[dpdk-dev] [PATCH v3 0/7] add eCPRI support in mlx5 driver

[Bing Zhao <bingz@mellanox.com>]

This patch set is to add the eCPRI support of flow rules in mlx5 PMD
driver. Right now, only eCPRI over Ethernet layer (including VLAN)
is supported. eCPRI over UDP will be supported in the future. If the
flow rule to be inserted is not supported, PMD driver will return
error to indicate the reason of the failure.

v2: listed as below
    1. added document updates
    2. add NIC / FW capacity check
    3. fix mask of type in common header check and code cleanup
v3: fix the wrong member name in the private structure

Bing Zhao (7):
  net/mlx5: add flow validation of eCPRI header
  net/mlx5: add flow translation of eCPRI header
  common/mlx5: add flex parser DevX structures
  common/mlx5: adding DevX command for flex parsers
  net/mlx5: create and destroy eCPRI flex parser
  net/mlx5: add eCPRI flex parser capacity check
  doc: update release notes and guides for eCPRI

 doc/guides/nics/mlx5.rst                        |   5 +
 doc/guides/rel_notes/release_20_08.rst          |   1 +
 drivers/common/mlx5/mlx5_devx_cmds.c            | 170 +++++++++++++++++++++++-
 drivers/common/mlx5/mlx5_devx_cmds.h            |  52 ++++++++
 drivers/common/mlx5/mlx5_prm.h                  | 115 +++++++++++++++-
 drivers/common/mlx5/rte_common_mlx5_version.map |   2 +
 drivers/net/mlx5/mlx5.c                         | 107 +++++++++++++++
 drivers/net/mlx5/mlx5.h                         |  19 +++
 drivers/net/mlx5/mlx5_flow.c                    | 107 ++++++++++++++-
 drivers/net/mlx5/mlx5_flow.h                    |   9 ++
 drivers/net/mlx5/mlx5_flow_dv.c                 | 126 ++++++++++++++++++
 11 files changed, 704 insertions(+), 9 deletions(-)

-- 
2.5.5