[PATCH] usb: dwc3: gadget: Clear DEP flags after stop transfers in ep disable

[PATCH] usb: dwc3: gadget: Clear DEP flags after stop transfers in ep disable

[Wesley Cheng]

Ensure that dep->flags are cleared until after stop active transfers
is completed.  Otherwise, the ENDXFER command will not be executed
during ep disable.

Fixes: f09ddcfcb8c5 ("usb: dwc3: gadget: Prevent EP queuing while stopping transfers")
Reported-and-tested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
---
 drivers/usb/dwc3/gadget.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index e1442fc..2c4d201 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -791,10 +791,6 @@ static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep)
 	reg &= ~DWC3_DALEPENA_EP(dep->number);
 	dwc3_writel(dwc->regs, DWC3_DALEPENA, reg);
 
-	dep->stream_capable = false;
-	dep->type = 0;
-	dep->flags = 0;
-
 	/* Clear out the ep descriptors for non-ep0 */
 	if (dep->number > 1) {
 		dep->endpoint.comp_desc = NULL;
@@ -803,6 +799,10 @@ static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep)
 
 	dwc3_remove_requests(dwc, dep);
 
+	dep->stream_capable = false;
+	dep->type = 0;
+	dep->flags = 0;
+
 	return 0;
 }
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project