* [GIT PULL] TTY/Serial driver patches for 5.9-rc1
@ 2020-08-06 12:33 Greg KH
2020-08-06 21:59 ` pr-tracker-bot
0 siblings, 1 reply; 2+ messages in thread
From: Greg KH @ 2020-08-06 12:33 UTC (permalink / raw)
To: Linus Torvalds
Cc: Jiri Slaby, Stephen Rothwell, Andrew Morton, linux-kernel, linux-serial
The following changes since commit 92ed301919932f777713b9172e525674157e983d:
Linux 5.8-rc7 (2020-07-26 14:14:06 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git tags/tty-5.9-rc1
for you to fetch changes up to f6c6eb2fe8223f8e64babcdaad2838ba6ede277d:
MAINTAINERS: enlist Greg formally for console stuff (2020-08-04 09:41:22 +0200)
----------------------------------------------------------------
TTY/Serial patches for 5.9-rc1
Here is the large set of TTY and Serial driver patches for 5.9-rc1.
Lots of bugfixes in here, thanks to syzbot fuzzing for serial and vt and
console code.
Other highlights include:
- much needed vt/vc code cleanup from Jiri Slaby
- 8250 driver fixes and additions
- various serial driver updates and feature enhancements
- locking cleanup for serial/console initializations
- other minor cleanups
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----------------------------------------------------------------
Ahmad Fatoum (1):
serial: imx: use hrtimers for rs485 delays
Alexander A. Klimov (4):
tty: vt: Replace HTTP links with HTTPS ones
tty: serial: Replace HTTP links with HTTPS ones
tty: serial: uartlite: Replace HTTP links with HTTPS ones
serial: altera_jtaguart: Replace HTTP links with HTTPS ones
Alexey Kardashevskiy (1):
tty/vt: Do not warn when huge selection requested
Andy Shevchenko (12):
serial: 8250_em: Switch to use platform_get_irq()
serial: 8250_omap: Switch to use platform_get_irq()
serial: 8250_pxa: Switch to use platform_get_irq()
serial: 8250_ingenic: Switch to use platform_get_irq()
serial: 8250_mtk: Switch to use platform_get_irq()
Revert "serial: sunhv: Initialize lock for non-registered console"
Revert "serial: amba-pl011: Make sure we initialize the port.lock spinlock"
Revert "tty: serial: add missing spin_lock_init for SiFive serial console"
Revert "serial: imx: Initialize lock for non-registered console"
Revert "serial: sh-sci: Initialize spinlock for uart console"
serial: 8250: Let serial core initialise spin lock
Revert "serial: 8250: Let serial core initialise spin lock"
Christoph Hellwig (1):
tty/synclink: remove leftover bits of non-PCI card support
Dan Carpenter (1):
tty: serial: qcom_geni_serial: Clean up an ARRAY_SIZE() vs sizeof()
Daniel Vetter (1):
MAINTAINERS: enlist Greg formally for console stuff
Denis Efremov (1):
tty/vt: check allocation size in con_set_unimap()
Douglas Anderson (1):
serial: kgdboc: Fix bad line wrapping in comment
Erwan Le Ray (2):
dt-bindings: serial: add generic DT binding for announcing RTS/CTS lines
serial: stm32: Use generic DT binding for announcing RTS/CTS lines
Flavio Suligoi (1):
tty: fix spelling mistake
Fugang Duan (2):
tty: serial: imx: enable imx serial console port as module
tty: serial: imx: add imx earlycon driver
Greg Kroah-Hartman (2):
Merge 5.8-rc6 into tty-next
Merge 5.8-rc7 into tty-next
Gustavo A. R. Silva (3):
tty: Avoid the use of one-element arrays
tty: Fix identation issues in struct serial_struct32
tty: Use the preferred form for passing the size of a structure type
Jiri Slaby (41):
um: line, remove put_char
vc: separate state
vt: introduce enum vc_intensity for intensity
vc: switch state to bool
vt: deduplicate setGx code
vt: switch G0/1_charset to an array
vt: convert vc_tab_stop to bitmap
vt: remove 25 years stale comment
vt: use tty_insert_flip_string in respond_string
vt: get rid of VT10.ID macros
vt: move vc_translate to vt.c and rename it
vt: use modern types in do_con_write
vt: separate unicode handling into vc_translate_unicode
vt: rearrange vc_translate_unicode
vt: extract attribute inversion to vc_invert_attr
vt: move rescan_last_byte label earlier
vc: move translation out of do_con_write
vc: introduce struct vc_draw_region
vc: extract detecting control characters from do_con_write
vc: move normal char processing from do_con_write
vc: simplify condition in vc_con_write_normal
vt: simplify vc_attr handling in vc_con_write_normal
vt: make tc write more obvious in vc_con_write_normal
vt: synchronize types and use min in csi_X
vt: whitespace and paren cleanup in add_softcursor
vt: redefine world of cursor macros
vt: use newly defined CUR_* macros
vt: remove superfluous parens in invert_screen and build_attr
vt: simplify noncolor attributes in build_attr
vt_ioctl: eliminate ret & breaks in vt_ioctl
vt_ioctl: eliminate use of uival and ucval
vt_ioctl: move K* ioctls to a separate function
vt_ioctl: move io ioctls to a separate function
vt_ioctl: move vt_setactivate out of vt_ioctl
vt_ioctl: move vt_reldisp out of vt_ioctl
vt_ioctl: move vt_resizex out of vt_ioctl
vt_ioctl: move vt_io_fontreset out of vt_io_ioctl
vt_ioctl: move vt_kdsetmode out of vt_k_ioctl
vt_ioctl: move perm checks level up
newport_con: vc_color is now in state
tty: keyboard, do not speculate on func_table index
Johan Hovold (3):
serial: core: drop unnecessary gpio include
serial: pmac_zilog: add sparse context annotation
serial: msm_serial: add sparse context annotation
Krzysztof Kozlowski (1):
serial: samsung: Minor whitespace cleanups
Marek Vasut (1):
serial: stm32: Add RS485 RTS GPIO control
Pavel Machek (1):
8250-men-mcb: fix signed/unsigned confusion
Randolph Maaßen (1):
serial: serial-tegra: reduce irq-latency after rx errors
Serge Semin (4):
serial: 8250: Add 8250 port clock update method
serial: 8250_dw: Simplify the ref clock rate setting procedure
serial: 8250_dw: Pass the same rate to the clk round and set rate methods
serial: 8250_dw: Fix common clocks usage race condition
Tamseel Shams (2):
serial: samsung: fix spelling mistake
serial: core: Fix Coding Style
Tiezhu Yang (1):
serial: Remove duplicated macro definition of port type
Uwe Kleine-König (1):
serial: imx: implement rts delaying for rs485
Vabhav Sharma (1):
tty: serial: fsl_lpuart: minimum baud rate support
Vaibhav Gupta (1):
serial: pch_uart: use generic power management
Yunhai Zhang (1):
vgacon: Fix for missing check in scrollback handling
.../devicetree/bindings/serial/st,stm32-uart.yaml | 4 +-
Documentation/driver-api/serial/n_gsm.rst | 2 +-
MAINTAINERS | 6 +
arch/um/drivers/line.c | 5 -
arch/um/drivers/line.h | 1 -
arch/um/drivers/ssl.c | 1 -
arch/um/drivers/stdio_console.c | 1 -
drivers/accessibility/braille/braille_console.c | 10 +-
drivers/staging/speakup/main.c | 28 +-
drivers/tty/moxa.h | 2 +-
drivers/tty/serial/8250/8250_dw.c | 120 ++-
drivers/tty/serial/8250/8250_em.c | 16 +-
drivers/tty/serial/8250/8250_ingenic.c | 16 +-
drivers/tty/serial/8250/8250_men_mcb.c | 4 +-
drivers/tty/serial/8250/8250_mtk.c | 16 +-
drivers/tty/serial/8250/8250_omap.c | 16 +-
drivers/tty/serial/8250/8250_port.c | 41 +
drivers/tty/serial/8250/8250_pxa.c | 14 +-
drivers/tty/serial/8250/Kconfig | 4 +-
drivers/tty/serial/Kconfig | 17 +-
drivers/tty/serial/altera_jtaguart.c | 2 +-
drivers/tty/serial/amba-pl011.c | 1 -
drivers/tty/serial/fsl_lpuart.c | 3 +
drivers/tty/serial/imx.c | 207 ++--
drivers/tty/serial/imx_earlycon.c | 50 +
drivers/tty/serial/jsm/jsm_driver.c | 2 +-
drivers/tty/serial/kgdboc.c | 3 +-
drivers/tty/serial/msm_serial.c | 2 +
drivers/tty/serial/pch_uart.c | 34 +-
drivers/tty/serial/pmac_zilog.c | 1 +
drivers/tty/serial/qcom_geni_serial.c | 2 +-
drivers/tty/serial/samsung_tty.c | 24 +-
drivers/tty/serial/serial-tegra.c | 6 +-
drivers/tty/serial/serial_core.c | 5 +-
drivers/tty/serial/sh-sci.c | 3 -
drivers/tty/serial/sifive.c | 1 -
drivers/tty/serial/stm32-usart.c | 13 +-
drivers/tty/serial/sunhv.c | 3 -
drivers/tty/serial/uartlite.c | 2 +-
drivers/tty/synclink.c | 350 ++----
drivers/tty/tty_io.c | 52 +-
drivers/tty/vt/consolemap.c | 2 +-
drivers/tty/vt/keyboard.c | 3 +-
drivers/tty/vt/selection.c | 2 +-
drivers/tty/vt/vt.c | 982 +++++++++--------
drivers/tty/vt/vt_ioctl.c | 1109 ++++++++++----------
drivers/usb/misc/sisusbvga/sisusb_con.c | 11 +-
drivers/video/console/mdacon.c | 20 +-
drivers/video/console/newport_con.c | 10 +-
drivers/video/console/sticon.c | 14 +-
drivers/video/console/vgacon.c | 40 +-
drivers/video/fbdev/core/bitblit.c | 10 +-
drivers/video/fbdev/core/fbcon.c | 10 +-
drivers/video/fbdev/core/fbcon_ccw.c | 8 +-
drivers/video/fbdev/core/fbcon_cw.c | 8 +-
drivers/video/fbdev/core/fbcon_ud.c | 8 +-
drivers/video/fbdev/core/tileblit.c | 6 +-
include/linux/console.h | 13 +-
include/linux/console_struct.h | 93 +-
include/linux/serial_8250.h | 2 +
include/linux/serial_core.h | 2 +-
include/linux/vt_kern.h | 3 -
include/uapi/linux/serial_core.h | 14 -
63 files changed, 1847 insertions(+), 1613 deletions(-)
create mode 100644 drivers/tty/serial/imx_earlycon.c
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [GIT PULL] TTY/Serial driver patches for 5.9-rc1
2020-08-06 12:33 [GIT PULL] TTY/Serial driver patches for 5.9-rc1 Greg KH
@ 2020-08-06 21:59 ` pr-tracker-bot
0 siblings, 0 replies; 2+ messages in thread
From: pr-tracker-bot @ 2020-08-06 21:59 UTC (permalink / raw)
To: Greg KH
Cc: Linus Torvalds, Jiri Slaby, Stephen Rothwell, Andrew Morton,
linux-kernel, linux-serial
The pull request you sent on Thu, 6 Aug 2020 14:33:54 +0200:
> git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git tags/tty-5.9-rc1
has been merged into torvalds/linux.git:
https://git.kernel.org/torvalds/c/d6efb3ac3e6c19ab722b28bdb9252bae0b9676b6
Thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/prtracker.html
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-08-06 21:59 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-08-06 12:33 [GIT PULL] TTY/Serial driver patches for 5.9-rc1 Greg KH
2020-08-06 21:59 ` pr-tracker-bot
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.