* [PATCH v3 01/11] usb: early: convert to readl_poll_timeout_atomic()
@ 2020-08-22 8:05 ` Chunfeng Yun
0 siblings, 0 replies; 36+ messages in thread
From: Chunfeng Yun @ 2020-08-22 8:05 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Felipe Balbi, Mathias Nyman, Sergei Shtylyov, linux-usb,
linux-kernel, Chunfeng Yun, linux-mediatek, Matthias Brugger,
Lee Jones, linux-arm-kernel, Lu Baolu
Use readl_poll_timeout_atomic() to simplify code
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v2~v3: no changes
---
drivers/usb/early/xhci-dbc.c | 14 ++++----------
1 file changed, 4 insertions(+), 10 deletions(-)
diff --git a/drivers/usb/early/xhci-dbc.c b/drivers/usb/early/xhci-dbc.c
index c050776..be4ecba 100644
--- a/drivers/usb/early/xhci-dbc.c
+++ b/drivers/usb/early/xhci-dbc.c
@@ -14,6 +14,7 @@
#include <linux/pci_ids.h>
#include <linux/memblock.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <asm/pci-direct.h>
#include <asm/fixmap.h>
#include <linux/bcd.h>
@@ -135,16 +136,9 @@ static int handshake(void __iomem *ptr, u32 mask, u32 done, int wait, int delay)
{
u32 result;
- do {
- result = readl(ptr);
- result &= mask;
- if (result == done)
- return 0;
- udelay(delay);
- wait -= delay;
- } while (wait > 0);
-
- return -ETIMEDOUT;
+ return readl_poll_timeout_atomic(ptr, result,
+ ((result & mask) == done),
+ delay, wait);
}
static void __init xdbc_bios_handoff(void)
--
1.9.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 36+ messages in thread* [PATCH v3 01/11] usb: early: convert to readl_poll_timeout_atomic()
@ 2020-08-22 8:05 ` Chunfeng Yun
0 siblings, 0 replies; 36+ messages in thread
From: Chunfeng Yun @ 2020-08-22 8:05 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Felipe Balbi, Mathias Nyman, Sergei Shtylyov, linux-usb,
linux-kernel, Chunfeng Yun, linux-mediatek, Matthias Brugger,
Lee Jones, linux-arm-kernel, Lu Baolu
Use readl_poll_timeout_atomic() to simplify code
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v2~v3: no changes
---
drivers/usb/early/xhci-dbc.c | 14 ++++----------
1 file changed, 4 insertions(+), 10 deletions(-)
diff --git a/drivers/usb/early/xhci-dbc.c b/drivers/usb/early/xhci-dbc.c
index c050776..be4ecba 100644
--- a/drivers/usb/early/xhci-dbc.c
+++ b/drivers/usb/early/xhci-dbc.c
@@ -14,6 +14,7 @@
#include <linux/pci_ids.h>
#include <linux/memblock.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <asm/pci-direct.h>
#include <asm/fixmap.h>
#include <linux/bcd.h>
@@ -135,16 +136,9 @@ static int handshake(void __iomem *ptr, u32 mask, u32 done, int wait, int delay)
{
u32 result;
- do {
- result = readl(ptr);
- result &= mask;
- if (result == done)
- return 0;
- udelay(delay);
- wait -= delay;
- } while (wait > 0);
-
- return -ETIMEDOUT;
+ return readl_poll_timeout_atomic(ptr, result,
+ ((result & mask) == done),
+ delay, wait);
}
static void __init xdbc_bios_handoff(void)
--
1.9.1
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 36+ messages in thread* [PATCH v3 02/11] usb: early: ehci-dbgp: convert to readl_poll_timeout_atomic()
2020-08-22 8:05 ` Chunfeng Yun
(?)
@ 2020-08-22 8:05 ` Chunfeng Yun
-1 siblings, 0 replies; 36+ messages in thread
From: Chunfeng Yun @ 2020-08-22 8:05 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Felipe Balbi, Matthias Brugger, Chunfeng Yun, linux-usb,
linux-kernel, linux-arm-kernel, linux-mediatek, Lee Jones,
Sergei Shtylyov, Eric W. Biederman, Petr Mladek
Use readl_poll_timeout_atomic() to simplify code
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Petr Mladek <pmladek@suse.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v2~v3: no changes
---
drivers/usb/early/ehci-dbgp.c | 15 +++++----------
1 file changed, 5 insertions(+), 10 deletions(-)
diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c
index b075dbf..45b42d8 100644
--- a/drivers/usb/early/ehci-dbgp.c
+++ b/drivers/usb/early/ehci-dbgp.c
@@ -15,6 +15,7 @@
#include <linux/console.h>
#include <linux/errno.h>
#include <linux/init.h>
+#include <linux/iopoll.h>
#include <linux/pci_regs.h>
#include <linux/pci_ids.h>
#include <linux/usb/ch9.h>
@@ -161,17 +162,11 @@ static inline u32 dbgp_pid_read_update(u32 x, u32 tok)
static int dbgp_wait_until_complete(void)
{
u32 ctrl;
- int loop = DBGP_TIMEOUT;
-
- do {
- ctrl = readl(&ehci_debug->control);
- /* Stop when the transaction is finished */
- if (ctrl & DBGP_DONE)
- break;
- udelay(1);
- } while (--loop > 0);
+ int ret;
- if (!loop)
+ ret = readl_poll_timeout_atomic(&ehci_debug->control, ctrl,
+ (ctrl & DBGP_DONE), 1, DBGP_TIMEOUT);
+ if (ret)
return -DBGP_TIMEOUT;
/*
--
1.9.1
^ permalink raw reply related [flat|nested] 36+ messages in thread* [PATCH v3 02/11] usb: early: ehci-dbgp: convert to readl_poll_timeout_atomic()
@ 2020-08-22 8:05 ` Chunfeng Yun
0 siblings, 0 replies; 36+ messages in thread
From: Chunfeng Yun @ 2020-08-22 8:05 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Felipe Balbi, Sergei Shtylyov, Petr Mladek, linux-usb,
linux-kernel, Chunfeng Yun, linux-mediatek, Eric W. Biederman,
Matthias Brugger, Lee Jones, linux-arm-kernel
Use readl_poll_timeout_atomic() to simplify code
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Petr Mladek <pmladek@suse.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v2~v3: no changes
---
drivers/usb/early/ehci-dbgp.c | 15 +++++----------
1 file changed, 5 insertions(+), 10 deletions(-)
diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c
index b075dbf..45b42d8 100644
--- a/drivers/usb/early/ehci-dbgp.c
+++ b/drivers/usb/early/ehci-dbgp.c
@@ -15,6 +15,7 @@
#include <linux/console.h>
#include <linux/errno.h>
#include <linux/init.h>
+#include <linux/iopoll.h>
#include <linux/pci_regs.h>
#include <linux/pci_ids.h>
#include <linux/usb/ch9.h>
@@ -161,17 +162,11 @@ static inline u32 dbgp_pid_read_update(u32 x, u32 tok)
static int dbgp_wait_until_complete(void)
{
u32 ctrl;
- int loop = DBGP_TIMEOUT;
-
- do {
- ctrl = readl(&ehci_debug->control);
- /* Stop when the transaction is finished */
- if (ctrl & DBGP_DONE)
- break;
- udelay(1);
- } while (--loop > 0);
+ int ret;
- if (!loop)
+ ret = readl_poll_timeout_atomic(&ehci_debug->control, ctrl,
+ (ctrl & DBGP_DONE), 1, DBGP_TIMEOUT);
+ if (ret)
return -DBGP_TIMEOUT;
/*
--
1.9.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 36+ messages in thread* [PATCH v3 02/11] usb: early: ehci-dbgp: convert to readl_poll_timeout_atomic()
@ 2020-08-22 8:05 ` Chunfeng Yun
0 siblings, 0 replies; 36+ messages in thread
From: Chunfeng Yun @ 2020-08-22 8:05 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Felipe Balbi, Sergei Shtylyov, Petr Mladek, linux-usb,
linux-kernel, Chunfeng Yun, linux-mediatek, Eric W. Biederman,
Matthias Brugger, Lee Jones, linux-arm-kernel
Use readl_poll_timeout_atomic() to simplify code
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Petr Mladek <pmladek@suse.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v2~v3: no changes
---
drivers/usb/early/ehci-dbgp.c | 15 +++++----------
1 file changed, 5 insertions(+), 10 deletions(-)
diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c
index b075dbf..45b42d8 100644
--- a/drivers/usb/early/ehci-dbgp.c
+++ b/drivers/usb/early/ehci-dbgp.c
@@ -15,6 +15,7 @@
#include <linux/console.h>
#include <linux/errno.h>
#include <linux/init.h>
+#include <linux/iopoll.h>
#include <linux/pci_regs.h>
#include <linux/pci_ids.h>
#include <linux/usb/ch9.h>
@@ -161,17 +162,11 @@ static inline u32 dbgp_pid_read_update(u32 x, u32 tok)
static int dbgp_wait_until_complete(void)
{
u32 ctrl;
- int loop = DBGP_TIMEOUT;
-
- do {
- ctrl = readl(&ehci_debug->control);
- /* Stop when the transaction is finished */
- if (ctrl & DBGP_DONE)
- break;
- udelay(1);
- } while (--loop > 0);
+ int ret;
- if (!loop)
+ ret = readl_poll_timeout_atomic(&ehci_debug->control, ctrl,
+ (ctrl & DBGP_DONE), 1, DBGP_TIMEOUT);
+ if (ret)
return -DBGP_TIMEOUT;
/*
--
1.9.1
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH v3 03/11] usb: pci-quirks: convert to readl_poll_timeout_atomic()
2020-08-22 8:05 ` Chunfeng Yun
(?)
@ 2020-08-22 8:05 ` Chunfeng Yun
-1 siblings, 0 replies; 36+ messages in thread
From: Chunfeng Yun @ 2020-08-22 8:05 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Felipe Balbi, Matthias Brugger, Chunfeng Yun, linux-usb,
linux-kernel, linux-arm-kernel, linux-mediatek, Lee Jones,
Sergei Shtylyov, Mathias Nyman
Use readl_poll_timeout_atomic() to simplify code
Cc: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v2~v3: no changes
---
drivers/usb/host/pci-quirks.c | 13 ++++---------
1 file changed, 4 insertions(+), 9 deletions(-)
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index b8961c0..8920566 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -16,6 +16,7 @@
#include <linux/export.h>
#include <linux/acpi.h>
#include <linux/dmi.h>
+#include <linux/iopoll.h>
#include <soc/bcm2835/raspberrypi-firmware.h>
@@ -1012,15 +1013,9 @@ static int handshake(void __iomem *ptr, u32 mask, u32 done,
{
u32 result;
- do {
- result = readl(ptr);
- result &= mask;
- if (result == done)
- return 0;
- udelay(delay_usec);
- wait_usec -= delay_usec;
- } while (wait_usec > 0);
- return -ETIMEDOUT;
+ return readl_poll_timeout_atomic(ptr, result,
+ ((result & mask) == done),
+ delay_usec, wait_usec);
}
/*
--
1.9.1
^ permalink raw reply related [flat|nested] 36+ messages in thread* [PATCH v3 03/11] usb: pci-quirks: convert to readl_poll_timeout_atomic()
@ 2020-08-22 8:05 ` Chunfeng Yun
0 siblings, 0 replies; 36+ messages in thread
From: Chunfeng Yun @ 2020-08-22 8:05 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Felipe Balbi, Mathias Nyman, Sergei Shtylyov, linux-usb,
linux-kernel, Chunfeng Yun, linux-mediatek, Matthias Brugger,
Lee Jones, linux-arm-kernel
Use readl_poll_timeout_atomic() to simplify code
Cc: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v2~v3: no changes
---
drivers/usb/host/pci-quirks.c | 13 ++++---------
1 file changed, 4 insertions(+), 9 deletions(-)
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index b8961c0..8920566 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -16,6 +16,7 @@
#include <linux/export.h>
#include <linux/acpi.h>
#include <linux/dmi.h>
+#include <linux/iopoll.h>
#include <soc/bcm2835/raspberrypi-firmware.h>
@@ -1012,15 +1013,9 @@ static int handshake(void __iomem *ptr, u32 mask, u32 done,
{
u32 result;
- do {
- result = readl(ptr);
- result &= mask;
- if (result == done)
- return 0;
- udelay(delay_usec);
- wait_usec -= delay_usec;
- } while (wait_usec > 0);
- return -ETIMEDOUT;
+ return readl_poll_timeout_atomic(ptr, result,
+ ((result & mask) == done),
+ delay_usec, wait_usec);
}
/*
--
1.9.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 36+ messages in thread* [PATCH v3 03/11] usb: pci-quirks: convert to readl_poll_timeout_atomic()
@ 2020-08-22 8:05 ` Chunfeng Yun
0 siblings, 0 replies; 36+ messages in thread
From: Chunfeng Yun @ 2020-08-22 8:05 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Felipe Balbi, Mathias Nyman, Sergei Shtylyov, linux-usb,
linux-kernel, Chunfeng Yun, linux-mediatek, Matthias Brugger,
Lee Jones, linux-arm-kernel
Use readl_poll_timeout_atomic() to simplify code
Cc: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v2~v3: no changes
---
drivers/usb/host/pci-quirks.c | 13 ++++---------
1 file changed, 4 insertions(+), 9 deletions(-)
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index b8961c0..8920566 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -16,6 +16,7 @@
#include <linux/export.h>
#include <linux/acpi.h>
#include <linux/dmi.h>
+#include <linux/iopoll.h>
#include <soc/bcm2835/raspberrypi-firmware.h>
@@ -1012,15 +1013,9 @@ static int handshake(void __iomem *ptr, u32 mask, u32 done,
{
u32 result;
- do {
- result = readl(ptr);
- result &= mask;
- if (result == done)
- return 0;
- udelay(delay_usec);
- wait_usec -= delay_usec;
- } while (wait_usec > 0);
- return -ETIMEDOUT;
+ return readl_poll_timeout_atomic(ptr, result,
+ ((result & mask) == done),
+ delay_usec, wait_usec);
}
/*
--
1.9.1
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH v3 04/11] usb: xhci-rcar: convert to readl_poll_timeout_atomic()
2020-08-22 8:05 ` Chunfeng Yun
(?)
@ 2020-08-22 8:05 ` Chunfeng Yun
-1 siblings, 0 replies; 36+ messages in thread
From: Chunfeng Yun @ 2020-08-22 8:05 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Felipe Balbi, Matthias Brugger, Chunfeng Yun, linux-usb,
linux-kernel, linux-arm-kernel, linux-mediatek, Lee Jones,
Sergei Shtylyov, Mathias Nyman, Yoshihiro Shimoda
Use readl_poll_timeout_atomic() to simplify code
Cc: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v2~v3: no changes
---
drivers/usb/host/xhci-rcar.c | 43 ++++++++++++-------------------------------
1 file changed, 12 insertions(+), 31 deletions(-)
diff --git a/drivers/usb/host/xhci-rcar.c b/drivers/usb/host/xhci-rcar.c
index c1025d3..74f836f 100644
--- a/drivers/usb/host/xhci-rcar.c
+++ b/drivers/usb/host/xhci-rcar.c
@@ -6,6 +6,7 @@
*/
#include <linux/firmware.h>
+#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/of.h>
@@ -127,8 +128,7 @@ static int xhci_rcar_download_firmware(struct usb_hcd *hcd)
void __iomem *regs = hcd->regs;
struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
const struct firmware *fw;
- int retval, index, j, time;
- int timeout = 10000;
+ int retval, index, j;
u32 data, val, temp;
u32 quirks = 0;
const struct soc_device_attribute *attr;
@@ -166,32 +166,19 @@ static int xhci_rcar_download_firmware(struct usb_hcd *hcd)
temp |= RCAR_USB3_DL_CTRL_FW_SET_DATA0;
writel(temp, regs + RCAR_USB3_DL_CTRL);
- for (time = 0; time < timeout; time++) {
- val = readl(regs + RCAR_USB3_DL_CTRL);
- if ((val & RCAR_USB3_DL_CTRL_FW_SET_DATA0) == 0)
- break;
- udelay(1);
- }
- if (time == timeout) {
- retval = -ETIMEDOUT;
+ retval = readl_poll_timeout_atomic(regs + RCAR_USB3_DL_CTRL,
+ val, !(val & RCAR_USB3_DL_CTRL_FW_SET_DATA0),
+ 1, 10000);
+ if (retval < 0)
break;
- }
}
temp = readl(regs + RCAR_USB3_DL_CTRL);
temp &= ~RCAR_USB3_DL_CTRL_ENABLE;
writel(temp, regs + RCAR_USB3_DL_CTRL);
- for (time = 0; time < timeout; time++) {
- val = readl(regs + RCAR_USB3_DL_CTRL);
- if (val & RCAR_USB3_DL_CTRL_FW_SUCCESS) {
- retval = 0;
- break;
- }
- udelay(1);
- }
- if (time == timeout)
- retval = -ETIMEDOUT;
+ retval = readl_poll_timeout_atomic((regs + RCAR_USB3_DL_CTRL),
+ val, (val & RCAR_USB3_DL_CTRL_FW_SUCCESS), 1, 10000);
release_firmware(fw);
@@ -200,18 +187,12 @@ static int xhci_rcar_download_firmware(struct usb_hcd *hcd)
static bool xhci_rcar_wait_for_pll_active(struct usb_hcd *hcd)
{
- int timeout = 1000;
+ int retval;
u32 val, mask = RCAR_USB3_AXH_STA_PLL_ACTIVE_MASK;
- while (timeout > 0) {
- val = readl(hcd->regs + RCAR_USB3_AXH_STA);
- if ((val & mask) == mask)
- return true;
- udelay(1);
- timeout--;
- }
-
- return false;
+ retval = readl_poll_timeout_atomic(hcd->regs + RCAR_USB3_AXH_STA,
+ val, ((val & mask) == mask), 1, 1000);
+ return !!retval;
}
/* This function needs to initialize a "phy" of usb before */
--
1.9.1
^ permalink raw reply related [flat|nested] 36+ messages in thread* [PATCH v3 04/11] usb: xhci-rcar: convert to readl_poll_timeout_atomic()
@ 2020-08-22 8:05 ` Chunfeng Yun
0 siblings, 0 replies; 36+ messages in thread
From: Chunfeng Yun @ 2020-08-22 8:05 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Felipe Balbi, Mathias Nyman, Sergei Shtylyov, Yoshihiro Shimoda,
linux-usb, linux-kernel, Chunfeng Yun, linux-mediatek,
Matthias Brugger, Lee Jones, linux-arm-kernel
Use readl_poll_timeout_atomic() to simplify code
Cc: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v2~v3: no changes
---
drivers/usb/host/xhci-rcar.c | 43 ++++++++++++-------------------------------
1 file changed, 12 insertions(+), 31 deletions(-)
diff --git a/drivers/usb/host/xhci-rcar.c b/drivers/usb/host/xhci-rcar.c
index c1025d3..74f836f 100644
--- a/drivers/usb/host/xhci-rcar.c
+++ b/drivers/usb/host/xhci-rcar.c
@@ -6,6 +6,7 @@
*/
#include <linux/firmware.h>
+#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/of.h>
@@ -127,8 +128,7 @@ static int xhci_rcar_download_firmware(struct usb_hcd *hcd)
void __iomem *regs = hcd->regs;
struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
const struct firmware *fw;
- int retval, index, j, time;
- int timeout = 10000;
+ int retval, index, j;
u32 data, val, temp;
u32 quirks = 0;
const struct soc_device_attribute *attr;
@@ -166,32 +166,19 @@ static int xhci_rcar_download_firmware(struct usb_hcd *hcd)
temp |= RCAR_USB3_DL_CTRL_FW_SET_DATA0;
writel(temp, regs + RCAR_USB3_DL_CTRL);
- for (time = 0; time < timeout; time++) {
- val = readl(regs + RCAR_USB3_DL_CTRL);
- if ((val & RCAR_USB3_DL_CTRL_FW_SET_DATA0) == 0)
- break;
- udelay(1);
- }
- if (time == timeout) {
- retval = -ETIMEDOUT;
+ retval = readl_poll_timeout_atomic(regs + RCAR_USB3_DL_CTRL,
+ val, !(val & RCAR_USB3_DL_CTRL_FW_SET_DATA0),
+ 1, 10000);
+ if (retval < 0)
break;
- }
}
temp = readl(regs + RCAR_USB3_DL_CTRL);
temp &= ~RCAR_USB3_DL_CTRL_ENABLE;
writel(temp, regs + RCAR_USB3_DL_CTRL);
- for (time = 0; time < timeout; time++) {
- val = readl(regs + RCAR_USB3_DL_CTRL);
- if (val & RCAR_USB3_DL_CTRL_FW_SUCCESS) {
- retval = 0;
- break;
- }
- udelay(1);
- }
- if (time == timeout)
- retval = -ETIMEDOUT;
+ retval = readl_poll_timeout_atomic((regs + RCAR_USB3_DL_CTRL),
+ val, (val & RCAR_USB3_DL_CTRL_FW_SUCCESS), 1, 10000);
release_firmware(fw);
@@ -200,18 +187,12 @@ static int xhci_rcar_download_firmware(struct usb_hcd *hcd)
static bool xhci_rcar_wait_for_pll_active(struct usb_hcd *hcd)
{
- int timeout = 1000;
+ int retval;
u32 val, mask = RCAR_USB3_AXH_STA_PLL_ACTIVE_MASK;
- while (timeout > 0) {
- val = readl(hcd->regs + RCAR_USB3_AXH_STA);
- if ((val & mask) == mask)
- return true;
- udelay(1);
- timeout--;
- }
-
- return false;
+ retval = readl_poll_timeout_atomic(hcd->regs + RCAR_USB3_AXH_STA,
+ val, ((val & mask) == mask), 1, 1000);
+ return !!retval;
}
/* This function needs to initialize a "phy" of usb before */
--
1.9.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 36+ messages in thread* [PATCH v3 04/11] usb: xhci-rcar: convert to readl_poll_timeout_atomic()
@ 2020-08-22 8:05 ` Chunfeng Yun
0 siblings, 0 replies; 36+ messages in thread
From: Chunfeng Yun @ 2020-08-22 8:05 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Felipe Balbi, Mathias Nyman, Sergei Shtylyov, Yoshihiro Shimoda,
linux-usb, linux-kernel, Chunfeng Yun, linux-mediatek,
Matthias Brugger, Lee Jones, linux-arm-kernel
Use readl_poll_timeout_atomic() to simplify code
Cc: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v2~v3: no changes
---
drivers/usb/host/xhci-rcar.c | 43 ++++++++++++-------------------------------
1 file changed, 12 insertions(+), 31 deletions(-)
diff --git a/drivers/usb/host/xhci-rcar.c b/drivers/usb/host/xhci-rcar.c
index c1025d3..74f836f 100644
--- a/drivers/usb/host/xhci-rcar.c
+++ b/drivers/usb/host/xhci-rcar.c
@@ -6,6 +6,7 @@
*/
#include <linux/firmware.h>
+#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/of.h>
@@ -127,8 +128,7 @@ static int xhci_rcar_download_firmware(struct usb_hcd *hcd)
void __iomem *regs = hcd->regs;
struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
const struct firmware *fw;
- int retval, index, j, time;
- int timeout = 10000;
+ int retval, index, j;
u32 data, val, temp;
u32 quirks = 0;
const struct soc_device_attribute *attr;
@@ -166,32 +166,19 @@ static int xhci_rcar_download_firmware(struct usb_hcd *hcd)
temp |= RCAR_USB3_DL_CTRL_FW_SET_DATA0;
writel(temp, regs + RCAR_USB3_DL_CTRL);
- for (time = 0; time < timeout; time++) {
- val = readl(regs + RCAR_USB3_DL_CTRL);
- if ((val & RCAR_USB3_DL_CTRL_FW_SET_DATA0) == 0)
- break;
- udelay(1);
- }
- if (time == timeout) {
- retval = -ETIMEDOUT;
+ retval = readl_poll_timeout_atomic(regs + RCAR_USB3_DL_CTRL,
+ val, !(val & RCAR_USB3_DL_CTRL_FW_SET_DATA0),
+ 1, 10000);
+ if (retval < 0)
break;
- }
}
temp = readl(regs + RCAR_USB3_DL_CTRL);
temp &= ~RCAR_USB3_DL_CTRL_ENABLE;
writel(temp, regs + RCAR_USB3_DL_CTRL);
- for (time = 0; time < timeout; time++) {
- val = readl(regs + RCAR_USB3_DL_CTRL);
- if (val & RCAR_USB3_DL_CTRL_FW_SUCCESS) {
- retval = 0;
- break;
- }
- udelay(1);
- }
- if (time == timeout)
- retval = -ETIMEDOUT;
+ retval = readl_poll_timeout_atomic((regs + RCAR_USB3_DL_CTRL),
+ val, (val & RCAR_USB3_DL_CTRL_FW_SUCCESS), 1, 10000);
release_firmware(fw);
@@ -200,18 +187,12 @@ static int xhci_rcar_download_firmware(struct usb_hcd *hcd)
static bool xhci_rcar_wait_for_pll_active(struct usb_hcd *hcd)
{
- int timeout = 1000;
+ int retval;
u32 val, mask = RCAR_USB3_AXH_STA_PLL_ACTIVE_MASK;
- while (timeout > 0) {
- val = readl(hcd->regs + RCAR_USB3_AXH_STA);
- if ((val & mask) == mask)
- return true;
- udelay(1);
- timeout--;
- }
-
- return false;
+ retval = readl_poll_timeout_atomic(hcd->regs + RCAR_USB3_AXH_STA,
+ val, ((val & mask) == mask), 1, 1000);
+ return !!retval;
}
/* This function needs to initialize a "phy" of usb before */
--
1.9.1
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH v3 05/11] usb: oxu210hp-hcd: convert to readl_poll_timeout_atomic()
2020-08-22 8:05 ` Chunfeng Yun
(?)
@ 2020-08-22 8:05 ` Chunfeng Yun
-1 siblings, 0 replies; 36+ messages in thread
From: Chunfeng Yun @ 2020-08-22 8:05 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Felipe Balbi, Matthias Brugger, Chunfeng Yun, linux-usb,
linux-kernel, linux-arm-kernel, linux-mediatek, Lee Jones,
Sergei Shtylyov
Use readl_poll_timeout_atomic() to simplify code
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v2~v3: no changes
---
drivers/usb/host/oxu210hp-hcd.c | 21 ++++++++++-----------
1 file changed, 10 insertions(+), 11 deletions(-)
diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index cfa7dd2..27dbbe1 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -24,6 +24,7 @@
#include <linux/moduleparam.h>
#include <linux/dma-mapping.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <asm/irq.h>
#include <asm/unaligned.h>
@@ -748,18 +749,16 @@ static int handshake(struct oxu_hcd *oxu, void __iomem *ptr,
u32 mask, u32 done, int usec)
{
u32 result;
+ int ret;
- do {
- result = readl(ptr);
- if (result == ~(u32)0) /* card removed */
- return -ENODEV;
- result &= mask;
- if (result == done)
- return 0;
- udelay(1);
- usec--;
- } while (usec > 0);
- return -ETIMEDOUT;
+ ret = readl_poll_timeout_atomic(ptr, result,
+ ((result & mask) == done ||
+ result == U32_MAX),
+ 1, usec);
+ if (result == U32_MAX) /* card removed */
+ return -ENODEV;
+
+ return ret;
}
/* Force HC to halt state from unknown (EHCI spec section 2.3) */
--
1.9.1
^ permalink raw reply related [flat|nested] 36+ messages in thread* [PATCH v3 05/11] usb: oxu210hp-hcd: convert to readl_poll_timeout_atomic()
@ 2020-08-22 8:05 ` Chunfeng Yun
0 siblings, 0 replies; 36+ messages in thread
From: Chunfeng Yun @ 2020-08-22 8:05 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Felipe Balbi, Sergei Shtylyov, linux-usb, linux-kernel,
Chunfeng Yun, linux-mediatek, Matthias Brugger, Lee Jones,
linux-arm-kernel
Use readl_poll_timeout_atomic() to simplify code
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v2~v3: no changes
---
drivers/usb/host/oxu210hp-hcd.c | 21 ++++++++++-----------
1 file changed, 10 insertions(+), 11 deletions(-)
diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index cfa7dd2..27dbbe1 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -24,6 +24,7 @@
#include <linux/moduleparam.h>
#include <linux/dma-mapping.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <asm/irq.h>
#include <asm/unaligned.h>
@@ -748,18 +749,16 @@ static int handshake(struct oxu_hcd *oxu, void __iomem *ptr,
u32 mask, u32 done, int usec)
{
u32 result;
+ int ret;
- do {
- result = readl(ptr);
- if (result == ~(u32)0) /* card removed */
- return -ENODEV;
- result &= mask;
- if (result == done)
- return 0;
- udelay(1);
- usec--;
- } while (usec > 0);
- return -ETIMEDOUT;
+ ret = readl_poll_timeout_atomic(ptr, result,
+ ((result & mask) == done ||
+ result == U32_MAX),
+ 1, usec);
+ if (result == U32_MAX) /* card removed */
+ return -ENODEV;
+
+ return ret;
}
/* Force HC to halt state from unknown (EHCI spec section 2.3) */
--
1.9.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 36+ messages in thread* [PATCH v3 05/11] usb: oxu210hp-hcd: convert to readl_poll_timeout_atomic()
@ 2020-08-22 8:05 ` Chunfeng Yun
0 siblings, 0 replies; 36+ messages in thread
From: Chunfeng Yun @ 2020-08-22 8:05 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Felipe Balbi, Sergei Shtylyov, linux-usb, linux-kernel,
Chunfeng Yun, linux-mediatek, Matthias Brugger, Lee Jones,
linux-arm-kernel
Use readl_poll_timeout_atomic() to simplify code
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v2~v3: no changes
---
drivers/usb/host/oxu210hp-hcd.c | 21 ++++++++++-----------
1 file changed, 10 insertions(+), 11 deletions(-)
diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index cfa7dd2..27dbbe1 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -24,6 +24,7 @@
#include <linux/moduleparam.h>
#include <linux/dma-mapping.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <asm/irq.h>
#include <asm/unaligned.h>
@@ -748,18 +749,16 @@ static int handshake(struct oxu_hcd *oxu, void __iomem *ptr,
u32 mask, u32 done, int usec)
{
u32 result;
+ int ret;
- do {
- result = readl(ptr);
- if (result == ~(u32)0) /* card removed */
- return -ENODEV;
- result &= mask;
- if (result == done)
- return 0;
- udelay(1);
- usec--;
- } while (usec > 0);
- return -ETIMEDOUT;
+ ret = readl_poll_timeout_atomic(ptr, result,
+ ((result & mask) == done ||
+ result == U32_MAX),
+ 1, usec);
+ if (result == U32_MAX) /* card removed */
+ return -ENODEV;
+
+ return ret;
}
/* Force HC to halt state from unknown (EHCI spec section 2.3) */
--
1.9.1
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH v3 06/11] usb: fotg210-hcd: convert to readl_poll_timeout_atomic()
2020-08-22 8:05 ` Chunfeng Yun
(?)
@ 2020-08-22 8:05 ` Chunfeng Yun
-1 siblings, 0 replies; 36+ messages in thread
From: Chunfeng Yun @ 2020-08-22 8:05 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Felipe Balbi, Matthias Brugger, Chunfeng Yun, linux-usb,
linux-kernel, linux-arm-kernel, linux-mediatek, Lee Jones,
Sergei Shtylyov
Use readl_poll_timeout_atomic() to simplify code
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v2~v3: no changes
---
drivers/usb/host/fotg210-hcd.c | 20 +++++++++-----------
1 file changed, 9 insertions(+), 11 deletions(-)
diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c
index 194df82..1d94fcf 100644
--- a/drivers/usb/host/fotg210-hcd.c
+++ b/drivers/usb/host/fotg210-hcd.c
@@ -32,6 +32,7 @@
#include <linux/uaccess.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/clk.h>
#include <asm/byteorder.h>
@@ -883,18 +884,15 @@ static int handshake(struct fotg210_hcd *fotg210, void __iomem *ptr,
u32 mask, u32 done, int usec)
{
u32 result;
+ int ret;
- do {
- result = fotg210_readl(fotg210, ptr);
- if (result == ~(u32)0) /* card removed */
- return -ENODEV;
- result &= mask;
- if (result == done)
- return 0;
- udelay(1);
- usec--;
- } while (usec > 0);
- return -ETIMEDOUT;
+ ret = readl_poll_timeout_atomic(ptr, result,
+ ((result & mask) == done ||
+ result == U32_MAX), 1, usec);
+ if (result == U32_MAX) /* card removed */
+ return -ENODEV;
+
+ return ret;
}
/* Force HC to halt state from unknown (EHCI spec section 2.3).
--
1.9.1
^ permalink raw reply related [flat|nested] 36+ messages in thread* [PATCH v3 06/11] usb: fotg210-hcd: convert to readl_poll_timeout_atomic()
@ 2020-08-22 8:05 ` Chunfeng Yun
0 siblings, 0 replies; 36+ messages in thread
From: Chunfeng Yun @ 2020-08-22 8:05 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Felipe Balbi, Sergei Shtylyov, linux-usb, linux-kernel,
Chunfeng Yun, linux-mediatek, Matthias Brugger, Lee Jones,
linux-arm-kernel
Use readl_poll_timeout_atomic() to simplify code
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v2~v3: no changes
---
drivers/usb/host/fotg210-hcd.c | 20 +++++++++-----------
1 file changed, 9 insertions(+), 11 deletions(-)
diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c
index 194df82..1d94fcf 100644
--- a/drivers/usb/host/fotg210-hcd.c
+++ b/drivers/usb/host/fotg210-hcd.c
@@ -32,6 +32,7 @@
#include <linux/uaccess.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/clk.h>
#include <asm/byteorder.h>
@@ -883,18 +884,15 @@ static int handshake(struct fotg210_hcd *fotg210, void __iomem *ptr,
u32 mask, u32 done, int usec)
{
u32 result;
+ int ret;
- do {
- result = fotg210_readl(fotg210, ptr);
- if (result == ~(u32)0) /* card removed */
- return -ENODEV;
- result &= mask;
- if (result == done)
- return 0;
- udelay(1);
- usec--;
- } while (usec > 0);
- return -ETIMEDOUT;
+ ret = readl_poll_timeout_atomic(ptr, result,
+ ((result & mask) == done ||
+ result == U32_MAX), 1, usec);
+ if (result == U32_MAX) /* card removed */
+ return -ENODEV;
+
+ return ret;
}
/* Force HC to halt state from unknown (EHCI spec section 2.3).
--
1.9.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 36+ messages in thread* [PATCH v3 06/11] usb: fotg210-hcd: convert to readl_poll_timeout_atomic()
@ 2020-08-22 8:05 ` Chunfeng Yun
0 siblings, 0 replies; 36+ messages in thread
From: Chunfeng Yun @ 2020-08-22 8:05 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Felipe Balbi, Sergei Shtylyov, linux-usb, linux-kernel,
Chunfeng Yun, linux-mediatek, Matthias Brugger, Lee Jones,
linux-arm-kernel
Use readl_poll_timeout_atomic() to simplify code
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v2~v3: no changes
---
drivers/usb/host/fotg210-hcd.c | 20 +++++++++-----------
1 file changed, 9 insertions(+), 11 deletions(-)
diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c
index 194df82..1d94fcf 100644
--- a/drivers/usb/host/fotg210-hcd.c
+++ b/drivers/usb/host/fotg210-hcd.c
@@ -32,6 +32,7 @@
#include <linux/uaccess.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/clk.h>
#include <asm/byteorder.h>
@@ -883,18 +884,15 @@ static int handshake(struct fotg210_hcd *fotg210, void __iomem *ptr,
u32 mask, u32 done, int usec)
{
u32 result;
+ int ret;
- do {
- result = fotg210_readl(fotg210, ptr);
- if (result == ~(u32)0) /* card removed */
- return -ENODEV;
- result &= mask;
- if (result == done)
- return 0;
- udelay(1);
- usec--;
- } while (usec > 0);
- return -ETIMEDOUT;
+ ret = readl_poll_timeout_atomic(ptr, result,
+ ((result & mask) == done ||
+ result == U32_MAX), 1, usec);
+ if (result == U32_MAX) /* card removed */
+ return -ENODEV;
+
+ return ret;
}
/* Force HC to halt state from unknown (EHCI spec section 2.3).
--
1.9.1
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH v3 07/11] usb: isp1760-hcd: convert to readl_poll_timeout_atomic()
2020-08-22 8:05 ` Chunfeng Yun
(?)
@ 2020-08-22 8:05 ` Chunfeng Yun
-1 siblings, 0 replies; 36+ messages in thread
From: Chunfeng Yun @ 2020-08-22 8:05 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Felipe Balbi, Matthias Brugger, Chunfeng Yun, linux-usb,
linux-kernel, linux-arm-kernel, linux-mediatek, Lee Jones,
Sergei Shtylyov
Use readl_poll_timeout_atomic() to simplify code
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v2~v3: no changes
---
drivers/usb/isp1760/isp1760-hcd.c | 20 +++++++++-----------
1 file changed, 9 insertions(+), 11 deletions(-)
diff --git a/drivers/usb/isp1760/isp1760-hcd.c b/drivers/usb/isp1760/isp1760-hcd.c
index dd74ab7a..33ae656 100644
--- a/drivers/usb/isp1760/isp1760-hcd.c
+++ b/drivers/usb/isp1760/isp1760-hcd.c
@@ -22,6 +22,7 @@
#include <linux/debugfs.h>
#include <linux/uaccess.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/mm.h>
#include <linux/timer.h>
#include <asm/unaligned.h>
@@ -380,18 +381,15 @@ static int handshake(struct usb_hcd *hcd, u32 reg,
u32 mask, u32 done, int usec)
{
u32 result;
+ int ret;
+
+ ret = readl_poll_timeout_atomic(hcd->regs + reg, result,
+ ((result & mask) == done ||
+ result == U32_MAX), 1, usec);
+ if (result == U32_MAX)
+ return -ENODEV;
- do {
- result = reg_read32(hcd->regs, reg);
- if (result == ~0)
- return -ENODEV;
- result &= mask;
- if (result == done)
- return 0;
- udelay(1);
- usec--;
- } while (usec > 0);
- return -ETIMEDOUT;
+ return ret;
}
/* reset a non-running (STS_HALT == 1) controller */
--
1.9.1
^ permalink raw reply related [flat|nested] 36+ messages in thread* [PATCH v3 07/11] usb: isp1760-hcd: convert to readl_poll_timeout_atomic()
@ 2020-08-22 8:05 ` Chunfeng Yun
0 siblings, 0 replies; 36+ messages in thread
From: Chunfeng Yun @ 2020-08-22 8:05 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Felipe Balbi, Sergei Shtylyov, linux-usb, linux-kernel,
Chunfeng Yun, linux-mediatek, Matthias Brugger, Lee Jones,
linux-arm-kernel
Use readl_poll_timeout_atomic() to simplify code
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v2~v3: no changes
---
drivers/usb/isp1760/isp1760-hcd.c | 20 +++++++++-----------
1 file changed, 9 insertions(+), 11 deletions(-)
diff --git a/drivers/usb/isp1760/isp1760-hcd.c b/drivers/usb/isp1760/isp1760-hcd.c
index dd74ab7a..33ae656 100644
--- a/drivers/usb/isp1760/isp1760-hcd.c
+++ b/drivers/usb/isp1760/isp1760-hcd.c
@@ -22,6 +22,7 @@
#include <linux/debugfs.h>
#include <linux/uaccess.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/mm.h>
#include <linux/timer.h>
#include <asm/unaligned.h>
@@ -380,18 +381,15 @@ static int handshake(struct usb_hcd *hcd, u32 reg,
u32 mask, u32 done, int usec)
{
u32 result;
+ int ret;
+
+ ret = readl_poll_timeout_atomic(hcd->regs + reg, result,
+ ((result & mask) == done ||
+ result == U32_MAX), 1, usec);
+ if (result == U32_MAX)
+ return -ENODEV;
- do {
- result = reg_read32(hcd->regs, reg);
- if (result == ~0)
- return -ENODEV;
- result &= mask;
- if (result == done)
- return 0;
- udelay(1);
- usec--;
- } while (usec > 0);
- return -ETIMEDOUT;
+ return ret;
}
/* reset a non-running (STS_HALT == 1) controller */
--
1.9.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 36+ messages in thread* [PATCH v3 07/11] usb: isp1760-hcd: convert to readl_poll_timeout_atomic()
@ 2020-08-22 8:05 ` Chunfeng Yun
0 siblings, 0 replies; 36+ messages in thread
From: Chunfeng Yun @ 2020-08-22 8:05 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Felipe Balbi, Sergei Shtylyov, linux-usb, linux-kernel,
Chunfeng Yun, linux-mediatek, Matthias Brugger, Lee Jones,
linux-arm-kernel
Use readl_poll_timeout_atomic() to simplify code
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v2~v3: no changes
---
drivers/usb/isp1760/isp1760-hcd.c | 20 +++++++++-----------
1 file changed, 9 insertions(+), 11 deletions(-)
diff --git a/drivers/usb/isp1760/isp1760-hcd.c b/drivers/usb/isp1760/isp1760-hcd.c
index dd74ab7a..33ae656 100644
--- a/drivers/usb/isp1760/isp1760-hcd.c
+++ b/drivers/usb/isp1760/isp1760-hcd.c
@@ -22,6 +22,7 @@
#include <linux/debugfs.h>
#include <linux/uaccess.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/mm.h>
#include <linux/timer.h>
#include <asm/unaligned.h>
@@ -380,18 +381,15 @@ static int handshake(struct usb_hcd *hcd, u32 reg,
u32 mask, u32 done, int usec)
{
u32 result;
+ int ret;
+
+ ret = readl_poll_timeout_atomic(hcd->regs + reg, result,
+ ((result & mask) == done ||
+ result == U32_MAX), 1, usec);
+ if (result == U32_MAX)
+ return -ENODEV;
- do {
- result = reg_read32(hcd->regs, reg);
- if (result == ~0)
- return -ENODEV;
- result &= mask;
- if (result == done)
- return 0;
- udelay(1);
- usec--;
- } while (usec > 0);
- return -ETIMEDOUT;
+ return ret;
}
/* reset a non-running (STS_HALT == 1) controller */
--
1.9.1
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH v3 08/11] usb: phy-ulpi-viewport: convert to readl_poll_timeout_atomic()
2020-08-22 8:05 ` Chunfeng Yun
(?)
@ 2020-08-22 8:05 ` Chunfeng Yun
-1 siblings, 0 replies; 36+ messages in thread
From: Chunfeng Yun @ 2020-08-22 8:05 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Felipe Balbi, Matthias Brugger, Chunfeng Yun, linux-usb,
linux-kernel, linux-arm-kernel, linux-mediatek, Lee Jones,
Sergei Shtylyov
Use readl_poll_timeout_atomic() to simplify code
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v2~v3: no changes
---
drivers/usb/phy/phy-ulpi-viewport.c | 12 +++---------
1 file changed, 3 insertions(+), 9 deletions(-)
diff --git a/drivers/usb/phy/phy-ulpi-viewport.c b/drivers/usb/phy/phy-ulpi-viewport.c
index 7a14e0e..0f61e32 100644
--- a/drivers/usb/phy/phy-ulpi-viewport.c
+++ b/drivers/usb/phy/phy-ulpi-viewport.c
@@ -7,6 +7,7 @@
#include <linux/kernel.h>
#include <linux/usb.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
@@ -20,16 +21,9 @@
static int ulpi_viewport_wait(void __iomem *view, u32 mask)
{
- unsigned long usec = 2000;
+ u32 val;
- while (usec--) {
- if (!(readl(view) & mask))
- return 0;
-
- udelay(1);
- }
-
- return -ETIMEDOUT;
+ return readl_poll_timeout_atomic(view, val, !(val & mask), 1, 2000);
}
static int ulpi_viewport_read(struct usb_phy *otg, u32 reg)
--
1.9.1
^ permalink raw reply related [flat|nested] 36+ messages in thread* [PATCH v3 08/11] usb: phy-ulpi-viewport: convert to readl_poll_timeout_atomic()
@ 2020-08-22 8:05 ` Chunfeng Yun
0 siblings, 0 replies; 36+ messages in thread
From: Chunfeng Yun @ 2020-08-22 8:05 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Felipe Balbi, Sergei Shtylyov, linux-usb, linux-kernel,
Chunfeng Yun, linux-mediatek, Matthias Brugger, Lee Jones,
linux-arm-kernel
Use readl_poll_timeout_atomic() to simplify code
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v2~v3: no changes
---
drivers/usb/phy/phy-ulpi-viewport.c | 12 +++---------
1 file changed, 3 insertions(+), 9 deletions(-)
diff --git a/drivers/usb/phy/phy-ulpi-viewport.c b/drivers/usb/phy/phy-ulpi-viewport.c
index 7a14e0e..0f61e32 100644
--- a/drivers/usb/phy/phy-ulpi-viewport.c
+++ b/drivers/usb/phy/phy-ulpi-viewport.c
@@ -7,6 +7,7 @@
#include <linux/kernel.h>
#include <linux/usb.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
@@ -20,16 +21,9 @@
static int ulpi_viewport_wait(void __iomem *view, u32 mask)
{
- unsigned long usec = 2000;
+ u32 val;
- while (usec--) {
- if (!(readl(view) & mask))
- return 0;
-
- udelay(1);
- }
-
- return -ETIMEDOUT;
+ return readl_poll_timeout_atomic(view, val, !(val & mask), 1, 2000);
}
static int ulpi_viewport_read(struct usb_phy *otg, u32 reg)
--
1.9.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 36+ messages in thread* [PATCH v3 08/11] usb: phy-ulpi-viewport: convert to readl_poll_timeout_atomic()
@ 2020-08-22 8:05 ` Chunfeng Yun
0 siblings, 0 replies; 36+ messages in thread
From: Chunfeng Yun @ 2020-08-22 8:05 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Felipe Balbi, Sergei Shtylyov, linux-usb, linux-kernel,
Chunfeng Yun, linux-mediatek, Matthias Brugger, Lee Jones,
linux-arm-kernel
Use readl_poll_timeout_atomic() to simplify code
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v2~v3: no changes
---
drivers/usb/phy/phy-ulpi-viewport.c | 12 +++---------
1 file changed, 3 insertions(+), 9 deletions(-)
diff --git a/drivers/usb/phy/phy-ulpi-viewport.c b/drivers/usb/phy/phy-ulpi-viewport.c
index 7a14e0e..0f61e32 100644
--- a/drivers/usb/phy/phy-ulpi-viewport.c
+++ b/drivers/usb/phy/phy-ulpi-viewport.c
@@ -7,6 +7,7 @@
#include <linux/kernel.h>
#include <linux/usb.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
@@ -20,16 +21,9 @@
static int ulpi_viewport_wait(void __iomem *view, u32 mask)
{
- unsigned long usec = 2000;
+ u32 val;
- while (usec--) {
- if (!(readl(view) & mask))
- return 0;
-
- udelay(1);
- }
-
- return -ETIMEDOUT;
+ return readl_poll_timeout_atomic(view, val, !(val & mask), 1, 2000);
}
static int ulpi_viewport_read(struct usb_phy *otg, u32 reg)
--
1.9.1
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH v3 09/11] usb: phy: phy-mv-usb: convert to readl_poll_timeout_atomic()
2020-08-22 8:05 ` Chunfeng Yun
(?)
@ 2020-08-22 8:05 ` Chunfeng Yun
-1 siblings, 0 replies; 36+ messages in thread
From: Chunfeng Yun @ 2020-08-22 8:05 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Felipe Balbi, Matthias Brugger, Chunfeng Yun, linux-usb,
linux-kernel, linux-arm-kernel, linux-mediatek, Lee Jones,
Sergei Shtylyov
Use readl_poll_timeout_atomic() to simplify code
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v3: re-align argument of log suggested by Sergei
v2: udelay 10us instead of 20us according to kerneldoc
---
drivers/usb/phy/phy-mv-usb.c | 18 ++++++++----------
1 file changed, 8 insertions(+), 10 deletions(-)
diff --git a/drivers/usb/phy/phy-mv-usb.c b/drivers/usb/phy/phy-mv-usb.c
index ce767ec..576d925 100644
--- a/drivers/usb/phy/phy-mv-usb.c
+++ b/drivers/usb/phy/phy-mv-usb.c
@@ -8,6 +8,7 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/uaccess.h>
#include <linux/device.h>
#include <linux/proc_fs.h>
@@ -135,8 +136,8 @@ static int mv_otg_set_timer(struct mv_otg *mvotg, unsigned int id,
static int mv_otg_reset(struct mv_otg *mvotg)
{
- unsigned int loops;
u32 tmp;
+ int ret;
/* Stop the controller */
tmp = readl(&mvotg->op_regs->usbcmd);
@@ -146,15 +147,12 @@ static int mv_otg_reset(struct mv_otg *mvotg)
/* Reset the controller to get default values */
writel(USBCMD_CTRL_RESET, &mvotg->op_regs->usbcmd);
- loops = 500;
- while (readl(&mvotg->op_regs->usbcmd) & USBCMD_CTRL_RESET) {
- if (loops == 0) {
- dev_err(&mvotg->pdev->dev,
- "Wait for RESET completed TIMEOUT\n");
- return -ETIMEDOUT;
- }
- loops--;
- udelay(20);
+ ret = readl_poll_timeout_atomic(&mvotg->op_regs->usbcmd, tmp,
+ (tmp & USBCMD_CTRL_RESET), 10, 10000);
+ if (ret < 0) {
+ dev_err(&mvotg->pdev->dev,
+ "Wait for RESET completed TIMEOUT\n");
+ return ret;
}
writel(0x0, &mvotg->op_regs->usbintr);
--
1.9.1
^ permalink raw reply related [flat|nested] 36+ messages in thread* [PATCH v3 09/11] usb: phy: phy-mv-usb: convert to readl_poll_timeout_atomic()
@ 2020-08-22 8:05 ` Chunfeng Yun
0 siblings, 0 replies; 36+ messages in thread
From: Chunfeng Yun @ 2020-08-22 8:05 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Felipe Balbi, Sergei Shtylyov, linux-usb, linux-kernel,
Chunfeng Yun, linux-mediatek, Matthias Brugger, Lee Jones,
linux-arm-kernel
Use readl_poll_timeout_atomic() to simplify code
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v3: re-align argument of log suggested by Sergei
v2: udelay 10us instead of 20us according to kerneldoc
---
drivers/usb/phy/phy-mv-usb.c | 18 ++++++++----------
1 file changed, 8 insertions(+), 10 deletions(-)
diff --git a/drivers/usb/phy/phy-mv-usb.c b/drivers/usb/phy/phy-mv-usb.c
index ce767ec..576d925 100644
--- a/drivers/usb/phy/phy-mv-usb.c
+++ b/drivers/usb/phy/phy-mv-usb.c
@@ -8,6 +8,7 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/uaccess.h>
#include <linux/device.h>
#include <linux/proc_fs.h>
@@ -135,8 +136,8 @@ static int mv_otg_set_timer(struct mv_otg *mvotg, unsigned int id,
static int mv_otg_reset(struct mv_otg *mvotg)
{
- unsigned int loops;
u32 tmp;
+ int ret;
/* Stop the controller */
tmp = readl(&mvotg->op_regs->usbcmd);
@@ -146,15 +147,12 @@ static int mv_otg_reset(struct mv_otg *mvotg)
/* Reset the controller to get default values */
writel(USBCMD_CTRL_RESET, &mvotg->op_regs->usbcmd);
- loops = 500;
- while (readl(&mvotg->op_regs->usbcmd) & USBCMD_CTRL_RESET) {
- if (loops == 0) {
- dev_err(&mvotg->pdev->dev,
- "Wait for RESET completed TIMEOUT\n");
- return -ETIMEDOUT;
- }
- loops--;
- udelay(20);
+ ret = readl_poll_timeout_atomic(&mvotg->op_regs->usbcmd, tmp,
+ (tmp & USBCMD_CTRL_RESET), 10, 10000);
+ if (ret < 0) {
+ dev_err(&mvotg->pdev->dev,
+ "Wait for RESET completed TIMEOUT\n");
+ return ret;
}
writel(0x0, &mvotg->op_regs->usbintr);
--
1.9.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 36+ messages in thread* [PATCH v3 09/11] usb: phy: phy-mv-usb: convert to readl_poll_timeout_atomic()
@ 2020-08-22 8:05 ` Chunfeng Yun
0 siblings, 0 replies; 36+ messages in thread
From: Chunfeng Yun @ 2020-08-22 8:05 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Felipe Balbi, Sergei Shtylyov, linux-usb, linux-kernel,
Chunfeng Yun, linux-mediatek, Matthias Brugger, Lee Jones,
linux-arm-kernel
Use readl_poll_timeout_atomic() to simplify code
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v3: re-align argument of log suggested by Sergei
v2: udelay 10us instead of 20us according to kerneldoc
---
drivers/usb/phy/phy-mv-usb.c | 18 ++++++++----------
1 file changed, 8 insertions(+), 10 deletions(-)
diff --git a/drivers/usb/phy/phy-mv-usb.c b/drivers/usb/phy/phy-mv-usb.c
index ce767ec..576d925 100644
--- a/drivers/usb/phy/phy-mv-usb.c
+++ b/drivers/usb/phy/phy-mv-usb.c
@@ -8,6 +8,7 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/uaccess.h>
#include <linux/device.h>
#include <linux/proc_fs.h>
@@ -135,8 +136,8 @@ static int mv_otg_set_timer(struct mv_otg *mvotg, unsigned int id,
static int mv_otg_reset(struct mv_otg *mvotg)
{
- unsigned int loops;
u32 tmp;
+ int ret;
/* Stop the controller */
tmp = readl(&mvotg->op_regs->usbcmd);
@@ -146,15 +147,12 @@ static int mv_otg_reset(struct mv_otg *mvotg)
/* Reset the controller to get default values */
writel(USBCMD_CTRL_RESET, &mvotg->op_regs->usbcmd);
- loops = 500;
- while (readl(&mvotg->op_regs->usbcmd) & USBCMD_CTRL_RESET) {
- if (loops == 0) {
- dev_err(&mvotg->pdev->dev,
- "Wait for RESET completed TIMEOUT\n");
- return -ETIMEDOUT;
- }
- loops--;
- udelay(20);
+ ret = readl_poll_timeout_atomic(&mvotg->op_regs->usbcmd, tmp,
+ (tmp & USBCMD_CTRL_RESET), 10, 10000);
+ if (ret < 0) {
+ dev_err(&mvotg->pdev->dev,
+ "Wait for RESET completed TIMEOUT\n");
+ return ret;
}
writel(0x0, &mvotg->op_regs->usbintr);
--
1.9.1
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH v3 10/11] usb: udc: net2280: convert to readl_poll_timeout_atomic()
2020-08-22 8:05 ` Chunfeng Yun
(?)
@ 2020-08-22 8:05 ` Chunfeng Yun
-1 siblings, 0 replies; 36+ messages in thread
From: Chunfeng Yun @ 2020-08-22 8:05 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Felipe Balbi, Matthias Brugger, Chunfeng Yun, linux-usb,
linux-kernel, linux-arm-kernel, linux-mediatek, Lee Jones,
Sergei Shtylyov, Alan Stern
Use readl_poll_timeout_atomic() to simplify code
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
---
v3: no changes
v2: add Acked-by Alan
---
drivers/usb/gadget/udc/net2280.c | 21 ++++++++++-----------
1 file changed, 10 insertions(+), 11 deletions(-)
diff --git a/drivers/usb/gadget/udc/net2280.c b/drivers/usb/gadget/udc/net2280.c
index 7530bd9..f1a21f4 100644
--- a/drivers/usb/gadget/udc/net2280.c
+++ b/drivers/usb/gadget/udc/net2280.c
@@ -52,6 +52,7 @@
#include <linux/usb/gadget.h>
#include <linux/prefetch.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <asm/byteorder.h>
#include <asm/irq.h>
@@ -360,18 +361,16 @@ static inline void enable_pciirqenb(struct net2280_ep *ep)
static int handshake(u32 __iomem *ptr, u32 mask, u32 done, int usec)
{
u32 result;
+ int ret;
- do {
- result = readl(ptr);
- if (result == ~(u32)0) /* "device unplugged" */
- return -ENODEV;
- result &= mask;
- if (result == done)
- return 0;
- udelay(1);
- usec--;
- } while (usec > 0);
- return -ETIMEDOUT;
+ ret = readl_poll_timeout_atomic(ptr, result,
+ ((result & mask) == done ||
+ result == U32_MAX),
+ 1, usec);
+ if (result == U32_MAX) /* device unplugged */
+ return -ENODEV;
+
+ return ret;
}
static const struct usb_ep_ops net2280_ep_ops;
--
1.9.1
^ permalink raw reply related [flat|nested] 36+ messages in thread* [PATCH v3 10/11] usb: udc: net2280: convert to readl_poll_timeout_atomic()
@ 2020-08-22 8:05 ` Chunfeng Yun
0 siblings, 0 replies; 36+ messages in thread
From: Chunfeng Yun @ 2020-08-22 8:05 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Felipe Balbi, Sergei Shtylyov, linux-usb, linux-kernel,
Chunfeng Yun, linux-mediatek, Matthias Brugger, Alan Stern,
Lee Jones, linux-arm-kernel
Use readl_poll_timeout_atomic() to simplify code
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
---
v3: no changes
v2: add Acked-by Alan
---
drivers/usb/gadget/udc/net2280.c | 21 ++++++++++-----------
1 file changed, 10 insertions(+), 11 deletions(-)
diff --git a/drivers/usb/gadget/udc/net2280.c b/drivers/usb/gadget/udc/net2280.c
index 7530bd9..f1a21f4 100644
--- a/drivers/usb/gadget/udc/net2280.c
+++ b/drivers/usb/gadget/udc/net2280.c
@@ -52,6 +52,7 @@
#include <linux/usb/gadget.h>
#include <linux/prefetch.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <asm/byteorder.h>
#include <asm/irq.h>
@@ -360,18 +361,16 @@ static inline void enable_pciirqenb(struct net2280_ep *ep)
static int handshake(u32 __iomem *ptr, u32 mask, u32 done, int usec)
{
u32 result;
+ int ret;
- do {
- result = readl(ptr);
- if (result == ~(u32)0) /* "device unplugged" */
- return -ENODEV;
- result &= mask;
- if (result == done)
- return 0;
- udelay(1);
- usec--;
- } while (usec > 0);
- return -ETIMEDOUT;
+ ret = readl_poll_timeout_atomic(ptr, result,
+ ((result & mask) == done ||
+ result == U32_MAX),
+ 1, usec);
+ if (result == U32_MAX) /* device unplugged */
+ return -ENODEV;
+
+ return ret;
}
static const struct usb_ep_ops net2280_ep_ops;
--
1.9.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 36+ messages in thread* [PATCH v3 10/11] usb: udc: net2280: convert to readl_poll_timeout_atomic()
@ 2020-08-22 8:05 ` Chunfeng Yun
0 siblings, 0 replies; 36+ messages in thread
From: Chunfeng Yun @ 2020-08-22 8:05 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Felipe Balbi, Sergei Shtylyov, linux-usb, linux-kernel,
Chunfeng Yun, linux-mediatek, Matthias Brugger, Alan Stern,
Lee Jones, linux-arm-kernel
Use readl_poll_timeout_atomic() to simplify code
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
---
v3: no changes
v2: add Acked-by Alan
---
drivers/usb/gadget/udc/net2280.c | 21 ++++++++++-----------
1 file changed, 10 insertions(+), 11 deletions(-)
diff --git a/drivers/usb/gadget/udc/net2280.c b/drivers/usb/gadget/udc/net2280.c
index 7530bd9..f1a21f4 100644
--- a/drivers/usb/gadget/udc/net2280.c
+++ b/drivers/usb/gadget/udc/net2280.c
@@ -52,6 +52,7 @@
#include <linux/usb/gadget.h>
#include <linux/prefetch.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <asm/byteorder.h>
#include <asm/irq.h>
@@ -360,18 +361,16 @@ static inline void enable_pciirqenb(struct net2280_ep *ep)
static int handshake(u32 __iomem *ptr, u32 mask, u32 done, int usec)
{
u32 result;
+ int ret;
- do {
- result = readl(ptr);
- if (result == ~(u32)0) /* "device unplugged" */
- return -ENODEV;
- result &= mask;
- if (result == done)
- return 0;
- udelay(1);
- usec--;
- } while (usec > 0);
- return -ETIMEDOUT;
+ ret = readl_poll_timeout_atomic(ptr, result,
+ ((result & mask) == done ||
+ result == U32_MAX),
+ 1, usec);
+ if (result == U32_MAX) /* device unplugged */
+ return -ENODEV;
+
+ return ret;
}
static const struct usb_ep_ops net2280_ep_ops;
--
1.9.1
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH v3 11/11] iopoll: update kerneldoc of read_poll_timeout_atomic()
2020-08-22 8:05 ` Chunfeng Yun
(?)
@ 2020-08-22 8:05 ` Chunfeng Yun
-1 siblings, 0 replies; 36+ messages in thread
From: Chunfeng Yun @ 2020-08-22 8:05 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Felipe Balbi, Matthias Brugger, Chunfeng Yun, linux-usb,
linux-kernel, linux-arm-kernel, linux-mediatek, Lee Jones,
Sergei Shtylyov, Alan Stern
Arguments description of read_poll_timeout_atomic() is out of date,
update it.
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v3: fix typo in commit message suggested by Sergei
v2: new patch, suggested by Alan
---
include/linux/iopoll.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/include/linux/iopoll.h b/include/linux/iopoll.h
index bc89ac6..2c8860e 100644
--- a/include/linux/iopoll.h
+++ b/include/linux/iopoll.h
@@ -60,8 +60,7 @@
/**
* read_poll_timeout_atomic - Periodically poll an address until a condition is
* met or a timeout occurs
- * @op: accessor function (takes @addr as its only argument)
- * @addr: Address to poll
+ * @op: accessor function (takes @args as its arguments)
* @val: Variable to read the value into
* @cond: Break condition (usually involving @val)
* @delay_us: Time to udelay between reads in us (0 tight-loops). Should
@@ -69,6 +68,7 @@
* Documentation/timers/timers-howto.rst).
* @timeout_us: Timeout in us, 0 means never timeout
* @delay_before_read: if it is true, delay @delay_us before read.
+ * @args: arguments for @op poll
*
* Returns 0 on success and -ETIMEDOUT upon a timeout. In either
* case, the last read value at @args is stored in @val.
--
1.9.1
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH v3 11/11] iopoll: update kerneldoc of read_poll_timeout_atomic()
@ 2020-08-22 8:05 ` Chunfeng Yun
0 siblings, 0 replies; 36+ messages in thread
From: Chunfeng Yun @ 2020-08-22 8:05 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Felipe Balbi, Sergei Shtylyov, linux-usb, linux-kernel,
Chunfeng Yun, linux-mediatek, Matthias Brugger, Alan Stern,
Lee Jones, linux-arm-kernel
Arguments description of read_poll_timeout_atomic() is out of date,
update it.
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v3: fix typo in commit message suggested by Sergei
v2: new patch, suggested by Alan
---
include/linux/iopoll.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/include/linux/iopoll.h b/include/linux/iopoll.h
index bc89ac6..2c8860e 100644
--- a/include/linux/iopoll.h
+++ b/include/linux/iopoll.h
@@ -60,8 +60,7 @@
/**
* read_poll_timeout_atomic - Periodically poll an address until a condition is
* met or a timeout occurs
- * @op: accessor function (takes @addr as its only argument)
- * @addr: Address to poll
+ * @op: accessor function (takes @args as its arguments)
* @val: Variable to read the value into
* @cond: Break condition (usually involving @val)
* @delay_us: Time to udelay between reads in us (0 tight-loops). Should
@@ -69,6 +68,7 @@
* Documentation/timers/timers-howto.rst).
* @timeout_us: Timeout in us, 0 means never timeout
* @delay_before_read: if it is true, delay @delay_us before read.
+ * @args: arguments for @op poll
*
* Returns 0 on success and -ETIMEDOUT upon a timeout. In either
* case, the last read value at @args is stored in @val.
--
1.9.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH v3 11/11] iopoll: update kerneldoc of read_poll_timeout_atomic()
@ 2020-08-22 8:05 ` Chunfeng Yun
0 siblings, 0 replies; 36+ messages in thread
From: Chunfeng Yun @ 2020-08-22 8:05 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Felipe Balbi, Sergei Shtylyov, linux-usb, linux-kernel,
Chunfeng Yun, linux-mediatek, Matthias Brugger, Alan Stern,
Lee Jones, linux-arm-kernel
Arguments description of read_poll_timeout_atomic() is out of date,
update it.
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v3: fix typo in commit message suggested by Sergei
v2: new patch, suggested by Alan
---
include/linux/iopoll.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/include/linux/iopoll.h b/include/linux/iopoll.h
index bc89ac6..2c8860e 100644
--- a/include/linux/iopoll.h
+++ b/include/linux/iopoll.h
@@ -60,8 +60,7 @@
/**
* read_poll_timeout_atomic - Periodically poll an address until a condition is
* met or a timeout occurs
- * @op: accessor function (takes @addr as its only argument)
- * @addr: Address to poll
+ * @op: accessor function (takes @args as its arguments)
* @val: Variable to read the value into
* @cond: Break condition (usually involving @val)
* @delay_us: Time to udelay between reads in us (0 tight-loops). Should
@@ -69,6 +68,7 @@
* Documentation/timers/timers-howto.rst).
* @timeout_us: Timeout in us, 0 means never timeout
* @delay_before_read: if it is true, delay @delay_us before read.
+ * @args: arguments for @op poll
*
* Returns 0 on success and -ETIMEDOUT upon a timeout. In either
* case, the last read value at @args is stored in @val.
--
1.9.1
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 36+ messages in thread
* Re: [PATCH v3 01/11] usb: early: convert to readl_poll_timeout_atomic()
2020-08-22 8:05 ` Chunfeng Yun
(?)
@ 2020-08-28 7:53 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 36+ messages in thread
From: Greg Kroah-Hartman @ 2020-08-28 7:53 UTC (permalink / raw)
To: Chunfeng Yun
Cc: Felipe Balbi, Matthias Brugger, linux-usb, linux-kernel,
linux-arm-kernel, linux-mediatek, Lee Jones, Sergei Shtylyov,
Lu Baolu, Mathias Nyman
On Sat, Aug 22, 2020 at 04:05:43PM +0800, Chunfeng Yun wrote:
> Use readl_poll_timeout_atomic() to simplify code
>
> Cc: Lu Baolu <baolu.lu@linux.intel.com>
> Cc: Mathias Nyman <mathias.nyman@linux.intel.com>
> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> ---
> v2~v3: no changes
> ---
> drivers/usb/early/xhci-dbc.c | 14 ++++----------
> 1 file changed, 4 insertions(+), 10 deletions(-)
No patches in this series applied to my tree :(
Please rebase and resend them against the usb-next branch of my usb.git
tree on git.kernel.org
thanks,
greg k-h
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH v3 01/11] usb: early: convert to readl_poll_timeout_atomic()
@ 2020-08-28 7:53 ` Greg Kroah-Hartman
0 siblings, 0 replies; 36+ messages in thread
From: Greg Kroah-Hartman @ 2020-08-28 7:53 UTC (permalink / raw)
To: Chunfeng Yun
Cc: Felipe Balbi, Mathias Nyman, Sergei Shtylyov, linux-usb,
linux-kernel, linux-mediatek, Matthias Brugger, Lee Jones,
linux-arm-kernel, Lu Baolu
On Sat, Aug 22, 2020 at 04:05:43PM +0800, Chunfeng Yun wrote:
> Use readl_poll_timeout_atomic() to simplify code
>
> Cc: Lu Baolu <baolu.lu@linux.intel.com>
> Cc: Mathias Nyman <mathias.nyman@linux.intel.com>
> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> ---
> v2~v3: no changes
> ---
> drivers/usb/early/xhci-dbc.c | 14 ++++----------
> 1 file changed, 4 insertions(+), 10 deletions(-)
No patches in this series applied to my tree :(
Please rebase and resend them against the usb-next branch of my usb.git
tree on git.kernel.org
thanks,
greg k-h
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH v3 01/11] usb: early: convert to readl_poll_timeout_atomic()
@ 2020-08-28 7:53 ` Greg Kroah-Hartman
0 siblings, 0 replies; 36+ messages in thread
From: Greg Kroah-Hartman @ 2020-08-28 7:53 UTC (permalink / raw)
To: Chunfeng Yun
Cc: Felipe Balbi, Mathias Nyman, Sergei Shtylyov, linux-usb,
linux-kernel, linux-mediatek, Matthias Brugger, Lee Jones,
linux-arm-kernel, Lu Baolu
On Sat, Aug 22, 2020 at 04:05:43PM +0800, Chunfeng Yun wrote:
> Use readl_poll_timeout_atomic() to simplify code
>
> Cc: Lu Baolu <baolu.lu@linux.intel.com>
> Cc: Mathias Nyman <mathias.nyman@linux.intel.com>
> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> ---
> v2~v3: no changes
> ---
> drivers/usb/early/xhci-dbc.c | 14 ++++----------
> 1 file changed, 4 insertions(+), 10 deletions(-)
No patches in this series applied to my tree :(
Please rebase and resend them against the usb-next branch of my usb.git
tree on git.kernel.org
thanks,
greg k-h
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 36+ messages in thread