[PATCH V6 0/9] Support i.MX8 SoCs pinctrl drivers built as module

[PATCH V6 0/9] Support i.MX8 SoCs pinctrl drivers built as module

[Anson Huang]

There are more and mroe requirements that SoC specific modules should be built
as module in order to support generic kernel image, such as Android GKI concept.

This patch series supports i.MX8 SoCs pinctrl drivers to be built as module,
including i.MX8MQ/MM/MN/MP/QXP/QM/DXL SoCs, i.MX common pinctrl driver and i.MX
SCU common pinctrl driver as still built-in.

Compared to V5, the changes are as below:
        - Keep i.MX common pinctrl libary built in, ONLY i.MX SoC pinctrl driver
          support built as module.

Anson Huang (9):
  pinctrl: imx: Support i.MX8 SoCs pinctrl driver built as module
  pinctrl: imx: scu: Support i.MX8 SCU SoCs pinctrl driver built as
    module
  pinctrl: imx8mm: Support building as module
  pinctrl: imx8mn: Support building as module
  pinctrl: imx8mq: Support building as module
  pinctrl: imx8mp: Support building as module
  pinctrl: imx8qxp: Support building as module
  pinctrl: imx8qm: Support building as module
  pinctrl: imx8dxl: Support building as module

 drivers/pinctrl/freescale/Kconfig           | 14 +++++++-------
 drivers/pinctrl/freescale/pinctrl-imx.c     |  2 ++
 drivers/pinctrl/freescale/pinctrl-imx8dxl.c |  5 +++++
 drivers/pinctrl/freescale/pinctrl-imx8mm.c  |  6 ++++++
 drivers/pinctrl/freescale/pinctrl-imx8mn.c  |  6 ++++++
 drivers/pinctrl/freescale/pinctrl-imx8mp.c  |  6 ++++++
 drivers/pinctrl/freescale/pinctrl-imx8mq.c  |  6 ++++++
 drivers/pinctrl/freescale/pinctrl-imx8qm.c  |  5 +++++
 drivers/pinctrl/freescale/pinctrl-imx8qxp.c |  5 +++++
 drivers/pinctrl/freescale/pinctrl-scu.c     |  4 ++++
 10 files changed, 52 insertions(+), 7 deletions(-)

-- 
2.7.4

[PATCH V6 0/9] Support i.MX8 SoCs pinctrl drivers built as module

[Anson Huang]

There are more and mroe requirements that SoC specific modules should be built
as module in order to support generic kernel image, such as Android GKI concept.

This patch series supports i.MX8 SoCs pinctrl drivers to be built as module,
including i.MX8MQ/MM/MN/MP/QXP/QM/DXL SoCs, i.MX common pinctrl driver and i.MX
SCU common pinctrl driver as still built-in.

Compared to V5, the changes are as below:
        - Keep i.MX common pinctrl libary built in, ONLY i.MX SoC pinctrl driver
          support built as module.

Anson Huang (9):
  pinctrl: imx: Support i.MX8 SoCs pinctrl driver built as module
  pinctrl: imx: scu: Support i.MX8 SCU SoCs pinctrl driver built as
    module
  pinctrl: imx8mm: Support building as module
  pinctrl: imx8mn: Support building as module
  pinctrl: imx8mq: Support building as module
  pinctrl: imx8mp: Support building as module
  pinctrl: imx8qxp: Support building as module
  pinctrl: imx8qm: Support building as module
  pinctrl: imx8dxl: Support building as module

 drivers/pinctrl/freescale/Kconfig           | 14 +++++++-------
 drivers/pinctrl/freescale/pinctrl-imx.c     |  2 ++
 drivers/pinctrl/freescale/pinctrl-imx8dxl.c |  5 +++++
 drivers/pinctrl/freescale/pinctrl-imx8mm.c  |  6 ++++++
 drivers/pinctrl/freescale/pinctrl-imx8mn.c  |  6 ++++++
 drivers/pinctrl/freescale/pinctrl-imx8mp.c  |  6 ++++++
 drivers/pinctrl/freescale/pinctrl-imx8mq.c  |  6 ++++++
 drivers/pinctrl/freescale/pinctrl-imx8qm.c  |  5 +++++
 drivers/pinctrl/freescale/pinctrl-imx8qxp.c |  5 +++++
 drivers/pinctrl/freescale/pinctrl-scu.c     |  4 ++++
 10 files changed, 52 insertions(+), 7 deletions(-)

-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH V6 1/9] pinctrl: imx: Support i.MX8 SoCs pinctrl driver built as module

[Anson Huang]

Export necessary APIs to support i.MX8 SoCs pinctrl driver to be
built as module.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
Changes since V5:
	- keep it still built in, ONLY export APIs for SoCs pinctrl driver;
---
 drivers/pinctrl/freescale/pinctrl-imx.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/pinctrl/freescale/pinctrl-imx.c b/drivers/pinctrl/freescale/pinctrl-imx.c
index 1f81569..507e4af 100644
--- a/drivers/pinctrl/freescale/pinctrl-imx.c
+++ b/drivers/pinctrl/freescale/pinctrl-imx.c
@@ -877,6 +877,7 @@ int imx_pinctrl_probe(struct platform_device *pdev,
 
 	return pinctrl_enable(ipctl->pctl);
 }
+EXPORT_SYMBOL_GPL(imx_pinctrl_probe);
 
 static int __maybe_unused imx_pinctrl_suspend(struct device *dev)
 {
@@ -896,3 +897,4 @@ const struct dev_pm_ops imx_pinctrl_pm_ops = {
 	SET_LATE_SYSTEM_SLEEP_PM_OPS(imx_pinctrl_suspend,
 					imx_pinctrl_resume)
 };
+EXPORT_SYMBOL_GPL(imx_pinctrl_pm_ops);
-- 
2.7.4

[PATCH V6 1/9] pinctrl: imx: Support i.MX8 SoCs pinctrl driver built as module

[Anson Huang]

Export necessary APIs to support i.MX8 SoCs pinctrl driver to be
built as module.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
Changes since V5:
	- keep it still built in, ONLY export APIs for SoCs pinctrl driver;
---
 drivers/pinctrl/freescale/pinctrl-imx.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/pinctrl/freescale/pinctrl-imx.c b/drivers/pinctrl/freescale/pinctrl-imx.c
index 1f81569..507e4af 100644
--- a/drivers/pinctrl/freescale/pinctrl-imx.c
+++ b/drivers/pinctrl/freescale/pinctrl-imx.c
@@ -877,6 +877,7 @@ int imx_pinctrl_probe(struct platform_device *pdev,
 
 	return pinctrl_enable(ipctl->pctl);
 }
+EXPORT_SYMBOL_GPL(imx_pinctrl_probe);
 
 static int __maybe_unused imx_pinctrl_suspend(struct device *dev)
 {
@@ -896,3 +897,4 @@ const struct dev_pm_ops imx_pinctrl_pm_ops = {
 	SET_LATE_SYSTEM_SLEEP_PM_OPS(imx_pinctrl_suspend,
 					imx_pinctrl_resume)
 };
+EXPORT_SYMBOL_GPL(imx_pinctrl_pm_ops);
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH V6 2/9] pinctrl: imx: scu: Support i.MX8 SCU SoCs pinctrl driver built as module

[Anson Huang]

Export necessary APIs to support i.MX8 SCU SoCs pinctrl driver to be
built as module.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
Changes since V5:
	- keep it still built in, ONLY export APIs for SoCs pinctrl driver;
---
 drivers/pinctrl/freescale/pinctrl-scu.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/pinctrl/freescale/pinctrl-scu.c b/drivers/pinctrl/freescale/pinctrl-scu.c
index 23cf04b..9df45d3 100644
--- a/drivers/pinctrl/freescale/pinctrl-scu.c
+++ b/drivers/pinctrl/freescale/pinctrl-scu.c
@@ -41,6 +41,7 @@ int imx_pinctrl_sc_ipc_init(struct platform_device *pdev)
 {
 	return imx_scu_get_handle(&pinctrl_ipc_handle);
 }
+EXPORT_SYMBOL_GPL(imx_pinctrl_sc_ipc_init);
 
 int imx_pinconf_get_scu(struct pinctrl_dev *pctldev, unsigned pin_id,
 			unsigned long *config)
@@ -66,6 +67,7 @@ int imx_pinconf_get_scu(struct pinctrl_dev *pctldev, unsigned pin_id,
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(imx_pinconf_get_scu);
 
 int imx_pinconf_set_scu(struct pinctrl_dev *pctldev, unsigned pin_id,
 			unsigned long *configs, unsigned num_configs)
@@ -101,6 +103,7 @@ int imx_pinconf_set_scu(struct pinctrl_dev *pctldev, unsigned pin_id,
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(imx_pinconf_set_scu);
 
 void imx_pinctrl_parse_pin_scu(struct imx_pinctrl *ipctl,
 			       unsigned int *pin_id, struct imx_pin *pin,
@@ -119,3 +122,4 @@ void imx_pinctrl_parse_pin_scu(struct imx_pinctrl *ipctl,
 	dev_dbg(ipctl->dev, "%s: 0x%x 0x%08lx", info->pins[pin->pin].name,
 		pin_scu->mux_mode, pin_scu->config);
 }
+EXPORT_SYMBOL_GPL(imx_pinctrl_parse_pin_scu);
-- 
2.7.4

[PATCH V6 2/9] pinctrl: imx: scu: Support i.MX8 SCU SoCs pinctrl driver built as module

[Anson Huang]

Export necessary APIs to support i.MX8 SCU SoCs pinctrl driver to be
built as module.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
Changes since V5:
	- keep it still built in, ONLY export APIs for SoCs pinctrl driver;
---
 drivers/pinctrl/freescale/pinctrl-scu.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/pinctrl/freescale/pinctrl-scu.c b/drivers/pinctrl/freescale/pinctrl-scu.c
index 23cf04b..9df45d3 100644
--- a/drivers/pinctrl/freescale/pinctrl-scu.c
+++ b/drivers/pinctrl/freescale/pinctrl-scu.c
@@ -41,6 +41,7 @@ int imx_pinctrl_sc_ipc_init(struct platform_device *pdev)
 {
 	return imx_scu_get_handle(&pinctrl_ipc_handle);
 }
+EXPORT_SYMBOL_GPL(imx_pinctrl_sc_ipc_init);
 
 int imx_pinconf_get_scu(struct pinctrl_dev *pctldev, unsigned pin_id,
 			unsigned long *config)
@@ -66,6 +67,7 @@ int imx_pinconf_get_scu(struct pinctrl_dev *pctldev, unsigned pin_id,
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(imx_pinconf_get_scu);
 
 int imx_pinconf_set_scu(struct pinctrl_dev *pctldev, unsigned pin_id,
 			unsigned long *configs, unsigned num_configs)
@@ -101,6 +103,7 @@ int imx_pinconf_set_scu(struct pinctrl_dev *pctldev, unsigned pin_id,
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(imx_pinconf_set_scu);
 
 void imx_pinctrl_parse_pin_scu(struct imx_pinctrl *ipctl,
 			       unsigned int *pin_id, struct imx_pin *pin,
@@ -119,3 +122,4 @@ void imx_pinctrl_parse_pin_scu(struct imx_pinctrl *ipctl,
 	dev_dbg(ipctl->dev, "%s: 0x%x 0x%08lx", info->pins[pin->pin].name,
 		pin_scu->mux_mode, pin_scu->config);
 }
+EXPORT_SYMBOL_GPL(imx_pinctrl_parse_pin_scu);
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH V6 3/9] pinctrl: imx8mm: Support building as module

[Anson Huang]

Change configuration to "tristate", add module device table,
author, description and license to support building i.MX8MM
pinctrl driver as module.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
No change.
---
 drivers/pinctrl/freescale/Kconfig          | 2 +-
 drivers/pinctrl/freescale/pinctrl-imx8mm.c | 6 ++++++
 2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/freescale/Kconfig b/drivers/pinctrl/freescale/Kconfig
index 4ca44dd..3681c4d 100644
--- a/drivers/pinctrl/freescale/Kconfig
+++ b/drivers/pinctrl/freescale/Kconfig
@@ -124,7 +124,7 @@ config PINCTRL_IMX7ULP
 	  Say Y here to enable the imx7ulp pinctrl driver
 
 config PINCTRL_IMX8MM
-	bool "IMX8MM pinctrl driver"
+	tristate "IMX8MM pinctrl driver"
 	depends on ARCH_MXC
 	select PINCTRL_IMX
 	help
diff --git a/drivers/pinctrl/freescale/pinctrl-imx8mm.c b/drivers/pinctrl/freescale/pinctrl-imx8mm.c
index 6d1038a..31c5d88 100644
--- a/drivers/pinctrl/freescale/pinctrl-imx8mm.c
+++ b/drivers/pinctrl/freescale/pinctrl-imx8mm.c
@@ -5,6 +5,7 @@
 
 #include <linux/err.h>
 #include <linux/init.h>
+#include <linux/module.h>
 #include <linux/of_device.h>
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/platform_device.h>
@@ -326,6 +327,7 @@ static const struct of_device_id imx8mm_pinctrl_of_match[] = {
 	{ .compatible = "fsl,imx8mm-iomuxc", .data = &imx8mm_pinctrl_info, },
 	{ /* sentinel */ }
 };
+MODULE_DEVICE_TABLE(of, imx8mm_pinctrl_of_match);
 
 static int imx8mm_pinctrl_probe(struct platform_device *pdev)
 {
@@ -346,3 +348,7 @@ static int __init imx8mm_pinctrl_init(void)
 	return platform_driver_register(&imx8mm_pinctrl_driver);
 }
 arch_initcall(imx8mm_pinctrl_init);
+
+MODULE_AUTHOR("Bai Ping <ping.bai@nxp.com>");
+MODULE_DESCRIPTION("NXP i.MX8MM pinctrl driver");
+MODULE_LICENSE("GPL v2");
-- 
2.7.4

[PATCH V6 3/9] pinctrl: imx8mm: Support building as module

[Anson Huang]

Change configuration to "tristate", add module device table,
author, description and license to support building i.MX8MM
pinctrl driver as module.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
No change.
---
 drivers/pinctrl/freescale/Kconfig          | 2 +-
 drivers/pinctrl/freescale/pinctrl-imx8mm.c | 6 ++++++
 2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/freescale/Kconfig b/drivers/pinctrl/freescale/Kconfig
index 4ca44dd..3681c4d 100644
--- a/drivers/pinctrl/freescale/Kconfig
+++ b/drivers/pinctrl/freescale/Kconfig
@@ -124,7 +124,7 @@ config PINCTRL_IMX7ULP
 	  Say Y here to enable the imx7ulp pinctrl driver
 
 config PINCTRL_IMX8MM
-	bool "IMX8MM pinctrl driver"
+	tristate "IMX8MM pinctrl driver"
 	depends on ARCH_MXC
 	select PINCTRL_IMX
 	help
diff --git a/drivers/pinctrl/freescale/pinctrl-imx8mm.c b/drivers/pinctrl/freescale/pinctrl-imx8mm.c
index 6d1038a..31c5d88 100644
--- a/drivers/pinctrl/freescale/pinctrl-imx8mm.c
+++ b/drivers/pinctrl/freescale/pinctrl-imx8mm.c
@@ -5,6 +5,7 @@
 
 #include <linux/err.h>
 #include <linux/init.h>
+#include <linux/module.h>
 #include <linux/of_device.h>
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/platform_device.h>
@@ -326,6 +327,7 @@ static const struct of_device_id imx8mm_pinctrl_of_match[] = {
 	{ .compatible = "fsl,imx8mm-iomuxc", .data = &imx8mm_pinctrl_info, },
 	{ /* sentinel */ }
 };
+MODULE_DEVICE_TABLE(of, imx8mm_pinctrl_of_match);
 
 static int imx8mm_pinctrl_probe(struct platform_device *pdev)
 {
@@ -346,3 +348,7 @@ static int __init imx8mm_pinctrl_init(void)
 	return platform_driver_register(&imx8mm_pinctrl_driver);
 }
 arch_initcall(imx8mm_pinctrl_init);
+
+MODULE_AUTHOR("Bai Ping <ping.bai@nxp.com>");
+MODULE_DESCRIPTION("NXP i.MX8MM pinctrl driver");
+MODULE_LICENSE("GPL v2");
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH V6 4/9] pinctrl: imx8mn: Support building as module

[Anson Huang]

Change configuration to "tristate", add module device table,
author, description and license to support building i.MX8MN
pinctrl driver as module.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
No change.
---
 drivers/pinctrl/freescale/Kconfig          | 2 +-
 drivers/pinctrl/freescale/pinctrl-imx8mn.c | 6 ++++++
 2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/freescale/Kconfig b/drivers/pinctrl/freescale/Kconfig
index 3681c4d..b909719 100644
--- a/drivers/pinctrl/freescale/Kconfig
+++ b/drivers/pinctrl/freescale/Kconfig
@@ -131,7 +131,7 @@ config PINCTRL_IMX8MM
 	  Say Y here to enable the imx8mm pinctrl driver
 
 config PINCTRL_IMX8MN
-	bool "IMX8MN pinctrl driver"
+	tristate "IMX8MN pinctrl driver"
 	depends on ARCH_MXC
 	select PINCTRL_IMX
 	help
diff --git a/drivers/pinctrl/freescale/pinctrl-imx8mn.c b/drivers/pinctrl/freescale/pinctrl-imx8mn.c
index 100ed8c..14c9deb 100644
--- a/drivers/pinctrl/freescale/pinctrl-imx8mn.c
+++ b/drivers/pinctrl/freescale/pinctrl-imx8mn.c
@@ -5,6 +5,7 @@
 
 #include <linux/err.h>
 #include <linux/init.h>
+#include <linux/module.h>
 #include <linux/of.h>
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/platform_device.h>
@@ -326,6 +327,7 @@ static const struct of_device_id imx8mn_pinctrl_of_match[] = {
 	{ .compatible = "fsl,imx8mn-iomuxc", .data = &imx8mn_pinctrl_info, },
 	{ /* sentinel */ }
 };
+MODULE_DEVICE_TABLE(of, imx8mn_pinctrl_of_match);
 
 static int imx8mn_pinctrl_probe(struct platform_device *pdev)
 {
@@ -346,3 +348,7 @@ static int __init imx8mn_pinctrl_init(void)
 	return platform_driver_register(&imx8mn_pinctrl_driver);
 }
 arch_initcall(imx8mn_pinctrl_init);
+
+MODULE_AUTHOR("Anson Huang <Anson.Huang@nxp.com>");
+MODULE_DESCRIPTION("NXP i.MX8MN pinctrl driver");
+MODULE_LICENSE("GPL v2");
-- 
2.7.4

[PATCH V6 4/9] pinctrl: imx8mn: Support building as module

[Anson Huang]

Change configuration to "tristate", add module device table,
author, description and license to support building i.MX8MN
pinctrl driver as module.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
No change.
---
 drivers/pinctrl/freescale/Kconfig          | 2 +-
 drivers/pinctrl/freescale/pinctrl-imx8mn.c | 6 ++++++
 2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/freescale/Kconfig b/drivers/pinctrl/freescale/Kconfig
index 3681c4d..b909719 100644
--- a/drivers/pinctrl/freescale/Kconfig
+++ b/drivers/pinctrl/freescale/Kconfig
@@ -131,7 +131,7 @@ config PINCTRL_IMX8MM
 	  Say Y here to enable the imx8mm pinctrl driver
 
 config PINCTRL_IMX8MN
-	bool "IMX8MN pinctrl driver"
+	tristate "IMX8MN pinctrl driver"
 	depends on ARCH_MXC
 	select PINCTRL_IMX
 	help
diff --git a/drivers/pinctrl/freescale/pinctrl-imx8mn.c b/drivers/pinctrl/freescale/pinctrl-imx8mn.c
index 100ed8c..14c9deb 100644
--- a/drivers/pinctrl/freescale/pinctrl-imx8mn.c
+++ b/drivers/pinctrl/freescale/pinctrl-imx8mn.c
@@ -5,6 +5,7 @@
 
 #include <linux/err.h>
 #include <linux/init.h>
+#include <linux/module.h>
 #include <linux/of.h>
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/platform_device.h>
@@ -326,6 +327,7 @@ static const struct of_device_id imx8mn_pinctrl_of_match[] = {
 	{ .compatible = "fsl,imx8mn-iomuxc", .data = &imx8mn_pinctrl_info, },
 	{ /* sentinel */ }
 };
+MODULE_DEVICE_TABLE(of, imx8mn_pinctrl_of_match);
 
 static int imx8mn_pinctrl_probe(struct platform_device *pdev)
 {
@@ -346,3 +348,7 @@ static int __init imx8mn_pinctrl_init(void)
 	return platform_driver_register(&imx8mn_pinctrl_driver);
 }
 arch_initcall(imx8mn_pinctrl_init);
+
+MODULE_AUTHOR("Anson Huang <Anson.Huang@nxp.com>");
+MODULE_DESCRIPTION("NXP i.MX8MN pinctrl driver");
+MODULE_LICENSE("GPL v2");
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH V6 5/9] pinctrl: imx8mq: Support building as module

[Anson Huang]

Change configuration to "tristate", add module device table,
author, description and license to support building i.MX8MQ
pinctrl driver as module.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
No change.
---
 drivers/pinctrl/freescale/Kconfig          | 2 +-
 drivers/pinctrl/freescale/pinctrl-imx8mq.c | 6 ++++++
 2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/freescale/Kconfig b/drivers/pinctrl/freescale/Kconfig
index b909719..df77e752 100644
--- a/drivers/pinctrl/freescale/Kconfig
+++ b/drivers/pinctrl/freescale/Kconfig
@@ -145,7 +145,7 @@ config PINCTRL_IMX8MP
 	  Say Y here to enable the imx8mp pinctrl driver
 
 config PINCTRL_IMX8MQ
-	bool "IMX8MQ pinctrl driver"
+	tristate "IMX8MQ pinctrl driver"
 	depends on ARCH_MXC
 	select PINCTRL_IMX
 	help
diff --git a/drivers/pinctrl/freescale/pinctrl-imx8mq.c b/drivers/pinctrl/freescale/pinctrl-imx8mq.c
index 50aa1c0..ae3ea5b 100644
--- a/drivers/pinctrl/freescale/pinctrl-imx8mq.c
+++ b/drivers/pinctrl/freescale/pinctrl-imx8mq.c
@@ -8,6 +8,7 @@
 #include <linux/err.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/pinctrl/pinctrl.h>
@@ -329,6 +330,7 @@ static const struct of_device_id imx8mq_pinctrl_of_match[] = {
 	{ .compatible = "fsl,imx8mq-iomuxc", .data = &imx8mq_pinctrl_info, },
 	{ /* sentinel */ }
 };
+MODULE_DEVICE_TABLE(of, imx8mq_pinctrl_of_match);
 
 static int imx8mq_pinctrl_probe(struct platform_device *pdev)
 {
@@ -350,3 +352,7 @@ static int __init imx8mq_pinctrl_init(void)
 	return platform_driver_register(&imx8mq_pinctrl_driver);
 }
 arch_initcall(imx8mq_pinctrl_init);
+
+MODULE_AUTHOR("Lucas Stach <l.stach@pengutronix.de>");
+MODULE_DESCRIPTION("NXP i.MX8MQ pinctrl driver");
+MODULE_LICENSE("GPL v2");
-- 
2.7.4

[PATCH V6 5/9] pinctrl: imx8mq: Support building as module

[Anson Huang]

Change configuration to "tristate", add module device table,
author, description and license to support building i.MX8MQ
pinctrl driver as module.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
No change.
---
 drivers/pinctrl/freescale/Kconfig          | 2 +-
 drivers/pinctrl/freescale/pinctrl-imx8mq.c | 6 ++++++
 2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/freescale/Kconfig b/drivers/pinctrl/freescale/Kconfig
index b909719..df77e752 100644
--- a/drivers/pinctrl/freescale/Kconfig
+++ b/drivers/pinctrl/freescale/Kconfig
@@ -145,7 +145,7 @@ config PINCTRL_IMX8MP
 	  Say Y here to enable the imx8mp pinctrl driver
 
 config PINCTRL_IMX8MQ
-	bool "IMX8MQ pinctrl driver"
+	tristate "IMX8MQ pinctrl driver"
 	depends on ARCH_MXC
 	select PINCTRL_IMX
 	help
diff --git a/drivers/pinctrl/freescale/pinctrl-imx8mq.c b/drivers/pinctrl/freescale/pinctrl-imx8mq.c
index 50aa1c0..ae3ea5b 100644
--- a/drivers/pinctrl/freescale/pinctrl-imx8mq.c
+++ b/drivers/pinctrl/freescale/pinctrl-imx8mq.c
@@ -8,6 +8,7 @@
 #include <linux/err.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/pinctrl/pinctrl.h>
@@ -329,6 +330,7 @@ static const struct of_device_id imx8mq_pinctrl_of_match[] = {
 	{ .compatible = "fsl,imx8mq-iomuxc", .data = &imx8mq_pinctrl_info, },
 	{ /* sentinel */ }
 };
+MODULE_DEVICE_TABLE(of, imx8mq_pinctrl_of_match);
 
 static int imx8mq_pinctrl_probe(struct platform_device *pdev)
 {
@@ -350,3 +352,7 @@ static int __init imx8mq_pinctrl_init(void)
 	return platform_driver_register(&imx8mq_pinctrl_driver);
 }
 arch_initcall(imx8mq_pinctrl_init);
+
+MODULE_AUTHOR("Lucas Stach <l.stach@pengutronix.de>");
+MODULE_DESCRIPTION("NXP i.MX8MQ pinctrl driver");
+MODULE_LICENSE("GPL v2");
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH V6 6/9] pinctrl: imx8mp: Support building as module

[Anson Huang]

Change configuration to "tristate", add module device table,
author, description and license to support building i.MX8MP
pinctrl driver as module.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
No change.
---
 drivers/pinctrl/freescale/Kconfig          | 2 +-
 drivers/pinctrl/freescale/pinctrl-imx8mp.c | 6 ++++++
 2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/freescale/Kconfig b/drivers/pinctrl/freescale/Kconfig
index df77e752..2bf90b3 100644
--- a/drivers/pinctrl/freescale/Kconfig
+++ b/drivers/pinctrl/freescale/Kconfig
@@ -138,7 +138,7 @@ config PINCTRL_IMX8MN
 	  Say Y here to enable the imx8mn pinctrl driver
 
 config PINCTRL_IMX8MP
-	bool "IMX8MP pinctrl driver"
+	tristate "IMX8MP pinctrl driver"
 	depends on ARCH_MXC
 	select PINCTRL_IMX
 	help
diff --git a/drivers/pinctrl/freescale/pinctrl-imx8mp.c b/drivers/pinctrl/freescale/pinctrl-imx8mp.c
index e3f644c..bf4bbb5 100644
--- a/drivers/pinctrl/freescale/pinctrl-imx8mp.c
+++ b/drivers/pinctrl/freescale/pinctrl-imx8mp.c
@@ -5,6 +5,7 @@
 
 #include <linux/err.h>
 #include <linux/init.h>
+#include <linux/module.h>
 #include <linux/of.h>
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/platform_device.h>
@@ -324,6 +325,7 @@ static const struct of_device_id imx8mp_pinctrl_of_match[] = {
 	{ .compatible = "fsl,imx8mp-iomuxc", .data = &imx8mp_pinctrl_info, },
 	{ /* sentinel */ }
 };
+MODULE_DEVICE_TABLE(of, imx8mp_pinctrl_of_match);
 
 static int imx8mp_pinctrl_probe(struct platform_device *pdev)
 {
@@ -343,3 +345,7 @@ static int __init imx8mp_pinctrl_init(void)
 	return platform_driver_register(&imx8mp_pinctrl_driver);
 }
 arch_initcall(imx8mp_pinctrl_init);
+
+MODULE_AUTHOR("Anson Huang <Anson.Huang@nxp.com>");
+MODULE_DESCRIPTION("NXP i.MX8MP pinctrl driver");
+MODULE_LICENSE("GPL v2");
-- 
2.7.4

[PATCH V6 6/9] pinctrl: imx8mp: Support building as module

[Anson Huang]

Change configuration to "tristate", add module device table,
author, description and license to support building i.MX8MP
pinctrl driver as module.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
No change.
---
 drivers/pinctrl/freescale/Kconfig          | 2 +-
 drivers/pinctrl/freescale/pinctrl-imx8mp.c | 6 ++++++
 2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/freescale/Kconfig b/drivers/pinctrl/freescale/Kconfig
index df77e752..2bf90b3 100644
--- a/drivers/pinctrl/freescale/Kconfig
+++ b/drivers/pinctrl/freescale/Kconfig
@@ -138,7 +138,7 @@ config PINCTRL_IMX8MN
 	  Say Y here to enable the imx8mn pinctrl driver
 
 config PINCTRL_IMX8MP
-	bool "IMX8MP pinctrl driver"
+	tristate "IMX8MP pinctrl driver"
 	depends on ARCH_MXC
 	select PINCTRL_IMX
 	help
diff --git a/drivers/pinctrl/freescale/pinctrl-imx8mp.c b/drivers/pinctrl/freescale/pinctrl-imx8mp.c
index e3f644c..bf4bbb5 100644
--- a/drivers/pinctrl/freescale/pinctrl-imx8mp.c
+++ b/drivers/pinctrl/freescale/pinctrl-imx8mp.c
@@ -5,6 +5,7 @@
 
 #include <linux/err.h>
 #include <linux/init.h>
+#include <linux/module.h>
 #include <linux/of.h>
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/platform_device.h>
@@ -324,6 +325,7 @@ static const struct of_device_id imx8mp_pinctrl_of_match[] = {
 	{ .compatible = "fsl,imx8mp-iomuxc", .data = &imx8mp_pinctrl_info, },
 	{ /* sentinel */ }
 };
+MODULE_DEVICE_TABLE(of, imx8mp_pinctrl_of_match);
 
 static int imx8mp_pinctrl_probe(struct platform_device *pdev)
 {
@@ -343,3 +345,7 @@ static int __init imx8mp_pinctrl_init(void)
 	return platform_driver_register(&imx8mp_pinctrl_driver);
 }
 arch_initcall(imx8mp_pinctrl_init);
+
+MODULE_AUTHOR("Anson Huang <Anson.Huang@nxp.com>");
+MODULE_DESCRIPTION("NXP i.MX8MP pinctrl driver");
+MODULE_LICENSE("GPL v2");
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH V6 7/9] pinctrl: imx8qxp: Support building as module

[Anson Huang]

Change configuration to "tristate", add module device table,
author, description and license to support building i.MX8QXP
pinctrl driver as module.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
No change.
---
 drivers/pinctrl/freescale/Kconfig           | 2 +-
 drivers/pinctrl/freescale/pinctrl-imx8qxp.c | 5 +++++
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/freescale/Kconfig b/drivers/pinctrl/freescale/Kconfig
index 2bf90b3..0a728bb 100644
--- a/drivers/pinctrl/freescale/Kconfig
+++ b/drivers/pinctrl/freescale/Kconfig
@@ -159,7 +159,7 @@ config PINCTRL_IMX8QM
 	  Say Y here to enable the imx8qm pinctrl driver
 
 config PINCTRL_IMX8QXP
-	bool "IMX8QXP pinctrl driver"
+	tristate "IMX8QXP pinctrl driver"
 	depends on IMX_SCU && ARCH_MXC && ARM64
 	select PINCTRL_IMX_SCU
 	help
diff --git a/drivers/pinctrl/freescale/pinctrl-imx8qxp.c b/drivers/pinctrl/freescale/pinctrl-imx8qxp.c
index 1131dc3..81ebd4c 100644
--- a/drivers/pinctrl/freescale/pinctrl-imx8qxp.c
+++ b/drivers/pinctrl/freescale/pinctrl-imx8qxp.c
@@ -204,6 +204,7 @@ static const struct of_device_id imx8qxp_pinctrl_of_match[] = {
 	{ .compatible = "fsl,imx8qxp-iomuxc", },
 	{ /* sentinel */ }
 };
+MODULE_DEVICE_TABLE(of, imx8qxp_pinctrl_of_match);
 
 static int imx8qxp_pinctrl_probe(struct platform_device *pdev)
 {
@@ -230,3 +231,7 @@ static int __init imx8qxp_pinctrl_init(void)
 	return platform_driver_register(&imx8qxp_pinctrl_driver);
 }
 arch_initcall(imx8qxp_pinctrl_init);
+
+MODULE_AUTHOR("Aisheng Dong <aisheng.dong@nxp.com>");
+MODULE_DESCRIPTION("NXP i.MX8QXP pinctrl driver");
+MODULE_LICENSE("GPL v2");
-- 
2.7.4

[PATCH V6 7/9] pinctrl: imx8qxp: Support building as module

[Anson Huang]

Change configuration to "tristate", add module device table,
author, description and license to support building i.MX8QXP
pinctrl driver as module.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
No change.
---
 drivers/pinctrl/freescale/Kconfig           | 2 +-
 drivers/pinctrl/freescale/pinctrl-imx8qxp.c | 5 +++++
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/freescale/Kconfig b/drivers/pinctrl/freescale/Kconfig
index 2bf90b3..0a728bb 100644
--- a/drivers/pinctrl/freescale/Kconfig
+++ b/drivers/pinctrl/freescale/Kconfig
@@ -159,7 +159,7 @@ config PINCTRL_IMX8QM
 	  Say Y here to enable the imx8qm pinctrl driver
 
 config PINCTRL_IMX8QXP
-	bool "IMX8QXP pinctrl driver"
+	tristate "IMX8QXP pinctrl driver"
 	depends on IMX_SCU && ARCH_MXC && ARM64
 	select PINCTRL_IMX_SCU
 	help
diff --git a/drivers/pinctrl/freescale/pinctrl-imx8qxp.c b/drivers/pinctrl/freescale/pinctrl-imx8qxp.c
index 1131dc3..81ebd4c 100644
--- a/drivers/pinctrl/freescale/pinctrl-imx8qxp.c
+++ b/drivers/pinctrl/freescale/pinctrl-imx8qxp.c
@@ -204,6 +204,7 @@ static const struct of_device_id imx8qxp_pinctrl_of_match[] = {
 	{ .compatible = "fsl,imx8qxp-iomuxc", },
 	{ /* sentinel */ }
 };
+MODULE_DEVICE_TABLE(of, imx8qxp_pinctrl_of_match);
 
 static int imx8qxp_pinctrl_probe(struct platform_device *pdev)
 {
@@ -230,3 +231,7 @@ static int __init imx8qxp_pinctrl_init(void)
 	return platform_driver_register(&imx8qxp_pinctrl_driver);
 }
 arch_initcall(imx8qxp_pinctrl_init);
+
+MODULE_AUTHOR("Aisheng Dong <aisheng.dong@nxp.com>");
+MODULE_DESCRIPTION("NXP i.MX8QXP pinctrl driver");
+MODULE_LICENSE("GPL v2");
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH V6 8/9] pinctrl: imx8qm: Support building as module

[Anson Huang]

Change configuration to "tristate", add module device table,
author, description and license to support building i.MX8QM
pinctrl driver as module.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
No change.
---
 drivers/pinctrl/freescale/Kconfig          | 2 +-
 drivers/pinctrl/freescale/pinctrl-imx8qm.c | 5 +++++
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/freescale/Kconfig b/drivers/pinctrl/freescale/Kconfig
index 0a728bb..d9fb5f2 100644
--- a/drivers/pinctrl/freescale/Kconfig
+++ b/drivers/pinctrl/freescale/Kconfig
@@ -152,7 +152,7 @@ config PINCTRL_IMX8MQ
 	  Say Y here to enable the imx8mq pinctrl driver
 
 config PINCTRL_IMX8QM
-	bool "IMX8QM pinctrl driver"
+	tristate "IMX8QM pinctrl driver"
 	depends on IMX_SCU && ARCH_MXC && ARM64
 	select PINCTRL_IMX_SCU
 	help
diff --git a/drivers/pinctrl/freescale/pinctrl-imx8qm.c b/drivers/pinctrl/freescale/pinctrl-imx8qm.c
index 0b6029b..095acf4 100644
--- a/drivers/pinctrl/freescale/pinctrl-imx8qm.c
+++ b/drivers/pinctrl/freescale/pinctrl-imx8qm.c
@@ -298,6 +298,7 @@ static const struct of_device_id imx8qm_pinctrl_of_match[] = {
 	{ .compatible = "fsl,imx8qm-iomuxc", },
 	{ /* sentinel */ }
 };
+MODULE_DEVICE_TABLE(of, imx8qm_pinctrl_of_match);
 
 static int imx8qm_pinctrl_probe(struct platform_device *pdev)
 {
@@ -324,3 +325,7 @@ static int __init imx8qm_pinctrl_init(void)
 	return platform_driver_register(&imx8qm_pinctrl_driver);
 }
 arch_initcall(imx8qm_pinctrl_init);
+
+MODULE_AUTHOR("Aisheng Dong <aisheng.dong@nxp.com>");
+MODULE_DESCRIPTION("NXP i.MX8QM pinctrl driver");
+MODULE_LICENSE("GPL v2");
-- 
2.7.4

[PATCH V6 8/9] pinctrl: imx8qm: Support building as module

[Anson Huang]

Change configuration to "tristate", add module device table,
author, description and license to support building i.MX8QM
pinctrl driver as module.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
No change.
---
 drivers/pinctrl/freescale/Kconfig          | 2 +-
 drivers/pinctrl/freescale/pinctrl-imx8qm.c | 5 +++++
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/freescale/Kconfig b/drivers/pinctrl/freescale/Kconfig
index 0a728bb..d9fb5f2 100644
--- a/drivers/pinctrl/freescale/Kconfig
+++ b/drivers/pinctrl/freescale/Kconfig
@@ -152,7 +152,7 @@ config PINCTRL_IMX8MQ
 	  Say Y here to enable the imx8mq pinctrl driver
 
 config PINCTRL_IMX8QM
-	bool "IMX8QM pinctrl driver"
+	tristate "IMX8QM pinctrl driver"
 	depends on IMX_SCU && ARCH_MXC && ARM64
 	select PINCTRL_IMX_SCU
 	help
diff --git a/drivers/pinctrl/freescale/pinctrl-imx8qm.c b/drivers/pinctrl/freescale/pinctrl-imx8qm.c
index 0b6029b..095acf4 100644
--- a/drivers/pinctrl/freescale/pinctrl-imx8qm.c
+++ b/drivers/pinctrl/freescale/pinctrl-imx8qm.c
@@ -298,6 +298,7 @@ static const struct of_device_id imx8qm_pinctrl_of_match[] = {
 	{ .compatible = "fsl,imx8qm-iomuxc", },
 	{ /* sentinel */ }
 };
+MODULE_DEVICE_TABLE(of, imx8qm_pinctrl_of_match);
 
 static int imx8qm_pinctrl_probe(struct platform_device *pdev)
 {
@@ -324,3 +325,7 @@ static int __init imx8qm_pinctrl_init(void)
 	return platform_driver_register(&imx8qm_pinctrl_driver);
 }
 arch_initcall(imx8qm_pinctrl_init);
+
+MODULE_AUTHOR("Aisheng Dong <aisheng.dong@nxp.com>");
+MODULE_DESCRIPTION("NXP i.MX8QM pinctrl driver");
+MODULE_LICENSE("GPL v2");
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH V6 9/9] pinctrl: imx8dxl: Support building as module

[Anson Huang]

Change configuration to "tristate", add module device table,
author, description and license to support building i.MX8DXL
pinctrl driver as module.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
No change.
---
 drivers/pinctrl/freescale/Kconfig           | 2 +-
 drivers/pinctrl/freescale/pinctrl-imx8dxl.c | 5 +++++
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/freescale/Kconfig b/drivers/pinctrl/freescale/Kconfig
index d9fb5f2..08fcf5c 100644
--- a/drivers/pinctrl/freescale/Kconfig
+++ b/drivers/pinctrl/freescale/Kconfig
@@ -166,7 +166,7 @@ config PINCTRL_IMX8QXP
 	  Say Y here to enable the imx8qxp pinctrl driver
 
 config PINCTRL_IMX8DXL
-	bool "IMX8DXL pinctrl driver"
+	tristate "IMX8DXL pinctrl driver"
 	depends on IMX_SCU && ARCH_MXC && ARM64
 	select PINCTRL_IMX_SCU
 	help
diff --git a/drivers/pinctrl/freescale/pinctrl-imx8dxl.c b/drivers/pinctrl/freescale/pinctrl-imx8dxl.c
index 7f32e57..12b97da 100644
--- a/drivers/pinctrl/freescale/pinctrl-imx8dxl.c
+++ b/drivers/pinctrl/freescale/pinctrl-imx8dxl.c
@@ -165,6 +165,7 @@ static const struct of_device_id imx8dxl_pinctrl_of_match[] = {
 	{ .compatible = "fsl,imx8dxl-iomuxc", },
 	{ /* sentinel */ }
 };
+MODULE_DEVICE_TABLE(of, imx8dxl_pinctrl_of_match);
 
 static int imx8dxl_pinctrl_probe(struct platform_device *pdev)
 {
@@ -191,3 +192,7 @@ static int __init imx8dxl_pinctrl_init(void)
 	return platform_driver_register(&imx8dxl_pinctrl_driver);
 }
 arch_initcall(imx8dxl_pinctrl_init);
+
+MODULE_AUTHOR("Anson Huang <Anson.Huang@nxp.com>");
+MODULE_DESCRIPTION("NXP i.MX8DXL pinctrl driver");
+MODULE_LICENSE("GPL v2");
-- 
2.7.4

[PATCH V6 9/9] pinctrl: imx8dxl: Support building as module

[Anson Huang]

Change configuration to "tristate", add module device table,
author, description and license to support building i.MX8DXL
pinctrl driver as module.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
No change.
---
 drivers/pinctrl/freescale/Kconfig           | 2 +-
 drivers/pinctrl/freescale/pinctrl-imx8dxl.c | 5 +++++
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/freescale/Kconfig b/drivers/pinctrl/freescale/Kconfig
index d9fb5f2..08fcf5c 100644
--- a/drivers/pinctrl/freescale/Kconfig
+++ b/drivers/pinctrl/freescale/Kconfig
@@ -166,7 +166,7 @@ config PINCTRL_IMX8QXP
 	  Say Y here to enable the imx8qxp pinctrl driver
 
 config PINCTRL_IMX8DXL
-	bool "IMX8DXL pinctrl driver"
+	tristate "IMX8DXL pinctrl driver"
 	depends on IMX_SCU && ARCH_MXC && ARM64
 	select PINCTRL_IMX_SCU
 	help
diff --git a/drivers/pinctrl/freescale/pinctrl-imx8dxl.c b/drivers/pinctrl/freescale/pinctrl-imx8dxl.c
index 7f32e57..12b97da 100644
--- a/drivers/pinctrl/freescale/pinctrl-imx8dxl.c
+++ b/drivers/pinctrl/freescale/pinctrl-imx8dxl.c
@@ -165,6 +165,7 @@ static const struct of_device_id imx8dxl_pinctrl_of_match[] = {
 	{ .compatible = "fsl,imx8dxl-iomuxc", },
 	{ /* sentinel */ }
 };
+MODULE_DEVICE_TABLE(of, imx8dxl_pinctrl_of_match);
 
 static int imx8dxl_pinctrl_probe(struct platform_device *pdev)
 {
@@ -191,3 +192,7 @@ static int __init imx8dxl_pinctrl_init(void)
 	return platform_driver_register(&imx8dxl_pinctrl_driver);
 }
 arch_initcall(imx8dxl_pinctrl_init);
+
+MODULE_AUTHOR("Anson Huang <Anson.Huang@nxp.com>");
+MODULE_DESCRIPTION("NXP i.MX8DXL pinctrl driver");
+MODULE_LICENSE("GPL v2");
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

RE: [PATCH V6 0/9] Support i.MX8 SoCs pinctrl drivers built as module

[Aisheng Dong]

> From: Anson Huang <Anson.Huang@nxp.com>
> Sent: Wednesday, June 24, 2020 2:24 PM
> 
> There are more and mroe requirements that SoC specific modules should be
> built as module in order to support generic kernel image, such as Android GKI
> concept.
> 
> This patch series supports i.MX8 SoCs pinctrl drivers to be built as module,
> including i.MX8MQ/MM/MN/MP/QXP/QM/DXL SoCs, i.MX common pinctrl
> driver and i.MX SCU common pinctrl driver as still built-in.
> 
> Compared to V5, the changes are as below:
>         - Keep i.MX common pinctrl libary built in, ONLY i.MX SoC pinctrl
> driver
>           support built as module.
> 
> Anson Huang (9):
>   pinctrl: imx: Support i.MX8 SoCs pinctrl driver built as module
>   pinctrl: imx: scu: Support i.MX8 SCU SoCs pinctrl driver built as
>     module
>   pinctrl: imx8mm: Support building as module
>   pinctrl: imx8mn: Support building as module
>   pinctrl: imx8mq: Support building as module
>   pinctrl: imx8mp: Support building as module
>   pinctrl: imx8qxp: Support building as module
>   pinctrl: imx8qm: Support building as module
>   pinctrl: imx8dxl: Support building as module

For this patch series:
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>

Regards
Aisheng

RE: [PATCH V6 0/9] Support i.MX8 SoCs pinctrl drivers built as module

[Aisheng Dong]

> From: Anson Huang <Anson.Huang@nxp.com>
> Sent: Wednesday, June 24, 2020 2:24 PM
> 
> There are more and mroe requirements that SoC specific modules should be
> built as module in order to support generic kernel image, such as Android GKI
> concept.
> 
> This patch series supports i.MX8 SoCs pinctrl drivers to be built as module,
> including i.MX8MQ/MM/MN/MP/QXP/QM/DXL SoCs, i.MX common pinctrl
> driver and i.MX SCU common pinctrl driver as still built-in.
> 
> Compared to V5, the changes are as below:
>         - Keep i.MX common pinctrl libary built in, ONLY i.MX SoC pinctrl
> driver
>           support built as module.
> 
> Anson Huang (9):
>   pinctrl: imx: Support i.MX8 SoCs pinctrl driver built as module
>   pinctrl: imx: scu: Support i.MX8 SCU SoCs pinctrl driver built as
>     module
>   pinctrl: imx8mm: Support building as module
>   pinctrl: imx8mn: Support building as module
>   pinctrl: imx8mq: Support building as module
>   pinctrl: imx8mp: Support building as module
>   pinctrl: imx8qxp: Support building as module
>   pinctrl: imx8qm: Support building as module
>   pinctrl: imx8dxl: Support building as module

For this patch series:
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>

Regards
Aisheng
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH V6 0/9] Support i.MX8 SoCs pinctrl drivers built as module

[Linus Walleij]

On Wed, Jun 24, 2020 at 8:35 AM Anson Huang <Anson.Huang@nxp.com> wrote:

> There are more and mroe requirements that SoC specific modules should be built
> as module in order to support generic kernel image, such as Android GKI concept.
>
> This patch series supports i.MX8 SoCs pinctrl drivers to be built as module,
> including i.MX8MQ/MM/MN/MP/QXP/QM/DXL SoCs, i.MX common pinctrl driver and i.MX
> SCU common pinctrl driver as still built-in.
>
> Compared to V5, the changes are as below:
>         - Keep i.MX common pinctrl libary built in, ONLY i.MX SoC pinctrl driver
>           support built as module.
>
> Anson Huang (9):
>   pinctrl: imx: Support i.MX8 SoCs pinctrl driver built as module
>   pinctrl: imx: scu: Support i.MX8 SCU SoCs pinctrl driver built as
>     module
>   pinctrl: imx8mm: Support building as module
>   pinctrl: imx8mn: Support building as module
>   pinctrl: imx8mq: Support building as module
>   pinctrl: imx8mp: Support building as module
>   pinctrl: imx8qxp: Support building as module
>   pinctrl: imx8qm: Support building as module
>   pinctrl: imx8dxl: Support building as module

Patches applied to the pinctrl devel branch for v5.9.

Yours,
Linus Walleij

Re: [PATCH V6 0/9] Support i.MX8 SoCs pinctrl drivers built as module

[Linus Walleij]

On Wed, Jun 24, 2020 at 8:35 AM Anson Huang <Anson.Huang@nxp.com> wrote:

> There are more and mroe requirements that SoC specific modules should be built
> as module in order to support generic kernel image, such as Android GKI concept.
>
> This patch series supports i.MX8 SoCs pinctrl drivers to be built as module,
> including i.MX8MQ/MM/MN/MP/QXP/QM/DXL SoCs, i.MX common pinctrl driver and i.MX
> SCU common pinctrl driver as still built-in.
>
> Compared to V5, the changes are as below:
>         - Keep i.MX common pinctrl libary built in, ONLY i.MX SoC pinctrl driver
>           support built as module.
>
> Anson Huang (9):
>   pinctrl: imx: Support i.MX8 SoCs pinctrl driver built as module
>   pinctrl: imx: scu: Support i.MX8 SCU SoCs pinctrl driver built as
>     module
>   pinctrl: imx8mm: Support building as module
>   pinctrl: imx8mn: Support building as module
>   pinctrl: imx8mq: Support building as module
>   pinctrl: imx8mp: Support building as module
>   pinctrl: imx8qxp: Support building as module
>   pinctrl: imx8qm: Support building as module
>   pinctrl: imx8dxl: Support building as module

Patches applied to the pinctrl devel branch for v5.9.

Yours,
Linus Walleij

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel