From: Yash Shah <yash.shah@sifive.com> To: linux-spi@vger.kernel.org, linux-serial@vger.kernel.org, linux-pwm@vger.kernel.org, linux-i2c@vger.kernel.org, linux-kernel@vger.kernel.org, linux-riscv@lists.infradead.org, devicetree@vger.kernel.org, linux-gpio@vger.kernel.org Cc: broonie@kernel.org, gregkh@linuxfoundation.org, aou@eecs.berkeley.edu, lee.jones@linaro.org, u.kleine-koenig@pengutronix.de, thierry.reding@gmail.com, andrew@lunn.ch, peter@korsgaard.com, paul.walmsley@sifive.com, palmer@dabbelt.com, robh+dt@kernel.org, bgolaszewski@baylibre.com, linus.walleij@linaro.org, sachin.ghadi@sifive.com, Yash Shah <yash.shah@sifive.com> Subject: [PATCH 4/4] riscv: dts: add initial board data for the SiFive HiFive Unmatched Date: Wed, 2 Dec 2020 13:33:56 +0530 [thread overview] Message-ID: <1606896236-62780-5-git-send-email-yash.shah@sifive.com> (raw) In-Reply-To: <1606896236-62780-1-git-send-email-yash.shah@sifive.com> Add initial board data for the SiFive HiFive Unmatched A00 Signed-off-by: Yash Shah <yash.shah@sifive.com> --- arch/riscv/boot/dts/sifive/Makefile | 3 +- .../riscv/boot/dts/sifive/hifive-unmatched-a00.dts | 253 +++++++++++++++++++++ 2 files changed, 255 insertions(+), 1 deletion(-) create mode 100644 arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts diff --git a/arch/riscv/boot/dts/sifive/Makefile b/arch/riscv/boot/dts/sifive/Makefile index 6d6189e..74c47fe 100644 --- a/arch/riscv/boot/dts/sifive/Makefile +++ b/arch/riscv/boot/dts/sifive/Makefile @@ -1,2 +1,3 @@ # SPDX-License-Identifier: GPL-2.0 -dtb-$(CONFIG_SOC_SIFIVE) += hifive-unleashed-a00.dtb +dtb-$(CONFIG_SOC_SIFIVE) += hifive-unleashed-a00.dtb \ + hifive-unmatched-a00.dtb diff --git a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts new file mode 100644 index 0000000..b1c3c59 --- /dev/null +++ b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts @@ -0,0 +1,253 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* Copyright (c) 2020 SiFive, Inc */ + +#include "fu740-c000.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> + +/* Clock frequency (in Hz) of the PCB crystal for rtcclk */ +#define RTCCLK_FREQ 1000000 + +/ { + #address-cells = <2>; + #size-cells = <2>; + model = "SiFive HiFive Unmatched A00"; + compatible = "sifive,hifive-unmatched-a00", "sifive,fu740-c000", + "sifive,fu740"; + + chosen { + stdout-path = "serial0"; + }; + + cpus { + timebase-frequency = <RTCCLK_FREQ>; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x2 0x00000000>; + }; + + soc { + }; + + hfclk: hfclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <26000000>; + clock-output-names = "hfclk"; + }; + + rtcclk: rtcclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <RTCCLK_FREQ>; + clock-output-names = "rtcclk"; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + temperature-sensor@4c { + compatible = "ti,tmp451"; + reg = <0x4c>; + interrupt-parent = <&gpio>; + interrupts = <6 IRQ_TYPE_LEVEL_LOW>; + }; + + pmic@58 { + compatible = "dlg,da9063"; + reg = <0x58>; + interrupt-parent = <&gpio>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + + regulators { + vdd_bcore1: bcore1 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-min-microamp = <5000000>; + regulator-max-microamp = <5000000>; + regulator-always-on; + }; + + vdd_bcore2: bcore2 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-min-microamp = <5000000>; + regulator-max-microamp = <5000000>; + regulator-always-on; + }; + + vdd_bpro: bpro { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-min-microamp = <2500000>; + regulator-max-microamp = <2500000>; + regulator-always-on; + }; + + vdd_bperi: bperi { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-min-microamp = <1500000>; + regulator-max-microamp = <1500000>; + regulator-always-on; + }; + + vdd_bmem: bmem { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-min-microamp = <3000000>; + regulator-max-microamp = <3000000>; + regulator-always-on; + }; + + vdd_bio: bio { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-min-microamp = <3000000>; + regulator-max-microamp = <3000000>; + regulator-always-on; + }; + + vdd_ldo1: ldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-min-microamp = <100000>; + regulator-max-microamp = <100000>; + regulator-always-on; + }; + + vdd_ldo2: ldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-min-microamp = <200000>; + regulator-max-microamp = <200000>; + regulator-always-on; + }; + + vdd_ldo3: ldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-min-microamp = <200000>; + regulator-max-microamp = <200000>; + regulator-always-on; + }; + + vdd_ldo4: ldo4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-min-microamp = <200000>; + regulator-max-microamp = <200000>; + regulator-always-on; + }; + + vdd_ldo5: ldo5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-min-microamp = <100000>; + regulator-max-microamp = <100000>; + regulator-always-on; + }; + + vdd_ldo6: ldo6 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-min-microamp = <200000>; + regulator-max-microamp = <200000>; + regulator-always-on; + }; + + vdd_ldo7: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-min-microamp = <200000>; + regulator-max-microamp = <200000>; + regulator-always-on; + }; + + vdd_ldo8: ldo8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-min-microamp = <200000>; + regulator-max-microamp = <200000>; + regulator-always-on; + }; + + vdd_ld09: ldo9 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-min-microamp = <200000>; + regulator-max-microamp = <200000>; + }; + + vdd_ldo10: ldo10 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-min-microamp = <300000>; + regulator-max-microamp = <300000>; + }; + + vdd_ldo11: ldo11 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-min-microamp = <300000>; + regulator-max-microamp = <300000>; + regulator-always-on; + }; + }; + }; +}; + +&qspi0 { + status = "okay"; + flash@0 { + compatible = "issi,is25wp256", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + m25p,fast-read; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + }; +}; + +&spi0 { + status = "okay"; + mmc@0 { + compatible = "mmc-spi-slot"; + reg = <0>; + spi-max-frequency = <20000000>; + voltage-ranges = <3300 3300>; + disable-wp; + }; +}; + +ð0 { + status = "okay"; + phy-mode = "gmii"; + phy-handle = <&phy0>; + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +&gpio { + status = "okay"; +}; -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Yash Shah <yash.shah@sifive.com> To: linux-spi@vger.kernel.org, linux-serial@vger.kernel.org, linux-pwm@vger.kernel.org, linux-i2c@vger.kernel.org, linux-kernel@vger.kernel.org, linux-riscv@lists.infradead.org, devicetree@vger.kernel.org, linux-gpio@vger.kernel.org Cc: andrew@lunn.ch, peter@korsgaard.com, aou@eecs.berkeley.edu, sachin.ghadi@sifive.com, gregkh@linuxfoundation.org, broonie@kernel.org, paul.walmsley@sifive.com, robh+dt@kernel.org, bgolaszewski@baylibre.com, Yash Shah <yash.shah@sifive.com>, thierry.reding@gmail.com, palmer@dabbelt.com, u.kleine-koenig@pengutronix.de, lee.jones@linaro.org, linus.walleij@linaro.org Subject: [PATCH 4/4] riscv: dts: add initial board data for the SiFive HiFive Unmatched Date: Wed, 2 Dec 2020 13:33:56 +0530 [thread overview] Message-ID: <1606896236-62780-5-git-send-email-yash.shah@sifive.com> (raw) In-Reply-To: <1606896236-62780-1-git-send-email-yash.shah@sifive.com> Add initial board data for the SiFive HiFive Unmatched A00 Signed-off-by: Yash Shah <yash.shah@sifive.com> --- arch/riscv/boot/dts/sifive/Makefile | 3 +- .../riscv/boot/dts/sifive/hifive-unmatched-a00.dts | 253 +++++++++++++++++++++ 2 files changed, 255 insertions(+), 1 deletion(-) create mode 100644 arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts diff --git a/arch/riscv/boot/dts/sifive/Makefile b/arch/riscv/boot/dts/sifive/Makefile index 6d6189e..74c47fe 100644 --- a/arch/riscv/boot/dts/sifive/Makefile +++ b/arch/riscv/boot/dts/sifive/Makefile @@ -1,2 +1,3 @@ # SPDX-License-Identifier: GPL-2.0 -dtb-$(CONFIG_SOC_SIFIVE) += hifive-unleashed-a00.dtb +dtb-$(CONFIG_SOC_SIFIVE) += hifive-unleashed-a00.dtb \ + hifive-unmatched-a00.dtb diff --git a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts new file mode 100644 index 0000000..b1c3c59 --- /dev/null +++ b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts @@ -0,0 +1,253 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* Copyright (c) 2020 SiFive, Inc */ + +#include "fu740-c000.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> + +/* Clock frequency (in Hz) of the PCB crystal for rtcclk */ +#define RTCCLK_FREQ 1000000 + +/ { + #address-cells = <2>; + #size-cells = <2>; + model = "SiFive HiFive Unmatched A00"; + compatible = "sifive,hifive-unmatched-a00", "sifive,fu740-c000", + "sifive,fu740"; + + chosen { + stdout-path = "serial0"; + }; + + cpus { + timebase-frequency = <RTCCLK_FREQ>; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x2 0x00000000>; + }; + + soc { + }; + + hfclk: hfclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <26000000>; + clock-output-names = "hfclk"; + }; + + rtcclk: rtcclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <RTCCLK_FREQ>; + clock-output-names = "rtcclk"; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + temperature-sensor@4c { + compatible = "ti,tmp451"; + reg = <0x4c>; + interrupt-parent = <&gpio>; + interrupts = <6 IRQ_TYPE_LEVEL_LOW>; + }; + + pmic@58 { + compatible = "dlg,da9063"; + reg = <0x58>; + interrupt-parent = <&gpio>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + + regulators { + vdd_bcore1: bcore1 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-min-microamp = <5000000>; + regulator-max-microamp = <5000000>; + regulator-always-on; + }; + + vdd_bcore2: bcore2 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-min-microamp = <5000000>; + regulator-max-microamp = <5000000>; + regulator-always-on; + }; + + vdd_bpro: bpro { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-min-microamp = <2500000>; + regulator-max-microamp = <2500000>; + regulator-always-on; + }; + + vdd_bperi: bperi { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-min-microamp = <1500000>; + regulator-max-microamp = <1500000>; + regulator-always-on; + }; + + vdd_bmem: bmem { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-min-microamp = <3000000>; + regulator-max-microamp = <3000000>; + regulator-always-on; + }; + + vdd_bio: bio { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-min-microamp = <3000000>; + regulator-max-microamp = <3000000>; + regulator-always-on; + }; + + vdd_ldo1: ldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-min-microamp = <100000>; + regulator-max-microamp = <100000>; + regulator-always-on; + }; + + vdd_ldo2: ldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-min-microamp = <200000>; + regulator-max-microamp = <200000>; + regulator-always-on; + }; + + vdd_ldo3: ldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-min-microamp = <200000>; + regulator-max-microamp = <200000>; + regulator-always-on; + }; + + vdd_ldo4: ldo4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-min-microamp = <200000>; + regulator-max-microamp = <200000>; + regulator-always-on; + }; + + vdd_ldo5: ldo5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-min-microamp = <100000>; + regulator-max-microamp = <100000>; + regulator-always-on; + }; + + vdd_ldo6: ldo6 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-min-microamp = <200000>; + regulator-max-microamp = <200000>; + regulator-always-on; + }; + + vdd_ldo7: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-min-microamp = <200000>; + regulator-max-microamp = <200000>; + regulator-always-on; + }; + + vdd_ldo8: ldo8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-min-microamp = <200000>; + regulator-max-microamp = <200000>; + regulator-always-on; + }; + + vdd_ld09: ldo9 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-min-microamp = <200000>; + regulator-max-microamp = <200000>; + }; + + vdd_ldo10: ldo10 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-min-microamp = <300000>; + regulator-max-microamp = <300000>; + }; + + vdd_ldo11: ldo11 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-min-microamp = <300000>; + regulator-max-microamp = <300000>; + regulator-always-on; + }; + }; + }; +}; + +&qspi0 { + status = "okay"; + flash@0 { + compatible = "issi,is25wp256", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + m25p,fast-read; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + }; +}; + +&spi0 { + status = "okay"; + mmc@0 { + compatible = "mmc-spi-slot"; + reg = <0>; + spi-max-frequency = <20000000>; + voltage-ranges = <3300 3300>; + disable-wp; + }; +}; + +ð0 { + status = "okay"; + phy-mode = "gmii"; + phy-handle = <&phy0>; + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +&gpio { + status = "okay"; +}; -- 2.7.4 _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2020-12-02 8:06 UTC|newest] Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-12-02 8:03 [PATCH 0/4] arch: riscv: add board and SoC DT file support Yash Shah 2020-12-02 8:03 ` Yash Shah 2020-12-02 8:03 ` [PATCH 1/4] dt-bindings: riscv: Update DT binding docs to support SiFive FU740 SoC Yash Shah 2020-12-02 8:03 ` Yash Shah 2020-12-02 13:04 ` Mark Brown 2020-12-02 13:04 ` Mark Brown 2020-12-02 14:58 ` Andrew Lunn 2020-12-02 14:58 ` Andrew Lunn 2020-12-03 6:36 ` Yash Shah 2020-12-03 6:36 ` Yash Shah 2020-12-02 8:03 ` [PATCH 2/4] riscv: dts: add initial support for the SiFive FU740-C000 SoC Yash Shah 2020-12-02 8:03 ` Yash Shah 2020-12-02 8:03 ` [PATCH 3/4] dt-bindings: riscv: Update YAML doc to support SiFive HiFive Unmatched board Yash Shah 2020-12-02 8:03 ` Yash Shah 2020-12-02 8:03 ` Yash Shah [this message] 2020-12-02 8:03 ` [PATCH 4/4] riscv: dts: add initial board data for the SiFive HiFive Unmatched Yash Shah 2020-12-03 0:43 ` kernel test robot 2020-12-03 0:43 ` kernel test robot 2020-12-03 0:43 ` kernel test robot
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1606896236-62780-5-git-send-email-yash.shah@sifive.com \ --to=yash.shah@sifive.com \ --cc=andrew@lunn.ch \ --cc=aou@eecs.berkeley.edu \ --cc=bgolaszewski@baylibre.com \ --cc=broonie@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=gregkh@linuxfoundation.org \ --cc=lee.jones@linaro.org \ --cc=linus.walleij@linaro.org \ --cc=linux-gpio@vger.kernel.org \ --cc=linux-i2c@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pwm@vger.kernel.org \ --cc=linux-riscv@lists.infradead.org \ --cc=linux-serial@vger.kernel.org \ --cc=linux-spi@vger.kernel.org \ --cc=palmer@dabbelt.com \ --cc=paul.walmsley@sifive.com \ --cc=peter@korsgaard.com \ --cc=robh+dt@kernel.org \ --cc=sachin.ghadi@sifive.com \ --cc=thierry.reding@gmail.com \ --cc=u.kleine-koenig@pengutronix.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.