* [PATCH v2] ARM: dts: imx6qdl-gw: add Gateworks System Controller support
@ 2020-06-18 16:19 ` Tim Harvey
0 siblings, 0 replies; 17+ messages in thread
From: Tim Harvey @ 2020-06-18 16:19 UTC (permalink / raw)
To: Shawn Guo, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
devicetree, Rob Herring
Cc: Tim Harvey, rjones, linux-kernel, linux-arm-kernel
Add Gateworks System Controller support to Gateworks Ventana boards:
- add dt bindings for GSC mfd driver and hwmon driver for ADC's and
fan controllers.
- add dt bindings for gpio-keys driver for push-button and interrupt events
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
v2:
- use keycode bindings from linux-event-codes.h
- fix gw5910/gw5913 vdd_bat ADC mode (these boards use 16bit pre-scaled ADC)
---
arch/arm/boot/dts/imx6qdl-gw51xx.dtsi | 153 +++++++++++++++++++++++++++++--
arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 159 ++++++++++++++++++++++++++++++--
arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 165 +++++++++++++++++++++++++++++++--
arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 167 ++++++++++++++++++++++++++++++++--
arch/arm/boot/dts/imx6qdl-gw551x.dtsi | 147 ++++++++++++++++++++++++++++--
arch/arm/boot/dts/imx6qdl-gw552x.dtsi | 153 +++++++++++++++++++++++++++++--
arch/arm/boot/dts/imx6qdl-gw553x.dtsi | 141 +++++++++++++++++++++++++++-
arch/arm/boot/dts/imx6qdl-gw560x.dtsi | 164 +++++++++++++++++++++++++++++++--
arch/arm/boot/dts/imx6qdl-gw5903.dtsi | 140 +++++++++++++++++++++++++++-
arch/arm/boot/dts/imx6qdl-gw5904.dtsi | 141 +++++++++++++++++++++++++++-
arch/arm/boot/dts/imx6qdl-gw5907.dtsi | 142 ++++++++++++++++++++++++++++-
arch/arm/boot/dts/imx6qdl-gw5910.dtsi | 160 +++++++++++++++++++++++++++++++-
arch/arm/boot/dts/imx6qdl-gw5912.dtsi | 147 +++++++++++++++++++++++++++++-
arch/arm/boot/dts/imx6qdl-gw5913.dtsi | 153 ++++++++++++++++++++++++++++++-
14 files changed, 2075 insertions(+), 57 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
index 419a7cd..712458d 100644
--- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -19,6 +20,53 @@
bootargs = "console=ttymxc1,115200";
};
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user_pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user_pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key_erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom_wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch_hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -102,6 +150,103 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_an1";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+ };
+ };
+
+ gsc_gpio: pca9555@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
+ };
+
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
@@ -126,13 +271,6 @@
pagesize = <16>;
};
- gpio: pca9555@23 {
- compatible = "nxp,pca9555";
- reg = <0x23>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
rtc: ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
@@ -387,6 +525,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 /* GSC_IRQ# */
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index 60563ff..68dd8ef31 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -28,6 +29,53 @@
default-brightness-level = <7>;
};
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user_pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user_pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key_erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom_wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch_hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -165,6 +213,109 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_1p0";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+
+ channel@29 {
+ gw,mode = <1>;
+ reg = <0x29>;
+ label = "vdd_an1";
+ };
+ };
+ };
+
+ gsc_gpio: pca9555@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
+ };
+
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
@@ -189,13 +340,6 @@
pagesize = <16>;
};
- gpio: pca9555@23 {
- compatible = "nxp,pca9555";
- reg = <0x23>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
rtc: ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
@@ -504,6 +648,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index 8942bec..b583226 100644
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -28,6 +29,53 @@
default-brightness-level = <7>;
};
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user_pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user_pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key_erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom_wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch_hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -158,6 +206,115 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_1p0";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+
+ channel@26 {
+ gw,mode = <1>;
+ reg = <0x26>;
+ label = "vdd_gps";
+ };
+
+ channel@29 {
+ gw,mode = <1>;
+ reg = <0x29>;
+ label = "vdd_an1";
+ };
+ };
+ };
+
+ gsc_gpio: pca9555@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
+ };
+
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
@@ -182,13 +339,6 @@
pagesize = <16>;
};
- gpio: pca9555@23 {
- compatible = "nxp,pca9555";
- reg = <0x23>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
rtc: ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
@@ -486,6 +636,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index c40583d..3c00423 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/sound/fsl-imx-audmux.h>
/ {
@@ -29,6 +30,53 @@
default-brightness-level = <7>;
};
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user_pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user_pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key_erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom_wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch_hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -195,6 +243,117 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_1p0";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+
+ channel@26 {
+ gw,mode = <1>;
+ reg = <0x26>;
+ label = "vdd_gps";
+ };
+ };
+
+ fan-controller@2c {
+ compatible = "gw,gsc-fan";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2c>;
+ };
+ };
+
+ gsc_gpio: pca9555@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
+ };
+
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
@@ -219,13 +378,6 @@
pagesize = <16>;
};
- gpio: pca9555@23 {
- compatible = "nxp,pca9555";
- reg = <0x23>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
rtc: ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
@@ -571,6 +723,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
index c38e86e..1e2c7a7 100644
--- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
@@ -47,6 +47,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/media/tda1997x.h>
+#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/sound/fsl-imx-audmux.h>
/ {
@@ -63,6 +64,53 @@
bootargs = "console=ttymxc1,115200";
};
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user_pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user_pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key_erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom_wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch_hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -167,6 +215,97 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8a";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_1p0b";
+ };
+ };
+ };
+
+ gsc_gpio: pca9555@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
+ };
+
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
@@ -191,13 +330,6 @@
pagesize = <16>;
};
- gpio: pca9555@23 {
- compatible = "nxp,pca9555";
- reg = <0x23>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
rtc: ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
@@ -464,6 +596,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
index bb35971..46f21a3 100644
--- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -20,6 +21,53 @@
bootargs = "console=ttymxc1,115200";
};
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user_pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user_pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key_erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom_wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch_hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -92,6 +140,103 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_1p0";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+ };
+ };
+
+ gsc_gpio: pca9555@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
+ };
+
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
@@ -116,13 +261,6 @@
pagesize = <16>;
};
- gpio: pca9555@23 {
- compatible = "nxp,pca9555";
- reg = <0x23>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
rtc: ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
@@ -305,6 +443,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
index ee85031..036ead6 100644
--- a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
@@ -46,6 +46,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -61,6 +62,53 @@
stdout-path = &uart2;
};
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user_pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user_pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key_erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom_wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch_hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -130,11 +178,101 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- gpio: pca9555@23 {
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8a";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_1p0b";
+ };
+
+ channel@26 {
+ gw,mode = <1>;
+ reg = <0x26>;
+ label = "vdd_an1";
+ };
+ };
+ };
+
+ gsc_gpio: pca9555@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
};
eeprom1: eeprom@50 {
@@ -428,6 +566,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
index 69ca70d..e497b13 100644
--- a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
@@ -88,6 +88,53 @@
default-on;
};
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user_pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user_pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key_erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom_wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch_hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -243,6 +290,115 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_an1";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+
+ channel@26 {
+ gw,mode = <1>;
+ reg = <0x26>;
+ label = "vdd_gps";
+ };
+
+ channel@29 {
+ gw,mode = <1>;
+ reg = <0x29>;
+ label = "vdd_an2";
+ };
+ };
+ };
+
+ gsc_gpio: pca9555@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
+ };
+
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
@@ -267,13 +423,6 @@
pagesize = <16>;
};
- pca9555: gpio@23 {
- compatible = "nxp,pca9555";
- reg = <0x23>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
ds1672: rtc@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
@@ -608,6 +757,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
index aee9221..768ae46 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
@@ -46,6 +46,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
chosen {
@@ -71,6 +72,53 @@
default-brightness-level = <100>;
};
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user_pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user_pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key_erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom_wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch_hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -183,11 +231,101 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- pca9555: gpio@23 {
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_an1";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+ };
+ };
+
+ gsc_gpio: pca9555@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
};
eeprom1: eeprom@50 {
diff --git a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
index 76d6cf5..7eba6ed 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
@@ -46,6 +46,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -68,6 +69,53 @@
default-brightness-level = <7>;
};
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user_pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user_pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key_erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom_wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch_hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -205,11 +253,101 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- pca9555: gpio@23 {
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_an1";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+ };
+ };
+
+ gsc_gpio: pca9555@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
};
eeprom1: eeprom@50 {
@@ -503,6 +641,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 /* GSC_IRQ# */
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
index 0bdebdd..0e155fb 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -19,6 +20,53 @@
stdout-path = &uart2;
};
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user_pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user_pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key_erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom_wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch_hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -102,11 +150,101 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- gpio@23 {
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_an1";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+ };
+ };
+
+ gsc_gpio: pca9555@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
};
eeprom@50 {
@@ -133,7 +271,7 @@
pagesize = <16>;
};
- rtc@68 {
+ ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
index 0857de5..7571eb1 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -22,6 +23,53 @@
reg = <0x10000000 0x20000000>;
};
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user_pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user_pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key_erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom_wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch_hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -111,11 +159,121 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- gpio@23 {
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@6 {
+ gw,mode = <0>;
+ reg = <0x06>;
+ label = "temp";
+ };
+
+ channel@8 {
+ gw,mode = <3>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@82 {
+ gw,mode = <2>;
+ reg = <0x82>;
+ label = "vdd_vin";
+ gw,voltage-divider-ohms = <22100 1000>;
+ gw,voltage-offset-microvolt = <800000>;
+ };
+
+ channel@84 {
+ gw,mode = <2>;
+ reg = <0x84>;
+ label = "vdd_5p0";
+ gw,voltage-divider-ohms = <22100 10000>;
+ };
+
+ channel@86 {
+ gw,mode = <2>;
+ reg = <0x86>;
+ label = "vdd_3p3";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@88 {
+ gw,mode = <2>;
+ reg = <0x88>;
+ label = "vdd_2p5";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@8c {
+ gw,mode = <2>;
+ reg = <0x8c>;
+ label = "vdd_3p0";
+ };
+
+ channel@8e {
+ gw,mode = <2>;
+ reg = <0x8e>;
+ label = "vdd_arm";
+ };
+
+ channel@90 {
+ gw,mode = <2>;
+ reg = <0x90>;
+ label = "vdd_soc";
+ };
+
+ channel@92 {
+ gw,mode = <2>;
+ reg = <0x92>;
+ label = "vdd_1p5";
+ };
+
+ channel@98 {
+ gw,mode = <2>;
+ reg = <0x98>;
+ label = "vdd_1p8";
+ };
+
+ channel@9a {
+ gw,mode = <2>;
+ reg = <0x9a>;
+ label = "vdd_1p0";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@9c {
+ gw,mode = <2>;
+ reg = <0x9c>;
+ label = "vdd_an1";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@a2 {
+ gw,mode = <2>;
+ reg = <0xa2>;
+ label = "vdd_gsc";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+ };
+ };
+
+ gsc_gpio: pca9555@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
};
eeprom@50 {
diff --git a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
index 8c57fd2..e87870f 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -20,6 +21,53 @@
stdout-path = &uart2;
};
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user_pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user_pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key_erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom_wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch_hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -106,11 +154,108 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- gpio@23 {
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_1p0";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+ };
+
+ fan-controller@a {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "gw,gsc-fan";
+ reg = <0x0a>;
+ };
+ };
+
+ gsc_gpio: pca9555@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
};
eeprom@50 {
diff --git a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
index 635c203..8ad2d77 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -19,6 +20,53 @@
stdout-path = &uart2;
};
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user_pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user_pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key_erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom_wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch_hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -87,11 +135,114 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- gpio@23 {
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@6 {
+ gw,mode = <0>;
+ reg = <0x06>;
+ label = "temp";
+ };
+
+ channel@8 {
+ gw,mode = <3>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@82 {
+ gw,mode = <2>;
+ reg = <0x82>;
+ label = "vdd_vin";
+ gw,voltage-divider-ohms = <22100 1000>;
+ gw,voltage-offset-microvolt = <800000>;
+ };
+
+ channel@84 {
+ gw,mode = <2>;
+ reg = <0x84>;
+ label = "vdd_5p0";
+ gw,voltage-divider-ohms = <22100 10000>;
+ };
+
+ channel@86 {
+ gw,mode = <2>;
+ reg = <0x86>;
+ label = "vdd_3p3";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@88 {
+ gw,mode = <2>;
+ reg = <0x88>;
+ label = "vdd_2p5";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@8c {
+ gw,mode = <2>;
+ reg = <0x8c>;
+ label = "vdd_arm";
+ };
+
+ channel@8e {
+ gw,mode = <2>;
+ reg = <0x8e>;
+ label = "vdd_soc";
+ };
+
+ channel@90 {
+ gw,mode = <2>;
+ reg = <0x90>;
+ label = "vdd_1p5";
+ };
+
+ channel@92 {
+ gw,mode = <2>;
+ reg = <0x92>;
+ label = "vdd_1p0";
+ };
+
+ channel@98 {
+ gw,mode = <2>;
+ reg = <0x98>;
+ label = "vdd_3p0";
+ };
+
+ channel@9a {
+ gw,mode = <2>;
+ reg = <0x9a>;
+ label = "vdd_an1";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@a2 {
+ gw,mode = <2>;
+ reg = <0xa2>;
+ label = "vdd_gsc";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+ };
+ };
+
+ gsc_gpio: pca9555@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
};
eeprom@50 {
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 17+ messages in thread* Re: [PATCH v2] ARM: dts: imx6qdl-gw: add Gateworks System Controller support
2020-06-18 16:19 ` Tim Harvey
(?)
@ 2020-06-23 2:49 ` Shawn Guo
-1 siblings, 0 replies; 17+ messages in thread
From: Shawn Guo @ 2020-06-23 2:49 UTC (permalink / raw)
To: Tim Harvey
Cc: Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam, devicetree,
Rob Herring, linux-arm-kernel, linux-kernel, rjones
On Thu, Jun 18, 2020 at 09:19:09AM -0700, Tim Harvey wrote:
> Add Gateworks System Controller support to Gateworks Ventana boards:
> - add dt bindings for GSC mfd driver and hwmon driver for ADC's and
> fan controllers.
> - add dt bindings for gpio-keys driver for push-button and interrupt events
>
> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
> ---
> v2:
> - use keycode bindings from linux-event-codes.h
> - fix gw5910/gw5913 vdd_bat ADC mode (these boards use 16bit pre-scaled ADC)
>
> ---
> arch/arm/boot/dts/imx6qdl-gw51xx.dtsi | 153 +++++++++++++++++++++++++++++--
> arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 159 ++++++++++++++++++++++++++++++--
> arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 165 +++++++++++++++++++++++++++++++--
> arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 167 ++++++++++++++++++++++++++++++++--
> arch/arm/boot/dts/imx6qdl-gw551x.dtsi | 147 ++++++++++++++++++++++++++++--
> arch/arm/boot/dts/imx6qdl-gw552x.dtsi | 153 +++++++++++++++++++++++++++++--
> arch/arm/boot/dts/imx6qdl-gw553x.dtsi | 141 +++++++++++++++++++++++++++-
> arch/arm/boot/dts/imx6qdl-gw560x.dtsi | 164 +++++++++++++++++++++++++++++++--
> arch/arm/boot/dts/imx6qdl-gw5903.dtsi | 140 +++++++++++++++++++++++++++-
> arch/arm/boot/dts/imx6qdl-gw5904.dtsi | 141 +++++++++++++++++++++++++++-
> arch/arm/boot/dts/imx6qdl-gw5907.dtsi | 142 ++++++++++++++++++++++++++++-
> arch/arm/boot/dts/imx6qdl-gw5910.dtsi | 160 +++++++++++++++++++++++++++++++-
> arch/arm/boot/dts/imx6qdl-gw5912.dtsi | 147 +++++++++++++++++++++++++++++-
> arch/arm/boot/dts/imx6qdl-gw5913.dtsi | 153 ++++++++++++++++++++++++++++++-
> 14 files changed, 2075 insertions(+), 57 deletions(-)
>
> diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
> index 419a7cd..712458d 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
> @@ -4,6 +4,7 @@
> */
>
> #include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/linux-event-codes.h>
>
> / {
> /* these are used by bootloader for disabling nodes */
> @@ -19,6 +20,53 @@
> bootargs = "console=ttymxc1,115200";
> };
>
> + gpio_keys {
We use hyphen instead of underscore in node name.
Shawn
> + compatible = "gpio-keys";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + user_pb {
> + label = "user_pb";
> + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
> + linux,code = <BTN_0>;
> + };
> +
> + user_pb1x {
> + label = "user_pb1x";
> + linux,code = <BTN_1>;
> + interrupt-parent = <&gsc>;
> + interrupts = <0>;
> + };
> +
> + key_erased {
> + label = "key-erased";
> + linux,code = <BTN_2>;
> + interrupt-parent = <&gsc>;
> + interrupts = <1>;
> + };
> +
> + eeprom_wp {
> + label = "eeprom_wp";
> + linux,code = <BTN_3>;
> + interrupt-parent = <&gsc>;
> + interrupts = <2>;
> + };
> +
> + tamper {
> + label = "tamper";
> + linux,code = <BTN_4>;
> + interrupt-parent = <&gsc>;
> + interrupts = <5>;
> + };
> +
> + switch_hold {
> + label = "switch_hold";
> + linux,code = <BTN_5>;
> + interrupt-parent = <&gsc>;
> + interrupts = <7>;
> + };
> + };
> +
> leds {
> compatible = "gpio-leds";
> pinctrl-names = "default";
> @@ -102,6 +150,103 @@
> pinctrl-0 = <&pinctrl_i2c1>;
> status = "okay";
>
> + gsc: gsc@20 {
> + compatible = "gw,gsc";
> + reg = <0x20>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + #size-cells = <0>;
> +
> + adc {
> + compatible = "gw,gsc-adc";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + channel@0 {
> + gw,mode = <0>;
> + reg = <0x00>;
> + label = "temp";
> + };
> +
> + channel@2 {
> + gw,mode = <1>;
> + reg = <0x02>;
> + label = "vdd_vin";
> + };
> +
> + channel@5 {
> + gw,mode = <1>;
> + reg = <0x05>;
> + label = "vdd_3p3";
> + };
> +
> + channel@8 {
> + gw,mode = <1>;
> + reg = <0x08>;
> + label = "vdd_bat";
> + };
> +
> + channel@b {
> + gw,mode = <1>;
> + reg = <0x0b>;
> + label = "vdd_5p0";
> + };
> +
> + channel@e {
> + gw,mode = <1>;
> + reg = <0xe>;
> + label = "vdd_arm";
> + };
> +
> + channel@11 {
> + gw,mode = <1>;
> + reg = <0x11>;
> + label = "vdd_soc";
> + };
> +
> + channel@14 {
> + gw,mode = <1>;
> + reg = <0x14>;
> + label = "vdd_3p0";
> + };
> +
> + channel@17 {
> + gw,mode = <1>;
> + reg = <0x17>;
> + label = "vdd_1p5";
> + };
> +
> + channel@1d {
> + gw,mode = <1>;
> + reg = <0x1d>;
> + label = "vdd_1p8";
> + };
> +
> + channel@20 {
> + gw,mode = <1>;
> + reg = <0x20>;
> + label = "vdd_an1";
> + };
> +
> + channel@23 {
> + gw,mode = <1>;
> + reg = <0x23>;
> + label = "vdd_2p5";
> + };
> + };
> + };
> +
> + gsc_gpio: pca9555@23 {
> + compatible = "nxp,pca9555";
> + reg = <0x23>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-parent = <&gsc>;
> + interrupts = <4>;
> + };
> +
> eeprom1: eeprom@50 {
> compatible = "atmel,24c02";
> reg = <0x50>;
> @@ -126,13 +271,6 @@
> pagesize = <16>;
> };
>
> - gpio: pca9555@23 {
> - compatible = "nxp,pca9555";
> - reg = <0x23>;
> - gpio-controller;
> - #gpio-cells = <2>;
> - };
> -
> rtc: ds1672@68 {
> compatible = "dallas,ds1672";
> reg = <0x68>;
> @@ -387,6 +525,7 @@
> fsl,pins = <
> MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
> MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
> + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 /* GSC_IRQ# */
> >;
> };
>
> diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
> index 60563ff..68dd8ef31 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
> @@ -4,6 +4,7 @@
> */
>
> #include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/linux-event-codes.h>
>
> / {
> /* these are used by bootloader for disabling nodes */
> @@ -28,6 +29,53 @@
> default-brightness-level = <7>;
> };
>
> + gpio_keys {
> + compatible = "gpio-keys";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + user_pb {
> + label = "user_pb";
> + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
> + linux,code = <BTN_0>;
> + };
> +
> + user_pb1x {
> + label = "user_pb1x";
> + linux,code = <BTN_1>;
> + interrupt-parent = <&gsc>;
> + interrupts = <0>;
> + };
> +
> + key_erased {
> + label = "key-erased";
> + linux,code = <BTN_2>;
> + interrupt-parent = <&gsc>;
> + interrupts = <1>;
> + };
> +
> + eeprom_wp {
> + label = "eeprom_wp";
> + linux,code = <BTN_3>;
> + interrupt-parent = <&gsc>;
> + interrupts = <2>;
> + };
> +
> + tamper {
> + label = "tamper";
> + linux,code = <BTN_4>;
> + interrupt-parent = <&gsc>;
> + interrupts = <5>;
> + };
> +
> + switch_hold {
> + label = "switch_hold";
> + linux,code = <BTN_5>;
> + interrupt-parent = <&gsc>;
> + interrupts = <7>;
> + };
> + };
> +
> leds {
> compatible = "gpio-leds";
> pinctrl-names = "default";
> @@ -165,6 +213,109 @@
> pinctrl-0 = <&pinctrl_i2c1>;
> status = "okay";
>
> + gsc: gsc@20 {
> + compatible = "gw,gsc";
> + reg = <0x20>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + #size-cells = <0>;
> +
> + adc {
> + compatible = "gw,gsc-adc";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + channel@0 {
> + gw,mode = <0>;
> + reg = <0x00>;
> + label = "temp";
> + };
> +
> + channel@2 {
> + gw,mode = <1>;
> + reg = <0x02>;
> + label = "vdd_vin";
> + };
> +
> + channel@5 {
> + gw,mode = <1>;
> + reg = <0x05>;
> + label = "vdd_3p3";
> + };
> +
> + channel@8 {
> + gw,mode = <1>;
> + reg = <0x08>;
> + label = "vdd_bat";
> + };
> +
> + channel@b {
> + gw,mode = <1>;
> + reg = <0x0b>;
> + label = "vdd_5p0";
> + };
> +
> + channel@e {
> + gw,mode = <1>;
> + reg = <0xe>;
> + label = "vdd_arm";
> + };
> +
> + channel@11 {
> + gw,mode = <1>;
> + reg = <0x11>;
> + label = "vdd_soc";
> + };
> +
> + channel@14 {
> + gw,mode = <1>;
> + reg = <0x14>;
> + label = "vdd_3p0";
> + };
> +
> + channel@17 {
> + gw,mode = <1>;
> + reg = <0x17>;
> + label = "vdd_1p5";
> + };
> +
> + channel@1d {
> + gw,mode = <1>;
> + reg = <0x1d>;
> + label = "vdd_1p8";
> + };
> +
> + channel@20 {
> + gw,mode = <1>;
> + reg = <0x20>;
> + label = "vdd_1p0";
> + };
> +
> + channel@23 {
> + gw,mode = <1>;
> + reg = <0x23>;
> + label = "vdd_2p5";
> + };
> +
> + channel@29 {
> + gw,mode = <1>;
> + reg = <0x29>;
> + label = "vdd_an1";
> + };
> + };
> + };
> +
> + gsc_gpio: pca9555@23 {
> + compatible = "nxp,pca9555";
> + reg = <0x23>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-parent = <&gsc>;
> + interrupts = <4>;
> + };
> +
> eeprom1: eeprom@50 {
> compatible = "atmel,24c02";
> reg = <0x50>;
> @@ -189,13 +340,6 @@
> pagesize = <16>;
> };
>
> - gpio: pca9555@23 {
> - compatible = "nxp,pca9555";
> - reg = <0x23>;
> - gpio-controller;
> - #gpio-cells = <2>;
> - };
> -
> rtc: ds1672@68 {
> compatible = "dallas,ds1672";
> reg = <0x68>;
> @@ -504,6 +648,7 @@
> fsl,pins = <
> MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
> MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
> + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
> >;
> };
>
> diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
> index 8942bec..b583226 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
> @@ -4,6 +4,7 @@
> */
>
> #include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/linux-event-codes.h>
>
> / {
> /* these are used by bootloader for disabling nodes */
> @@ -28,6 +29,53 @@
> default-brightness-level = <7>;
> };
>
> + gpio_keys {
> + compatible = "gpio-keys";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + user_pb {
> + label = "user_pb";
> + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
> + linux,code = <BTN_0>;
> + };
> +
> + user_pb1x {
> + label = "user_pb1x";
> + linux,code = <BTN_1>;
> + interrupt-parent = <&gsc>;
> + interrupts = <0>;
> + };
> +
> + key_erased {
> + label = "key-erased";
> + linux,code = <BTN_2>;
> + interrupt-parent = <&gsc>;
> + interrupts = <1>;
> + };
> +
> + eeprom_wp {
> + label = "eeprom_wp";
> + linux,code = <BTN_3>;
> + interrupt-parent = <&gsc>;
> + interrupts = <2>;
> + };
> +
> + tamper {
> + label = "tamper";
> + linux,code = <BTN_4>;
> + interrupt-parent = <&gsc>;
> + interrupts = <5>;
> + };
> +
> + switch_hold {
> + label = "switch_hold";
> + linux,code = <BTN_5>;
> + interrupt-parent = <&gsc>;
> + interrupts = <7>;
> + };
> + };
> +
> leds {
> compatible = "gpio-leds";
> pinctrl-names = "default";
> @@ -158,6 +206,115 @@
> pinctrl-0 = <&pinctrl_i2c1>;
> status = "okay";
>
> + gsc: gsc@20 {
> + compatible = "gw,gsc";
> + reg = <0x20>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + #size-cells = <0>;
> +
> + adc {
> + compatible = "gw,gsc-adc";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + channel@0 {
> + gw,mode = <0>;
> + reg = <0x00>;
> + label = "temp";
> + };
> +
> + channel@2 {
> + gw,mode = <1>;
> + reg = <0x02>;
> + label = "vdd_vin";
> + };
> +
> + channel@5 {
> + gw,mode = <1>;
> + reg = <0x05>;
> + label = "vdd_3p3";
> + };
> +
> + channel@8 {
> + gw,mode = <1>;
> + reg = <0x08>;
> + label = "vdd_bat";
> + };
> +
> + channel@b {
> + gw,mode = <1>;
> + reg = <0x0b>;
> + label = "vdd_5p0";
> + };
> +
> + channel@e {
> + gw,mode = <1>;
> + reg = <0xe>;
> + label = "vdd_arm";
> + };
> +
> + channel@11 {
> + gw,mode = <1>;
> + reg = <0x11>;
> + label = "vdd_soc";
> + };
> +
> + channel@14 {
> + gw,mode = <1>;
> + reg = <0x14>;
> + label = "vdd_3p0";
> + };
> +
> + channel@17 {
> + gw,mode = <1>;
> + reg = <0x17>;
> + label = "vdd_1p5";
> + };
> +
> + channel@1d {
> + gw,mode = <1>;
> + reg = <0x1d>;
> + label = "vdd_1p8";
> + };
> +
> + channel@20 {
> + gw,mode = <1>;
> + reg = <0x20>;
> + label = "vdd_1p0";
> + };
> +
> + channel@23 {
> + gw,mode = <1>;
> + reg = <0x23>;
> + label = "vdd_2p5";
> + };
> +
> + channel@26 {
> + gw,mode = <1>;
> + reg = <0x26>;
> + label = "vdd_gps";
> + };
> +
> + channel@29 {
> + gw,mode = <1>;
> + reg = <0x29>;
> + label = "vdd_an1";
> + };
> + };
> + };
> +
> + gsc_gpio: pca9555@23 {
> + compatible = "nxp,pca9555";
> + reg = <0x23>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-parent = <&gsc>;
> + interrupts = <4>;
> + };
> +
> eeprom1: eeprom@50 {
> compatible = "atmel,24c02";
> reg = <0x50>;
> @@ -182,13 +339,6 @@
> pagesize = <16>;
> };
>
> - gpio: pca9555@23 {
> - compatible = "nxp,pca9555";
> - reg = <0x23>;
> - gpio-controller;
> - #gpio-cells = <2>;
> - };
> -
> rtc: ds1672@68 {
> compatible = "dallas,ds1672";
> reg = <0x68>;
> @@ -486,6 +636,7 @@
> fsl,pins = <
> MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
> MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
> + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
> >;
> };
>
> diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
> index c40583d..3c00423 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
> @@ -4,6 +4,7 @@
> */
>
> #include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/linux-event-codes.h>
> #include <dt-bindings/sound/fsl-imx-audmux.h>
>
> / {
> @@ -29,6 +30,53 @@
> default-brightness-level = <7>;
> };
>
> + gpio_keys {
> + compatible = "gpio-keys";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + user_pb {
> + label = "user_pb";
> + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
> + linux,code = <BTN_0>;
> + };
> +
> + user_pb1x {
> + label = "user_pb1x";
> + linux,code = <BTN_1>;
> + interrupt-parent = <&gsc>;
> + interrupts = <0>;
> + };
> +
> + key_erased {
> + label = "key-erased";
> + linux,code = <BTN_2>;
> + interrupt-parent = <&gsc>;
> + interrupts = <1>;
> + };
> +
> + eeprom_wp {
> + label = "eeprom_wp";
> + linux,code = <BTN_3>;
> + interrupt-parent = <&gsc>;
> + interrupts = <2>;
> + };
> +
> + tamper {
> + label = "tamper";
> + linux,code = <BTN_4>;
> + interrupt-parent = <&gsc>;
> + interrupts = <5>;
> + };
> +
> + switch_hold {
> + label = "switch_hold";
> + linux,code = <BTN_5>;
> + interrupt-parent = <&gsc>;
> + interrupts = <7>;
> + };
> + };
> +
> leds {
> compatible = "gpio-leds";
> pinctrl-names = "default";
> @@ -195,6 +243,117 @@
> pinctrl-0 = <&pinctrl_i2c1>;
> status = "okay";
>
> + gsc: gsc@20 {
> + compatible = "gw,gsc";
> + reg = <0x20>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + adc {
> + compatible = "gw,gsc-adc";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + channel@0 {
> + gw,mode = <0>;
> + reg = <0x00>;
> + label = "temp";
> + };
> +
> + channel@2 {
> + gw,mode = <1>;
> + reg = <0x02>;
> + label = "vdd_vin";
> + };
> +
> + channel@5 {
> + gw,mode = <1>;
> + reg = <0x05>;
> + label = "vdd_3p3";
> + };
> +
> + channel@8 {
> + gw,mode = <1>;
> + reg = <0x08>;
> + label = "vdd_bat";
> + };
> +
> + channel@b {
> + gw,mode = <1>;
> + reg = <0x0b>;
> + label = "vdd_5p0";
> + };
> +
> + channel@e {
> + gw,mode = <1>;
> + reg = <0xe>;
> + label = "vdd_arm";
> + };
> +
> + channel@11 {
> + gw,mode = <1>;
> + reg = <0x11>;
> + label = "vdd_soc";
> + };
> +
> + channel@14 {
> + gw,mode = <1>;
> + reg = <0x14>;
> + label = "vdd_3p0";
> + };
> +
> + channel@17 {
> + gw,mode = <1>;
> + reg = <0x17>;
> + label = "vdd_1p5";
> + };
> +
> + channel@1d {
> + gw,mode = <1>;
> + reg = <0x1d>;
> + label = "vdd_1p8";
> + };
> +
> + channel@20 {
> + gw,mode = <1>;
> + reg = <0x20>;
> + label = "vdd_1p0";
> + };
> +
> + channel@23 {
> + gw,mode = <1>;
> + reg = <0x23>;
> + label = "vdd_2p5";
> + };
> +
> + channel@26 {
> + gw,mode = <1>;
> + reg = <0x26>;
> + label = "vdd_gps";
> + };
> + };
> +
> + fan-controller@2c {
> + compatible = "gw,gsc-fan";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x2c>;
> + };
> + };
> +
> + gsc_gpio: pca9555@23 {
> + compatible = "nxp,pca9555";
> + reg = <0x23>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-parent = <&gsc>;
> + interrupts = <4>;
> + };
> +
> eeprom1: eeprom@50 {
> compatible = "atmel,24c02";
> reg = <0x50>;
> @@ -219,13 +378,6 @@
> pagesize = <16>;
> };
>
> - gpio: pca9555@23 {
> - compatible = "nxp,pca9555";
> - reg = <0x23>;
> - gpio-controller;
> - #gpio-cells = <2>;
> - };
> -
> rtc: ds1672@68 {
> compatible = "dallas,ds1672";
> reg = <0x68>;
> @@ -571,6 +723,7 @@
> fsl,pins = <
> MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
> MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
> + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
> >;
> };
>
> diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
> index c38e86e..1e2c7a7 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
> @@ -47,6 +47,7 @@
>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/media/tda1997x.h>
> +#include <dt-bindings/input/linux-event-codes.h>
> #include <dt-bindings/sound/fsl-imx-audmux.h>
>
> / {
> @@ -63,6 +64,53 @@
> bootargs = "console=ttymxc1,115200";
> };
>
> + gpio_keys {
> + compatible = "gpio-keys";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + user_pb {
> + label = "user_pb";
> + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
> + linux,code = <BTN_0>;
> + };
> +
> + user_pb1x {
> + label = "user_pb1x";
> + linux,code = <BTN_1>;
> + interrupt-parent = <&gsc>;
> + interrupts = <0>;
> + };
> +
> + key_erased {
> + label = "key-erased";
> + linux,code = <BTN_2>;
> + interrupt-parent = <&gsc>;
> + interrupts = <1>;
> + };
> +
> + eeprom_wp {
> + label = "eeprom_wp";
> + linux,code = <BTN_3>;
> + interrupt-parent = <&gsc>;
> + interrupts = <2>;
> + };
> +
> + tamper {
> + label = "tamper";
> + linux,code = <BTN_4>;
> + interrupt-parent = <&gsc>;
> + interrupts = <5>;
> + };
> +
> + switch_hold {
> + label = "switch_hold";
> + linux,code = <BTN_5>;
> + interrupt-parent = <&gsc>;
> + interrupts = <7>;
> + };
> + };
> +
> leds {
> compatible = "gpio-leds";
> pinctrl-names = "default";
> @@ -167,6 +215,97 @@
> pinctrl-0 = <&pinctrl_i2c1>;
> status = "okay";
>
> + gsc: gsc@20 {
> + compatible = "gw,gsc";
> + reg = <0x20>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + #size-cells = <0>;
> +
> + adc {
> + compatible = "gw,gsc-adc";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + channel@0 {
> + gw,mode = <0>;
> + reg = <0x00>;
> + label = "temp";
> + };
> +
> + channel@2 {
> + gw,mode = <1>;
> + reg = <0x02>;
> + label = "vdd_vin";
> + };
> +
> + channel@5 {
> + gw,mode = <1>;
> + reg = <0x05>;
> + label = "vdd_3p3";
> + };
> +
> + channel@8 {
> + gw,mode = <1>;
> + reg = <0x08>;
> + label = "vdd_bat";
> + };
> +
> + channel@b {
> + gw,mode = <1>;
> + reg = <0x0b>;
> + label = "vdd_5p0";
> + };
> +
> + channel@e {
> + gw,mode = <1>;
> + reg = <0xe>;
> + label = "vdd_arm";
> + };
> +
> + channel@11 {
> + gw,mode = <1>;
> + reg = <0x11>;
> + label = "vdd_soc";
> + };
> +
> + channel@14 {
> + gw,mode = <1>;
> + reg = <0x14>;
> + label = "vdd_3p0";
> + };
> +
> + channel@17 {
> + gw,mode = <1>;
> + reg = <0x17>;
> + label = "vdd_1p5";
> + };
> +
> + channel@1d {
> + gw,mode = <1>;
> + reg = <0x1d>;
> + label = "vdd_1p8a";
> + };
> +
> + channel@20 {
> + gw,mode = <1>;
> + reg = <0x20>;
> + label = "vdd_1p0b";
> + };
> + };
> + };
> +
> + gsc_gpio: pca9555@23 {
> + compatible = "nxp,pca9555";
> + reg = <0x23>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-parent = <&gsc>;
> + interrupts = <4>;
> + };
> +
> eeprom1: eeprom@50 {
> compatible = "atmel,24c02";
> reg = <0x50>;
> @@ -191,13 +330,6 @@
> pagesize = <16>;
> };
>
> - gpio: pca9555@23 {
> - compatible = "nxp,pca9555";
> - reg = <0x23>;
> - gpio-controller;
> - #gpio-cells = <2>;
> - };
> -
> rtc: ds1672@68 {
> compatible = "dallas,ds1672";
> reg = <0x68>;
> @@ -464,6 +596,7 @@
> fsl,pins = <
> MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
> MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
> + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
> >;
> };
>
> diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
> index bb35971..46f21a3 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
> @@ -4,6 +4,7 @@
> */
>
> #include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/linux-event-codes.h>
>
> / {
> /* these are used by bootloader for disabling nodes */
> @@ -20,6 +21,53 @@
> bootargs = "console=ttymxc1,115200";
> };
>
> + gpio_keys {
> + compatible = "gpio-keys";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + user_pb {
> + label = "user_pb";
> + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
> + linux,code = <BTN_0>;
> + };
> +
> + user_pb1x {
> + label = "user_pb1x";
> + linux,code = <BTN_1>;
> + interrupt-parent = <&gsc>;
> + interrupts = <0>;
> + };
> +
> + key_erased {
> + label = "key-erased";
> + linux,code = <BTN_2>;
> + interrupt-parent = <&gsc>;
> + interrupts = <1>;
> + };
> +
> + eeprom_wp {
> + label = "eeprom_wp";
> + linux,code = <BTN_3>;
> + interrupt-parent = <&gsc>;
> + interrupts = <2>;
> + };
> +
> + tamper {
> + label = "tamper";
> + linux,code = <BTN_4>;
> + interrupt-parent = <&gsc>;
> + interrupts = <5>;
> + };
> +
> + switch_hold {
> + label = "switch_hold";
> + linux,code = <BTN_5>;
> + interrupt-parent = <&gsc>;
> + interrupts = <7>;
> + };
> + };
> +
> leds {
> compatible = "gpio-leds";
> pinctrl-names = "default";
> @@ -92,6 +140,103 @@
> pinctrl-0 = <&pinctrl_i2c1>;
> status = "okay";
>
> + gsc: gsc@20 {
> + compatible = "gw,gsc";
> + reg = <0x20>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + #size-cells = <0>;
> +
> + adc {
> + compatible = "gw,gsc-adc";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + channel@0 {
> + gw,mode = <0>;
> + reg = <0x00>;
> + label = "temp";
> + };
> +
> + channel@2 {
> + gw,mode = <1>;
> + reg = <0x02>;
> + label = "vdd_vin";
> + };
> +
> + channel@5 {
> + gw,mode = <1>;
> + reg = <0x05>;
> + label = "vdd_3p3";
> + };
> +
> + channel@8 {
> + gw,mode = <1>;
> + reg = <0x08>;
> + label = "vdd_bat";
> + };
> +
> + channel@b {
> + gw,mode = <1>;
> + reg = <0x0b>;
> + label = "vdd_5p0";
> + };
> +
> + channel@e {
> + gw,mode = <1>;
> + reg = <0xe>;
> + label = "vdd_arm";
> + };
> +
> + channel@11 {
> + gw,mode = <1>;
> + reg = <0x11>;
> + label = "vdd_soc";
> + };
> +
> + channel@14 {
> + gw,mode = <1>;
> + reg = <0x14>;
> + label = "vdd_3p0";
> + };
> +
> + channel@17 {
> + gw,mode = <1>;
> + reg = <0x17>;
> + label = "vdd_1p5";
> + };
> +
> + channel@1d {
> + gw,mode = <1>;
> + reg = <0x1d>;
> + label = "vdd_1p8";
> + };
> +
> + channel@20 {
> + gw,mode = <1>;
> + reg = <0x20>;
> + label = "vdd_1p0";
> + };
> +
> + channel@23 {
> + gw,mode = <1>;
> + reg = <0x23>;
> + label = "vdd_2p5";
> + };
> + };
> + };
> +
> + gsc_gpio: pca9555@23 {
> + compatible = "nxp,pca9555";
> + reg = <0x23>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-parent = <&gsc>;
> + interrupts = <4>;
> + };
> +
> eeprom1: eeprom@50 {
> compatible = "atmel,24c02";
> reg = <0x50>;
> @@ -116,13 +261,6 @@
> pagesize = <16>;
> };
>
> - gpio: pca9555@23 {
> - compatible = "nxp,pca9555";
> - reg = <0x23>;
> - gpio-controller;
> - #gpio-cells = <2>;
> - };
> -
> rtc: ds1672@68 {
> compatible = "dallas,ds1672";
> reg = <0x68>;
> @@ -305,6 +443,7 @@
> fsl,pins = <
> MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
> MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
> + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
> >;
> };
>
> diff --git a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
> index ee85031..036ead6 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
> @@ -46,6 +46,7 @@
> */
>
> #include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/linux-event-codes.h>
>
> / {
> /* these are used by bootloader for disabling nodes */
> @@ -61,6 +62,53 @@
> stdout-path = &uart2;
> };
>
> + gpio_keys {
> + compatible = "gpio-keys";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + user_pb {
> + label = "user_pb";
> + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
> + linux,code = <BTN_0>;
> + };
> +
> + user_pb1x {
> + label = "user_pb1x";
> + linux,code = <BTN_1>;
> + interrupt-parent = <&gsc>;
> + interrupts = <0>;
> + };
> +
> + key_erased {
> + label = "key-erased";
> + linux,code = <BTN_2>;
> + interrupt-parent = <&gsc>;
> + interrupts = <1>;
> + };
> +
> + eeprom_wp {
> + label = "eeprom_wp";
> + linux,code = <BTN_3>;
> + interrupt-parent = <&gsc>;
> + interrupts = <2>;
> + };
> +
> + tamper {
> + label = "tamper";
> + linux,code = <BTN_4>;
> + interrupt-parent = <&gsc>;
> + interrupts = <5>;
> + };
> +
> + switch_hold {
> + label = "switch_hold";
> + linux,code = <BTN_5>;
> + interrupt-parent = <&gsc>;
> + interrupts = <7>;
> + };
> + };
> +
> leds {
> compatible = "gpio-leds";
> pinctrl-names = "default";
> @@ -130,11 +178,101 @@
> pinctrl-0 = <&pinctrl_i2c1>;
> status = "okay";
>
> - gpio: pca9555@23 {
> + gsc: gsc@20 {
> + compatible = "gw,gsc";
> + reg = <0x20>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + #size-cells = <0>;
> +
> + adc {
> + compatible = "gw,gsc-adc";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + channel@0 {
> + gw,mode = <0>;
> + reg = <0x00>;
> + label = "temp";
> + };
> +
> + channel@2 {
> + gw,mode = <1>;
> + reg = <0x02>;
> + label = "vdd_vin";
> + };
> +
> + channel@5 {
> + gw,mode = <1>;
> + reg = <0x05>;
> + label = "vdd_3p3";
> + };
> +
> + channel@8 {
> + gw,mode = <1>;
> + reg = <0x08>;
> + label = "vdd_bat";
> + };
> +
> + channel@b {
> + gw,mode = <1>;
> + reg = <0x0b>;
> + label = "vdd_5p0";
> + };
> +
> + channel@e {
> + gw,mode = <1>;
> + reg = <0xe>;
> + label = "vdd_arm";
> + };
> +
> + channel@11 {
> + gw,mode = <1>;
> + reg = <0x11>;
> + label = "vdd_soc";
> + };
> +
> + channel@14 {
> + gw,mode = <1>;
> + reg = <0x14>;
> + label = "vdd_3p0";
> + };
> +
> + channel@17 {
> + gw,mode = <1>;
> + reg = <0x17>;
> + label = "vdd_1p5";
> + };
> +
> + channel@1d {
> + gw,mode = <1>;
> + reg = <0x1d>;
> + label = "vdd_1p8a";
> + };
> +
> + channel@20 {
> + gw,mode = <1>;
> + reg = <0x20>;
> + label = "vdd_1p0b";
> + };
> +
> + channel@26 {
> + gw,mode = <1>;
> + reg = <0x26>;
> + label = "vdd_an1";
> + };
> + };
> + };
> +
> + gsc_gpio: pca9555@23 {
> compatible = "nxp,pca9555";
> reg = <0x23>;
> gpio-controller;
> #gpio-cells = <2>;
> + interrupt-parent = <&gsc>;
> + interrupts = <4>;
> };
>
> eeprom1: eeprom@50 {
> @@ -428,6 +566,7 @@
> fsl,pins = <
> MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
> MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
> + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
> >;
> };
>
> diff --git a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
> index 69ca70d..e497b13 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
> @@ -88,6 +88,53 @@
> default-on;
> };
>
> + gpio_keys {
> + compatible = "gpio-keys";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + user_pb {
> + label = "user_pb";
> + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
> + linux,code = <BTN_0>;
> + };
> +
> + user_pb1x {
> + label = "user_pb1x";
> + linux,code = <BTN_1>;
> + interrupt-parent = <&gsc>;
> + interrupts = <0>;
> + };
> +
> + key_erased {
> + label = "key-erased";
> + linux,code = <BTN_2>;
> + interrupt-parent = <&gsc>;
> + interrupts = <1>;
> + };
> +
> + eeprom_wp {
> + label = "eeprom_wp";
> + linux,code = <BTN_3>;
> + interrupt-parent = <&gsc>;
> + interrupts = <2>;
> + };
> +
> + tamper {
> + label = "tamper";
> + linux,code = <BTN_4>;
> + interrupt-parent = <&gsc>;
> + interrupts = <5>;
> + };
> +
> + switch_hold {
> + label = "switch_hold";
> + linux,code = <BTN_5>;
> + interrupt-parent = <&gsc>;
> + interrupts = <7>;
> + };
> + };
> +
> leds {
> compatible = "gpio-leds";
> pinctrl-names = "default";
> @@ -243,6 +290,115 @@
> pinctrl-0 = <&pinctrl_i2c1>;
> status = "okay";
>
> + gsc: gsc@20 {
> + compatible = "gw,gsc";
> + reg = <0x20>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + #size-cells = <0>;
> +
> + adc {
> + compatible = "gw,gsc-adc";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + channel@0 {
> + gw,mode = <0>;
> + reg = <0x00>;
> + label = "temp";
> + };
> +
> + channel@2 {
> + gw,mode = <1>;
> + reg = <0x02>;
> + label = "vdd_vin";
> + };
> +
> + channel@5 {
> + gw,mode = <1>;
> + reg = <0x05>;
> + label = "vdd_3p3";
> + };
> +
> + channel@8 {
> + gw,mode = <1>;
> + reg = <0x08>;
> + label = "vdd_bat";
> + };
> +
> + channel@b {
> + gw,mode = <1>;
> + reg = <0x0b>;
> + label = "vdd_5p0";
> + };
> +
> + channel@e {
> + gw,mode = <1>;
> + reg = <0xe>;
> + label = "vdd_arm";
> + };
> +
> + channel@11 {
> + gw,mode = <1>;
> + reg = <0x11>;
> + label = "vdd_soc";
> + };
> +
> + channel@14 {
> + gw,mode = <1>;
> + reg = <0x14>;
> + label = "vdd_3p0";
> + };
> +
> + channel@17 {
> + gw,mode = <1>;
> + reg = <0x17>;
> + label = "vdd_1p5";
> + };
> +
> + channel@1d {
> + gw,mode = <1>;
> + reg = <0x1d>;
> + label = "vdd_1p8";
> + };
> +
> + channel@20 {
> + gw,mode = <1>;
> + reg = <0x20>;
> + label = "vdd_an1";
> + };
> +
> + channel@23 {
> + gw,mode = <1>;
> + reg = <0x23>;
> + label = "vdd_2p5";
> + };
> +
> + channel@26 {
> + gw,mode = <1>;
> + reg = <0x26>;
> + label = "vdd_gps";
> + };
> +
> + channel@29 {
> + gw,mode = <1>;
> + reg = <0x29>;
> + label = "vdd_an2";
> + };
> + };
> + };
> +
> + gsc_gpio: pca9555@23 {
> + compatible = "nxp,pca9555";
> + reg = <0x23>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-parent = <&gsc>;
> + interrupts = <4>;
> + };
> +
> eeprom1: eeprom@50 {
> compatible = "atmel,24c02";
> reg = <0x50>;
> @@ -267,13 +423,6 @@
> pagesize = <16>;
> };
>
> - pca9555: gpio@23 {
> - compatible = "nxp,pca9555";
> - reg = <0x23>;
> - gpio-controller;
> - #gpio-cells = <2>;
> - };
> -
> ds1672: rtc@68 {
> compatible = "dallas,ds1672";
> reg = <0x68>;
> @@ -608,6 +757,7 @@
> fsl,pins = <
> MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
> MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
> + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
> >;
> };
>
> diff --git a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
> index aee9221..768ae46 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
> @@ -46,6 +46,7 @@
> */
>
> #include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/linux-event-codes.h>
>
> / {
> chosen {
> @@ -71,6 +72,53 @@
> default-brightness-level = <100>;
> };
>
> + gpio_keys {
> + compatible = "gpio-keys";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + user_pb {
> + label = "user_pb";
> + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
> + linux,code = <BTN_0>;
> + };
> +
> + user_pb1x {
> + label = "user_pb1x";
> + linux,code = <BTN_1>;
> + interrupt-parent = <&gsc>;
> + interrupts = <0>;
> + };
> +
> + key_erased {
> + label = "key-erased";
> + linux,code = <BTN_2>;
> + interrupt-parent = <&gsc>;
> + interrupts = <1>;
> + };
> +
> + eeprom_wp {
> + label = "eeprom_wp";
> + linux,code = <BTN_3>;
> + interrupt-parent = <&gsc>;
> + interrupts = <2>;
> + };
> +
> + tamper {
> + label = "tamper";
> + linux,code = <BTN_4>;
> + interrupt-parent = <&gsc>;
> + interrupts = <5>;
> + };
> +
> + switch_hold {
> + label = "switch_hold";
> + linux,code = <BTN_5>;
> + interrupt-parent = <&gsc>;
> + interrupts = <7>;
> + };
> + };
> +
> leds {
> compatible = "gpio-leds";
> pinctrl-names = "default";
> @@ -183,11 +231,101 @@
> pinctrl-0 = <&pinctrl_i2c1>;
> status = "okay";
>
> - pca9555: gpio@23 {
> + gsc: gsc@20 {
> + compatible = "gw,gsc";
> + reg = <0x20>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + #size-cells = <0>;
> +
> + adc {
> + compatible = "gw,gsc-adc";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + channel@0 {
> + gw,mode = <0>;
> + reg = <0x00>;
> + label = "temp";
> + };
> +
> + channel@2 {
> + gw,mode = <1>;
> + reg = <0x02>;
> + label = "vdd_vin";
> + };
> +
> + channel@5 {
> + gw,mode = <1>;
> + reg = <0x05>;
> + label = "vdd_3p3";
> + };
> +
> + channel@8 {
> + gw,mode = <1>;
> + reg = <0x08>;
> + label = "vdd_bat";
> + };
> +
> + channel@b {
> + gw,mode = <1>;
> + reg = <0x0b>;
> + label = "vdd_5p0";
> + };
> +
> + channel@e {
> + gw,mode = <1>;
> + reg = <0xe>;
> + label = "vdd_arm";
> + };
> +
> + channel@11 {
> + gw,mode = <1>;
> + reg = <0x11>;
> + label = "vdd_soc";
> + };
> +
> + channel@14 {
> + gw,mode = <1>;
> + reg = <0x14>;
> + label = "vdd_3p0";
> + };
> +
> + channel@17 {
> + gw,mode = <1>;
> + reg = <0x17>;
> + label = "vdd_1p5";
> + };
> +
> + channel@1d {
> + gw,mode = <1>;
> + reg = <0x1d>;
> + label = "vdd_1p8";
> + };
> +
> + channel@20 {
> + gw,mode = <1>;
> + reg = <0x20>;
> + label = "vdd_an1";
> + };
> +
> + channel@23 {
> + gw,mode = <1>;
> + reg = <0x23>;
> + label = "vdd_2p5";
> + };
> + };
> + };
> +
> + gsc_gpio: pca9555@23 {
> compatible = "nxp,pca9555";
> reg = <0x23>;
> gpio-controller;
> #gpio-cells = <2>;
> + interrupt-parent = <&gsc>;
> + interrupts = <4>;
> };
>
> eeprom1: eeprom@50 {
> diff --git a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
> index 76d6cf5..7eba6ed 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
> @@ -46,6 +46,7 @@
> */
>
> #include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/linux-event-codes.h>
>
> / {
> /* these are used by bootloader for disabling nodes */
> @@ -68,6 +69,53 @@
> default-brightness-level = <7>;
> };
>
> + gpio_keys {
> + compatible = "gpio-keys";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + user_pb {
> + label = "user_pb";
> + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
> + linux,code = <BTN_0>;
> + };
> +
> + user_pb1x {
> + label = "user_pb1x";
> + linux,code = <BTN_1>;
> + interrupt-parent = <&gsc>;
> + interrupts = <0>;
> + };
> +
> + key_erased {
> + label = "key-erased";
> + linux,code = <BTN_2>;
> + interrupt-parent = <&gsc>;
> + interrupts = <1>;
> + };
> +
> + eeprom_wp {
> + label = "eeprom_wp";
> + linux,code = <BTN_3>;
> + interrupt-parent = <&gsc>;
> + interrupts = <2>;
> + };
> +
> + tamper {
> + label = "tamper";
> + linux,code = <BTN_4>;
> + interrupt-parent = <&gsc>;
> + interrupts = <5>;
> + };
> +
> + switch_hold {
> + label = "switch_hold";
> + linux,code = <BTN_5>;
> + interrupt-parent = <&gsc>;
> + interrupts = <7>;
> + };
> + };
> +
> leds {
> compatible = "gpio-leds";
> pinctrl-names = "default";
> @@ -205,11 +253,101 @@
> pinctrl-0 = <&pinctrl_i2c1>;
> status = "okay";
>
> - pca9555: gpio@23 {
> + gsc: gsc@20 {
> + compatible = "gw,gsc";
> + reg = <0x20>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + #size-cells = <0>;
> +
> + adc {
> + compatible = "gw,gsc-adc";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + channel@0 {
> + gw,mode = <0>;
> + reg = <0x00>;
> + label = "temp";
> + };
> +
> + channel@2 {
> + gw,mode = <1>;
> + reg = <0x02>;
> + label = "vdd_vin";
> + };
> +
> + channel@5 {
> + gw,mode = <1>;
> + reg = <0x05>;
> + label = "vdd_3p3";
> + };
> +
> + channel@8 {
> + gw,mode = <1>;
> + reg = <0x08>;
> + label = "vdd_bat";
> + };
> +
> + channel@b {
> + gw,mode = <1>;
> + reg = <0x0b>;
> + label = "vdd_5p0";
> + };
> +
> + channel@e {
> + gw,mode = <1>;
> + reg = <0xe>;
> + label = "vdd_arm";
> + };
> +
> + channel@11 {
> + gw,mode = <1>;
> + reg = <0x11>;
> + label = "vdd_soc";
> + };
> +
> + channel@14 {
> + gw,mode = <1>;
> + reg = <0x14>;
> + label = "vdd_3p0";
> + };
> +
> + channel@17 {
> + gw,mode = <1>;
> + reg = <0x17>;
> + label = "vdd_1p5";
> + };
> +
> + channel@1d {
> + gw,mode = <1>;
> + reg = <0x1d>;
> + label = "vdd_1p8";
> + };
> +
> + channel@20 {
> + gw,mode = <1>;
> + reg = <0x20>;
> + label = "vdd_an1";
> + };
> +
> + channel@23 {
> + gw,mode = <1>;
> + reg = <0x23>;
> + label = "vdd_2p5";
> + };
> + };
> + };
> +
> + gsc_gpio: pca9555@23 {
> compatible = "nxp,pca9555";
> reg = <0x23>;
> gpio-controller;
> #gpio-cells = <2>;
> + interrupt-parent = <&gsc>;
> + interrupts = <4>;
> };
>
> eeprom1: eeprom@50 {
> @@ -503,6 +641,7 @@
> fsl,pins = <
> MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
> MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
> + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 /* GSC_IRQ# */
> >;
> };
>
> diff --git a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
> index 0bdebdd..0e155fb 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
> @@ -4,6 +4,7 @@
> */
>
> #include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/linux-event-codes.h>
>
> / {
> /* these are used by bootloader for disabling nodes */
> @@ -19,6 +20,53 @@
> stdout-path = &uart2;
> };
>
> + gpio_keys {
> + compatible = "gpio-keys";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + user_pb {
> + label = "user_pb";
> + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
> + linux,code = <BTN_0>;
> + };
> +
> + user_pb1x {
> + label = "user_pb1x";
> + linux,code = <BTN_1>;
> + interrupt-parent = <&gsc>;
> + interrupts = <0>;
> + };
> +
> + key_erased {
> + label = "key-erased";
> + linux,code = <BTN_2>;
> + interrupt-parent = <&gsc>;
> + interrupts = <1>;
> + };
> +
> + eeprom_wp {
> + label = "eeprom_wp";
> + linux,code = <BTN_3>;
> + interrupt-parent = <&gsc>;
> + interrupts = <2>;
> + };
> +
> + tamper {
> + label = "tamper";
> + linux,code = <BTN_4>;
> + interrupt-parent = <&gsc>;
> + interrupts = <5>;
> + };
> +
> + switch_hold {
> + label = "switch_hold";
> + linux,code = <BTN_5>;
> + interrupt-parent = <&gsc>;
> + interrupts = <7>;
> + };
> + };
> +
> leds {
> compatible = "gpio-leds";
> pinctrl-names = "default";
> @@ -102,11 +150,101 @@
> pinctrl-0 = <&pinctrl_i2c1>;
> status = "okay";
>
> - gpio@23 {
> + gsc: gsc@20 {
> + compatible = "gw,gsc";
> + reg = <0x20>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + #size-cells = <0>;
> +
> + adc {
> + compatible = "gw,gsc-adc";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + channel@0 {
> + gw,mode = <0>;
> + reg = <0x00>;
> + label = "temp";
> + };
> +
> + channel@2 {
> + gw,mode = <1>;
> + reg = <0x02>;
> + label = "vdd_vin";
> + };
> +
> + channel@5 {
> + gw,mode = <1>;
> + reg = <0x05>;
> + label = "vdd_3p3";
> + };
> +
> + channel@8 {
> + gw,mode = <1>;
> + reg = <0x08>;
> + label = "vdd_bat";
> + };
> +
> + channel@b {
> + gw,mode = <1>;
> + reg = <0x0b>;
> + label = "vdd_5p0";
> + };
> +
> + channel@e {
> + gw,mode = <1>;
> + reg = <0xe>;
> + label = "vdd_arm";
> + };
> +
> + channel@11 {
> + gw,mode = <1>;
> + reg = <0x11>;
> + label = "vdd_soc";
> + };
> +
> + channel@14 {
> + gw,mode = <1>;
> + reg = <0x14>;
> + label = "vdd_3p0";
> + };
> +
> + channel@17 {
> + gw,mode = <1>;
> + reg = <0x17>;
> + label = "vdd_1p5";
> + };
> +
> + channel@1d {
> + gw,mode = <1>;
> + reg = <0x1d>;
> + label = "vdd_1p8";
> + };
> +
> + channel@20 {
> + gw,mode = <1>;
> + reg = <0x20>;
> + label = "vdd_an1";
> + };
> +
> + channel@23 {
> + gw,mode = <1>;
> + reg = <0x23>;
> + label = "vdd_2p5";
> + };
> + };
> + };
> +
> + gsc_gpio: pca9555@23 {
> compatible = "nxp,pca9555";
> reg = <0x23>;
> gpio-controller;
> #gpio-cells = <2>;
> + interrupt-parent = <&gsc>;
> + interrupts = <4>;
> };
>
> eeprom@50 {
> @@ -133,7 +271,7 @@
> pagesize = <16>;
> };
>
> - rtc@68 {
> + ds1672@68 {
> compatible = "dallas,ds1672";
> reg = <0x68>;
> };
> diff --git a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
> index 0857de5..7571eb1 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
> @@ -4,6 +4,7 @@
> */
>
> #include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/linux-event-codes.h>
>
> / {
> /* these are used by bootloader for disabling nodes */
> @@ -22,6 +23,53 @@
> reg = <0x10000000 0x20000000>;
> };
>
> + gpio_keys {
> + compatible = "gpio-keys";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + user_pb {
> + label = "user_pb";
> + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
> + linux,code = <BTN_0>;
> + };
> +
> + user_pb1x {
> + label = "user_pb1x";
> + linux,code = <BTN_1>;
> + interrupt-parent = <&gsc>;
> + interrupts = <0>;
> + };
> +
> + key_erased {
> + label = "key-erased";
> + linux,code = <BTN_2>;
> + interrupt-parent = <&gsc>;
> + interrupts = <1>;
> + };
> +
> + eeprom_wp {
> + label = "eeprom_wp";
> + linux,code = <BTN_3>;
> + interrupt-parent = <&gsc>;
> + interrupts = <2>;
> + };
> +
> + tamper {
> + label = "tamper";
> + linux,code = <BTN_4>;
> + interrupt-parent = <&gsc>;
> + interrupts = <5>;
> + };
> +
> + switch_hold {
> + label = "switch_hold";
> + linux,code = <BTN_5>;
> + interrupt-parent = <&gsc>;
> + interrupts = <7>;
> + };
> + };
> +
> leds {
> compatible = "gpio-leds";
> pinctrl-names = "default";
> @@ -111,11 +159,121 @@
> pinctrl-0 = <&pinctrl_i2c1>;
> status = "okay";
>
> - gpio@23 {
> + gsc: gsc@20 {
> + compatible = "gw,gsc";
> + reg = <0x20>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + #size-cells = <0>;
> +
> + adc {
> + compatible = "gw,gsc-adc";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + channel@6 {
> + gw,mode = <0>;
> + reg = <0x06>;
> + label = "temp";
> + };
> +
> + channel@8 {
> + gw,mode = <3>;
> + reg = <0x08>;
> + label = "vdd_bat";
> + };
> +
> + channel@82 {
> + gw,mode = <2>;
> + reg = <0x82>;
> + label = "vdd_vin";
> + gw,voltage-divider-ohms = <22100 1000>;
> + gw,voltage-offset-microvolt = <800000>;
> + };
> +
> + channel@84 {
> + gw,mode = <2>;
> + reg = <0x84>;
> + label = "vdd_5p0";
> + gw,voltage-divider-ohms = <22100 10000>;
> + };
> +
> + channel@86 {
> + gw,mode = <2>;
> + reg = <0x86>;
> + label = "vdd_3p3";
> + gw,voltage-divider-ohms = <10000 10000>;
> + };
> +
> + channel@88 {
> + gw,mode = <2>;
> + reg = <0x88>;
> + label = "vdd_2p5";
> + gw,voltage-divider-ohms = <10000 10000>;
> + };
> +
> + channel@8c {
> + gw,mode = <2>;
> + reg = <0x8c>;
> + label = "vdd_3p0";
> + };
> +
> + channel@8e {
> + gw,mode = <2>;
> + reg = <0x8e>;
> + label = "vdd_arm";
> + };
> +
> + channel@90 {
> + gw,mode = <2>;
> + reg = <0x90>;
> + label = "vdd_soc";
> + };
> +
> + channel@92 {
> + gw,mode = <2>;
> + reg = <0x92>;
> + label = "vdd_1p5";
> + };
> +
> + channel@98 {
> + gw,mode = <2>;
> + reg = <0x98>;
> + label = "vdd_1p8";
> + };
> +
> + channel@9a {
> + gw,mode = <2>;
> + reg = <0x9a>;
> + label = "vdd_1p0";
> + gw,voltage-divider-ohms = <10000 10000>;
> + };
> +
> + channel@9c {
> + gw,mode = <2>;
> + reg = <0x9c>;
> + label = "vdd_an1";
> + gw,voltage-divider-ohms = <10000 10000>;
> + };
> +
> + channel@a2 {
> + gw,mode = <2>;
> + reg = <0xa2>;
> + label = "vdd_gsc";
> + gw,voltage-divider-ohms = <10000 10000>;
> + };
> + };
> + };
> +
> + gsc_gpio: pca9555@23 {
> compatible = "nxp,pca9555";
> reg = <0x23>;
> gpio-controller;
> #gpio-cells = <2>;
> + interrupt-parent = <&gsc>;
> + interrupts = <4>;
> };
>
> eeprom@50 {
> diff --git a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
> index 8c57fd2..e87870f 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
> @@ -4,6 +4,7 @@
> */
>
> #include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/linux-event-codes.h>
>
> / {
> /* these are used by bootloader for disabling nodes */
> @@ -20,6 +21,53 @@
> stdout-path = &uart2;
> };
>
> + gpio_keys {
> + compatible = "gpio-keys";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + user_pb {
> + label = "user_pb";
> + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
> + linux,code = <BTN_0>;
> + };
> +
> + user_pb1x {
> + label = "user_pb1x";
> + linux,code = <BTN_1>;
> + interrupt-parent = <&gsc>;
> + interrupts = <0>;
> + };
> +
> + key_erased {
> + label = "key-erased";
> + linux,code = <BTN_2>;
> + interrupt-parent = <&gsc>;
> + interrupts = <1>;
> + };
> +
> + eeprom_wp {
> + label = "eeprom_wp";
> + linux,code = <BTN_3>;
> + interrupt-parent = <&gsc>;
> + interrupts = <2>;
> + };
> +
> + tamper {
> + label = "tamper";
> + linux,code = <BTN_4>;
> + interrupt-parent = <&gsc>;
> + interrupts = <5>;
> + };
> +
> + switch_hold {
> + label = "switch_hold";
> + linux,code = <BTN_5>;
> + interrupt-parent = <&gsc>;
> + interrupts = <7>;
> + };
> + };
> +
> leds {
> compatible = "gpio-leds";
> pinctrl-names = "default";
> @@ -106,11 +154,108 @@
> pinctrl-0 = <&pinctrl_i2c1>;
> status = "okay";
>
> - gpio@23 {
> + gsc: gsc@20 {
> + compatible = "gw,gsc";
> + reg = <0x20>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + #size-cells = <0>;
> +
> + adc {
> + compatible = "gw,gsc-adc";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + channel@0 {
> + gw,mode = <0>;
> + reg = <0x00>;
> + label = "temp";
> + };
> +
> + channel@2 {
> + gw,mode = <1>;
> + reg = <0x02>;
> + label = "vdd_vin";
> + };
> +
> + channel@5 {
> + gw,mode = <1>;
> + reg = <0x05>;
> + label = "vdd_3p3";
> + };
> +
> + channel@8 {
> + gw,mode = <1>;
> + reg = <0x08>;
> + label = "vdd_bat";
> + };
> +
> + channel@b {
> + gw,mode = <1>;
> + reg = <0x0b>;
> + label = "vdd_5p0";
> + };
> +
> + channel@e {
> + gw,mode = <1>;
> + reg = <0xe>;
> + label = "vdd_arm";
> + };
> +
> + channel@11 {
> + gw,mode = <1>;
> + reg = <0x11>;
> + label = "vdd_soc";
> + };
> +
> + channel@14 {
> + gw,mode = <1>;
> + reg = <0x14>;
> + label = "vdd_3p0";
> + };
> +
> + channel@17 {
> + gw,mode = <1>;
> + reg = <0x17>;
> + label = "vdd_1p5";
> + };
> +
> + channel@1d {
> + gw,mode = <1>;
> + reg = <0x1d>;
> + label = "vdd_1p8";
> + };
> +
> + channel@20 {
> + gw,mode = <1>;
> + reg = <0x20>;
> + label = "vdd_1p0";
> + };
> +
> + channel@23 {
> + gw,mode = <1>;
> + reg = <0x23>;
> + label = "vdd_2p5";
> + };
> + };
> +
> + fan-controller@a {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "gw,gsc-fan";
> + reg = <0x0a>;
> + };
> + };
> +
> + gsc_gpio: pca9555@23 {
> compatible = "nxp,pca9555";
> reg = <0x23>;
> gpio-controller;
> #gpio-cells = <2>;
> + interrupt-parent = <&gsc>;
> + interrupts = <4>;
> };
>
> eeprom@50 {
> diff --git a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
> index 635c203..8ad2d77 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
> @@ -4,6 +4,7 @@
> */
>
> #include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/linux-event-codes.h>
>
> / {
> /* these are used by bootloader for disabling nodes */
> @@ -19,6 +20,53 @@
> stdout-path = &uart2;
> };
>
> + gpio_keys {
> + compatible = "gpio-keys";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + user_pb {
> + label = "user_pb";
> + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
> + linux,code = <BTN_0>;
> + };
> +
> + user_pb1x {
> + label = "user_pb1x";
> + linux,code = <BTN_1>;
> + interrupt-parent = <&gsc>;
> + interrupts = <0>;
> + };
> +
> + key_erased {
> + label = "key-erased";
> + linux,code = <BTN_2>;
> + interrupt-parent = <&gsc>;
> + interrupts = <1>;
> + };
> +
> + eeprom_wp {
> + label = "eeprom_wp";
> + linux,code = <BTN_3>;
> + interrupt-parent = <&gsc>;
> + interrupts = <2>;
> + };
> +
> + tamper {
> + label = "tamper";
> + linux,code = <BTN_4>;
> + interrupt-parent = <&gsc>;
> + interrupts = <5>;
> + };
> +
> + switch_hold {
> + label = "switch_hold";
> + linux,code = <BTN_5>;
> + interrupt-parent = <&gsc>;
> + interrupts = <7>;
> + };
> + };
> +
> leds {
> compatible = "gpio-leds";
> pinctrl-names = "default";
> @@ -87,11 +135,114 @@
> pinctrl-0 = <&pinctrl_i2c1>;
> status = "okay";
>
> - gpio@23 {
> + gsc: gsc@20 {
> + compatible = "gw,gsc";
> + reg = <0x20>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + #size-cells = <0>;
> +
> + adc {
> + compatible = "gw,gsc-adc";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + channel@6 {
> + gw,mode = <0>;
> + reg = <0x06>;
> + label = "temp";
> + };
> +
> + channel@8 {
> + gw,mode = <3>;
> + reg = <0x08>;
> + label = "vdd_bat";
> + };
> +
> + channel@82 {
> + gw,mode = <2>;
> + reg = <0x82>;
> + label = "vdd_vin";
> + gw,voltage-divider-ohms = <22100 1000>;
> + gw,voltage-offset-microvolt = <800000>;
> + };
> +
> + channel@84 {
> + gw,mode = <2>;
> + reg = <0x84>;
> + label = "vdd_5p0";
> + gw,voltage-divider-ohms = <22100 10000>;
> + };
> +
> + channel@86 {
> + gw,mode = <2>;
> + reg = <0x86>;
> + label = "vdd_3p3";
> + gw,voltage-divider-ohms = <10000 10000>;
> + };
> +
> + channel@88 {
> + gw,mode = <2>;
> + reg = <0x88>;
> + label = "vdd_2p5";
> + gw,voltage-divider-ohms = <10000 10000>;
> + };
> +
> + channel@8c {
> + gw,mode = <2>;
> + reg = <0x8c>;
> + label = "vdd_arm";
> + };
> +
> + channel@8e {
> + gw,mode = <2>;
> + reg = <0x8e>;
> + label = "vdd_soc";
> + };
> +
> + channel@90 {
> + gw,mode = <2>;
> + reg = <0x90>;
> + label = "vdd_1p5";
> + };
> +
> + channel@92 {
> + gw,mode = <2>;
> + reg = <0x92>;
> + label = "vdd_1p0";
> + };
> +
> + channel@98 {
> + gw,mode = <2>;
> + reg = <0x98>;
> + label = "vdd_3p0";
> + };
> +
> + channel@9a {
> + gw,mode = <2>;
> + reg = <0x9a>;
> + label = "vdd_an1";
> + gw,voltage-divider-ohms = <10000 10000>;
> + };
> +
> + channel@a2 {
> + gw,mode = <2>;
> + reg = <0xa2>;
> + label = "vdd_gsc";
> + gw,voltage-divider-ohms = <10000 10000>;
> + };
> + };
> + };
> +
> + gsc_gpio: pca9555@23 {
> compatible = "nxp,pca9555";
> reg = <0x23>;
> gpio-controller;
> #gpio-cells = <2>;
> + interrupt-parent = <&gsc>;
> + interrupts = <4>;
> };
>
> eeprom@50 {
> --
> 2.7.4
>
^ permalink raw reply [flat|nested] 17+ messages in thread* [PATCH v3] ARM: dts: imx6qdl-gw: add Gateworks System Controller support
2020-06-18 16:19 ` Tim Harvey
@ 2020-06-23 18:35 ` Tim Harvey
-1 siblings, 0 replies; 17+ messages in thread
From: Tim Harvey @ 2020-06-23 18:35 UTC (permalink / raw)
To: Rob Herring, Shawn Guo, Sascha Hauer, Pengutronix Kernel Team,
Fabio Estevam, NXP Linux Team
Cc: devicetree, linux-arm-kernel, linux-kernel, Tim Harvey
Add Gateworks System Controller support to Gateworks Ventana boards:
- add dt bindings for GSC mfd driver and hwmon driver for ADC's and
fan controllers.
- add dt bindings for gpio-keys driver for push-button and interrupt events
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
v3:
- change underscore to hyphen in node names
- use generic node name for gsc_gpio nodes
v2:
- use keycode bindings from linux-event-codes.h
- fix gw5910 vdd_bat adc mode
- fix gw5913 vdd_bat adc mode
---
arch/arm/boot/dts/imx6qdl-gw51xx.dtsi | 153 +++++++++++++++++++++++++++++--
arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 159 ++++++++++++++++++++++++++++++--
arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 165 +++++++++++++++++++++++++++++++--
arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 167 ++++++++++++++++++++++++++++++++--
arch/arm/boot/dts/imx6qdl-gw551x.dtsi | 147 ++++++++++++++++++++++++++++--
arch/arm/boot/dts/imx6qdl-gw552x.dtsi | 153 +++++++++++++++++++++++++++++--
arch/arm/boot/dts/imx6qdl-gw553x.dtsi | 141 +++++++++++++++++++++++++++-
arch/arm/boot/dts/imx6qdl-gw560x.dtsi | 164 +++++++++++++++++++++++++++++++--
arch/arm/boot/dts/imx6qdl-gw5903.dtsi | 140 +++++++++++++++++++++++++++-
arch/arm/boot/dts/imx6qdl-gw5904.dtsi | 141 +++++++++++++++++++++++++++-
arch/arm/boot/dts/imx6qdl-gw5907.dtsi | 142 ++++++++++++++++++++++++++++-
arch/arm/boot/dts/imx6qdl-gw5910.dtsi | 160 +++++++++++++++++++++++++++++++-
arch/arm/boot/dts/imx6qdl-gw5912.dtsi | 147 +++++++++++++++++++++++++++++-
arch/arm/boot/dts/imx6qdl-gw5913.dtsi | 153 ++++++++++++++++++++++++++++++-
14 files changed, 2075 insertions(+), 57 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
index 419a7cd..7705285 100644
--- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -19,6 +20,53 @@
bootargs = "console=ttymxc1,115200";
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -102,6 +150,103 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_an1";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
+ };
+
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
@@ -126,13 +271,6 @@
pagesize = <16>;
};
- gpio: pca9555@23 {
- compatible = "nxp,pca9555";
- reg = <0x23>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
rtc: ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
@@ -387,6 +525,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 /* GSC_IRQ# */
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index 60563ff..9e5bec1 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -28,6 +29,53 @@
default-brightness-level = <7>;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -165,6 +213,109 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_1p0";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+
+ channel@29 {
+ gw,mode = <1>;
+ reg = <0x29>;
+ label = "vdd_an1";
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
+ };
+
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
@@ -189,13 +340,6 @@
pagesize = <16>;
};
- gpio: pca9555@23 {
- compatible = "nxp,pca9555";
- reg = <0x23>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
rtc: ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
@@ -504,6 +648,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index 8942bec..7ea4fdd 100644
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -28,6 +29,53 @@
default-brightness-level = <7>;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -158,6 +206,115 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_1p0";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+
+ channel@26 {
+ gw,mode = <1>;
+ reg = <0x26>;
+ label = "vdd_gps";
+ };
+
+ channel@29 {
+ gw,mode = <1>;
+ reg = <0x29>;
+ label = "vdd_an1";
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
+ };
+
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
@@ -182,13 +339,6 @@
pagesize = <16>;
};
- gpio: pca9555@23 {
- compatible = "nxp,pca9555";
- reg = <0x23>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
rtc: ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
@@ -486,6 +636,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index c40583d..0c19759 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/sound/fsl-imx-audmux.h>
/ {
@@ -29,6 +30,53 @@
default-brightness-level = <7>;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -195,6 +243,117 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_1p0";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+
+ channel@26 {
+ gw,mode = <1>;
+ reg = <0x26>;
+ label = "vdd_gps";
+ };
+ };
+
+ fan-controller@2c {
+ compatible = "gw,gsc-fan";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2c>;
+ };
+ };
+
+ gsc_gpio: gpio@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
+ };
+
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
@@ -219,13 +378,6 @@
pagesize = <16>;
};
- gpio: pca9555@23 {
- compatible = "nxp,pca9555";
- reg = <0x23>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
rtc: ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
@@ -571,6 +723,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
index 8c33510..1516e2b 100644
--- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
@@ -47,6 +47,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/media/tda1997x.h>
+#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/sound/fsl-imx-audmux.h>
/ {
@@ -63,6 +64,53 @@
bootargs = "console=ttymxc1,115200";
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -167,6 +215,97 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8a";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_1p0b";
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
+ };
+
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
@@ -191,13 +330,6 @@
pagesize = <16>;
};
- gpio: pca9555@23 {
- compatible = "nxp,pca9555";
- reg = <0x23>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
rtc: ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
@@ -464,6 +596,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
index dc646b7..3cb568d 100644
--- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -20,6 +21,53 @@
bootargs = "console=ttymxc1,115200";
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -92,6 +140,103 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_1p0";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
+ };
+
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
@@ -116,13 +261,6 @@
pagesize = <16>;
};
- gpio: pca9555@23 {
- compatible = "nxp,pca9555";
- reg = <0x23>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
rtc: ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
@@ -297,6 +435,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
index ee85031..db30de5 100644
--- a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
@@ -46,6 +46,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -61,6 +62,53 @@
stdout-path = &uart2;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -130,11 +178,101 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- gpio: pca9555@23 {
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8a";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_1p0b";
+ };
+
+ channel@26 {
+ gw,mode = <1>;
+ reg = <0x26>;
+ label = "vdd_an1";
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
};
eeprom1: eeprom@50 {
@@ -428,6 +566,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
index e8e36df..1871331 100644
--- a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
@@ -88,6 +88,53 @@
default-on;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -243,6 +290,115 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_an1";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+
+ channel@26 {
+ gw,mode = <1>;
+ reg = <0x26>;
+ label = "vdd_gps";
+ };
+
+ channel@29 {
+ gw,mode = <1>;
+ reg = <0x29>;
+ label = "vdd_an2";
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
+ };
+
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
@@ -267,13 +423,6 @@
pagesize = <16>;
};
- pca9555: gpio@23 {
- compatible = "nxp,pca9555";
- reg = <0x23>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
ds1672: rtc@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
@@ -589,6 +738,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
index aee9221..0461085 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
@@ -46,6 +46,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
chosen {
@@ -71,6 +72,53 @@
default-brightness-level = <100>;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -183,11 +231,101 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- pca9555: gpio@23 {
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_an1";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
};
eeprom1: eeprom@50 {
diff --git a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
index 6d21cc6..8b2fe2f 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
@@ -46,6 +46,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -68,6 +69,53 @@
default-brightness-level = <7>;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -205,11 +253,101 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- pca9555: gpio@23 {
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_an1";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
};
eeprom1: eeprom@50 {
@@ -484,6 +622,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 /* GSC_IRQ# */
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
index 0bdebdd..b1ff7c8 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -19,6 +20,53 @@
stdout-path = &uart2;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -102,11 +150,101 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- gpio@23 {
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_an1";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
};
eeprom@50 {
@@ -133,7 +271,7 @@
pagesize = <16>;
};
- rtc@68 {
+ ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
index 30fe47f..4bcd5b7 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -22,6 +23,53 @@
reg = <0x10000000 0x20000000>;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -125,11 +173,121 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- gpio@23 {
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@6 {
+ gw,mode = <0>;
+ reg = <0x06>;
+ label = "temp";
+ };
+
+ channel@8 {
+ gw,mode = <3>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@82 {
+ gw,mode = <2>;
+ reg = <0x82>;
+ label = "vdd_vin";
+ gw,voltage-divider-ohms = <22100 1000>;
+ gw,voltage-offset-microvolt = <800000>;
+ };
+
+ channel@84 {
+ gw,mode = <2>;
+ reg = <0x84>;
+ label = "vdd_5p0";
+ gw,voltage-divider-ohms = <22100 10000>;
+ };
+
+ channel@86 {
+ gw,mode = <2>;
+ reg = <0x86>;
+ label = "vdd_3p3";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@88 {
+ gw,mode = <2>;
+ reg = <0x88>;
+ label = "vdd_2p5";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@8c {
+ gw,mode = <2>;
+ reg = <0x8c>;
+ label = "vdd_3p0";
+ };
+
+ channel@8e {
+ gw,mode = <2>;
+ reg = <0x8e>;
+ label = "vdd_arm";
+ };
+
+ channel@90 {
+ gw,mode = <2>;
+ reg = <0x90>;
+ label = "vdd_soc";
+ };
+
+ channel@92 {
+ gw,mode = <2>;
+ reg = <0x92>;
+ label = "vdd_1p5";
+ };
+
+ channel@98 {
+ gw,mode = <2>;
+ reg = <0x98>;
+ label = "vdd_1p8";
+ };
+
+ channel@9a {
+ gw,mode = <2>;
+ reg = <0x9a>;
+ label = "vdd_1p0";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@9c {
+ gw,mode = <2>;
+ reg = <0x9c>;
+ label = "vdd_an1";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@a2 {
+ gw,mode = <2>;
+ reg = <0xa2>;
+ label = "vdd_gsc";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
};
eeprom@50 {
diff --git a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
index 8c57fd2..bde4690 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -20,6 +21,53 @@
stdout-path = &uart2;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -106,11 +154,108 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- gpio@23 {
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_1p0";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+ };
+
+ fan-controller@a {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "gw,gsc-fan";
+ reg = <0x0a>;
+ };
+ };
+
+ gsc_gpio: gpio@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
};
eeprom@50 {
diff --git a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
index 635c203..d62a8da 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -19,6 +20,53 @@
stdout-path = &uart2;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -87,11 +135,114 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- gpio@23 {
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@6 {
+ gw,mode = <0>;
+ reg = <0x06>;
+ label = "temp";
+ };
+
+ channel@8 {
+ gw,mode = <3>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@82 {
+ gw,mode = <2>;
+ reg = <0x82>;
+ label = "vdd_vin";
+ gw,voltage-divider-ohms = <22100 1000>;
+ gw,voltage-offset-microvolt = <800000>;
+ };
+
+ channel@84 {
+ gw,mode = <2>;
+ reg = <0x84>;
+ label = "vdd_5p0";
+ gw,voltage-divider-ohms = <22100 10000>;
+ };
+
+ channel@86 {
+ gw,mode = <2>;
+ reg = <0x86>;
+ label = "vdd_3p3";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@88 {
+ gw,mode = <2>;
+ reg = <0x88>;
+ label = "vdd_2p5";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@8c {
+ gw,mode = <2>;
+ reg = <0x8c>;
+ label = "vdd_arm";
+ };
+
+ channel@8e {
+ gw,mode = <2>;
+ reg = <0x8e>;
+ label = "vdd_soc";
+ };
+
+ channel@90 {
+ gw,mode = <2>;
+ reg = <0x90>;
+ label = "vdd_1p5";
+ };
+
+ channel@92 {
+ gw,mode = <2>;
+ reg = <0x92>;
+ label = "vdd_1p0";
+ };
+
+ channel@98 {
+ gw,mode = <2>;
+ reg = <0x98>;
+ label = "vdd_3p0";
+ };
+
+ channel@9a {
+ gw,mode = <2>;
+ reg = <0x9a>;
+ label = "vdd_an1";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@a2 {
+ gw,mode = <2>;
+ reg = <0xa2>;
+ label = "vdd_gsc";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
};
eeprom@50 {
--
2.7.4
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH v3] ARM: dts: imx6qdl-gw: add Gateworks System Controller support
@ 2020-06-23 18:35 ` Tim Harvey
0 siblings, 0 replies; 17+ messages in thread
From: Tim Harvey @ 2020-06-23 18:35 UTC (permalink / raw)
To: Rob Herring, Shawn Guo, Sascha Hauer, Pengutronix Kernel Team,
Fabio Estevam, NXP Linux Team
Cc: devicetree, Tim Harvey, linux-kernel, linux-arm-kernel
Add Gateworks System Controller support to Gateworks Ventana boards:
- add dt bindings for GSC mfd driver and hwmon driver for ADC's and
fan controllers.
- add dt bindings for gpio-keys driver for push-button and interrupt events
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
v3:
- change underscore to hyphen in node names
- use generic node name for gsc_gpio nodes
v2:
- use keycode bindings from linux-event-codes.h
- fix gw5910 vdd_bat adc mode
- fix gw5913 vdd_bat adc mode
---
arch/arm/boot/dts/imx6qdl-gw51xx.dtsi | 153 +++++++++++++++++++++++++++++--
arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 159 ++++++++++++++++++++++++++++++--
arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 165 +++++++++++++++++++++++++++++++--
arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 167 ++++++++++++++++++++++++++++++++--
arch/arm/boot/dts/imx6qdl-gw551x.dtsi | 147 ++++++++++++++++++++++++++++--
arch/arm/boot/dts/imx6qdl-gw552x.dtsi | 153 +++++++++++++++++++++++++++++--
arch/arm/boot/dts/imx6qdl-gw553x.dtsi | 141 +++++++++++++++++++++++++++-
arch/arm/boot/dts/imx6qdl-gw560x.dtsi | 164 +++++++++++++++++++++++++++++++--
arch/arm/boot/dts/imx6qdl-gw5903.dtsi | 140 +++++++++++++++++++++++++++-
arch/arm/boot/dts/imx6qdl-gw5904.dtsi | 141 +++++++++++++++++++++++++++-
arch/arm/boot/dts/imx6qdl-gw5907.dtsi | 142 ++++++++++++++++++++++++++++-
arch/arm/boot/dts/imx6qdl-gw5910.dtsi | 160 +++++++++++++++++++++++++++++++-
arch/arm/boot/dts/imx6qdl-gw5912.dtsi | 147 +++++++++++++++++++++++++++++-
arch/arm/boot/dts/imx6qdl-gw5913.dtsi | 153 ++++++++++++++++++++++++++++++-
14 files changed, 2075 insertions(+), 57 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
index 419a7cd..7705285 100644
--- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -19,6 +20,53 @@
bootargs = "console=ttymxc1,115200";
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -102,6 +150,103 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_an1";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
+ };
+
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
@@ -126,13 +271,6 @@
pagesize = <16>;
};
- gpio: pca9555@23 {
- compatible = "nxp,pca9555";
- reg = <0x23>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
rtc: ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
@@ -387,6 +525,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 /* GSC_IRQ# */
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index 60563ff..9e5bec1 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -28,6 +29,53 @@
default-brightness-level = <7>;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -165,6 +213,109 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_1p0";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+
+ channel@29 {
+ gw,mode = <1>;
+ reg = <0x29>;
+ label = "vdd_an1";
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
+ };
+
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
@@ -189,13 +340,6 @@
pagesize = <16>;
};
- gpio: pca9555@23 {
- compatible = "nxp,pca9555";
- reg = <0x23>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
rtc: ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
@@ -504,6 +648,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index 8942bec..7ea4fdd 100644
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -28,6 +29,53 @@
default-brightness-level = <7>;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -158,6 +206,115 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_1p0";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+
+ channel@26 {
+ gw,mode = <1>;
+ reg = <0x26>;
+ label = "vdd_gps";
+ };
+
+ channel@29 {
+ gw,mode = <1>;
+ reg = <0x29>;
+ label = "vdd_an1";
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
+ };
+
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
@@ -182,13 +339,6 @@
pagesize = <16>;
};
- gpio: pca9555@23 {
- compatible = "nxp,pca9555";
- reg = <0x23>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
rtc: ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
@@ -486,6 +636,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index c40583d..0c19759 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/sound/fsl-imx-audmux.h>
/ {
@@ -29,6 +30,53 @@
default-brightness-level = <7>;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -195,6 +243,117 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_1p0";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+
+ channel@26 {
+ gw,mode = <1>;
+ reg = <0x26>;
+ label = "vdd_gps";
+ };
+ };
+
+ fan-controller@2c {
+ compatible = "gw,gsc-fan";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2c>;
+ };
+ };
+
+ gsc_gpio: gpio@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
+ };
+
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
@@ -219,13 +378,6 @@
pagesize = <16>;
};
- gpio: pca9555@23 {
- compatible = "nxp,pca9555";
- reg = <0x23>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
rtc: ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
@@ -571,6 +723,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
index 8c33510..1516e2b 100644
--- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
@@ -47,6 +47,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/media/tda1997x.h>
+#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/sound/fsl-imx-audmux.h>
/ {
@@ -63,6 +64,53 @@
bootargs = "console=ttymxc1,115200";
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -167,6 +215,97 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8a";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_1p0b";
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
+ };
+
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
@@ -191,13 +330,6 @@
pagesize = <16>;
};
- gpio: pca9555@23 {
- compatible = "nxp,pca9555";
- reg = <0x23>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
rtc: ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
@@ -464,6 +596,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
index dc646b7..3cb568d 100644
--- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -20,6 +21,53 @@
bootargs = "console=ttymxc1,115200";
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -92,6 +140,103 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_1p0";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
+ };
+
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
@@ -116,13 +261,6 @@
pagesize = <16>;
};
- gpio: pca9555@23 {
- compatible = "nxp,pca9555";
- reg = <0x23>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
rtc: ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
@@ -297,6 +435,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
index ee85031..db30de5 100644
--- a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
@@ -46,6 +46,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -61,6 +62,53 @@
stdout-path = &uart2;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -130,11 +178,101 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- gpio: pca9555@23 {
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8a";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_1p0b";
+ };
+
+ channel@26 {
+ gw,mode = <1>;
+ reg = <0x26>;
+ label = "vdd_an1";
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
};
eeprom1: eeprom@50 {
@@ -428,6 +566,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
index e8e36df..1871331 100644
--- a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
@@ -88,6 +88,53 @@
default-on;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -243,6 +290,115 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_an1";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+
+ channel@26 {
+ gw,mode = <1>;
+ reg = <0x26>;
+ label = "vdd_gps";
+ };
+
+ channel@29 {
+ gw,mode = <1>;
+ reg = <0x29>;
+ label = "vdd_an2";
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
+ };
+
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
@@ -267,13 +423,6 @@
pagesize = <16>;
};
- pca9555: gpio@23 {
- compatible = "nxp,pca9555";
- reg = <0x23>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
ds1672: rtc@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
@@ -589,6 +738,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
index aee9221..0461085 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
@@ -46,6 +46,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
chosen {
@@ -71,6 +72,53 @@
default-brightness-level = <100>;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -183,11 +231,101 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- pca9555: gpio@23 {
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_an1";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
};
eeprom1: eeprom@50 {
diff --git a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
index 6d21cc6..8b2fe2f 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
@@ -46,6 +46,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -68,6 +69,53 @@
default-brightness-level = <7>;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -205,11 +253,101 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- pca9555: gpio@23 {
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_an1";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
};
eeprom1: eeprom@50 {
@@ -484,6 +622,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 /* GSC_IRQ# */
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
index 0bdebdd..b1ff7c8 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -19,6 +20,53 @@
stdout-path = &uart2;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -102,11 +150,101 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- gpio@23 {
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_an1";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
};
eeprom@50 {
@@ -133,7 +271,7 @@
pagesize = <16>;
};
- rtc@68 {
+ ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
index 30fe47f..4bcd5b7 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -22,6 +23,53 @@
reg = <0x10000000 0x20000000>;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -125,11 +173,121 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- gpio@23 {
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@6 {
+ gw,mode = <0>;
+ reg = <0x06>;
+ label = "temp";
+ };
+
+ channel@8 {
+ gw,mode = <3>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@82 {
+ gw,mode = <2>;
+ reg = <0x82>;
+ label = "vdd_vin";
+ gw,voltage-divider-ohms = <22100 1000>;
+ gw,voltage-offset-microvolt = <800000>;
+ };
+
+ channel@84 {
+ gw,mode = <2>;
+ reg = <0x84>;
+ label = "vdd_5p0";
+ gw,voltage-divider-ohms = <22100 10000>;
+ };
+
+ channel@86 {
+ gw,mode = <2>;
+ reg = <0x86>;
+ label = "vdd_3p3";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@88 {
+ gw,mode = <2>;
+ reg = <0x88>;
+ label = "vdd_2p5";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@8c {
+ gw,mode = <2>;
+ reg = <0x8c>;
+ label = "vdd_3p0";
+ };
+
+ channel@8e {
+ gw,mode = <2>;
+ reg = <0x8e>;
+ label = "vdd_arm";
+ };
+
+ channel@90 {
+ gw,mode = <2>;
+ reg = <0x90>;
+ label = "vdd_soc";
+ };
+
+ channel@92 {
+ gw,mode = <2>;
+ reg = <0x92>;
+ label = "vdd_1p5";
+ };
+
+ channel@98 {
+ gw,mode = <2>;
+ reg = <0x98>;
+ label = "vdd_1p8";
+ };
+
+ channel@9a {
+ gw,mode = <2>;
+ reg = <0x9a>;
+ label = "vdd_1p0";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@9c {
+ gw,mode = <2>;
+ reg = <0x9c>;
+ label = "vdd_an1";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@a2 {
+ gw,mode = <2>;
+ reg = <0xa2>;
+ label = "vdd_gsc";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
};
eeprom@50 {
diff --git a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
index 8c57fd2..bde4690 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -20,6 +21,53 @@
stdout-path = &uart2;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -106,11 +154,108 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- gpio@23 {
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_1p0";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+ };
+
+ fan-controller@a {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "gw,gsc-fan";
+ reg = <0x0a>;
+ };
+ };
+
+ gsc_gpio: gpio@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
};
eeprom@50 {
diff --git a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
index 635c203..d62a8da 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -19,6 +20,53 @@
stdout-path = &uart2;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -87,11 +135,114 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- gpio@23 {
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@6 {
+ gw,mode = <0>;
+ reg = <0x06>;
+ label = "temp";
+ };
+
+ channel@8 {
+ gw,mode = <3>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@82 {
+ gw,mode = <2>;
+ reg = <0x82>;
+ label = "vdd_vin";
+ gw,voltage-divider-ohms = <22100 1000>;
+ gw,voltage-offset-microvolt = <800000>;
+ };
+
+ channel@84 {
+ gw,mode = <2>;
+ reg = <0x84>;
+ label = "vdd_5p0";
+ gw,voltage-divider-ohms = <22100 10000>;
+ };
+
+ channel@86 {
+ gw,mode = <2>;
+ reg = <0x86>;
+ label = "vdd_3p3";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@88 {
+ gw,mode = <2>;
+ reg = <0x88>;
+ label = "vdd_2p5";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@8c {
+ gw,mode = <2>;
+ reg = <0x8c>;
+ label = "vdd_arm";
+ };
+
+ channel@8e {
+ gw,mode = <2>;
+ reg = <0x8e>;
+ label = "vdd_soc";
+ };
+
+ channel@90 {
+ gw,mode = <2>;
+ reg = <0x90>;
+ label = "vdd_1p5";
+ };
+
+ channel@92 {
+ gw,mode = <2>;
+ reg = <0x92>;
+ label = "vdd_1p0";
+ };
+
+ channel@98 {
+ gw,mode = <2>;
+ reg = <0x98>;
+ label = "vdd_3p0";
+ };
+
+ channel@9a {
+ gw,mode = <2>;
+ reg = <0x9a>;
+ label = "vdd_an1";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@a2 {
+ gw,mode = <2>;
+ reg = <0xa2>;
+ label = "vdd_gsc";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
};
eeprom@50 {
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 17+ messages in thread* Re: [PATCH v3] ARM: dts: imx6qdl-gw: add Gateworks System Controller support
2020-06-23 18:35 ` Tim Harvey
@ 2020-07-11 10:42 ` Shawn Guo
-1 siblings, 0 replies; 17+ messages in thread
From: Shawn Guo @ 2020-07-11 10:42 UTC (permalink / raw)
To: Tim Harvey
Cc: Rob Herring, Sascha Hauer, Pengutronix Kernel Team,
Fabio Estevam, NXP Linux Team, devicetree, linux-arm-kernel,
linux-kernel
On Tue, Jun 23, 2020 at 11:35:47AM -0700, Tim Harvey wrote:
> Add Gateworks System Controller support to Gateworks Ventana boards:
> - add dt bindings for GSC mfd driver and hwmon driver for ADC's and
> fan controllers.
> - add dt bindings for gpio-keys driver for push-button and interrupt events
>
> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Applied, thanks.
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH v3] ARM: dts: imx6qdl-gw: add Gateworks System Controller support
@ 2020-07-11 10:42 ` Shawn Guo
0 siblings, 0 replies; 17+ messages in thread
From: Shawn Guo @ 2020-07-11 10:42 UTC (permalink / raw)
To: Tim Harvey
Cc: devicetree, Sascha Hauer, linux-kernel, Rob Herring,
NXP Linux Team, Pengutronix Kernel Team, Fabio Estevam,
linux-arm-kernel
On Tue, Jun 23, 2020 at 11:35:47AM -0700, Tim Harvey wrote:
> Add Gateworks System Controller support to Gateworks Ventana boards:
> - add dt bindings for GSC mfd driver and hwmon driver for ADC's and
> fan controllers.
> - add dt bindings for gpio-keys driver for push-button and interrupt events
>
> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Applied, thanks.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH v3] ARM: dts: imx6qdl-gw: add Gateworks System Controller support
2020-06-23 18:35 ` Tim Harvey
@ 2020-07-13 11:50 ` Shawn Guo
-1 siblings, 0 replies; 17+ messages in thread
From: Shawn Guo @ 2020-07-13 11:50 UTC (permalink / raw)
To: Tim Harvey
Cc: Rob Herring, Sascha Hauer, Pengutronix Kernel Team,
Fabio Estevam, NXP Linux Team, devicetree, linux-arm-kernel,
linux-kernel
On Tue, Jun 23, 2020 at 11:35:47AM -0700, Tim Harvey wrote:
> Add Gateworks System Controller support to Gateworks Ventana boards:
> - add dt bindings for GSC mfd driver and hwmon driver for ADC's and
> fan controllers.
> - add dt bindings for gpio-keys driver for push-button and interrupt events
>
> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
It causes DTC warnings like below.
../arch/arm/boot/dts/imx6qdl-gw5912.dtsi:248.4-17: Warning (reg_format): /soc/bus@2100000/i2c@21a0000/gsc@20/fan-controller@a:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 0)
arch/arm/boot/dts/imx6dl-gw5912.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
arch/arm/boot/dts/imx6dl-gw5912.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
arch/arm/boot/dts/imx6dl-gw5912.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
../arch/arm/boot/dts/imx6qdl-gw5912.dtsi:244.20-249.5: Warning (avoid_default_addr_size): /soc/bus@2100000/i2c@21a0000/gsc@20/fan-controller@a: Relying on default #address-cells value
Patch dropped.
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH v3] ARM: dts: imx6qdl-gw: add Gateworks System Controller support
@ 2020-07-13 11:50 ` Shawn Guo
0 siblings, 0 replies; 17+ messages in thread
From: Shawn Guo @ 2020-07-13 11:50 UTC (permalink / raw)
To: Tim Harvey
Cc: devicetree, Sascha Hauer, linux-kernel, Rob Herring,
NXP Linux Team, Pengutronix Kernel Team, Fabio Estevam,
linux-arm-kernel
On Tue, Jun 23, 2020 at 11:35:47AM -0700, Tim Harvey wrote:
> Add Gateworks System Controller support to Gateworks Ventana boards:
> - add dt bindings for GSC mfd driver and hwmon driver for ADC's and
> fan controllers.
> - add dt bindings for gpio-keys driver for push-button and interrupt events
>
> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
It causes DTC warnings like below.
../arch/arm/boot/dts/imx6qdl-gw5912.dtsi:248.4-17: Warning (reg_format): /soc/bus@2100000/i2c@21a0000/gsc@20/fan-controller@a:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 0)
arch/arm/boot/dts/imx6dl-gw5912.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
arch/arm/boot/dts/imx6dl-gw5912.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
arch/arm/boot/dts/imx6dl-gw5912.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
../arch/arm/boot/dts/imx6qdl-gw5912.dtsi:244.20-249.5: Warning (avoid_default_addr_size): /soc/bus@2100000/i2c@21a0000/gsc@20/fan-controller@a: Relying on default #address-cells value
Patch dropped.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH v4] ARM: dts: imx6qdl-gw: add Gateworks System Controller support
2020-06-18 16:19 ` Tim Harvey
@ 2020-07-16 15:35 ` Tim Harvey
-1 siblings, 0 replies; 17+ messages in thread
From: Tim Harvey @ 2020-07-16 15:35 UTC (permalink / raw)
To: Shawn Guo, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
devicetree, Rob Herring, linux-kernel, rjones
Cc: linux-arm-kernel, Tim Harvey
Add Gateworks System Controller support to Gateworks Ventana boards:
- add dt bindings for GSC mfd driver and hwmon driver for ADC's and
fan controllers.
- add dt bindings for gpio-keys driver for push-button and interrupt events
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
v4:
- add missing #address-cells to gw5912 gsc node to address dtc warning
v3:
- change underscore to hyphen in node names
- use generic node name for gsc_gpio nodes
v2:
- use keycode bindings from linux-event-codes.h
- fix gw5910 vdd_bat adc mode
- fix gw5913 vdd_bat adc mode
---
arch/arm/boot/dts/imx6qdl-gw51xx.dtsi | 153 +++++++++++++++++++++++++++++--
arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 159 ++++++++++++++++++++++++++++++--
arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 165 +++++++++++++++++++++++++++++++--
arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 167 ++++++++++++++++++++++++++++++++--
arch/arm/boot/dts/imx6qdl-gw551x.dtsi | 147 ++++++++++++++++++++++++++++--
arch/arm/boot/dts/imx6qdl-gw552x.dtsi | 153 +++++++++++++++++++++++++++++--
arch/arm/boot/dts/imx6qdl-gw553x.dtsi | 141 +++++++++++++++++++++++++++-
arch/arm/boot/dts/imx6qdl-gw560x.dtsi | 164 +++++++++++++++++++++++++++++++--
arch/arm/boot/dts/imx6qdl-gw5903.dtsi | 140 +++++++++++++++++++++++++++-
arch/arm/boot/dts/imx6qdl-gw5904.dtsi | 141 +++++++++++++++++++++++++++-
arch/arm/boot/dts/imx6qdl-gw5907.dtsi | 142 ++++++++++++++++++++++++++++-
arch/arm/boot/dts/imx6qdl-gw5910.dtsi | 160 +++++++++++++++++++++++++++++++-
arch/arm/boot/dts/imx6qdl-gw5912.dtsi | 148 +++++++++++++++++++++++++++++-
arch/arm/boot/dts/imx6qdl-gw5913.dtsi | 153 ++++++++++++++++++++++++++++++-
14 files changed, 2076 insertions(+), 57 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
index 419a7cd..7705285 100644
--- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -19,6 +20,53 @@
bootargs = "console=ttymxc1,115200";
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -102,6 +150,103 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_an1";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
+ };
+
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
@@ -126,13 +271,6 @@
pagesize = <16>;
};
- gpio: pca9555@23 {
- compatible = "nxp,pca9555";
- reg = <0x23>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
rtc: ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
@@ -387,6 +525,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 /* GSC_IRQ# */
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index 60563ff..9e5bec1 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -28,6 +29,53 @@
default-brightness-level = <7>;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -165,6 +213,109 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_1p0";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+
+ channel@29 {
+ gw,mode = <1>;
+ reg = <0x29>;
+ label = "vdd_an1";
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
+ };
+
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
@@ -189,13 +340,6 @@
pagesize = <16>;
};
- gpio: pca9555@23 {
- compatible = "nxp,pca9555";
- reg = <0x23>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
rtc: ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
@@ -504,6 +648,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index 8942bec..7ea4fdd 100644
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -28,6 +29,53 @@
default-brightness-level = <7>;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -158,6 +206,115 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_1p0";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+
+ channel@26 {
+ gw,mode = <1>;
+ reg = <0x26>;
+ label = "vdd_gps";
+ };
+
+ channel@29 {
+ gw,mode = <1>;
+ reg = <0x29>;
+ label = "vdd_an1";
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
+ };
+
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
@@ -182,13 +339,6 @@
pagesize = <16>;
};
- gpio: pca9555@23 {
- compatible = "nxp,pca9555";
- reg = <0x23>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
rtc: ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
@@ -486,6 +636,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index c40583d..0c19759 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/sound/fsl-imx-audmux.h>
/ {
@@ -29,6 +30,53 @@
default-brightness-level = <7>;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -195,6 +243,117 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_1p0";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+
+ channel@26 {
+ gw,mode = <1>;
+ reg = <0x26>;
+ label = "vdd_gps";
+ };
+ };
+
+ fan-controller@2c {
+ compatible = "gw,gsc-fan";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2c>;
+ };
+ };
+
+ gsc_gpio: gpio@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
+ };
+
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
@@ -219,13 +378,6 @@
pagesize = <16>;
};
- gpio: pca9555@23 {
- compatible = "nxp,pca9555";
- reg = <0x23>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
rtc: ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
@@ -571,6 +723,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
index 8c33510..1516e2b 100644
--- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
@@ -47,6 +47,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/media/tda1997x.h>
+#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/sound/fsl-imx-audmux.h>
/ {
@@ -63,6 +64,53 @@
bootargs = "console=ttymxc1,115200";
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -167,6 +215,97 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8a";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_1p0b";
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
+ };
+
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
@@ -191,13 +330,6 @@
pagesize = <16>;
};
- gpio: pca9555@23 {
- compatible = "nxp,pca9555";
- reg = <0x23>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
rtc: ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
@@ -464,6 +596,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
index bb35971..0da6e6f 100644
--- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -20,6 +21,53 @@
bootargs = "console=ttymxc1,115200";
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -92,6 +140,103 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_1p0";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
+ };
+
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
@@ -116,13 +261,6 @@
pagesize = <16>;
};
- gpio: pca9555@23 {
- compatible = "nxp,pca9555";
- reg = <0x23>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
rtc: ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
@@ -305,6 +443,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
index ee85031..db30de5 100644
--- a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
@@ -46,6 +46,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -61,6 +62,53 @@
stdout-path = &uart2;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -130,11 +178,101 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- gpio: pca9555@23 {
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8a";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_1p0b";
+ };
+
+ channel@26 {
+ gw,mode = <1>;
+ reg = <0x26>;
+ label = "vdd_an1";
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
};
eeprom1: eeprom@50 {
@@ -428,6 +566,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
index 69ca70d..940520f 100644
--- a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
@@ -88,6 +88,53 @@
default-on;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -243,6 +290,115 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_an1";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+
+ channel@26 {
+ gw,mode = <1>;
+ reg = <0x26>;
+ label = "vdd_gps";
+ };
+
+ channel@29 {
+ gw,mode = <1>;
+ reg = <0x29>;
+ label = "vdd_an2";
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
+ };
+
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
@@ -267,13 +423,6 @@
pagesize = <16>;
};
- pca9555: gpio@23 {
- compatible = "nxp,pca9555";
- reg = <0x23>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
ds1672: rtc@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
@@ -608,6 +757,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
index aee9221..0461085 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
@@ -46,6 +46,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
chosen {
@@ -71,6 +72,53 @@
default-brightness-level = <100>;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -183,11 +231,101 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- pca9555: gpio@23 {
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_an1";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
};
eeprom1: eeprom@50 {
diff --git a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
index 76d6cf5..e73090f 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
@@ -46,6 +46,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -68,6 +69,53 @@
default-brightness-level = <7>;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -205,11 +253,101 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- pca9555: gpio@23 {
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_an1";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
};
eeprom1: eeprom@50 {
@@ -503,6 +641,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 /* GSC_IRQ# */
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
index 0bdebdd..b1ff7c8 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -19,6 +20,53 @@
stdout-path = &uart2;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -102,11 +150,101 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- gpio@23 {
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_an1";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
};
eeprom@50 {
@@ -133,7 +271,7 @@
pagesize = <16>;
};
- rtc@68 {
+ ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
index 0857de5..11f84ee 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -22,6 +23,53 @@
reg = <0x10000000 0x20000000>;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -111,11 +159,121 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- gpio@23 {
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@6 {
+ gw,mode = <0>;
+ reg = <0x06>;
+ label = "temp";
+ };
+
+ channel@8 {
+ gw,mode = <3>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@82 {
+ gw,mode = <2>;
+ reg = <0x82>;
+ label = "vdd_vin";
+ gw,voltage-divider-ohms = <22100 1000>;
+ gw,voltage-offset-microvolt = <800000>;
+ };
+
+ channel@84 {
+ gw,mode = <2>;
+ reg = <0x84>;
+ label = "vdd_5p0";
+ gw,voltage-divider-ohms = <22100 10000>;
+ };
+
+ channel@86 {
+ gw,mode = <2>;
+ reg = <0x86>;
+ label = "vdd_3p3";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@88 {
+ gw,mode = <2>;
+ reg = <0x88>;
+ label = "vdd_2p5";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@8c {
+ gw,mode = <2>;
+ reg = <0x8c>;
+ label = "vdd_3p0";
+ };
+
+ channel@8e {
+ gw,mode = <2>;
+ reg = <0x8e>;
+ label = "vdd_arm";
+ };
+
+ channel@90 {
+ gw,mode = <2>;
+ reg = <0x90>;
+ label = "vdd_soc";
+ };
+
+ channel@92 {
+ gw,mode = <2>;
+ reg = <0x92>;
+ label = "vdd_1p5";
+ };
+
+ channel@98 {
+ gw,mode = <2>;
+ reg = <0x98>;
+ label = "vdd_1p8";
+ };
+
+ channel@9a {
+ gw,mode = <2>;
+ reg = <0x9a>;
+ label = "vdd_1p0";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@9c {
+ gw,mode = <2>;
+ reg = <0x9c>;
+ label = "vdd_an1";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@a2 {
+ gw,mode = <2>;
+ reg = <0xa2>;
+ label = "vdd_gsc";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
};
eeprom@50 {
diff --git a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
index 8c57fd2..0a1ffff 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -20,6 +21,53 @@
stdout-path = &uart2;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -106,11 +154,109 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- gpio@23 {
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_1p0";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+ };
+
+ fan-controller@a {
+ compatible = "gw,gsc-fan";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0a>;
+ };
+ };
+
+ gsc_gpio: gpio@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
};
eeprom@50 {
diff --git a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
index 635c203..d62a8da 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -19,6 +20,53 @@
stdout-path = &uart2;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -87,11 +135,114 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- gpio@23 {
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@6 {
+ gw,mode = <0>;
+ reg = <0x06>;
+ label = "temp";
+ };
+
+ channel@8 {
+ gw,mode = <3>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@82 {
+ gw,mode = <2>;
+ reg = <0x82>;
+ label = "vdd_vin";
+ gw,voltage-divider-ohms = <22100 1000>;
+ gw,voltage-offset-microvolt = <800000>;
+ };
+
+ channel@84 {
+ gw,mode = <2>;
+ reg = <0x84>;
+ label = "vdd_5p0";
+ gw,voltage-divider-ohms = <22100 10000>;
+ };
+
+ channel@86 {
+ gw,mode = <2>;
+ reg = <0x86>;
+ label = "vdd_3p3";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@88 {
+ gw,mode = <2>;
+ reg = <0x88>;
+ label = "vdd_2p5";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@8c {
+ gw,mode = <2>;
+ reg = <0x8c>;
+ label = "vdd_arm";
+ };
+
+ channel@8e {
+ gw,mode = <2>;
+ reg = <0x8e>;
+ label = "vdd_soc";
+ };
+
+ channel@90 {
+ gw,mode = <2>;
+ reg = <0x90>;
+ label = "vdd_1p5";
+ };
+
+ channel@92 {
+ gw,mode = <2>;
+ reg = <0x92>;
+ label = "vdd_1p0";
+ };
+
+ channel@98 {
+ gw,mode = <2>;
+ reg = <0x98>;
+ label = "vdd_3p0";
+ };
+
+ channel@9a {
+ gw,mode = <2>;
+ reg = <0x9a>;
+ label = "vdd_an1";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@a2 {
+ gw,mode = <2>;
+ reg = <0xa2>;
+ label = "vdd_gsc";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
};
eeprom@50 {
--
2.7.4
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH v4] ARM: dts: imx6qdl-gw: add Gateworks System Controller support
@ 2020-07-16 15:35 ` Tim Harvey
0 siblings, 0 replies; 17+ messages in thread
From: Tim Harvey @ 2020-07-16 15:35 UTC (permalink / raw)
To: Shawn Guo, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
devicetree, Rob Herring, linux-kernel, rjones
Cc: Tim Harvey, linux-arm-kernel
Add Gateworks System Controller support to Gateworks Ventana boards:
- add dt bindings for GSC mfd driver and hwmon driver for ADC's and
fan controllers.
- add dt bindings for gpio-keys driver for push-button and interrupt events
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
v4:
- add missing #address-cells to gw5912 gsc node to address dtc warning
v3:
- change underscore to hyphen in node names
- use generic node name for gsc_gpio nodes
v2:
- use keycode bindings from linux-event-codes.h
- fix gw5910 vdd_bat adc mode
- fix gw5913 vdd_bat adc mode
---
arch/arm/boot/dts/imx6qdl-gw51xx.dtsi | 153 +++++++++++++++++++++++++++++--
arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 159 ++++++++++++++++++++++++++++++--
arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 165 +++++++++++++++++++++++++++++++--
arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 167 ++++++++++++++++++++++++++++++++--
arch/arm/boot/dts/imx6qdl-gw551x.dtsi | 147 ++++++++++++++++++++++++++++--
arch/arm/boot/dts/imx6qdl-gw552x.dtsi | 153 +++++++++++++++++++++++++++++--
arch/arm/boot/dts/imx6qdl-gw553x.dtsi | 141 +++++++++++++++++++++++++++-
arch/arm/boot/dts/imx6qdl-gw560x.dtsi | 164 +++++++++++++++++++++++++++++++--
arch/arm/boot/dts/imx6qdl-gw5903.dtsi | 140 +++++++++++++++++++++++++++-
arch/arm/boot/dts/imx6qdl-gw5904.dtsi | 141 +++++++++++++++++++++++++++-
arch/arm/boot/dts/imx6qdl-gw5907.dtsi | 142 ++++++++++++++++++++++++++++-
arch/arm/boot/dts/imx6qdl-gw5910.dtsi | 160 +++++++++++++++++++++++++++++++-
arch/arm/boot/dts/imx6qdl-gw5912.dtsi | 148 +++++++++++++++++++++++++++++-
arch/arm/boot/dts/imx6qdl-gw5913.dtsi | 153 ++++++++++++++++++++++++++++++-
14 files changed, 2076 insertions(+), 57 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
index 419a7cd..7705285 100644
--- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -19,6 +20,53 @@
bootargs = "console=ttymxc1,115200";
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -102,6 +150,103 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_an1";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
+ };
+
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
@@ -126,13 +271,6 @@
pagesize = <16>;
};
- gpio: pca9555@23 {
- compatible = "nxp,pca9555";
- reg = <0x23>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
rtc: ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
@@ -387,6 +525,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 /* GSC_IRQ# */
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index 60563ff..9e5bec1 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -28,6 +29,53 @@
default-brightness-level = <7>;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -165,6 +213,109 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_1p0";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+
+ channel@29 {
+ gw,mode = <1>;
+ reg = <0x29>;
+ label = "vdd_an1";
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
+ };
+
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
@@ -189,13 +340,6 @@
pagesize = <16>;
};
- gpio: pca9555@23 {
- compatible = "nxp,pca9555";
- reg = <0x23>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
rtc: ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
@@ -504,6 +648,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index 8942bec..7ea4fdd 100644
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -28,6 +29,53 @@
default-brightness-level = <7>;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -158,6 +206,115 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_1p0";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+
+ channel@26 {
+ gw,mode = <1>;
+ reg = <0x26>;
+ label = "vdd_gps";
+ };
+
+ channel@29 {
+ gw,mode = <1>;
+ reg = <0x29>;
+ label = "vdd_an1";
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
+ };
+
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
@@ -182,13 +339,6 @@
pagesize = <16>;
};
- gpio: pca9555@23 {
- compatible = "nxp,pca9555";
- reg = <0x23>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
rtc: ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
@@ -486,6 +636,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index c40583d..0c19759 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/sound/fsl-imx-audmux.h>
/ {
@@ -29,6 +30,53 @@
default-brightness-level = <7>;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -195,6 +243,117 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_1p0";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+
+ channel@26 {
+ gw,mode = <1>;
+ reg = <0x26>;
+ label = "vdd_gps";
+ };
+ };
+
+ fan-controller@2c {
+ compatible = "gw,gsc-fan";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2c>;
+ };
+ };
+
+ gsc_gpio: gpio@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
+ };
+
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
@@ -219,13 +378,6 @@
pagesize = <16>;
};
- gpio: pca9555@23 {
- compatible = "nxp,pca9555";
- reg = <0x23>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
rtc: ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
@@ -571,6 +723,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
index 8c33510..1516e2b 100644
--- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
@@ -47,6 +47,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/media/tda1997x.h>
+#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/sound/fsl-imx-audmux.h>
/ {
@@ -63,6 +64,53 @@
bootargs = "console=ttymxc1,115200";
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -167,6 +215,97 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8a";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_1p0b";
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
+ };
+
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
@@ -191,13 +330,6 @@
pagesize = <16>;
};
- gpio: pca9555@23 {
- compatible = "nxp,pca9555";
- reg = <0x23>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
rtc: ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
@@ -464,6 +596,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
index bb35971..0da6e6f 100644
--- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -20,6 +21,53 @@
bootargs = "console=ttymxc1,115200";
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -92,6 +140,103 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_1p0";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
+ };
+
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
@@ -116,13 +261,6 @@
pagesize = <16>;
};
- gpio: pca9555@23 {
- compatible = "nxp,pca9555";
- reg = <0x23>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
rtc: ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
@@ -305,6 +443,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
index ee85031..db30de5 100644
--- a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
@@ -46,6 +46,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -61,6 +62,53 @@
stdout-path = &uart2;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -130,11 +178,101 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- gpio: pca9555@23 {
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8a";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_1p0b";
+ };
+
+ channel@26 {
+ gw,mode = <1>;
+ reg = <0x26>;
+ label = "vdd_an1";
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
};
eeprom1: eeprom@50 {
@@ -428,6 +566,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
index 69ca70d..940520f 100644
--- a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
@@ -88,6 +88,53 @@
default-on;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -243,6 +290,115 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_an1";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+
+ channel@26 {
+ gw,mode = <1>;
+ reg = <0x26>;
+ label = "vdd_gps";
+ };
+
+ channel@29 {
+ gw,mode = <1>;
+ reg = <0x29>;
+ label = "vdd_an2";
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
+ };
+
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
@@ -267,13 +423,6 @@
pagesize = <16>;
};
- pca9555: gpio@23 {
- compatible = "nxp,pca9555";
- reg = <0x23>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
ds1672: rtc@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
@@ -608,6 +757,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
index aee9221..0461085 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
@@ -46,6 +46,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
chosen {
@@ -71,6 +72,53 @@
default-brightness-level = <100>;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -183,11 +231,101 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- pca9555: gpio@23 {
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_an1";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
};
eeprom1: eeprom@50 {
diff --git a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
index 76d6cf5..e73090f 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
@@ -46,6 +46,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -68,6 +69,53 @@
default-brightness-level = <7>;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -205,11 +253,101 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- pca9555: gpio@23 {
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_an1";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
};
eeprom1: eeprom@50 {
@@ -503,6 +641,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 /* GSC_IRQ# */
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
index 0bdebdd..b1ff7c8 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -19,6 +20,53 @@
stdout-path = &uart2;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -102,11 +150,101 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- gpio@23 {
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_an1";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
};
eeprom@50 {
@@ -133,7 +271,7 @@
pagesize = <16>;
};
- rtc@68 {
+ ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
index 0857de5..11f84ee 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -22,6 +23,53 @@
reg = <0x10000000 0x20000000>;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -111,11 +159,121 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- gpio@23 {
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@6 {
+ gw,mode = <0>;
+ reg = <0x06>;
+ label = "temp";
+ };
+
+ channel@8 {
+ gw,mode = <3>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@82 {
+ gw,mode = <2>;
+ reg = <0x82>;
+ label = "vdd_vin";
+ gw,voltage-divider-ohms = <22100 1000>;
+ gw,voltage-offset-microvolt = <800000>;
+ };
+
+ channel@84 {
+ gw,mode = <2>;
+ reg = <0x84>;
+ label = "vdd_5p0";
+ gw,voltage-divider-ohms = <22100 10000>;
+ };
+
+ channel@86 {
+ gw,mode = <2>;
+ reg = <0x86>;
+ label = "vdd_3p3";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@88 {
+ gw,mode = <2>;
+ reg = <0x88>;
+ label = "vdd_2p5";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@8c {
+ gw,mode = <2>;
+ reg = <0x8c>;
+ label = "vdd_3p0";
+ };
+
+ channel@8e {
+ gw,mode = <2>;
+ reg = <0x8e>;
+ label = "vdd_arm";
+ };
+
+ channel@90 {
+ gw,mode = <2>;
+ reg = <0x90>;
+ label = "vdd_soc";
+ };
+
+ channel@92 {
+ gw,mode = <2>;
+ reg = <0x92>;
+ label = "vdd_1p5";
+ };
+
+ channel@98 {
+ gw,mode = <2>;
+ reg = <0x98>;
+ label = "vdd_1p8";
+ };
+
+ channel@9a {
+ gw,mode = <2>;
+ reg = <0x9a>;
+ label = "vdd_1p0";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@9c {
+ gw,mode = <2>;
+ reg = <0x9c>;
+ label = "vdd_an1";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@a2 {
+ gw,mode = <2>;
+ reg = <0xa2>;
+ label = "vdd_gsc";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
};
eeprom@50 {
diff --git a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
index 8c57fd2..0a1ffff 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -20,6 +21,53 @@
stdout-path = &uart2;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -106,11 +154,109 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- gpio@23 {
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_1p0";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+ };
+
+ fan-controller@a {
+ compatible = "gw,gsc-fan";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0a>;
+ };
+ };
+
+ gsc_gpio: gpio@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
};
eeprom@50 {
diff --git a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
index 635c203..d62a8da 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -19,6 +20,53 @@
stdout-path = &uart2;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -87,11 +135,114 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- gpio@23 {
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@6 {
+ gw,mode = <0>;
+ reg = <0x06>;
+ label = "temp";
+ };
+
+ channel@8 {
+ gw,mode = <3>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@82 {
+ gw,mode = <2>;
+ reg = <0x82>;
+ label = "vdd_vin";
+ gw,voltage-divider-ohms = <22100 1000>;
+ gw,voltage-offset-microvolt = <800000>;
+ };
+
+ channel@84 {
+ gw,mode = <2>;
+ reg = <0x84>;
+ label = "vdd_5p0";
+ gw,voltage-divider-ohms = <22100 10000>;
+ };
+
+ channel@86 {
+ gw,mode = <2>;
+ reg = <0x86>;
+ label = "vdd_3p3";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@88 {
+ gw,mode = <2>;
+ reg = <0x88>;
+ label = "vdd_2p5";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@8c {
+ gw,mode = <2>;
+ reg = <0x8c>;
+ label = "vdd_arm";
+ };
+
+ channel@8e {
+ gw,mode = <2>;
+ reg = <0x8e>;
+ label = "vdd_soc";
+ };
+
+ channel@90 {
+ gw,mode = <2>;
+ reg = <0x90>;
+ label = "vdd_1p5";
+ };
+
+ channel@92 {
+ gw,mode = <2>;
+ reg = <0x92>;
+ label = "vdd_1p0";
+ };
+
+ channel@98 {
+ gw,mode = <2>;
+ reg = <0x98>;
+ label = "vdd_3p0";
+ };
+
+ channel@9a {
+ gw,mode = <2>;
+ reg = <0x9a>;
+ label = "vdd_an1";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@a2 {
+ gw,mode = <2>;
+ reg = <0xa2>;
+ label = "vdd_gsc";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
};
eeprom@50 {
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 17+ messages in thread* Re: [PATCH v4] ARM: dts: imx6qdl-gw: add Gateworks System Controller support
2020-07-16 15:35 ` Tim Harvey
@ 2020-07-20 1:48 ` Shawn Guo
-1 siblings, 0 replies; 17+ messages in thread
From: Shawn Guo @ 2020-07-20 1:48 UTC (permalink / raw)
To: Tim Harvey
Cc: Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam, devicetree,
Rob Herring, linux-kernel, rjones, linux-arm-kernel
On Thu, Jul 16, 2020 at 08:35:55AM -0700, Tim Harvey wrote:
> Add Gateworks System Controller support to Gateworks Ventana boards:
> - add dt bindings for GSC mfd driver and hwmon driver for ADC's and
> fan controllers.
> - add dt bindings for gpio-keys driver for push-button and interrupt events
>
> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Applied, thanks.
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH v4] ARM: dts: imx6qdl-gw: add Gateworks System Controller support
@ 2020-07-20 1:48 ` Shawn Guo
0 siblings, 0 replies; 17+ messages in thread
From: Shawn Guo @ 2020-07-20 1:48 UTC (permalink / raw)
To: Tim Harvey
Cc: devicetree, rjones, Sascha Hauer, linux-kernel, Rob Herring,
Pengutronix Kernel Team, Fabio Estevam, linux-arm-kernel
On Thu, Jul 16, 2020 at 08:35:55AM -0700, Tim Harvey wrote:
> Add Gateworks System Controller support to Gateworks Ventana boards:
> - add dt bindings for GSC mfd driver and hwmon driver for ADC's and
> fan controllers.
> - add dt bindings for gpio-keys driver for push-button and interrupt events
>
> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Applied, thanks.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 17+ messages in thread