* [RESEND v3 PATCH] usb: gadget: bdc: use readl_poll_timeout() to simplify code
@ 2020-07-22 6:51 ` Chunfeng Yun
0 siblings, 0 replies; 3+ messages in thread
From: Chunfeng Yun @ 2020-07-22 6:51 UTC (permalink / raw)
To: Felipe Balbi, Florian Fainelli
Cc: Greg Kroah-Hartman, Matthias Brugger, YueHaibing, Stephen Boyd,
Chunfeng Yun, linux-usb, linux-kernel, linux-arm-kernel,
linux-mediatek
Use readl_poll_timeout() to poll register status
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---
v3 changes:
1. indent code to match open parenthesis suggested by Florian
2. add Reviewed-by Florian
v2 changes, suggested by Stephen:
1. use unsigned int instead of int for @usec parameter
2. add dev_log() back
3. drop "Err" in error log
---
drivers/usb/gadget/udc/bdc/bdc_core.c | 26 +++++++++++---------------
1 file changed, 11 insertions(+), 15 deletions(-)
diff --git a/drivers/usb/gadget/udc/bdc/bdc_core.c b/drivers/usb/gadget/udc/bdc/bdc_core.c
index 02a3a77..d567e20 100644
--- a/drivers/usb/gadget/udc/bdc/bdc_core.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_core.c
@@ -12,6 +12,7 @@
#include <linux/spinlock.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
+#include <linux/iopoll.h>
#include <linux/ioport.h>
#include <linux/io.h>
#include <linux/list.h>
@@ -29,24 +30,19 @@
#include "bdc_dbg.h"
/* Poll till controller status is not OIP */
-static int poll_oip(struct bdc *bdc, int usec)
+static int poll_oip(struct bdc *bdc, u32 usec)
{
u32 status;
- /* Poll till STS!= OIP */
- while (usec) {
- status = bdc_readl(bdc->regs, BDC_BDCSC);
- if (BDC_CSTS(status) != BDC_OIP) {
- dev_dbg(bdc->dev,
- "poll_oip complete status=%d",
- BDC_CSTS(status));
- return 0;
- }
- udelay(10);
- usec -= 10;
- }
- dev_err(bdc->dev, "Err: operation timedout BDCSC: 0x%08x\n", status);
+ int ret;
- return -ETIMEDOUT;
+ ret = readl_poll_timeout(bdc->regs + BDC_BDCSC, status,
+ (BDC_CSTS(status) != BDC_OIP), 10, usec);
+ if (ret)
+ dev_err(bdc->dev, "operation timedout BDCSC: 0x%08x\n", status);
+ else
+ dev_dbg(bdc->dev, "%s complete status=%d", __func__, BDC_CSTS(status));
+
+ return ret;
}
/* Stop the BDC controller */
--
1.9.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [RESEND v3 PATCH] usb: gadget: bdc: use readl_poll_timeout() to simplify code
@ 2020-07-22 6:51 ` Chunfeng Yun
0 siblings, 0 replies; 3+ messages in thread
From: Chunfeng Yun @ 2020-07-22 6:51 UTC (permalink / raw)
To: Felipe Balbi, Florian Fainelli
Cc: Greg Kroah-Hartman, linux-usb, YueHaibing, linux-kernel,
Stephen Boyd, Chunfeng Yun, linux-mediatek, Matthias Brugger,
linux-arm-kernel
Use readl_poll_timeout() to poll register status
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---
v3 changes:
1. indent code to match open parenthesis suggested by Florian
2. add Reviewed-by Florian
v2 changes, suggested by Stephen:
1. use unsigned int instead of int for @usec parameter
2. add dev_log() back
3. drop "Err" in error log
---
drivers/usb/gadget/udc/bdc/bdc_core.c | 26 +++++++++++---------------
1 file changed, 11 insertions(+), 15 deletions(-)
diff --git a/drivers/usb/gadget/udc/bdc/bdc_core.c b/drivers/usb/gadget/udc/bdc/bdc_core.c
index 02a3a77..d567e20 100644
--- a/drivers/usb/gadget/udc/bdc/bdc_core.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_core.c
@@ -12,6 +12,7 @@
#include <linux/spinlock.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
+#include <linux/iopoll.h>
#include <linux/ioport.h>
#include <linux/io.h>
#include <linux/list.h>
@@ -29,24 +30,19 @@
#include "bdc_dbg.h"
/* Poll till controller status is not OIP */
-static int poll_oip(struct bdc *bdc, int usec)
+static int poll_oip(struct bdc *bdc, u32 usec)
{
u32 status;
- /* Poll till STS!= OIP */
- while (usec) {
- status = bdc_readl(bdc->regs, BDC_BDCSC);
- if (BDC_CSTS(status) != BDC_OIP) {
- dev_dbg(bdc->dev,
- "poll_oip complete status=%d",
- BDC_CSTS(status));
- return 0;
- }
- udelay(10);
- usec -= 10;
- }
- dev_err(bdc->dev, "Err: operation timedout BDCSC: 0x%08x\n", status);
+ int ret;
- return -ETIMEDOUT;
+ ret = readl_poll_timeout(bdc->regs + BDC_BDCSC, status,
+ (BDC_CSTS(status) != BDC_OIP), 10, usec);
+ if (ret)
+ dev_err(bdc->dev, "operation timedout BDCSC: 0x%08x\n", status);
+ else
+ dev_dbg(bdc->dev, "%s complete status=%d", __func__, BDC_CSTS(status));
+
+ return ret;
}
/* Stop the BDC controller */
--
1.9.1
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [RESEND v3 PATCH] usb: gadget: bdc: use readl_poll_timeout() to simplify code
@ 2020-07-22 6:51 ` Chunfeng Yun
0 siblings, 0 replies; 3+ messages in thread
From: Chunfeng Yun @ 2020-07-22 6:51 UTC (permalink / raw)
To: Felipe Balbi, Florian Fainelli
Cc: Greg Kroah-Hartman, linux-usb, YueHaibing, linux-kernel,
Stephen Boyd, Chunfeng Yun, linux-mediatek, Matthias Brugger,
linux-arm-kernel
Use readl_poll_timeout() to poll register status
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---
v3 changes:
1. indent code to match open parenthesis suggested by Florian
2. add Reviewed-by Florian
v2 changes, suggested by Stephen:
1. use unsigned int instead of int for @usec parameter
2. add dev_log() back
3. drop "Err" in error log
---
drivers/usb/gadget/udc/bdc/bdc_core.c | 26 +++++++++++---------------
1 file changed, 11 insertions(+), 15 deletions(-)
diff --git a/drivers/usb/gadget/udc/bdc/bdc_core.c b/drivers/usb/gadget/udc/bdc/bdc_core.c
index 02a3a77..d567e20 100644
--- a/drivers/usb/gadget/udc/bdc/bdc_core.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_core.c
@@ -12,6 +12,7 @@
#include <linux/spinlock.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
+#include <linux/iopoll.h>
#include <linux/ioport.h>
#include <linux/io.h>
#include <linux/list.h>
@@ -29,24 +30,19 @@
#include "bdc_dbg.h"
/* Poll till controller status is not OIP */
-static int poll_oip(struct bdc *bdc, int usec)
+static int poll_oip(struct bdc *bdc, u32 usec)
{
u32 status;
- /* Poll till STS!= OIP */
- while (usec) {
- status = bdc_readl(bdc->regs, BDC_BDCSC);
- if (BDC_CSTS(status) != BDC_OIP) {
- dev_dbg(bdc->dev,
- "poll_oip complete status=%d",
- BDC_CSTS(status));
- return 0;
- }
- udelay(10);
- usec -= 10;
- }
- dev_err(bdc->dev, "Err: operation timedout BDCSC: 0x%08x\n", status);
+ int ret;
- return -ETIMEDOUT;
+ ret = readl_poll_timeout(bdc->regs + BDC_BDCSC, status,
+ (BDC_CSTS(status) != BDC_OIP), 10, usec);
+ if (ret)
+ dev_err(bdc->dev, "operation timedout BDCSC: 0x%08x\n", status);
+ else
+ dev_dbg(bdc->dev, "%s complete status=%d", __func__, BDC_CSTS(status));
+
+ return ret;
}
/* Stop the BDC controller */
--
1.9.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-07-22 7:08 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-22 6:51 [RESEND v3 PATCH] usb: gadget: bdc: use readl_poll_timeout() to simplify code Chunfeng Yun
2020-07-22 6:51 ` Chunfeng Yun
2020-07-22 6:51 ` Chunfeng Yun
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.