From: Robin Gong <yibin.gong@nxp.com> To: mark.rutland@arm.com, broonie@kernel.org, robh+dt@kernel.org, catalin.marinas@arm.com, vkoul@kernel.org, will.deacon@arm.com, shawnguo@kernel.org, festevam@gmail.com, s.hauer@pengutronix.de, martin.fuzzey@flowbird.group, u.kleine-koenig@pengutronix.de, dan.j.williams@intel.com, matthias.schiffer@ew.tq-group.com Cc: linux-spi@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, kernel@pengutronix.de, linux-imx@nxp.com, dmaengine@vger.kernel.org Subject: [PATCH v9 14/14] dmaengine: imx-sdma: add uart rom script Date: Sat, 6 Jun 2020 05:32:35 +0800 [thread overview] Message-ID: <1591392755-19136-15-git-send-email-yibin.gong@nxp.com> (raw) In-Reply-To: <1591392755-19136-1-git-send-email-yibin.gong@nxp.com> For the compatibility of NXP internal legacy kernel before 4.19 which is based on uart ram script and upstreaming kernel based on uart rom script, add both uart ram/rom script in latest sdma firmware. By default uart rom script used. Besides, add two multi-fifo scripts for SAI/PDM on i.mx8m/8mm and add back qspi script miss for v4(i.mx7d/8m/8mm family, but v3 is for i.mx6). rom script: uart_2_mcu_addr uartsh_2_mcu_addr /* through spba bus */ am script: uart_2_mcu_ram_addr uartsh_2_mcu_ram_addr /* through spba bus */ Please get latest sdma firmware from the below and put them into the path (/lib/firmware/imx/sdma/): https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git /tree/imx/sdma Signed-off-by: Robin Gong <yibin.gong@nxp.com> Acked-by: Vinod Koul <vkoul@kernel.org> --- drivers/dma/imx-sdma.c | 4 ++-- include/linux/platform_data/dma-imx-sdma.h | 8 ++++++-- 2 files changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index 320104f..2ca7935 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -1718,8 +1718,8 @@ static void sdma_issue_pending(struct dma_chan *chan) #define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1 34 #define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V2 38 -#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3 41 -#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V4 42 +#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3 45 +#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V4 46 static void sdma_add_scripts(struct sdma_engine *sdma, const struct sdma_script_start_addrs *addr) diff --git a/include/linux/platform_data/dma-imx-sdma.h b/include/linux/platform_data/dma-imx-sdma.h index 30e676b..e12d2e8 100644 --- a/include/linux/platform_data/dma-imx-sdma.h +++ b/include/linux/platform_data/dma-imx-sdma.h @@ -20,12 +20,12 @@ struct sdma_script_start_addrs { s32 per_2_firi_addr; s32 mcu_2_firi_addr; s32 uart_2_per_addr; - s32 uart_2_mcu_addr; + s32 uart_2_mcu_ram_addr; s32 per_2_app_addr; s32 mcu_2_app_addr; s32 per_2_per_addr; s32 uartsh_2_per_addr; - s32 uartsh_2_mcu_addr; + s32 uartsh_2_mcu_ram_addr; s32 per_2_shp_addr; s32 mcu_2_shp_addr; s32 ata_2_mcu_addr; @@ -52,6 +52,10 @@ struct sdma_script_start_addrs { s32 zcanfd_2_mcu_addr; s32 zqspi_2_mcu_addr; s32 mcu_2_ecspi_addr; + s32 mcu_2_sai_addr; + s32 sai_2_mcu_addr; + s32 uart_2_mcu_addr; + s32 uartsh_2_mcu_addr; /* End of v3 array */ s32 mcu_2_zqspi_addr; /* End of v4 array */ -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Robin Gong <yibin.gong@nxp.com> To: mark.rutland@arm.com, broonie@kernel.org, robh+dt@kernel.org, catalin.marinas@arm.com, vkoul@kernel.org, will.deacon@arm.com, shawnguo@kernel.org, festevam@gmail.com, s.hauer@pengutronix.de, martin.fuzzey@flowbird.group, u.kleine-koenig@pengutronix.de, dan.j.williams@intel.com, matthias.schiffer@ew.tq-group.com Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-spi@vger.kernel.org, linux-imx@nxp.com, kernel@pengutronix.de, dmaengine@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v9 14/14] dmaengine: imx-sdma: add uart rom script Date: Sat, 6 Jun 2020 05:32:35 +0800 [thread overview] Message-ID: <1591392755-19136-15-git-send-email-yibin.gong@nxp.com> (raw) In-Reply-To: <1591392755-19136-1-git-send-email-yibin.gong@nxp.com> For the compatibility of NXP internal legacy kernel before 4.19 which is based on uart ram script and upstreaming kernel based on uart rom script, add both uart ram/rom script in latest sdma firmware. By default uart rom script used. Besides, add two multi-fifo scripts for SAI/PDM on i.mx8m/8mm and add back qspi script miss for v4(i.mx7d/8m/8mm family, but v3 is for i.mx6). rom script: uart_2_mcu_addr uartsh_2_mcu_addr /* through spba bus */ am script: uart_2_mcu_ram_addr uartsh_2_mcu_ram_addr /* through spba bus */ Please get latest sdma firmware from the below and put them into the path (/lib/firmware/imx/sdma/): https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git /tree/imx/sdma Signed-off-by: Robin Gong <yibin.gong@nxp.com> Acked-by: Vinod Koul <vkoul@kernel.org> --- drivers/dma/imx-sdma.c | 4 ++-- include/linux/platform_data/dma-imx-sdma.h | 8 ++++++-- 2 files changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index 320104f..2ca7935 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -1718,8 +1718,8 @@ static void sdma_issue_pending(struct dma_chan *chan) #define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1 34 #define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V2 38 -#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3 41 -#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V4 42 +#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3 45 +#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V4 46 static void sdma_add_scripts(struct sdma_engine *sdma, const struct sdma_script_start_addrs *addr) diff --git a/include/linux/platform_data/dma-imx-sdma.h b/include/linux/platform_data/dma-imx-sdma.h index 30e676b..e12d2e8 100644 --- a/include/linux/platform_data/dma-imx-sdma.h +++ b/include/linux/platform_data/dma-imx-sdma.h @@ -20,12 +20,12 @@ struct sdma_script_start_addrs { s32 per_2_firi_addr; s32 mcu_2_firi_addr; s32 uart_2_per_addr; - s32 uart_2_mcu_addr; + s32 uart_2_mcu_ram_addr; s32 per_2_app_addr; s32 mcu_2_app_addr; s32 per_2_per_addr; s32 uartsh_2_per_addr; - s32 uartsh_2_mcu_addr; + s32 uartsh_2_mcu_ram_addr; s32 per_2_shp_addr; s32 mcu_2_shp_addr; s32 ata_2_mcu_addr; @@ -52,6 +52,10 @@ struct sdma_script_start_addrs { s32 zcanfd_2_mcu_addr; s32 zqspi_2_mcu_addr; s32 mcu_2_ecspi_addr; + s32 mcu_2_sai_addr; + s32 sai_2_mcu_addr; + s32 uart_2_mcu_addr; + s32 uartsh_2_mcu_addr; /* End of v3 array */ s32 mcu_2_zqspi_addr; /* End of v4 array */ -- 2.7.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-06-05 13:33 UTC|newest] Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-06-05 21:32 [PATCH v9 00/14] add ecspi ERR009165 for i.mx6/7 soc family Robin Gong 2020-06-05 21:32 ` Robin Gong 2020-06-05 21:32 ` [PATCH v9 01/14] Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core" Robin Gong 2020-06-05 21:32 ` Robin Gong 2020-06-05 21:32 ` [PATCH v9 02/14] Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores" Robin Gong 2020-06-05 21:32 ` Robin Gong 2020-06-05 21:32 ` [PATCH v9 03/14] Revert "dmaengine: imx-sdma: refine to load context only once" Robin Gong 2020-06-05 21:32 ` Robin Gong 2020-06-05 21:32 ` [PATCH v9 04/14] dmaengine: imx-sdma: remove duplicated sdma_load_context Robin Gong 2020-06-05 21:32 ` Robin Gong 2020-06-05 21:32 ` [PATCH v9 05/14] spi: imx: fallback to PIO if dma setup failure Robin Gong 2020-06-05 21:32 ` Robin Gong 2020-06-05 15:01 ` Mark Brown 2020-06-05 15:01 ` Mark Brown 2020-06-05 21:32 ` [PATCH v9 06/14] spi: imx: add dma_sync_sg_for_device after fallback from dma Robin Gong 2020-06-05 21:32 ` Robin Gong 2020-06-05 21:32 ` [PATCH v9 07/14] dmaengine: imx-sdma: add mcu_2_ecspi script Robin Gong 2020-06-05 21:32 ` Robin Gong 2020-06-05 21:32 ` [PATCH v9 08/14] spi: imx: fix ERR009165 Robin Gong 2020-06-05 21:32 ` Robin Gong 2020-06-05 21:32 ` [PATCH v9 09/14] spi: imx: remove ERR009165 workaround on i.mx6ul Robin Gong 2020-06-05 21:32 ` Robin Gong 2020-06-05 21:32 ` [PATCH v9 10/14] spi: imx: add new i.mx6ul compatible name in binding doc Robin Gong 2020-06-05 21:32 ` Robin Gong 2020-06-05 21:32 ` [PATCH v9 11/14] dmaengine: imx-sdma: remove ERR009165 on i.mx6ul Robin Gong 2020-06-05 21:32 ` Robin Gong 2020-06-05 21:32 ` [PATCH v9 12/14] dma: imx-sdma: add i.mx6ul compatible name Robin Gong 2020-06-05 21:32 ` Robin Gong 2020-06-05 21:32 ` [PATCH v9 13/14] dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm Robin Gong 2020-06-05 21:32 ` Robin Gong 2020-06-05 21:32 ` Robin Gong [this message] 2020-06-05 21:32 ` [PATCH v9 14/14] dmaengine: imx-sdma: add uart rom script Robin Gong
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1591392755-19136-15-git-send-email-yibin.gong@nxp.com \ --to=yibin.gong@nxp.com \ --cc=broonie@kernel.org \ --cc=catalin.marinas@arm.com \ --cc=dan.j.williams@intel.com \ --cc=devicetree@vger.kernel.org \ --cc=dmaengine@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=kernel@pengutronix.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-spi@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=martin.fuzzey@flowbird.group \ --cc=matthias.schiffer@ew.tq-group.com \ --cc=robh+dt@kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=shawnguo@kernel.org \ --cc=u.kleine-koenig@pengutronix.de \ --cc=vkoul@kernel.org \ --cc=will.deacon@arm.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.