* [PATCH] thermal: amlogic: Add hwmon support
@ 2020-11-15 19:06 ` Martin Blumenstingl
0 siblings, 0 replies; 7+ messages in thread
From: Martin Blumenstingl @ 2020-11-15 19:06 UTC (permalink / raw)
To: glaroque, linux-pm, linux-amlogic
Cc: rui.zhang, daniel.lezcano, amitk, linux-kernel, Martin Blumenstingl
Many monitoring tools read the CPU temperature using the hwmon
interface. Expose the thermal sensors on Amlogic boards as hwmon
devices.
Without this lm_sensors' "sensors" tool does not find any temperature
sensors. Now it prints:
cpu_thermal-virtual-0
Adapter: Virtual device
temp1: +44.7 C (crit = +110.0 C)
ddr_thermal-virtual-0
Adapter: Virtual device
temp1: +45.9 C (crit = +110.0 C)
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
drivers/thermal/amlogic_thermal.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/thermal/amlogic_thermal.c b/drivers/thermal/amlogic_thermal.c
index ccb1fe18e993..dffe3ba8c7c4 100644
--- a/drivers/thermal/amlogic_thermal.c
+++ b/drivers/thermal/amlogic_thermal.c
@@ -29,6 +29,7 @@
#include <linux/thermal.h>
#include "thermal_core.h"
+#include "thermal_hwmon.h"
#define TSENSOR_CFG_REG1 0x4
#define TSENSOR_CFG_REG1_RSET_VBG BIT(12)
@@ -287,6 +288,9 @@ static int amlogic_thermal_probe(struct platform_device *pdev)
return ret;
}
+ if (devm_thermal_add_hwmon_sysfs(pdata->tzd))
+ dev_warn(&pdev->dev, "Failed to add hwmon sysfs attributes\n");
+
ret = amlogic_thermal_initialize(pdata);
if (ret)
return ret;
--
2.29.2
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH] thermal: amlogic: Add hwmon support
@ 2020-11-15 19:06 ` Martin Blumenstingl
0 siblings, 0 replies; 7+ messages in thread
From: Martin Blumenstingl @ 2020-11-15 19:06 UTC (permalink / raw)
To: glaroque, linux-pm, linux-amlogic
Cc: amitk, Martin Blumenstingl, rui.zhang, daniel.lezcano, linux-kernel
Many monitoring tools read the CPU temperature using the hwmon
interface. Expose the thermal sensors on Amlogic boards as hwmon
devices.
Without this lm_sensors' "sensors" tool does not find any temperature
sensors. Now it prints:
cpu_thermal-virtual-0
Adapter: Virtual device
temp1: +44.7 C (crit = +110.0 C)
ddr_thermal-virtual-0
Adapter: Virtual device
temp1: +45.9 C (crit = +110.0 C)
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
drivers/thermal/amlogic_thermal.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/thermal/amlogic_thermal.c b/drivers/thermal/amlogic_thermal.c
index ccb1fe18e993..dffe3ba8c7c4 100644
--- a/drivers/thermal/amlogic_thermal.c
+++ b/drivers/thermal/amlogic_thermal.c
@@ -29,6 +29,7 @@
#include <linux/thermal.h>
#include "thermal_core.h"
+#include "thermal_hwmon.h"
#define TSENSOR_CFG_REG1 0x4
#define TSENSOR_CFG_REG1_RSET_VBG BIT(12)
@@ -287,6 +288,9 @@ static int amlogic_thermal_probe(struct platform_device *pdev)
return ret;
}
+ if (devm_thermal_add_hwmon_sysfs(pdata->tzd))
+ dev_warn(&pdev->dev, "Failed to add hwmon sysfs attributes\n");
+
ret = amlogic_thermal_initialize(pdata);
if (ret)
return ret;
--
2.29.2
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH] thermal: amlogic: Add hwmon support
2020-11-15 19:06 ` Martin Blumenstingl
@ 2020-11-16 8:35 ` Neil Armstrong
-1 siblings, 0 replies; 7+ messages in thread
From: Neil Armstrong @ 2020-11-16 8:35 UTC (permalink / raw)
To: Martin Blumenstingl, glaroque, linux-pm, linux-amlogic
Cc: amitk, rui.zhang, daniel.lezcano, linux-kernel
On 15/11/2020 20:06, Martin Blumenstingl wrote:
> Many monitoring tools read the CPU temperature using the hwmon
> interface. Expose the thermal sensors on Amlogic boards as hwmon
> devices.
>
> Without this lm_sensors' "sensors" tool does not find any temperature
> sensors. Now it prints:
> cpu_thermal-virtual-0
> Adapter: Virtual device
> temp1: +44.7 C (crit = +110.0 C)
>
> ddr_thermal-virtual-0
> Adapter: Virtual device
> temp1: +45.9 C (crit = +110.0 C)
>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
> drivers/thermal/amlogic_thermal.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/thermal/amlogic_thermal.c b/drivers/thermal/amlogic_thermal.c
> index ccb1fe18e993..dffe3ba8c7c4 100644
> --- a/drivers/thermal/amlogic_thermal.c
> +++ b/drivers/thermal/amlogic_thermal.c
> @@ -29,6 +29,7 @@
> #include <linux/thermal.h>
>
> #include "thermal_core.h"
> +#include "thermal_hwmon.h"
>
> #define TSENSOR_CFG_REG1 0x4
> #define TSENSOR_CFG_REG1_RSET_VBG BIT(12)
> @@ -287,6 +288,9 @@ static int amlogic_thermal_probe(struct platform_device *pdev)
> return ret;
> }l
>
> + if (devm_thermal_add_hwmon_sysfs(pdata->tzd))
> + dev_warn(&pdev->dev, "Failed to add hwmon sysfs attributes\n");
> +
> ret = amlogic_thermal_initialize(pdata);
> if (ret)
> return ret;
>
Thanks !!
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] thermal: amlogic: Add hwmon support
@ 2020-11-16 8:35 ` Neil Armstrong
0 siblings, 0 replies; 7+ messages in thread
From: Neil Armstrong @ 2020-11-16 8:35 UTC (permalink / raw)
To: Martin Blumenstingl, glaroque, linux-pm, linux-amlogic
Cc: rui.zhang, amitk, daniel.lezcano, linux-kernel
On 15/11/2020 20:06, Martin Blumenstingl wrote:
> Many monitoring tools read the CPU temperature using the hwmon
> interface. Expose the thermal sensors on Amlogic boards as hwmon
> devices.
>
> Without this lm_sensors' "sensors" tool does not find any temperature
> sensors. Now it prints:
> cpu_thermal-virtual-0
> Adapter: Virtual device
> temp1: +44.7 C (crit = +110.0 C)
>
> ddr_thermal-virtual-0
> Adapter: Virtual device
> temp1: +45.9 C (crit = +110.0 C)
>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
> drivers/thermal/amlogic_thermal.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/thermal/amlogic_thermal.c b/drivers/thermal/amlogic_thermal.c
> index ccb1fe18e993..dffe3ba8c7c4 100644
> --- a/drivers/thermal/amlogic_thermal.c
> +++ b/drivers/thermal/amlogic_thermal.c
> @@ -29,6 +29,7 @@
> #include <linux/thermal.h>
>
> #include "thermal_core.h"
> +#include "thermal_hwmon.h"
>
> #define TSENSOR_CFG_REG1 0x4
> #define TSENSOR_CFG_REG1_RSET_VBG BIT(12)
> @@ -287,6 +288,9 @@ static int amlogic_thermal_probe(struct platform_device *pdev)
> return ret;
> }l
>
> + if (devm_thermal_add_hwmon_sysfs(pdata->tzd))
> + dev_warn(&pdev->dev, "Failed to add hwmon sysfs attributes\n");
> +
> ret = amlogic_thermal_initialize(pdata);
> if (ret)
> return ret;
>
Thanks !!
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] thermal: amlogic: Add hwmon support
2020-11-15 19:06 ` Martin Blumenstingl
@ 2020-11-16 9:31 ` Daniel Lezcano
-1 siblings, 0 replies; 7+ messages in thread
From: Daniel Lezcano @ 2020-11-16 9:31 UTC (permalink / raw)
To: Martin Blumenstingl, glaroque, linux-pm, linux-amlogic
Cc: rui.zhang, amitk, linux-kernel
On 15/11/2020 20:06, Martin Blumenstingl wrote:
> Many monitoring tools read the CPU temperature using the hwmon
> interface. Expose the thermal sensors on Amlogic boards as hwmon
> devices.
>
> Without this lm_sensors' "sensors" tool does not find any temperature
> sensors. Now it prints:
> cpu_thermal-virtual-0
> Adapter: Virtual device
> temp1: +44.7 C (crit = +110.0 C)
>
> ddr_thermal-virtual-0
> Adapter: Virtual device
> temp1: +45.9 C (crit = +110.0 C)
>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
Applied, thanks
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] thermal: amlogic: Add hwmon support
@ 2020-11-16 9:31 ` Daniel Lezcano
0 siblings, 0 replies; 7+ messages in thread
From: Daniel Lezcano @ 2020-11-16 9:31 UTC (permalink / raw)
To: Martin Blumenstingl, glaroque, linux-pm, linux-amlogic
Cc: rui.zhang, amitk, linux-kernel
On 15/11/2020 20:06, Martin Blumenstingl wrote:
> Many monitoring tools read the CPU temperature using the hwmon
> interface. Expose the thermal sensors on Amlogic boards as hwmon
> devices.
>
> Without this lm_sensors' "sensors" tool does not find any temperature
> sensors. Now it prints:
> cpu_thermal-virtual-0
> Adapter: Virtual device
> temp1: +44.7 C (crit = +110.0 C)
>
> ddr_thermal-virtual-0
> Adapter: Virtual device
> temp1: +45.9 C (crit = +110.0 C)
>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
Applied, thanks
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 7+ messages in thread
* [thermal: thermal/next] thermal: amlogic: Add hwmon support
2020-11-15 19:06 ` Martin Blumenstingl
` (2 preceding siblings ...)
(?)
@ 2020-11-24 9:36 ` thermal-bot for Martin Blumenstingl
-1 siblings, 0 replies; 7+ messages in thread
From: thermal-bot for Martin Blumenstingl @ 2020-11-24 9:36 UTC (permalink / raw)
To: linux-pm
Cc: Martin Blumenstingl, Neil Armstrong, Daniel Lezcano, rui.zhang, amitk
The following commit has been merged into the thermal/next branch of thermal:
Commit-ID: cb68a8580e2086fad38597af4c60d39de8df0cde
Gitweb: https://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git//cb68a8580e2086fad38597af4c60d39de8df0cde
Author: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
AuthorDate: Sun, 15 Nov 2020 20:06:58 +01:00
Committer: Daniel Lezcano <daniel.lezcano@linaro.org>
CommitterDate: Mon, 16 Nov 2020 10:30:53 +01:00
thermal: amlogic: Add hwmon support
Many monitoring tools read the CPU temperature using the hwmon
interface. Expose the thermal sensors on Amlogic boards as hwmon
devices.
Without this lm_sensors' "sensors" tool does not find any temperature
sensors. Now it prints:
cpu_thermal-virtual-0
Adapter: Virtual device
temp1: +44.7 C (crit = +110.0 C)
ddr_thermal-virtual-0
Adapter: Virtual device
temp1: +45.9 C (crit = +110.0 C)
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20201115190658.631578-1-martin.blumenstingl@googlemail.com
---
drivers/thermal/amlogic_thermal.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/thermal/amlogic_thermal.c b/drivers/thermal/amlogic_thermal.c
index ccb1fe1..dffe3ba 100644
--- a/drivers/thermal/amlogic_thermal.c
+++ b/drivers/thermal/amlogic_thermal.c
@@ -29,6 +29,7 @@
#include <linux/thermal.h>
#include "thermal_core.h"
+#include "thermal_hwmon.h"
#define TSENSOR_CFG_REG1 0x4
#define TSENSOR_CFG_REG1_RSET_VBG BIT(12)
@@ -287,6 +288,9 @@ static int amlogic_thermal_probe(struct platform_device *pdev)
return ret;
}
+ if (devm_thermal_add_hwmon_sysfs(pdata->tzd))
+ dev_warn(&pdev->dev, "Failed to add hwmon sysfs attributes\n");
+
ret = amlogic_thermal_initialize(pdata);
if (ret)
return ret;
^ permalink raw reply related [flat|nested] 7+ messages in thread
end of thread, other threads:[~2020-11-24 9:36 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-11-15 19:06 [PATCH] thermal: amlogic: Add hwmon support Martin Blumenstingl
2020-11-15 19:06 ` Martin Blumenstingl
2020-11-16 8:35 ` Neil Armstrong
2020-11-16 8:35 ` Neil Armstrong
2020-11-16 9:31 ` Daniel Lezcano
2020-11-16 9:31 ` Daniel Lezcano
2020-11-24 9:36 ` [thermal: thermal/next] " thermal-bot for Martin Blumenstingl
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.