[PATCH v9 2/7] dt-bindings: pinctrl: add bindings for MediaTek MT6779 SoC

[Hanks Chen <hanks.chen@mediatek.com>]

From: Andy Teng <andy.teng@mediatek.com>

Add devicetree bindings for MediaTek MT6779 pinctrl driver.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andy Teng <andy.teng@mediatek.com>
Signed-off-by: Hanks Chen <hanks.chen@mediatek.com>
---
 .../pinctrl/mediatek,mt6779-pinctrl.yaml      | 197 ++++++++++++++++++
 1 file changed, 197 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml

diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
new file mode 100644
index 000000000000..2b304fe26d8a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
@@ -0,0 +1,197 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt6779-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT6779 Pin Controller Device Tree Bindings
+
+maintainers:
+  - Andy Teng <andy.teng@mediatek.com>
+
+description: |+
+  The pin controller node should be the child of a syscon node with the
+  required property:
+  - compatible: "syscon"
+
+properties:
+  compatible:
+    const: mediatek,mt6779-pinctrl
+
+  reg:
+    minItems: 9
+    maxItems: 9
+
+  reg-names:
+    items:
+      - const: "gpio"
+      - const: "iocfg_rm"
+      - const: "iocfg_br"
+      - const: "iocfg_lm"
+      - const: "iocfg_lb"
+      - const: "iocfg_rt"
+      - const: "iocfg_lt"
+      - const: "iocfg_tl"
+      - const: "eint"
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+    description: |
+      Number of cells in GPIO specifier. Since the generic GPIO
+      binding is used, the amount of cells must be specified as 2. See the below
+      mentioned gpio binding representation for description of particular cells.
+
+  gpio-ranges:
+    minItems: 1
+    maxItems: 5
+    description: |
+      GPIO valid number range.
+
+  interrupt-controller: true
+
+  interrupts:
+    maxItems: 1
+    description: |
+      Specifies the summary IRQ.
+
+  "#interrupt-cells":
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - gpio-controller
+  - "#gpio-cells"
+  - gpio-ranges
+  - interrupt-controller
+  - interrupts
+  - "#interrupt-cells"
+
+patternProperties:
+  '-[0-9]*$':
+    type: object
+    patternProperties:
+      '-pins*$':
+        type: object
+        description: |
+          A pinctrl node should contain at least one subnodes representing the
+          pinctrl groups available on the machine. Each subnode will list the
+          pins it needs, and how they should be configured, with regard to muxer
+          configuration, pullups, drive strength, input enable/disable and input schmitt.
+        $ref: "/schemas/pinctrl/pincfg-node.yaml"
+
+        properties:
+          pinmux:
+            description:
+              integer array, represents gpio pin number and mux setting.
+              Supported pin number and mux varies for different SoCs, and are defined
+              as macros in boot/dts/<soc>-pinfunc.h directly.
+
+          bias-disable: true
+
+          bias-pull-up: true
+
+          bias-pull-down: true
+
+          input-enable: true
+
+          input-disable: true
+
+          output-low: true
+
+          output-high: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+          mediatek,pull-up-adv:
+            description: |
+              Pull up setings for 2 pull resistors, R0 and R1. User can
+              configure those special pins. Valid arguments are described as below:
+              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+          mediatek,pull-down-adv:
+            description: |
+              Pull down settings for 2 pull resistors, R0 and R1. User can
+              configure those special pins. Valid arguments are described as below:
+              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+        required:
+          - pinmux
+
+        additionalProperties: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/pinctrl/mt6779-pinfunc.h>
+
+    pio: pinctrl@10005000 {
+        compatible = "mediatek,mt6779-pinctrl";
+        reg = <0 0x10005000 0 0x1000>,
+            <0 0x11c20000 0 0x1000>,
+            <0 0x11d10000 0 0x1000>,
+            <0 0x11e20000 0 0x1000>,
+            <0 0x11e70000 0 0x1000>,
+            <0 0x11ea0000 0 0x1000>,
+            <0 0x11f20000 0 0x1000>,
+            <0 0x11f30000 0 0x1000>,
+            <0 0x1000b000 0 0x1000>;
+        reg-names = "gpio", "iocfg_rm",
+          "iocfg_br", "iocfg_lm",
+          "iocfg_lb", "iocfg_rt",
+          "iocfg_lt", "iocfg_tl",
+          "eint";
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&pio 0 0 210>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+
+        mmc0_pins_default: mmc0-0 {
+            cmd-dat-pins {
+                pinmux = <PINMUX_GPIO168__FUNC_MSDC0_DAT0>,
+                    <PINMUX_GPIO172__FUNC_MSDC0_DAT1>,
+                    <PINMUX_GPIO169__FUNC_MSDC0_DAT2>,
+                    <PINMUX_GPIO177__FUNC_MSDC0_DAT3>,
+                    <PINMUX_GPIO170__FUNC_MSDC0_DAT4>,
+                    <PINMUX_GPIO173__FUNC_MSDC0_DAT5>,
+                    <PINMUX_GPIO171__FUNC_MSDC0_DAT6>,
+                    <PINMUX_GPIO174__FUNC_MSDC0_DAT7>,
+                    <PINMUX_GPIO167__FUNC_MSDC0_CMD>;
+                input-enable;
+                mediatek,pull-up-adv = <1>;
+            };
+            clk-pins {
+                pinmux = <PINMUX_GPIO176__FUNC_MSDC0_CLK>;
+                mediatek,pull-down-adv = <2>;
+            };
+            rst-pins {
+                pinmux = <PINMUX_GPIO178__FUNC_MSDC0_RSTB>;
+                mediatek,pull-up-adv = <0>;
+            };
+        };
+    };
+
+    mmc0 {
+       pinctrl-0 = <&mmc0_pins_default>;
+       pinctrl-names = "default";
+    };
-- 
2.18.0