[PATCH v2 1/2] ppc: Fix build with --without-default-devices

[Greg Kurz <groug@kaod.org>]

Linking of the qemu-system-ppc64 fails on a POWER9 host when
--without-default-devices is passed to configure:

$ ./configure --without-default-devices \
              --target-list=ppc64-softmmu && make

...

libqemu-ppc64-softmmu.fa.p/hw_ppc_e500.c.o: In function `ppce500_init_mpic_kvm':
/home/greg/Work/qemu/qemu-ppc/build/../hw/ppc/e500.c:777: undefined reference to `kvm_openpic_connect_vcpu'
libqemu-ppc64-softmmu.fa.p/hw_ppc_spapr_irq.c.o: In function `spapr_irq_check':
/home/greg/Work/qemu/qemu-ppc/build/../hw/ppc/spapr_irq.c:189: undefined reference to `xics_kvm_has_broken_disconnect'
libqemu-ppc64-softmmu.fa.p/hw_intc_spapr_xive.c.o: In function `spapr_xive_post_load':
/home/greg/Work/qemu/qemu-ppc/build/../hw/intc/spapr_xive.c:530: undefined reference to `kvmppc_xive_post_load'

... and tons of other symbols belonging to the KVM backend of the
openpic, XICS and XIVE interrupt controllers.

It turns out that OPENPIC_KVM, XICS_KVM and XIVE_KVM are marked
to depend on KVM but this has no effect when minikconf runs in
allnoconfig mode. Such reverse dependencies should rather be
handled with a 'select' statement, eg.

config OPENPIC
    select OPENPIC_KVM if KVM

or even better by getting rid of the intermediate _KVM config
and directly checking CONFIG_KVM in the meson.build file:

specific_ss.add(when: ['CONFIG_KVM', 'CONFIG_OPENPIC'],
		if_true: files('openpic_kvm.c'))

Go for the latter with OPENPIC, XICS and XIVE. While here also move
XIVE_SPAPR to hw/intc/Kconfig where it belongs.

This went unnoticed so far because CI doesn't test the build with
--without-default-devices and KVM enabled on a POWER host.

Signed-off-by: Greg Kurz <groug@kaod.org>
---
v2: - check CONFIG_KVM in the meson.build as suggested by Paolo
---
 hw/intc/Kconfig     |   14 +++++---------
 hw/intc/meson.build |    9 ++++++---
 hw/ppc/Kconfig      |   15 ---------------
 3 files changed, 11 insertions(+), 27 deletions(-)

diff --git a/hw/intc/Kconfig b/hw/intc/Kconfig
index 468d548ca771..ee60d4bf7857 100644
--- a/hw/intc/Kconfig
+++ b/hw/intc/Kconfig
@@ -30,23 +30,19 @@ config ARM_GIC_KVM
     default y
     depends on ARM_GIC && KVM
 
-config OPENPIC_KVM
-    bool
-    default y
-    depends on OPENPIC && KVM
-
 config XICS
     bool
-    depends on POWERNV || PSERIES
 
 config XICS_SPAPR
     bool
     select XICS
 
-config XICS_KVM
+config XIVE
     bool
-    default y
-    depends on XICS && KVM
+
+config XIVE_SPAPR
+    bool
+    select XIVE
 
 config ALLWINNER_A10_PIC
     bool
diff --git a/hw/intc/meson.build b/hw/intc/meson.build
index 68da782ad2c5..b6c9218908e3 100644
--- a/hw/intc/meson.build
+++ b/hw/intc/meson.build
@@ -39,7 +39,8 @@ specific_ss.add(when: 'CONFIG_LOONGSON_LIOINTC', if_true: files('loongson_lioint
 specific_ss.add(when: 'CONFIG_MIPS_CPS', if_true: files('mips_gic.c'))
 specific_ss.add(when: 'CONFIG_OMAP', if_true: files('omap_intc.c'))
 specific_ss.add(when: 'CONFIG_OMPIC', if_true: files('ompic.c'))
-specific_ss.add(when: 'CONFIG_OPENPIC_KVM', if_true: files('openpic_kvm.c'))
+specific_ss.add(when: ['CONFIG_KVM', 'CONFIG_OPENPIC'],
+		if_true: files('openpic_kvm.c'))
 specific_ss.add(when: 'CONFIG_POWERNV', if_true: files('xics_pnv.c', 'pnv_xive.c'))
 specific_ss.add(when: 'CONFIG_PPC_UIC', if_true: files('ppc-uic.c'))
 specific_ss.add(when: 'CONFIG_RASPI', if_true: files('bcm2835_ic.c', 'bcm2836_control.c'))
@@ -50,8 +51,10 @@ specific_ss.add(when: 'CONFIG_SH4', if_true: files('sh_intc.c'))
 specific_ss.add(when: 'CONFIG_SIFIVE_CLINT', if_true: files('sifive_clint.c'))
 specific_ss.add(when: 'CONFIG_SIFIVE_PLIC', if_true: files('sifive_plic.c'))
 specific_ss.add(when: 'CONFIG_XICS', if_true: files('xics.c'))
-specific_ss.add(when: 'CONFIG_XICS_KVM', if_true: files('xics_kvm.c'))
+specific_ss.add(when: ['CONFIG_KVM', 'CONFIG_XICS'],
+		if_true: files('xics_kvm.c'))
 specific_ss.add(when: 'CONFIG_XICS_SPAPR', if_true: files('xics_spapr.c'))
 specific_ss.add(when: 'CONFIG_XIVE', if_true: files('xive.c'))
-specific_ss.add(when: 'CONFIG_XIVE_KVM', if_true: files('spapr_xive_kvm.c'))
+specific_ss.add(when: ['CONFIG_KVM', 'CONFIG_XIVE'],
+		if_true: files('spapr_xive_kvm.c'))
 specific_ss.add(when: 'CONFIG_XIVE_SPAPR', if_true: files('spapr_xive.c'))
diff --git a/hw/ppc/Kconfig b/hw/ppc/Kconfig
index 982d55f5875c..064bd6edd83d 100644
--- a/hw/ppc/Kconfig
+++ b/hw/ppc/Kconfig
@@ -129,21 +129,6 @@ config VIRTEX
     select XILINX_ETHLITE
     select FDT_PPC
 
-config XIVE
-    bool
-    depends on POWERNV || PSERIES
-
-config XIVE_SPAPR
-    bool
-    default y
-    depends on PSERIES
-    select XIVE
-
-config XIVE_KVM
-    bool
-    default y
-    depends on XIVE_SPAPR && KVM
-
 # Only used by 64-bit targets
 config FW_CFG_PPC
     bool