All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bing Zhao <bingz@mellanox.com>
To: orika@mellanox.com, viacheslavo@mellanox.com
Cc: rasland@mellanox.com, matan@mellanox.com, dev@dpdk.org,
	netanelg@mellanox.com
Subject: [dpdk-dev] [PATCH v4 7/7] doc: update release notes and guides for eCPRI
Date: Fri, 17 Jul 2020 15:11:51 +0800	[thread overview]
Message-ID: <1594969911-105341-8-git-send-email-bingz@mellanox.com> (raw)
In-Reply-To: <1594969911-105341-1-git-send-email-bingz@mellanox.com>

Update the release notes of mlx5 PMD part by adding the
support of eCPRI.
Update the firmware configuration in the mlx5 NIC guide to support
the usage of eCPRI.

Signed-off-by: Bing Zhao <bingz@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
---
 doc/guides/nics/mlx5.rst               | 5 +++++
 doc/guides/rel_notes/release_20_08.rst | 1 +
 2 files changed, 6 insertions(+)

diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst
index 9a57768..c185129 100644
--- a/doc/guides/nics/mlx5.rst
+++ b/doc/guides/nics/mlx5.rst
@@ -993,6 +993,11 @@ Below are some firmware configurations listed.
 
    FLEX_PARSER_PROFILE_ENABLE=3
 
+- enable eCPRI flow matching::
+
+   FLEX_PARSER_PROFILE_ENABLE=4
+   PROG_PARSE_GRAPH=1
+
 Prerequisites
 -------------
 
diff --git a/doc/guides/rel_notes/release_20_08.rst b/doc/guides/rel_notes/release_20_08.rst
index f19b748..6f44ffd 100644
--- a/doc/guides/rel_notes/release_20_08.rst
+++ b/doc/guides/rel_notes/release_20_08.rst
@@ -122,6 +122,7 @@ New Features
 
   * Added new PMD devarg ``reclaim_mem_mode``.
   * Added new devarg ``lacp_by_user``.
+  * Added support for eCPRI protocol offloading.
 
 * **Added vDPA device APIs to query virtio queue statistics.**
 
-- 
1.8.3.1


  parent reply	other threads:[~2020-07-17  7:13 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-08 14:43 [dpdk-dev] [PATCH 0/5] add eCPRI support in mlx5 driver Bing Zhao
2020-07-08 14:43 ` [dpdk-dev] [PATCH 1/5] net/mlx5: add flow validation of eCPRI header Bing Zhao
2020-07-08 14:43 ` [dpdk-dev] [PATCH 2/5] net/mlx5: add flow translation " Bing Zhao
2020-07-09 12:22   ` Thomas Monjalon
2020-07-09 14:47     ` Bing Zhao
2020-07-08 14:43 ` [dpdk-dev] [PATCH 3/5] net/mlx5: add flex parser devx structures Bing Zhao
2020-07-08 14:43 ` [dpdk-dev] [PATCH 4/5] net/mlx5: adding Devx command for flex parsers Bing Zhao
2020-07-08 14:43 ` [dpdk-dev] [PATCH 5/5] net/mlx5: create and destroy eCPRI flex parser Bing Zhao
2020-07-16 13:49 ` [dpdk-dev] [PATCH v2 0/7] add eCPRI support in mlx5 driver Bing Zhao
2020-07-16 13:49   ` [dpdk-dev] [PATCH v2 1/7] net/mlx5: add flow validation of eCPRI header Bing Zhao
2020-07-16 13:49   ` [dpdk-dev] [PATCH v2 2/7] net/mlx5: add flow translation " Bing Zhao
2020-07-16 13:49   ` [dpdk-dev] [PATCH v2 3/7] common/mlx5: add flex parser DevX structures Bing Zhao
2020-07-16 13:49   ` [dpdk-dev] [PATCH v2 4/7] common/mlx5: adding DevX command for flex parsers Bing Zhao
2020-07-16 13:49   ` [dpdk-dev] [PATCH v2 5/7] net/mlx5: create and destroy eCPRI flex parser Bing Zhao
2020-07-16 13:49   ` [dpdk-dev] [PATCH v2 6/7] net/mlx5: add eCPRI flex parser capacity check Bing Zhao
2020-07-16 13:49   ` [dpdk-dev] [PATCH v2 7/7] doc: update release notes and guides for eCPRI Bing Zhao
2020-07-16 14:23   ` [dpdk-dev] [PATCH v3 0/7] add eCPRI support in mlx5 driver Bing Zhao
2020-07-16 14:23     ` [dpdk-dev] [PATCH v3 1/7] net/mlx5: add flow validation of eCPRI header Bing Zhao
2020-07-16 15:04       ` Slava Ovsiienko
2020-07-16 14:23     ` [dpdk-dev] [PATCH v3 2/7] net/mlx5: add flow translation " Bing Zhao
2020-07-16 15:04       ` Slava Ovsiienko
2020-07-16 14:23     ` [dpdk-dev] [PATCH v3 3/7] common/mlx5: add flex parser DevX structures Bing Zhao
2020-07-16 15:04       ` Slava Ovsiienko
2020-07-16 14:23     ` [dpdk-dev] [PATCH v3 4/7] common/mlx5: adding DevX command for flex parsers Bing Zhao
2020-07-16 15:05       ` Slava Ovsiienko
2020-07-16 14:23     ` [dpdk-dev] [PATCH v3 5/7] net/mlx5: create and destroy eCPRI flex parser Bing Zhao
2020-07-16 15:05       ` Slava Ovsiienko
2020-07-16 14:23     ` [dpdk-dev] [PATCH v3 6/7] net/mlx5: add eCPRI flex parser capacity check Bing Zhao
2020-07-16 15:05       ` Slava Ovsiienko
2020-07-16 14:23     ` [dpdk-dev] [PATCH v3 7/7] doc: update release notes and guides for eCPRI Bing Zhao
2020-07-16 15:05       ` Slava Ovsiienko
2020-07-17  7:11     ` [dpdk-dev] [PATCH v4 0/7] add eCPRI support in mlx5 driver Bing Zhao
2020-07-17  7:11       ` [dpdk-dev] [PATCH v4 1/7] net/mlx5: add flow validation of eCPRI header Bing Zhao
2020-07-17  7:11       ` [dpdk-dev] [PATCH v4 2/7] net/mlx5: add flow translation " Bing Zhao
2020-07-17  7:11       ` [dpdk-dev] [PATCH v4 3/7] common/mlx5: add flex parser DevX structures Bing Zhao
2020-07-17  7:11       ` [dpdk-dev] [PATCH v4 4/7] common/mlx5: adding DevX command for flex parsers Bing Zhao
2020-07-17  7:11       ` [dpdk-dev] [PATCH v4 5/7] net/mlx5: create and destroy eCPRI flex parser Bing Zhao
2020-07-17  7:11       ` [dpdk-dev] [PATCH v4 6/7] net/mlx5: add eCPRI flex parser capacity check Bing Zhao
2020-07-17  7:11       ` Bing Zhao [this message]
2020-07-17 12:55       ` [dpdk-dev] [PATCH v4 0/7] add eCPRI support in mlx5 driver Raslan Darawsheh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1594969911-105341-8-git-send-email-bingz@mellanox.com \
    --to=bingz@mellanox.com \
    --cc=dev@dpdk.org \
    --cc=matan@mellanox.com \
    --cc=netanelg@mellanox.com \
    --cc=orika@mellanox.com \
    --cc=rasland@mellanox.com \
    --cc=viacheslavo@mellanox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.