP_KERNEL | __GFP_NOFAIL);
-	if (!clockevent) {
-		pr_err("Error allocating memory for clockevent data");
+	if (!clockevent)
 		return -ENOMEM;
-	}
 
 	clockevent->dev.name = "tim12";
 	clockevent->dev.features = CLOCK_EVT_FEAT_ONESHOT;
@@ -298,7 +296,7 @@ int __init davinci_timer_register(struct clk *clk,
 			 davinci_timer_irq_timer, IRQF_TIMER,
 			 "clockevent/tim12", clockevent);
 	if (rv) {
-		pr_err("Unable to request the clockevent interrupt");
+		pr_err("Unable to request the clockevent interrupt\n");
 		return rv;
 	}
 
@@ -325,7 +323,7 @@ int __init davinci_timer_register(struct clk *clk,
 
 	rv = clocksource_register_hz(&davinci_clocksource.dev, tick_rate);
 	if (rv) {
-		pr_err("Unable to register clocksource");
+		pr_err("Unable to register clocksource\n");
 		return rv;
 	}
 
@@ -343,20 +341,20 @@ static int __init of_davinci_timer_register(struct device_node *np)
 
 	rv = of_address_to_resource(np, 0, &timer_cfg.reg);
 	if (rv) {
-		pr_err("Unable to get the register range for timer");
+		pr_err("Unable to get the register range for timer\n");
 		return rv;
 	}
 
 	rv = of_irq_to_resource_table(np, timer_cfg.irq,
 				      DAVINCI_TIMER_NUM_IRQS);
 	if (rv != DAVINCI_TIMER_NUM_IRQS) {
-		pr_err("Unable to get the interrupts for timer");
+		pr_err("Unable to get the interrupts for timer\n");
 		return rv;
 	}
 
 	clk = of_clk_get(np, 0);
 	if (IS_ERR(clk)) {
-		pr_err("Unable to get the timer clock");
+		pr_err("Unable to get the timer clock\n");
 		return PTR_ERR(clk);
 	}