[PATCH v1 01/14] Revert "serial: uartps: Fix error path when alloc failed"

[PATCH v1 01/14] Revert "serial: uartps: Fix error path when alloc failed"

[Xiaogang.Chen]

From: Michal Simek <michal.simek@xilinx.com>

commit b6fd2dbbd649b89a3998528994665ded1e3fbf7f upstream.

This reverts commit 32cf21ac4edd6c0d5b9614368a83bcdc68acb031.

As Johan says, this driver needs a lot more work and these changes are
only going in the wrong direction:
  https://lkml.kernel.org/r/20190523091839.GC568@localhost

Reported-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/46cd7f039db847c08baa6508edd7854f7c8ff80f.1585905873.git.michal.simek@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/xilinx_uartps.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index d8910c5..f9297ee 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -1554,10 +1554,8 @@ static int cdns_uart_probe(struct platform_device *pdev)
 #ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
 	cdns_uart_console = devm_kzalloc(&pdev->dev, sizeof(*cdns_uart_console),
 					 GFP_KERNEL);
-	if (!cdns_uart_console) {
-		rc = -ENOMEM;
-		goto err_out_id;
-	}
+	if (!cdns_uart_console)
+		return -ENOMEM;
 
 	strncpy(cdns_uart_console->name, CDNS_UART_TTY_NAME,
 		sizeof(cdns_uart_console->name));
-- 
2.7.4

Re: [PATCH v1 01/14] Revert "serial: uartps: Fix error path when alloc failed"

[Greg Kroah-Hartman]

On Mon, Dec 21, 2020 at 02:47:06AM -0600, Xiaogang.Chen wrote:
> From: Michal Simek <michal.simek@xilinx.com>
> 
> commit b6fd2dbbd649b89a3998528994665ded1e3fbf7f upstream.
> 
> This reverts commit 32cf21ac4edd6c0d5b9614368a83bcdc68acb031.
> 
> As Johan says, this driver needs a lot more work and these changes are
> only going in the wrong direction:
>   https://lkml.kernel.org/r/20190523091839.GC568@localhost
> 
> Reported-by: Johan Hovold <johan@kernel.org>
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
> Cc: stable <stable@vger.kernel.org>
> Link: https://lore.kernel.org/r/46cd7f039db847c08baa6508edd7854f7c8ff80f.1585905873.git.michal.simek@xilinx.com
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> ---
>  drivers/tty/serial/xilinx_uartps.c | 6 ++----
>  1 file changed, 2 insertions(+), 4 deletions(-)
> 

Why are you sending us our own patches again?

What are we to do with these?  Do you want them applied to a stable
kernel tree?  If so, what one?

confused,

greg k-h

[PATCH v1 02/14] Revert "serial: uartps: Do not allow use aliases >= MAX_UART_INSTANCES"

[Xiaogang.Chen]

From: Michal Simek <michal.simek@xilinx.com>

commit 91c9dfa25c7f95b543c280e0edf1fd8de6e90985 upstream.

This reverts commit 2088cfd882d0403609bdf426e9b24372fe1b8337.

As Johan says, this driver needs a lot more work and these changes are
only going in the wrong direction:
  https://lkml.kernel.org/r/20190523091839.GC568@localhost

Reported-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/dac3898e3e32d963f357fb436ac9a7ac3cbcf933.1585905873.git.michal.simek@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/xilinx_uartps.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index f9297ee..d1d889d 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -1724,8 +1724,7 @@ static int cdns_uart_probe(struct platform_device *pdev)
 	uart_unregister_driver(cdns_uart_data->cdns_uart_driver);
 err_out_id:
 	mutex_lock(&bitmap_lock);
-	if (cdns_uart_data->id < MAX_UART_INSTANCES)
-		clear_bit(cdns_uart_data->id, bitmap);
+	clear_bit(cdns_uart_data->id, bitmap);
 	mutex_unlock(&bitmap_lock);
 	return rc;
 }
@@ -1750,8 +1749,7 @@ static int cdns_uart_remove(struct platform_device *pdev)
 	rc = uart_remove_one_port(cdns_uart_data->cdns_uart_driver, port);
 	port->mapbase = 0;
 	mutex_lock(&bitmap_lock);
-	if (cdns_uart_data->id < MAX_UART_INSTANCES)
-		clear_bit(cdns_uart_data->id, bitmap);
+	clear_bit(cdns_uart_data->id, bitmap);
 	mutex_unlock(&bitmap_lock);
 	clk_disable_unprepare(cdns_uart_data->uartclk);
 	clk_disable_unprepare(cdns_uart_data->pclk);
-- 
2.7.4

[PATCH v1 03/14] Revert "serial: uartps: Change uart ID port allocation"

[Xiaogang.Chen]

From: Michal Simek <michal.simek@xilinx.com>

commit 72d68197281e2ad313960504d10b0c41ff87fd55 upstream.

This reverts commit ae1cca3fa3478be92948dbbcd722390272032ade.

With setting up NR_PORTS to 16 to be able to use serial2 and higher
aliases and don't loose functionality which was intended by these changes.

As Johan says, this driver needs a lot more work and these changes are
only going in the wrong direction:
  https://lkml.kernel.org/r/20190523091839.GC568@localhost

Reported-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/a94931b65ce0089f76fb1fe6b446a08731bff754.1585905873.git.michal.simek@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/xilinx_uartps.c | 111 +++++--------------------------------
 1 file changed, 13 insertions(+), 98 deletions(-)

diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index d1d889d..3b497f3 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -27,6 +27,7 @@
 #define CDNS_UART_TTY_NAME	"ttyPS"
 #define CDNS_UART_NAME		"xuartps"
 #define CDNS_UART_MAJOR		0	/* use dynamic node allocation */
+#define CDNS_UART_NR_PORTS	16
 #define CDNS_UART_FIFO_SIZE	64	/* FIFO size */
 #define CDNS_UART_REGISTER_SPACE	0x1000
 #define TX_TIMEOUT		500000
@@ -1415,90 +1416,6 @@ static const struct of_device_id cdns_uart_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, cdns_uart_of_match);
 
-/*
- * Maximum number of instances without alias IDs but if there is alias
- * which target "< MAX_UART_INSTANCES" range this ID can't be used.
- */
-#define MAX_UART_INSTANCES	32
-
-/* Stores static aliases list */
-static DECLARE_BITMAP(alias_bitmap, MAX_UART_INSTANCES);
-static int alias_bitmap_initialized;
-
-/* Stores actual bitmap of allocated IDs with alias IDs together */
-static DECLARE_BITMAP(bitmap, MAX_UART_INSTANCES);
-/* Protect bitmap operations to have unique IDs */
-static DEFINE_MUTEX(bitmap_lock);
-
-static int cdns_get_id(struct platform_device *pdev)
-{
-	int id, ret;
-
-	mutex_lock(&bitmap_lock);
-
-	/* Alias list is stable that's why get alias bitmap only once */
-	if (!alias_bitmap_initialized) {
-		ret = of_alias_get_alias_list(cdns_uart_of_match, "serial",
-					      alias_bitmap, MAX_UART_INSTANCES);
-		if (ret && ret != -EOVERFLOW) {
-			mutex_unlock(&bitmap_lock);
-			return ret;
-		}
-
-		alias_bitmap_initialized++;
-	}
-
-	/* Make sure that alias ID is not taken by instance without alias */
-	bitmap_or(bitmap, bitmap, alias_bitmap, MAX_UART_INSTANCES);
-
-	dev_dbg(&pdev->dev, "Alias bitmap: %*pb\n",
-		MAX_UART_INSTANCES, bitmap);
-
-	/* Look for a serialN alias */
-	id = of_alias_get_id(pdev->dev.of_node, "serial");
-	if (id < 0) {
-		dev_warn(&pdev->dev,
-			 "No serial alias passed. Using the first free id\n");
-
-		/*
-		 * Start with id 0 and check if there is no serial0 alias
-		 * which points to device which is compatible with this driver.
-		 * If alias exists then try next free position.
-		 */
-		id = 0;
-
-		for (;;) {
-			dev_info(&pdev->dev, "Checking id %d\n", id);
-			id = find_next_zero_bit(bitmap, MAX_UART_INSTANCES, id);
-
-			/* No free empty instance */
-			if (id == MAX_UART_INSTANCES) {
-				dev_err(&pdev->dev, "No free ID\n");
-				mutex_unlock(&bitmap_lock);
-				return -EINVAL;
-			}
-
-			dev_dbg(&pdev->dev, "The empty id is %d\n", id);
-			/* Check if ID is empty */
-			if (!test_and_set_bit(id, bitmap)) {
-				/* Break the loop if bit is taken */
-				dev_dbg(&pdev->dev,
-					"Selected ID %d allocation passed\n",
-					id);
-				break;
-			}
-			dev_dbg(&pdev->dev,
-				"Selected ID %d allocation failed\n", id);
-			/* if taking bit fails then try next one */
-			id++;
-		}
-	}
-
-	mutex_unlock(&bitmap_lock);
-
-	return id;
-}
-
 /**
  * cdns_uart_probe - Platform driver probe
  * @pdev: Pointer to the platform device structure
@@ -1532,17 +1449,21 @@ static int cdns_uart_probe(struct platform_device *pdev)
 	if (!cdns_uart_uart_driver)
 		return -ENOMEM;
 
-	cdns_uart_data->id = cdns_get_id(pdev);
+	/* Look for a serialN alias */
+	cdns_uart_data->id = of_alias_get_id(pdev->dev.of_node, "serial");
 	if (cdns_uart_data->id < 0)
-		return cdns_uart_data->id;
+		cdns_uart_data->id = 0;
+
+	if (cdns_uart_data->id >= CDNS_UART_NR_PORTS) {
+		dev_err(&pdev->dev, "Cannot get uart_port structure\n");
+		return -ENODEV;
+	}
 
 	/* There is a need to use unique driver name */
 	driver_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "%s%d",
 				     CDNS_UART_NAME, cdns_uart_data->id);
-	if (!driver_name) {
-		rc = -ENOMEM;
-		goto err_out_id;
-	}
+	if (!driver_name)
+		return -ENOMEM;
 
 	cdns_uart_uart_driver->owner = THIS_MODULE;
 	cdns_uart_uart_driver->driver_name = driver_name;
@@ -1571,7 +1492,7 @@ static int cdns_uart_probe(struct platform_device *pdev)
 	rc = uart_register_driver(cdns_uart_uart_driver);
 	if (rc < 0) {
 		dev_err(&pdev->dev, "Failed to register driver\n");
-		goto err_out_id;
+		return rc;
 	}
 
 	cdns_uart_data->cdns_uart_driver = cdns_uart_uart_driver;
@@ -1722,10 +1643,7 @@ static int cdns_uart_probe(struct platform_device *pdev)
 	clk_disable_unprepare(cdns_uart_data->pclk);
 err_out_unregister_driver:
 	uart_unregister_driver(cdns_uart_data->cdns_uart_driver);
-err_out_id:
-	mutex_lock(&bitmap_lock);
-	clear_bit(cdns_uart_data->id, bitmap);
-	mutex_unlock(&bitmap_lock);
+
 	return rc;
 }
 
@@ -1748,9 +1666,6 @@ static int cdns_uart_remove(struct platform_device *pdev)
 #endif
 	rc = uart_remove_one_port(cdns_uart_data->cdns_uart_driver, port);
 	port->mapbase = 0;
-	mutex_lock(&bitmap_lock);
-	clear_bit(cdns_uart_data->id, bitmap);
-	mutex_unlock(&bitmap_lock);
 	clk_disable_unprepare(cdns_uart_data->uartclk);
 	clk_disable_unprepare(cdns_uart_data->pclk);
 	pm_runtime_disable(&pdev->dev);
-- 
2.7.4

[PATCH v1 04/14] Revert "serial: uartps: Move Port ID to device data structure"

[Xiaogang.Chen]

From: Michal Simek <michal.simek@xilinx.com>

commit 492cc08bc16c44e2e587362ada3f6269dee2be22 upstream.

This reverts commit bed25ac0e2b6ab8f9aed2d20bc9c3a2037311800.

As Johan says, this driver needs a lot more work and these changes are
only going in the wrong direction:
  https://lkml.kernel.org/r/20190523091839.GC568@localhost

Reported-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/eb0ec98fecdca9b79c1a3ac0c30c668b6973b193.1585905873.git.michal.simek@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/xilinx_uartps.c | 20 +++++++++-----------
 1 file changed, 9 insertions(+), 11 deletions(-)

diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 3b497f3..e7b8cb9 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -189,7 +189,6 @@ MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255");
  * @pclk:		APB clock
  * @cdns_uart_driver:	Pointer to UART driver
  * @baud:		Current baud rate
- * @id:			Port ID
  * @clk_rate_change_nb:	Notifier block for clock changes
  * @quirks:		Flags for RXBS support.
  */
@@ -199,7 +198,6 @@ struct cdns_uart {
 	struct clk		*pclk;
 	struct uart_driver	*cdns_uart_driver;
 	unsigned int		baud;
-	int			id;
 	struct notifier_block	clk_rate_change_nb;
 	u32			quirks;
 	bool cts_override;
@@ -1424,7 +1422,7 @@ MODULE_DEVICE_TABLE(of, cdns_uart_of_match);
  */
 static int cdns_uart_probe(struct platform_device *pdev)
 {
-	int rc, irq;
+	int rc, id, irq;
 	struct uart_port *port;
 	struct resource *res;
 	struct cdns_uart *cdns_uart_data;
@@ -1450,18 +1448,18 @@ static int cdns_uart_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	/* Look for a serialN alias */
-	cdns_uart_data->id = of_alias_get_id(pdev->dev.of_node, "serial");
-	if (cdns_uart_data->id < 0)
-		cdns_uart_data->id = 0;
+	id = of_alias_get_id(pdev->dev.of_node, "serial");
+	if (id < 0)
+		id = 0;
 
-	if (cdns_uart_data->id >= CDNS_UART_NR_PORTS) {
+	if (id >= CDNS_UART_NR_PORTS) {
 		dev_err(&pdev->dev, "Cannot get uart_port structure\n");
 		return -ENODEV;
 	}
 
 	/* There is a need to use unique driver name */
 	driver_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "%s%d",
-				     CDNS_UART_NAME, cdns_uart_data->id);
+				     CDNS_UART_NAME, id);
 	if (!driver_name)
 		return -ENOMEM;
 
@@ -1469,7 +1467,7 @@ static int cdns_uart_probe(struct platform_device *pdev)
 	cdns_uart_uart_driver->driver_name = driver_name;
 	cdns_uart_uart_driver->dev_name	= CDNS_UART_TTY_NAME;
 	cdns_uart_uart_driver->major = CDNS_UART_MAJOR;
-	cdns_uart_uart_driver->minor = cdns_uart_data->id;
+	cdns_uart_uart_driver->minor = id;
 	cdns_uart_uart_driver->nr = 1;
 
 #ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
@@ -1480,7 +1478,7 @@ static int cdns_uart_probe(struct platform_device *pdev)
 
 	strncpy(cdns_uart_console->name, CDNS_UART_TTY_NAME,
 		sizeof(cdns_uart_console->name));
-	cdns_uart_console->index = cdns_uart_data->id;
+	cdns_uart_console->index = id;
 	cdns_uart_console->write = cdns_uart_console_write;
 	cdns_uart_console->device = uart_console_device;
 	cdns_uart_console->setup = cdns_uart_console_setup;
@@ -1502,7 +1500,7 @@ static int cdns_uart_probe(struct platform_device *pdev)
 	 * registration because tty_driver structure is not filled.
 	 * name_base is 0 by default.
 	 */
-	cdns_uart_uart_driver->tty_driver->name_base = cdns_uart_data->id;
+	cdns_uart_uart_driver->tty_driver->name_base = id;
 
 	match = of_match_node(cdns_uart_of_match, pdev->dev.of_node);
 	if (match && match->data) {
-- 
2.7.4

[PATCH v1 05/14] Revert "serial: uartps: Register own uart console and driver structures"

[Xiaogang.Chen]

From: Michal Simek <michal.simek@xilinx.com>

commit 18cc7ac8a28e28cd005c2475f52576cfe10cabfb upstream.

This reverts commit 024ca329bfb9a948f76eaff3243e21b7e70182f2.

As Johan says, this driver needs a lot more work and these changes are
only going in the wrong direction:
  https://lkml.kernel.org/r/20190523091839.GC568@localhost

Reported-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1ee35667e36a8efddee381df5fe495ad65f4d15c.1585905873.git.michal.simek@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/xilinx_uartps.c | 95 ++++++++++++++++----------------------
 1 file changed, 40 insertions(+), 55 deletions(-)

diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index e7b8cb9..7a9b360 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -27,6 +27,7 @@
 #define CDNS_UART_TTY_NAME	"ttyPS"
 #define CDNS_UART_NAME		"xuartps"
 #define CDNS_UART_MAJOR		0	/* use dynamic node allocation */
+#define CDNS_UART_MINOR		0	/* works best with devtmpfs */
 #define CDNS_UART_NR_PORTS	16
 #define CDNS_UART_FIFO_SIZE	64	/* FIFO size */
 #define CDNS_UART_REGISTER_SPACE	0x1000
@@ -1144,6 +1145,8 @@ static const struct uart_ops cdns_uart_ops = {
 #endif
 };
 
+static struct uart_driver cdns_uart_uart_driver;
+
 #ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
 /**
  * cdns_uart_console_putchar - write the character to the FIFO buffer
@@ -1283,6 +1286,16 @@ static int cdns_uart_console_setup(struct console *co, char *options)
 
 	return uart_set_options(port, co, baud, parity, bits, flow);
 }
+
+static struct console cdns_uart_console = {
+	.name	= CDNS_UART_TTY_NAME,
+	.write	= cdns_uart_console_write,
+	.device	= uart_console_device,
+	.setup	= cdns_uart_console_setup,
+	.flags	= CON_PRINTBUFFER,
+	.index	= -1, /* Specified on the cmdline (e.g. console=ttyPS ) */
+	.data	= &cdns_uart_uart_driver,
+};
 #endif /* CONFIG_SERIAL_XILINX_PS_UART_CONSOLE */
 
 #ifdef CONFIG_PM_SLEEP
@@ -1414,6 +1427,9 @@ static const struct of_device_id cdns_uart_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, cdns_uart_of_match);
 
+/* Temporary variable for storing number of instances */
+static int instances;
+
 /**
  * cdns_uart_probe - Platform driver probe
  * @pdev: Pointer to the platform device structure
@@ -1427,11 +1443,6 @@ static int cdns_uart_probe(struct platform_device *pdev)
 	struct resource *res;
 	struct cdns_uart *cdns_uart_data;
 	const struct of_device_id *match;
-	struct uart_driver *cdns_uart_uart_driver;
-	char *driver_name;
-#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
-	struct console *cdns_uart_console;
-#endif
 
 	cdns_uart_data = devm_kzalloc(&pdev->dev, sizeof(*cdns_uart_data),
 			GFP_KERNEL);
@@ -1441,12 +1452,6 @@ static int cdns_uart_probe(struct platform_device *pdev)
 	if (!port)
 		return -ENOMEM;
 
-	cdns_uart_uart_driver = devm_kzalloc(&pdev->dev,
-					     sizeof(*cdns_uart_uart_driver),
-					     GFP_KERNEL);
-	if (!cdns_uart_uart_driver)
-		return -ENOMEM;
-
 	/* Look for a serialN alias */
 	id = of_alias_get_id(pdev->dev.of_node, "serial");
 	if (id < 0)
@@ -1457,50 +1462,25 @@ static int cdns_uart_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	/* There is a need to use unique driver name */
-	driver_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "%s%d",
-				     CDNS_UART_NAME, id);
-	if (!driver_name)
-		return -ENOMEM;
-
-	cdns_uart_uart_driver->owner = THIS_MODULE;
-	cdns_uart_uart_driver->driver_name = driver_name;
-	cdns_uart_uart_driver->dev_name	= CDNS_UART_TTY_NAME;
-	cdns_uart_uart_driver->major = CDNS_UART_MAJOR;
-	cdns_uart_uart_driver->minor = id;
-	cdns_uart_uart_driver->nr = 1;
-
+	if (!cdns_uart_uart_driver.state) {
+		cdns_uart_uart_driver.owner = THIS_MODULE;
+		cdns_uart_uart_driver.driver_name = CDNS_UART_NAME;
+		cdns_uart_uart_driver.dev_name = CDNS_UART_TTY_NAME;
+		cdns_uart_uart_driver.major = CDNS_UART_MAJOR;
+		cdns_uart_uart_driver.minor = CDNS_UART_MINOR;
+		cdns_uart_uart_driver.nr = CDNS_UART_NR_PORTS;
 #ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
-	cdns_uart_console = devm_kzalloc(&pdev->dev, sizeof(*cdns_uart_console),
-					 GFP_KERNEL);
-	if (!cdns_uart_console)
-		return -ENOMEM;
-
-	strncpy(cdns_uart_console->name, CDNS_UART_TTY_NAME,
-		sizeof(cdns_uart_console->name));
-	cdns_uart_console->index = id;
-	cdns_uart_console->write = cdns_uart_console_write;
-	cdns_uart_console->device = uart_console_device;
-	cdns_uart_console->setup = cdns_uart_console_setup;
-	cdns_uart_console->flags = CON_PRINTBUFFER;
-	cdns_uart_console->data = cdns_uart_uart_driver;
-	cdns_uart_uart_driver->cons = cdns_uart_console;
+		cdns_uart_uart_driver.cons = &cdns_uart_console;
 #endif
 
-	rc = uart_register_driver(cdns_uart_uart_driver);
-	if (rc < 0) {
-		dev_err(&pdev->dev, "Failed to register driver\n");
-		return rc;
+		rc = uart_register_driver(&cdns_uart_uart_driver);
+		if (rc < 0) {
+			dev_err(&pdev->dev, "Failed to register driver\n");
+			return rc;
+		}
 	}
 
-	cdns_uart_data->cdns_uart_driver = cdns_uart_uart_driver;
-
-	/*
-	 * Setting up proper name_base needs to be done after uart
-	 * registration because tty_driver structure is not filled.
-	 * name_base is 0 by default.
-	 */
-	cdns_uart_uart_driver->tty_driver->name_base = id;
+	cdns_uart_data->cdns_uart_driver = &cdns_uart_uart_driver;
 
 	match = of_match_node(cdns_uart_of_match, pdev->dev.of_node);
 	if (match && match->data) {
@@ -1578,6 +1558,7 @@ static int cdns_uart_probe(struct platform_device *pdev)
 	port->ops	= &cdns_uart_ops;
 	port->fifosize	= CDNS_UART_FIFO_SIZE;
 	port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_XILINX_PS_UART_CONSOLE);
+	port->line	= id;
 
 	/*
 	 * Register the port.
@@ -1609,7 +1590,7 @@ static int cdns_uart_probe(struct platform_device *pdev)
 		console_port = port;
 #endif
 
-	rc = uart_add_one_port(cdns_uart_uart_driver, port);
+	rc = uart_add_one_port(&cdns_uart_uart_driver, port);
 	if (rc) {
 		dev_err(&pdev->dev,
 			"uart_add_one_port() failed; err=%i\n", rc);
@@ -1619,12 +1600,15 @@ static int cdns_uart_probe(struct platform_device *pdev)
 #ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
 	/* This is not port which is used for console that's why clean it up */
 	if (console_port == port &&
-	    !(cdns_uart_uart_driver->cons->flags & CON_ENABLED))
+	    !(cdns_uart_uart_driver.cons->flags & CON_ENABLED))
 		console_port = NULL;
 #endif
 
 	cdns_uart_data->cts_override = of_property_read_bool(pdev->dev.of_node,
 							     "cts-override");
+
+	instances++;
+
 	return 0;
 
 err_out_pm_disable:
@@ -1640,8 +1624,8 @@ static int cdns_uart_probe(struct platform_device *pdev)
 err_out_clk_dis_pclk:
 	clk_disable_unprepare(cdns_uart_data->pclk);
 err_out_unregister_driver:
-	uart_unregister_driver(cdns_uart_data->cdns_uart_driver);
-
+	if (!instances)
+		uart_unregister_driver(cdns_uart_data->cdns_uart_driver);
 	return rc;
 }
 
@@ -1676,7 +1660,8 @@ static int cdns_uart_remove(struct platform_device *pdev)
 		console_port = NULL;
 #endif
 
-	uart_unregister_driver(cdns_uart_data->cdns_uart_driver);
+	if (!--instances)
+		uart_unregister_driver(cdns_uart_data->cdns_uart_driver);
 	return rc;
 }
 
-- 
2.7.4

[PATCH v1 06/14] drm/i915/gt: Update PMINTRMSK holding fw

[Xiaogang.Chen]

From: Chris Wilson <chris@chris-wilson.co.uk>

commit e1eb075c5051987fbbadbc0fb8211679df657721 upstream.

If we use a non-forcewaked write to PMINTRMSK, it does not take effect
until much later, if at all, causing a loss of RPS interrupts and no GPU
reclocking, leaving the GPU running at the wrong frequency for long
periods of time.

Reported-by: Francisco Jerez <currojerez@riseup.net>
Suggested-by: Francisco Jerez <currojerez@riseup.net>
Fixes: 35cc7f32c298 ("drm/i915/gt: Use non-forcewake writes for RPS")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Francisco Jerez <currojerez@riseup.net>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Cc: <stable@vger.kernel.org> # v5.6+
Link: https://patchwork.freedesktop.org/patch/msgid/20200415170318.16771-2-chris@chris-wilson.co.uk
(cherry picked from commit a080bd994c4023042a2b605c65fa10a25933f636)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/i915/gt/intel_rps.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/gt/intel_rps.c b/drivers/gpu/drm/i915/gt/intel_rps.c
index b2d2459..8accea0 100644
--- a/drivers/gpu/drm/i915/gt/intel_rps.c
+++ b/drivers/gpu/drm/i915/gt/intel_rps.c
@@ -83,7 +83,8 @@ static void rps_enable_interrupts(struct intel_rps *rps)
 	gen6_gt_pm_enable_irq(gt, rps->pm_events);
 	spin_unlock_irq(&gt->irq_lock);
 
-	set(gt->uncore, GEN6_PMINTRMSK, rps_pm_mask(rps, rps->cur_freq));
+	intel_uncore_write(gt->uncore,
+			   GEN6_PMINTRMSK, rps_pm_mask(rps, rps->last_freq));
 }
 
 static void gen6_rps_reset_interrupts(struct intel_rps *rps)
@@ -117,7 +118,8 @@ static void rps_disable_interrupts(struct intel_rps *rps)
 
 	rps->pm_events = 0;
 
-	set(gt->uncore, GEN6_PMINTRMSK, rps_pm_sanitize_mask(rps, ~0u));
+	intel_uncore_write(gt->uncore,
+			   GEN6_PMINTRMSK, rps_pm_sanitize_mask(rps, ~0u));
 
 	spin_lock_irq(&gt->irq_lock);
 	gen6_gt_pm_disable_irq(gt, GEN6_PM_RPS_EVENTS);
-- 
2.7.4