[PATCH net-next v3 3/7] net: fman: add kr support for dpaa1 mac

[Florinel Iordache <florinel.iordache@nxp.com>]

Add kr support in mac driver for dpaa1

Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com>
---
 drivers/net/ethernet/freescale/fman/mac.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fman/mac.c b/drivers/net/ethernet/freescale/fman/mac.c
index 43427c5..90fe594 100644
--- a/drivers/net/ethernet/freescale/fman/mac.c
+++ b/drivers/net/ethernet/freescale/fman/mac.c
@@ -1,4 +1,5 @@
 /* Copyright 2008-2015 Freescale Semiconductor, Inc.
+ * Copyright 2020 NXP
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -220,6 +221,7 @@ static int memac_initialization(struct mac_device *mac_dev)
 
 	set_fman_mac_params(mac_dev, &params);
 
+	/* use XGMII mode for all 10G interfaces to setup memac */
 	if (priv->max_speed == SPEED_10000)
 		params.phy_if = PHY_INTERFACE_MODE_XGMII;
 
@@ -540,7 +542,8 @@ static void setup_memac(struct mac_device *mac_dev)
 	[PHY_INTERFACE_MODE_RGMII_TXID]	= SPEED_1000,
 	[PHY_INTERFACE_MODE_RTBI]		= SPEED_1000,
 	[PHY_INTERFACE_MODE_QSGMII]		= SPEED_1000,
-	[PHY_INTERFACE_MODE_XGMII]		= SPEED_10000
+	[PHY_INTERFACE_MODE_XGMII]		= SPEED_10000,
+	[PHY_INTERFACE_MODE_10GKR]		= SPEED_10000
 };
 
 static struct platform_device *dpaa_eth_add_device(int fman_id,
@@ -795,9 +798,12 @@ static int mac_probe(struct platform_device *_of_dev)
 	if (priv->max_speed == 1000)
 		mac_dev->if_support |= SUPPORTED_1000baseT_Full;
 
-	/* The 10G interface only supports one mode */
+	/* Supported 10G interfaces */
 	if (mac_dev->phy_if == PHY_INTERFACE_MODE_XGMII)
 		mac_dev->if_support = SUPPORTED_10000baseT_Full;
+	/* Supported KR interfaces */
+	if (mac_dev->phy_if == PHY_INTERFACE_MODE_10GKR)
+		mac_dev->if_support = SUPPORTED_10000baseKR_Full;
 
 	/* Get the rest of the PHY information */
 	mac_dev->phy_node = of_parse_phandle(mac_node, "phy-handle", 0);
-- 
1.9.1