All of lore.kernel.org
 help / color / mirror / Atom feed
From: Xu Yilun <yilun.xu@intel.com>
To: mdf@kernel.org, linux-fpga@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: gregkh@linuxfoundation.org, trix@redhat.com, lgoncalv@redhat.com,
	yilun.xu@intel.com, hao.wu@intel.com
Subject: [PATCH v5 1/2] fpga: dfl: add the userspace I/O device support for DFL devices
Date: Sat,  2 Jan 2021 11:13:01 +0800	[thread overview]
Message-ID: <1609557182-20787-2-git-send-email-yilun.xu@intel.com> (raw)
In-Reply-To: <1609557182-20787-1-git-send-email-yilun.xu@intel.com>

This patch supports the DFL drivers be written in userspace. This is
realized by exposing the userspace I/O device interfaces.

The driver leverages the uio_pdrv_genirq, it adds the uio_pdrv_genirq
platform device with the DFL device's resources, and let the generic UIO
platform device driver provide support to userspace access to kernel
interrupts and memory locations.

The driver now supports the ether group feature. To support a new DFL
feature been directly accessed via UIO, its feature id should be added to
the driver's id_table.

Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
---
v2: switch to the new matching algorithem. It matches DFL devices which
     could not be handled by other DFL drivers.
    refacor the code about device resources filling.
    fix some comments.
v3: split the dfl.c changes out of this patch.
    some minor fixes
v4: drop the idea of a generic matching algorithem, instead we specify
     each matching device in id_table.
    to make clear that only one irq is supported, the irq handling code
     is refactored.
v5: refactor the irq resource code.
---
 drivers/fpga/Kconfig        | 10 +++++
 drivers/fpga/Makefile       |  1 +
 drivers/fpga/dfl-uio-pdev.c | 91 +++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 102 insertions(+)
 create mode 100644 drivers/fpga/dfl-uio-pdev.c

diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
index 5ff9438..61445be 100644
--- a/drivers/fpga/Kconfig
+++ b/drivers/fpga/Kconfig
@@ -203,6 +203,16 @@ config FPGA_DFL_NIOS_INTEL_PAC_N3000
 	  the card. It also instantiates the SPI master (spi-altera) for
 	  the card's BMC (Board Management Controller).
 
+config FPGA_DFL_UIO_PDEV
+	tristate "FPGA DFL Driver for Userspace I/O platform devices"
+	depends on FPGA_DFL && UIO_PDRV_GENIRQ
+	help
+	  Enable this to allow some DFL drivers be written in userspace. It
+	  adds the uio_pdrv_genirq platform device with the DFL feature's
+	  resources, and lets the generic UIO platform device driver provide
+	  support for userspace access to kernel interrupts and memory
+	  locations.
+
 config FPGA_DFL_PCI
 	tristate "FPGA DFL PCIe Device Driver"
 	depends on PCI && FPGA_DFL
diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
index 18dc9885..8847fe0 100644
--- a/drivers/fpga/Makefile
+++ b/drivers/fpga/Makefile
@@ -45,6 +45,7 @@ dfl-afu-objs := dfl-afu-main.o dfl-afu-region.o dfl-afu-dma-region.o
 dfl-afu-objs += dfl-afu-error.o
 
 obj-$(CONFIG_FPGA_DFL_NIOS_INTEL_PAC_N3000)	+= dfl-n3000-nios.o
+obj-$(CONFIG_FPGA_DFL_UIO_PDEV)		+= dfl-uio-pdev.o
 
 # Drivers for FPGAs which implement DFL
 obj-$(CONFIG_FPGA_DFL_PCI)		+= dfl-pci.o
diff --git a/drivers/fpga/dfl-uio-pdev.c b/drivers/fpga/dfl-uio-pdev.c
new file mode 100644
index 0000000..a4cd581
--- /dev/null
+++ b/drivers/fpga/dfl-uio-pdev.c
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * DFL driver for Userspace I/O platform devices
+ *
+ * Copyright (C) 2020 Intel Corporation, Inc.
+ */
+#include <linux/dfl.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/uio_driver.h>
+
+#define DRIVER_NAME "dfl-uio-pdev"
+
+static int dfl_uio_pdev_probe(struct dfl_device *ddev)
+{
+	struct platform_device_info pdevinfo = { 0 };
+	struct uio_info uio_pdata = { 0 };
+	struct platform_device *uio_pdev;
+	struct device *dev = &ddev->dev;
+	unsigned int num_res = 1;
+	struct resource res[2];
+
+	res[0].parent = &ddev->mmio_res;
+	res[0].flags = IORESOURCE_MEM;
+	res[0].start = ddev->mmio_res.start;
+	res[0].end = ddev->mmio_res.end;
+
+	if (ddev->num_irqs) {
+		if (ddev->num_irqs > 1)
+			dev_warn(&ddev->dev,
+				 "%d irqs for %s, but UIO only supports the first one\n",
+				 ddev->num_irqs, dev_name(&ddev->dev));
+
+		res[1].flags = IORESOURCE_IRQ;
+		res[1].start = ddev->irqs[0];
+		res[1].end = ddev->irqs[0];
+		num_res++;
+	}
+
+	uio_pdata.name = DRIVER_NAME;
+	uio_pdata.version = "0";
+
+	pdevinfo.name = "uio_pdrv_genirq";
+	pdevinfo.res = res;
+	pdevinfo.num_res = num_res;
+	pdevinfo.parent = &ddev->dev;
+	pdevinfo.id = PLATFORM_DEVID_AUTO;
+	pdevinfo.data = &uio_pdata;
+	pdevinfo.size_data = sizeof(uio_pdata);
+
+	uio_pdev = platform_device_register_full(&pdevinfo);
+	if (!IS_ERR(uio_pdev))
+		dev_set_drvdata(dev, uio_pdev);
+
+	return PTR_ERR_OR_ZERO(uio_pdev);
+}
+
+static void dfl_uio_pdev_remove(struct dfl_device *ddev)
+{
+	struct platform_device *uio_pdev = dev_get_drvdata(&ddev->dev);
+
+	platform_device_unregister(uio_pdev);
+}
+
+#define FME_FEATURE_ID_ETH_GROUP	0x10
+
+static const struct dfl_device_id dfl_uio_pdev_ids[] = {
+	{ FME_ID, FME_FEATURE_ID_ETH_GROUP },
+
+	/* Add your new id entries here to support uio for more dfl features */
+
+	{ }
+};
+MODULE_DEVICE_TABLE(dfl, dfl_uio_pdev_ids);
+
+static struct dfl_driver dfl_uio_pdev_driver = {
+	.drv	= {
+		.name       = DRIVER_NAME,
+	},
+	.id_table = dfl_uio_pdev_ids,
+	.probe	= dfl_uio_pdev_probe,
+	.remove	= dfl_uio_pdev_remove,
+};
+module_dfl_driver(dfl_uio_pdev_driver);
+
+MODULE_DESCRIPTION("DFL driver for Userspace I/O platform devices");
+MODULE_AUTHOR("Intel Corporation");
+MODULE_LICENSE("GPL v2");
-- 
2.7.4


  reply	other threads:[~2021-01-02  3:19 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-02  3:13 [PATCH v5 0/2] UIO support for dfl devices Xu Yilun
2021-01-02  3:13 ` Xu Yilun [this message]
2021-01-04  4:16   ` [PATCH v5 1/2] fpga: dfl: add the userspace I/O device support for DFL devices Wu, Hao
2021-01-04  6:49     ` Xu Yilun
2021-01-10 20:11   ` Moritz Fischer
2021-01-11  6:16     ` Xu Yilun
2021-01-11 14:59       ` Tom Rix
2021-01-12  0:16         ` Xu Yilun
2021-01-13  1:02           ` Moritz Fischer
2021-01-02  3:13 ` [PATCH v5 2/2] Documentation: fpga: dfl: Add description for DFL UIO support Xu Yilun
2021-01-04  4:24   ` Wu, Hao
2021-01-04  6:50     ` Xu Yilun
2021-01-04 17:19   ` Russ Weight
2021-01-05  2:00     ` Xu Yilun
2021-01-10 19:58 ` [PATCH v5 0/2] UIO support for dfl devices Moritz Fischer
2021-01-11  6:27   ` Xu Yilun

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1609557182-20787-2-git-send-email-yilun.xu@intel.com \
    --to=yilun.xu@intel.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=hao.wu@intel.com \
    --cc=lgoncalv@redhat.com \
    --cc=linux-fpga@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mdf@kernel.org \
    --cc=trix@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.