[Intel-gfx] [PATCH 1/3] drm/i915: Disallow plane x+w>stride on ilk+ with X-tiling

[Intel-gfx] [PATCH 1/3] drm/i915: Disallow plane x+w>stride on ilk+ with X-tiling

[Ville Syrjala]

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

ilk+ planes get notably unhappy when the plane x+w exceeds
the stride. This wasn't a problem previously because we
always aligned SURF to the closest tile boundary so the
x offset never got particularly large. But now with async
flips we have to align to 256KiB instead and thus this
becomes a real issue.

On ilk/snb/ivb it looks like the accesses just just wrap
early to the next tile row when scanout goes past the
SURF+n*stride boundary, hsw/bdw suffer more heavily and
start to underrun constantly. i965/g4x appear to be immune.
vlv/chv I've not yet checked.

Let's borrow another trick from the skl+ code and search
backwards for a better SURF offset in the hopes of getting the
x offset below the limit. IIRC when I ran into a similar issue
on skl years ago it was causing the hardware to fall over
pretty hard as well.

And let's be consistent and include i965/g4x in the check
as well, just in case I just got super lucky somehow when
I wasn't able to reproduce the issue. Not that it really
matters since we still use 4k SURF alignment for i965/g4x
anyway.

Fixes: 6ede6b0616b2 ("drm/i915: Implement async flips for vlv/chv")
Fixes: 4bb18054adc4 ("drm/i915: Implement async flip for ilk/snb")
Fixes: 2a636e240c77 ("drm/i915: Implement async flip for ivb/hsw")
Fixes: cda195f13abd ("drm/i915: Implement async flips for bdw")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
 drivers/gpu/drm/i915/display/i9xx_plane.c | 27 +++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/drivers/gpu/drm/i915/display/i9xx_plane.c b/drivers/gpu/drm/i915/display/i9xx_plane.c
index 0523e2c79d16..8a52beaed2da 100644
--- a/drivers/gpu/drm/i915/display/i9xx_plane.c
+++ b/drivers/gpu/drm/i915/display/i9xx_plane.c
@@ -255,6 +255,33 @@ int i9xx_check_plane_surface(struct intel_plane_state *plane_state)
 	else
 		offset = 0;
 
+	/*
+	 * When using an X-tiled surface the plane starts to
+	 * misbehave if the x offset + width exceeds the stride.
+	 * hsw/bdw: underrun galore
+	 * ilk/snb/ivb: wrap to the next tile row mid scanout
+	 * i965/g4x: so far appear immune to this
+	 * vlv/chv: TODO check
+	 *
+	 * Linear surfaces seem to work just fine, even on hsw/bdw
+	 * despite them not using the linear offset anymore.
+	 */
+	if (INTEL_GEN(dev_priv) >= 4 && fb->modifier == I915_FORMAT_MOD_X_TILED) {
+		u32 alignment = intel_surf_alignment(fb, 0);
+		int cpp = fb->format->cpp[0];
+
+		while ((src_x + src_w) * cpp > plane_state->color_plane[0].stride) {
+			if (offset == 0) {
+				drm_dbg_kms(&dev_priv->drm,
+					    "Unable to find suitable display surface offset due to X-tiling\n");
+				return -EINVAL;
+			}
+
+			offset = intel_plane_adjust_aligned_offset(&src_x, &src_y, plane_state, 0,
+								   offset, offset - alignment);
+		}
+	}
+
 	/*
 	 * Put the final coordinates back so that the src
 	 * coordinate checks will see the right values.
-- 
2.26.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH 2/3] drm/i915: Fix overlay frontbuffer tracking

[Ville Syrjala]

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

We don't have a persistent fb holding a reference to the frontbuffer
object, so every time we do the get+put we throw the frontbuffer object
immediately away. And so the next time around we get a pristine
frontbuffer object with bits==0 even for the old vma. This confuses
the frontbuffer tracking code which understandably expects the old
frontbuffer to have the overlay's bit set.

Fix this by hanging on to the frontbuffer reference until the next
flip. And just to make this a bit more clear let's track the frontbuffer
explicitly instead of just grabbing it via the old vma.

Cc: stable@vger.kernel.org
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1136
Fixes: da42104f589d ("drm/i915: Hold reference to intel_frontbuffer as we track activity")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
 drivers/gpu/drm/i915/display/intel_overlay.c | 17 ++++++++---------
 1 file changed, 8 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_overlay.c b/drivers/gpu/drm/i915/display/intel_overlay.c
index 9c0113f15b58..ef8f44f5e751 100644
--- a/drivers/gpu/drm/i915/display/intel_overlay.c
+++ b/drivers/gpu/drm/i915/display/intel_overlay.c
@@ -183,6 +183,7 @@ struct intel_overlay {
 	struct intel_crtc *crtc;
 	struct i915_vma *vma;
 	struct i915_vma *old_vma;
+	struct intel_frontbuffer *frontbuffer;
 	bool active;
 	bool pfit_active;
 	u32 pfit_vscale_ratio; /* shifted-point number, (1<<12) == 1.0 */
@@ -283,21 +284,19 @@ static void intel_overlay_flip_prepare(struct intel_overlay *overlay,
 				       struct i915_vma *vma)
 {
 	enum pipe pipe = overlay->crtc->pipe;
-	struct intel_frontbuffer *from = NULL, *to = NULL;
+	struct intel_frontbuffer *frontbuffer = NULL;
 
 	drm_WARN_ON(&overlay->i915->drm, overlay->old_vma);
 
-	if (overlay->vma)
-		from = intel_frontbuffer_get(overlay->vma->obj);
 	if (vma)
-		to = intel_frontbuffer_get(vma->obj);
+		frontbuffer = intel_frontbuffer_get(vma->obj);
 
-	intel_frontbuffer_track(from, to, INTEL_FRONTBUFFER_OVERLAY(pipe));
+	intel_frontbuffer_track(overlay->frontbuffer, frontbuffer,
+				INTEL_FRONTBUFFER_OVERLAY(pipe));
 
-	if (to)
-		intel_frontbuffer_put(to);
-	if (from)
-		intel_frontbuffer_put(from);
+	if (overlay->frontbuffer)
+		intel_frontbuffer_put(overlay->frontbuffer);
+	overlay->frontbuffer = frontbuffer;
 
 	intel_frontbuffer_flip_prepare(overlay->i915,
 				       INTEL_FRONTBUFFER_OVERLAY(pipe));
-- 
2.26.2

[Intel-gfx] [PATCH 2/3] drm/i915: Fix overlay frontbuffer tracking

[Ville Syrjala]

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

We don't have a persistent fb holding a reference to the frontbuffer
object, so every time we do the get+put we throw the frontbuffer object
immediately away. And so the next time around we get a pristine
frontbuffer object with bits==0 even for the old vma. This confuses
the frontbuffer tracking code which understandably expects the old
frontbuffer to have the overlay's bit set.

Fix this by hanging on to the frontbuffer reference until the next
flip. And just to make this a bit more clear let's track the frontbuffer
explicitly instead of just grabbing it via the old vma.

Cc: stable@vger.kernel.org
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1136
Fixes: da42104f589d ("drm/i915: Hold reference to intel_frontbuffer as we track activity")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
 drivers/gpu/drm/i915/display/intel_overlay.c | 17 ++++++++---------
 1 file changed, 8 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_overlay.c b/drivers/gpu/drm/i915/display/intel_overlay.c
index 9c0113f15b58..ef8f44f5e751 100644
--- a/drivers/gpu/drm/i915/display/intel_overlay.c
+++ b/drivers/gpu/drm/i915/display/intel_overlay.c
@@ -183,6 +183,7 @@ struct intel_overlay {
 	struct intel_crtc *crtc;
 	struct i915_vma *vma;
 	struct i915_vma *old_vma;
+	struct intel_frontbuffer *frontbuffer;
 	bool active;
 	bool pfit_active;
 	u32 pfit_vscale_ratio; /* shifted-point number, (1<<12) == 1.0 */
@@ -283,21 +284,19 @@ static void intel_overlay_flip_prepare(struct intel_overlay *overlay,
 				       struct i915_vma *vma)
 {
 	enum pipe pipe = overlay->crtc->pipe;
-	struct intel_frontbuffer *from = NULL, *to = NULL;
+	struct intel_frontbuffer *frontbuffer = NULL;
 
 	drm_WARN_ON(&overlay->i915->drm, overlay->old_vma);
 
-	if (overlay->vma)
-		from = intel_frontbuffer_get(overlay->vma->obj);
 	if (vma)
-		to = intel_frontbuffer_get(vma->obj);
+		frontbuffer = intel_frontbuffer_get(vma->obj);
 
-	intel_frontbuffer_track(from, to, INTEL_FRONTBUFFER_OVERLAY(pipe));
+	intel_frontbuffer_track(overlay->frontbuffer, frontbuffer,
+				INTEL_FRONTBUFFER_OVERLAY(pipe));
 
-	if (to)
-		intel_frontbuffer_put(to);
-	if (from)
-		intel_frontbuffer_put(from);
+	if (overlay->frontbuffer)
+		intel_frontbuffer_put(overlay->frontbuffer);
+	overlay->frontbuffer = frontbuffer;
 
 	intel_frontbuffer_flip_prepare(overlay->i915,
 				       INTEL_FRONTBUFFER_OVERLAY(pipe));
-- 
2.26.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [PATCH 2/3] drm/i915: Fix overlay frontbuffer tracking

[Chris Wilson]

Quoting Ville Syrjala (2021-02-09 02:19:17)
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> 
> We don't have a persistent fb holding a reference to the frontbuffer
> object, so every time we do the get+put we throw the frontbuffer object
> immediately away. And so the next time around we get a pristine
> frontbuffer object with bits==0 even for the old vma. This confuses
> the frontbuffer tracking code which understandably expects the old
> frontbuffer to have the overlay's bit set.
> 
> Fix this by hanging on to the frontbuffer reference until the next
> flip. And just to make this a bit more clear let's track the frontbuffer
> explicitly instead of just grabbing it via the old vma.
> 
> Cc: stable@vger.kernel.org
> Cc: Chris Wilson <chris@chris-wilson.co.uk>
> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1136
> Fixes: da42104f589d ("drm/i915: Hold reference to intel_frontbuffer as we track activity")

Maybe more apropos, same kernel though
Fixes: 8e7cb1799b4f ("drm/i915: Extract intel_frontbuffer active tracking")

Ok, so this definitely used to be swapping between the
obj->frontbuffer_bits and so used to have a persistent reference.
Keeping the frontbuffer tracking with the overlay makes even more sense.

> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

> ---
>  drivers/gpu/drm/i915/display/intel_overlay.c | 17 ++++++++---------
>  1 file changed, 8 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_overlay.c b/drivers/gpu/drm/i915/display/intel_overlay.c
> index 9c0113f15b58..ef8f44f5e751 100644
> --- a/drivers/gpu/drm/i915/display/intel_overlay.c
> +++ b/drivers/gpu/drm/i915/display/intel_overlay.c
> @@ -183,6 +183,7 @@ struct intel_overlay {
>         struct intel_crtc *crtc;
>         struct i915_vma *vma;
>         struct i915_vma *old_vma;
> +       struct intel_frontbuffer *frontbuffer;
>         bool active;
>         bool pfit_active;
>         u32 pfit_vscale_ratio; /* shifted-point number, (1<<12) == 1.0 */
> @@ -283,21 +284,19 @@ static void intel_overlay_flip_prepare(struct intel_overlay *overlay,
>                                        struct i915_vma *vma)
>  {
>         enum pipe pipe = overlay->crtc->pipe;
> -       struct intel_frontbuffer *from = NULL, *to = NULL;
> +       struct intel_frontbuffer *frontbuffer = NULL;
>  
>         drm_WARN_ON(&overlay->i915->drm, overlay->old_vma);
>  
> -       if (overlay->vma)
> -               from = intel_frontbuffer_get(overlay->vma->obj);
>         if (vma)
> -               to = intel_frontbuffer_get(vma->obj);
> +               frontbuffer = intel_frontbuffer_get(vma->obj);
>  
> -       intel_frontbuffer_track(from, to, INTEL_FRONTBUFFER_OVERLAY(pipe));
> +       intel_frontbuffer_track(overlay->frontbuffer, frontbuffer,
> +                               INTEL_FRONTBUFFER_OVERLAY(pipe));
>  
> -       if (to)
> -               intel_frontbuffer_put(to);
> -       if (from)
> -               intel_frontbuffer_put(from);
> +       if (overlay->frontbuffer)
> +               intel_frontbuffer_put(overlay->frontbuffer);
> +       overlay->frontbuffer = frontbuffer;

And this will drop the ref on overlay->frontbuffer as we flip to NULL on
shutdown.

Now if only someone still had the code to expose sprites instead of
overlays.
-Chris

Re: [Intel-gfx] [PATCH 2/3] drm/i915: Fix overlay frontbuffer tracking

[Chris Wilson]

Quoting Ville Syrjala (2021-02-09 02:19:17)
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> 
> We don't have a persistent fb holding a reference to the frontbuffer
> object, so every time we do the get+put we throw the frontbuffer object
> immediately away. And so the next time around we get a pristine
> frontbuffer object with bits==0 even for the old vma. This confuses
> the frontbuffer tracking code which understandably expects the old
> frontbuffer to have the overlay's bit set.
> 
> Fix this by hanging on to the frontbuffer reference until the next
> flip. And just to make this a bit more clear let's track the frontbuffer
> explicitly instead of just grabbing it via the old vma.
> 
> Cc: stable@vger.kernel.org
> Cc: Chris Wilson <chris@chris-wilson.co.uk>
> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1136
> Fixes: da42104f589d ("drm/i915: Hold reference to intel_frontbuffer as we track activity")

Maybe more apropos, same kernel though
Fixes: 8e7cb1799b4f ("drm/i915: Extract intel_frontbuffer active tracking")

Ok, so this definitely used to be swapping between the
obj->frontbuffer_bits and so used to have a persistent reference.
Keeping the frontbuffer tracking with the overlay makes even more sense.

> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

> ---
>  drivers/gpu/drm/i915/display/intel_overlay.c | 17 ++++++++---------
>  1 file changed, 8 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_overlay.c b/drivers/gpu/drm/i915/display/intel_overlay.c
> index 9c0113f15b58..ef8f44f5e751 100644
> --- a/drivers/gpu/drm/i915/display/intel_overlay.c
> +++ b/drivers/gpu/drm/i915/display/intel_overlay.c
> @@ -183,6 +183,7 @@ struct intel_overlay {
>         struct intel_crtc *crtc;
>         struct i915_vma *vma;
>         struct i915_vma *old_vma;
> +       struct intel_frontbuffer *frontbuffer;
>         bool active;
>         bool pfit_active;
>         u32 pfit_vscale_ratio; /* shifted-point number, (1<<12) == 1.0 */
> @@ -283,21 +284,19 @@ static void intel_overlay_flip_prepare(struct intel_overlay *overlay,
>                                        struct i915_vma *vma)
>  {
>         enum pipe pipe = overlay->crtc->pipe;
> -       struct intel_frontbuffer *from = NULL, *to = NULL;
> +       struct intel_frontbuffer *frontbuffer = NULL;
>  
>         drm_WARN_ON(&overlay->i915->drm, overlay->old_vma);
>  
> -       if (overlay->vma)
> -               from = intel_frontbuffer_get(overlay->vma->obj);
>         if (vma)
> -               to = intel_frontbuffer_get(vma->obj);
> +               frontbuffer = intel_frontbuffer_get(vma->obj);
>  
> -       intel_frontbuffer_track(from, to, INTEL_FRONTBUFFER_OVERLAY(pipe));
> +       intel_frontbuffer_track(overlay->frontbuffer, frontbuffer,
> +                               INTEL_FRONTBUFFER_OVERLAY(pipe));
>  
> -       if (to)
> -               intel_frontbuffer_put(to);
> -       if (from)
> -               intel_frontbuffer_put(from);
> +       if (overlay->frontbuffer)
> +               intel_frontbuffer_put(overlay->frontbuffer);
> +       overlay->frontbuffer = frontbuffer;

And this will drop the ref on overlay->frontbuffer as we flip to NULL on
shutdown.

Now if only someone still had the code to expose sprites instead of
overlays.
-Chris
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] [PATCH 3/3] drm/i915: Warn when releasing a frontbuffer while in use

[Ville Syrjala]

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

Let's scream if we are about to release a frontbuffer which
is still in use.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
 drivers/gpu/drm/i915/display/intel_frontbuffer.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/i915/display/intel_frontbuffer.c b/drivers/gpu/drm/i915/display/intel_frontbuffer.c
index 7b38eee9980f..6fc6965b6133 100644
--- a/drivers/gpu/drm/i915/display/intel_frontbuffer.c
+++ b/drivers/gpu/drm/i915/display/intel_frontbuffer.c
@@ -224,6 +224,8 @@ static void frontbuffer_release(struct kref *ref)
 	struct drm_i915_gem_object *obj = front->obj;
 	struct i915_vma *vma;
 
+	drm_WARN_ON(obj->base.dev, atomic_read(&front->bits));
+
 	spin_lock(&obj->vma.lock);
 	for_each_ggtt_vma(vma, obj) {
 		i915_vma_clear_scanout(vma);
-- 
2.26.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [Intel-gfx] [PATCH 3/3] drm/i915: Warn when releasing a frontbuffer while in use

[Chris Wilson]

Quoting Ville Syrjala (2021-02-09 02:19:18)
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> 
> Let's scream if we are about to release a frontbuffer which
> is still in use.
> 
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_frontbuffer.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_frontbuffer.c b/drivers/gpu/drm/i915/display/intel_frontbuffer.c
> index 7b38eee9980f..6fc6965b6133 100644
> --- a/drivers/gpu/drm/i915/display/intel_frontbuffer.c
> +++ b/drivers/gpu/drm/i915/display/intel_frontbuffer.c
> @@ -224,6 +224,8 @@ static void frontbuffer_release(struct kref *ref)
>         struct drm_i915_gem_object *obj = front->obj;
>         struct i915_vma *vma;
>  
> +       drm_WARN_ON(obj->base.dev, atomic_read(&front->bits));

I had to double check the meaning of bits, and indeed they are cleared
by intel_frontbuffer_track as the scanout is switched away from the
object. A stacktrace here isn't particularly useful for tracking down
the leak, but it is a trivial method to make CI pay attention.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
-Chris
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for series starting with [1/3] drm/i915: Disallow plane x+w>stride on ilk+ with X-tiling

[Patchwork]

== Series Details ==

Series: series starting with [1/3] drm/i915: Disallow plane x+w>stride on ilk+ with X-tiling
URL   : https://patchwork.freedesktop.org/series/86882/
State : warning

== Summary ==

$ dim checkpatch origin/drm-tip
d3049184b718 drm/i915: Disallow plane x+w>stride on ilk+ with X-tiling
-:16: WARNING:REPEATED_WORD: Possible repeated word: 'just'
#16: 
On ilk/snb/ivb it looks like the accesses just just wrap

total: 0 errors, 1 warnings, 0 checks, 33 lines checked
16380d000219 drm/i915: Fix overlay frontbuffer tracking
17d615fa2b9d drm/i915: Warn when releasing a frontbuffer while in use


_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] ✗ Fi.CI.BAT: failure for series starting with [1/3] drm/i915: Disallow plane x+w>stride on ilk+ with X-tiling

[Patchwork]

[-- Attachment #1.1: Type: text/plain, Size: 6706 bytes --]

== Series Details ==

Series: series starting with [1/3] drm/i915: Disallow plane x+w>stride on ilk+ with X-tiling
URL   : https://patchwork.freedesktop.org/series/86882/
State : failure

== Summary ==

CI Bug Log - changes from CI_DRM_9747 -> Patchwork_19637
====================================================

Summary
-------

  **FAILURE**

  Serious unknown changes coming with Patchwork_19637 absolutely need to be
  verified manually.
  
  If you think the reported changes have nothing to do with the changes
  introduced in Patchwork_19637, please notify your bug team to allow them
  to document this new failure mode, which will reduce false positives in CI.

  External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/index.html

Possible new issues
-------------------

  Here are the unknown changes that may have been introduced in Patchwork_19637:

### IGT changes ###

#### Possible regressions ####

  * igt@vgem_basic@unload:
    - fi-kbl-soraka:      NOTRUN -> [DMESG-WARN][1]
   [1]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/fi-kbl-soraka/igt@vgem_basic@unload.html

  
Known issues
------------

  Here are the changes found in Patchwork_19637 that come from known issues:

### IGT changes ###

#### Issues hit ####

  * igt@amdgpu/amd_cs_nop@sync-fork-gfx0:
    - fi-cfl-8700k:       NOTRUN -> [SKIP][2] ([fdo#109271]) +25 similar issues
   [2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/fi-cfl-8700k/igt@amdgpu/amd_cs_nop@sync-fork-gfx0.html

  * igt@gem_exec_fence@basic-busy@bcs0:
    - fi-kbl-soraka:      NOTRUN -> [SKIP][3] ([fdo#109271]) +23 similar issues
   [3]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/fi-kbl-soraka/igt@gem_exec_fence@basic-busy@bcs0.html

  * igt@gem_exec_suspend@basic-s3:
    - fi-tgl-u2:          [PASS][4] -> [FAIL][5] ([i915#1888])
   [4]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/fi-tgl-u2/igt@gem_exec_suspend@basic-s3.html
   [5]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/fi-tgl-u2/igt@gem_exec_suspend@basic-s3.html
    - fi-tgl-y:           [PASS][6] -> [DMESG-WARN][7] ([i915#2411] / [i915#402])
   [6]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/fi-tgl-y/igt@gem_exec_suspend@basic-s3.html
   [7]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/fi-tgl-y/igt@gem_exec_suspend@basic-s3.html

  * igt@gem_huc_copy@huc-copy:
    - fi-kbl-soraka:      NOTRUN -> [SKIP][8] ([fdo#109271] / [i915#2190])
   [8]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/fi-kbl-soraka/igt@gem_huc_copy@huc-copy.html
    - fi-cfl-8700k:       NOTRUN -> [SKIP][9] ([fdo#109271] / [i915#2190])
   [9]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/fi-cfl-8700k/igt@gem_huc_copy@huc-copy.html

  * igt@i915_selftest@live@gt_pm:
    - fi-kbl-soraka:      NOTRUN -> [DMESG-FAIL][10] ([i915#1886] / [i915#2291])
   [10]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/fi-kbl-soraka/igt@i915_selftest@live@gt_pm.html

  * igt@kms_chamelium@common-hpd-after-suspend:
    - fi-kbl-soraka:      NOTRUN -> [SKIP][11] ([fdo#109271] / [fdo#111827]) +8 similar issues
   [11]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/fi-kbl-soraka/igt@kms_chamelium@common-hpd-after-suspend.html

  * igt@kms_chamelium@vga-edid-read:
    - fi-cfl-8700k:       NOTRUN -> [SKIP][12] ([fdo#109271] / [fdo#111827]) +8 similar issues
   [12]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/fi-cfl-8700k/igt@kms_chamelium@vga-edid-read.html

  * igt@kms_pipe_crc_basic@compare-crc-sanitycheck-pipe-d:
    - fi-cfl-8700k:       NOTRUN -> [SKIP][13] ([fdo#109271] / [i915#533])
   [13]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/fi-cfl-8700k/igt@kms_pipe_crc_basic@compare-crc-sanitycheck-pipe-d.html
    - fi-kbl-soraka:      NOTRUN -> [SKIP][14] ([fdo#109271] / [i915#533])
   [14]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/fi-kbl-soraka/igt@kms_pipe_crc_basic@compare-crc-sanitycheck-pipe-d.html

  * igt@prime_vgem@basic-write:
    - fi-tgl-y:           [PASS][15] -> [DMESG-WARN][16] ([i915#402]) +2 similar issues
   [15]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/fi-tgl-y/igt@prime_vgem@basic-write.html
   [16]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/fi-tgl-y/igt@prime_vgem@basic-write.html

  * igt@runner@aborted:
    - fi-bdw-5557u:       NOTRUN -> [FAIL][17] ([i915#1602] / [i915#2029] / [i915#2369])
   [17]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/fi-bdw-5557u/igt@runner@aborted.html

  
#### Possible fixes ####

  * igt@prime_self_import@basic-with_two_bos:
    - fi-tgl-y:           [DMESG-WARN][18] ([i915#402]) -> [PASS][19] +1 similar issue
   [18]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/fi-tgl-y/igt@prime_self_import@basic-with_two_bos.html
   [19]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/fi-tgl-y/igt@prime_self_import@basic-with_two_bos.html

  
  [fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
  [fdo#111827]: https://bugs.freedesktop.org/show_bug.cgi?id=111827
  [i915#1602]: https://gitlab.freedesktop.org/drm/intel/issues/1602
  [i915#1886]: https://gitlab.freedesktop.org/drm/intel/issues/1886
  [i915#1888]: https://gitlab.freedesktop.org/drm/intel/issues/1888
  [i915#2029]: https://gitlab.freedesktop.org/drm/intel/issues/2029
  [i915#2190]: https://gitlab.freedesktop.org/drm/intel/issues/2190
  [i915#2291]: https://gitlab.freedesktop.org/drm/intel/issues/2291
  [i915#2369]: https://gitlab.freedesktop.org/drm/intel/issues/2369
  [i915#2411]: https://gitlab.freedesktop.org/drm/intel/issues/2411
  [i915#402]: https://gitlab.freedesktop.org/drm/intel/issues/402
  [i915#533]: https://gitlab.freedesktop.org/drm/intel/issues/533


Participating hosts (42 -> 38)
------------------------------

  Additional (2): fi-kbl-soraka fi-cfl-8700k 
  Missing    (6): fi-jsl-1 fi-ilk-m540 fi-hsw-4200u fi-bsw-cyan fi-ctg-p8600 fi-bdw-samus 


Build changes
-------------

  * Linux: CI_DRM_9747 -> Patchwork_19637

  CI-20190529: 20190529
  CI_DRM_9747: 65d67e70f9f78c7f8c2796956fdbdb69cffc7c98 @ git://anongit.freedesktop.org/gfx-ci/linux
  IGT_5998: b0160aad9e547d2205341e0b6783e12aa143566e @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
  Patchwork_19637: 17d615fa2b9d9c37493ff55c2868a9bf5e40db1e @ git://anongit.freedesktop.org/gfx-ci/linux


== Linux commits ==

17d615fa2b9d drm/i915: Warn when releasing a frontbuffer while in use
16380d000219 drm/i915: Fix overlay frontbuffer tracking
d3049184b718 drm/i915: Disallow plane x+w>stride on ilk+ with X-tiling

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/index.html

[-- Attachment #1.2: Type: text/html, Size: 8472 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [Intel-gfx] ✗ Fi.CI.BAT: failure for series starting with [1/3] drm/i915: Disallow plane x+w>stride on ilk+ with X-tiling

[Ville Syrjälä]

On Tue, Feb 09, 2021 at 03:22:09AM -0000, Patchwork wrote:
> == Series Details ==
> 
> Series: series starting with [1/3] drm/i915: Disallow plane x+w>stride on ilk+ with X-tiling
> URL   : https://patchwork.freedesktop.org/series/86882/
> State : failure
> 
> == Summary ==
> 
> CI Bug Log - changes from CI_DRM_9747 -> Patchwork_19637
> ====================================================
> 
> Summary
> -------
> 
>   **FAILURE**
> 
>   Serious unknown changes coming with Patchwork_19637 absolutely need to be
>   verified manually.
>   
>   If you think the reported changes have nothing to do with the changes
>   introduced in Patchwork_19637, please notify your bug team to allow them
>   to document this new failure mode, which will reduce false positives in CI.
> 
>   External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/index.html
> 
> Possible new issues
> -------------------
> 
>   Here are the unknown changes that may have been introduced in Patchwork_19637:
> 
> ### IGT changes ###
> 
> #### Possible regressions ####
> 
>   * igt@vgem_basic@unload:
>     - fi-kbl-soraka:      NOTRUN -> [DMESG-WARN][1]
>    [1]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/fi-kbl-soraka/igt@vgem_basic@unload.html

<3> [558.016425] i915 0000:00:02.0: [drm] *ERROR* Potential atomic update failure on pipe A

I guess we've been throwing that under these two:
https://gitlab.freedesktop.org/drm/intel/-/issues/86
https://gitlab.freedesktop.org/drm/intel/-/issues/558

-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [Intel-gfx] [PATCH 1/3] drm/i915: Disallow plane x+w>stride on ilk+ with X-tiling

[Chris Wilson]

Quoting Ville Syrjala (2021-02-09 02:19:16)
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> 
> ilk+ planes get notably unhappy when the plane x+w exceeds
> the stride. This wasn't a problem previously because we
> always aligned SURF to the closest tile boundary so the
> x offset never got particularly large. But now with async
> flips we have to align to 256KiB instead and thus this
> becomes a real issue.
> 
> On ilk/snb/ivb it looks like the accesses just just wrap
> early to the next tile row when scanout goes past the
> SURF+n*stride boundary, hsw/bdw suffer more heavily and
> start to underrun constantly. i965/g4x appear to be immune.
> vlv/chv I've not yet checked.
> 
> Let's borrow another trick from the skl+ code and search
> backwards for a better SURF offset in the hopes of getting the
> x offset below the limit. IIRC when I ran into a similar issue
> on skl years ago it was causing the hardware to fall over
> pretty hard as well.
> 
> And let's be consistent and include i965/g4x in the check
> as well, just in case I just got super lucky somehow when
> I wasn't able to reproduce the issue. Not that it really
> matters since we still use 4k SURF alignment for i965/g4x
> anyway.
> 
> Fixes: 6ede6b0616b2 ("drm/i915: Implement async flips for vlv/chv")
> Fixes: 4bb18054adc4 ("drm/i915: Implement async flip for ilk/snb")
> Fixes: 2a636e240c77 ("drm/i915: Implement async flip for ivb/hsw")
> Fixes: cda195f13abd ("drm/i915: Implement async flips for bdw")
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> ---
>  drivers/gpu/drm/i915/display/i9xx_plane.c | 27 +++++++++++++++++++++++
>  1 file changed, 27 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/display/i9xx_plane.c b/drivers/gpu/drm/i915/display/i9xx_plane.c
> index 0523e2c79d16..8a52beaed2da 100644
> --- a/drivers/gpu/drm/i915/display/i9xx_plane.c
> +++ b/drivers/gpu/drm/i915/display/i9xx_plane.c
> @@ -255,6 +255,33 @@ int i9xx_check_plane_surface(struct intel_plane_state *plane_state)
>         else
>                 offset = 0;
>  
> +       /*
> +        * When using an X-tiled surface the plane starts to
> +        * misbehave if the x offset + width exceeds the stride.
> +        * hsw/bdw: underrun galore
> +        * ilk/snb/ivb: wrap to the next tile row mid scanout
> +        * i965/g4x: so far appear immune to this
> +        * vlv/chv: TODO check
> +        *
> +        * Linear surfaces seem to work just fine, even on hsw/bdw
> +        * despite them not using the linear offset anymore.
> +        */
> +       if (INTEL_GEN(dev_priv) >= 4 && fb->modifier == I915_FORMAT_MOD_X_TILED) {
> +               u32 alignment = intel_surf_alignment(fb, 0);
> +               int cpp = fb->format->cpp[0];
> +
> +               while ((src_x + src_w) * cpp > plane_state->color_plane[0].stride) {
> +                       if (offset == 0) {
> +                               drm_dbg_kms(&dev_priv->drm,
> +                                           "Unable to find suitable display surface offset due to X-tiling\n");
> +                               return -EINVAL;
> +                       }
> +
> +                       offset = intel_plane_adjust_aligned_offset(&src_x, &src_y, plane_state, 0,
> +                                                                  offset, offset - alignment);

As offset decreases, src_x goes up; but modulus the pitch. So long as
the alignment is not a multiple of the pitch, src_x will change on each
iteration. And after the adjustment, the offset is stored in
plane_state.

So this loop would fail for any power-of-two stride, but at the same
time that would put the src_x + src_w out-of-bounds in the supplied
coordinates. The only way src_x + src_w would exceed stride legally is
if we have chosen an aligned offset that causes that, thus there should
exist an offset where src_x + src_w does not exceed the stride.

The reason for choosing a nearby tile offset was to reduce src_x/src_y
to fit within the crtc limits. While remapping could be used to solve
that, the aligned_offset computation allows reuse of a single view.

Since offset, src_x are a function of the plane input parameters, this
should be possible to exercise with carefully selected framebuffers and
modesetting. Right? Is there a test case for this?

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
-Chris
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [Intel-gfx] [PATCH 1/3] drm/i915: Disallow plane x+w>stride on ilk+ with X-tiling

[Chris Wilson]

Quoting Chris Wilson (2021-02-09 09:22:09)
> Quoting Ville Syrjala (2021-02-09 02:19:16)
> > +               while ((src_x + src_w) * cpp > plane_state->color_plane[0].stride) {
> > +                       if (offset == 0) {
> > +                               drm_dbg_kms(&dev_priv->drm,
> > +                                           "Unable to find suitable display surface offset due to X-tiling\n");
> > +                               return -EINVAL;
> > +                       }
> > +
> > +                       offset = intel_plane_adjust_aligned_offset(&src_x, &src_y, plane_state, 0,
> > +                                                                  offset, offset - alignment);

> The reason for choosing a nearby tile offset was to reduce src_x/src_y
> to fit within the crtc limits. While remapping could be used to solve
> that, the aligned_offset computation allows reuse of a single view.

Should there not be a second constraint on the loop to make sure src_x +
src_w is less than 4095/8191/etc?
-Chris
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [Intel-gfx] [PATCH 1/3] drm/i915: Disallow plane x+w>stride on ilk+ with X-tiling

[Ville Syrjälä]

On Tue, Feb 09, 2021 at 09:50:28AM +0000, Chris Wilson wrote:
> Quoting Chris Wilson (2021-02-09 09:22:09)
> > Quoting Ville Syrjala (2021-02-09 02:19:16)
> > > +               while ((src_x + src_w) * cpp > plane_state->color_plane[0].stride) {
> > > +                       if (offset == 0) {
> > > +                               drm_dbg_kms(&dev_priv->drm,
> > > +                                           "Unable to find suitable display surface offset due to X-tiling\n");
> > > +                               return -EINVAL;
> > > +                       }
> > > +
> > > +                       offset = intel_plane_adjust_aligned_offset(&src_x, &src_y, plane_state, 0,
> > > +                                                                  offset, offset - alignment);
> 
> > The reason for choosing a nearby tile offset was to reduce src_x/src_y
> > to fit within the crtc limits. While remapping could be used to solve
> > that, the aligned_offset computation allows reuse of a single view.
> 
> Should there not be a second constraint on the loop to make sure src_x +
> src_w is less than 4095/8191/etc?

Yeah, but we don't have that in the skl code either atm.
Should add it to both.

And if it can actually fail I guess we should just fall back
to remapping rather than telling the user they can't have a
working display. So far I never did the mental gymnastics to
come up with an actually failing scenario.

-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [Intel-gfx] [PATCH 1/3] drm/i915: Disallow plane x+w>stride on ilk+ with X-tiling

[Ville Syrjälä]

On Tue, Feb 09, 2021 at 04:44:12PM +0200, Ville Syrjälä wrote:
> On Tue, Feb 09, 2021 at 09:50:28AM +0000, Chris Wilson wrote:
> > Quoting Chris Wilson (2021-02-09 09:22:09)
> > > Quoting Ville Syrjala (2021-02-09 02:19:16)
> > > > +               while ((src_x + src_w) * cpp > plane_state->color_plane[0].stride) {
> > > > +                       if (offset == 0) {
> > > > +                               drm_dbg_kms(&dev_priv->drm,
> > > > +                                           "Unable to find suitable display surface offset due to X-tiling\n");
> > > > +                               return -EINVAL;
> > > > +                       }
> > > > +
> > > > +                       offset = intel_plane_adjust_aligned_offset(&src_x, &src_y, plane_state, 0,
> > > > +                                                                  offset, offset - alignment);
> > 
> > > The reason for choosing a nearby tile offset was to reduce src_x/src_y
> > > to fit within the crtc limits. While remapping could be used to solve
> > > that, the aligned_offset computation allows reuse of a single view.
> > 
> > Should there not be a second constraint on the loop to make sure src_x +
> > src_w is less than 4095/8191/etc?
> 
> Yeah, but we don't have that in the skl code either atm.
> Should add it to both.

Actually no. We already cap the max stride such that it never
exceeds that limit. So the single check already covers that.

What I think we should be checking is that src_y stays below the
appropriate limit. Although I'm not sure if we could realistically
hit a case where that fails but still find a suitably aligned
offset before hitting 0. Oh and I've not actually confirmed
whether src_y+src_h also has an upper limit or not.

-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [Intel-gfx] [PATCH 1/3] drm/i915: Disallow plane x+w>stride on ilk+ with X-tiling

[Ville Syrjälä]

On Tue, Feb 09, 2021 at 09:22:09AM +0000, Chris Wilson wrote:
> Quoting Ville Syrjala (2021-02-09 02:19:16)
> > From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > 
> > ilk+ planes get notably unhappy when the plane x+w exceeds
> > the stride. This wasn't a problem previously because we
> > always aligned SURF to the closest tile boundary so the
> > x offset never got particularly large. But now with async
> > flips we have to align to 256KiB instead and thus this
> > becomes a real issue.
> > 
> > On ilk/snb/ivb it looks like the accesses just just wrap
> > early to the next tile row when scanout goes past the
> > SURF+n*stride boundary, hsw/bdw suffer more heavily and
> > start to underrun constantly. i965/g4x appear to be immune.
> > vlv/chv I've not yet checked.
> > 
> > Let's borrow another trick from the skl+ code and search
> > backwards for a better SURF offset in the hopes of getting the
> > x offset below the limit. IIRC when I ran into a similar issue
> > on skl years ago it was causing the hardware to fall over
> > pretty hard as well.
> > 
> > And let's be consistent and include i965/g4x in the check
> > as well, just in case I just got super lucky somehow when
> > I wasn't able to reproduce the issue. Not that it really
> > matters since we still use 4k SURF alignment for i965/g4x
> > anyway.
> > 
> > Fixes: 6ede6b0616b2 ("drm/i915: Implement async flips for vlv/chv")
> > Fixes: 4bb18054adc4 ("drm/i915: Implement async flip for ilk/snb")
> > Fixes: 2a636e240c77 ("drm/i915: Implement async flip for ivb/hsw")
> > Fixes: cda195f13abd ("drm/i915: Implement async flips for bdw")
> > Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > ---
> >  drivers/gpu/drm/i915/display/i9xx_plane.c | 27 +++++++++++++++++++++++
> >  1 file changed, 27 insertions(+)
> > 
> > diff --git a/drivers/gpu/drm/i915/display/i9xx_plane.c b/drivers/gpu/drm/i915/display/i9xx_plane.c
> > index 0523e2c79d16..8a52beaed2da 100644
> > --- a/drivers/gpu/drm/i915/display/i9xx_plane.c
> > +++ b/drivers/gpu/drm/i915/display/i9xx_plane.c
> > @@ -255,6 +255,33 @@ int i9xx_check_plane_surface(struct intel_plane_state *plane_state)
> >         else
> >                 offset = 0;
> >  
> > +       /*
> > +        * When using an X-tiled surface the plane starts to
> > +        * misbehave if the x offset + width exceeds the stride.
> > +        * hsw/bdw: underrun galore
> > +        * ilk/snb/ivb: wrap to the next tile row mid scanout
> > +        * i965/g4x: so far appear immune to this
> > +        * vlv/chv: TODO check
> > +        *
> > +        * Linear surfaces seem to work just fine, even on hsw/bdw
> > +        * despite them not using the linear offset anymore.
> > +        */
> > +       if (INTEL_GEN(dev_priv) >= 4 && fb->modifier == I915_FORMAT_MOD_X_TILED) {
> > +               u32 alignment = intel_surf_alignment(fb, 0);
> > +               int cpp = fb->format->cpp[0];
> > +
> > +               while ((src_x + src_w) * cpp > plane_state->color_plane[0].stride) {
> > +                       if (offset == 0) {
> > +                               drm_dbg_kms(&dev_priv->drm,
> > +                                           "Unable to find suitable display surface offset due to X-tiling\n");
> > +                               return -EINVAL;
> > +                       }
> > +
> > +                       offset = intel_plane_adjust_aligned_offset(&src_x, &src_y, plane_state, 0,
> > +                                                                  offset, offset - alignment);
> 
> As offset decreases, src_x goes up; but modulus the pitch. So long as
> the alignment is not a multiple of the pitch, src_x will change on each
> iteration. And after the adjustment, the offset is stored in
> plane_state.
> 
> So this loop would fail for any power-of-two stride, but at the same
> time that would put the src_x + src_w out-of-bounds in the supplied
> coordinates. The only way src_x + src_w would exceed stride legally is
> if we have chosen an aligned offset that causes that, thus there should
> exist an offset where src_x + src_w does not exceed the stride.
> 
> The reason for choosing a nearby tile offset was to reduce src_x/src_y
> to fit within the crtc limits. While remapping could be used to solve
> that, the aligned_offset computation allows reuse of a single view.
> 
> Since offset, src_x are a function of the plane input parameters, this
> should be possible to exercise with carefully selected framebuffers and
> modesetting. Right? Is there a test case for this?

My idea was to extend kms_big_fb for these sort of things.
While I originally made it purely to test remapping it should
be possible to extend it for non-remapped fbs as well. IIRC 
J-P did at least some work towards that goal, but I guess
it's only in the internal copy for whatever reason.

> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

Ta.

-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [Intel-gfx] [PATCH 1/3] drm/i915: Disallow plane x+w>stride on ilk+ with X-tiling

[Juha-Pekka Heikkila]

On 9.2.2021 17.21, Ville Syrjälä wrote:
> On Tue, Feb 09, 2021 at 09:22:09AM +0000, Chris Wilson wrote:
>> Quoting Ville Syrjala (2021-02-09 02:19:16)
>>> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
>>>
>>> ilk+ planes get notably unhappy when the plane x+w exceeds
>>> the stride. This wasn't a problem previously because we
>>> always aligned SURF to the closest tile boundary so the
>>> x offset never got particularly large. But now with async
>>> flips we have to align to 256KiB instead and thus this
>>> becomes a real issue.
>>>
>>> On ilk/snb/ivb it looks like the accesses just just wrap
>>> early to the next tile row when scanout goes past the
>>> SURF+n*stride boundary, hsw/bdw suffer more heavily and
>>> start to underrun constantly. i965/g4x appear to be immune.
>>> vlv/chv I've not yet checked.
>>>
>>> Let's borrow another trick from the skl+ code and search
>>> backwards for a better SURF offset in the hopes of getting the
>>> x offset below the limit. IIRC when I ran into a similar issue
>>> on skl years ago it was causing the hardware to fall over
>>> pretty hard as well.
>>>
>>> And let's be consistent and include i965/g4x in the check
>>> as well, just in case I just got super lucky somehow when
>>> I wasn't able to reproduce the issue. Not that it really
>>> matters since we still use 4k SURF alignment for i965/g4x
>>> anyway.
>>>
>>> Fixes: 6ede6b0616b2 ("drm/i915: Implement async flips for vlv/chv")
>>> Fixes: 4bb18054adc4 ("drm/i915: Implement async flip for ilk/snb")
>>> Fixes: 2a636e240c77 ("drm/i915: Implement async flip for ivb/hsw")
>>> Fixes: cda195f13abd ("drm/i915: Implement async flips for bdw")
>>> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
>>> ---
>>>   drivers/gpu/drm/i915/display/i9xx_plane.c | 27 +++++++++++++++++++++++
>>>   1 file changed, 27 insertions(+)
>>>
>>> diff --git a/drivers/gpu/drm/i915/display/i9xx_plane.c b/drivers/gpu/drm/i915/display/i9xx_plane.c
>>> index 0523e2c79d16..8a52beaed2da 100644
>>> --- a/drivers/gpu/drm/i915/display/i9xx_plane.c
>>> +++ b/drivers/gpu/drm/i915/display/i9xx_plane.c
>>> @@ -255,6 +255,33 @@ int i9xx_check_plane_surface(struct intel_plane_state *plane_state)
>>>          else
>>>                  offset = 0;
>>>   
>>> +       /*
>>> +        * When using an X-tiled surface the plane starts to
>>> +        * misbehave if the x offset + width exceeds the stride.
>>> +        * hsw/bdw: underrun galore
>>> +        * ilk/snb/ivb: wrap to the next tile row mid scanout
>>> +        * i965/g4x: so far appear immune to this
>>> +        * vlv/chv: TODO check
>>> +        *
>>> +        * Linear surfaces seem to work just fine, even on hsw/bdw
>>> +        * despite them not using the linear offset anymore.
>>> +        */
>>> +       if (INTEL_GEN(dev_priv) >= 4 && fb->modifier == I915_FORMAT_MOD_X_TILED) {
>>> +               u32 alignment = intel_surf_alignment(fb, 0);
>>> +               int cpp = fb->format->cpp[0];
>>> +
>>> +               while ((src_x + src_w) * cpp > plane_state->color_plane[0].stride) {
>>> +                       if (offset == 0) {
>>> +                               drm_dbg_kms(&dev_priv->drm,
>>> +                                           "Unable to find suitable display surface offset due to X-tiling\n");
>>> +                               return -EINVAL;
>>> +                       }
>>> +
>>> +                       offset = intel_plane_adjust_aligned_offset(&src_x, &src_y, plane_state, 0,
>>> +                                                                  offset, offset - alignment);
>>
>> As offset decreases, src_x goes up; but modulus the pitch. So long as
>> the alignment is not a multiple of the pitch, src_x will change on each
>> iteration. And after the adjustment, the offset is stored in
>> plane_state.
>>
>> So this loop would fail for any power-of-two stride, but at the same
>> time that would put the src_x + src_w out-of-bounds in the supplied
>> coordinates. The only way src_x + src_w would exceed stride legally is
>> if we have chosen an aligned offset that causes that, thus there should
>> exist an offset where src_x + src_w does not exceed the stride.
>>
>> The reason for choosing a nearby tile offset was to reduce src_x/src_y
>> to fit within the crtc limits. While remapping could be used to solve
>> that, the aligned_offset computation allows reuse of a single view.
>>
>> Since offset, src_x are a function of the plane input parameters, this
>> should be possible to exercise with carefully selected framebuffers and
>> modesetting. Right? Is there a test case for this?
> 
> My idea was to extend kms_big_fb for these sort of things.
> While I originally made it purely to test remapping it should
> be possible to extend it for non-remapped fbs as well. IIRC
> J-P did at least some work towards that goal, but I guess
> it's only in the internal copy for whatever reason.

There are those max-hw-stride subtests in kms_big_fb which would go for 
this but it's all in internal trees.

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] ✓ Fi.CI.BAT: success for series starting with [1/3] drm/i915: Disallow plane x+w>stride on ilk+ with X-tiling

[Patchwork]

[-- Attachment #1.1: Type: text/plain, Size: 6308 bytes --]

== Series Details ==

Series: series starting with [1/3] drm/i915: Disallow plane x+w>stride on ilk+ with X-tiling
URL   : https://patchwork.freedesktop.org/series/86882/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_9747 -> Patchwork_19637
====================================================

Summary
-------

  **SUCCESS**

  No regressions found.

  External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/index.html

Known issues
------------

  Here are the changes found in Patchwork_19637 that come from known issues:

### IGT changes ###

#### Issues hit ####

  * igt@amdgpu/amd_cs_nop@sync-fork-gfx0:
    - fi-cfl-8700k:       NOTRUN -> [SKIP][1] ([fdo#109271]) +25 similar issues
   [1]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/fi-cfl-8700k/igt@amdgpu/amd_cs_nop@sync-fork-gfx0.html

  * igt@gem_exec_fence@basic-busy@bcs0:
    - fi-kbl-soraka:      NOTRUN -> [SKIP][2] ([fdo#109271]) +23 similar issues
   [2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/fi-kbl-soraka/igt@gem_exec_fence@basic-busy@bcs0.html

  * igt@gem_exec_suspend@basic-s3:
    - fi-tgl-u2:          [PASS][3] -> [FAIL][4] ([i915#1888])
   [3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/fi-tgl-u2/igt@gem_exec_suspend@basic-s3.html
   [4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/fi-tgl-u2/igt@gem_exec_suspend@basic-s3.html
    - fi-tgl-y:           [PASS][5] -> [DMESG-WARN][6] ([i915#2411] / [i915#402])
   [5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/fi-tgl-y/igt@gem_exec_suspend@basic-s3.html
   [6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/fi-tgl-y/igt@gem_exec_suspend@basic-s3.html

  * igt@gem_huc_copy@huc-copy:
    - fi-kbl-soraka:      NOTRUN -> [SKIP][7] ([fdo#109271] / [i915#2190])
   [7]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/fi-kbl-soraka/igt@gem_huc_copy@huc-copy.html
    - fi-cfl-8700k:       NOTRUN -> [SKIP][8] ([fdo#109271] / [i915#2190])
   [8]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/fi-cfl-8700k/igt@gem_huc_copy@huc-copy.html

  * igt@i915_selftest@live@gt_pm:
    - fi-kbl-soraka:      NOTRUN -> [DMESG-FAIL][9] ([i915#1886] / [i915#2291])
   [9]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/fi-kbl-soraka/igt@i915_selftest@live@gt_pm.html

  * igt@kms_chamelium@common-hpd-after-suspend:
    - fi-kbl-soraka:      NOTRUN -> [SKIP][10] ([fdo#109271] / [fdo#111827]) +8 similar issues
   [10]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/fi-kbl-soraka/igt@kms_chamelium@common-hpd-after-suspend.html

  * igt@kms_chamelium@vga-edid-read:
    - fi-cfl-8700k:       NOTRUN -> [SKIP][11] ([fdo#109271] / [fdo#111827]) +8 similar issues
   [11]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/fi-cfl-8700k/igt@kms_chamelium@vga-edid-read.html

  * igt@kms_pipe_crc_basic@compare-crc-sanitycheck-pipe-d:
    - fi-cfl-8700k:       NOTRUN -> [SKIP][12] ([fdo#109271] / [i915#533])
   [12]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/fi-cfl-8700k/igt@kms_pipe_crc_basic@compare-crc-sanitycheck-pipe-d.html
    - fi-kbl-soraka:      NOTRUN -> [SKIP][13] ([fdo#109271] / [i915#533])
   [13]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/fi-kbl-soraka/igt@kms_pipe_crc_basic@compare-crc-sanitycheck-pipe-d.html

  * igt@prime_vgem@basic-write:
    - fi-tgl-y:           [PASS][14] -> [DMESG-WARN][15] ([i915#402]) +2 similar issues
   [14]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/fi-tgl-y/igt@prime_vgem@basic-write.html
   [15]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/fi-tgl-y/igt@prime_vgem@basic-write.html

  * igt@runner@aborted:
    - fi-bdw-5557u:       NOTRUN -> [FAIL][16] ([i915#1602] / [i915#2029] / [i915#2369])
   [16]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/fi-bdw-5557u/igt@runner@aborted.html

  * igt@vgem_basic@unload:
    - fi-kbl-soraka:      NOTRUN -> [DMESG-WARN][17] ([i915#1982])
   [17]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/fi-kbl-soraka/igt@vgem_basic@unload.html

  
#### Possible fixes ####

  * igt@prime_self_import@basic-with_two_bos:
    - fi-tgl-y:           [DMESG-WARN][18] ([i915#402]) -> [PASS][19] +1 similar issue
   [18]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/fi-tgl-y/igt@prime_self_import@basic-with_two_bos.html
   [19]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/fi-tgl-y/igt@prime_self_import@basic-with_two_bos.html

  
  [fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
  [fdo#111827]: https://bugs.freedesktop.org/show_bug.cgi?id=111827
  [i915#1602]: https://gitlab.freedesktop.org/drm/intel/issues/1602
  [i915#1886]: https://gitlab.freedesktop.org/drm/intel/issues/1886
  [i915#1888]: https://gitlab.freedesktop.org/drm/intel/issues/1888
  [i915#1982]: https://gitlab.freedesktop.org/drm/intel/issues/1982
  [i915#2029]: https://gitlab.freedesktop.org/drm/intel/issues/2029
  [i915#2190]: https://gitlab.freedesktop.org/drm/intel/issues/2190
  [i915#2291]: https://gitlab.freedesktop.org/drm/intel/issues/2291
  [i915#2369]: https://gitlab.freedesktop.org/drm/intel/issues/2369
  [i915#2411]: https://gitlab.freedesktop.org/drm/intel/issues/2411
  [i915#402]: https://gitlab.freedesktop.org/drm/intel/issues/402
  [i915#533]: https://gitlab.freedesktop.org/drm/intel/issues/533


Participating hosts (42 -> 38)
------------------------------

  Additional (2): fi-kbl-soraka fi-cfl-8700k 
  Missing    (6): fi-jsl-1 fi-ilk-m540 fi-hsw-4200u fi-bsw-cyan fi-ctg-p8600 fi-bdw-samus 


Build changes
-------------

  * Linux: CI_DRM_9747 -> Patchwork_19637

  CI-20190529: 20190529
  CI_DRM_9747: 65d67e70f9f78c7f8c2796956fdbdb69cffc7c98 @ git://anongit.freedesktop.org/gfx-ci/linux
  IGT_5998: b0160aad9e547d2205341e0b6783e12aa143566e @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
  Patchwork_19637: 17d615fa2b9d9c37493ff55c2868a9bf5e40db1e @ git://anongit.freedesktop.org/gfx-ci/linux


== Linux commits ==

17d615fa2b9d drm/i915: Warn when releasing a frontbuffer while in use
16380d000219 drm/i915: Fix overlay frontbuffer tracking
d3049184b718 drm/i915: Disallow plane x+w>stride on ilk+ with X-tiling

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/index.html

[-- Attachment #1.2: Type: text/html, Size: 8062 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] ✓ Fi.CI.IGT: success for series starting with [1/3] drm/i915: Disallow plane x+w>stride on ilk+ with X-tiling

[Patchwork]

[-- Attachment #1.1: Type: text/plain, Size: 27530 bytes --]

== Series Details ==

Series: series starting with [1/3] drm/i915: Disallow plane x+w>stride on ilk+ with X-tiling
URL   : https://patchwork.freedesktop.org/series/86882/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_9747_full -> Patchwork_19637_full
====================================================

Summary
-------

  **SUCCESS**

  No regressions found.

  

Known issues
------------

  Here are the changes found in Patchwork_19637_full that come from known issues:

### IGT changes ###

#### Issues hit ####

  * igt@gem_eio@unwedge-stress:
    - shard-skl:          [PASS][1] -> [TIMEOUT][2] ([i915#1037] / [i915#2771])
   [1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-skl5/igt@gem_eio@unwedge-stress.html
   [2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-skl3/igt@gem_eio@unwedge-stress.html

  * igt@gem_exec_fair@basic-none@vcs0:
    - shard-kbl:          [PASS][3] -> [FAIL][4] ([i915#2842]) +2 similar issues
   [3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-kbl6/igt@gem_exec_fair@basic-none@vcs0.html
   [4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-kbl1/igt@gem_exec_fair@basic-none@vcs0.html

  * igt@gem_exec_fair@basic-none@vecs0:
    - shard-apl:          [PASS][5] -> [FAIL][6] ([i915#2842])
   [5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-apl4/igt@gem_exec_fair@basic-none@vecs0.html
   [6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-apl8/igt@gem_exec_fair@basic-none@vecs0.html

  * igt@gem_exec_fair@basic-pace-share@rcs0:
    - shard-glk:          [PASS][7] -> [FAIL][8] ([i915#2842])
   [7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-glk3/igt@gem_exec_fair@basic-pace-share@rcs0.html
   [8]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-glk7/igt@gem_exec_fair@basic-pace-share@rcs0.html

  * igt@gem_exec_reloc@basic-wide-active@vcs1:
    - shard-iclb:         NOTRUN -> [FAIL][9] ([i915#2389])
   [9]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-iclb4/igt@gem_exec_reloc@basic-wide-active@vcs1.html

  * igt@gem_exec_schedule@u-fairslice@rcs0:
    - shard-apl:          [PASS][10] -> [DMESG-WARN][11] ([i915#1610])
   [10]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-apl2/igt@gem_exec_schedule@u-fairslice@rcs0.html
   [11]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-apl8/igt@gem_exec_schedule@u-fairslice@rcs0.html

  * igt@gem_exec_whisper@basic-contexts-forked:
    - shard-iclb:         [PASS][12] -> [INCOMPLETE][13] ([i915#1895])
   [12]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-iclb3/igt@gem_exec_whisper@basic-contexts-forked.html
   [13]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-iclb7/igt@gem_exec_whisper@basic-contexts-forked.html

  * igt@gem_userptr_blits@process-exit-mmap-busy@uc:
    - shard-skl:          NOTRUN -> [SKIP][14] ([fdo#109271] / [i915#1699]) +3 similar issues
   [14]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-skl10/igt@gem_userptr_blits@process-exit-mmap-busy@uc.html

  * igt@gem_userptr_blits@process-exit-mmap-busy@wc:
    - shard-apl:          NOTRUN -> [SKIP][15] ([fdo#109271] / [i915#1699]) +3 similar issues
   [15]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-apl1/igt@gem_userptr_blits@process-exit-mmap-busy@wc.html

  * igt@i915_pm_lpsp@kms-lpsp@kms-lpsp-dp:
    - shard-apl:          NOTRUN -> [SKIP][16] ([fdo#109271] / [i915#1937])
   [16]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-apl1/igt@i915_pm_lpsp@kms-lpsp@kms-lpsp-dp.html

  * igt@i915_pm_rpm@modeset-lpsp-stress:
    - shard-apl:          NOTRUN -> [SKIP][17] ([fdo#109271]) +75 similar issues
   [17]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-apl1/igt@i915_pm_rpm@modeset-lpsp-stress.html

  * igt@kms_chamelium@hdmi-edid-change-during-suspend:
    - shard-apl:          NOTRUN -> [SKIP][18] ([fdo#109271] / [fdo#111827]) +6 similar issues
   [18]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-apl6/igt@kms_chamelium@hdmi-edid-change-during-suspend.html

  * igt@kms_chamelium@vga-hpd-enable-disable-mode:
    - shard-kbl:          NOTRUN -> [SKIP][19] ([fdo#109271] / [fdo#111827])
   [19]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-kbl7/igt@kms_chamelium@vga-hpd-enable-disable-mode.html

  * igt@kms_color_chamelium@pipe-d-ctm-0-5:
    - shard-tglb:         NOTRUN -> [SKIP][20] ([fdo#109284] / [fdo#111827]) +2 similar issues
   [20]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-tglb6/igt@kms_color_chamelium@pipe-d-ctm-0-5.html

  * igt@kms_cursor_crc@pipe-c-cursor-64x21-random:
    - shard-skl:          [PASS][21] -> [FAIL][22] ([i915#54]) +9 similar issues
   [21]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-skl5/igt@kms_cursor_crc@pipe-c-cursor-64x21-random.html
   [22]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-skl3/igt@kms_cursor_crc@pipe-c-cursor-64x21-random.html

  * igt@kms_dp_tiled_display@basic-test-pattern:
    - shard-tglb:         NOTRUN -> [SKIP][23] ([i915#426])
   [23]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-tglb6/igt@kms_dp_tiled_display@basic-test-pattern.html

  * igt@kms_flip@flip-vs-expired-vblank@a-edp1:
    - shard-tglb:         [PASS][24] -> [FAIL][25] ([i915#2598])
   [24]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-tglb8/igt@kms_flip@flip-vs-expired-vblank@a-edp1.html
   [25]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-tglb1/igt@kms_flip@flip-vs-expired-vblank@a-edp1.html

  * igt@kms_flip@flip-vs-expired-vblank@c-edp1:
    - shard-skl:          [PASS][26] -> [FAIL][27] ([i915#79])
   [26]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-skl3/igt@kms_flip@flip-vs-expired-vblank@c-edp1.html
   [27]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-skl4/igt@kms_flip@flip-vs-expired-vblank@c-edp1.html

  * igt@kms_flip@flip-vs-suspend-interruptible@a-dp1:
    - shard-kbl:          [PASS][28] -> [DMESG-WARN][29] ([i915#180]) +5 similar issues
   [28]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-kbl3/igt@kms_flip@flip-vs-suspend-interruptible@a-dp1.html
   [29]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-kbl1/igt@kms_flip@flip-vs-suspend-interruptible@a-dp1.html

  * igt@kms_flip@flip-vs-suspend@a-dp1:
    - shard-apl:          NOTRUN -> [DMESG-WARN][30] ([i915#180])
   [30]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-apl1/igt@kms_flip@flip-vs-suspend@a-dp1.html

  * igt@kms_flip_scaled_crc@flip-64bpp-ytile-to-32bpp-ytile:
    - shard-kbl:          NOTRUN -> [FAIL][31] ([i915#2641])
   [31]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-kbl7/igt@kms_flip_scaled_crc@flip-64bpp-ytile-to-32bpp-ytile.html

  * igt@kms_frontbuffer_tracking@fbc-2p-primscrn-shrfb-plflip-blt:
    - shard-tglb:         NOTRUN -> [SKIP][32] ([fdo#111825]) +1 similar issue
   [32]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-tglb6/igt@kms_frontbuffer_tracking@fbc-2p-primscrn-shrfb-plflip-blt.html

  * igt@kms_frontbuffer_tracking@fbc-suspend:
    - shard-apl:          [PASS][33] -> [DMESG-WARN][34] ([i915#180]) +1 similar issue
   [33]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-apl6/igt@kms_frontbuffer_tracking@fbc-suspend.html
   [34]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-apl4/igt@kms_frontbuffer_tracking@fbc-suspend.html

  * igt@kms_frontbuffer_tracking@fbcpsr-2p-primscrn-cur-indfb-draw-mmap-wc:
    - shard-kbl:          NOTRUN -> [SKIP][35] ([fdo#109271]) +19 similar issues
   [35]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-kbl7/igt@kms_frontbuffer_tracking@fbcpsr-2p-primscrn-cur-indfb-draw-mmap-wc.html

  * igt@kms_frontbuffer_tracking@psr-1p-primscrn-pri-indfb-draw-mmap-gtt:
    - shard-skl:          [PASS][36] -> [FAIL][37] ([i915#49]) +1 similar issue
   [36]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-skl4/igt@kms_frontbuffer_tracking@psr-1p-primscrn-pri-indfb-draw-mmap-gtt.html
   [37]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-skl9/igt@kms_frontbuffer_tracking@psr-1p-primscrn-pri-indfb-draw-mmap-gtt.html

  * igt@kms_frontbuffer_tracking@psr-2p-primscrn-cur-indfb-draw-mmap-cpu:
    - shard-skl:          NOTRUN -> [SKIP][38] ([fdo#109271]) +5 similar issues
   [38]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-skl10/igt@kms_frontbuffer_tracking@psr-2p-primscrn-cur-indfb-draw-mmap-cpu.html

  * igt@kms_frontbuffer_tracking@psr-suspend:
    - shard-skl:          [PASS][39] -> [INCOMPLETE][40] ([i915#123])
   [39]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-skl9/igt@kms_frontbuffer_tracking@psr-suspend.html
   [40]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-skl6/igt@kms_frontbuffer_tracking@psr-suspend.html

  * igt@kms_hdr@bpc-switch:
    - shard-skl:          [PASS][41] -> [FAIL][42] ([i915#1188])
   [41]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-skl2/igt@kms_hdr@bpc-switch.html
   [42]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-skl9/igt@kms_hdr@bpc-switch.html

  * igt@kms_plane_alpha_blend@pipe-b-alpha-basic:
    - shard-apl:          NOTRUN -> [FAIL][43] ([fdo#108145] / [i915#265])
   [43]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-apl1/igt@kms_plane_alpha_blend@pipe-b-alpha-basic.html

  * igt@kms_plane_alpha_blend@pipe-c-coverage-7efc:
    - shard-skl:          [PASS][44] -> [FAIL][45] ([fdo#108145] / [i915#265]) +1 similar issue
   [44]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-skl7/igt@kms_plane_alpha_blend@pipe-c-coverage-7efc.html
   [45]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-skl2/igt@kms_plane_alpha_blend@pipe-c-coverage-7efc.html

  * igt@kms_psr2_sf@overlay-primary-update-sf-dmg-area-2:
    - shard-apl:          NOTRUN -> [SKIP][46] ([fdo#109271] / [i915#658])
   [46]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-apl6/igt@kms_psr2_sf@overlay-primary-update-sf-dmg-area-2.html

  * igt@kms_psr2_su@frontbuffer:
    - shard-kbl:          NOTRUN -> [SKIP][47] ([fdo#109271] / [i915#658])
   [47]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-kbl7/igt@kms_psr2_su@frontbuffer.html

  * igt@kms_psr2_su@page_flip:
    - shard-iclb:         [PASS][48] -> [SKIP][49] ([fdo#109642] / [fdo#111068] / [i915#658])
   [48]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-iclb2/igt@kms_psr2_su@page_flip.html
   [49]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-iclb6/igt@kms_psr2_su@page_flip.html

  * igt@kms_psr@psr2_no_drrs:
    - shard-iclb:         [PASS][50] -> [SKIP][51] ([fdo#109441]) +1 similar issue
   [50]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-iclb2/igt@kms_psr@psr2_no_drrs.html
   [51]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-iclb4/igt@kms_psr@psr2_no_drrs.html

  * igt@kms_writeback@writeback-invalid-parameters:
    - shard-apl:          NOTRUN -> [SKIP][52] ([fdo#109271] / [i915#2437])
   [52]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-apl6/igt@kms_writeback@writeback-invalid-parameters.html

  * igt@perf@short-reads:
    - shard-skl:          [PASS][53] -> [FAIL][54] ([i915#51])
   [53]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-skl7/igt@perf@short-reads.html
   [54]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-skl2/igt@perf@short-reads.html

  * igt@sysfs_clients@recycle:
    - shard-snb:          [PASS][55] -> [FAIL][56] ([i915#3028])
   [55]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-snb2/igt@sysfs_clients@recycle.html
   [56]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-snb2/igt@sysfs_clients@recycle.html
    - shard-skl:          [PASS][57] -> [FAIL][58] ([i915#3028])
   [57]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-skl2/igt@sysfs_clients@recycle.html
   [58]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-skl8/igt@sysfs_clients@recycle.html
    - shard-tglb:         [PASS][59] -> [FAIL][60] ([i915#3028])
   [59]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-tglb1/igt@sysfs_clients@recycle.html
   [60]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-tglb5/igt@sysfs_clients@recycle.html

  
#### Possible fixes ####

  * igt@gem_eio@in-flight-contexts-1us:
    - shard-tglb:         [TIMEOUT][61] -> [PASS][62]
   [61]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-tglb3/igt@gem_eio@in-flight-contexts-1us.html
   [62]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-tglb6/igt@gem_eio@in-flight-contexts-1us.html

  * igt@gem_eio@in-flight-suspend:
    - shard-apl:          [DMESG-WARN][63] ([i915#1037] / [i915#180]) -> [PASS][64]
   [63]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-apl8/igt@gem_eio@in-flight-suspend.html
   [64]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-apl7/igt@gem_eio@in-flight-suspend.html

  * igt@gem_exec_fair@basic-none-rrul@rcs0:
    - shard-glk:          [FAIL][65] ([i915#2842]) -> [PASS][66]
   [65]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-glk1/igt@gem_exec_fair@basic-none-rrul@rcs0.html
   [66]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-glk5/igt@gem_exec_fair@basic-none-rrul@rcs0.html

  * igt@gem_exec_fair@basic-none@rcs0:
    - shard-kbl:          [FAIL][67] ([i915#2842]) -> [PASS][68]
   [67]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-kbl6/igt@gem_exec_fair@basic-none@rcs0.html
   [68]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-kbl1/igt@gem_exec_fair@basic-none@rcs0.html

  * igt@gem_exec_fair@basic-throttle@rcs0:
    - shard-iclb:         [FAIL][69] ([i915#2849]) -> [PASS][70]
   [69]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-iclb4/igt@gem_exec_fair@basic-throttle@rcs0.html
   [70]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-iclb8/igt@gem_exec_fair@basic-throttle@rcs0.html

  * igt@gem_exec_schedule@u-fairslice@rcs0:
    - shard-kbl:          [DMESG-WARN][71] ([i915#1610] / [i915#2803]) -> [PASS][72]
   [71]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-kbl4/igt@gem_exec_schedule@u-fairslice@rcs0.html
   [72]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-kbl7/igt@gem_exec_schedule@u-fairslice@rcs0.html

  * igt@gem_ppgtt@flink-and-close-vma-leak:
    - shard-glk:          [FAIL][73] ([i915#644]) -> [PASS][74]
   [73]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-glk2/igt@gem_ppgtt@flink-and-close-vma-leak.html
   [74]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-glk4/igt@gem_ppgtt@flink-and-close-vma-leak.html

  * igt@i915_suspend@sysfs-reader:
    - shard-apl:          [DMESG-WARN][75] ([i915#180]) -> [PASS][76] +1 similar issue
   [75]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-apl1/igt@i915_suspend@sysfs-reader.html
   [76]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-apl1/igt@i915_suspend@sysfs-reader.html

  * igt@kms_cursor_crc@pipe-b-cursor-256x85-onscreen:
    - shard-skl:          [FAIL][77] ([i915#54]) -> [PASS][78] +4 similar issues
   [77]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-skl5/igt@kms_cursor_crc@pipe-b-cursor-256x85-onscreen.html
   [78]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-skl3/igt@kms_cursor_crc@pipe-b-cursor-256x85-onscreen.html

  * igt@kms_flip@2x-flip-vs-expired-vblank@ab-hdmi-a1-hdmi-a2:
    - shard-glk:          [FAIL][79] ([i915#79]) -> [PASS][80]
   [79]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-glk9/igt@kms_flip@2x-flip-vs-expired-vblank@ab-hdmi-a1-hdmi-a2.html
   [80]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-glk6/igt@kms_flip@2x-flip-vs-expired-vblank@ab-hdmi-a1-hdmi-a2.html

  * igt@kms_flip@flip-vs-expired-vblank-interruptible@a-edp1:
    - shard-skl:          [FAIL][81] ([i915#79]) -> [PASS][82]
   [81]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-skl2/igt@kms_flip@flip-vs-expired-vblank-interruptible@a-edp1.html
   [82]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-skl6/igt@kms_flip@flip-vs-expired-vblank-interruptible@a-edp1.html

  * igt@kms_flip@plain-flip-fb-recreate@a-edp1:
    - shard-skl:          [FAIL][83] ([i915#2122]) -> [PASS][84]
   [83]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-skl8/igt@kms_flip@plain-flip-fb-recreate@a-edp1.html
   [84]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-skl1/igt@kms_flip@plain-flip-fb-recreate@a-edp1.html

  * igt@kms_frontbuffer_tracking@fbc-1p-offscren-pri-shrfb-draw-render:
    - shard-snb:          [FAIL][85] ([i915#2546]) -> [PASS][86] +13 similar issues
   [85]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-snb5/igt@kms_frontbuffer_tracking@fbc-1p-offscren-pri-shrfb-draw-render.html
   [86]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-snb4/igt@kms_frontbuffer_tracking@fbc-1p-offscren-pri-shrfb-draw-render.html

  * igt@kms_hdr@bpc-switch-suspend:
    - shard-skl:          [FAIL][87] ([i915#1188]) -> [PASS][88]
   [87]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-skl3/igt@kms_hdr@bpc-switch-suspend.html
   [88]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-skl4/igt@kms_hdr@bpc-switch-suspend.html

  * igt@kms_psr2_su@frontbuffer:
    - shard-iclb:         [SKIP][89] ([fdo#109642] / [fdo#111068] / [i915#658]) -> [PASS][90]
   [89]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-iclb4/igt@kms_psr2_su@frontbuffer.html
   [90]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-iclb2/igt@kms_psr2_su@frontbuffer.html

  * igt@kms_psr@psr2_cursor_render:
    - shard-iclb:         [SKIP][91] ([fdo#109441]) -> [PASS][92] +1 similar issue
   [91]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-iclb7/igt@kms_psr@psr2_cursor_render.html
   [92]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-iclb2/igt@kms_psr@psr2_cursor_render.html

  
#### Warnings ####

  * igt@i915_pm_dc@dc3co-vpb-simulation:
    - shard-skl:          [SKIP][93] ([fdo#109271]) -> [SKIP][94] ([fdo#109271] / [i915#658])
   [93]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-skl2/igt@i915_pm_dc@dc3co-vpb-simulation.html
   [94]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-skl6/igt@i915_pm_dc@dc3co-vpb-simulation.html

  * igt@i915_pm_rc6_residency@rc6-fence:
    - shard-iclb:         [WARN][95] ([i915#2684]) -> [WARN][96] ([i915#1804] / [i915#2684])
   [95]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-iclb2/igt@i915_pm_rc6_residency@rc6-fence.html
   [96]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-iclb6/igt@i915_pm_rc6_residency@rc6-fence.html

  * igt@i915_pm_rc6_residency@rc6-idle:
    - shard-iclb:         [WARN][97] ([i915#2681] / [i915#2684]) -> [WARN][98] ([i915#1804] / [i915#2684])
   [97]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-iclb8/igt@i915_pm_rc6_residency@rc6-idle.html
   [98]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-iclb6/igt@i915_pm_rc6_residency@rc6-idle.html

  * igt@kms_psr2_sf@plane-move-sf-dmg-area-0:
    - shard-iclb:         [SKIP][99] ([i915#2920]) -> [SKIP][100] ([i915#658]) +2 similar issues
   [99]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-iclb2/igt@kms_psr2_sf@plane-move-sf-dmg-area-0.html
   [100]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-iclb6/igt@kms_psr2_sf@plane-move-sf-dmg-area-0.html

  * igt@kms_psr2_sf@primary-plane-update-sf-dmg-area-1:
    - shard-iclb:         [SKIP][101] ([i915#658]) -> [SKIP][102] ([i915#2920]) +2 similar issues
   [101]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-iclb4/igt@kms_psr2_sf@primary-plane-update-sf-dmg-area-1.html
   [102]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-iclb2/igt@kms_psr2_sf@primary-plane-update-sf-dmg-area-1.html

  * igt@runner@aborted:
    - shard-kbl:          ([FAIL][103], [FAIL][104], [FAIL][105], [FAIL][106]) ([i915#2295] / [i915#2426] / [i915#2505] / [i915#3002]) -> ([FAIL][107], [FAIL][108], [FAIL][109], [FAIL][110], [FAIL][111], [FAIL][112], [FAIL][113]) ([i915#1814] / [i915#2292] / [i915#2295] / [i915#2505] / [i915#3002])
   [103]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-kbl3/igt@runner@aborted.html
   [104]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-kbl7/igt@runner@aborted.html
   [105]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-kbl4/igt@runner@aborted.html
   [106]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-kbl6/igt@runner@aborted.html
   [107]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-kbl7/igt@runner@aborted.html
   [108]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-kbl2/igt@runner@aborted.html
   [109]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-kbl1/igt@runner@aborted.html
   [110]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-kbl7/igt@runner@aborted.html
   [111]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-kbl6/igt@runner@aborted.html
   [112]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-kbl1/igt@runner@aborted.html
   [113]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-kbl1/igt@runner@aborted.html
    - shard-apl:          ([FAIL][114], [FAIL][115], [FAIL][116], [FAIL][117], [FAIL][118], [FAIL][119], [FAIL][120]) ([i915#1610] / [i915#1814] / [i915#2295] / [i915#3002]) -> ([FAIL][121], [FAIL][122], [FAIL][123], [FAIL][124], [FAIL][125], [FAIL][126], [FAIL][127]) ([fdo#109271] / [i915#1610] / [i915#1814] / [i915#2295] / [i915#2426] / [i915#3002])
   [114]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-apl7/igt@runner@aborted.html
   [115]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-apl3/igt@runner@aborted.html
   [116]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-apl2/igt@runner@aborted.html
   [117]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-apl7/igt@runner@aborted.html
   [118]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-apl1/igt@runner@aborted.html
   [119]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-apl4/igt@runner@aborted.html
   [120]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9747/shard-apl8/igt@runner@aborted.html
   [121]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-apl4/igt@runner@aborted.html
   [122]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-apl8/igt@runner@aborted.html
   [123]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-apl1/igt@runner@aborted.html
   [124]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-apl6/igt@runner@aborted.html
   [125]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-apl8/igt@runner@aborted.html
   [126]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-apl8/igt@runner@aborted.html
   [127]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/shard-apl3/igt@runner@aborted.html

  

### Piglit changes ###

  {name}: This element is suppressed. This means it is ignored when computing
          the status of the difference (SUCCESS, WARNING, or FAILURE).

  [fdo#108145]: https://bugs.freedesktop.org/show_bug.cgi?id=108145
  [fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
  [fdo#109284]: https://bugs.freedesktop.org/show_bug.cgi?id=109284
  [fdo#109441]: https://bugs.freedesktop.org/show_bug.cgi?id=109441
  [fdo#109642]: https://bugs.freedesktop.org/show_bug.cgi?id=109642
  [fdo#111068]: https://bugs.freedesktop.org/show_bug.cgi?id=111068
  [fdo#111825]: https://bugs.freedesktop.org/show_bug.cgi?id=111825
  [fdo#111827]: https://bugs.freedesktop.org/show_bug.cgi?id=111827
  [i915#1037]: https://gitlab.freedesktop.org/drm/intel/issues/1037
  [i915#1188]: https://gitlab.freedesktop.org/drm/intel/issues/1188
  [i915#123]: https://gitlab.freedesktop.org/drm/intel/issues/123
  [i915#1610]: https://gitlab.freedesktop.org/drm/intel/issues/1610
  [i915#1699]: https://gitlab.freedesktop.org/drm/intel/issues/1699
  [i915#180]: https://gitlab.freedesktop.org/drm/intel/issues/180
  [i915#1804]: https://gitlab.freedesktop.org/drm/intel/issues/1804
  [i915#1814]: https://gitlab.freedesktop.org/drm/intel/issues/1814
  [i915#1834]: https://gitlab.freedesktop.org/drm/intel/issues/1834
  [i915#1895]: https://gitlab.freedesktop.org/drm/intel/issues/1895
  [i915#1937]: https://gitlab.freedesktop.org/drm/intel/issues/1937
  [i915#2122]: https://gitlab.freedesktop.org/drm/intel/issues/2122
  [i915#2292]: https://gitlab.freedesktop.org/drm/intel/issues/2292
  [i915#2295]: https://gitlab.freedesktop.org/drm/intel/issues/2295
  [i915#2389]: https://gitlab.freedesktop.org/drm/intel/issues/2389
  [i915#2426]: https://gitlab.freedesktop.org/drm/intel/issues/2426
  [i915#2437]: https://gitlab.freedesktop.org/drm/intel/issues/2437
  [i915#2505]: https://gitlab.freedesktop.org/drm/intel/issues/2505
  [i915#2546]: https://gitlab.freedesktop.org/drm/intel/issues/2546
  [i915#2598]: https://gitlab.freedesktop.org/drm/intel/issues/2598
  [i915#2641]: https://gitlab.freedesktop.org/drm/intel/issues/2641
  [i915#265]: https://gitlab.freedesktop.org/drm/intel/issues/265
  [i915#2681]: https://gitlab.freedesktop.org/drm/intel/issues/2681
  [i915#2684]: https://gitlab.freedesktop.org/drm/intel/issues/2684
  [i915#2771]: https://gitlab.freedesktop.org/drm/intel/issues/2771
  [i915#2803]: https://gitlab.freedesktop.org/drm/intel/issues/2803
  [i915#2842]: https://gitlab.freedesktop.org/drm/intel/issues/2842
  [i915#2849]: https://gitlab.freedesktop.org/drm/intel/issues/2849
  [i915#2920]: https://gitlab.freedesktop.org/drm/intel/issues/2920
  [i915#3002]: https://gitlab.freedesktop.org/drm/intel/issues/3002
  [i915#3028]: https://gitlab.freedesktop.org/drm/intel/issues/3028
  [i915#3045]: https://gitlab.freedesktop.org/drm/intel/issues/3045
  [i915#426]: https://gitlab.freedesktop.org/drm/intel/issues/426
  [i915#49]: https://gitlab.freedesktop.org/drm/intel/issues/49
  [i915#51]: https://gitlab.freedesktop.org/drm/intel/issues/51
  [i915#54]: https://gitlab.freedesktop.org/drm/intel/issues/54
  [i915#644]: https://gitlab.freedesktop.org/drm/intel/issues/644
  [i915#658]: https://gitlab.freedesktop.org/drm/intel/issues/658
  [i915#79]: https://gitlab.freedesktop.org/drm/intel/issues/79


Participating hosts (11 -> 12)
------------------------------

  Additional (1): pig-icl-1065g7 


Build changes
-------------

  * Linux: CI_DRM_9747 -> Patchwork_19637

  CI-20190529: 20190529
  CI_DRM_9747: 65d67e70f9f78c7f8c2796956fdbdb69cffc7c98 @ git://anongit.freedesktop.org/gfx-ci/linux
  IGT_5998: b0160aad9e547d2205341e0b6783e12aa143566e @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
  Patchwork_19637: 17d615fa2b9d9c37493ff55c2868a9bf5e40db1e @ git://anongit.freedesktop.org/gfx-ci/linux
  piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_19637/index.html

[-- Attachment #1.2: Type: text/html, Size: 33804 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx