* [PATCH v2 2/2] pnv: Fix reverse dependency on PCI express root ports
2020-12-23 19:26 [PATCH v2 1/2] ppc: Fix build with --without-default-devices Greg Kurz
@ 2020-12-23 19:26 ` Greg Kurz
2020-12-24 10:28 ` Paolo Bonzini
2020-12-24 10:35 ` Cédric Le Goater
2020-12-24 8:26 ` [PATCH v2 1/2] ppc: Fix build with --without-default-devices Cédric Le Goater
2020-12-24 10:58 ` Philippe Mathieu-Daudé
2 siblings, 2 replies; 10+ messages in thread
From: Greg Kurz @ 2020-12-23 19:26 UTC (permalink / raw)
To: qemu-devel; +Cc: Paolo Bonzini, qemu-ppc, Cédric Le Goater, David Gibson
qemu-system-ppc64 built with --without-default-devices crashes:
Type 'pnv-phb4-root-port' is missing its parent 'pcie-root-port-base'
Aborted (core dumped)
Have POWERNV to select PCIE_PORT. This is done through a
new PCI_POWERNV config in hw/pci-host/Kconfig since POWERNV
doesn't have a direct dependency on PCI. For this reason,
PCI_EXPRESS and MSI_NONBROKEN are also moved under
PCI_POWERNV.
Signed-off-by: Greg Kurz <groug@kaod.org>
---
hw/pci-host/Kconfig | 5 +++++
hw/pci-host/meson.build | 2 +-
hw/ppc/Kconfig | 3 +--
3 files changed, 7 insertions(+), 3 deletions(-)
diff --git a/hw/pci-host/Kconfig b/hw/pci-host/Kconfig
index 036a61877a73..eb03f0489d08 100644
--- a/hw/pci-host/Kconfig
+++ b/hw/pci-host/Kconfig
@@ -60,3 +60,8 @@ config PCI_BONITO
select PCI
select UNIMP
bool
+
+config PCI_POWERNV
+ select PCI_EXPRESS
+ select MSI_NONBROKEN
+ select PCIE_PORT
diff --git a/hw/pci-host/meson.build b/hw/pci-host/meson.build
index e6d1b896848c..da9d1a9964a8 100644
--- a/hw/pci-host/meson.build
+++ b/hw/pci-host/meson.build
@@ -23,7 +23,7 @@ pci_ss.add(when: 'CONFIG_VERSATILE_PCI', if_true: files('versatile.c'))
softmmu_ss.add_all(when: 'CONFIG_PCI', if_true: pci_ss)
-specific_ss.add(when: 'CONFIG_POWERNV', if_true: files(
+specific_ss.add(when: 'CONFIG_PCI_POWERNV', if_true: files(
'pnv_phb3.c',
'pnv_phb3_msi.c',
'pnv_phb3_pbcq.c',
diff --git a/hw/ppc/Kconfig b/hw/ppc/Kconfig
index 064bd6edd83d..501b9868568e 100644
--- a/hw/ppc/Kconfig
+++ b/hw/ppc/Kconfig
@@ -29,8 +29,7 @@ config POWERNV
select XICS
select XIVE
select FDT_PPC
- select PCI_EXPRESS
- select MSI_NONBROKEN
+ select PCI_POWERNV
config PPC405
bool
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH v2 2/2] pnv: Fix reverse dependency on PCI express root ports
2020-12-23 19:26 ` [PATCH v2 2/2] pnv: Fix reverse dependency on PCI express root ports Greg Kurz
@ 2020-12-24 10:28 ` Paolo Bonzini
2020-12-24 10:35 ` Cédric Le Goater
1 sibling, 0 replies; 10+ messages in thread
From: Paolo Bonzini @ 2020-12-24 10:28 UTC (permalink / raw)
To: Greg Kurz, qemu-devel; +Cc: qemu-ppc, Cédric Le Goater, David Gibson
On 23/12/20 20:26, Greg Kurz wrote:
> This is done through a
> new PCI_POWERNV config in hw/pci-host/Kconfig
Yes, this is cleaner. Thanks!
Paolo
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v2 2/2] pnv: Fix reverse dependency on PCI express root ports
2020-12-23 19:26 ` [PATCH v2 2/2] pnv: Fix reverse dependency on PCI express root ports Greg Kurz
2020-12-24 10:28 ` Paolo Bonzini
@ 2020-12-24 10:35 ` Cédric Le Goater
1 sibling, 0 replies; 10+ messages in thread
From: Cédric Le Goater @ 2020-12-24 10:35 UTC (permalink / raw)
To: Greg Kurz, qemu-devel; +Cc: Paolo Bonzini, qemu-ppc, David Gibson
On 12/23/20 8:26 PM, Greg Kurz wrote:
> qemu-system-ppc64 built with --without-default-devices crashes:
>
> Type 'pnv-phb4-root-port' is missing its parent 'pcie-root-port-base'
> Aborted (core dumped)
>
> Have POWERNV to select PCIE_PORT. This is done through a
> new PCI_POWERNV config in hw/pci-host/Kconfig since POWERNV
> doesn't have a direct dependency on PCI. For this reason,
> PCI_EXPRESS and MSI_NONBROKEN are also moved under
> PCI_POWERNV.
>
> Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Thanks,
C.
> ---
> hw/pci-host/Kconfig | 5 +++++
> hw/pci-host/meson.build | 2 +-
> hw/ppc/Kconfig | 3 +--
> 3 files changed, 7 insertions(+), 3 deletions(-)
>
> diff --git a/hw/pci-host/Kconfig b/hw/pci-host/Kconfig
> index 036a61877a73..eb03f0489d08 100644
> --- a/hw/pci-host/Kconfig
> +++ b/hw/pci-host/Kconfig
> @@ -60,3 +60,8 @@ config PCI_BONITO
> select PCI
> select UNIMP
> bool
> +
> +config PCI_POWERNV
> + select PCI_EXPRESS
> + select MSI_NONBROKEN
> + select PCIE_PORT
> diff --git a/hw/pci-host/meson.build b/hw/pci-host/meson.build
> index e6d1b896848c..da9d1a9964a8 100644
> --- a/hw/pci-host/meson.build
> +++ b/hw/pci-host/meson.build
> @@ -23,7 +23,7 @@ pci_ss.add(when: 'CONFIG_VERSATILE_PCI', if_true: files('versatile.c'))
>
> softmmu_ss.add_all(when: 'CONFIG_PCI', if_true: pci_ss)
>
> -specific_ss.add(when: 'CONFIG_POWERNV', if_true: files(
> +specific_ss.add(when: 'CONFIG_PCI_POWERNV', if_true: files(
> 'pnv_phb3.c',
> 'pnv_phb3_msi.c',
> 'pnv_phb3_pbcq.c',
> diff --git a/hw/ppc/Kconfig b/hw/ppc/Kconfig
> index 064bd6edd83d..501b9868568e 100644
> --- a/hw/ppc/Kconfig
> +++ b/hw/ppc/Kconfig
> @@ -29,8 +29,7 @@ config POWERNV
> select XICS
> select XIVE
> select FDT_PPC
> - select PCI_EXPRESS
> - select MSI_NONBROKEN
> + select PCI_POWERNV
>
> config PPC405
> bool
>
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v2 1/2] ppc: Fix build with --without-default-devices
2020-12-23 19:26 [PATCH v2 1/2] ppc: Fix build with --without-default-devices Greg Kurz
2020-12-23 19:26 ` [PATCH v2 2/2] pnv: Fix reverse dependency on PCI express root ports Greg Kurz
@ 2020-12-24 8:26 ` Cédric Le Goater
2020-12-24 10:29 ` Paolo Bonzini
2020-12-24 10:58 ` Philippe Mathieu-Daudé
2 siblings, 1 reply; 10+ messages in thread
From: Cédric Le Goater @ 2020-12-24 8:26 UTC (permalink / raw)
To: Greg Kurz, qemu-devel; +Cc: Paolo Bonzini, qemu-ppc, David Gibson
On 12/23/20 8:26 PM, Greg Kurz wrote:
> Linking of the qemu-system-ppc64 fails on a POWER9 host when
> --without-default-devices is passed to configure:
>
> $ ./configure --without-default-devices \
> --target-list=ppc64-softmmu && make
>
> ...
>
> libqemu-ppc64-softmmu.fa.p/hw_ppc_e500.c.o: In function `ppce500_init_mpic_kvm':
> /home/greg/Work/qemu/qemu-ppc/build/../hw/ppc/e500.c:777: undefined reference to `kvm_openpic_connect_vcpu'
> libqemu-ppc64-softmmu.fa.p/hw_ppc_spapr_irq.c.o: In function `spapr_irq_check':
> /home/greg/Work/qemu/qemu-ppc/build/../hw/ppc/spapr_irq.c:189: undefined reference to `xics_kvm_has_broken_disconnect'
> libqemu-ppc64-softmmu.fa.p/hw_intc_spapr_xive.c.o: In function `spapr_xive_post_load':
> /home/greg/Work/qemu/qemu-ppc/build/../hw/intc/spapr_xive.c:530: undefined reference to `kvmppc_xive_post_load'
>
> ... and tons of other symbols belonging to the KVM backend of the
> openpic, XICS and XIVE interrupt controllers.
>
> It turns out that OPENPIC_KVM, XICS_KVM and XIVE_KVM are marked
> to depend on KVM but this has no effect when minikconf runs in
> allnoconfig mode. Such reverse dependencies should rather be
> handled with a 'select' statement, eg.
>
> config OPENPIC
> select OPENPIC_KVM if KVM
>
> or even better by getting rid of the intermediate _KVM config
> and directly checking CONFIG_KVM in the meson.build file:
>
> specific_ss.add(when: ['CONFIG_KVM', 'CONFIG_OPENPIC'],
> if_true: files('openpic_kvm.c'))
>
> Go for the latter with OPENPIC, XICS and XIVE. While here also move
> XIVE_SPAPR to hw/intc/Kconfig where it belongs.
>
> This went unnoticed so far because CI doesn't test the build with
> --without-default-devices and KVM enabled on a POWER host.
>
> Signed-off-by: Greg Kurz <groug@kaod.org>
> ---
> v2: - check CONFIG_KVM in the meson.build as suggested by Paolo
> ---
> hw/intc/Kconfig | 14 +++++---------
> hw/intc/meson.build | 9 ++++++---
> hw/ppc/Kconfig | 15 ---------------
> 3 files changed, 11 insertions(+), 27 deletions(-)
>
> diff --git a/hw/intc/Kconfig b/hw/intc/Kconfig
> index 468d548ca771..ee60d4bf7857 100644
> --- a/hw/intc/Kconfig
> +++ b/hw/intc/Kconfig
> @@ -30,23 +30,19 @@ config ARM_GIC_KVM
> default y
> depends on ARM_GIC && KVM
>
> -config OPENPIC_KVM
> - bool
> - default y
> - depends on OPENPIC && KVM
> -
> config XICS
> bool
> - depends on POWERNV || PSERIES
>
> config XICS_SPAPR
> bool
> select XICS
>
> -config XICS_KVM
> +config XIVE
> bool
> - default y
> - depends on XICS && KVM
> +
> +config XIVE_SPAPR
> + bool
> + select XIVE
>
> config ALLWINNER_A10_PIC
> bool
> diff --git a/hw/intc/meson.build b/hw/intc/meson.build
> index 68da782ad2c5..b6c9218908e3 100644
> --- a/hw/intc/meson.build
> +++ b/hw/intc/meson.build
> @@ -39,7 +39,8 @@ specific_ss.add(when: 'CONFIG_LOONGSON_LIOINTC', if_true: files('loongson_lioint
> specific_ss.add(when: 'CONFIG_MIPS_CPS', if_true: files('mips_gic.c'))
> specific_ss.add(when: 'CONFIG_OMAP', if_true: files('omap_intc.c'))
> specific_ss.add(when: 'CONFIG_OMPIC', if_true: files('ompic.c'))
> -specific_ss.add(when: 'CONFIG_OPENPIC_KVM', if_true: files('openpic_kvm.c'))
> +specific_ss.add(when: ['CONFIG_KVM', 'CONFIG_OPENPIC'],
> + if_true: files('openpic_kvm.c'))
> specific_ss.add(when: 'CONFIG_POWERNV', if_true: files('xics_pnv.c', 'pnv_xive.c'))
> specific_ss.add(when: 'CONFIG_PPC_UIC', if_true: files('ppc-uic.c'))
> specific_ss.add(when: 'CONFIG_RASPI', if_true: files('bcm2835_ic.c', 'bcm2836_control.c'))
> @@ -50,8 +51,10 @@ specific_ss.add(when: 'CONFIG_SH4', if_true: files('sh_intc.c'))
> specific_ss.add(when: 'CONFIG_SIFIVE_CLINT', if_true: files('sifive_clint.c'))
> specific_ss.add(when: 'CONFIG_SIFIVE_PLIC', if_true: files('sifive_plic.c'))
> specific_ss.add(when: 'CONFIG_XICS', if_true: files('xics.c'))
> -specific_ss.add(when: 'CONFIG_XICS_KVM', if_true: files('xics_kvm.c'))
> +specific_ss.add(when: ['CONFIG_KVM', 'CONFIG_XICS'],
> + if_true: files('xics_kvm.c'))
> specific_ss.add(when: 'CONFIG_XICS_SPAPR', if_true: files('xics_spapr.c'))
> specific_ss.add(when: 'CONFIG_XIVE', if_true: files('xive.c'))
> -specific_ss.add(when: 'CONFIG_XIVE_KVM', if_true: files('spapr_xive_kvm.c'))
> +specific_ss.add(when: ['CONFIG_KVM', 'CONFIG_XIVE'],
> + if_true: files('spapr_xive_kvm.c'))
> specific_ss.add(when: 'CONFIG_XIVE_SPAPR', if_true: files('spapr_xive.c'))
> diff --git a/hw/ppc/Kconfig b/hw/ppc/Kconfig
> index 982d55f5875c..064bd6edd83d 100644
> --- a/hw/ppc/Kconfig
> +++ b/hw/ppc/Kconfig
> @@ -129,21 +129,6 @@ config VIRTEX
> select XILINX_ETHLITE
> select FDT_PPC
>
> -config XIVE
> - bool
> - depends on POWERNV || PSERIES
> -
> -config XIVE_SPAPR
> - bool
> - default y
> - depends on PSERIES
> - select XIVE
> -
> -config XIVE_KVM
> - bool
> - default y
> - depends on XIVE_SPAPR && KVM
> -
> # Only used by 64-bit targets
> config FW_CFG_PPC
> bool
>
There is still a small inconsistency I think,
In hw/ppc/Kconfig :
config POWERNV
...
select XICS
select XIVE
config PSERIES
...
select XICS_SPAPR
select XIVE_SPAPR
and in hw/intc/meson.build :
specific_ss.add(when: 'CONFIG_POWERNV', if_true: files('xics_pnv.c', 'pnv_xive.c'))
...
specific_ss.add(when: 'CONFIG_XICS_SPAPR', if_true: files('xics_spapr.c'))
specific_ss.add(when: 'CONFIG_XIVE_SPAPR', if_true: files('spapr_xive.c'))
...
Couldn't we simply select XICS and XIVE in the PSERIES machine and
compile 'xics_spapr.c' and 'spapr_xive.c' when CONFIG_PSERIES is
defined ? This to be in sync with the POWERNV machine.
or introduce 'CONFIG_XICS_PNV 'CONFIG_XIVE_PNV' ?
Thanks,
C.
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v2 1/2] ppc: Fix build with --without-default-devices
2020-12-24 8:26 ` [PATCH v2 1/2] ppc: Fix build with --without-default-devices Cédric Le Goater
@ 2020-12-24 10:29 ` Paolo Bonzini
2020-12-24 10:34 ` Cédric Le Goater
0 siblings, 1 reply; 10+ messages in thread
From: Paolo Bonzini @ 2020-12-24 10:29 UTC (permalink / raw)
To: Cédric Le Goater, Greg Kurz, qemu-devel; +Cc: qemu-ppc, David Gibson
On 24/12/20 09:26, Cédric Le Goater wrote:
> In hw/ppc/Kconfig :
>
> config POWERNV
> ...
> select XICS
> select XIVE
>
> config PSERIES
> ...
> select XICS_SPAPR
> select XIVE_SPAPR
>
> and in hw/intc/meson.build :
>
> specific_ss.add(when: 'CONFIG_POWERNV', if_true: files('xics_pnv.c', 'pnv_xive.c'))
> ...
> specific_ss.add(when: 'CONFIG_XICS_SPAPR', if_true: files('xics_spapr.c'))
> specific_ss.add(when: 'CONFIG_XIVE_SPAPR', if_true: files('spapr_xive.c'))
> ...
>
>
> Couldn't we simply select XICS and XIVE in the PSERIES machine and
> compile 'xics_spapr.c' and 'spapr_xive.c' when CONFIG_PSERIES is
> defined ? This to be in sync with the POWERNV machine.
> or introduce 'CONFIG_XICS_PNV 'CONFIG_XIVE_PNV' ?
I think just using CONFIG_PSERIES is the simplest. But it's just a
cleanup, not a bugfix.
Paolo
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v2 1/2] ppc: Fix build with --without-default-devices
2020-12-24 10:29 ` Paolo Bonzini
@ 2020-12-24 10:34 ` Cédric Le Goater
0 siblings, 0 replies; 10+ messages in thread
From: Cédric Le Goater @ 2020-12-24 10:34 UTC (permalink / raw)
To: Paolo Bonzini, Greg Kurz, qemu-devel; +Cc: qemu-ppc, David Gibson
On 12/24/20 11:29 AM, Paolo Bonzini wrote:
> On 24/12/20 09:26, Cédric Le Goater wrote:
>> In hw/ppc/Kconfig :
>>
>> config POWERNV
>> ...
>> select XICS
>> select XIVE
>>
>> config PSERIES
>> ...
>> select XICS_SPAPR
>> select XIVE_SPAPR
>>
>> and in hw/intc/meson.build :
>>
>> specific_ss.add(when: 'CONFIG_POWERNV', if_true: files('xics_pnv.c', 'pnv_xive.c'))
>> ...
>> specific_ss.add(when: 'CONFIG_XICS_SPAPR', if_true: files('xics_spapr.c'))
>> specific_ss.add(when: 'CONFIG_XIVE_SPAPR', if_true: files('spapr_xive.c'))
>> ...
>>
>>
>> Couldn't we simply select XICS and XIVE in the PSERIES machine and
>> compile 'xics_spapr.c' and 'spapr_xive.c' when CONFIG_PSERIES is
>> defined ? This to be in sync with the POWERNV machine.
>> or introduce 'CONFIG_XICS_PNV 'CONFIG_XIVE_PNV' ?
>
> I think just using CONFIG_PSERIES is the simplest. But it's just a cleanup, not a bugfix.
yes. No big deal and it can come later.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Cheers,
C.
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v2 1/2] ppc: Fix build with --without-default-devices
2020-12-23 19:26 [PATCH v2 1/2] ppc: Fix build with --without-default-devices Greg Kurz
2020-12-23 19:26 ` [PATCH v2 2/2] pnv: Fix reverse dependency on PCI express root ports Greg Kurz
2020-12-24 8:26 ` [PATCH v2 1/2] ppc: Fix build with --without-default-devices Cédric Le Goater
@ 2020-12-24 10:58 ` Philippe Mathieu-Daudé
2020-12-24 14:42 ` Paolo Bonzini
2 siblings, 1 reply; 10+ messages in thread
From: Philippe Mathieu-Daudé @ 2020-12-24 10:58 UTC (permalink / raw)
To: Greg Kurz, qemu-devel
Cc: Paolo Bonzini, qemu-ppc, Cédric Le Goater, David Gibson
On 12/23/20 8:26 PM, Greg Kurz wrote:
> Linking of the qemu-system-ppc64 fails on a POWER9 host when
> --without-default-devices is passed to configure:
>
> $ ./configure --without-default-devices \
> --target-list=ppc64-softmmu && make
>
> ...
>
> libqemu-ppc64-softmmu.fa.p/hw_ppc_e500.c.o: In function `ppce500_init_mpic_kvm':
> /home/greg/Work/qemu/qemu-ppc/build/../hw/ppc/e500.c:777: undefined reference to `kvm_openpic_connect_vcpu'
> libqemu-ppc64-softmmu.fa.p/hw_ppc_spapr_irq.c.o: In function `spapr_irq_check':
> /home/greg/Work/qemu/qemu-ppc/build/../hw/ppc/spapr_irq.c:189: undefined reference to `xics_kvm_has_broken_disconnect'
> libqemu-ppc64-softmmu.fa.p/hw_intc_spapr_xive.c.o: In function `spapr_xive_post_load':
> /home/greg/Work/qemu/qemu-ppc/build/../hw/intc/spapr_xive.c:530: undefined reference to `kvmppc_xive_post_load'
>
> ... and tons of other symbols belonging to the KVM backend of the
> openpic, XICS and XIVE interrupt controllers.
>
> It turns out that OPENPIC_KVM, XICS_KVM and XIVE_KVM are marked
> to depend on KVM but this has no effect when minikconf runs in
> allnoconfig mode. Such reverse dependencies should rather be
> handled with a 'select' statement, eg.
>
> config OPENPIC
> select OPENPIC_KVM if KVM
>
> or even better by getting rid of the intermediate _KVM config
> and directly checking CONFIG_KVM in the meson.build file:
>
> specific_ss.add(when: ['CONFIG_KVM', 'CONFIG_OPENPIC'],
> if_true: files('openpic_kvm.c'))
>
> Go for the latter with OPENPIC, XICS and XIVE. While here also move
> XIVE_SPAPR to hw/intc/Kconfig where it belongs.
>
> This went unnoticed so far because CI doesn't test the build with
> --without-default-devices and KVM enabled on a POWER host.
>
> Signed-off-by: Greg Kurz <groug@kaod.org>
> ---
> v2: - check CONFIG_KVM in the meson.build as suggested by Paolo
> ---
> hw/intc/Kconfig | 14 +++++---------
> hw/intc/meson.build | 9 ++++++---
> hw/ppc/Kconfig | 15 ---------------
> 3 files changed, 11 insertions(+), 27 deletions(-)
>
> diff --git a/hw/intc/Kconfig b/hw/intc/Kconfig
> index 468d548ca771..ee60d4bf7857 100644
> --- a/hw/intc/Kconfig
> +++ b/hw/intc/Kconfig
> @@ -30,23 +30,19 @@ config ARM_GIC_KVM
> default y
> depends on ARM_GIC && KVM
>
> -config OPENPIC_KVM
> - bool
> - default y
> - depends on OPENPIC && KVM
> -
> config XICS
> bool
> - depends on POWERNV || PSERIES
>
> config XICS_SPAPR
> bool
> select XICS
>
> -config XICS_KVM
> +config XIVE
> bool
> - default y
> - depends on XICS && KVM
> +
> +config XIVE_SPAPR
> + bool
> + select XIVE
>
> config ALLWINNER_A10_PIC
> bool
> diff --git a/hw/intc/meson.build b/hw/intc/meson.build
> index 68da782ad2c5..b6c9218908e3 100644
> --- a/hw/intc/meson.build
> +++ b/hw/intc/meson.build
> @@ -39,7 +39,8 @@ specific_ss.add(when: 'CONFIG_LOONGSON_LIOINTC', if_true: files('loongson_lioint
> specific_ss.add(when: 'CONFIG_MIPS_CPS', if_true: files('mips_gic.c'))
> specific_ss.add(when: 'CONFIG_OMAP', if_true: files('omap_intc.c'))
> specific_ss.add(when: 'CONFIG_OMPIC', if_true: files('ompic.c'))
> -specific_ss.add(when: 'CONFIG_OPENPIC_KVM', if_true: files('openpic_kvm.c'))
> +specific_ss.add(when: ['CONFIG_KVM', 'CONFIG_OPENPIC'],
> + if_true: files('openpic_kvm.c'))
> specific_ss.add(when: 'CONFIG_POWERNV', if_true: files('xics_pnv.c', 'pnv_xive.c'))
> specific_ss.add(when: 'CONFIG_PPC_UIC', if_true: files('ppc-uic.c'))
> specific_ss.add(when: 'CONFIG_RASPI', if_true: files('bcm2835_ic.c', 'bcm2836_control.c'))
> @@ -50,8 +51,10 @@ specific_ss.add(when: 'CONFIG_SH4', if_true: files('sh_intc.c'))
> specific_ss.add(when: 'CONFIG_SIFIVE_CLINT', if_true: files('sifive_clint.c'))
> specific_ss.add(when: 'CONFIG_SIFIVE_PLIC', if_true: files('sifive_plic.c'))
> specific_ss.add(when: 'CONFIG_XICS', if_true: files('xics.c'))
> -specific_ss.add(when: 'CONFIG_XICS_KVM', if_true: files('xics_kvm.c'))
> +specific_ss.add(when: ['CONFIG_KVM', 'CONFIG_XICS'],
> + if_true: files('xics_kvm.c'))
> specific_ss.add(when: 'CONFIG_XICS_SPAPR', if_true: files('xics_spapr.c'))
> specific_ss.add(when: 'CONFIG_XIVE', if_true: files('xive.c'))
> -specific_ss.add(when: 'CONFIG_XIVE_KVM', if_true: files('spapr_xive_kvm.c'))
> +specific_ss.add(when: ['CONFIG_KVM', 'CONFIG_XIVE'],
> + if_true: files('spapr_xive_kvm.c'))
> specific_ss.add(when: 'CONFIG_XIVE_SPAPR', if_true: files('spapr_xive.c'))
> diff --git a/hw/ppc/Kconfig b/hw/ppc/Kconfig
> index 982d55f5875c..064bd6edd83d 100644
> --- a/hw/ppc/Kconfig
> +++ b/hw/ppc/Kconfig
> @@ -129,21 +129,6 @@ config VIRTEX
> select XILINX_ETHLITE
> select FDT_PPC
>
> -config XIVE
> - bool
> - depends on POWERNV || PSERIES
> -
> -config XIVE_SPAPR
> - bool
> - default y
> - depends on PSERIES
> - select XIVE
> -
> -config XIVE_KVM
> - bool
> - default y
> - depends on XIVE_SPAPR && KVM
> -
Is it possible to split this patch in 2: XICS, XIVE (or 3: same + OPENPIC)?
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v2 1/2] ppc: Fix build with --without-default-devices
2020-12-24 10:58 ` Philippe Mathieu-Daudé
@ 2020-12-24 14:42 ` Paolo Bonzini
2020-12-24 15:37 ` Philippe Mathieu-Daudé
0 siblings, 1 reply; 10+ messages in thread
From: Paolo Bonzini @ 2020-12-24 14:42 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Cédric Le Goater, David Gibson, qemu-ppc, Greg Kurz, qemu-devel
[-- Attachment #1: Type: text/plain, Size: 5630 bytes --]
Why? It's all KVM.
Paolo
Il gio 24 dic 2020, 11:58 Philippe Mathieu-Daudé <f4bug@amsat.org> ha
scritto:
> On 12/23/20 8:26 PM, Greg Kurz wrote:
> > Linking of the qemu-system-ppc64 fails on a POWER9 host when
> > --without-default-devices is passed to configure:
> >
> > $ ./configure --without-default-devices \
> > --target-list=ppc64-softmmu && make
> >
> > ...
> >
> > libqemu-ppc64-softmmu.fa.p/hw_ppc_e500.c.o: In function
> `ppce500_init_mpic_kvm':
> > /home/greg/Work/qemu/qemu-ppc/build/../hw/ppc/e500.c:777: undefined
> reference to `kvm_openpic_connect_vcpu'
> > libqemu-ppc64-softmmu.fa.p/hw_ppc_spapr_irq.c.o: In function
> `spapr_irq_check':
> > /home/greg/Work/qemu/qemu-ppc/build/../hw/ppc/spapr_irq.c:189: undefined
> reference to `xics_kvm_has_broken_disconnect'
> > libqemu-ppc64-softmmu.fa.p/hw_intc_spapr_xive.c.o: In function
> `spapr_xive_post_load':
> > /home/greg/Work/qemu/qemu-ppc/build/../hw/intc/spapr_xive.c:530:
> undefined reference to `kvmppc_xive_post_load'
> >
> > ... and tons of other symbols belonging to the KVM backend of the
> > openpic, XICS and XIVE interrupt controllers.
> >
> > It turns out that OPENPIC_KVM, XICS_KVM and XIVE_KVM are marked
> > to depend on KVM but this has no effect when minikconf runs in
> > allnoconfig mode. Such reverse dependencies should rather be
> > handled with a 'select' statement, eg.
> >
> > config OPENPIC
> > select OPENPIC_KVM if KVM
> >
> > or even better by getting rid of the intermediate _KVM config
> > and directly checking CONFIG_KVM in the meson.build file:
> >
> > specific_ss.add(when: ['CONFIG_KVM', 'CONFIG_OPENPIC'],
> > if_true: files('openpic_kvm.c'))
> >
> > Go for the latter with OPENPIC, XICS and XIVE. While here also move
> > XIVE_SPAPR to hw/intc/Kconfig where it belongs.
> >
> > This went unnoticed so far because CI doesn't test the build with
> > --without-default-devices and KVM enabled on a POWER host.
> >
> > Signed-off-by: Greg Kurz <groug@kaod.org>
> > ---
> > v2: - check CONFIG_KVM in the meson.build as suggested by Paolo
> > ---
> > hw/intc/Kconfig | 14 +++++---------
> > hw/intc/meson.build | 9 ++++++---
> > hw/ppc/Kconfig | 15 ---------------
> > 3 files changed, 11 insertions(+), 27 deletions(-)
> >
> > diff --git a/hw/intc/Kconfig b/hw/intc/Kconfig
> > index 468d548ca771..ee60d4bf7857 100644
> > --- a/hw/intc/Kconfig
> > +++ b/hw/intc/Kconfig
> > @@ -30,23 +30,19 @@ config ARM_GIC_KVM
> > default y
> > depends on ARM_GIC && KVM
> >
> > -config OPENPIC_KVM
> > - bool
> > - default y
> > - depends on OPENPIC && KVM
> > -
> > config XICS
> > bool
> > - depends on POWERNV || PSERIES
> >
> > config XICS_SPAPR
> > bool
> > select XICS
> >
> > -config XICS_KVM
> > +config XIVE
> > bool
> > - default y
> > - depends on XICS && KVM
> > +
> > +config XIVE_SPAPR
> > + bool
> > + select XIVE
> >
> > config ALLWINNER_A10_PIC
> > bool
> > diff --git a/hw/intc/meson.build b/hw/intc/meson.build
> > index 68da782ad2c5..b6c9218908e3 100644
> > --- a/hw/intc/meson.build
> > +++ b/hw/intc/meson.build
> > @@ -39,7 +39,8 @@ specific_ss.add(when: 'CONFIG_LOONGSON_LIOINTC',
> if_true: files('loongson_lioint
> > specific_ss.add(when: 'CONFIG_MIPS_CPS', if_true: files('mips_gic.c'))
> > specific_ss.add(when: 'CONFIG_OMAP', if_true: files('omap_intc.c'))
> > specific_ss.add(when: 'CONFIG_OMPIC', if_true: files('ompic.c'))
> > -specific_ss.add(when: 'CONFIG_OPENPIC_KVM', if_true:
> files('openpic_kvm.c'))
> > +specific_ss.add(when: ['CONFIG_KVM', 'CONFIG_OPENPIC'],
> > + if_true: files('openpic_kvm.c'))
> > specific_ss.add(when: 'CONFIG_POWERNV', if_true: files('xics_pnv.c',
> 'pnv_xive.c'))
> > specific_ss.add(when: 'CONFIG_PPC_UIC', if_true: files('ppc-uic.c'))
> > specific_ss.add(when: 'CONFIG_RASPI', if_true: files('bcm2835_ic.c',
> 'bcm2836_control.c'))
> > @@ -50,8 +51,10 @@ specific_ss.add(when: 'CONFIG_SH4', if_true:
> files('sh_intc.c'))
> > specific_ss.add(when: 'CONFIG_SIFIVE_CLINT', if_true:
> files('sifive_clint.c'))
> > specific_ss.add(when: 'CONFIG_SIFIVE_PLIC', if_true:
> files('sifive_plic.c'))
> > specific_ss.add(when: 'CONFIG_XICS', if_true: files('xics.c'))
> > -specific_ss.add(when: 'CONFIG_XICS_KVM', if_true: files('xics_kvm.c'))
> > +specific_ss.add(when: ['CONFIG_KVM', 'CONFIG_XICS'],
> > + if_true: files('xics_kvm.c'))
> > specific_ss.add(when: 'CONFIG_XICS_SPAPR', if_true:
> files('xics_spapr.c'))
> > specific_ss.add(when: 'CONFIG_XIVE', if_true: files('xive.c'))
> > -specific_ss.add(when: 'CONFIG_XIVE_KVM', if_true:
> files('spapr_xive_kvm.c'))
> > +specific_ss.add(when: ['CONFIG_KVM', 'CONFIG_XIVE'],
> > + if_true: files('spapr_xive_kvm.c'))
> > specific_ss.add(when: 'CONFIG_XIVE_SPAPR', if_true:
> files('spapr_xive.c'))
> > diff --git a/hw/ppc/Kconfig b/hw/ppc/Kconfig
> > index 982d55f5875c..064bd6edd83d 100644
> > --- a/hw/ppc/Kconfig
> > +++ b/hw/ppc/Kconfig
> > @@ -129,21 +129,6 @@ config VIRTEX
> > select XILINX_ETHLITE
> > select FDT_PPC
> >
> > -config XIVE
> > - bool
> > - depends on POWERNV || PSERIES
> > -
> > -config XIVE_SPAPR
> > - bool
> > - default y
> > - depends on PSERIES
> > - select XIVE
> > -
> > -config XIVE_KVM
> > - bool
> > - default y
> > - depends on XIVE_SPAPR && KVM
> > -
>
> Is it possible to split this patch in 2: XICS, XIVE (or 3: same + OPENPIC)?
>
>
[-- Attachment #2: Type: text/html, Size: 7229 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v2 1/2] ppc: Fix build with --without-default-devices
2020-12-24 14:42 ` Paolo Bonzini
@ 2020-12-24 15:37 ` Philippe Mathieu-Daudé
0 siblings, 0 replies; 10+ messages in thread
From: Philippe Mathieu-Daudé @ 2020-12-24 15:37 UTC (permalink / raw)
To: Paolo Bonzini
Cc: qemu-devel, Greg Kurz, qemu-ppc, Cédric Le Goater, David Gibson
On 12/24/20 3:42 PM, Paolo Bonzini wrote:
> Why? It's all KVM.
I find it not obvious to figure out by simply looking at this diff.
I'm probably too tired. Anyway Cédric already reviewed it.
>
> Paolo
>
> Il gio 24 dic 2020, 11:58 Philippe Mathieu-Daudé <f4bug@amsat.org
> <mailto:f4bug@amsat.org>> ha scritto:
>
> On 12/23/20 8:26 PM, Greg Kurz wrote:
> > Linking of the qemu-system-ppc64 fails on a POWER9 host when
> > --without-default-devices is passed to configure:
> >
> > $ ./configure --without-default-devices \
> > --target-list=ppc64-softmmu && make
> >
> > ...
> >
> > libqemu-ppc64-softmmu.fa.p/hw_ppc_e500.c.o: In function
> `ppce500_init_mpic_kvm':
> > /home/greg/Work/qemu/qemu-ppc/build/../hw/ppc/e500.c:777:
> undefined reference to `kvm_openpic_connect_vcpu'
> > libqemu-ppc64-softmmu.fa.p/hw_ppc_spapr_irq.c.o: In function
> `spapr_irq_check':
> > /home/greg/Work/qemu/qemu-ppc/build/../hw/ppc/spapr_irq.c:189:
> undefined reference to `xics_kvm_has_broken_disconnect'
> > libqemu-ppc64-softmmu.fa.p/hw_intc_spapr_xive.c.o: In function
> `spapr_xive_post_load':
> > /home/greg/Work/qemu/qemu-ppc/build/../hw/intc/spapr_xive.c:530:
> undefined reference to `kvmppc_xive_post_load'
> >
> > ... and tons of other symbols belonging to the KVM backend of the
> > openpic, XICS and XIVE interrupt controllers.
> >
> > It turns out that OPENPIC_KVM, XICS_KVM and XIVE_KVM are marked
> > to depend on KVM but this has no effect when minikconf runs in
> > allnoconfig mode. Such reverse dependencies should rather be
> > handled with a 'select' statement, eg.
> >
> > config OPENPIC
> > select OPENPIC_KVM if KVM
> >
> > or even better by getting rid of the intermediate _KVM config
> > and directly checking CONFIG_KVM in the meson.build file:
> >
> > specific_ss.add(when: ['CONFIG_KVM', 'CONFIG_OPENPIC'],
> > if_true: files('openpic_kvm.c'))
> >
> > Go for the latter with OPENPIC, XICS and XIVE. While here also move
> > XIVE_SPAPR to hw/intc/Kconfig where it belongs.
> >
> > This went unnoticed so far because CI doesn't test the build with
> > --without-default-devices and KVM enabled on a POWER host.
> >
> > Signed-off-by: Greg Kurz <groug@kaod.org <mailto:groug@kaod.org>>
> > ---
> > v2: - check CONFIG_KVM in the meson.build as suggested by Paolo
> > ---
> > hw/intc/Kconfig | 14 +++++---------
> > hw/intc/meson.build | 9 ++++++---
> > hw/ppc/Kconfig | 15 ---------------
> > 3 files changed, 11 insertions(+), 27 deletions(-)
^ permalink raw reply [flat|nested] 10+ messages in thread