[PATCH net-next v2 0/3] dpaa2: add 1000base-X support

[PATCH net-next v2 0/3] dpaa2: add 1000base-X support

[Russell King - ARM Linux admin]

Hi,

This patch series adds 1000base-X support to pcs-lynx and DPAA2,
allowing runtime switching between SGMII and 1000base-X. This is
a pre-requisit for SFP module support on the SolidRun ComExpress 7.

v2: updated with Ioana's r-b's, and comment on backplane support

 drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h |  4 ++-
 drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c | 25 ++++++++++++----
 drivers/net/pcs/pcs-lynx.c                       | 36 ++++++++++++++++++++++++
 3 files changed, 59 insertions(+), 6 deletions(-)

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!

[PATCH net-next v2 1/3] net: pcs: add pcs-lynx 1000BASE-X support

[Russell King]

Add support for 1000BASE-X to pcs-lynx for the LX2160A.

This commit prepares the ground work for allowing 1G fiber connections
to be used with DPAA2 on the SolidRun CEX7 platforms.

Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
 drivers/net/pcs/pcs-lynx.c | 36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/drivers/net/pcs/pcs-lynx.c b/drivers/net/pcs/pcs-lynx.c
index 62bb9272dcb2..af36cd647bf5 100644
--- a/drivers/net/pcs/pcs-lynx.c
+++ b/drivers/net/pcs/pcs-lynx.c
@@ -11,6 +11,7 @@
 #define LINK_TIMER_VAL(ns)		((u32)((ns) / SGMII_CLOCK_PERIOD_NS))
 
 #define SGMII_AN_LINK_TIMER_NS		1600000 /* defined by SGMII spec */
+#define IEEE8023_LINK_TIMER_NS		10000000
 
 #define LINK_TIMER_LO			0x12
 #define LINK_TIMER_HI			0x13
@@ -83,6 +84,7 @@ static void lynx_pcs_get_state(struct phylink_pcs *pcs,
 	struct lynx_pcs *lynx = phylink_pcs_to_lynx(pcs);
 
 	switch (state->interface) {
+	case PHY_INTERFACE_MODE_1000BASEX:
 	case PHY_INTERFACE_MODE_SGMII:
 	case PHY_INTERFACE_MODE_QSGMII:
 		phylink_mii_c22_pcs_get_state(lynx->mdio, state);
@@ -108,6 +110,30 @@ static void lynx_pcs_get_state(struct phylink_pcs *pcs,
 		state->link, state->an_enabled, state->an_complete);
 }
 
+static int lynx_pcs_config_1000basex(struct mdio_device *pcs,
+				     unsigned int mode,
+				     const unsigned long *advertising)
+{
+	struct mii_bus *bus = pcs->bus;
+	int addr = pcs->addr;
+	u32 link_timer;
+	int err;
+
+	link_timer = LINK_TIMER_VAL(IEEE8023_LINK_TIMER_NS);
+	mdiobus_write(bus, addr, LINK_TIMER_LO, link_timer & 0xffff);
+	mdiobus_write(bus, addr, LINK_TIMER_HI, link_timer >> 16);
+
+	err = mdiobus_modify(bus, addr, IF_MODE,
+			     IF_MODE_SGMII_EN | IF_MODE_USE_SGMII_AN,
+			     0);
+	if (err)
+		return err;
+
+	return phylink_mii_c22_pcs_config(pcs, mode,
+					  PHY_INTERFACE_MODE_1000BASEX,
+					  advertising);
+}
+
 static int lynx_pcs_config_sgmii(struct mdio_device *pcs, unsigned int mode,
 				 const unsigned long *advertising)
 {
@@ -163,6 +189,8 @@ static int lynx_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
 	struct lynx_pcs *lynx = phylink_pcs_to_lynx(pcs);
 
 	switch (ifmode) {
+	case PHY_INTERFACE_MODE_1000BASEX:
+		return lynx_pcs_config_1000basex(lynx->mdio, mode, advertising);
 	case PHY_INTERFACE_MODE_SGMII:
 	case PHY_INTERFACE_MODE_QSGMII:
 		return lynx_pcs_config_sgmii(lynx->mdio, mode, advertising);
@@ -185,6 +213,13 @@ static int lynx_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
 	return 0;
 }
 
+static void lynx_pcs_an_restart(struct phylink_pcs *pcs)
+{
+	struct lynx_pcs *lynx = phylink_pcs_to_lynx(pcs);
+
+	phylink_mii_c22_pcs_an_restart(lynx->mdio);
+}
+
 static void lynx_pcs_link_up_sgmii(struct mdio_device *pcs, unsigned int mode,
 				   int speed, int duplex)
 {
@@ -290,6 +325,7 @@ static void lynx_pcs_link_up(struct phylink_pcs *pcs, unsigned int mode,
 static const struct phylink_pcs_ops lynx_pcs_phylink_ops = {
 	.pcs_get_state = lynx_pcs_get_state,
 	.pcs_config = lynx_pcs_config,
+	.pcs_an_restart = lynx_pcs_an_restart,
 	.pcs_link_up = lynx_pcs_link_up,
 };
 
-- 
2.20.1

[PATCH net-next v2 2/3] net: dpaa2-mac: add 1000BASE-X support

[Russell King]

Now that pcs-lynx supports 1000BASE-X, add support for this interface
mode to dpaa2-mac. pcs-lynx can be switched at runtime between SGMII
and 1000BASE-X mode, so allow dpaa2-mac to switch between these as
well.

This commit prepares the ground work for allowing 1G fiber connections
to be used with DPAA2 on the SolidRun CEX7 platforms.

Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
 .../net/ethernet/freescale/dpaa2/dpaa2-mac.c  | 20 ++++++++++++++++---
 1 file changed, 17 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
index 69ad869446cf..3ddfb40eb5e4 100644
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
@@ -79,10 +79,20 @@ static bool dpaa2_mac_phy_mode_mismatch(struct dpaa2_mac *mac,
 					phy_interface_t interface)
 {
 	switch (interface) {
+	/* We can switch between SGMII and 1000BASE-X at runtime with
+	 * pcs-lynx
+	 */
+	case PHY_INTERFACE_MODE_SGMII:
+	case PHY_INTERFACE_MODE_1000BASEX:
+		if (mac->pcs &&
+		    (mac->if_mode == PHY_INTERFACE_MODE_SGMII ||
+		     mac->if_mode == PHY_INTERFACE_MODE_1000BASEX))
+			return false;
+		return interface != mac->if_mode;
+
 	case PHY_INTERFACE_MODE_10GBASER:
 	case PHY_INTERFACE_MODE_USXGMII:
 	case PHY_INTERFACE_MODE_QSGMII:
-	case PHY_INTERFACE_MODE_SGMII:
 	case PHY_INTERFACE_MODE_RGMII:
 	case PHY_INTERFACE_MODE_RGMII_ID:
 	case PHY_INTERFACE_MODE_RGMII_RXID:
@@ -122,13 +132,17 @@ static void dpaa2_mac_validate(struct phylink_config *config,
 		fallthrough;
 	case PHY_INTERFACE_MODE_SGMII:
 	case PHY_INTERFACE_MODE_QSGMII:
+	case PHY_INTERFACE_MODE_1000BASEX:
 	case PHY_INTERFACE_MODE_RGMII:
 	case PHY_INTERFACE_MODE_RGMII_ID:
 	case PHY_INTERFACE_MODE_RGMII_RXID:
 	case PHY_INTERFACE_MODE_RGMII_TXID:
-		phylink_set(mask, 10baseT_Full);
-		phylink_set(mask, 100baseT_Full);
+		phylink_set(mask, 1000baseX_Full);
 		phylink_set(mask, 1000baseT_Full);
+		if (state->interface == PHY_INTERFACE_MODE_1000BASEX)
+			break;
+		phylink_set(mask, 100baseT_Full);
+		phylink_set(mask, 10baseT_Full);
 		break;
 	default:
 		goto empty_set;
-- 
2.20.1

[PATCH net-next v2 3/3] net: dpaa2-mac: add backplane link mode support

[Russell King]

Add support for backplane link mode, which is, according to discussions
with NXP earlier in the year, is a mode where the OS (Linux) is able to
manage the PCS and Serdes itself.

This commit prepares the ground work for allowing 1G fiber connections
to be used with DPAA2 on the SolidRun CEX7 platforms.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
 drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h | 4 +++-
 drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c | 5 +++--
 2 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
index c3d456c45102..9b6a89709ce1 100644
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
@@ -695,7 +695,9 @@ static inline unsigned int dpaa2_eth_rx_head_room(struct dpaa2_eth_priv *priv)
 
 static inline bool dpaa2_eth_is_type_phy(struct dpaa2_eth_priv *priv)
 {
-	if (priv->mac && priv->mac->attr.link_type == DPMAC_LINK_TYPE_PHY)
+	if (priv->mac &&
+	    (priv->mac->attr.link_type == DPMAC_LINK_TYPE_PHY ||
+	     priv->mac->attr.link_type == DPMAC_LINK_TYPE_BACKPLANE))
 		return true;
 
 	return false;
diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
index 3ddfb40eb5e4..ccaf7e35abeb 100644
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
@@ -315,8 +315,9 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
 		goto err_put_node;
 	}
 
-	if (mac->attr.link_type == DPMAC_LINK_TYPE_PHY &&
-	    mac->attr.eth_if != DPMAC_ETH_IF_RGMII) {
+	if ((mac->attr.link_type == DPMAC_LINK_TYPE_PHY &&
+	     mac->attr.eth_if != DPMAC_ETH_IF_RGMII) ||
+	    mac->attr.link_type == DPMAC_LINK_TYPE_BACKPLANE) {
 		err = dpaa2_pcs_create(mac, dpmac_node, mac->attr.id);
 		if (err)
 			goto err_put_node;
-- 
2.20.1

Re: [PATCH net-next v2 0/3] dpaa2: add 1000base-X support

[patchwork-bot+netdevbpf]

Hello:

This series was applied to netdev/net-next.git (refs/heads/master):

On Fri, 5 Feb 2021 10:39:00 +0000 you wrote:
> Hi,
> 
> This patch series adds 1000base-X support to pcs-lynx and DPAA2,
> allowing runtime switching between SGMII and 1000base-X. This is
> a pre-requisit for SFP module support on the SolidRun ComExpress 7.
> 
> v2: updated with Ioana's r-b's, and comment on backplane support
> 
> [...]

Here is the summary with links:
  - [net-next,v2,1/3] net: pcs: add pcs-lynx 1000BASE-X support
    https://git.kernel.org/netdev/net-next/c/694a0006c0b1
  - [net-next,v2,2/3] net: dpaa2-mac: add 1000BASE-X support
    https://git.kernel.org/netdev/net-next/c/46c518c8145b
  - [net-next,v2,3/3] net: dpaa2-mac: add backplane link mode support
    https://git.kernel.org/netdev/net-next/c/085f1776fa03

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html