[PATCH net 0/3] net: hns3: fixes for -net

[PATCH net 0/3] net: hns3: fixes for -net

[Huazhong Tan]

There are some bugfixes for the HNS3 ethernet driver.

Jian Shen (1):
  net: hns3: fix incorrect handling of sctp6 rss tuple

Yonglong Liu (1):
  net: hns3: fix a phy loopback fail issue

Yufeng Mo (1):
  net: hns3: fix the number of queues actually used by ARQ

 drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h           | 4 ++--
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c   | 9 ++++++---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h   | 2 ++
 drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 9 ++++++---
 drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h | 2 ++
 5 files changed, 18 insertions(+), 8 deletions(-)

-- 
2.7.4

[PATCH net 1/3] net: hns3: fix a phy loopback fail issue

[Huazhong Tan]

From: Yonglong Liu <liuyonglong@huawei.com>

When phy driver does not implement the set_loopback interface,
phy loopback test will return -EOPNOTSUPP, and the loopback test
will fail. So when phy driver does not implement the set_loopback
interface, don't do phy loopback test.

Fixes: c9765a89d142 ("net: hns3: add phy selftest function")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index e6f37f9..135bd0a 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -752,7 +752,8 @@ static int hclge_get_sset_count(struct hnae3_handle *handle, int stringset)
 		handle->flags |= HNAE3_SUPPORT_SERDES_SERIAL_LOOPBACK;
 		handle->flags |= HNAE3_SUPPORT_SERDES_PARALLEL_LOOPBACK;
 
-		if (hdev->hw.mac.phydev) {
+		if (hdev->hw.mac.phydev && hdev->hw.mac.phydev->drv &&
+		    hdev->hw.mac.phydev->drv->set_loopback) {
 			count += 1;
 			handle->flags |= HNAE3_SUPPORT_PHY_LOOPBACK;
 		}
-- 
2.7.4

[PATCH net 2/3] net: hns3: fix the number of queues actually used by ARQ

[Huazhong Tan]

From: Yufeng Mo <moyufeng@huawei.com>

HCLGE_MBX_MAX_ARQ_MSG_NUM is used to apply memory for the number
of queues used by ARQ(Asynchronous Receive Queue), so the head
and tail pointers should also use this macro.

Fixes: 07a0556a3a73 ("net: hns3: Changes to support ARQ(Asynchronous Receive Queue)")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
---
 drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h b/drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h
index fb5e884..33defa4 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h
@@ -169,7 +169,7 @@ struct hclgevf_mbx_arq_ring {
 #define hclge_mbx_ring_ptr_move_crq(crq) \
 	(crq->next_to_use = (crq->next_to_use + 1) % crq->desc_num)
 #define hclge_mbx_tail_ptr_move_arq(arq) \
-	(arq.tail = (arq.tail + 1) % HCLGE_MBX_MAX_ARQ_MSG_SIZE)
+		(arq.tail = (arq.tail + 1) % HCLGE_MBX_MAX_ARQ_MSG_NUM)
 #define hclge_mbx_head_ptr_move_arq(arq) \
-		(arq.head = (arq.head + 1) % HCLGE_MBX_MAX_ARQ_MSG_SIZE)
+		(arq.head = (arq.head + 1) % HCLGE_MBX_MAX_ARQ_MSG_NUM)
 #endif
-- 
2.7.4

[PATCH net 3/3] net: hns3: fix incorrect handling of sctp6 rss tuple

[Huazhong Tan]

From: Jian Shen <shenjian15@huawei.com>

For DEVICE_VERSION_V2, the hardware only supports src-ip,
dst-ip and verification-tag for rss tuple set of sctp6
packet. For DEVICE_VERSION_V3, the hardware supports
src-port and dst-port as well.

Currently, when user queries the sctp6 rss tuples info,
some unsupported information will be showed on V2. So add
a check for hardware version when initializing and queries
sctp6 rss tuple to fix this issue.

Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c   | 6 ++++--
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h   | 2 ++
 drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 9 ++++++---
 drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h | 2 ++
 4 files changed, 14 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 135bd0a..c242883 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -4538,8 +4538,8 @@ static int hclge_set_rss_tuple(struct hnae3_handle *handle,
 		req->ipv4_sctp_en = tuple_sets;
 		break;
 	case SCTP_V6_FLOW:
-		if ((nfc->data & RXH_L4_B_0_1) ||
-		    (nfc->data & RXH_L4_B_2_3))
+		if (hdev->ae_dev->dev_version <= HNAE3_DEVICE_VERSION_V2 &&
+		    (nfc->data & (RXH_L4_B_0_1 | RXH_L4_B_2_3)))
 			return -EINVAL;
 
 		req->ipv6_sctp_en = tuple_sets;
@@ -4731,6 +4731,8 @@ static void hclge_rss_init_cfg(struct hclge_dev *hdev)
 		vport[i].rss_tuple_sets.ipv6_udp_en =
 			HCLGE_RSS_INPUT_TUPLE_OTHER;
 		vport[i].rss_tuple_sets.ipv6_sctp_en =
+			hdev->ae_dev->dev_version <= HNAE3_DEVICE_VERSION_V2 ?
+			HCLGE_RSS_INPUT_TUPLE_SCTP_NO_PORT :
 			HCLGE_RSS_INPUT_TUPLE_SCTP;
 		vport[i].rss_tuple_sets.ipv6_fragment_en =
 			HCLGE_RSS_INPUT_TUPLE_OTHER;
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
index 50a294d..ca46bc9 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
@@ -107,6 +107,8 @@
 #define HCLGE_D_IP_BIT			BIT(2)
 #define HCLGE_S_IP_BIT			BIT(3)
 #define HCLGE_V_TAG_BIT			BIT(4)
+#define HCLGE_RSS_INPUT_TUPLE_SCTP_NO_PORT	\
+		(HCLGE_D_IP_BIT | HCLGE_S_IP_BIT | HCLGE_V_TAG_BIT)
 
 #define HCLGE_RSS_TC_SIZE_0		1
 #define HCLGE_RSS_TC_SIZE_1		2
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
index 145757c..674b3a2 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
@@ -917,8 +917,8 @@ static int hclgevf_set_rss_tuple(struct hnae3_handle *handle,
 		req->ipv4_sctp_en = tuple_sets;
 		break;
 	case SCTP_V6_FLOW:
-		if ((nfc->data & RXH_L4_B_0_1) ||
-		    (nfc->data & RXH_L4_B_2_3))
+		if (hdev->ae_dev->dev_version <= HNAE3_DEVICE_VERSION_V2 &&
+		    (nfc->data & (RXH_L4_B_0_1 | RXH_L4_B_2_3)))
 			return -EINVAL;
 
 		req->ipv6_sctp_en = tuple_sets;
@@ -2502,7 +2502,10 @@ static void hclgevf_rss_init_cfg(struct hclgevf_dev *hdev)
 		tuple_sets->ipv4_fragment_en = HCLGEVF_RSS_INPUT_TUPLE_OTHER;
 		tuple_sets->ipv6_tcp_en = HCLGEVF_RSS_INPUT_TUPLE_OTHER;
 		tuple_sets->ipv6_udp_en = HCLGEVF_RSS_INPUT_TUPLE_OTHER;
-		tuple_sets->ipv6_sctp_en = HCLGEVF_RSS_INPUT_TUPLE_SCTP;
+		tuple_sets->ipv6_sctp_en =
+			hdev->ae_dev->dev_version <= HNAE3_DEVICE_VERSION_V2 ?
+					HCLGEVF_RSS_INPUT_TUPLE_SCTP_NO_PORT :
+					HCLGEVF_RSS_INPUT_TUPLE_SCTP;
 		tuple_sets->ipv6_fragment_en = HCLGEVF_RSS_INPUT_TUPLE_OTHER;
 	}
 
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h
index 1b183bc..f6d817a 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h
@@ -122,6 +122,8 @@
 #define HCLGEVF_D_IP_BIT		BIT(2)
 #define HCLGEVF_S_IP_BIT		BIT(3)
 #define HCLGEVF_V_TAG_BIT		BIT(4)
+#define HCLGEVF_RSS_INPUT_TUPLE_SCTP_NO_PORT	\
+	(HCLGEVF_D_IP_BIT | HCLGEVF_S_IP_BIT | HCLGEVF_V_TAG_BIT)
 
 #define HCLGEVF_STATS_TIMER_INTERVAL	36U
 
-- 
2.7.4

Re: [PATCH net 0/3] net: hns3: fixes for -net

[David Miller]

From: Huazhong Tan <tanhuazhong@huawei.com>
Date: Tue, 5 Jan 2021 11:37:25 +0800

> There are some bugfixes for the HNS3 ethernet driver.

Series applies and queued up for -stable, thanks