From: Rajendra Nayak <rnayak@codeaurora.org> To: robdclark@gmail.com, sean@poorly.run, agross@kernel.org, bjorn.andersson@linaro.org Cc: dri-devel@lists.freedesktop.org, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, mka@chromium.org, Rajendra Nayak <rnayak@codeaurora.org> Subject: [PATCH v3 2/4] drm/msm: dsi: Use OPP API to set clk/perf state Date: Thu, 9 Jul 2020 16:34:32 +0530 [thread overview] Message-ID: <1594292674-15632-3-git-send-email-rnayak@codeaurora.org> (raw) In-Reply-To: <1594292674-15632-1-git-send-email-rnayak@codeaurora.org> On SDM845 and SC7180 DSI needs to express a performance state requirement on a power domain depending on the clock rates. Use OPP table from DT to register with OPP framework and use dev_pm_opp_set_rate() to set the clk/perf state. dev_pm_opp_set_rate() is designed to be equivalent to clk_set_rate() for devices without an OPP table, hence the change works fine on devices/platforms which only need to set a clock rate. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> --- drivers/gpu/drm/msm/dsi/dsi_host.c | 27 +++++++++++++++++++++++++-- 1 file changed, 25 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c index 11ae5b8..0a14c4a 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_host.c +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c @@ -14,6 +14,7 @@ #include <linux/of_graph.h> #include <linux/of_irq.h> #include <linux/pinctrl/consumer.h> +#include <linux/pm_opp.h> #include <linux/regmap.h> #include <linux/regulator/consumer.h> #include <linux/spinlock.h> @@ -111,6 +112,9 @@ struct msm_dsi_host { struct clk *pixel_clk_src; struct clk *byte_intf_clk; + struct opp_table *opp_table; + bool has_opp_table; + u32 byte_clk_rate; u32 pixel_clk_rate; u32 esc_clk_rate; @@ -512,9 +516,10 @@ int dsi_link_clk_set_rate_6g(struct msm_dsi_host *msm_host) DBG("Set clk rates: pclk=%d, byteclk=%d", msm_host->mode->clock, msm_host->byte_clk_rate); - ret = clk_set_rate(msm_host->byte_clk, msm_host->byte_clk_rate); + ret = dev_pm_opp_set_rate(&msm_host->pdev->dev, + msm_host->byte_clk_rate); if (ret) { - pr_err("%s: Failed to set rate byte clk, %d\n", __func__, ret); + pr_err("%s: dev_pm_opp_set_rate failed %d\n", __func__, ret); return ret; } @@ -658,6 +663,8 @@ int dsi_link_clk_enable_v2(struct msm_dsi_host *msm_host) void dsi_link_clk_disable_6g(struct msm_dsi_host *msm_host) { + /* Drop the performance state vote */ + dev_pm_opp_set_rate(&msm_host->pdev->dev, 0); clk_disable_unprepare(msm_host->esc_clk); clk_disable_unprepare(msm_host->pixel_clk); if (msm_host->byte_intf_clk) @@ -1879,6 +1886,19 @@ int msm_dsi_host_init(struct msm_dsi *msm_dsi) goto fail; } + msm_host->opp_table = dev_pm_opp_set_clkname(&pdev->dev, "byte"); + if (IS_ERR(msm_host->opp_table)) + return PTR_ERR(msm_host->opp_table); + /* OPP table is optional */ + ret = dev_pm_opp_of_add_table(&pdev->dev); + if (!ret) { + msm_host->has_opp_table = true; + } else if (ret != -ENODEV) { + dev_err(&pdev->dev, "invalid OPP table in device tree\n"); + dev_pm_opp_put_clkname(msm_host->opp_table); + return ret; + } + init_completion(&msm_host->dma_comp); init_completion(&msm_host->video_comp); mutex_init(&msm_host->dev_mutex); @@ -1914,6 +1934,9 @@ void msm_dsi_host_destroy(struct mipi_dsi_host *host) mutex_destroy(&msm_host->cmd_mutex); mutex_destroy(&msm_host->dev_mutex); + if (msm_host->has_opp_table) + dev_pm_opp_of_remove_table(&msm_host->pdev->dev); + dev_pm_opp_put_clkname(msm_host->opp_table); pm_runtime_disable(&msm_host->pdev->dev); } -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
WARNING: multiple messages have this Message-ID (diff)
From: Rajendra Nayak <rnayak@codeaurora.org> To: robdclark@gmail.com, sean@poorly.run, agross@kernel.org, bjorn.andersson@linaro.org Cc: devicetree@vger.kernel.org, Rajendra Nayak <rnayak@codeaurora.org>, linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org, mka@chromium.org Subject: [PATCH v3 2/4] drm/msm: dsi: Use OPP API to set clk/perf state Date: Thu, 9 Jul 2020 16:34:32 +0530 [thread overview] Message-ID: <1594292674-15632-3-git-send-email-rnayak@codeaurora.org> (raw) In-Reply-To: <1594292674-15632-1-git-send-email-rnayak@codeaurora.org> On SDM845 and SC7180 DSI needs to express a performance state requirement on a power domain depending on the clock rates. Use OPP table from DT to register with OPP framework and use dev_pm_opp_set_rate() to set the clk/perf state. dev_pm_opp_set_rate() is designed to be equivalent to clk_set_rate() for devices without an OPP table, hence the change works fine on devices/platforms which only need to set a clock rate. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> --- drivers/gpu/drm/msm/dsi/dsi_host.c | 27 +++++++++++++++++++++++++-- 1 file changed, 25 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c index 11ae5b8..0a14c4a 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_host.c +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c @@ -14,6 +14,7 @@ #include <linux/of_graph.h> #include <linux/of_irq.h> #include <linux/pinctrl/consumer.h> +#include <linux/pm_opp.h> #include <linux/regmap.h> #include <linux/regulator/consumer.h> #include <linux/spinlock.h> @@ -111,6 +112,9 @@ struct msm_dsi_host { struct clk *pixel_clk_src; struct clk *byte_intf_clk; + struct opp_table *opp_table; + bool has_opp_table; + u32 byte_clk_rate; u32 pixel_clk_rate; u32 esc_clk_rate; @@ -512,9 +516,10 @@ int dsi_link_clk_set_rate_6g(struct msm_dsi_host *msm_host) DBG("Set clk rates: pclk=%d, byteclk=%d", msm_host->mode->clock, msm_host->byte_clk_rate); - ret = clk_set_rate(msm_host->byte_clk, msm_host->byte_clk_rate); + ret = dev_pm_opp_set_rate(&msm_host->pdev->dev, + msm_host->byte_clk_rate); if (ret) { - pr_err("%s: Failed to set rate byte clk, %d\n", __func__, ret); + pr_err("%s: dev_pm_opp_set_rate failed %d\n", __func__, ret); return ret; } @@ -658,6 +663,8 @@ int dsi_link_clk_enable_v2(struct msm_dsi_host *msm_host) void dsi_link_clk_disable_6g(struct msm_dsi_host *msm_host) { + /* Drop the performance state vote */ + dev_pm_opp_set_rate(&msm_host->pdev->dev, 0); clk_disable_unprepare(msm_host->esc_clk); clk_disable_unprepare(msm_host->pixel_clk); if (msm_host->byte_intf_clk) @@ -1879,6 +1886,19 @@ int msm_dsi_host_init(struct msm_dsi *msm_dsi) goto fail; } + msm_host->opp_table = dev_pm_opp_set_clkname(&pdev->dev, "byte"); + if (IS_ERR(msm_host->opp_table)) + return PTR_ERR(msm_host->opp_table); + /* OPP table is optional */ + ret = dev_pm_opp_of_add_table(&pdev->dev); + if (!ret) { + msm_host->has_opp_table = true; + } else if (ret != -ENODEV) { + dev_err(&pdev->dev, "invalid OPP table in device tree\n"); + dev_pm_opp_put_clkname(msm_host->opp_table); + return ret; + } + init_completion(&msm_host->dma_comp); init_completion(&msm_host->video_comp); mutex_init(&msm_host->dev_mutex); @@ -1914,6 +1934,9 @@ void msm_dsi_host_destroy(struct mipi_dsi_host *host) mutex_destroy(&msm_host->cmd_mutex); mutex_destroy(&msm_host->dev_mutex); + if (msm_host->has_opp_table) + dev_pm_opp_of_remove_table(&msm_host->pdev->dev); + dev_pm_opp_put_clkname(msm_host->opp_table); pm_runtime_disable(&msm_host->pdev->dev); } -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2020-07-09 11:05 UTC|newest] Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-07-09 11:04 [PATCH v3 0/4] DVFS support for dpu and dsi Rajendra Nayak 2020-07-09 11:04 ` Rajendra Nayak 2020-07-09 11:04 ` [PATCH v3 1/4] drm/msm/dpu: Use OPP API to set clk/perf state Rajendra Nayak 2020-07-09 11:04 ` Rajendra Nayak 2020-07-09 11:04 ` Rajendra Nayak [this message] 2020-07-09 11:04 ` [PATCH v3 2/4] drm/msm: dsi: " Rajendra Nayak 2020-07-09 11:04 ` [PATCH v3 3/4] arm64: dts: sdm845: Add DSI and MDP OPP tables and power-domains Rajendra Nayak 2020-07-09 11:04 ` Rajendra Nayak 2020-07-17 17:47 ` Rob Clark 2020-07-17 17:47 ` Rob Clark 2020-07-09 11:04 ` [PATCH v3 4/4] arm64: dts: sc7180: " Rajendra Nayak 2020-07-09 11:04 ` Rajendra Nayak
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1594292674-15632-3-git-send-email-rnayak@codeaurora.org \ --to=rnayak@codeaurora.org \ --cc=agross@kernel.org \ --cc=bjorn.andersson@linaro.org \ --cc=devicetree@vger.kernel.org \ --cc=dri-devel@lists.freedesktop.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=mka@chromium.org \ --cc=robdclark@gmail.com \ --cc=sean@poorly.run \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.