* [PATCH v2 1/2] powerpc/44x: Don't support 440 when CONFIG_PPC_47x is set
@ 2020-10-18 17:25 ` Christophe Leroy
0 siblings, 0 replies; 6+ messages in thread
From: Christophe Leroy @ 2020-10-18 17:25 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
Cc: linux-kernel, linuxppc-dev
As stated in platform/44x/Kconfig, CONFIG_PPC_47x is not
compatible with 440 and 460 variants.
This is confirmed in asm/cache.h as L1_CACHE_SHIFT is different
for 47x, meaning a kernel built for 47x will not run correctly
on a 440.
In cputable, opt out all 440 and 460 variants when CONFIG_PPC_47x
is set. Also add a default match dedicated to 470.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
arch/powerpc/include/asm/cputable.h | 9 +++++----
arch/powerpc/include/asm/mmu.h | 7 +++----
arch/powerpc/kernel/cputable.c | 29 +++++++++++++++++++++--------
3 files changed, 29 insertions(+), 16 deletions(-)
diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index d88bcb79f16d..4a0ddf66bd4a 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -523,11 +523,10 @@ enum {
#ifdef CONFIG_40x
CPU_FTRS_40X |
#endif
-#ifdef CONFIG_44x
- CPU_FTRS_44X | CPU_FTRS_440x6 |
-#endif
#ifdef CONFIG_PPC_47x
CPU_FTRS_47X | CPU_FTR_476_DD2 |
+#elif defined(CONFIG_44x)
+ CPU_FTRS_44X | CPU_FTRS_440x6 |
#endif
#ifdef CONFIG_E200
CPU_FTRS_E200 |
@@ -596,7 +595,9 @@ enum {
#ifdef CONFIG_40x
CPU_FTRS_40X &
#endif
-#ifdef CONFIG_44x
+#ifdef CONFIG_PPC_47x
+ CPU_FTRS_47X &
+#elif defined(CONFIG_44x)
CPU_FTRS_44X & CPU_FTRS_440x6 &
#endif
#ifdef CONFIG_E200
diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h
index a1769c0426f2..bf5d3b5291f1 100644
--- a/arch/powerpc/include/asm/mmu.h
+++ b/arch/powerpc/include/asm/mmu.h
@@ -162,15 +162,14 @@ enum {
#ifdef CONFIG_40x
MMU_FTR_TYPE_40x |
#endif
-#ifdef CONFIG_44x
+#ifdef CONFIG_PPC_47x
+ MMU_FTR_TYPE_47x | MMU_FTR_USE_TLBIVAX_BCAST | MMU_FTR_LOCK_BCAST_INVAL |
+#elif defined(CONFIG_44x)
MMU_FTR_TYPE_44x |
#endif
#if defined(CONFIG_E200) || defined(CONFIG_E500)
MMU_FTR_TYPE_FSL_E | MMU_FTR_BIG_PHYS | MMU_FTR_USE_TLBILX |
#endif
-#ifdef CONFIG_PPC_47x
- MMU_FTR_TYPE_47x | MMU_FTR_USE_TLBIVAX_BCAST | MMU_FTR_LOCK_BCAST_INVAL |
-#endif
#ifdef CONFIG_PPC_BOOK3S_32
MMU_FTR_USE_HIGH_BATS |
#endif
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 492c0b36aff6..cf80e6c8ed5e 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -1533,6 +1533,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
#endif /* CONFIG_40x */
#ifdef CONFIG_44x
+#ifndef CONFIG_PPC_47x
{
.pvr_mask = 0xf0000fff,
.pvr_value = 0x40000850,
@@ -1815,7 +1816,19 @@ static struct cpu_spec __initdata cpu_specs[] = {
.machine_check = machine_check_440A,
.platform = "ppc440",
},
-#ifdef CONFIG_PPC_47x
+ { /* default match */
+ .pvr_mask = 0x00000000,
+ .pvr_value = 0x00000000,
+ .cpu_name = "(generic 44x PPC)",
+ .cpu_features = CPU_FTRS_44X,
+ .cpu_user_features = COMMON_USER_BOOKE,
+ .mmu_features = MMU_FTR_TYPE_44x,
+ .icache_bsize = 32,
+ .dcache_bsize = 32,
+ .machine_check = machine_check_4xx,
+ .platform = "ppc440",
+ }
+#else /* CONFIG_PPC_47x */
{ /* 476 DD2 core */
.pvr_mask = 0xffffffff,
.pvr_value = 0x11a52080,
@@ -1872,19 +1885,19 @@ static struct cpu_spec __initdata cpu_specs[] = {
.machine_check = machine_check_47x,
.platform = "ppc470",
},
-#endif /* CONFIG_PPC_47x */
{ /* default match */
.pvr_mask = 0x00000000,
.pvr_value = 0x00000000,
- .cpu_name = "(generic 44x PPC)",
- .cpu_features = CPU_FTRS_44X,
+ .cpu_name = "(generic 47x PPC)",
+ .cpu_features = CPU_FTRS_47X,
.cpu_user_features = COMMON_USER_BOOKE,
- .mmu_features = MMU_FTR_TYPE_44x,
+ .mmu_features = MMU_FTR_TYPE_47x,
.icache_bsize = 32,
- .dcache_bsize = 32,
- .machine_check = machine_check_4xx,
- .platform = "ppc440",
+ .dcache_bsize = 128,
+ .machine_check = machine_check_47x,
+ .platform = "ppc470",
}
+#endif /* CONFIG_PPC_47x */
#endif /* CONFIG_44x */
#ifdef CONFIG_E200
{ /* e200z5 */
--
2.25.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v2 1/2] powerpc/44x: Don't support 440 when CONFIG_PPC_47x is set
@ 2020-10-18 17:25 ` Christophe Leroy
0 siblings, 0 replies; 6+ messages in thread
From: Christophe Leroy @ 2020-10-18 17:25 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
Cc: linuxppc-dev, linux-kernel
As stated in platform/44x/Kconfig, CONFIG_PPC_47x is not
compatible with 440 and 460 variants.
This is confirmed in asm/cache.h as L1_CACHE_SHIFT is different
for 47x, meaning a kernel built for 47x will not run correctly
on a 440.
In cputable, opt out all 440 and 460 variants when CONFIG_PPC_47x
is set. Also add a default match dedicated to 470.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
arch/powerpc/include/asm/cputable.h | 9 +++++----
arch/powerpc/include/asm/mmu.h | 7 +++----
arch/powerpc/kernel/cputable.c | 29 +++++++++++++++++++++--------
3 files changed, 29 insertions(+), 16 deletions(-)
diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index d88bcb79f16d..4a0ddf66bd4a 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -523,11 +523,10 @@ enum {
#ifdef CONFIG_40x
CPU_FTRS_40X |
#endif
-#ifdef CONFIG_44x
- CPU_FTRS_44X | CPU_FTRS_440x6 |
-#endif
#ifdef CONFIG_PPC_47x
CPU_FTRS_47X | CPU_FTR_476_DD2 |
+#elif defined(CONFIG_44x)
+ CPU_FTRS_44X | CPU_FTRS_440x6 |
#endif
#ifdef CONFIG_E200
CPU_FTRS_E200 |
@@ -596,7 +595,9 @@ enum {
#ifdef CONFIG_40x
CPU_FTRS_40X &
#endif
-#ifdef CONFIG_44x
+#ifdef CONFIG_PPC_47x
+ CPU_FTRS_47X &
+#elif defined(CONFIG_44x)
CPU_FTRS_44X & CPU_FTRS_440x6 &
#endif
#ifdef CONFIG_E200
diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h
index a1769c0426f2..bf5d3b5291f1 100644
--- a/arch/powerpc/include/asm/mmu.h
+++ b/arch/powerpc/include/asm/mmu.h
@@ -162,15 +162,14 @@ enum {
#ifdef CONFIG_40x
MMU_FTR_TYPE_40x |
#endif
-#ifdef CONFIG_44x
+#ifdef CONFIG_PPC_47x
+ MMU_FTR_TYPE_47x | MMU_FTR_USE_TLBIVAX_BCAST | MMU_FTR_LOCK_BCAST_INVAL |
+#elif defined(CONFIG_44x)
MMU_FTR_TYPE_44x |
#endif
#if defined(CONFIG_E200) || defined(CONFIG_E500)
MMU_FTR_TYPE_FSL_E | MMU_FTR_BIG_PHYS | MMU_FTR_USE_TLBILX |
#endif
-#ifdef CONFIG_PPC_47x
- MMU_FTR_TYPE_47x | MMU_FTR_USE_TLBIVAX_BCAST | MMU_FTR_LOCK_BCAST_INVAL |
-#endif
#ifdef CONFIG_PPC_BOOK3S_32
MMU_FTR_USE_HIGH_BATS |
#endif
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 492c0b36aff6..cf80e6c8ed5e 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -1533,6 +1533,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
#endif /* CONFIG_40x */
#ifdef CONFIG_44x
+#ifndef CONFIG_PPC_47x
{
.pvr_mask = 0xf0000fff,
.pvr_value = 0x40000850,
@@ -1815,7 +1816,19 @@ static struct cpu_spec __initdata cpu_specs[] = {
.machine_check = machine_check_440A,
.platform = "ppc440",
},
-#ifdef CONFIG_PPC_47x
+ { /* default match */
+ .pvr_mask = 0x00000000,
+ .pvr_value = 0x00000000,
+ .cpu_name = "(generic 44x PPC)",
+ .cpu_features = CPU_FTRS_44X,
+ .cpu_user_features = COMMON_USER_BOOKE,
+ .mmu_features = MMU_FTR_TYPE_44x,
+ .icache_bsize = 32,
+ .dcache_bsize = 32,
+ .machine_check = machine_check_4xx,
+ .platform = "ppc440",
+ }
+#else /* CONFIG_PPC_47x */
{ /* 476 DD2 core */
.pvr_mask = 0xffffffff,
.pvr_value = 0x11a52080,
@@ -1872,19 +1885,19 @@ static struct cpu_spec __initdata cpu_specs[] = {
.machine_check = machine_check_47x,
.platform = "ppc470",
},
-#endif /* CONFIG_PPC_47x */
{ /* default match */
.pvr_mask = 0x00000000,
.pvr_value = 0x00000000,
- .cpu_name = "(generic 44x PPC)",
- .cpu_features = CPU_FTRS_44X,
+ .cpu_name = "(generic 47x PPC)",
+ .cpu_features = CPU_FTRS_47X,
.cpu_user_features = COMMON_USER_BOOKE,
- .mmu_features = MMU_FTR_TYPE_44x,
+ .mmu_features = MMU_FTR_TYPE_47x,
.icache_bsize = 32,
- .dcache_bsize = 32,
- .machine_check = machine_check_4xx,
- .platform = "ppc440",
+ .dcache_bsize = 128,
+ .machine_check = machine_check_47x,
+ .platform = "ppc470",
}
+#endif /* CONFIG_PPC_47x */
#endif /* CONFIG_44x */
#ifdef CONFIG_E200
{ /* e200z5 */
--
2.25.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v2 2/2] powerpc/44x: Don't support 47x code and non 47x code at the same time
2020-10-18 17:25 ` Christophe Leroy
@ 2020-10-18 17:25 ` Christophe Leroy
-1 siblings, 0 replies; 6+ messages in thread
From: Christophe Leroy @ 2020-10-18 17:25 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
Cc: linux-kernel, linuxppc-dev
440/460 variants and 470 variants are not compatible, no
need to make code supporting both and using MMU features.
Just use CONFIG_PPC_47x to decide what to build.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
v2: Move outside #ifdef CONFIG_PPC_47x a label "1:" used by 44x
---
arch/powerpc/kernel/entry_32.S | 11 +++--------
arch/powerpc/mm/nohash/tlb_low.S | 29 +++++++----------------------
2 files changed, 10 insertions(+), 30 deletions(-)
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 8cdc8bcde703..a425360deabb 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -439,15 +439,13 @@ syscall_exit_cont:
andis. r10,r0,DBCR0_IDM@h
bnel- load_dbcr0
#endif
-#ifdef CONFIG_44x
-BEGIN_MMU_FTR_SECTION
+#ifdef CONFIG_PPC_47x
lis r4,icache_44x_need_flush@ha
lwz r5,icache_44x_need_flush@l(r4)
cmplwi cr0,r5,0
bne- 2f
+#endif /* CONFIG_PPC_47x */
1:
-END_MMU_FTR_SECTION_IFCLR(MMU_FTR_TYPE_47x)
-#endif /* CONFIG_44x */
BEGIN_FTR_SECTION
lwarx r7,0,r1
END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
@@ -948,10 +946,7 @@ restore_kuap:
/* interrupts are hard-disabled at this point */
restore:
-#ifdef CONFIG_44x
-BEGIN_MMU_FTR_SECTION
- b 1f
-END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_47x)
+#if defined(CONFIG_44x) && !defined(CONFIG_PPC_47x)
lis r4,icache_44x_need_flush@ha
lwz r5,icache_44x_need_flush@l(r4)
cmplwi cr0,r5,0
diff --git a/arch/powerpc/mm/nohash/tlb_low.S b/arch/powerpc/mm/nohash/tlb_low.S
index eaeee402f96e..68797e072f55 100644
--- a/arch/powerpc/mm/nohash/tlb_low.S
+++ b/arch/powerpc/mm/nohash/tlb_low.S
@@ -92,36 +92,25 @@ _GLOBAL(__tlbil_va)
tlbsx. r6,0,r3
bne 10f
sync
-BEGIN_MMU_FTR_SECTION
- b 2f
-END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_47x)
+#ifndef CONFIG_PPC_47x
/* On 440 There are only 64 TLB entries, so r3 < 64, which means bit
* 22, is clear. Since 22 is the V bit in the TLB_PAGEID, loading this
* value will invalidate the TLB entry.
*/
tlbwe r6,r6,PPC44x_TLB_PAGEID
- isync
-10: wrtee r10
- blr
-2:
-#ifdef CONFIG_PPC_47x
+#else
oris r7,r6,0x8000 /* specify way explicitly */
clrrwi r4,r3,12 /* get an EPN for the hashing with V = 0 */
ori r4,r4,PPC47x_TLBE_SIZE
tlbwe r4,r7,0 /* write it */
+#endif /* !CONFIG_PPC_47x */
isync
- wrtee r10
+10: wrtee r10
blr
-#else /* CONFIG_PPC_47x */
-1: trap
- EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,0;
-#endif /* !CONFIG_PPC_47x */
_GLOBAL(_tlbil_all)
_GLOBAL(_tlbil_pid)
-BEGIN_MMU_FTR_SECTION
- b 2f
-END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_47x)
+#ifndef CONFIG_PPC_47x
li r3,0
sync
@@ -136,8 +125,7 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_47x)
isync
blr
-2:
-#ifdef CONFIG_PPC_47x
+#else
/* 476 variant. There's not simple way to do this, hopefully we'll
* try to limit the amount of such full invalidates
*/
@@ -179,11 +167,8 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_47x)
b 1b /* Then loop */
1: isync /* Sync shadows */
wrtee r11
-#else /* CONFIG_PPC_47x */
-1: trap
- EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,0;
-#endif /* !CONFIG_PPC_47x */
blr
+#endif /* !CONFIG_PPC_47x */
#ifdef CONFIG_PPC_47x
--
2.25.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v2 2/2] powerpc/44x: Don't support 47x code and non 47x code at the same time
@ 2020-10-18 17:25 ` Christophe Leroy
0 siblings, 0 replies; 6+ messages in thread
From: Christophe Leroy @ 2020-10-18 17:25 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman
Cc: linuxppc-dev, linux-kernel
440/460 variants and 470 variants are not compatible, no
need to make code supporting both and using MMU features.
Just use CONFIG_PPC_47x to decide what to build.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
v2: Move outside #ifdef CONFIG_PPC_47x a label "1:" used by 44x
---
arch/powerpc/kernel/entry_32.S | 11 +++--------
arch/powerpc/mm/nohash/tlb_low.S | 29 +++++++----------------------
2 files changed, 10 insertions(+), 30 deletions(-)
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 8cdc8bcde703..a425360deabb 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -439,15 +439,13 @@ syscall_exit_cont:
andis. r10,r0,DBCR0_IDM@h
bnel- load_dbcr0
#endif
-#ifdef CONFIG_44x
-BEGIN_MMU_FTR_SECTION
+#ifdef CONFIG_PPC_47x
lis r4,icache_44x_need_flush@ha
lwz r5,icache_44x_need_flush@l(r4)
cmplwi cr0,r5,0
bne- 2f
+#endif /* CONFIG_PPC_47x */
1:
-END_MMU_FTR_SECTION_IFCLR(MMU_FTR_TYPE_47x)
-#endif /* CONFIG_44x */
BEGIN_FTR_SECTION
lwarx r7,0,r1
END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
@@ -948,10 +946,7 @@ restore_kuap:
/* interrupts are hard-disabled at this point */
restore:
-#ifdef CONFIG_44x
-BEGIN_MMU_FTR_SECTION
- b 1f
-END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_47x)
+#if defined(CONFIG_44x) && !defined(CONFIG_PPC_47x)
lis r4,icache_44x_need_flush@ha
lwz r5,icache_44x_need_flush@l(r4)
cmplwi cr0,r5,0
diff --git a/arch/powerpc/mm/nohash/tlb_low.S b/arch/powerpc/mm/nohash/tlb_low.S
index eaeee402f96e..68797e072f55 100644
--- a/arch/powerpc/mm/nohash/tlb_low.S
+++ b/arch/powerpc/mm/nohash/tlb_low.S
@@ -92,36 +92,25 @@ _GLOBAL(__tlbil_va)
tlbsx. r6,0,r3
bne 10f
sync
-BEGIN_MMU_FTR_SECTION
- b 2f
-END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_47x)
+#ifndef CONFIG_PPC_47x
/* On 440 There are only 64 TLB entries, so r3 < 64, which means bit
* 22, is clear. Since 22 is the V bit in the TLB_PAGEID, loading this
* value will invalidate the TLB entry.
*/
tlbwe r6,r6,PPC44x_TLB_PAGEID
- isync
-10: wrtee r10
- blr
-2:
-#ifdef CONFIG_PPC_47x
+#else
oris r7,r6,0x8000 /* specify way explicitly */
clrrwi r4,r3,12 /* get an EPN for the hashing with V = 0 */
ori r4,r4,PPC47x_TLBE_SIZE
tlbwe r4,r7,0 /* write it */
+#endif /* !CONFIG_PPC_47x */
isync
- wrtee r10
+10: wrtee r10
blr
-#else /* CONFIG_PPC_47x */
-1: trap
- EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,0;
-#endif /* !CONFIG_PPC_47x */
_GLOBAL(_tlbil_all)
_GLOBAL(_tlbil_pid)
-BEGIN_MMU_FTR_SECTION
- b 2f
-END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_47x)
+#ifndef CONFIG_PPC_47x
li r3,0
sync
@@ -136,8 +125,7 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_47x)
isync
blr
-2:
-#ifdef CONFIG_PPC_47x
+#else
/* 476 variant. There's not simple way to do this, hopefully we'll
* try to limit the amount of such full invalidates
*/
@@ -179,11 +167,8 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_47x)
b 1b /* Then loop */
1: isync /* Sync shadows */
wrtee r11
-#else /* CONFIG_PPC_47x */
-1: trap
- EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,0;
-#endif /* !CONFIG_PPC_47x */
blr
+#endif /* !CONFIG_PPC_47x */
#ifdef CONFIG_PPC_47x
--
2.25.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v2 1/2] powerpc/44x: Don't support 440 when CONFIG_PPC_47x is set
2020-10-18 17:25 ` Christophe Leroy
@ 2020-12-10 11:29 ` Michael Ellerman
-1 siblings, 0 replies; 6+ messages in thread
From: Michael Ellerman @ 2020-12-10 11:29 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Christophe Leroy, Paul Mackerras,
Michael Ellerman
Cc: linux-kernel, linuxppc-dev
On Sun, 18 Oct 2020 17:25:17 +0000 (UTC), Christophe Leroy wrote:
> As stated in platform/44x/Kconfig, CONFIG_PPC_47x is not
> compatible with 440 and 460 variants.
>
> This is confirmed in asm/cache.h as L1_CACHE_SHIFT is different
> for 47x, meaning a kernel built for 47x will not run correctly
> on a 440.
>
> [...]
Applied to powerpc/next.
[1/2] powerpc/44x: Don't support 440 when CONFIG_PPC_47x is set
https://git.kernel.org/powerpc/c/8b8319b181fd9d6821703fef1228b4dcde613a16
[2/2] powerpc/44x: Don't support 47x code and non 47x code at the same time
https://git.kernel.org/powerpc/c/1f69aa0b89240653fdf708aada6a3d968447cce7
cheers
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2 1/2] powerpc/44x: Don't support 440 when CONFIG_PPC_47x is set
@ 2020-12-10 11:29 ` Michael Ellerman
0 siblings, 0 replies; 6+ messages in thread
From: Michael Ellerman @ 2020-12-10 11:29 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Christophe Leroy, Paul Mackerras,
Michael Ellerman
Cc: linuxppc-dev, linux-kernel
On Sun, 18 Oct 2020 17:25:17 +0000 (UTC), Christophe Leroy wrote:
> As stated in platform/44x/Kconfig, CONFIG_PPC_47x is not
> compatible with 440 and 460 variants.
>
> This is confirmed in asm/cache.h as L1_CACHE_SHIFT is different
> for 47x, meaning a kernel built for 47x will not run correctly
> on a 440.
>
> [...]
Applied to powerpc/next.
[1/2] powerpc/44x: Don't support 440 when CONFIG_PPC_47x is set
https://git.kernel.org/powerpc/c/8b8319b181fd9d6821703fef1228b4dcde613a16
[2/2] powerpc/44x: Don't support 47x code and non 47x code at the same time
https://git.kernel.org/powerpc/c/1f69aa0b89240653fdf708aada6a3d968447cce7
cheers
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2020-12-10 13:09 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-10-18 17:25 [PATCH v2 1/2] powerpc/44x: Don't support 440 when CONFIG_PPC_47x is set Christophe Leroy
2020-10-18 17:25 ` Christophe Leroy
2020-10-18 17:25 ` [PATCH v2 2/2] powerpc/44x: Don't support 47x code and non 47x code at the same time Christophe Leroy
2020-10-18 17:25 ` Christophe Leroy
2020-12-10 11:29 ` [PATCH v2 1/2] powerpc/44x: Don't support 440 when CONFIG_PPC_47x is set Michael Ellerman
2020-12-10 11:29 ` Michael Ellerman
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.