* [PATCH 0/5] Samsung Galaxy S III Neo Initial DTS
@ 2021-03-26 14:58 Bartosz Dudziak
2021-03-26 14:58 ` [PATCH 1/5] dt-bindings: clock: qcom: Add MSM8226 GCC clock bindings Bartosz Dudziak
` (5 more replies)
0 siblings, 6 replies; 14+ messages in thread
From: Bartosz Dudziak @ 2021-03-26 14:58 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Michael Turquette, Stephen Boyd,
Rob Herring, linux-clk, linux-arm-msm, linux-kernel, devicetree
Cc: Bartosz Dudziak
This series of patches enables to boot MSM8226 SoC in Samsung Galaxy S III Neo
mobile phone. Implemented clocks are on top of MSM8974 GCC driver because there
is really little difference between them. UART serial communication is working.
I have working patches for the regulators, EMMC, multithreading and Wifi for
this device but they are not clean and ready to submit.
Bartosz Dudziak (5):
dt-bindings: clock: qcom: Add MSM8226 GCC clock bindings
clk: qcom: gcc: Add support for Global Clock controller found on
MSM8226
arm: dts: qcom: Add support for MSM8226 SoC
dt-bindings: arm: qcom: Document MSM8226 SoC binding
arm: dts: qcom: Add initial DTS file for Samsung Galaxy S III Neo
phone
.../devicetree/bindings/arm/qcom.yaml | 6 +
.../devicetree/bindings/clock/qcom,gcc.yaml | 13 +-
arch/arm/boot/dts/Makefile | 1 +
.../boot/dts/qcom-msm8226-samsung-s3ve3g.dts | 25 +++
arch/arm/boot/dts/qcom-msm8226.dtsi | 152 ++++++++++++++
drivers/clk/qcom/gcc-msm8974.c | 185 ++++++++++++++++--
6 files changed, 364 insertions(+), 18 deletions(-)
create mode 100644 arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts
create mode 100644 arch/arm/boot/dts/qcom-msm8226.dtsi
--
2.25.1
^ permalink raw reply [flat|nested] 14+ messages in thread* [PATCH 1/5] dt-bindings: clock: qcom: Add MSM8226 GCC clock bindings 2021-03-26 14:58 [PATCH 0/5] Samsung Galaxy S III Neo Initial DTS Bartosz Dudziak @ 2021-03-26 14:58 ` Bartosz Dudziak 2021-03-27 18:40 ` Rob Herring 2021-03-26 14:58 ` [PATCH 2/5] clk: qcom: gcc: Add support for Global Clock controller found on MSM8226 Bartosz Dudziak ` (4 subsequent siblings) 5 siblings, 1 reply; 14+ messages in thread From: Bartosz Dudziak @ 2021-03-26 14:58 UTC (permalink / raw) To: Andy Gross, Bjorn Andersson, Michael Turquette, Stephen Boyd, Rob Herring, linux-clk, linux-arm-msm, linux-kernel, devicetree Cc: Bartosz Dudziak Add compatible device strings and the include files for the MSM8226 GCC. Also add missing includes for MSM8916 and MSM8960 SoCs. Signed-off-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl> --- .../devicetree/bindings/clock/qcom,gcc.yaml | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml index ee0467fb5e..1f609b40c2 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml @@ -22,12 +22,16 @@ description: | - dt-bindings/reset/qcom,gcc-ipq6018.h - dt-bindings/clock/qcom,gcc-ipq806x.h (qcom,gcc-ipq8064) - dt-bindings/reset/qcom,gcc-ipq806x.h (qcom,gcc-ipq8064) - - dt-bindings/clock/qcom,gcc-msm8939.h - - dt-bindings/reset/qcom,gcc-msm8939.h - dt-bindings/clock/qcom,gcc-msm8660.h - dt-bindings/reset/qcom,gcc-msm8660.h - - dt-bindings/clock/qcom,gcc-msm8974.h - - dt-bindings/reset/qcom,gcc-msm8974.h + - dt-bindings/clock/qcom,gcc-msm8916.h + - dt-bindings/reset/qcom,gcc-msm8916.h + - dt-bindings/clock/qcom,gcc-msm8939.h + - dt-bindings/reset/qcom,gcc-msm8939.h + - dt-bindings/clock/qcom,gcc-msm8960.h + - dt-bindings/reset/qcom,gcc-msm8960.h + - dt-bindings/clock/qcom,gcc-msm8974.h (qcom,gcc-msm8226 and qcom,gcc-msm8974) + - dt-bindings/reset/qcom,gcc-msm8974.h (qcom,gcc-msm8226 and qcom,gcc-msm8974) - dt-bindings/clock/qcom,gcc-msm8994.h - dt-bindings/clock/qcom,gcc-mdm9615.h - dt-bindings/reset/qcom,gcc-mdm9615.h @@ -41,6 +45,7 @@ properties: - qcom,gcc-ipq4019 - qcom,gcc-ipq6018 - qcom,gcc-ipq8064 + - qcom,gcc-msm8226 - qcom,gcc-msm8660 - qcom,gcc-msm8916 - qcom,gcc-msm8939 -- 2.25.1 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [PATCH 1/5] dt-bindings: clock: qcom: Add MSM8226 GCC clock bindings 2021-03-26 14:58 ` [PATCH 1/5] dt-bindings: clock: qcom: Add MSM8226 GCC clock bindings Bartosz Dudziak @ 2021-03-27 18:40 ` Rob Herring 0 siblings, 0 replies; 14+ messages in thread From: Rob Herring @ 2021-03-27 18:40 UTC (permalink / raw) To: Bartosz Dudziak Cc: Bjorn Andersson, Michael Turquette, Stephen Boyd, Andy Gross, linux-kernel, linux-clk, linux-arm-msm, devicetree, Rob Herring On Fri, 26 Mar 2021 15:58:12 +0100, Bartosz Dudziak wrote: > Add compatible device strings and the include files for the MSM8226 GCC. > Also add missing includes for MSM8916 and MSM8960 SoCs. > > Signed-off-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl> > --- > .../devicetree/bindings/clock/qcom,gcc.yaml | 13 +++++++++---- > 1 file changed, 9 insertions(+), 4 deletions(-) > Acked-by: Rob Herring <robh@kernel.org> ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 2/5] clk: qcom: gcc: Add support for Global Clock controller found on MSM8226 2021-03-26 14:58 [PATCH 0/5] Samsung Galaxy S III Neo Initial DTS Bartosz Dudziak 2021-03-26 14:58 ` [PATCH 1/5] dt-bindings: clock: qcom: Add MSM8226 GCC clock bindings Bartosz Dudziak @ 2021-03-26 14:58 ` Bartosz Dudziak 2021-03-26 18:23 ` Stephen Boyd 2021-03-26 14:58 ` [PATCH 3/5] arm: dts: qcom: Add support for MSM8226 SoC Bartosz Dudziak ` (3 subsequent siblings) 5 siblings, 1 reply; 14+ messages in thread From: Bartosz Dudziak @ 2021-03-26 14:58 UTC (permalink / raw) To: Andy Gross, Bjorn Andersson, Michael Turquette, Stephen Boyd, Rob Herring, linux-clk, linux-arm-msm, linux-kernel, devicetree Cc: Bartosz Dudziak Modify existing MSM8974 driver to support MSM8226 SoC. Override frequencies which are different in this older chip. Register all the clocks to the framework for the clients to be able to request for them. Signed-off-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl> --- drivers/clk/qcom/gcc-msm8974.c | 185 ++++++++++++++++++++++++++++++--- 1 file changed, 171 insertions(+), 14 deletions(-) diff --git a/drivers/clk/qcom/gcc-msm8974.c b/drivers/clk/qcom/gcc-msm8974.c index 740d3c44c0..06cd669e10 100644 --- a/drivers/clk/qcom/gcc-msm8974.c +++ b/drivers/clk/qcom/gcc-msm8974.c @@ -3,16 +3,13 @@ * Copyright (c) 2013, The Linux Foundation. All rights reserved. */ -#include <linux/kernel.h> -#include <linux/bitops.h> +#include <linux/clk-provider.h> #include <linux/err.h> -#include <linux/platform_device.h> +#include <linux/kernel.h> #include <linux/module.h> -#include <linux/of.h> #include <linux/of_device.h> -#include <linux/clk-provider.h> +#include <linux/of.h> #include <linux/regmap.h> -#include <linux/reset-controller.h> #include <dt-bindings/clock/qcom,gcc-msm8974.h> #include <dt-bindings/reset/qcom,gcc-msm8974.h> @@ -719,6 +716,12 @@ static struct clk_rcg2 blsp2_uart6_apps_clk_src = { }, }; +static const struct freq_tbl ftbl_gcc_ce1_clk_msm8226[] = { + F(50000000, P_GPLL0, 12, 0, 0), + F(100000000, P_GPLL0, 6, 0, 0), + { } +}; + static const struct freq_tbl ftbl_gcc_ce1_clk[] = { F(50000000, P_GPLL0, 12, 0, 0), F(75000000, P_GPLL0, 8, 0, 0), @@ -761,6 +764,11 @@ static struct clk_rcg2 ce2_clk_src = { }, }; +static const struct freq_tbl ftbl_gcc_gp_clk_msm8226[] = { + F(19200000, P_XO, 1, 0, 0), + { } +}; + static const struct freq_tbl ftbl_gcc_gp_clk[] = { F(4800000, P_XO, 4, 0, 0), F(6000000, P_GPLL0, 10, 1, 10), @@ -1955,6 +1963,10 @@ static struct clk_branch gcc_mss_q6_bimc_axi_clk = { .enable_mask = BIT(0), .hw.init = &(struct clk_init_data){ .name = "gcc_mss_q6_bimc_axi_clk", + .parent_names = (const char *[]){ + "system_noc_clk_src", + }, + .num_parents = 1, .ops = &clk_branch2_ops, }, }, @@ -1993,6 +2005,20 @@ static struct clk_branch gcc_pdm_ahb_clk = { }, }; +static struct clk_branch gcc_pdm_xo4_clk = { + .halt_reg = 0x0cc8, + .clkr = { + .enable_reg = 0x0cc8, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pdm_xo4_clk", + .parent_names = (const char *[]){ "xo" }, + .num_parents = 1, + .ops = &clk_branch2_ops, + }, + }, +}; + static struct clk_branch gcc_prng_ahb_clk = { .halt_reg = 0x0d04, .halt_check = BRANCH_HALT_VOTED, @@ -2430,6 +2456,121 @@ static struct gdsc usb_hs_hsic_gdsc = { .pwrsts = PWRSTS_OFF_ON, }; +static struct clk_regmap *gcc_msm8226_clocks[] = { + [GPLL0] = &gpll0.clkr, + [GPLL0_VOTE] = &gpll0_vote, + [GPLL1] = &gpll1.clkr, + [GPLL1_VOTE] = &gpll1_vote, + [CONFIG_NOC_CLK_SRC] = &config_noc_clk_src.clkr, + [PERIPH_NOC_CLK_SRC] = &periph_noc_clk_src.clkr, + [SYSTEM_NOC_CLK_SRC] = &system_noc_clk_src.clkr, + [BLSP1_QUP1_I2C_APPS_CLK_SRC] = &blsp1_qup1_i2c_apps_clk_src.clkr, + [BLSP1_QUP1_SPI_APPS_CLK_SRC] = &blsp1_qup1_spi_apps_clk_src.clkr, + [BLSP1_QUP2_I2C_APPS_CLK_SRC] = &blsp1_qup2_i2c_apps_clk_src.clkr, + [BLSP1_QUP2_SPI_APPS_CLK_SRC] = &blsp1_qup2_spi_apps_clk_src.clkr, + [BLSP1_QUP3_I2C_APPS_CLK_SRC] = &blsp1_qup3_i2c_apps_clk_src.clkr, + [BLSP1_QUP3_SPI_APPS_CLK_SRC] = &blsp1_qup3_spi_apps_clk_src.clkr, + [BLSP1_QUP4_I2C_APPS_CLK_SRC] = &blsp1_qup4_i2c_apps_clk_src.clkr, + [BLSP1_QUP4_SPI_APPS_CLK_SRC] = &blsp1_qup4_spi_apps_clk_src.clkr, + [BLSP1_QUP5_I2C_APPS_CLK_SRC] = &blsp1_qup5_i2c_apps_clk_src.clkr, + [BLSP1_QUP5_SPI_APPS_CLK_SRC] = &blsp1_qup5_spi_apps_clk_src.clkr, + [BLSP1_QUP6_I2C_APPS_CLK_SRC] = &blsp1_qup6_i2c_apps_clk_src.clkr, + [BLSP1_QUP6_SPI_APPS_CLK_SRC] = &blsp1_qup6_spi_apps_clk_src.clkr, + [BLSP1_UART1_APPS_CLK_SRC] = &blsp1_uart1_apps_clk_src.clkr, + [BLSP1_UART2_APPS_CLK_SRC] = &blsp1_uart2_apps_clk_src.clkr, + [BLSP1_UART3_APPS_CLK_SRC] = &blsp1_uart3_apps_clk_src.clkr, + [BLSP1_UART4_APPS_CLK_SRC] = &blsp1_uart4_apps_clk_src.clkr, + [BLSP1_UART5_APPS_CLK_SRC] = &blsp1_uart5_apps_clk_src.clkr, + [BLSP1_UART6_APPS_CLK_SRC] = &blsp1_uart6_apps_clk_src.clkr, + [CE1_CLK_SRC] = &ce1_clk_src.clkr, + [GP1_CLK_SRC] = &gp1_clk_src.clkr, + [GP2_CLK_SRC] = &gp2_clk_src.clkr, + [GP3_CLK_SRC] = &gp3_clk_src.clkr, + [PDM2_CLK_SRC] = &pdm2_clk_src.clkr, + [SDCC1_APPS_CLK_SRC] = &sdcc1_apps_clk_src.clkr, + [SDCC2_APPS_CLK_SRC] = &sdcc2_apps_clk_src.clkr, + [SDCC3_APPS_CLK_SRC] = &sdcc3_apps_clk_src.clkr, + [USB_HS_SYSTEM_CLK_SRC] = &usb_hs_system_clk_src.clkr, + [USB_HSIC_CLK_SRC] = &usb_hsic_clk_src.clkr, + [USB_HSIC_IO_CAL_CLK_SRC] = &usb_hsic_io_cal_clk_src.clkr, + [USB_HSIC_SYSTEM_CLK_SRC] = &usb_hsic_system_clk_src.clkr, + [GCC_BAM_DMA_AHB_CLK] = &gcc_bam_dma_ahb_clk.clkr, + [GCC_BLSP1_AHB_CLK] = &gcc_blsp1_ahb_clk.clkr, + [GCC_BLSP1_QUP1_I2C_APPS_CLK] = &gcc_blsp1_qup1_i2c_apps_clk.clkr, + [GCC_BLSP1_QUP1_SPI_APPS_CLK] = &gcc_blsp1_qup1_spi_apps_clk.clkr, + [GCC_BLSP1_QUP2_I2C_APPS_CLK] = &gcc_blsp1_qup2_i2c_apps_clk.clkr, + [GCC_BLSP1_QUP2_SPI_APPS_CLK] = &gcc_blsp1_qup2_spi_apps_clk.clkr, + [GCC_BLSP1_QUP3_I2C_APPS_CLK] = &gcc_blsp1_qup3_i2c_apps_clk.clkr, + [GCC_BLSP1_QUP3_SPI_APPS_CLK] = &gcc_blsp1_qup3_spi_apps_clk.clkr, + [GCC_BLSP1_QUP4_I2C_APPS_CLK] = &gcc_blsp1_qup4_i2c_apps_clk.clkr, + [GCC_BLSP1_QUP4_SPI_APPS_CLK] = &gcc_blsp1_qup4_spi_apps_clk.clkr, + [GCC_BLSP1_QUP5_I2C_APPS_CLK] = &gcc_blsp1_qup5_i2c_apps_clk.clkr, + [GCC_BLSP1_QUP5_SPI_APPS_CLK] = &gcc_blsp1_qup5_spi_apps_clk.clkr, + [GCC_BLSP1_QUP6_I2C_APPS_CLK] = &gcc_blsp1_qup6_i2c_apps_clk.clkr, + [GCC_BLSP1_QUP6_SPI_APPS_CLK] = &gcc_blsp1_qup6_spi_apps_clk.clkr, + [GCC_BLSP1_UART1_APPS_CLK] = &gcc_blsp1_uart1_apps_clk.clkr, + [GCC_BLSP1_UART2_APPS_CLK] = &gcc_blsp1_uart2_apps_clk.clkr, + [GCC_BLSP1_UART3_APPS_CLK] = &gcc_blsp1_uart3_apps_clk.clkr, + [GCC_BLSP1_UART4_APPS_CLK] = &gcc_blsp1_uart4_apps_clk.clkr, + [GCC_BLSP1_UART5_APPS_CLK] = &gcc_blsp1_uart5_apps_clk.clkr, + [GCC_BLSP1_UART6_APPS_CLK] = &gcc_blsp1_uart6_apps_clk.clkr, + [GCC_BOOT_ROM_AHB_CLK] = &gcc_boot_rom_ahb_clk.clkr, + [GCC_CE1_AHB_CLK] = &gcc_ce1_ahb_clk.clkr, + [GCC_CE1_AXI_CLK] = &gcc_ce1_axi_clk.clkr, + [GCC_CE1_CLK] = &gcc_ce1_clk.clkr, + [GCC_GP1_CLK] = &gcc_gp1_clk.clkr, + [GCC_GP2_CLK] = &gcc_gp2_clk.clkr, + [GCC_GP3_CLK] = &gcc_gp3_clk.clkr, + [GCC_LPASS_Q6_AXI_CLK] = &gcc_lpass_q6_axi_clk.clkr, + [GCC_MSS_CFG_AHB_CLK] = &gcc_mss_cfg_ahb_clk.clkr, + [GCC_MSS_Q6_BIMC_AXI_CLK] = &gcc_mss_q6_bimc_axi_clk.clkr, + [GCC_PDM2_CLK] = &gcc_pdm2_clk.clkr, + [GCC_PDM_AHB_CLK] = &gcc_pdm_ahb_clk.clkr, + [GCC_PDM_XO4_CLK] = &gcc_pdm_xo4_clk.clkr, + [GCC_PRNG_AHB_CLK] = &gcc_prng_ahb_clk.clkr, + [GCC_SDCC1_AHB_CLK] = &gcc_sdcc1_ahb_clk.clkr, + [GCC_SDCC1_APPS_CLK] = &gcc_sdcc1_apps_clk.clkr, + [GCC_SDCC2_AHB_CLK] = &gcc_sdcc2_ahb_clk.clkr, + [GCC_SDCC2_APPS_CLK] = &gcc_sdcc2_apps_clk.clkr, + [GCC_SDCC3_AHB_CLK] = &gcc_sdcc3_ahb_clk.clkr, + [GCC_SDCC3_APPS_CLK] = &gcc_sdcc3_apps_clk.clkr, + [GCC_USB2A_PHY_SLEEP_CLK] = &gcc_usb2a_phy_sleep_clk.clkr, + [GCC_USB_HS_AHB_CLK] = &gcc_usb_hs_ahb_clk.clkr, + [GCC_USB_HS_SYSTEM_CLK] = &gcc_usb_hs_system_clk.clkr, + [GCC_USB_HSIC_AHB_CLK] = &gcc_usb_hsic_ahb_clk.clkr, + [GCC_USB_HSIC_CLK] = &gcc_usb_hsic_clk.clkr, + [GCC_USB_HSIC_IO_CAL_CLK] = &gcc_usb_hsic_io_cal_clk.clkr, + [GCC_USB_HSIC_SYSTEM_CLK] = &gcc_usb_hsic_system_clk.clkr, +}; + +static const struct qcom_reset_map gcc_msm8226_resets[] = { + [GCC_USB_HS_HSIC_BCR] = { 0x0400 }, + [GCC_USB_HS_BCR] = { 0x0480 }, + [GCC_USB2A_PHY_BCR] = { 0x04a8 }, +}; + +static struct gdsc *gcc_msm8226_gdscs[] = { + [USB_HS_HSIC_GDSC] = &usb_hs_hsic_gdsc, +}; + +static const struct regmap_config gcc_msm8226_regmap_config = { + .reg_bits = 32, + .reg_stride = 4, + .val_bits = 32, + .max_register = 0x1a80, + .fast_io = true, +}; + +static const struct qcom_cc_desc gcc_msm8226_desc = { + .config = &gcc_msm8226_regmap_config, + .clks = gcc_msm8226_clocks, + .num_clks = ARRAY_SIZE(gcc_msm8226_clocks), + .resets = gcc_msm8226_resets, + .num_resets = ARRAY_SIZE(gcc_msm8226_resets), + .gdscs = gcc_msm8226_gdscs, + .num_gdscs = ARRAY_SIZE(gcc_msm8226_gdscs), +}; + static struct clk_regmap *gcc_msm8974_clocks[] = { [GPLL0] = &gpll0.clkr, [GPLL0_VOTE] = &gpll0_vote, @@ -2682,13 +2823,22 @@ static const struct qcom_cc_desc gcc_msm8974_desc = { }; static const struct of_device_id gcc_msm8974_match_table[] = { - { .compatible = "qcom,gcc-msm8974" }, - { .compatible = "qcom,gcc-msm8974pro" , .data = (void *)1UL }, - { .compatible = "qcom,gcc-msm8974pro-ac", .data = (void *)1UL }, + { .compatible = "qcom,gcc-msm8226", .data = &gcc_msm8226_desc }, + { .compatible = "qcom,gcc-msm8974", .data = &gcc_msm8974_desc }, + { .compatible = "qcom,gcc-msm8974pro", .data = &gcc_msm8974_desc }, + { .compatible = "qcom,gcc-msm8974pro-ac", .data = &gcc_msm8974_desc }, { } }; MODULE_DEVICE_TABLE(of, gcc_msm8974_match_table); +static void msm8226_clock_override(void) +{ + ce1_clk_src.freq_tbl = ftbl_gcc_ce1_clk_msm8226; + gp1_clk_src.freq_tbl = ftbl_gcc_gp_clk_msm8226; + gp2_clk_src.freq_tbl = ftbl_gcc_gp_clk_msm8226; + gp3_clk_src.freq_tbl = ftbl_gcc_gp_clk_msm8226; +} + static void msm8974_pro_clock_override(void) { sdcc1_apps_clk_src_init.parent_names = gcc_xo_gpll0_gpll4; @@ -2708,16 +2858,19 @@ static int gcc_msm8974_probe(struct platform_device *pdev) { int ret; struct device *dev = &pdev->dev; - bool pro; + struct regmap *regmap; const struct of_device_id *id; id = of_match_device(gcc_msm8974_match_table, dev); if (!id) return -ENODEV; - pro = !!(id->data); - if (pro) - msm8974_pro_clock_override(); + if (!of_device_is_compatible(dev->of_node, "qcom,gcc-msm8974")) { + if (id->data == &gcc_msm8226_desc) + msm8226_clock_override(); + else + msm8974_pro_clock_override(); + } ret = qcom_cc_register_board_clk(dev, "xo_board", "xo", 19200000); if (ret) @@ -2727,7 +2880,11 @@ static int gcc_msm8974_probe(struct platform_device *pdev) if (ret) return ret; - return qcom_cc_probe(pdev, &gcc_msm8974_desc); + regmap = qcom_cc_map(pdev, id->data); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + return qcom_cc_really_probe(pdev, id->data, regmap); } static struct platform_driver gcc_msm8974_driver = { -- 2.25.1 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [PATCH 2/5] clk: qcom: gcc: Add support for Global Clock controller found on MSM8226 2021-03-26 14:58 ` [PATCH 2/5] clk: qcom: gcc: Add support for Global Clock controller found on MSM8226 Bartosz Dudziak @ 2021-03-26 18:23 ` Stephen Boyd 0 siblings, 0 replies; 14+ messages in thread From: Stephen Boyd @ 2021-03-26 18:23 UTC (permalink / raw) To: Andy Gross, Bartosz Dudziak, Bjorn Andersson, Michael Turquette, Rob Herring, devicetree, linux-arm-msm, linux-clk, linux-kernel Cc: Bartosz Dudziak Quoting Bartosz Dudziak (2021-03-26 07:58:13) > Modify existing MSM8974 driver to support MSM8226 SoC. Override frequencies > which are different in this older chip. Register all the clocks to the > framework for the clients to be able to request for them. Alphabet sort includes? Preferably do that in a different patch. > > Signed-off-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl> > --- > drivers/clk/qcom/gcc-msm8974.c | 185 ++++++++++++++++++++++++++++++--- > 1 file changed, 171 insertions(+), 14 deletions(-) > > diff --git a/drivers/clk/qcom/gcc-msm8974.c b/drivers/clk/qcom/gcc-msm8974.c > index 740d3c44c0..06cd669e10 100644 > --- a/drivers/clk/qcom/gcc-msm8974.c > +++ b/drivers/clk/qcom/gcc-msm8974.c > @@ -3,16 +3,13 @@ > * Copyright (c) 2013, The Linux Foundation. All rights reserved. > */ > > -#include <linux/kernel.h> > -#include <linux/bitops.h> > +#include <linux/clk-provider.h> > #include <linux/err.h> > -#include <linux/platform_device.h> > +#include <linux/kernel.h> > #include <linux/module.h> > -#include <linux/of.h> > #include <linux/of_device.h> > -#include <linux/clk-provider.h> > +#include <linux/of.h> > #include <linux/regmap.h> > -#include <linux/reset-controller.h> > > #include <dt-bindings/clock/qcom,gcc-msm8974.h> > #include <dt-bindings/reset/qcom,gcc-msm8974.h> > @@ -2727,7 +2880,11 @@ static int gcc_msm8974_probe(struct platform_device *pdev) > if (ret) > return ret; > > - return qcom_cc_probe(pdev, &gcc_msm8974_desc); > + regmap = qcom_cc_map(pdev, id->data); > + if (IS_ERR(regmap)) > + return PTR_ERR(regmap); > + > + return qcom_cc_really_probe(pdev, id->data, regmap); Is this doing anything? I think qcom_cc_probe(pdev, id->data) should work? ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 3/5] arm: dts: qcom: Add support for MSM8226 SoC 2021-03-26 14:58 [PATCH 0/5] Samsung Galaxy S III Neo Initial DTS Bartosz Dudziak 2021-03-26 14:58 ` [PATCH 1/5] dt-bindings: clock: qcom: Add MSM8226 GCC clock bindings Bartosz Dudziak 2021-03-26 14:58 ` [PATCH 2/5] clk: qcom: gcc: Add support for Global Clock controller found on MSM8226 Bartosz Dudziak @ 2021-03-26 14:58 ` Bartosz Dudziak 2021-03-26 18:21 ` Stephen Boyd 2021-03-30 3:41 ` Bjorn Andersson 2021-03-26 14:58 ` [PATCH 4/5] dt-bindings: arm: qcom: Document MSM8226 SoC binding Bartosz Dudziak ` (2 subsequent siblings) 5 siblings, 2 replies; 14+ messages in thread From: Bartosz Dudziak @ 2021-03-26 14:58 UTC (permalink / raw) To: Andy Gross, Bjorn Andersson, Michael Turquette, Stephen Boyd, Rob Herring, linux-clk, linux-arm-msm, linux-kernel, devicetree Cc: Bartosz Dudziak This patch adds basic device tree support for MSM8226 SoC which belongs to the Snapdragon 400 family. For now, this file adds the basic nodes like gcc, pinctrl and other required configuration for booting up to the serial console. Signed-off-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl> --- arch/arm/boot/dts/qcom-msm8226.dtsi | 152 ++++++++++++++++++++++++++++ 1 file changed, 152 insertions(+) create mode 100644 arch/arm/boot/dts/qcom-msm8226.dtsi diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom-msm8226.dtsi new file mode 100644 index 0000000000..81bb19398e --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8226.dtsi @@ -0,0 +1,152 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,gcc-msm8974.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "Qualcomm Technologies, Inc. MSM8226"; + compatible = "qcom,msm8226"; + interrupt-parent = <&intc>; + + chosen { }; + + memory { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x0>; + }; + + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; + + intc: interrupt-controller@f9000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0xF9000000 0x1000>, + <0xF9002000 0x1000>; + }; + + gcc: clock-controller@fc400000 { + compatible = "qcom,gcc-msm8226"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0xfc400000 0x4000>; + }; + + msmgpio: pinctrl@fd510000 { + compatible = "qcom,msm8226-pinctrl"; + reg = <0xfd510000 0x4000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&msmgpio 0 0 117>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + }; + + blsp1_uart3: serial@f991f000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf991f000 0x1000>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + restart@fc4ab000 { + compatible = "qcom,pshold"; + reg = <0xfc4ab000 0x4>; + }; + + rng@f9bff000 { + compatible = "qcom,prng"; + reg = <0xf9bff000 0x200>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + + timer@f9020000 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0xf9020000 0x1000>; + clock-frequency = <19200000>; + + frame@f9021000 { + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9021000 0x1000>, + <0xf9022000 0x1000>; + }; + + frame@f9023000 { + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9023000 0x1000>; + status = "disabled"; + }; + + frame@f9024000 { + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9024000 0x1000>; + status = "disabled"; + }; + + frame@f9025000 { + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9025000 0x1000>; + status = "disabled"; + }; + + frame@f9026000 { + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9026000 0x1000>; + status = "disabled"; + }; + + frame@f9027000 { + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9027000 0x1000>; + status = "disabled"; + }; + + frame@f9028000 { + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9028000 0x1000>; + status = "disabled"; + }; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 2 + (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 + (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 + (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 + (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <19200000>; + }; +}; -- 2.25.1 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [PATCH 3/5] arm: dts: qcom: Add support for MSM8226 SoC 2021-03-26 14:58 ` [PATCH 3/5] arm: dts: qcom: Add support for MSM8226 SoC Bartosz Dudziak @ 2021-03-26 18:21 ` Stephen Boyd 2021-03-30 3:41 ` Bjorn Andersson 1 sibling, 0 replies; 14+ messages in thread From: Stephen Boyd @ 2021-03-26 18:21 UTC (permalink / raw) To: Andy Gross, Bartosz Dudziak, Bjorn Andersson, Michael Turquette, Rob Herring, devicetree, linux-arm-msm, linux-clk, linux-kernel Cc: Bartosz Dudziak Quoting Bartosz Dudziak (2021-03-26 07:58:14) > This patch adds basic device tree support for MSM8226 SoC which belongs git grep "This patch" -- Documentation/process/submitting-patches.rst > to the Snapdragon 400 family. For now, this file adds the basic nodes > like gcc, pinctrl and other required configuration for booting up to > the serial console. > > Signed-off-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl> > --- > arch/arm/boot/dts/qcom-msm8226.dtsi | 152 ++++++++++++++++++++++++++++ > 1 file changed, 152 insertions(+) > create mode 100644 arch/arm/boot/dts/qcom-msm8226.dtsi > > diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom-msm8226.dtsi > new file mode 100644 > index 0000000000..81bb19398e > --- /dev/null > +++ b/arch/arm/boot/dts/qcom-msm8226.dtsi > @@ -0,0 +1,152 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (c) 2020, The Linux Foundation. All rights reserved. > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/interrupt-controller/arm-gic.h> > +#include <dt-bindings/clock/qcom,gcc-msm8974.h> > + > +/ { > + #address-cells = <1>; > + #size-cells = <1>; > + model = "Qualcomm Technologies, Inc. MSM8226"; > + compatible = "qcom,msm8226"; > + interrupt-parent = <&intc>; > + > + chosen { }; > + > + memory { > + device_type = "memory"; > + /* We expect the bootloader to fill in the size */ > + reg = <0x0 0x0>; > + }; > + > + soc: soc { > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + compatible = "simple-bus"; > + > + intc: interrupt-controller@f9000000 { > + compatible = "qcom,msm-qgic2"; > + interrupt-controller; > + #interrupt-cells = <3>; > + reg = <0xF9000000 0x1000>, lowercase hex please. > + <0xF9002000 0x1000>; > + }; > + > + gcc: clock-controller@fc400000 { > + compatible = "qcom,gcc-msm8226"; > + #clock-cells = <1>; > + #reset-cells = <1>; > + #power-domain-cells = <1>; > + reg = <0xfc400000 0x4000>; > + }; > + > + msmgpio: pinctrl@fd510000 { > + compatible = "qcom,msm8226-pinctrl"; > + reg = <0xfd510000 0x4000>; > + gpio-controller; > + #gpio-cells = <2>; > + gpio-ranges = <&msmgpio 0 0 117>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + blsp1_uart3: serial@f991f000 { > + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; > + reg = <0xf991f000 0x1000>; > + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; > + clock-names = "core", "iface"; > + status = "disabled"; > + }; > + > + restart@fc4ab000 { > + compatible = "qcom,pshold"; > + reg = <0xfc4ab000 0x4>; > + }; > + > + rng@f9bff000 { > + compatible = "qcom,prng"; > + reg = <0xf9bff000 0x200>; > + clocks = <&gcc GCC_PRNG_AHB_CLK>; > + clock-names = "core"; > + }; > + > + timer@f9020000 { > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + compatible = "arm,armv7-timer-mem"; > + reg = <0xf9020000 0x1000>; > + clock-frequency = <19200000>; Can you remove this clock-frequency property? Hopefully the firmware is setting this frequency properly so the driver can read it out of the registers instead of DT. > + > + frame@f9021000 { > + frame-number = <0>; > + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0xf9021000 0x1000>, > + <0xf9022000 0x1000>; > + }; > + > + frame@f9023000 { > + frame-number = <1>; > + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0xf9023000 0x1000>; > + status = "disabled"; > + }; > + > + frame@f9024000 { > + frame-number = <2>; > + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0xf9024000 0x1000>; > + status = "disabled"; > + }; > + > + frame@f9025000 { > + frame-number = <3>; > + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0xf9025000 0x1000>; > + status = "disabled"; > + }; > + > + frame@f9026000 { > + frame-number = <4>; > + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0xf9026000 0x1000>; > + status = "disabled"; > + }; > + > + frame@f9027000 { > + frame-number = <5>; > + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0xf9027000 0x1000>; > + status = "disabled"; > + }; > + > + frame@f9028000 { > + frame-number = <6>; > + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0xf9028000 0x1000>; > + status = "disabled"; > + }; > + }; > + }; > + > + timer { > + compatible = "arm,armv7-timer"; > + interrupts = <GIC_PPI 2 > + (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 3 > + (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 4 > + (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 1 > + (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>; > + clock-frequency = <19200000>; Same frequency comment. > + }; > +}; ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 3/5] arm: dts: qcom: Add support for MSM8226 SoC 2021-03-26 14:58 ` [PATCH 3/5] arm: dts: qcom: Add support for MSM8226 SoC Bartosz Dudziak 2021-03-26 18:21 ` Stephen Boyd @ 2021-03-30 3:41 ` Bjorn Andersson 1 sibling, 0 replies; 14+ messages in thread From: Bjorn Andersson @ 2021-03-30 3:41 UTC (permalink / raw) To: Bartosz Dudziak Cc: Andy Gross, Michael Turquette, Stephen Boyd, Rob Herring, linux-clk, linux-arm-msm, linux-kernel, devicetree On Fri 26 Mar 09:58 CDT 2021, Bartosz Dudziak wrote: > This patch adds basic device tree support for MSM8226 SoC which belongs > to the Snapdragon 400 family. For now, this file adds the basic nodes > like gcc, pinctrl and other required configuration for booting up to > the serial console. > > Signed-off-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl> > --- > arch/arm/boot/dts/qcom-msm8226.dtsi | 152 ++++++++++++++++++++++++++++ > 1 file changed, 152 insertions(+) > create mode 100644 arch/arm/boot/dts/qcom-msm8226.dtsi > > diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom-msm8226.dtsi > new file mode 100644 > index 0000000000..81bb19398e > --- /dev/null > +++ b/arch/arm/boot/dts/qcom-msm8226.dtsi > @@ -0,0 +1,152 @@ > +// SPDX-License-Identifier: GPL-2.0 Can you please make this BSD license? > +/* > + * Copyright (c) 2020, The Linux Foundation. All rights reserved. > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/interrupt-controller/arm-gic.h> > +#include <dt-bindings/clock/qcom,gcc-msm8974.h> > + > +/ { > + #address-cells = <1>; > + #size-cells = <1>; > + model = "Qualcomm Technologies, Inc. MSM8226"; > + compatible = "qcom,msm8226"; model and compatible should always be specified in the .dts, so the ones specified here would be overwritten. So drop them here. > + interrupt-parent = <&intc>; > + > + chosen { }; > + > + memory { > + device_type = "memory"; > + /* We expect the bootloader to fill in the size */ > + reg = <0x0 0x0>; > + }; > + > + soc: soc { > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + compatible = "simple-bus"; > + > + intc: interrupt-controller@f9000000 { > + compatible = "qcom,msm-qgic2"; > + interrupt-controller; > + #interrupt-cells = <3>; > + reg = <0xF9000000 0x1000>, > + <0xF9002000 0x1000>; > + }; > + > + gcc: clock-controller@fc400000 { > + compatible = "qcom,gcc-msm8226"; > + #clock-cells = <1>; > + #reset-cells = <1>; > + #power-domain-cells = <1>; > + reg = <0xfc400000 0x4000>; > + }; > + > + msmgpio: pinctrl@fd510000 { Rename the label "tlmm" > + compatible = "qcom,msm8226-pinctrl"; > + reg = <0xfd510000 0x4000>; > + gpio-controller; > + #gpio-cells = <2>; > + gpio-ranges = <&msmgpio 0 0 117>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + blsp1_uart3: serial@f991f000 { > + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; > + reg = <0xf991f000 0x1000>; > + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; > + clock-names = "core", "iface"; > + status = "disabled"; > + }; > + > + restart@fc4ab000 { > + compatible = "qcom,pshold"; > + reg = <0xfc4ab000 0x4>; > + }; > + > + rng@f9bff000 { > + compatible = "qcom,prng"; > + reg = <0xf9bff000 0x200>; > + clocks = <&gcc GCC_PRNG_AHB_CLK>; > + clock-names = "core"; > + }; > + > + timer@f9020000 { > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + compatible = "arm,armv7-timer-mem"; It's nice to have compatible & reg first in the nodes. Regards, Bjorn > + reg = <0xf9020000 0x1000>; > + clock-frequency = <19200000>; > + > + frame@f9021000 { > + frame-number = <0>; > + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0xf9021000 0x1000>, > + <0xf9022000 0x1000>; > + }; > + > + frame@f9023000 { > + frame-number = <1>; > + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0xf9023000 0x1000>; > + status = "disabled"; > + }; > + > + frame@f9024000 { > + frame-number = <2>; > + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0xf9024000 0x1000>; > + status = "disabled"; > + }; > + > + frame@f9025000 { > + frame-number = <3>; > + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0xf9025000 0x1000>; > + status = "disabled"; > + }; > + > + frame@f9026000 { > + frame-number = <4>; > + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0xf9026000 0x1000>; > + status = "disabled"; > + }; > + > + frame@f9027000 { > + frame-number = <5>; > + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0xf9027000 0x1000>; > + status = "disabled"; > + }; > + > + frame@f9028000 { > + frame-number = <6>; > + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0xf9028000 0x1000>; > + status = "disabled"; > + }; > + }; > + }; > + > + timer { > + compatible = "arm,armv7-timer"; > + interrupts = <GIC_PPI 2 > + (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 3 > + (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 4 > + (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 1 > + (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>; > + clock-frequency = <19200000>; > + }; > +}; > -- > 2.25.1 > ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 4/5] dt-bindings: arm: qcom: Document MSM8226 SoC binding 2021-03-26 14:58 [PATCH 0/5] Samsung Galaxy S III Neo Initial DTS Bartosz Dudziak ` (2 preceding siblings ...) 2021-03-26 14:58 ` [PATCH 3/5] arm: dts: qcom: Add support for MSM8226 SoC Bartosz Dudziak @ 2021-03-26 14:58 ` Bartosz Dudziak 2021-03-27 18:40 ` Rob Herring 2021-03-26 14:58 ` [PATCH 5/5] arm: dts: qcom: Add initial DTS file for Samsung Galaxy S III Neo phone Bartosz Dudziak 2021-04-18 13:00 ` [PATCH 0/5] Samsung Galaxy S III Neo Initial DTS Bartosz Dudziak 5 siblings, 1 reply; 14+ messages in thread From: Bartosz Dudziak @ 2021-03-26 14:58 UTC (permalink / raw) To: Andy Gross, Bjorn Andersson, Michael Turquette, Stephen Boyd, Rob Herring, linux-clk, linux-arm-msm, linux-kernel, devicetree Cc: Bartosz Dudziak Document the MSM8226 SoC device-tree binding. Signed-off-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl> --- Documentation/devicetree/bindings/arm/qcom.yaml | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 11ec349d56..73902ce46f 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -31,6 +31,7 @@ description: | ipq6018 ipq8074 mdm9615 + msm8226 msm8916 msm8974 msm8992 @@ -111,6 +112,11 @@ properties: - qcom,apq8084-sbc - const: qcom,apq8084 + - items: + - enum: + - samsung,s3ve3g + - const: qcom,msm8226 + - items: - enum: - qcom,msm8960-cdp -- 2.25.1 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [PATCH 4/5] dt-bindings: arm: qcom: Document MSM8226 SoC binding 2021-03-26 14:58 ` [PATCH 4/5] dt-bindings: arm: qcom: Document MSM8226 SoC binding Bartosz Dudziak @ 2021-03-27 18:40 ` Rob Herring 0 siblings, 0 replies; 14+ messages in thread From: Rob Herring @ 2021-03-27 18:40 UTC (permalink / raw) To: Bartosz Dudziak Cc: Andy Gross, linux-arm-msm, linux-clk, Bjorn Andersson, Rob Herring, Stephen Boyd, linux-kernel, devicetree, Michael Turquette On Fri, 26 Mar 2021 15:58:15 +0100, Bartosz Dudziak wrote: > Document the MSM8226 SoC device-tree binding. > > Signed-off-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl> > --- > Documentation/devicetree/bindings/arm/qcom.yaml | 6 ++++++ > 1 file changed, 6 insertions(+) > Acked-by: Rob Herring <robh@kernel.org> ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 5/5] arm: dts: qcom: Add initial DTS file for Samsung Galaxy S III Neo phone 2021-03-26 14:58 [PATCH 0/5] Samsung Galaxy S III Neo Initial DTS Bartosz Dudziak ` (3 preceding siblings ...) 2021-03-26 14:58 ` [PATCH 4/5] dt-bindings: arm: qcom: Document MSM8226 SoC binding Bartosz Dudziak @ 2021-03-26 14:58 ` Bartosz Dudziak 2021-03-29 0:50 ` kernel test robot 2021-04-18 13:00 ` [PATCH 0/5] Samsung Galaxy S III Neo Initial DTS Bartosz Dudziak 5 siblings, 1 reply; 14+ messages in thread From: Bartosz Dudziak @ 2021-03-26 14:58 UTC (permalink / raw) To: Andy Gross, Bjorn Andersson, Michael Turquette, Stephen Boyd, Rob Herring, linux-clk, linux-arm-msm, linux-kernel, devicetree Cc: Bartosz Dudziak This DTS has support for the Samsung Galaxy S III Neo (codenamed s3ve3g) phone. Initial version have just a working serial console. Signed-off-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl> --- arch/arm/boot/dts/Makefile | 1 + .../boot/dts/qcom-msm8226-samsung-s3ve3g.dts | 25 +++++++++++++++++++ 2 files changed, 26 insertions(+) create mode 100644 arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 8e5d4ab4e7..080ff37fdb 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -920,6 +920,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-ipq4019-ap.dk07.1-c2.dtb \ qcom-ipq8064-ap148.dtb \ qcom-ipq8064-rb3011.dtb \ + qcom-msm8226-samsung-s3ve3g.dtb \ qcom-msm8660-surf.dtb \ qcom-msm8960-cdp.dtb \ qcom-msm8974-fairphone-fp2.dtb \ diff --git a/arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts b/arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts new file mode 100644 index 0000000000..4790077962 --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +#include "qcom-msm8226.dtsi" + +/ { + model = "Samsung Galaxy S III Neo"; + compatible = "samsung,s3ve3g", "qcom,msm8226"; + + aliases { + serial0 = &blsp1_uart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&soc { + serial@f991f000 { + status = "ok"; + }; +}; -- 2.25.1 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [PATCH 5/5] arm: dts: qcom: Add initial DTS file for Samsung Galaxy S III Neo phone 2021-03-26 14:58 ` [PATCH 5/5] arm: dts: qcom: Add initial DTS file for Samsung Galaxy S III Neo phone Bartosz Dudziak @ 2021-03-29 0:50 ` kernel test robot 0 siblings, 0 replies; 14+ messages in thread From: kernel test robot @ 2021-03-29 0:50 UTC (permalink / raw) To: Bartosz Dudziak, Andy Gross, Bjorn Andersson, Michael Turquette, Stephen Boyd, Rob Herring, linux-clk, linux-arm-msm, linux-kernel, devicetree Cc: kbuild-all, Bartosz Dudziak Hi Bartosz, Thank you for the patch! Perhaps something to improve: [auto build test WARNING on clk/clk-next] [also build test WARNING on robh/for-next v5.12-rc4 next-20210326] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch] url: https://github.com/0day-ci/linux/commits/Bartosz-Dudziak/Samsung-Galaxy-S-III-Neo-Initial-DTS/20210326-230134 base: https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git clk-next :::::: branch date: 24 hours ago :::::: commit date: 24 hours ago compiler: arm-linux-gnueabi-gcc (GCC) 9.3.0 reproduce: make ARCH=arm dtbs_check If you fix the issue, kindly add following tag as appropriate Reported-by: kernel test robot <lkp@intel.com> dtcheck warnings: (new ones prefixed by >>) >> arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 0]]} From schema: /usr/local/lib/python3.9/dist-packages/dtschema/schemas/root-node.yaml --- 0-DAY CI Kernel Test Service, Intel Corporation https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 5/5] arm: dts: qcom: Add initial DTS file for Samsung Galaxy S III Neo phone @ 2021-03-29 0:50 ` kernel test robot 0 siblings, 0 replies; 14+ messages in thread From: kernel test robot @ 2021-03-29 0:50 UTC (permalink / raw) To: kbuild-all [-- Attachment #1: Type: text/plain, Size: 1236 bytes --] Hi Bartosz, Thank you for the patch! Perhaps something to improve: [auto build test WARNING on clk/clk-next] [also build test WARNING on robh/for-next v5.12-rc4 next-20210326] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch] url: https://github.com/0day-ci/linux/commits/Bartosz-Dudziak/Samsung-Galaxy-S-III-Neo-Initial-DTS/20210326-230134 base: https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git clk-next :::::: branch date: 24 hours ago :::::: commit date: 24 hours ago compiler: arm-linux-gnueabi-gcc (GCC) 9.3.0 reproduce: make ARCH=arm dtbs_check If you fix the issue, kindly add following tag as appropriate Reported-by: kernel test robot <lkp@intel.com> dtcheck warnings: (new ones prefixed by >>) >> arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 0]]} From schema: /usr/local/lib/python3.9/dist-packages/dtschema/schemas/root-node.yaml --- 0-DAY CI Kernel Test Service, Intel Corporation https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 0/5] Samsung Galaxy S III Neo Initial DTS 2021-03-26 14:58 [PATCH 0/5] Samsung Galaxy S III Neo Initial DTS Bartosz Dudziak ` (4 preceding siblings ...) 2021-03-26 14:58 ` [PATCH 5/5] arm: dts: qcom: Add initial DTS file for Samsung Galaxy S III Neo phone Bartosz Dudziak @ 2021-04-18 13:00 ` Bartosz Dudziak 5 siblings, 0 replies; 14+ messages in thread From: Bartosz Dudziak @ 2021-04-18 13:00 UTC (permalink / raw) To: Andy Gross, Bjorn Andersson, Michael Turquette, Stephen Boyd, Rob Herring, linux-clk, linux-arm-msm, linux-kernel, devicetree On Fri, Mar 26, 2021 at 03:58:11PM +0100, Bartosz Dudziak wrote: > This series of patches enables to boot MSM8226 SoC in Samsung Galaxy S III Neo > mobile phone. Implemented clocks are on top of MSM8974 GCC driver because there > is really little difference between them. UART serial communication is working. > I have working patches for the regulators, EMMC, multithreading and Wifi for > this device but they are not clean and ready to submit. > > Bartosz Dudziak (5): > dt-bindings: clock: qcom: Add MSM8226 GCC clock bindings > clk: qcom: gcc: Add support for Global Clock controller found on > MSM8226 > arm: dts: qcom: Add support for MSM8226 SoC > dt-bindings: arm: qcom: Document MSM8226 SoC binding > arm: dts: qcom: Add initial DTS file for Samsung Galaxy S III Neo > phone > > .../devicetree/bindings/arm/qcom.yaml | 6 + > .../devicetree/bindings/clock/qcom,gcc.yaml | 13 +- > arch/arm/boot/dts/Makefile | 1 + > .../boot/dts/qcom-msm8226-samsung-s3ve3g.dts | 25 +++ > arch/arm/boot/dts/qcom-msm8226.dtsi | 152 ++++++++++++++ > drivers/clk/qcom/gcc-msm8974.c | 185 ++++++++++++++++-- > 6 files changed, 364 insertions(+), 18 deletions(-) > create mode 100644 arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts > create mode 100644 arch/arm/boot/dts/qcom-msm8226.dtsi > > -- > 2.25.1 > I have sent version V2 of the patches ^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2021-04-18 13:00 UTC | newest] Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-03-26 14:58 [PATCH 0/5] Samsung Galaxy S III Neo Initial DTS Bartosz Dudziak 2021-03-26 14:58 ` [PATCH 1/5] dt-bindings: clock: qcom: Add MSM8226 GCC clock bindings Bartosz Dudziak 2021-03-27 18:40 ` Rob Herring 2021-03-26 14:58 ` [PATCH 2/5] clk: qcom: gcc: Add support for Global Clock controller found on MSM8226 Bartosz Dudziak 2021-03-26 18:23 ` Stephen Boyd 2021-03-26 14:58 ` [PATCH 3/5] arm: dts: qcom: Add support for MSM8226 SoC Bartosz Dudziak 2021-03-26 18:21 ` Stephen Boyd 2021-03-30 3:41 ` Bjorn Andersson 2021-03-26 14:58 ` [PATCH 4/5] dt-bindings: arm: qcom: Document MSM8226 SoC binding Bartosz Dudziak 2021-03-27 18:40 ` Rob Herring 2021-03-26 14:58 ` [PATCH 5/5] arm: dts: qcom: Add initial DTS file for Samsung Galaxy S III Neo phone Bartosz Dudziak 2021-03-29 0:50 ` kernel test robot 2021-03-29 0:50 ` kernel test robot 2021-04-18 13:00 ` [PATCH 0/5] Samsung Galaxy S III Neo Initial DTS Bartosz Dudziak
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.