From: Li Jun <jun.li@nxp.com> To: balbi@kernel.org, shawnguo@kernel.org, robh+dt@kernel.org Cc: gregkh@linuxfoundation.org, s.hauer@pengutronix.de, kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com, linux-usb@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, peter.chen@nxp.com, Anson.Huang@nxp.com, peng.fan@nxp.com, horia.geanta@nxp.com Subject: [PATCH v2 4/5] arm64: dts: imx8mp-evk: enable usb1 as host mode Date: Mon, 6 Jul 2020 17:44:58 +0800 [thread overview] Message-ID: <1594028699-1055-5-git-send-email-jun.li@nxp.com> (raw) In-Reply-To: <1594028699-1055-1-git-send-email-jun.li@nxp.com> Enable usb host port with type-A connector on imx8mp-evk board. Signed-off-by: Li Jun <jun.li@nxp.com> --- arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts index 3da1fff..c7cacf2 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts @@ -91,6 +91,21 @@ status = "okay"; }; +&usb3_phy1 { + status = "okay"; +}; + +&usb3_1 { + status = "okay"; +}; + +&usb_dwc3_1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1_vbus>; + dr_mode = "host"; + status = "okay"; +}; + &usdhc2 { assigned-clocks = <&clk IMX8MP_CLK_USDHC2>; assigned-clock-rates = <400000000>; @@ -172,6 +187,12 @@ >; }; + pinctrl_usb1_vbus: usb1grp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO14__HSIOMIX_usb2_OTG_PWR 0x19 + >; + }; + pinctrl_usdhc2: usdhc2grp { fsl,pins = < MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190 -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Li Jun <jun.li@nxp.com> To: balbi@kernel.org, shawnguo@kernel.org, robh+dt@kernel.org Cc: devicetree@vger.kernel.org, peng.fan@nxp.com, horia.geanta@nxp.com, Anson.Huang@nxp.com, peter.chen@nxp.com, gregkh@linuxfoundation.org, s.hauer@pengutronix.de, linux-usb@vger.kernel.org, linux-imx@nxp.com, kernel@pengutronix.de, festevam@gmail.com, linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 4/5] arm64: dts: imx8mp-evk: enable usb1 as host mode Date: Mon, 6 Jul 2020 17:44:58 +0800 [thread overview] Message-ID: <1594028699-1055-5-git-send-email-jun.li@nxp.com> (raw) In-Reply-To: <1594028699-1055-1-git-send-email-jun.li@nxp.com> Enable usb host port with type-A connector on imx8mp-evk board. Signed-off-by: Li Jun <jun.li@nxp.com> --- arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts index 3da1fff..c7cacf2 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts @@ -91,6 +91,21 @@ status = "okay"; }; +&usb3_phy1 { + status = "okay"; +}; + +&usb3_1 { + status = "okay"; +}; + +&usb_dwc3_1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1_vbus>; + dr_mode = "host"; + status = "okay"; +}; + &usdhc2 { assigned-clocks = <&clk IMX8MP_CLK_USDHC2>; assigned-clock-rates = <400000000>; @@ -172,6 +187,12 @@ >; }; + pinctrl_usb1_vbus: usb1grp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO14__HSIOMIX_usb2_OTG_PWR 0x19 + >; + }; + pinctrl_usdhc2: usdhc2grp { fsl,pins = < MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190 -- 2.7.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-07-06 9:48 UTC|newest] Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-07-06 9:44 [PATCH v2 0/5] add NXP imx8mp usb support Li Jun 2020-07-06 9:44 ` Li Jun 2020-07-06 9:44 ` [PATCH v2 1/5] usb: dwc3: add platform data to dwc3 core device to pass data Li Jun 2020-07-06 9:44 ` Li Jun 2020-07-22 14:33 ` Jun Li 2020-07-22 14:33 ` Jun Li 2020-07-23 9:22 ` Felipe Balbi 2020-07-23 9:22 ` Felipe Balbi 2020-07-23 9:58 ` Jun Li 2020-07-23 9:58 ` Jun Li 2020-08-13 9:54 ` Jun Li 2020-08-13 9:54 ` Jun Li 2020-07-06 9:44 ` [PATCH v2 2/5] usb: dwc3: add imx8mp dwc3 glue layer driver Li Jun 2020-07-06 9:44 ` Li Jun 2020-07-06 9:44 ` [PATCH v2 3/5] arm64: dtsi: imx8mp: add usb nodes Li Jun 2020-07-06 9:44 ` Li Jun 2020-07-06 9:44 ` Li Jun [this message] 2020-07-06 9:44 ` [PATCH v2 4/5] arm64: dts: imx8mp-evk: enable usb1 as host mode Li Jun 2020-07-06 9:44 ` [PATCH v2 5/5] dt-bindings: usb: dwc3-imx8mp: add imx8mp dwc3 glue bindings Li Jun 2020-07-06 9:44 ` Li Jun 2020-07-14 3:00 ` Rob Herring 2020-07-14 3:00 ` Rob Herring
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1594028699-1055-5-git-send-email-jun.li@nxp.com \ --to=jun.li@nxp.com \ --cc=Anson.Huang@nxp.com \ --cc=balbi@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=gregkh@linuxfoundation.org \ --cc=horia.geanta@nxp.com \ --cc=kernel@pengutronix.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=linux-usb@vger.kernel.org \ --cc=peng.fan@nxp.com \ --cc=peter.chen@nxp.com \ --cc=robh+dt@kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.