From: Arnd Bergmann <arnd@kernel.org>
To: soc@kernel.org, Kevin Hilman <khilman@baylibre.com>, arm@kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>,
linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org
Subject: Re: [GIT PULL] arm64: dts: amlogic updates for v5.13
Date: Thu, 8 Apr 2021 17:24:22 +0200 [thread overview]
Message-ID: <161789493793.1630479.15784072871445378505.b4-ty@arndb.de> (raw)
In-Reply-To: <7h5z10mjpp.fsf@baylibre.com>
From: Arnd Bergmann <arnd@arndb.de>
On Mon, 05 Apr 2021 15:48:18 -0700, Kevin Hilman wrote:
> The following changes since commit fe07bfda2fb9cdef8a4d4008a409bb02f35f1bd8:
>
> Linux 5.12-rc1 (2021-02-28 16:05:19 -0800)
>
> are available in the Git repository at:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic.git tags/amlogic-dt64
>
> [...]
Merged into arm/dt, thanks!
Can you have a look at these added warnings from 'make dtbs_check W=1'?
amlogic/meson-gxl-s905d-mecool-kii-pro.dts:31.19-42.4: Warning (avoid_unnecessary_addr_size): /gpio-keys-polled: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
amlogic/meson-gxl-s905d-mecool-kii-pro.dts:37.12-41.5: Warning (unit_address_vs_reg): /gpio-keys-polled/button@0: node has a unit name, but no reg or ranges property
amlogic/meson-gxm-mecool-kiii-pro.dts:36.19-47.4: Warning (avoid_unnecessary_addr_size): /gpio-keys-polled: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
amlogic/meson-gxm-mecool-kiii-pro.dts:42.12-46.5: Warning (unit_address_vs_reg): /gpio-keys-polled/button@0: node has a unit name, but no reg or ranges property
amlogic/meson-gxm-minix-neo-u9h.dts:42.19-53.4: Warning (avoid_unnecessary_addr_size): /gpio-keys-polled: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
amlogic/meson-gxm-minix-neo-u9h.dts:48.12-52.5: Warning (unit_address_vs_reg): /gpio-keys-polled/button@0: node has a unit name, but no reg or ranges property
amlogic/meson-gxl-s805x-p241.dt.yaml: serial@84c0: 'uart-has-rtscts' does not match any of the regexes: 'pinctrl-[0-9]+' amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: audio-controller@5400:
'sound-name-prefix' does not match any of the regexes: 'pinctrl-[0-9]+' amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml:
audio-controller@c8832000: 'AVDD-supply', 'sound-name-prefix' do not match any f the regexes: 'pinctrl-[0-9]+'
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: bluetooth: clock-names: ['lpo'] is too short
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: bluetooth: clock-names:0: 'txco' was expected
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: bluetooth: clocks: [[23]] is too short
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: bus@c8834000: eth-phy-mux: {'type': 'object'} is not allowed for {'compatible': ['mdio-mux-mmioreg', 'mdio-mux'], '#address-cells': [[1]], '#size-cells': [[0]], 'reg': [[0, 1372, 0, 4]], 'mux-mask': [[4294967295]], 'mdio-parent-bus': [[35]], 'mdio@e40908ff': {'reg': [[3825797375]], '#address-cells': [[1]], '#size-cells': [[0]], 'ethernet-phy@8': {'compatible': ['ethernet-phy-id0181.4400'], 'interrupts': [[0, 9, 4]], 'reg': [[8]], 'max-speed': [[100]], 'phandle': [[36]]}}, 'mdio@2009087f': {'reg': [[537462911]], '#address-cells': [[1]], '#size-cells': [[0]]}}
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: bus@c8834000: rng: {'type': 'object'} is not allowed for {'compatible': ['amlogic,meson-rng'], 'reg': [[0, 0, 0, 4]], 'clocks': [[3, 25]], 'clock-names': ['core']}
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: hdmi-tx@c883a000: 'sound-name-prefix' does not match any of the regexes: pinctrl-[0-9]+'
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: ir@580: linux,rc-map-name:0: 'rc-mecool-kii-pro' is not one of ['rc-adstech-dvb-t-ci', 'rc-alink-dtu-m', 'rc-anysee', 'rc-apac-viewcomp',..., 'rc-zx-irdec']
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: leds: 'blue' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: serial@84c0: 'bluetooth', 'uart-has-rtscts' do not match any of the regexes:
'pinctrl-0-9]+'
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: sound: 'assigned-clock-parents', 'assigned-clock-rates', 'assigned-clocks' do not atch any of the regexes: '^dai-link-[0-9]+$', 'pinctrl-[0-9]+'
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: sound: 'clocks' is a dependency of 'assigned-clocks'
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: sound: audio-routing: ['AU2 INL', 'ACODEC LOLP', 'AU2 INR', 'ACODEC LORP', AU2 INL', 'ACODEC LOLN', 'AU2 INR', 'ACODEC LORN', 'Lineout', 'AU2 OUTL', 'Lineout', 'AU2 OUTR'] is too long
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: sound: dai-link-0:sound-dai:0: [63, 0, 0] is too long
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: sound: dai-link-0:sound-dai:0:1: missing phandle tag in 0
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: sound: dai-link-0:sound-dai:0:2: missing phandle tag in 0
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: sound: dai-link-1:sound-dai:0: [63, 0, 1] is too long
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: sound: dai-link-1:sound-dai:0:1: missing phandle tag in 0
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: sound: dai-link-1:sound-dai:0:2: missing phandle tag in 1
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: vpu@d0100000: 'amlogic,canvas' does not match any of the regexes: 'pinctrl-[0-9]+'
merge commit: aa1e345ade42ba90ab868750acab27a360998af1
Arnd
WARNING: multiple messages have this Message-ID (diff)
From: Arnd Bergmann <arnd@kernel.org>
To: soc@kernel.org, Kevin Hilman <khilman@baylibre.com>, arm@kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>,
linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org
Subject: Re: [GIT PULL] arm64: dts: amlogic updates for v5.13
Date: Thu, 8 Apr 2021 17:24:22 +0200 [thread overview]
Message-ID: <161789493793.1630479.15784072871445378505.b4-ty@arndb.de> (raw)
Message-ID: <20210408152422.v62M6JblYVs2GtzBQnGHIx6DYGuIAmkBLKMAjd67hXk@z> (raw)
In-Reply-To: <7h5z10mjpp.fsf@baylibre.com>
From: Arnd Bergmann <arnd@arndb.de>
On Mon, 05 Apr 2021 15:48:18 -0700, Kevin Hilman wrote:
> The following changes since commit fe07bfda2fb9cdef8a4d4008a409bb02f35f1bd8:
>
> Linux 5.12-rc1 (2021-02-28 16:05:19 -0800)
>
> are available in the Git repository at:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic.git tags/amlogic-dt64
>
> [...]
Merged into arm/dt, thanks!
Can you have a look at these added warnings from 'make dtbs_check W=1'?
amlogic/meson-gxl-s905d-mecool-kii-pro.dts:31.19-42.4: Warning (avoid_unnecessary_addr_size): /gpio-keys-polled: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
amlogic/meson-gxl-s905d-mecool-kii-pro.dts:37.12-41.5: Warning (unit_address_vs_reg): /gpio-keys-polled/button@0: node has a unit name, but no reg or ranges property
amlogic/meson-gxm-mecool-kiii-pro.dts:36.19-47.4: Warning (avoid_unnecessary_addr_size): /gpio-keys-polled: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
amlogic/meson-gxm-mecool-kiii-pro.dts:42.12-46.5: Warning (unit_address_vs_reg): /gpio-keys-polled/button@0: node has a unit name, but no reg or ranges property
amlogic/meson-gxm-minix-neo-u9h.dts:42.19-53.4: Warning (avoid_unnecessary_addr_size): /gpio-keys-polled: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
amlogic/meson-gxm-minix-neo-u9h.dts:48.12-52.5: Warning (unit_address_vs_reg): /gpio-keys-polled/button@0: node has a unit name, but no reg or ranges property
amlogic/meson-gxl-s805x-p241.dt.yaml: serial@84c0: 'uart-has-rtscts' does not match any of the regexes: 'pinctrl-[0-9]+' amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: audio-controller@5400:
'sound-name-prefix' does not match any of the regexes: 'pinctrl-[0-9]+' amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml:
audio-controller@c8832000: 'AVDD-supply', 'sound-name-prefix' do not match any f the regexes: 'pinctrl-[0-9]+'
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: bluetooth: clock-names: ['lpo'] is too short
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: bluetooth: clock-names:0: 'txco' was expected
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: bluetooth: clocks: [[23]] is too short
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: bus@c8834000: eth-phy-mux: {'type': 'object'} is not allowed for {'compatible': ['mdio-mux-mmioreg', 'mdio-mux'], '#address-cells': [[1]], '#size-cells': [[0]], 'reg': [[0, 1372, 0, 4]], 'mux-mask': [[4294967295]], 'mdio-parent-bus': [[35]], 'mdio@e40908ff': {'reg': [[3825797375]], '#address-cells': [[1]], '#size-cells': [[0]], 'ethernet-phy@8': {'compatible': ['ethernet-phy-id0181.4400'], 'interrupts': [[0, 9, 4]], 'reg': [[8]], 'max-speed': [[100]], 'phandle': [[36]]}}, 'mdio@2009087f': {'reg': [[537462911]], '#address-cells': [[1]], '#size-cells': [[0]]}}
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: bus@c8834000: rng: {'type': 'object'} is not allowed for {'compatible': ['amlogic,meson-rng'], 'reg': [[0, 0, 0, 4]], 'clocks': [[3, 25]], 'clock-names': ['core']}
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: hdmi-tx@c883a000: 'sound-name-prefix' does not match any of the regexes: pinctrl-[0-9]+'
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: ir@580: linux,rc-map-name:0: 'rc-mecool-kii-pro' is not one of ['rc-adstech-dvb-t-ci', 'rc-alink-dtu-m', 'rc-anysee', 'rc-apac-viewcomp',..., 'rc-zx-irdec']
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: leds: 'blue' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: serial@84c0: 'bluetooth', 'uart-has-rtscts' do not match any of the regexes:
'pinctrl-0-9]+'
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: sound: 'assigned-clock-parents', 'assigned-clock-rates', 'assigned-clocks' do not atch any of the regexes: '^dai-link-[0-9]+$', 'pinctrl-[0-9]+'
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: sound: 'clocks' is a dependency of 'assigned-clocks'
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: sound: audio-routing: ['AU2 INL', 'ACODEC LOLP', 'AU2 INR', 'ACODEC LORP', AU2 INL', 'ACODEC LOLN', 'AU2 INR', 'ACODEC LORN', 'Lineout', 'AU2 OUTL', 'Lineout', 'AU2 OUTR'] is too long
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: sound: dai-link-0:sound-dai:0: [63, 0, 0] is too long
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: sound: dai-link-0:sound-dai:0:1: missing phandle tag in 0
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: sound: dai-link-0:sound-dai:0:2: missing phandle tag in 0
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: sound: dai-link-1:sound-dai:0: [63, 0, 1] is too long
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: sound: dai-link-1:sound-dai:0:1: missing phandle tag in 0
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: sound: dai-link-1:sound-dai:0:2: missing phandle tag in 1
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: vpu@d0100000: 'amlogic,canvas' does not match any of the regexes: 'pinctrl-[0-9]+'
merge commit: aa1e345ade42ba90ab868750acab27a360998af1
Arnd
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
WARNING: multiple messages have this Message-ID (diff)
From: Arnd Bergmann <arnd@kernel.org>
To: soc@kernel.org, Kevin Hilman <khilman@baylibre.com>, arm@kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>,
linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org
Subject: Re: [GIT PULL] arm64: dts: amlogic updates for v5.13
Date: Thu, 8 Apr 2021 17:24:22 +0200 [thread overview]
Message-ID: <161789493793.1630479.15784072871445378505.b4-ty@arndb.de> (raw)
Message-ID: <20210408152422.WDSdJBt54m9dBNiais76nyBRw3fPYASr9v6owRhEn8c@z> (raw)
In-Reply-To: <7h5z10mjpp.fsf@baylibre.com>
From: Arnd Bergmann <arnd@arndb.de>
On Mon, 05 Apr 2021 15:48:18 -0700, Kevin Hilman wrote:
> The following changes since commit fe07bfda2fb9cdef8a4d4008a409bb02f35f1bd8:
>
> Linux 5.12-rc1 (2021-02-28 16:05:19 -0800)
>
> are available in the Git repository at:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic.git tags/amlogic-dt64
>
> [...]
Merged into arm/dt, thanks!
Can you have a look at these added warnings from 'make dtbs_check W=1'?
amlogic/meson-gxl-s905d-mecool-kii-pro.dts:31.19-42.4: Warning (avoid_unnecessary_addr_size): /gpio-keys-polled: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
amlogic/meson-gxl-s905d-mecool-kii-pro.dts:37.12-41.5: Warning (unit_address_vs_reg): /gpio-keys-polled/button@0: node has a unit name, but no reg or ranges property
amlogic/meson-gxm-mecool-kiii-pro.dts:36.19-47.4: Warning (avoid_unnecessary_addr_size): /gpio-keys-polled: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
amlogic/meson-gxm-mecool-kiii-pro.dts:42.12-46.5: Warning (unit_address_vs_reg): /gpio-keys-polled/button@0: node has a unit name, but no reg or ranges property
amlogic/meson-gxm-minix-neo-u9h.dts:42.19-53.4: Warning (avoid_unnecessary_addr_size): /gpio-keys-polled: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
amlogic/meson-gxm-minix-neo-u9h.dts:48.12-52.5: Warning (unit_address_vs_reg): /gpio-keys-polled/button@0: node has a unit name, but no reg or ranges property
amlogic/meson-gxl-s805x-p241.dt.yaml: serial@84c0: 'uart-has-rtscts' does not match any of the regexes: 'pinctrl-[0-9]+' amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: audio-controller@5400:
'sound-name-prefix' does not match any of the regexes: 'pinctrl-[0-9]+' amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml:
audio-controller@c8832000: 'AVDD-supply', 'sound-name-prefix' do not match any f the regexes: 'pinctrl-[0-9]+'
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: bluetooth: clock-names: ['lpo'] is too short
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: bluetooth: clock-names:0: 'txco' was expected
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: bluetooth: clocks: [[23]] is too short
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: bus@c8834000: eth-phy-mux: {'type': 'object'} is not allowed for {'compatible': ['mdio-mux-mmioreg', 'mdio-mux'], '#address-cells': [[1]], '#size-cells': [[0]], 'reg': [[0, 1372, 0, 4]], 'mux-mask': [[4294967295]], 'mdio-parent-bus': [[35]], 'mdio@e40908ff': {'reg': [[3825797375]], '#address-cells': [[1]], '#size-cells': [[0]], 'ethernet-phy@8': {'compatible': ['ethernet-phy-id0181.4400'], 'interrupts': [[0, 9, 4]], 'reg': [[8]], 'max-speed': [[100]], 'phandle': [[36]]}}, 'mdio@2009087f': {'reg': [[537462911]], '#address-cells': [[1]], '#size-cells': [[0]]}}
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: bus@c8834000: rng: {'type': 'object'} is not allowed for {'compatible': ['amlogic,meson-rng'], 'reg': [[0, 0, 0, 4]], 'clocks': [[3, 25]], 'clock-names': ['core']}
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: hdmi-tx@c883a000: 'sound-name-prefix' does not match any of the regexes: pinctrl-[0-9]+'
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: ir@580: linux,rc-map-name:0: 'rc-mecool-kii-pro' is not one of ['rc-adstech-dvb-t-ci', 'rc-alink-dtu-m', 'rc-anysee', 'rc-apac-viewcomp',..., 'rc-zx-irdec']
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: leds: 'blue' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: serial@84c0: 'bluetooth', 'uart-has-rtscts' do not match any of the regexes:
'pinctrl-0-9]+'
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: sound: 'assigned-clock-parents', 'assigned-clock-rates', 'assigned-clocks' do not atch any of the regexes: '^dai-link-[0-9]+$', 'pinctrl-[0-9]+'
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: sound: 'clocks' is a dependency of 'assigned-clocks'
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: sound: audio-routing: ['AU2 INL', 'ACODEC LOLP', 'AU2 INR', 'ACODEC LORP', AU2 INL', 'ACODEC LOLN', 'AU2 INR', 'ACODEC LORN', 'Lineout', 'AU2 OUTL', 'Lineout', 'AU2 OUTR'] is too long
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: sound: dai-link-0:sound-dai:0: [63, 0, 0] is too long
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: sound: dai-link-0:sound-dai:0:1: missing phandle tag in 0
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: sound: dai-link-0:sound-dai:0:2: missing phandle tag in 0
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: sound: dai-link-1:sound-dai:0: [63, 0, 1] is too long
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: sound: dai-link-1:sound-dai:0:1: missing phandle tag in 0
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: sound: dai-link-1:sound-dai:0:2: missing phandle tag in 1
amlogic/meson-gxl-s905d-mecool-kii-pro.dt.yaml: vpu@d0100000: 'amlogic,canvas' does not match any of the regexes: 'pinctrl-[0-9]+'
merge commit: aa1e345ade42ba90ab868750acab27a360998af1
Arnd
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-04-08 15:24 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-05 22:48 [GIT PULL] arm64: dts: amlogic updates for v5.13 Kevin Hilman
2021-04-05 22:48 ` Kevin Hilman
2021-04-05 22:48 ` Kevin Hilman
2021-04-08 15:24 ` Arnd Bergmann [this message]
2021-04-08 15:24 ` Arnd Bergmann
2021-04-08 15:24 ` Arnd Bergmann
2021-04-09 18:10 ` Kevin Hilman
2021-04-09 18:10 ` Kevin Hilman
2021-04-09 18:10 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=161789493793.1630479.15784072871445378505.b4-ty@arndb.de \
--to=arnd@kernel.org \
--cc=arm@kernel.org \
--cc=arnd@arndb.de \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=soc@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.