* [Bug 1912780] Re: QEMU: Null Pointer Failure in fdctrl_read() in hw/block/fdc.c
[not found] <161131902674.28690.10783050287084462937.malonedeb@soybean.canonical.com>
@ 2021-01-23 11:24 ` P J P
2021-05-14 19:24 ` Thomas Huth
` (2 subsequent siblings)
3 siblings, 0 replies; 4+ messages in thread
From: P J P @ 2021-01-23 11:24 UTC (permalink / raw)
To: qemu-devel
Upstream patch:
-> https://lists.nongnu.org/archive/html/qemu-devel/2021-01/msg05986.html
** Information type changed from Private Security to Public Security
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1912780
Title:
QEMU: Null Pointer Failure in fdctrl_read() in hw/block/fdc.c
Status in QEMU:
New
Bug description:
[via qemu-security list]
This is Gaoning Pan from Zhejiang University & Ant Security Light-Year Lab.
I found a Null Pointer issue locates in fdctrl_read() in hw/block/fdc.c.
This flaw allows a malicious guest user or process in a denial of service condition.
This issus was discovered in the latest Qemu-5.2.0. When using floppy device, there are several
choices to get specific drive in get_drv(), depending on fdctrl->cur_drv. But not all drives are
initialized properly, leaving fdctrl->drives[0]->blk as NULL. So when the drive was used in
blk_pread(cur_drv->blk, fd_offset(cur_drv), fdctrl->fifo, BDRV_SECTOR_SIZE) at line 1918,
null pointer access triggers, thus denial of service.My reproduced environment is as follows:
Host: ubuntu 18.04
Guest: ubuntu 18.04
My boot command is as follows:
qemu-system-x86_64 -enable-kvm -boot c -m 2G -drive format=qcow2,file=./ubuntu.img \
-nic user,hostfwd=tcp:0.0.0.0:5555-:22 -device floppy,unit=1,drive=mydrive \
-drive id=mydrive,file=null-co://,size=2M,format=raw,if=none -display none
ASAN output is as follows:
=================================================================
==14688==ERROR: AddressSanitizer: SEGV on unknown address 0x00000000034c (pc 0x5636eee9bbaf bp 0x7ff2a53fdea0 sp 0x7ff2a53fde90 T3)
==14688==The signal is caused by a WRITE memory access.
==14688==Hint: address points to the zero page.
#0 0x5636eee9bbae in blk_inc_in_flight ../block/block-backend.c:1356
#1 0x5636eee9b766 in blk_prw ../block/block-backend.c:1328
#2 0x5636eee9cd76 in blk_pread ../block/block-backend.c:1491
#3 0x5636ee1adf24 in fdctrl_read_data ../hw/block/fdc.c:1918
#4 0x5636ee1a6654 in fdctrl_read ../hw/block/fdc.c:935
#5 0x5636eebb84c8 in portio_read ../softmmu/ioport.c:179
#6 0x5636ee9848c5 in memory_region_read_accessor ../softmmu/memory.c:442
#7 0x5636ee9855c2 in access_with_adjusted_size ../softmmu/memory.c:552
#8 0x5636ee98f0b7 in memory_region_dispatch_read1 ../softmmu/memory.c:1420
#9 0x5636ee98f311 in memory_region_dispatch_read ../softmmu/memory.c:1449
#10 0x5636ee8ff64a in flatview_read_continue ../softmmu/physmem.c:2822
#11 0x5636ee8ff9e5 in flatview_read ../softmmu/physmem.c:2862
#12 0x5636ee8ffb83 in address_space_read_full ../softmmu/physmem.c:2875
#13 0x5636ee8ffdeb in address_space_rw ../softmmu/physmem.c:2903
#14 0x5636eea6a924 in kvm_handle_io ../accel/kvm/kvm-all.c:2285
#15 0x5636eea6c5e3 in kvm_cpu_exec ../accel/kvm/kvm-all.c:2531
#16 0x5636eeca492b in kvm_vcpu_thread_fn ../accel/kvm/kvm-cpus.c:49
#17 0x5636ef1bc296 in qemu_thread_start ../util/qemu-thread-posix.c:521
#18 0x7ff337c736da in start_thread (/lib/x86_64-linux-gnu/libpthread.so.0+0x76da)
#19 0x7ff33799ca3e in __clone (/lib/x86_64-linux-gnu/libc.so.6+0x121a3e)
AddressSanitizer can not provide additional info.
SUMMARY: AddressSanitizer: SEGV ../block/block-backend.c:1356 in blk_inc_in_flight
Thread T3 created by T0 here:
#0 0x7ff33c580d2f in __interceptor_pthread_create (/usr/lib/x86_64-linux-gnu/libasan.so.4+0x37d2f)
#1 0x5636ef1bc673 in qemu_thread_create ../util/qemu-thread-posix.c:558
#2 0x5636eeca4ce7 in kvm_start_vcpu_thread ../accel/kvm/kvm-cpus.c:73
#3 0x5636ee9aa965 in qemu_init_vcpu ../softmmu/cpus.c:622
#4 0x5636ee82a9b4 in x86_cpu_realizefn ../target/i386/cpu.c:6731
#5 0x5636eed002f4 in device_set_realized ../hw/core/qdev.c:886
#6 0x5636eecc59bc in property_set_bool ../qom/object.c:2251
#7 0x5636eecc0c28 in object_property_set ../qom/object.c:1398
#8 0x5636eecb6fb9 in object_property_set_qobject ../qom/qom-qobject.c:28
#9 0x5636eecc1175 in object_property_set_bool ../qom/object.c:1465
#10 0x5636eecfc286 in qdev_realize ../hw/core/qdev.c:399
#11 0x5636ee739b34 in x86_cpu_new ../hw/i386/x86.c:111
#12 0x5636ee739d6d in x86_cpus_init ../hw/i386/x86.c:138
#13 0x5636ee6f843e in pc_init1 ../hw/i386/pc_piix.c:159
#14 0x5636ee6fab1e in pc_init_v5_2 ../hw/i386/pc_piix.c:438
#15 0x5636ee1cb4a7 in machine_run_board_init ../hw/core/machine.c:1134
#16 0x5636ee9c323d in qemu_init ../softmmu/vl.c:4369
#17 0x5636edd92c71 in main ../softmmu/main.c:49
#18 0x7ff33789cb96 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x21b96)
==14688==ABORTING
Reproducer is attached.
Best regards.
Gaoning Pan of Zhejiang University & Ant Security Light-Year Lab
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1912780/+subscriptions
^ permalink raw reply [flat|nested] 4+ messages in thread* [Bug 1912780] Re: QEMU: Null Pointer Failure in fdctrl_read() in hw/block/fdc.c
[not found] <161131902674.28690.10783050287084462937.malonedeb@soybean.canonical.com>
2021-01-23 11:24 ` [Bug 1912780] Re: QEMU: Null Pointer Failure in fdctrl_read() in hw/block/fdc.c P J P
@ 2021-05-14 19:24 ` Thomas Huth
2021-05-17 22:42 ` John Snow
2021-05-18 4:41 ` Thomas Huth
3 siblings, 0 replies; 4+ messages in thread
From: Thomas Huth @ 2021-05-14 19:24 UTC (permalink / raw)
To: qemu-devel
** Changed in: qemu
Status: New => In Progress
** Changed in: qemu
Importance: Undecided => High
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1912780
Title:
QEMU: Null Pointer Failure in fdctrl_read() in hw/block/fdc.c
Status in QEMU:
In Progress
Bug description:
[via qemu-security list]
This is Gaoning Pan from Zhejiang University & Ant Security Light-Year Lab.
I found a Null Pointer issue locates in fdctrl_read() in hw/block/fdc.c.
This flaw allows a malicious guest user or process in a denial of service condition.
This issus was discovered in the latest Qemu-5.2.0. When using floppy device, there are several
choices to get specific drive in get_drv(), depending on fdctrl->cur_drv. But not all drives are
initialized properly, leaving fdctrl->drives[0]->blk as NULL. So when the drive was used in
blk_pread(cur_drv->blk, fd_offset(cur_drv), fdctrl->fifo, BDRV_SECTOR_SIZE) at line 1918,
null pointer access triggers, thus denial of service.My reproduced environment is as follows:
Host: ubuntu 18.04
Guest: ubuntu 18.04
My boot command is as follows:
qemu-system-x86_64 -enable-kvm -boot c -m 2G -drive format=qcow2,file=./ubuntu.img \
-nic user,hostfwd=tcp:0.0.0.0:5555-:22 -device floppy,unit=1,drive=mydrive \
-drive id=mydrive,file=null-co://,size=2M,format=raw,if=none -display none
ASAN output is as follows:
=================================================================
==14688==ERROR: AddressSanitizer: SEGV on unknown address 0x00000000034c (pc 0x5636eee9bbaf bp 0x7ff2a53fdea0 sp 0x7ff2a53fde90 T3)
==14688==The signal is caused by a WRITE memory access.
==14688==Hint: address points to the zero page.
#0 0x5636eee9bbae in blk_inc_in_flight ../block/block-backend.c:1356
#1 0x5636eee9b766 in blk_prw ../block/block-backend.c:1328
#2 0x5636eee9cd76 in blk_pread ../block/block-backend.c:1491
#3 0x5636ee1adf24 in fdctrl_read_data ../hw/block/fdc.c:1918
#4 0x5636ee1a6654 in fdctrl_read ../hw/block/fdc.c:935
#5 0x5636eebb84c8 in portio_read ../softmmu/ioport.c:179
#6 0x5636ee9848c5 in memory_region_read_accessor ../softmmu/memory.c:442
#7 0x5636ee9855c2 in access_with_adjusted_size ../softmmu/memory.c:552
#8 0x5636ee98f0b7 in memory_region_dispatch_read1 ../softmmu/memory.c:1420
#9 0x5636ee98f311 in memory_region_dispatch_read ../softmmu/memory.c:1449
#10 0x5636ee8ff64a in flatview_read_continue ../softmmu/physmem.c:2822
#11 0x5636ee8ff9e5 in flatview_read ../softmmu/physmem.c:2862
#12 0x5636ee8ffb83 in address_space_read_full ../softmmu/physmem.c:2875
#13 0x5636ee8ffdeb in address_space_rw ../softmmu/physmem.c:2903
#14 0x5636eea6a924 in kvm_handle_io ../accel/kvm/kvm-all.c:2285
#15 0x5636eea6c5e3 in kvm_cpu_exec ../accel/kvm/kvm-all.c:2531
#16 0x5636eeca492b in kvm_vcpu_thread_fn ../accel/kvm/kvm-cpus.c:49
#17 0x5636ef1bc296 in qemu_thread_start ../util/qemu-thread-posix.c:521
#18 0x7ff337c736da in start_thread (/lib/x86_64-linux-gnu/libpthread.so.0+0x76da)
#19 0x7ff33799ca3e in __clone (/lib/x86_64-linux-gnu/libc.so.6+0x121a3e)
AddressSanitizer can not provide additional info.
SUMMARY: AddressSanitizer: SEGV ../block/block-backend.c:1356 in blk_inc_in_flight
Thread T3 created by T0 here:
#0 0x7ff33c580d2f in __interceptor_pthread_create (/usr/lib/x86_64-linux-gnu/libasan.so.4+0x37d2f)
#1 0x5636ef1bc673 in qemu_thread_create ../util/qemu-thread-posix.c:558
#2 0x5636eeca4ce7 in kvm_start_vcpu_thread ../accel/kvm/kvm-cpus.c:73
#3 0x5636ee9aa965 in qemu_init_vcpu ../softmmu/cpus.c:622
#4 0x5636ee82a9b4 in x86_cpu_realizefn ../target/i386/cpu.c:6731
#5 0x5636eed002f4 in device_set_realized ../hw/core/qdev.c:886
#6 0x5636eecc59bc in property_set_bool ../qom/object.c:2251
#7 0x5636eecc0c28 in object_property_set ../qom/object.c:1398
#8 0x5636eecb6fb9 in object_property_set_qobject ../qom/qom-qobject.c:28
#9 0x5636eecc1175 in object_property_set_bool ../qom/object.c:1465
#10 0x5636eecfc286 in qdev_realize ../hw/core/qdev.c:399
#11 0x5636ee739b34 in x86_cpu_new ../hw/i386/x86.c:111
#12 0x5636ee739d6d in x86_cpus_init ../hw/i386/x86.c:138
#13 0x5636ee6f843e in pc_init1 ../hw/i386/pc_piix.c:159
#14 0x5636ee6fab1e in pc_init_v5_2 ../hw/i386/pc_piix.c:438
#15 0x5636ee1cb4a7 in machine_run_board_init ../hw/core/machine.c:1134
#16 0x5636ee9c323d in qemu_init ../softmmu/vl.c:4369
#17 0x5636edd92c71 in main ../softmmu/main.c:49
#18 0x7ff33789cb96 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x21b96)
==14688==ABORTING
Reproducer is attached.
Best regards.
Gaoning Pan of Zhejiang University & Ant Security Light-Year Lab
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1912780/+subscriptions
^ permalink raw reply [flat|nested] 4+ messages in thread* [Bug 1912780] Re: QEMU: Null Pointer Failure in fdctrl_read() in hw/block/fdc.c
[not found] <161131902674.28690.10783050287084462937.malonedeb@soybean.canonical.com>
2021-01-23 11:24 ` [Bug 1912780] Re: QEMU: Null Pointer Failure in fdctrl_read() in hw/block/fdc.c P J P
2021-05-14 19:24 ` Thomas Huth
@ 2021-05-17 22:42 ` John Snow
2021-05-18 4:41 ` Thomas Huth
3 siblings, 0 replies; 4+ messages in thread
From: John Snow @ 2021-05-17 22:42 UTC (permalink / raw)
To: qemu-devel
Took a look at the patch today, I think it might need a change or two
but it should be quick to do. I've asked Thomas to move this issue to
gitlab so I can keep a closer eye on it.
--js
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1912780
Title:
QEMU: Null Pointer Failure in fdctrl_read() in hw/block/fdc.c
Status in QEMU:
In Progress
Bug description:
[via qemu-security list]
This is Gaoning Pan from Zhejiang University & Ant Security Light-Year Lab.
I found a Null Pointer issue locates in fdctrl_read() in hw/block/fdc.c.
This flaw allows a malicious guest user or process in a denial of service condition.
This issus was discovered in the latest Qemu-5.2.0. When using floppy device, there are several
choices to get specific drive in get_drv(), depending on fdctrl->cur_drv. But not all drives are
initialized properly, leaving fdctrl->drives[0]->blk as NULL. So when the drive was used in
blk_pread(cur_drv->blk, fd_offset(cur_drv), fdctrl->fifo, BDRV_SECTOR_SIZE) at line 1918,
null pointer access triggers, thus denial of service.My reproduced environment is as follows:
Host: ubuntu 18.04
Guest: ubuntu 18.04
My boot command is as follows:
qemu-system-x86_64 -enable-kvm -boot c -m 2G -drive format=qcow2,file=./ubuntu.img \
-nic user,hostfwd=tcp:0.0.0.0:5555-:22 -device floppy,unit=1,drive=mydrive \
-drive id=mydrive,file=null-co://,size=2M,format=raw,if=none -display none
ASAN output is as follows:
=================================================================
==14688==ERROR: AddressSanitizer: SEGV on unknown address 0x00000000034c (pc 0x5636eee9bbaf bp 0x7ff2a53fdea0 sp 0x7ff2a53fde90 T3)
==14688==The signal is caused by a WRITE memory access.
==14688==Hint: address points to the zero page.
#0 0x5636eee9bbae in blk_inc_in_flight ../block/block-backend.c:1356
#1 0x5636eee9b766 in blk_prw ../block/block-backend.c:1328
#2 0x5636eee9cd76 in blk_pread ../block/block-backend.c:1491
#3 0x5636ee1adf24 in fdctrl_read_data ../hw/block/fdc.c:1918
#4 0x5636ee1a6654 in fdctrl_read ../hw/block/fdc.c:935
#5 0x5636eebb84c8 in portio_read ../softmmu/ioport.c:179
#6 0x5636ee9848c5 in memory_region_read_accessor ../softmmu/memory.c:442
#7 0x5636ee9855c2 in access_with_adjusted_size ../softmmu/memory.c:552
#8 0x5636ee98f0b7 in memory_region_dispatch_read1 ../softmmu/memory.c:1420
#9 0x5636ee98f311 in memory_region_dispatch_read ../softmmu/memory.c:1449
#10 0x5636ee8ff64a in flatview_read_continue ../softmmu/physmem.c:2822
#11 0x5636ee8ff9e5 in flatview_read ../softmmu/physmem.c:2862
#12 0x5636ee8ffb83 in address_space_read_full ../softmmu/physmem.c:2875
#13 0x5636ee8ffdeb in address_space_rw ../softmmu/physmem.c:2903
#14 0x5636eea6a924 in kvm_handle_io ../accel/kvm/kvm-all.c:2285
#15 0x5636eea6c5e3 in kvm_cpu_exec ../accel/kvm/kvm-all.c:2531
#16 0x5636eeca492b in kvm_vcpu_thread_fn ../accel/kvm/kvm-cpus.c:49
#17 0x5636ef1bc296 in qemu_thread_start ../util/qemu-thread-posix.c:521
#18 0x7ff337c736da in start_thread (/lib/x86_64-linux-gnu/libpthread.so.0+0x76da)
#19 0x7ff33799ca3e in __clone (/lib/x86_64-linux-gnu/libc.so.6+0x121a3e)
AddressSanitizer can not provide additional info.
SUMMARY: AddressSanitizer: SEGV ../block/block-backend.c:1356 in blk_inc_in_flight
Thread T3 created by T0 here:
#0 0x7ff33c580d2f in __interceptor_pthread_create (/usr/lib/x86_64-linux-gnu/libasan.so.4+0x37d2f)
#1 0x5636ef1bc673 in qemu_thread_create ../util/qemu-thread-posix.c:558
#2 0x5636eeca4ce7 in kvm_start_vcpu_thread ../accel/kvm/kvm-cpus.c:73
#3 0x5636ee9aa965 in qemu_init_vcpu ../softmmu/cpus.c:622
#4 0x5636ee82a9b4 in x86_cpu_realizefn ../target/i386/cpu.c:6731
#5 0x5636eed002f4 in device_set_realized ../hw/core/qdev.c:886
#6 0x5636eecc59bc in property_set_bool ../qom/object.c:2251
#7 0x5636eecc0c28 in object_property_set ../qom/object.c:1398
#8 0x5636eecb6fb9 in object_property_set_qobject ../qom/qom-qobject.c:28
#9 0x5636eecc1175 in object_property_set_bool ../qom/object.c:1465
#10 0x5636eecfc286 in qdev_realize ../hw/core/qdev.c:399
#11 0x5636ee739b34 in x86_cpu_new ../hw/i386/x86.c:111
#12 0x5636ee739d6d in x86_cpus_init ../hw/i386/x86.c:138
#13 0x5636ee6f843e in pc_init1 ../hw/i386/pc_piix.c:159
#14 0x5636ee6fab1e in pc_init_v5_2 ../hw/i386/pc_piix.c:438
#15 0x5636ee1cb4a7 in machine_run_board_init ../hw/core/machine.c:1134
#16 0x5636ee9c323d in qemu_init ../softmmu/vl.c:4369
#17 0x5636edd92c71 in main ../softmmu/main.c:49
#18 0x7ff33789cb96 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x21b96)
==14688==ABORTING
Reproducer is attached.
Best regards.
Gaoning Pan of Zhejiang University & Ant Security Light-Year Lab
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1912780/+subscriptions
^ permalink raw reply [flat|nested] 4+ messages in thread* [Bug 1912780] Re: QEMU: Null Pointer Failure in fdctrl_read() in hw/block/fdc.c
[not found] <161131902674.28690.10783050287084462937.malonedeb@soybean.canonical.com>
` (2 preceding siblings ...)
2021-05-17 22:42 ` John Snow
@ 2021-05-18 4:41 ` Thomas Huth
3 siblings, 0 replies; 4+ messages in thread
From: Thomas Huth @ 2021-05-18 4:41 UTC (permalink / raw)
To: qemu-devel
This is an automated cleanup. This bug report has been moved to QEMU's
new bug tracker on gitlab.com and thus gets marked as 'expired' now.
Please continue with the discussion here:
https://gitlab.com/qemu-project/qemu/-/issues/338
** Changed in: qemu
Status: In Progress => Expired
** Bug watch added: gitlab.com/qemu-project/qemu/-/issues #338
https://gitlab.com/qemu-project/qemu/-/issues/338
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1912780
Title:
QEMU: Null Pointer Failure in fdctrl_read() in hw/block/fdc.c
Status in QEMU:
Expired
Bug description:
[via qemu-security list]
This is Gaoning Pan from Zhejiang University & Ant Security Light-Year Lab.
I found a Null Pointer issue locates in fdctrl_read() in hw/block/fdc.c.
This flaw allows a malicious guest user or process in a denial of service condition.
This issus was discovered in the latest Qemu-5.2.0. When using floppy device, there are several
choices to get specific drive in get_drv(), depending on fdctrl->cur_drv. But not all drives are
initialized properly, leaving fdctrl->drives[0]->blk as NULL. So when the drive was used in
blk_pread(cur_drv->blk, fd_offset(cur_drv), fdctrl->fifo, BDRV_SECTOR_SIZE) at line 1918,
null pointer access triggers, thus denial of service.My reproduced environment is as follows:
Host: ubuntu 18.04
Guest: ubuntu 18.04
My boot command is as follows:
qemu-system-x86_64 -enable-kvm -boot c -m 2G -drive format=qcow2,file=./ubuntu.img \
-nic user,hostfwd=tcp:0.0.0.0:5555-:22 -device floppy,unit=1,drive=mydrive \
-drive id=mydrive,file=null-co://,size=2M,format=raw,if=none -display none
ASAN output is as follows:
=================================================================
==14688==ERROR: AddressSanitizer: SEGV on unknown address 0x00000000034c (pc 0x5636eee9bbaf bp 0x7ff2a53fdea0 sp 0x7ff2a53fde90 T3)
==14688==The signal is caused by a WRITE memory access.
==14688==Hint: address points to the zero page.
#0 0x5636eee9bbae in blk_inc_in_flight ../block/block-backend.c:1356
#1 0x5636eee9b766 in blk_prw ../block/block-backend.c:1328
#2 0x5636eee9cd76 in blk_pread ../block/block-backend.c:1491
#3 0x5636ee1adf24 in fdctrl_read_data ../hw/block/fdc.c:1918
#4 0x5636ee1a6654 in fdctrl_read ../hw/block/fdc.c:935
#5 0x5636eebb84c8 in portio_read ../softmmu/ioport.c:179
#6 0x5636ee9848c5 in memory_region_read_accessor ../softmmu/memory.c:442
#7 0x5636ee9855c2 in access_with_adjusted_size ../softmmu/memory.c:552
#8 0x5636ee98f0b7 in memory_region_dispatch_read1 ../softmmu/memory.c:1420
#9 0x5636ee98f311 in memory_region_dispatch_read ../softmmu/memory.c:1449
#10 0x5636ee8ff64a in flatview_read_continue ../softmmu/physmem.c:2822
#11 0x5636ee8ff9e5 in flatview_read ../softmmu/physmem.c:2862
#12 0x5636ee8ffb83 in address_space_read_full ../softmmu/physmem.c:2875
#13 0x5636ee8ffdeb in address_space_rw ../softmmu/physmem.c:2903
#14 0x5636eea6a924 in kvm_handle_io ../accel/kvm/kvm-all.c:2285
#15 0x5636eea6c5e3 in kvm_cpu_exec ../accel/kvm/kvm-all.c:2531
#16 0x5636eeca492b in kvm_vcpu_thread_fn ../accel/kvm/kvm-cpus.c:49
#17 0x5636ef1bc296 in qemu_thread_start ../util/qemu-thread-posix.c:521
#18 0x7ff337c736da in start_thread (/lib/x86_64-linux-gnu/libpthread.so.0+0x76da)
#19 0x7ff33799ca3e in __clone (/lib/x86_64-linux-gnu/libc.so.6+0x121a3e)
AddressSanitizer can not provide additional info.
SUMMARY: AddressSanitizer: SEGV ../block/block-backend.c:1356 in blk_inc_in_flight
Thread T3 created by T0 here:
#0 0x7ff33c580d2f in __interceptor_pthread_create (/usr/lib/x86_64-linux-gnu/libasan.so.4+0x37d2f)
#1 0x5636ef1bc673 in qemu_thread_create ../util/qemu-thread-posix.c:558
#2 0x5636eeca4ce7 in kvm_start_vcpu_thread ../accel/kvm/kvm-cpus.c:73
#3 0x5636ee9aa965 in qemu_init_vcpu ../softmmu/cpus.c:622
#4 0x5636ee82a9b4 in x86_cpu_realizefn ../target/i386/cpu.c:6731
#5 0x5636eed002f4 in device_set_realized ../hw/core/qdev.c:886
#6 0x5636eecc59bc in property_set_bool ../qom/object.c:2251
#7 0x5636eecc0c28 in object_property_set ../qom/object.c:1398
#8 0x5636eecb6fb9 in object_property_set_qobject ../qom/qom-qobject.c:28
#9 0x5636eecc1175 in object_property_set_bool ../qom/object.c:1465
#10 0x5636eecfc286 in qdev_realize ../hw/core/qdev.c:399
#11 0x5636ee739b34 in x86_cpu_new ../hw/i386/x86.c:111
#12 0x5636ee739d6d in x86_cpus_init ../hw/i386/x86.c:138
#13 0x5636ee6f843e in pc_init1 ../hw/i386/pc_piix.c:159
#14 0x5636ee6fab1e in pc_init_v5_2 ../hw/i386/pc_piix.c:438
#15 0x5636ee1cb4a7 in machine_run_board_init ../hw/core/machine.c:1134
#16 0x5636ee9c323d in qemu_init ../softmmu/vl.c:4369
#17 0x5636edd92c71 in main ../softmmu/main.c:49
#18 0x7ff33789cb96 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x21b96)
==14688==ABORTING
Reproducer is attached.
Best regards.
Gaoning Pan of Zhejiang University & Ant Security Light-Year Lab
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1912780/+subscriptions
^ permalink raw reply [flat|nested] 4+ messages in thread