* [PATCH v5 0/7] Add rt-thread art-pi board support
@ 2021-04-09 7:28 dillon.minfei at gmail.com
2021-04-09 7:28 ` [PATCH v5 1/7] ARM: dts: stm32: split sdram pin & timing parameter into specific board dts dillon.minfei at gmail.com
` (6 more replies)
0 siblings, 7 replies; 15+ messages in thread
From: dillon.minfei at gmail.com @ 2021-04-09 7:28 UTC (permalink / raw)
To: u-boot
From: dillon min <dillon.minfei@gmail.com>
These patches aim to adds u-boot support on art-pi board.
the board resources:
- stm32h750xbh6 128k flash, 1024k sram
- 32MiB sdram
- 16MiB spi flash
- 8MiB qspi flash
- onboard wifi, bt, fm
the detail board information can be found at:
https://art-pi.gitee.io/website/
---
changes in v5:
- remove "for STMicroelectronics." from Author(s) description
changes in v4:
- sync with kernel side device tree submit
- use strlcpy in stm32_sdram.c
- update CONFIG_BOOTARGS, remove rdinit=/linuxrc, to use kernel's devtmpfs
- remove unused st,stm32h750-pinctrl from patch v3
changes in v3:
two mirror changes in [PATCH v3 2/6], others same to version 2
- remove "for STMicroelectronics." from arch/arm/dts/stm32h750-pinctrl.dtsi
- correct misspelling parameters
you can found detail patch v2 information at link:
https://patchwork.ozlabs.org/project/uboot/list/?series=236009
changes in v2:
- fix wrong author/date in previous submit
- sync with kernel device tree files
- add st,stm32h750-pinctrl in doc and pinctrl driver
*** BLURB HERE ***
dillon min (7):
ARM: dts: stm32: split sdram pin & timing parameter into specific
board dts
ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h750
ARM: dts: stm32: add new instances for stm32h743 MCU
ARM: dts: stm32: fix i2c node typo in stm32h743, update dmamux1
register
ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6
ram: stm32: fix strsep failed on read only memory
board: Add rt-thread art-pi board support
arch/arm/dts/Makefile | 3 +-
arch/arm/dts/stm32h7-pinctrl.dtsi | 274 ++++++++++++++++++++++++
arch/arm/dts/stm32h7-u-boot.dtsi | 100 +--------
arch/arm/dts/stm32h743-pinctrl.dtsi | 306 ---------------------------
arch/arm/dts/stm32h743.dtsi | 178 +++++++++++++++-
arch/arm/dts/stm32h743i-disco-u-boot.dtsi | 98 +++++++++
arch/arm/dts/stm32h743i-disco.dts | 2 +-
arch/arm/dts/stm32h743i-eval-u-boot.dtsi | 98 +++++++++
arch/arm/dts/stm32h743i-eval.dts | 2 +-
arch/arm/dts/stm32h750.dtsi | 5 +
arch/arm/dts/stm32h750i-art-pi-u-boot.dtsi | 81 +++++++
arch/arm/dts/stm32h750i-art-pi.dts | 188 ++++++++++++++++
arch/arm/mach-stm32/stm32h7/Kconfig | 4 +
board/st/stm32h750-art-pi/Kconfig | 19 ++
board/st/stm32h750-art-pi/MAINTAINERS | 7 +
board/st/stm32h750-art-pi/Makefile | 6 +
board/st/stm32h750-art-pi/stm32h750-art-pi.c | 58 +++++
configs/stm32h750-art-pi_defconfig | 51 +++++
drivers/ram/stm32_sdram.c | 3 +
include/configs/stm32h750-art-pi.h | 48 +++++
include/dt-bindings/memory/stm32-sdram.h | 2 +
21 files changed, 1126 insertions(+), 407 deletions(-)
create mode 100644 arch/arm/dts/stm32h7-pinctrl.dtsi
delete mode 100644 arch/arm/dts/stm32h743-pinctrl.dtsi
create mode 100644 arch/arm/dts/stm32h750.dtsi
create mode 100644 arch/arm/dts/stm32h750i-art-pi-u-boot.dtsi
create mode 100644 arch/arm/dts/stm32h750i-art-pi.dts
create mode 100644 board/st/stm32h750-art-pi/Kconfig
create mode 100644 board/st/stm32h750-art-pi/MAINTAINERS
create mode 100644 board/st/stm32h750-art-pi/Makefile
create mode 100644 board/st/stm32h750-art-pi/stm32h750-art-pi.c
create mode 100644 configs/stm32h750-art-pi_defconfig
create mode 100644 include/configs/stm32h750-art-pi.h
--
2.7.4
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH v5 1/7] ARM: dts: stm32: split sdram pin & timing parameter into specific board dts
2021-04-09 7:28 [PATCH v5 0/7] Add rt-thread art-pi board support dillon.minfei at gmail.com
@ 2021-04-09 7:28 ` dillon.minfei at gmail.com
2021-04-09 9:46 ` Patrice CHOTARD
2021-04-09 7:28 ` [PATCH v5 2/7] ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h750 dillon.minfei at gmail.com
` (5 subsequent siblings)
6 siblings, 1 reply; 15+ messages in thread
From: dillon.minfei at gmail.com @ 2021-04-09 7:28 UTC (permalink / raw)
To: u-boot
From: dillon min <dillon.minfei@gmail.com>
As different boards has their own sdram hw connection, mount different
sdram modules, so move sdram timing parameter and pin configuration
to their board device tree.
Signed-off-by: dillon min <dillon.minfei@gmail.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
---
v5: no changes
arch/arm/dts/stm32h7-u-boot.dtsi | 100 ++----------------------------
arch/arm/dts/stm32h743i-disco-u-boot.dtsi | 98 +++++++++++++++++++++++++++++
arch/arm/dts/stm32h743i-eval-u-boot.dtsi | 98 +++++++++++++++++++++++++++++
3 files changed, 201 insertions(+), 95 deletions(-)
diff --git a/arch/arm/dts/stm32h7-u-boot.dtsi b/arch/arm/dts/stm32h7-u-boot.dtsi
index 54dd406..84dc765 100644
--- a/arch/arm/dts/stm32h7-u-boot.dtsi
+++ b/arch/arm/dts/stm32h7-u-boot.dtsi
@@ -20,6 +20,7 @@
gpio9 = &gpioj;
gpio10 = &gpiok;
mmc0 = &sdmmc1;
+ pinctrl0 = &pinctrl;
};
soc {
@@ -36,30 +37,6 @@
pinctrl-0 = <&fmc_pins>;
pinctrl-names = "default";
status = "okay";
-
- /*
- * Memory configuration from sdram datasheet IS42S32800G-6BLI
- * first bank is bank at 0
- * second bank is bank at 1
- */
- bank1: bank at 1 {
- st,sdram-control = /bits/ 8 <NO_COL_9
- NO_ROW_12
- MWIDTH_32
- BANKS_4
- CAS_2
- SDCLK_3
- RD_BURST_EN
- RD_PIPE_DL_0>;
- st,sdram-timing = /bits/ 8 <TMRD_1
- TXSR_1
- TRAS_1
- TRC_6
- TRP_2
- TWR_1
- TRCD_1>;
- st,sdram-refcount = <1539>;
- };
};
};
};
@@ -136,77 +113,6 @@
compatible = "st,stm32-gpio";
};
-&pinctrl {
- fmc_pins: fmc at 0 {
- pins {
- pinmux = <STM32_PINMUX('D', 0, AF12)>,
- <STM32_PINMUX('D', 1, AF12)>,
- <STM32_PINMUX('D', 8, AF12)>,
- <STM32_PINMUX('D', 9, AF12)>,
- <STM32_PINMUX('D',10, AF12)>,
- <STM32_PINMUX('D',14, AF12)>,
- <STM32_PINMUX('D',15, AF12)>,
-
- <STM32_PINMUX('E', 0, AF12)>,
- <STM32_PINMUX('E', 1, AF12)>,
- <STM32_PINMUX('E', 7, AF12)>,
- <STM32_PINMUX('E', 8, AF12)>,
- <STM32_PINMUX('E', 9, AF12)>,
- <STM32_PINMUX('E',10, AF12)>,
- <STM32_PINMUX('E',11, AF12)>,
- <STM32_PINMUX('E',12, AF12)>,
- <STM32_PINMUX('E',13, AF12)>,
- <STM32_PINMUX('E',14, AF12)>,
- <STM32_PINMUX('E',15, AF12)>,
-
- <STM32_PINMUX('F', 0, AF12)>,
- <STM32_PINMUX('F', 1, AF12)>,
- <STM32_PINMUX('F', 2, AF12)>,
- <STM32_PINMUX('F', 3, AF12)>,
- <STM32_PINMUX('F', 4, AF12)>,
- <STM32_PINMUX('F', 5, AF12)>,
- <STM32_PINMUX('F',11, AF12)>,
- <STM32_PINMUX('F',12, AF12)>,
- <STM32_PINMUX('F',13, AF12)>,
- <STM32_PINMUX('F',14, AF12)>,
- <STM32_PINMUX('F',15, AF12)>,
-
- <STM32_PINMUX('G', 0, AF12)>,
- <STM32_PINMUX('G', 1, AF12)>,
- <STM32_PINMUX('G', 2, AF12)>,
- <STM32_PINMUX('G', 4, AF12)>,
- <STM32_PINMUX('G', 5, AF12)>,
- <STM32_PINMUX('G', 8, AF12)>,
- <STM32_PINMUX('G',15, AF12)>,
-
- <STM32_PINMUX('H', 5, AF12)>,
- <STM32_PINMUX('H', 6, AF12)>,
- <STM32_PINMUX('H', 7, AF12)>,
- <STM32_PINMUX('H', 8, AF12)>,
- <STM32_PINMUX('H', 9, AF12)>,
- <STM32_PINMUX('H',10, AF12)>,
- <STM32_PINMUX('H',11, AF12)>,
- <STM32_PINMUX('H',12, AF12)>,
- <STM32_PINMUX('H',13, AF12)>,
- <STM32_PINMUX('H',14, AF12)>,
- <STM32_PINMUX('H',15, AF12)>,
-
- <STM32_PINMUX('I', 0, AF12)>,
- <STM32_PINMUX('I', 1, AF12)>,
- <STM32_PINMUX('I', 2, AF12)>,
- <STM32_PINMUX('I', 3, AF12)>,
- <STM32_PINMUX('I', 4, AF12)>,
- <STM32_PINMUX('I', 5, AF12)>,
- <STM32_PINMUX('I', 6, AF12)>,
- <STM32_PINMUX('I', 7, AF12)>,
- <STM32_PINMUX('I', 9, AF12)>,
- <STM32_PINMUX('I',10, AF12)>;
-
- slew-rate = <3>;
- };
- };
-};
-
&pwrcfg {
u-boot,dm-pre-reloc;
};
@@ -222,3 +128,7 @@
&timer5 {
u-boot,dm-pre-reloc;
};
+
+&pinctrl {
+ u-boot,dm-pre-reloc;
+};
diff --git a/arch/arm/dts/stm32h743i-disco-u-boot.dtsi b/arch/arm/dts/stm32h743i-disco-u-boot.dtsi
index 5965afc..02e28c6 100644
--- a/arch/arm/dts/stm32h743i-disco-u-boot.dtsi
+++ b/arch/arm/dts/stm32h743i-disco-u-boot.dtsi
@@ -1,3 +1,101 @@
// SPDX-License-Identifier: GPL-2.0+
#include <stm32h7-u-boot.dtsi>
+
+&fmc {
+
+ /*
+ * Memory configuration from sdram datasheet IS42S32800G-6BLI
+ * first bank is bank at 0
+ * second bank is bank at 1
+ */
+ bank1: bank at 1 {
+ st,sdram-control = /bits/ 8 <NO_COL_9
+ NO_ROW_12
+ MWIDTH_32
+ BANKS_4
+ CAS_2
+ SDCLK_3
+ RD_BURST_EN
+ RD_PIPE_DL_0>;
+ st,sdram-timing = /bits/ 8 <TMRD_1
+ TXSR_1
+ TRAS_1
+ TRC_6
+ TRP_2
+ TWR_1
+ TRCD_1>;
+ st,sdram-refcount = <1539>;
+ };
+};
+
+&pinctrl {
+ fmc_pins: fmc at 0 {
+ pins {
+ pinmux = <STM32_PINMUX('D', 0, AF12)>,
+ <STM32_PINMUX('D', 1, AF12)>,
+ <STM32_PINMUX('D', 8, AF12)>,
+ <STM32_PINMUX('D', 9, AF12)>,
+ <STM32_PINMUX('D',10, AF12)>,
+ <STM32_PINMUX('D',14, AF12)>,
+ <STM32_PINMUX('D',15, AF12)>,
+
+ <STM32_PINMUX('E', 0, AF12)>,
+ <STM32_PINMUX('E', 1, AF12)>,
+ <STM32_PINMUX('E', 7, AF12)>,
+ <STM32_PINMUX('E', 8, AF12)>,
+ <STM32_PINMUX('E', 9, AF12)>,
+ <STM32_PINMUX('E',10, AF12)>,
+ <STM32_PINMUX('E',11, AF12)>,
+ <STM32_PINMUX('E',12, AF12)>,
+ <STM32_PINMUX('E',13, AF12)>,
+ <STM32_PINMUX('E',14, AF12)>,
+ <STM32_PINMUX('E',15, AF12)>,
+
+ <STM32_PINMUX('F', 0, AF12)>,
+ <STM32_PINMUX('F', 1, AF12)>,
+ <STM32_PINMUX('F', 2, AF12)>,
+ <STM32_PINMUX('F', 3, AF12)>,
+ <STM32_PINMUX('F', 4, AF12)>,
+ <STM32_PINMUX('F', 5, AF12)>,
+ <STM32_PINMUX('F',11, AF12)>,
+ <STM32_PINMUX('F',12, AF12)>,
+ <STM32_PINMUX('F',13, AF12)>,
+ <STM32_PINMUX('F',14, AF12)>,
+ <STM32_PINMUX('F',15, AF12)>,
+
+ <STM32_PINMUX('G', 0, AF12)>,
+ <STM32_PINMUX('G', 1, AF12)>,
+ <STM32_PINMUX('G', 2, AF12)>,
+ <STM32_PINMUX('G', 4, AF12)>,
+ <STM32_PINMUX('G', 5, AF12)>,
+ <STM32_PINMUX('G', 8, AF12)>,
+ <STM32_PINMUX('G',15, AF12)>,
+
+ <STM32_PINMUX('H', 5, AF12)>,
+ <STM32_PINMUX('H', 6, AF12)>,
+ <STM32_PINMUX('H', 7, AF12)>,
+ <STM32_PINMUX('H', 8, AF12)>,
+ <STM32_PINMUX('H', 9, AF12)>,
+ <STM32_PINMUX('H',10, AF12)>,
+ <STM32_PINMUX('H',11, AF12)>,
+ <STM32_PINMUX('H',12, AF12)>,
+ <STM32_PINMUX('H',13, AF12)>,
+ <STM32_PINMUX('H',14, AF12)>,
+ <STM32_PINMUX('H',15, AF12)>,
+
+ <STM32_PINMUX('I', 0, AF12)>,
+ <STM32_PINMUX('I', 1, AF12)>,
+ <STM32_PINMUX('I', 2, AF12)>,
+ <STM32_PINMUX('I', 3, AF12)>,
+ <STM32_PINMUX('I', 4, AF12)>,
+ <STM32_PINMUX('I', 5, AF12)>,
+ <STM32_PINMUX('I', 6, AF12)>,
+ <STM32_PINMUX('I', 7, AF12)>,
+ <STM32_PINMUX('I', 9, AF12)>,
+ <STM32_PINMUX('I',10, AF12)>;
+
+ slew-rate = <3>;
+ };
+ };
+};
diff --git a/arch/arm/dts/stm32h743i-eval-u-boot.dtsi b/arch/arm/dts/stm32h743i-eval-u-boot.dtsi
index 5965afc..02e28c6 100644
--- a/arch/arm/dts/stm32h743i-eval-u-boot.dtsi
+++ b/arch/arm/dts/stm32h743i-eval-u-boot.dtsi
@@ -1,3 +1,101 @@
// SPDX-License-Identifier: GPL-2.0+
#include <stm32h7-u-boot.dtsi>
+
+&fmc {
+
+ /*
+ * Memory configuration from sdram datasheet IS42S32800G-6BLI
+ * first bank is bank at 0
+ * second bank is bank at 1
+ */
+ bank1: bank at 1 {
+ st,sdram-control = /bits/ 8 <NO_COL_9
+ NO_ROW_12
+ MWIDTH_32
+ BANKS_4
+ CAS_2
+ SDCLK_3
+ RD_BURST_EN
+ RD_PIPE_DL_0>;
+ st,sdram-timing = /bits/ 8 <TMRD_1
+ TXSR_1
+ TRAS_1
+ TRC_6
+ TRP_2
+ TWR_1
+ TRCD_1>;
+ st,sdram-refcount = <1539>;
+ };
+};
+
+&pinctrl {
+ fmc_pins: fmc at 0 {
+ pins {
+ pinmux = <STM32_PINMUX('D', 0, AF12)>,
+ <STM32_PINMUX('D', 1, AF12)>,
+ <STM32_PINMUX('D', 8, AF12)>,
+ <STM32_PINMUX('D', 9, AF12)>,
+ <STM32_PINMUX('D',10, AF12)>,
+ <STM32_PINMUX('D',14, AF12)>,
+ <STM32_PINMUX('D',15, AF12)>,
+
+ <STM32_PINMUX('E', 0, AF12)>,
+ <STM32_PINMUX('E', 1, AF12)>,
+ <STM32_PINMUX('E', 7, AF12)>,
+ <STM32_PINMUX('E', 8, AF12)>,
+ <STM32_PINMUX('E', 9, AF12)>,
+ <STM32_PINMUX('E',10, AF12)>,
+ <STM32_PINMUX('E',11, AF12)>,
+ <STM32_PINMUX('E',12, AF12)>,
+ <STM32_PINMUX('E',13, AF12)>,
+ <STM32_PINMUX('E',14, AF12)>,
+ <STM32_PINMUX('E',15, AF12)>,
+
+ <STM32_PINMUX('F', 0, AF12)>,
+ <STM32_PINMUX('F', 1, AF12)>,
+ <STM32_PINMUX('F', 2, AF12)>,
+ <STM32_PINMUX('F', 3, AF12)>,
+ <STM32_PINMUX('F', 4, AF12)>,
+ <STM32_PINMUX('F', 5, AF12)>,
+ <STM32_PINMUX('F',11, AF12)>,
+ <STM32_PINMUX('F',12, AF12)>,
+ <STM32_PINMUX('F',13, AF12)>,
+ <STM32_PINMUX('F',14, AF12)>,
+ <STM32_PINMUX('F',15, AF12)>,
+
+ <STM32_PINMUX('G', 0, AF12)>,
+ <STM32_PINMUX('G', 1, AF12)>,
+ <STM32_PINMUX('G', 2, AF12)>,
+ <STM32_PINMUX('G', 4, AF12)>,
+ <STM32_PINMUX('G', 5, AF12)>,
+ <STM32_PINMUX('G', 8, AF12)>,
+ <STM32_PINMUX('G',15, AF12)>,
+
+ <STM32_PINMUX('H', 5, AF12)>,
+ <STM32_PINMUX('H', 6, AF12)>,
+ <STM32_PINMUX('H', 7, AF12)>,
+ <STM32_PINMUX('H', 8, AF12)>,
+ <STM32_PINMUX('H', 9, AF12)>,
+ <STM32_PINMUX('H',10, AF12)>,
+ <STM32_PINMUX('H',11, AF12)>,
+ <STM32_PINMUX('H',12, AF12)>,
+ <STM32_PINMUX('H',13, AF12)>,
+ <STM32_PINMUX('H',14, AF12)>,
+ <STM32_PINMUX('H',15, AF12)>,
+
+ <STM32_PINMUX('I', 0, AF12)>,
+ <STM32_PINMUX('I', 1, AF12)>,
+ <STM32_PINMUX('I', 2, AF12)>,
+ <STM32_PINMUX('I', 3, AF12)>,
+ <STM32_PINMUX('I', 4, AF12)>,
+ <STM32_PINMUX('I', 5, AF12)>,
+ <STM32_PINMUX('I', 6, AF12)>,
+ <STM32_PINMUX('I', 7, AF12)>,
+ <STM32_PINMUX('I', 9, AF12)>,
+ <STM32_PINMUX('I',10, AF12)>;
+
+ slew-rate = <3>;
+ };
+ };
+};
--
2.7.4
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v5 2/7] ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h750
2021-04-09 7:28 [PATCH v5 0/7] Add rt-thread art-pi board support dillon.minfei at gmail.com
2021-04-09 7:28 ` [PATCH v5 1/7] ARM: dts: stm32: split sdram pin & timing parameter into specific board dts dillon.minfei at gmail.com
@ 2021-04-09 7:28 ` dillon.minfei at gmail.com
2021-04-09 9:47 ` Patrice CHOTARD
2021-04-09 7:28 ` [PATCH v5 3/7] ARM: dts: stm32: add new instances for stm32h743 MCU dillon.minfei at gmail.com
` (4 subsequent siblings)
6 siblings, 1 reply; 15+ messages in thread
From: dillon.minfei at gmail.com @ 2021-04-09 7:28 UTC (permalink / raw)
To: u-boot
From: dillon min <dillon.minfei@gmail.com>
This patch is intend to add support stm32h750 value line,
just add stm32h7-pinctrl.dtsi for extending, with following changes:
- rename stm32h743-pinctrl.dtsi to stm32h7-pinctrl.dtsi
- move 'pin-controller' from stm32h7-pinctrl.dtsi to stm32h743.dtsi
- update stm32h743i-{disco, eval}.dts to include stm32h7-pinctrl.dtsi
Signed-off-by: dillon min <dillon.minfei@gmail.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
---
v5: no changes
arch/arm/dts/stm32h7-pinctrl.dtsi | 185 ++++++++++++++++++++++
arch/arm/dts/stm32h743-pinctrl.dtsi | 306 ------------------------------------
arch/arm/dts/stm32h743.dtsi | 142 +++++++++++++++++
arch/arm/dts/stm32h743i-disco.dts | 2 +-
arch/arm/dts/stm32h743i-eval.dts | 2 +-
5 files changed, 329 insertions(+), 308 deletions(-)
create mode 100644 arch/arm/dts/stm32h7-pinctrl.dtsi
delete mode 100644 arch/arm/dts/stm32h743-pinctrl.dtsi
diff --git a/arch/arm/dts/stm32h7-pinctrl.dtsi b/arch/arm/dts/stm32h7-pinctrl.dtsi
new file mode 100644
index 0000000..f6968b5
--- /dev/null
+++ b/arch/arm/dts/stm32h7-pinctrl.dtsi
@@ -0,0 +1,185 @@
+/*
+ * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+
+&pinctrl {
+
+ i2c1_pins_a: i2c1-0 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 6, AF4)>, /* I2C1_SCL */
+ <STM32_PINMUX('B', 7, AF4)>; /* I2C1_SDA */
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
+ ethernet_rmii: rmii-0 {
+ pins {
+ pinmux = <STM32_PINMUX('G', 11, AF11)>,
+ <STM32_PINMUX('G', 13, AF11)>,
+ <STM32_PINMUX('G', 12, AF11)>,
+ <STM32_PINMUX('C', 4, AF11)>,
+ <STM32_PINMUX('C', 5, AF11)>,
+ <STM32_PINMUX('A', 7, AF11)>,
+ <STM32_PINMUX('C', 1, AF11)>,
+ <STM32_PINMUX('A', 2, AF11)>,
+ <STM32_PINMUX('A', 1, AF11)>;
+ slew-rate = <2>;
+ };
+ };
+
+ sdmmc1_b4_pins_a: sdmmc1-b4-0 {
+ pins {
+ pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+ <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+ <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+ <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
+ <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1_CK */
+ <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+ slew-rate = <3>;
+ drive-push-pull;
+ bias-disable;
+ };
+ };
+
+ sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+ <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+ <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+ <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
+ <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
+ slew-rate = <3>;
+ drive-push-pull;
+ bias-disable;
+ };
+ pins2{
+ pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+ slew-rate = <3>;
+ drive-open-drain;
+ bias-disable;
+ };
+ };
+
+ sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */
+ <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */
+ <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */
+ <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */
+ <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */
+ <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */
+ };
+ };
+
+ sdmmc1_dir_pins_a: sdmmc1-dir-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('C', 6, AF8)>, /* SDMMC1_D0DIR */
+ <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
+ <STM32_PINMUX('B', 9, AF7)>; /* SDMMC1_CDIR */
+ slew-rate = <3>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ pins2{
+ pinmux = <STM32_PINMUX('B', 8, AF7)>; /* SDMMC1_CKIN */
+ bias-pull-up;
+ };
+ };
+
+ sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC1_D0DIR */
+ <STM32_PINMUX('C', 7, ANALOG)>, /* SDMMC1_D123DIR */
+ <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */
+ <STM32_PINMUX('B', 8, ANALOG)>; /* SDMMC1_CKIN */
+ };
+ };
+
+ usart1_pins: usart1-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 14, AF4)>; /* USART1_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 15, AF4)>; /* USART1_RX */
+ bias-disable;
+ };
+ };
+
+ usart2_pins: usart2-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('D', 5, AF7)>; /* USART2_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('D', 6, AF7)>; /* USART2_RX */
+ bias-disable;
+ };
+ };
+
+ usbotg_hs_pins_a: usbotg-hs-0 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 4, AF10)>, /* ULPI_NXT */
+ <STM32_PINMUX('I', 11, AF10)>, /* ULPI_DIR> */
+ <STM32_PINMUX('C', 0, AF10)>, /* ULPI_STP> */
+ <STM32_PINMUX('A', 5, AF10)>, /* ULPI_CK> */
+ <STM32_PINMUX('A', 3, AF10)>, /* ULPI_D0> */
+ <STM32_PINMUX('B', 0, AF10)>, /* ULPI_D1> */
+ <STM32_PINMUX('B', 1, AF10)>, /* ULPI_D2> */
+ <STM32_PINMUX('B', 10, AF10)>, /* ULPI_D3> */
+ <STM32_PINMUX('B', 11, AF10)>, /* ULPI_D4> */
+ <STM32_PINMUX('B', 12, AF10)>, /* ULPI_D5> */
+ <STM32_PINMUX('B', 13, AF10)>, /* ULPI_D6> */
+ <STM32_PINMUX('B', 5, AF10)>; /* ULPI_D7> */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <2>;
+ };
+ };
+};
diff --git a/arch/arm/dts/stm32h743-pinctrl.dtsi b/arch/arm/dts/stm32h743-pinctrl.dtsi
deleted file mode 100644
index 141083f..0000000
--- a/arch/arm/dts/stm32h743-pinctrl.dtsi
+++ /dev/null
@@ -1,306 +0,0 @@
-/*
- * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/pinctrl/stm32-pinfunc.h>
-
-/ {
- soc {
- pinctrl: pin-controller {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "st,stm32h743-pinctrl";
- ranges = <0 0x58020000 0x3000>;
- interrupt-parent = <&exti>;
- st,syscfg = <&syscfg 0x8>;
- pins-are-numbered;
-
- gpioa: gpio at 58020000 {
- gpio-controller;
- #gpio-cells = <2>;
- reg = <0x0 0x400>;
- clocks = <&rcc GPIOA_CK>;
- st,bank-name = "GPIOA";
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpiob: gpio at 58020400 {
- gpio-controller;
- #gpio-cells = <2>;
- reg = <0x400 0x400>;
- clocks = <&rcc GPIOB_CK>;
- st,bank-name = "GPIOB";
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpioc: gpio at 58020800 {
- gpio-controller;
- #gpio-cells = <2>;
- reg = <0x800 0x400>;
- clocks = <&rcc GPIOC_CK>;
- st,bank-name = "GPIOC";
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpiod: gpio at 58020c00 {
- gpio-controller;
- #gpio-cells = <2>;
- reg = <0xc00 0x400>;
- clocks = <&rcc GPIOD_CK>;
- st,bank-name = "GPIOD";
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpioe: gpio at 58021000 {
- gpio-controller;
- #gpio-cells = <2>;
- reg = <0x1000 0x400>;
- clocks = <&rcc GPIOE_CK>;
- st,bank-name = "GPIOE";
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpiof: gpio at 58021400 {
- gpio-controller;
- #gpio-cells = <2>;
- reg = <0x1400 0x400>;
- clocks = <&rcc GPIOF_CK>;
- st,bank-name = "GPIOF";
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpiog: gpio at 58021800 {
- gpio-controller;
- #gpio-cells = <2>;
- reg = <0x1800 0x400>;
- clocks = <&rcc GPIOG_CK>;
- st,bank-name = "GPIOG";
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpioh: gpio at 58021c00 {
- gpio-controller;
- #gpio-cells = <2>;
- reg = <0x1c00 0x400>;
- clocks = <&rcc GPIOH_CK>;
- st,bank-name = "GPIOH";
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpioi: gpio at 58022000 {
- gpio-controller;
- #gpio-cells = <2>;
- reg = <0x2000 0x400>;
- clocks = <&rcc GPIOI_CK>;
- st,bank-name = "GPIOI";
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpioj: gpio at 58022400 {
- gpio-controller;
- #gpio-cells = <2>;
- reg = <0x2400 0x400>;
- clocks = <&rcc GPIOJ_CK>;
- st,bank-name = "GPIOJ";
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpiok: gpio at 58022800 {
- gpio-controller;
- #gpio-cells = <2>;
- reg = <0x2800 0x400>;
- clocks = <&rcc GPIOK_CK>;
- st,bank-name = "GPIOK";
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- i2c1_pins_a: i2c1-0 {
- pins {
- pinmux = <STM32_PINMUX('B', 6, AF4)>, /* I2C1_SCL */
- <STM32_PINMUX('B', 7, AF4)>; /* I2C1_SDA */
- bias-disable;
- drive-open-drain;
- slew-rate = <0>;
- };
- };
-
- ethernet_rmii: rmii-0 {
- pins {
- pinmux = <STM32_PINMUX('G', 11, AF11)>,
- <STM32_PINMUX('G', 13, AF11)>,
- <STM32_PINMUX('G', 12, AF11)>,
- <STM32_PINMUX('C', 4, AF11)>,
- <STM32_PINMUX('C', 5, AF11)>,
- <STM32_PINMUX('A', 7, AF11)>,
- <STM32_PINMUX('C', 1, AF11)>,
- <STM32_PINMUX('A', 2, AF11)>,
- <STM32_PINMUX('A', 1, AF11)>;
- slew-rate = <2>;
- };
- };
-
- sdmmc1_b4_pins_a: sdmmc1-b4-0 {
- pins {
- pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
- <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
- <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
- <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
- <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1_CK */
- <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
- slew-rate = <3>;
- drive-push-pull;
- bias-disable;
- };
- };
-
- sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 {
- pins1 {
- pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
- <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
- <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
- <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
- <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
- slew-rate = <3>;
- drive-push-pull;
- bias-disable;
- };
- pins2{
- pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
- slew-rate = <3>;
- drive-open-drain;
- bias-disable;
- };
- };
-
- sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 {
- pins {
- pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */
- <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */
- <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */
- <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */
- <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */
- <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */
- };
- };
-
- sdmmc1_dir_pins_a: sdmmc1-dir-0 {
- pins1 {
- pinmux = <STM32_PINMUX('C', 6, AF8)>, /* SDMMC1_D0DIR */
- <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
- <STM32_PINMUX('B', 9, AF7)>; /* SDMMC1_CDIR */
- slew-rate = <3>;
- drive-push-pull;
- bias-pull-up;
- };
- pins2{
- pinmux = <STM32_PINMUX('B', 8, AF7)>; /* SDMMC1_CKIN */
- bias-pull-up;
- };
- };
-
- sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 {
- pins {
- pinmux = <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC1_D0DIR */
- <STM32_PINMUX('C', 7, ANALOG)>, /* SDMMC1_D123DIR */
- <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */
- <STM32_PINMUX('B', 8, ANALOG)>; /* SDMMC1_CKIN */
- };
- };
-
- usart1_pins: usart1-0 {
- pins1 {
- pinmux = <STM32_PINMUX('B', 14, AF4)>; /* USART1_TX */
- bias-disable;
- drive-push-pull;
- slew-rate = <0>;
- };
- pins2 {
- pinmux = <STM32_PINMUX('B', 15, AF4)>; /* USART1_RX */
- bias-disable;
- };
- };
-
- usart2_pins: usart2-0 {
- pins1 {
- pinmux = <STM32_PINMUX('D', 5, AF7)>; /* USART2_TX */
- bias-disable;
- drive-push-pull;
- slew-rate = <0>;
- };
- pins2 {
- pinmux = <STM32_PINMUX('D', 6, AF7)>; /* USART2_RX */
- bias-disable;
- };
- };
-
- usbotg_hs_pins_a: usbotg-hs-0 {
- pins {
- pinmux = <STM32_PINMUX('H', 4, AF10)>, /* ULPI_NXT */
- <STM32_PINMUX('I', 11, AF10)>, /* ULPI_DIR> */
- <STM32_PINMUX('C', 0, AF10)>, /* ULPI_STP> */
- <STM32_PINMUX('A', 5, AF10)>, /* ULPI_CK> */
- <STM32_PINMUX('A', 3, AF10)>, /* ULPI_D0> */
- <STM32_PINMUX('B', 0, AF10)>, /* ULPI_D1> */
- <STM32_PINMUX('B', 1, AF10)>, /* ULPI_D2> */
- <STM32_PINMUX('B', 10, AF10)>, /* ULPI_D3> */
- <STM32_PINMUX('B', 11, AF10)>, /* ULPI_D4> */
- <STM32_PINMUX('B', 12, AF10)>, /* ULPI_D5> */
- <STM32_PINMUX('B', 13, AF10)>, /* ULPI_D6> */
- <STM32_PINMUX('B', 5, AF10)>; /* ULPI_D7> */
- bias-disable;
- drive-push-pull;
- slew-rate = <2>;
- };
- };
- };
- };
-};
diff --git a/arch/arm/dts/stm32h743.dtsi b/arch/arm/dts/stm32h743.dtsi
index e4e4723..8c96698 100644
--- a/arch/arm/dts/stm32h743.dtsi
+++ b/arch/arm/dts/stm32h743.dtsi
@@ -519,6 +519,148 @@
snps,pbl = <8>;
status = "disabled";
};
+
+ pinctrl: pin-controller at 58020000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stm32h743-pinctrl";
+ ranges = <0 0x58020000 0x3000>;
+ interrupt-parent = <&exti>;
+ st,syscfg = <&syscfg 0x8>;
+ pins-are-numbered;
+
+ gpioa: gpio at 58020000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x0 0x400>;
+ clocks = <&rcc GPIOA_CK>;
+ st,bank-name = "GPIOA";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 0 16>;
+ };
+
+ gpiob: gpio at 58020400 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x400 0x400>;
+ clocks = <&rcc GPIOB_CK>;
+ st,bank-name = "GPIOB";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 16 16>;
+ };
+
+ gpioc: gpio at 58020800 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x800 0x400>;
+ clocks = <&rcc GPIOC_CK>;
+ st,bank-name = "GPIOC";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 32 16>;
+ };
+
+ gpiod: gpio at 58020c00 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0xc00 0x400>;
+ clocks = <&rcc GPIOD_CK>;
+ st,bank-name = "GPIOD";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 48 16>;
+ };
+
+ gpioe: gpio at 58021000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x1000 0x400>;
+ clocks = <&rcc GPIOE_CK>;
+ st,bank-name = "GPIOE";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 64 16>;
+ };
+
+ gpiof: gpio at 58021400 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x1400 0x400>;
+ clocks = <&rcc GPIOF_CK>;
+ st,bank-name = "GPIOF";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 80 16>;
+ };
+
+ gpiog: gpio at 58021800 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x1800 0x400>;
+ clocks = <&rcc GPIOG_CK>;
+ st,bank-name = "GPIOG";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 96 16>;
+ };
+
+ gpioh: gpio at 58021c00 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x1c00 0x400>;
+ clocks = <&rcc GPIOH_CK>;
+ st,bank-name = "GPIOH";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 112 16>;
+ };
+
+ gpioi: gpio at 58022000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x2000 0x400>;
+ clocks = <&rcc GPIOI_CK>;
+ st,bank-name = "GPIOI";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 128 16>;
+ };
+
+ gpioj: gpio at 58022400 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x2400 0x400>;
+ clocks = <&rcc GPIOJ_CK>;
+ st,bank-name = "GPIOJ";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 144 16>;
+ };
+
+ gpiok: gpio at 58022800 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x2800 0x400>;
+ clocks = <&rcc GPIOK_CK>;
+ st,bank-name = "GPIOK";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ ngpios = <8>;
+ gpio-ranges = <&pinctrl 0 160 8>;
+ };
+ };
};
};
diff --git a/arch/arm/dts/stm32h743i-disco.dts b/arch/arm/dts/stm32h743i-disco.dts
index 7927310..3a01ebd 100644
--- a/arch/arm/dts/stm32h743i-disco.dts
+++ b/arch/arm/dts/stm32h743i-disco.dts
@@ -6,7 +6,7 @@
/dts-v1/;
#include "stm32h743.dtsi"
-#include "stm32h743-pinctrl.dtsi"
+#include "stm32h7-pinctrl.dtsi"
/ {
model = "STMicroelectronics STM32H743i-Discovery board";
diff --git a/arch/arm/dts/stm32h743i-eval.dts b/arch/arm/dts/stm32h743i-eval.dts
index 8f39817..38cc7fa 100644
--- a/arch/arm/dts/stm32h743i-eval.dts
+++ b/arch/arm/dts/stm32h743i-eval.dts
@@ -42,7 +42,7 @@
/dts-v1/;
#include "stm32h743.dtsi"
-#include "stm32h743-pinctrl.dtsi"
+#include "stm32h7-pinctrl.dtsi"
/ {
model = "STMicroelectronics STM32H743i-EVAL board";
--
2.7.4
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v5 3/7] ARM: dts: stm32: add new instances for stm32h743 MCU
2021-04-09 7:28 [PATCH v5 0/7] Add rt-thread art-pi board support dillon.minfei at gmail.com
2021-04-09 7:28 ` [PATCH v5 1/7] ARM: dts: stm32: split sdram pin & timing parameter into specific board dts dillon.minfei at gmail.com
2021-04-09 7:28 ` [PATCH v5 2/7] ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h750 dillon.minfei at gmail.com
@ 2021-04-09 7:28 ` dillon.minfei at gmail.com
2021-04-09 9:47 ` Patrice CHOTARD
2021-04-09 7:28 ` [PATCH v5 4/7] ARM: dts: stm32: fix i2c node typo in stm32h743, update dmamux1 register dillon.minfei at gmail.com
` (3 subsequent siblings)
6 siblings, 1 reply; 15+ messages in thread
From: dillon.minfei at gmail.com @ 2021-04-09 7:28 UTC (permalink / raw)
To: u-boot
From: dillon min <dillon.minfei@gmail.com>
Some instances are missing in current support of stm32h743 MCU. This commit
adds usart3/uart4 and sdmmc2 support.
Signed-off-by: dillon min <dillon.minfei@gmail.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
---
v5: no changes
arch/arm/dts/stm32h743.dtsi | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/arch/arm/dts/stm32h743.dtsi b/arch/arm/dts/stm32h743.dtsi
index 8c96698..77a8aef 100644
--- a/arch/arm/dts/stm32h743.dtsi
+++ b/arch/arm/dts/stm32h743.dtsi
@@ -99,6 +99,22 @@
clocks = <&rcc USART2_CK>;
};
+ usart3: serial at 40004800 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x40004800 0x400>;
+ interrupts = <39>;
+ status = "disabled";
+ clocks = <&rcc USART3_CK>;
+ };
+
+ uart4: serial at 40004c00 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x40004c00 0x400>;
+ interrupts = <52>;
+ status = "disabled";
+ clocks = <&rcc UART4_CK>;
+ };
+
i2c1: i2c at 40005400 {
compatible = "st,stm32f7-i2c";
#address-cells = <1>;
@@ -332,6 +348,20 @@
max-frequency = <120000000>;
};
+ sdmmc2: sdmmc at 48022400 {
+ compatible = "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x10153180>;
+ reg = <0x48022400 0x400>;
+ interrupts = <124>;
+ interrupt-names = "cmd_irq";
+ clocks = <&rcc SDMMC2_CK>;
+ clock-names = "apb_pclk";
+ resets = <&rcc STM32H7_AHB2_RESET(SDMMC2)>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <120000000>;
+ };
+
exti: interrupt-controller at 58000000 {
compatible = "st,stm32h7-exti";
interrupt-controller;
--
2.7.4
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v5 4/7] ARM: dts: stm32: fix i2c node typo in stm32h743, update dmamux1 register
2021-04-09 7:28 [PATCH v5 0/7] Add rt-thread art-pi board support dillon.minfei at gmail.com
` (2 preceding siblings ...)
2021-04-09 7:28 ` [PATCH v5 3/7] ARM: dts: stm32: add new instances for stm32h743 MCU dillon.minfei at gmail.com
@ 2021-04-09 7:28 ` dillon.minfei at gmail.com
2021-04-09 9:47 ` Patrice CHOTARD
2021-04-09 7:28 ` [PATCH v5 5/7] ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6 dillon.minfei at gmail.com
` (2 subsequent siblings)
6 siblings, 1 reply; 15+ messages in thread
From: dillon.minfei at gmail.com @ 2021-04-09 7:28 UTC (permalink / raw)
To: u-boot
From: dillon min <dillon.minfei@gmail.com>
Replace upper case by lower case in i2c nodes name.
update dmamux1 register range.
Signed-off-by: dillon min <dillon.minfei@gmail.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
---
v5: no changes
arch/arm/dts/stm32h743.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/dts/stm32h743.dtsi b/arch/arm/dts/stm32h743.dtsi
index 77a8aef..ed68575 100644
--- a/arch/arm/dts/stm32h743.dtsi
+++ b/arch/arm/dts/stm32h743.dtsi
@@ -139,7 +139,7 @@
status = "disabled";
};
- i2c3: i2c at 40005C00 {
+ i2c3: i2c at 40005c00 {
compatible = "st,stm32f7-i2c";
#address-cells = <1>;
#size-cells = <0>;
@@ -254,7 +254,7 @@
dmamux1: dma-router at 40020800 {
compatible = "st,stm32h7-dmamux";
- reg = <0x40020800 0x1c>;
+ reg = <0x40020800 0x40>;
#dma-cells = <3>;
dma-channels = <16>;
dma-requests = <128>;
@@ -386,7 +386,7 @@
status = "disabled";
};
- i2c4: i2c at 58001C00 {
+ i2c4: i2c at 58001c00 {
compatible = "st,stm32f7-i2c";
#address-cells = <1>;
#size-cells = <0>;
--
2.7.4
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v5 5/7] ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6
2021-04-09 7:28 [PATCH v5 0/7] Add rt-thread art-pi board support dillon.minfei at gmail.com
` (3 preceding siblings ...)
2021-04-09 7:28 ` [PATCH v5 4/7] ARM: dts: stm32: fix i2c node typo in stm32h743, update dmamux1 register dillon.minfei at gmail.com
@ 2021-04-09 7:28 ` dillon.minfei at gmail.com
2021-04-09 9:47 ` Patrice CHOTARD
2021-04-09 7:28 ` [PATCH v5 6/7] ram: stm32: fix strsep failed on read only memory dillon.minfei at gmail.com
2021-04-09 7:28 ` [PATCH v5 7/7] board: Add rt-thread art-pi board support dillon.minfei at gmail.com
6 siblings, 1 reply; 15+ messages in thread
From: dillon.minfei at gmail.com @ 2021-04-09 7:28 UTC (permalink / raw)
To: u-boot
From: dillon min <dillon.minfei@gmail.com>
This patchset has following changes:
- introduce stm32h750.dtsi to support stm32h750 value line
- add pin groups for usart3/uart4/spi1/sdmmc2
- add stm32h750i-art-pi.dtb (arch/arm/boot/dts/Makefile)
- add stm32h750i-art-pi.dts to support art-pi board
- add stm32h750i-art-pi-u-boot.dtsi to support art-pi board (u-boot)
art-pi board component:
- 8MiB qspi flash
- 16MiB spi flash
- 32MiB sdram
- ap6212 wifi&bt&fm
the detail board information can be found at:
https://art-pi.gitee.io/website/
Signed-off-by: dillon min <dillon.minfei@gmail.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
---
v5: no changes
arch/arm/dts/Makefile | 3 +-
arch/arm/dts/stm32h7-pinctrl.dtsi | 89 ++++++++++++++
arch/arm/dts/stm32h750.dtsi | 5 +
arch/arm/dts/stm32h750i-art-pi-u-boot.dtsi | 81 +++++++++++++
arch/arm/dts/stm32h750i-art-pi.dts | 188 +++++++++++++++++++++++++++++
include/dt-bindings/memory/stm32-sdram.h | 2 +
6 files changed, 367 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/dts/stm32h750.dtsi
create mode 100644 arch/arm/dts/stm32h750i-art-pi-u-boot.dtsi
create mode 100644 arch/arm/dts/stm32h750i-art-pi.dts
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index c671082..0f54801 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -454,7 +454,8 @@ dtb-$(CONFIG_STM32F7) += stm32f746-disco.dtb \
stm32f769-disco.dtb \
stm32746g-eval.dtb
dtb-$(CONFIG_STM32H7) += stm32h743i-disco.dtb \
- stm32h743i-eval.dtb
+ stm32h743i-eval.dtb \
+ stm32h750i-art-pi.dtb
dtb-$(CONFIG_MACH_SUN4I) += \
sun4i-a10-a1000.dtb \
diff --git a/arch/arm/dts/stm32h7-pinctrl.dtsi b/arch/arm/dts/stm32h7-pinctrl.dtsi
index f6968b5..aefa324 100644
--- a/arch/arm/dts/stm32h7-pinctrl.dtsi
+++ b/arch/arm/dts/stm32h7-pinctrl.dtsi
@@ -137,6 +137,80 @@
};
};
+ sdmmc2_b4_pins_a: sdmmc2-b4-0 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC1_D0 */
+ <STM32_PINMUX('B', 15, AF9)>, /* SDMMC1_D1 */
+ <STM32_PINMUX('B', 3, AF9)>, /* SDMMC1_D2 */
+ <STM32_PINMUX('B', 4, AF9)>, /* SDMMC1_D3 */
+ <STM32_PINMUX('D', 6, AF11)>, /* SDMMC1_CK */
+ <STM32_PINMUX('D', 7, AF11)>; /* SDMMC1_CMD */
+ slew-rate = <3>;
+ drive-push-pull;
+ bias-disable;
+ };
+ };
+
+ sdmmc2_b4_od_pins_a: sdmmc2-b4-od-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+ <STM32_PINMUX('B', 15, AF9)>, /* SDMMC1_D1 */
+ <STM32_PINMUX('B', 3, AF9)>, /* SDMMC1_D2 */
+ <STM32_PINMUX('B', 4, AF9)>, /* SDMMC1_D3 */
+ <STM32_PINMUX('D', 6, AF11)>; /* SDMMC1_CK */
+ slew-rate = <3>;
+ drive-push-pull;
+ bias-disable;
+ };
+ pins2{
+ pinmux = <STM32_PINMUX('D', 7, AF11)>; /* SDMMC1_CMD */
+ slew-rate = <3>;
+ drive-open-drain;
+ bias-disable;
+ };
+ };
+
+ sdmmc2_b4_sleep_pins_a: sdmmc2-b4-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC1_D0 */
+ <STM32_PINMUX('B', 15, ANALOG)>, /* SDMMC1_D1 */
+ <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC1_D2 */
+ <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC1_D3 */
+ <STM32_PINMUX('D', 6, ANALOG)>, /* SDMMC1_CK */
+ <STM32_PINMUX('D', 7, ANALOG)>; /* SDMMC1_CMD */
+ };
+ };
+
+ spi1_pins: spi1-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('A', 5, AF5)>,
+ /* SPI1_CLK */
+ <STM32_PINMUX('B', 5, AF5)>;
+ /* SPI1_MOSI */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <2>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('G', 9, AF5)>;
+ /* SPI1_MISO */
+ bias-disable;
+ };
+ };
+
+ uart4_pins: uart4-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('A', 0, AF8)>; /* UART4_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('I', 9, AF8)>; /* UART4_RX */
+ bias-disable;
+ };
+ };
+
usart1_pins: usart1-0 {
pins1 {
pinmux = <STM32_PINMUX('B', 14, AF4)>; /* USART1_TX */
@@ -163,6 +237,21 @@
};
};
+ usart3_pins: usart3-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
+ <STM32_PINMUX('D', 12, AF7)>; /* USART3_RTS_DE */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 11, AF7)>, /* USART3_RX */
+ <STM32_PINMUX('D', 11, AF7)>; /* USART3_CTS_NSS */
+ bias-disable;
+ };
+ };
+
usbotg_hs_pins_a: usbotg-hs-0 {
pins {
pinmux = <STM32_PINMUX('H', 4, AF10)>, /* ULPI_NXT */
diff --git a/arch/arm/dts/stm32h750.dtsi b/arch/arm/dts/stm32h750.dtsi
new file mode 100644
index 0000000..99533f3
--- /dev/null
+++ b/arch/arm/dts/stm32h750.dtsi
@@ -0,0 +1,5 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/* Copyright (C) STMicroelectronics 2021 - All Rights Reserved */
+
+#include "stm32h743.dtsi"
+
diff --git a/arch/arm/dts/stm32h750i-art-pi-u-boot.dtsi b/arch/arm/dts/stm32h750i-art-pi-u-boot.dtsi
new file mode 100644
index 0000000..326a553
--- /dev/null
+++ b/arch/arm/dts/stm32h750i-art-pi-u-boot.dtsi
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <stm32h7-u-boot.dtsi>
+
+&fmc {
+ /*
+ * Memory configuration from sdram datasheet W9825G6KH
+ * first bank is bank at 0
+ * second bank is bank at 1
+ */
+ bank1: bank at 0 {
+ st,sdram-control = /bits/ 8 <NO_COL_9
+ NO_ROW_13
+ MWIDTH_16
+ BANKS_4
+ CAS_2
+ SDCLK_3
+ RD_BURST_EN
+ RD_PIPE_DL_0>;
+ st,sdram-timing = /bits/ 8 <TMRD_2
+ TXSR_6
+ TRAS_6
+ TRC_6
+ TRP_2
+ TWR_2
+ TRCD_2>;
+ st,sdram-refcount = <677>;
+ };
+};
+
+&pinctrl {
+ fmc_pins: fmc at 0 {
+ pins {
+ pinmux = <STM32_PINMUX('D', 0, AF12)>,
+ <STM32_PINMUX('D', 1, AF12)>,
+ <STM32_PINMUX('D', 8, AF12)>,
+ <STM32_PINMUX('D', 9, AF12)>,
+ <STM32_PINMUX('D',10, AF12)>,
+ <STM32_PINMUX('D',14, AF12)>,
+ <STM32_PINMUX('D',15, AF12)>,
+
+ <STM32_PINMUX('E', 0, AF12)>,
+ <STM32_PINMUX('E', 1, AF12)>,
+ <STM32_PINMUX('E', 7, AF12)>,
+ <STM32_PINMUX('E', 8, AF12)>,
+ <STM32_PINMUX('E', 9, AF12)>,
+ <STM32_PINMUX('E',10, AF12)>,
+ <STM32_PINMUX('E',11, AF12)>,
+ <STM32_PINMUX('E',12, AF12)>,
+ <STM32_PINMUX('E',13, AF12)>,
+ <STM32_PINMUX('E',14, AF12)>,
+ <STM32_PINMUX('E',15, AF12)>,
+
+ <STM32_PINMUX('F', 0, AF12)>,
+ <STM32_PINMUX('F', 1, AF12)>,
+ <STM32_PINMUX('F', 2, AF12)>,
+ <STM32_PINMUX('F', 3, AF12)>,
+ <STM32_PINMUX('F', 4, AF12)>,
+ <STM32_PINMUX('F', 5, AF12)>,
+ <STM32_PINMUX('F',11, AF12)>,
+ <STM32_PINMUX('F',12, AF12)>,
+ <STM32_PINMUX('F',13, AF12)>,
+ <STM32_PINMUX('F',14, AF12)>,
+ <STM32_PINMUX('F',15, AF12)>,
+
+ <STM32_PINMUX('G', 0, AF12)>,
+ <STM32_PINMUX('G', 1, AF12)>,
+ <STM32_PINMUX('G', 2, AF12)>,
+ <STM32_PINMUX('G', 4, AF12)>,
+ <STM32_PINMUX('G', 5, AF12)>,
+ <STM32_PINMUX('G', 8, AF12)>,
+ <STM32_PINMUX('G',15, AF12)>,
+
+ <STM32_PINMUX('H', 5, AF12)>,
+ <STM32_PINMUX('C', 2, AF12)>,
+ <STM32_PINMUX('C', 3, AF12)>;
+
+ slew-rate = <3>;
+ };
+ };
+};
diff --git a/arch/arm/dts/stm32h750i-art-pi.dts b/arch/arm/dts/stm32h750i-art-pi.dts
new file mode 100644
index 0000000..2a4d1cb
--- /dev/null
+++ b/arch/arm/dts/stm32h750i-art-pi.dts
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Copyright 2021 - Dillon Min <dillon.minfei@gmail.com>
+ *
+ */
+
+/dts-v1/;
+#include "stm32h750.dtsi"
+#include "stm32h7-pinctrl.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "RT-Thread STM32H750i-ART-PI board";
+ compatible = "st,stm32h750i-art-pi", "st,stm32h750";
+
+ chosen {
+ bootargs = "root=/dev/ram";
+ stdout-path = "serial0:2000000n8";
+ };
+
+ memory at c0000000 {
+ device_type = "memory";
+ reg = <0xc0000000 0x2000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ linux,cma {
+ compatible = "shared-dma-pool";
+ no-map;
+ size = <0x100000>;
+ linux,dma-default;
+ };
+ };
+
+ aliases {
+ serial0 = &uart4;
+ serial1 = &usart3;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led-red {
+ gpios = <&gpioi 8 0>;
+ };
+ led-green {
+ gpios = <&gpioc 15 0>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ v3v3: regulator-v3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "v3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ wlan_pwr: regulator-wlan {
+ compatible = "regulator-fixed";
+
+ regulator-name = "wl-reg";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpioc 13 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&clk_hse {
+ clock-frequency = <25000000>;
+};
+
+&dma1 {
+ status = "okay";
+};
+
+&dma2 {
+ status = "okay";
+};
+
+&mac {
+ status = "disabled";
+ pinctrl-0 = <ðernet_rmii>;
+ pinctrl-names = "default";
+ phy-mode = "rmii";
+ phy-handle = <&phy0>;
+
+ mdio0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ phy0: ethernet-phy at 0 {
+ reg = <0>;
+ };
+ };
+};
+
+&sdmmc1 {
+ pinctrl-names = "default", "opendrain", "sleep";
+ pinctrl-0 = <&sdmmc1_b4_pins_a>;
+ pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+ pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+ broken-cd;
+ st,neg-edge;
+ bus-width = <4>;
+ vmmc-supply = <&v3v3>;
+ status = "okay";
+};
+
+&sdmmc2 {
+ pinctrl-names = "default", "opendrain", "sleep";
+ pinctrl-0 = <&sdmmc2_b4_pins_a>;
+ pinctrl-1 = <&sdmmc2_b4_od_pins_a>;
+ pinctrl-2 = <&sdmmc2_b4_sleep_pins_a>;
+ broken-cd;
+ non-removable;
+ st,neg-edge;
+ bus-width = <4>;
+ vmmc-supply = <&wlan_pwr>;
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ brcmf: bcrmf at 1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ };
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-0 = <&spi1_pins>;
+ pinctrl-names = "default";
+ cs-gpios = <&gpioa 4 GPIO_ACTIVE_LOW>;
+ dmas = <&dmamux1 37 0x400 0x05>,
+ <&dmamux1 38 0x400 0x05>;
+ dma-names = "rx", "tx";
+
+ flash at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "winbond,w25q128", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <80000000>;
+
+ partition at 0 {
+ label = "root filesystem";
+ reg = <0 0x1000000>;
+ };
+ };
+};
+
+&usart2 {
+ pinctrl-0 = <&usart2_pins>;
+ pinctrl-names = "default";
+ status = "disabled";
+};
+
+&usart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usart3_pins>;
+ dmas = <&dmamux1 45 0x400 0x05>,
+ <&dmamux1 46 0x400 0x05>;
+ dma-names = "rx", "tx";
+ st,hw-flow-ctrl;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ host-wakeup-gpios = <&gpioc 0 GPIO_ACTIVE_HIGH>;
+ device-wakeup-gpios = <&gpioi 10 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpioi 11 GPIO_ACTIVE_HIGH>;
+ max-speed = <115200>;
+ };
+};
+
+&uart4 {
+ pinctrl-0 = <&uart4_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
diff --git a/include/dt-bindings/memory/stm32-sdram.h b/include/dt-bindings/memory/stm32-sdram.h
index ab91d2b..90ef2e1 100644
--- a/include/dt-bindings/memory/stm32-sdram.h
+++ b/include/dt-bindings/memory/stm32-sdram.h
@@ -34,8 +34,10 @@
#define TXSR_1 (1 - 1)
#define TXSR_6 (6 - 1)
#define TXSR_7 (7 - 1)
+#define TXSR_8 (8 - 1)
#define TRAS_1 (1 - 1)
#define TRAS_4 (4 - 1)
+#define TRAS_6 (6 - 1)
#define TRC_6 (6 - 1)
#define TWR_1 (1 - 1)
#define TWR_2 (2 - 1)
--
2.7.4
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v5 6/7] ram: stm32: fix strsep failed on read only memory
2021-04-09 7:28 [PATCH v5 0/7] Add rt-thread art-pi board support dillon.minfei at gmail.com
` (4 preceding siblings ...)
2021-04-09 7:28 ` [PATCH v5 5/7] ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6 dillon.minfei at gmail.com
@ 2021-04-09 7:28 ` dillon.minfei at gmail.com
2021-04-09 9:47 ` Patrice CHOTARD
2021-04-09 7:28 ` [PATCH v5 7/7] board: Add rt-thread art-pi board support dillon.minfei at gmail.com
6 siblings, 1 reply; 15+ messages in thread
From: dillon.minfei at gmail.com @ 2021-04-09 7:28 UTC (permalink / raw)
To: u-boot
From: dillon min <dillon.minfei@gmail.com>
strsep will change data from original memory address,
in case the memory is in non-sdram/sram place, will
run into a bug(hang at SDRAM: )
just add a temporary array to store bank_name[] to fix this
bug.
Signed-off-by: dillon min <dillon.minfei@gmail.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
---
v5: no changes
drivers/ram/stm32_sdram.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/ram/stm32_sdram.c b/drivers/ram/stm32_sdram.c
index 540ad85..3e25cc7 100644
--- a/drivers/ram/stm32_sdram.c
+++ b/drivers/ram/stm32_sdram.c
@@ -268,6 +268,7 @@ static int stm32_fmc_of_to_plat(struct udevice *dev)
u32 swp_fmc;
ofnode bank_node;
char *bank_name;
+ char _bank_name[128] = {0};
u8 bank = 0;
int ret;
@@ -300,6 +301,8 @@ static int stm32_fmc_of_to_plat(struct udevice *dev)
dev_for_each_subnode(bank_node, dev) {
/* extract the bank index from DT */
bank_name = (char *)ofnode_get_name(bank_node);
+ strlcpy(_bank_name, bank_name, sizeof(_bank_name));
+ bank_name = (char *)_bank_name;
strsep(&bank_name, "@");
if (!bank_name) {
pr_err("missing sdram bank index");
--
2.7.4
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v5 7/7] board: Add rt-thread art-pi board support
2021-04-09 7:28 [PATCH v5 0/7] Add rt-thread art-pi board support dillon.minfei at gmail.com
` (5 preceding siblings ...)
2021-04-09 7:28 ` [PATCH v5 6/7] ram: stm32: fix strsep failed on read only memory dillon.minfei at gmail.com
@ 2021-04-09 7:28 ` dillon.minfei at gmail.com
2021-04-09 9:47 ` Patrice CHOTARD
6 siblings, 1 reply; 15+ messages in thread
From: dillon.minfei at gmail.com @ 2021-04-09 7:28 UTC (permalink / raw)
To: u-boot
From: dillon min <dillon.minfei@gmail.com>
All these files are add for support rt-thread art-pi board
- add board/st/stm32h750-art-pi, defconfig, header support for u-boot
for more information about art-pi, please goto:
https://art-pi.gitee.io/website/
Signed-off-by: dillon min <dillon.minfei@gmail.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
---
v5: remove "for STMicroelectronics." from Author(s) description
arch/arm/mach-stm32/stm32h7/Kconfig | 4 ++
board/st/stm32h750-art-pi/Kconfig | 19 +++++++++
board/st/stm32h750-art-pi/MAINTAINERS | 7 ++++
board/st/stm32h750-art-pi/Makefile | 6 +++
board/st/stm32h750-art-pi/stm32h750-art-pi.c | 58 ++++++++++++++++++++++++++++
configs/stm32h750-art-pi_defconfig | 51 ++++++++++++++++++++++++
include/configs/stm32h750-art-pi.h | 48 +++++++++++++++++++++++
7 files changed, 193 insertions(+)
create mode 100644 board/st/stm32h750-art-pi/Kconfig
create mode 100644 board/st/stm32h750-art-pi/MAINTAINERS
create mode 100644 board/st/stm32h750-art-pi/Makefile
create mode 100644 board/st/stm32h750-art-pi/stm32h750-art-pi.c
create mode 100644 configs/stm32h750-art-pi_defconfig
create mode 100644 include/configs/stm32h750-art-pi.h
diff --git a/arch/arm/mach-stm32/stm32h7/Kconfig b/arch/arm/mach-stm32/stm32h7/Kconfig
index 55e6217..70233a4 100644
--- a/arch/arm/mach-stm32/stm32h7/Kconfig
+++ b/arch/arm/mach-stm32/stm32h7/Kconfig
@@ -6,7 +6,11 @@ config TARGET_STM32H743_DISCO
config TARGET_STM32H743_EVAL
bool "STM32H743 Evaluation board"
+config TARGET_STM32H750_ART_PI
+ bool "STM32H750 ART Pi board"
+
source "board/st/stm32h743-eval/Kconfig"
source "board/st/stm32h743-disco/Kconfig"
+source "board/st/stm32h750-art-pi/Kconfig"
endif
diff --git a/board/st/stm32h750-art-pi/Kconfig b/board/st/stm32h750-art-pi/Kconfig
new file mode 100644
index 0000000..c31b984
--- /dev/null
+++ b/board/st/stm32h750-art-pi/Kconfig
@@ -0,0 +1,19 @@
+if TARGET_STM32H750_ART_PI
+
+config SYS_BOARD
+ string
+ default "stm32h750-art-pi"
+
+config SYS_VENDOR
+ string
+ default "st"
+
+config SYS_SOC
+ string
+ default "stm32h7"
+
+config SYS_CONFIG_NAME
+ string
+ default "stm32h750-art-pi"
+
+endif
diff --git a/board/st/stm32h750-art-pi/MAINTAINERS b/board/st/stm32h750-art-pi/MAINTAINERS
new file mode 100644
index 0000000..9578833
--- /dev/null
+++ b/board/st/stm32h750-art-pi/MAINTAINERS
@@ -0,0 +1,7 @@
+STM32H750 ART PI BOARD
+M: Dillon Min <dillon.minfei@gmail.com>
+S: Maintained
+F: board/st/stm32h750-art-pi
+F: include/configs/stm32h750-art-pi.h
+F: configs/stm32h750-art-pi_defconfig
+F: arch/arm/dts/stm32h7*
diff --git a/board/st/stm32h750-art-pi/Makefile b/board/st/stm32h750-art-pi/Makefile
new file mode 100644
index 0000000..a06de87
--- /dev/null
+++ b/board/st/stm32h750-art-pi/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2021, RT-Thread - All Rights Reserved
+# Author(s): Dillon Min, <dillon.minfei@gmail.com> for RT-Thread.
+
+obj-y := stm32h750-art-pi.o
diff --git a/board/st/stm32h750-art-pi/stm32h750-art-pi.c b/board/st/stm32h750-art-pi/stm32h750-art-pi.c
new file mode 100644
index 0000000..5785b2e
--- /dev/null
+++ b/board/st/stm32h750-art-pi/stm32h750-art-pi.c
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2021, STMicroelectronics - All Rights Reserved
+ * Author(s): Dillon Min <dillon.minfei@gmail.com>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <init.h>
+#include <log.h>
+#include <asm/global_data.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int dram_init(void)
+{
+ struct udevice *dev;
+ int ret;
+
+ ret = uclass_get_device(UCLASS_RAM, 0, &dev);
+ if (ret) {
+ debug("DRAM init failed: %d\n", ret);
+ return ret;
+ }
+
+ if (fdtdec_setup_mem_size_base() != 0)
+ ret = -EINVAL;
+
+ return ret;
+}
+
+int dram_init_banksize(void)
+{
+ fdtdec_setup_memory_banksize();
+
+ return 0;
+}
+
+int board_early_init_f(void)
+{
+ return 0;
+}
+
+u32 get_board_rev(void)
+{
+ return 0;
+}
+
+int board_late_init(void)
+{
+ return 0;
+}
+
+int board_init(void)
+{
+ gd->bd->bi_boot_params = gd->bd->bi_dram[0].start + 0x100;
+ return 0;
+}
diff --git a/configs/stm32h750-art-pi_defconfig b/configs/stm32h750-art-pi_defconfig
new file mode 100644
index 0000000..447af5b
--- /dev/null
+++ b/configs/stm32h750-art-pi_defconfig
@@ -0,0 +1,51 @@
+CONFIG_ARM=y
+CONFIG_ARCH_STM32=y
+CONFIG_SYS_TEXT_BASE=0x90000000
+CONFIG_SYS_MALLOC_F_LEN=0xF00
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_ENV_SIZE=0x2000
+CONFIG_STM32H7=y
+CONFIG_TARGET_STM32H750_ART_PI=y
+CONFIG_DEFAULT_DEVICE_TREE="stm32h750i-art-pi"
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_BOOTDELAY=3
+CONFIG_AUTOBOOT_KEYED=y
+CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n"
+CONFIG_AUTOBOOT_STOP_STR=" "
+# CONFIG_USE_BOOTCOMMAND is not set
+CONFIG_DEFAULT_FDT_FILE="stm32h750i-art-pi"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_BOARD_LATE_INIT=y
+CONFIG_SYS_PROMPT="U-Boot > "
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIMER=y
+CONFIG_CMD_EXT4_WRITE=y
+# CONFIG_ISO_PARTITION is not set
+CONFIG_OF_CONTROL=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+# CONFIG_NET is not set
+CONFIG_DM_MMC=y
+CONFIG_STM32_SDMMC2=y
+# CONFIG_PINCTRL_FULL is not set
+CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_BAUDRATE=2000000
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttySTM0,2000000 root=/dev/ram loglevel=8"
+CONFIG_BOOTCOMMAND="bootm 90080000"
+CONFIG_REQUIRE_SERIAL_CONSOLE=y
+CONFIG_SERIAL_PRESENT=y
+CONFIG_DM_SERIAL=y
+CONFIG_STM32_SERIAL=y
+CONFIG_FIT=y
+CONFIG_FIT_EXTERNAL_OFFSET=0x0
+CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
+CONFIG_FIT_FULL_CHECK=y
+CONFIG_FIT_PRINT=y
+CONFIG_LEGACY_IMAGE_FORMAT=y
+CONFIG_SUPPORT_RAW_INITRD=y
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_DM_DMA=y
diff --git a/include/configs/stm32h750-art-pi.h b/include/configs/stm32h750-art-pi.h
new file mode 100644
index 0000000..3fd5461
--- /dev/null
+++ b/include/configs/stm32h750-art-pi.h
@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2021, STMicroelectronics - All Rights Reserved
+ * Author(s): Dillon Min <dillon.minfei@gmail.com>
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <config.h>
+#include <linux/sizes.h>
+
+/* For booting Linux, use the first 16MB of memory */
+#define CONFIG_SYS_BOOTMAPSZ (SZ_16M + SZ_8M)
+
+#define CONFIG_SYS_FLASH_BASE 0x90000000
+#define CONFIG_SYS_INIT_SP_ADDR 0x24040000
+
+/*
+ * Configuration of the external SDRAM memory
+ */
+#define CONFIG_SYS_LOAD_ADDR 0xC1800000
+#define CONFIG_LOADADDR 0xC1800000
+
+#define CONFIG_SYS_HZ_CLOCK 1000000
+
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
+
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_MALLOC_LEN (1 * 1024 * 1024)
+
+#define BOOT_TARGET_DEVICES(func) \
+ func(MMC, mmc, 0)
+
+#include <config_distro_bootcmd.h>
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "kernel_addr_r=0xC0008000\0" \
+ "fdtfile=stm32h750i-art-pi.dtb\0" \
+ "fdt_addr_r=0xC0408000\0" \
+ "scriptaddr=0xC0418000\0" \
+ "pxefile_addr_r=0xC0428000\0" \
+ "ramdisk_addr_r=0xC0438000\0" \
+ BOOTENV
+
+#endif /* __CONFIG_H */
--
2.7.4
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v5 1/7] ARM: dts: stm32: split sdram pin & timing parameter into specific board dts
2021-04-09 7:28 ` [PATCH v5 1/7] ARM: dts: stm32: split sdram pin & timing parameter into specific board dts dillon.minfei at gmail.com
@ 2021-04-09 9:46 ` Patrice CHOTARD
0 siblings, 0 replies; 15+ messages in thread
From: Patrice CHOTARD @ 2021-04-09 9:46 UTC (permalink / raw)
To: u-boot
Hi Dillon
On 4/9/21 9:28 AM, dillon.minfei at gmail.com wrote:
> From: dillon min <dillon.minfei@gmail.com>
>
> As different boards has their own sdram hw connection, mount different
> sdram modules, so move sdram timing parameter and pin configuration
> to their board device tree.
>
> Signed-off-by: dillon min <dillon.minfei@gmail.com>
> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
> ---
> v5: no changes
>
> arch/arm/dts/stm32h7-u-boot.dtsi | 100 ++----------------------------
> arch/arm/dts/stm32h743i-disco-u-boot.dtsi | 98 +++++++++++++++++++++++++++++
> arch/arm/dts/stm32h743i-eval-u-boot.dtsi | 98 +++++++++++++++++++++++++++++
> 3 files changed, 201 insertions(+), 95 deletions(-)
>
> diff --git a/arch/arm/dts/stm32h7-u-boot.dtsi b/arch/arm/dts/stm32h7-u-boot.dtsi
> index 54dd406..84dc765 100644
> --- a/arch/arm/dts/stm32h7-u-boot.dtsi
> +++ b/arch/arm/dts/stm32h7-u-boot.dtsi
> @@ -20,6 +20,7 @@
> gpio9 = &gpioj;
> gpio10 = &gpiok;
> mmc0 = &sdmmc1;
> + pinctrl0 = &pinctrl;
> };
>
> soc {
> @@ -36,30 +37,6 @@
> pinctrl-0 = <&fmc_pins>;
> pinctrl-names = "default";
> status = "okay";
> -
> - /*
> - * Memory configuration from sdram datasheet IS42S32800G-6BLI
> - * first bank is bank at 0
> - * second bank is bank at 1
> - */
> - bank1: bank at 1 {
> - st,sdram-control = /bits/ 8 <NO_COL_9
> - NO_ROW_12
> - MWIDTH_32
> - BANKS_4
> - CAS_2
> - SDCLK_3
> - RD_BURST_EN
> - RD_PIPE_DL_0>;
> - st,sdram-timing = /bits/ 8 <TMRD_1
> - TXSR_1
> - TRAS_1
> - TRC_6
> - TRP_2
> - TWR_1
> - TRCD_1>;
> - st,sdram-refcount = <1539>;
> - };
> };
> };
> };
> @@ -136,77 +113,6 @@
> compatible = "st,stm32-gpio";
> };
>
> -&pinctrl {
> - fmc_pins: fmc at 0 {
> - pins {
> - pinmux = <STM32_PINMUX('D', 0, AF12)>,
> - <STM32_PINMUX('D', 1, AF12)>,
> - <STM32_PINMUX('D', 8, AF12)>,
> - <STM32_PINMUX('D', 9, AF12)>,
> - <STM32_PINMUX('D',10, AF12)>,
> - <STM32_PINMUX('D',14, AF12)>,
> - <STM32_PINMUX('D',15, AF12)>,
> -
> - <STM32_PINMUX('E', 0, AF12)>,
> - <STM32_PINMUX('E', 1, AF12)>,
> - <STM32_PINMUX('E', 7, AF12)>,
> - <STM32_PINMUX('E', 8, AF12)>,
> - <STM32_PINMUX('E', 9, AF12)>,
> - <STM32_PINMUX('E',10, AF12)>,
> - <STM32_PINMUX('E',11, AF12)>,
> - <STM32_PINMUX('E',12, AF12)>,
> - <STM32_PINMUX('E',13, AF12)>,
> - <STM32_PINMUX('E',14, AF12)>,
> - <STM32_PINMUX('E',15, AF12)>,
> -
> - <STM32_PINMUX('F', 0, AF12)>,
> - <STM32_PINMUX('F', 1, AF12)>,
> - <STM32_PINMUX('F', 2, AF12)>,
> - <STM32_PINMUX('F', 3, AF12)>,
> - <STM32_PINMUX('F', 4, AF12)>,
> - <STM32_PINMUX('F', 5, AF12)>,
> - <STM32_PINMUX('F',11, AF12)>,
> - <STM32_PINMUX('F',12, AF12)>,
> - <STM32_PINMUX('F',13, AF12)>,
> - <STM32_PINMUX('F',14, AF12)>,
> - <STM32_PINMUX('F',15, AF12)>,
> -
> - <STM32_PINMUX('G', 0, AF12)>,
> - <STM32_PINMUX('G', 1, AF12)>,
> - <STM32_PINMUX('G', 2, AF12)>,
> - <STM32_PINMUX('G', 4, AF12)>,
> - <STM32_PINMUX('G', 5, AF12)>,
> - <STM32_PINMUX('G', 8, AF12)>,
> - <STM32_PINMUX('G',15, AF12)>,
> -
> - <STM32_PINMUX('H', 5, AF12)>,
> - <STM32_PINMUX('H', 6, AF12)>,
> - <STM32_PINMUX('H', 7, AF12)>,
> - <STM32_PINMUX('H', 8, AF12)>,
> - <STM32_PINMUX('H', 9, AF12)>,
> - <STM32_PINMUX('H',10, AF12)>,
> - <STM32_PINMUX('H',11, AF12)>,
> - <STM32_PINMUX('H',12, AF12)>,
> - <STM32_PINMUX('H',13, AF12)>,
> - <STM32_PINMUX('H',14, AF12)>,
> - <STM32_PINMUX('H',15, AF12)>,
> -
> - <STM32_PINMUX('I', 0, AF12)>,
> - <STM32_PINMUX('I', 1, AF12)>,
> - <STM32_PINMUX('I', 2, AF12)>,
> - <STM32_PINMUX('I', 3, AF12)>,
> - <STM32_PINMUX('I', 4, AF12)>,
> - <STM32_PINMUX('I', 5, AF12)>,
> - <STM32_PINMUX('I', 6, AF12)>,
> - <STM32_PINMUX('I', 7, AF12)>,
> - <STM32_PINMUX('I', 9, AF12)>,
> - <STM32_PINMUX('I',10, AF12)>;
> -
> - slew-rate = <3>;
> - };
> - };
> -};
> -
> &pwrcfg {
> u-boot,dm-pre-reloc;
> };
> @@ -222,3 +128,7 @@
> &timer5 {
> u-boot,dm-pre-reloc;
> };
> +
> +&pinctrl {
> + u-boot,dm-pre-reloc;
> +};
> diff --git a/arch/arm/dts/stm32h743i-disco-u-boot.dtsi b/arch/arm/dts/stm32h743i-disco-u-boot.dtsi
> index 5965afc..02e28c6 100644
> --- a/arch/arm/dts/stm32h743i-disco-u-boot.dtsi
> +++ b/arch/arm/dts/stm32h743i-disco-u-boot.dtsi
> @@ -1,3 +1,101 @@
> // SPDX-License-Identifier: GPL-2.0+
>
> #include <stm32h7-u-boot.dtsi>
> +
> +&fmc {
> +
> + /*
> + * Memory configuration from sdram datasheet IS42S32800G-6BLI
> + * first bank is bank at 0
> + * second bank is bank at 1
> + */
> + bank1: bank at 1 {
> + st,sdram-control = /bits/ 8 <NO_COL_9
> + NO_ROW_12
> + MWIDTH_32
> + BANKS_4
> + CAS_2
> + SDCLK_3
> + RD_BURST_EN
> + RD_PIPE_DL_0>;
> + st,sdram-timing = /bits/ 8 <TMRD_1
> + TXSR_1
> + TRAS_1
> + TRC_6
> + TRP_2
> + TWR_1
> + TRCD_1>;
> + st,sdram-refcount = <1539>;
> + };
> +};
> +
> +&pinctrl {
> + fmc_pins: fmc at 0 {
> + pins {
> + pinmux = <STM32_PINMUX('D', 0, AF12)>,
> + <STM32_PINMUX('D', 1, AF12)>,
> + <STM32_PINMUX('D', 8, AF12)>,
> + <STM32_PINMUX('D', 9, AF12)>,
> + <STM32_PINMUX('D',10, AF12)>,
> + <STM32_PINMUX('D',14, AF12)>,
> + <STM32_PINMUX('D',15, AF12)>,
> +
> + <STM32_PINMUX('E', 0, AF12)>,
> + <STM32_PINMUX('E', 1, AF12)>,
> + <STM32_PINMUX('E', 7, AF12)>,
> + <STM32_PINMUX('E', 8, AF12)>,
> + <STM32_PINMUX('E', 9, AF12)>,
> + <STM32_PINMUX('E',10, AF12)>,
> + <STM32_PINMUX('E',11, AF12)>,
> + <STM32_PINMUX('E',12, AF12)>,
> + <STM32_PINMUX('E',13, AF12)>,
> + <STM32_PINMUX('E',14, AF12)>,
> + <STM32_PINMUX('E',15, AF12)>,
> +
> + <STM32_PINMUX('F', 0, AF12)>,
> + <STM32_PINMUX('F', 1, AF12)>,
> + <STM32_PINMUX('F', 2, AF12)>,
> + <STM32_PINMUX('F', 3, AF12)>,
> + <STM32_PINMUX('F', 4, AF12)>,
> + <STM32_PINMUX('F', 5, AF12)>,
> + <STM32_PINMUX('F',11, AF12)>,
> + <STM32_PINMUX('F',12, AF12)>,
> + <STM32_PINMUX('F',13, AF12)>,
> + <STM32_PINMUX('F',14, AF12)>,
> + <STM32_PINMUX('F',15, AF12)>,
> +
> + <STM32_PINMUX('G', 0, AF12)>,
> + <STM32_PINMUX('G', 1, AF12)>,
> + <STM32_PINMUX('G', 2, AF12)>,
> + <STM32_PINMUX('G', 4, AF12)>,
> + <STM32_PINMUX('G', 5, AF12)>,
> + <STM32_PINMUX('G', 8, AF12)>,
> + <STM32_PINMUX('G',15, AF12)>,
> +
> + <STM32_PINMUX('H', 5, AF12)>,
> + <STM32_PINMUX('H', 6, AF12)>,
> + <STM32_PINMUX('H', 7, AF12)>,
> + <STM32_PINMUX('H', 8, AF12)>,
> + <STM32_PINMUX('H', 9, AF12)>,
> + <STM32_PINMUX('H',10, AF12)>,
> + <STM32_PINMUX('H',11, AF12)>,
> + <STM32_PINMUX('H',12, AF12)>,
> + <STM32_PINMUX('H',13, AF12)>,
> + <STM32_PINMUX('H',14, AF12)>,
> + <STM32_PINMUX('H',15, AF12)>,
> +
> + <STM32_PINMUX('I', 0, AF12)>,
> + <STM32_PINMUX('I', 1, AF12)>,
> + <STM32_PINMUX('I', 2, AF12)>,
> + <STM32_PINMUX('I', 3, AF12)>,
> + <STM32_PINMUX('I', 4, AF12)>,
> + <STM32_PINMUX('I', 5, AF12)>,
> + <STM32_PINMUX('I', 6, AF12)>,
> + <STM32_PINMUX('I', 7, AF12)>,
> + <STM32_PINMUX('I', 9, AF12)>,
> + <STM32_PINMUX('I',10, AF12)>;
> +
> + slew-rate = <3>;
> + };
> + };
> +};
> diff --git a/arch/arm/dts/stm32h743i-eval-u-boot.dtsi b/arch/arm/dts/stm32h743i-eval-u-boot.dtsi
> index 5965afc..02e28c6 100644
> --- a/arch/arm/dts/stm32h743i-eval-u-boot.dtsi
> +++ b/arch/arm/dts/stm32h743i-eval-u-boot.dtsi
> @@ -1,3 +1,101 @@
> // SPDX-License-Identifier: GPL-2.0+
>
> #include <stm32h7-u-boot.dtsi>
> +
> +&fmc {
> +
> + /*
> + * Memory configuration from sdram datasheet IS42S32800G-6BLI
> + * first bank is bank at 0
> + * second bank is bank at 1
> + */
> + bank1: bank at 1 {
> + st,sdram-control = /bits/ 8 <NO_COL_9
> + NO_ROW_12
> + MWIDTH_32
> + BANKS_4
> + CAS_2
> + SDCLK_3
> + RD_BURST_EN
> + RD_PIPE_DL_0>;
> + st,sdram-timing = /bits/ 8 <TMRD_1
> + TXSR_1
> + TRAS_1
> + TRC_6
> + TRP_2
> + TWR_1
> + TRCD_1>;
> + st,sdram-refcount = <1539>;
> + };
> +};
> +
> +&pinctrl {
> + fmc_pins: fmc at 0 {
> + pins {
> + pinmux = <STM32_PINMUX('D', 0, AF12)>,
> + <STM32_PINMUX('D', 1, AF12)>,
> + <STM32_PINMUX('D', 8, AF12)>,
> + <STM32_PINMUX('D', 9, AF12)>,
> + <STM32_PINMUX('D',10, AF12)>,
> + <STM32_PINMUX('D',14, AF12)>,
> + <STM32_PINMUX('D',15, AF12)>,
> +
> + <STM32_PINMUX('E', 0, AF12)>,
> + <STM32_PINMUX('E', 1, AF12)>,
> + <STM32_PINMUX('E', 7, AF12)>,
> + <STM32_PINMUX('E', 8, AF12)>,
> + <STM32_PINMUX('E', 9, AF12)>,
> + <STM32_PINMUX('E',10, AF12)>,
> + <STM32_PINMUX('E',11, AF12)>,
> + <STM32_PINMUX('E',12, AF12)>,
> + <STM32_PINMUX('E',13, AF12)>,
> + <STM32_PINMUX('E',14, AF12)>,
> + <STM32_PINMUX('E',15, AF12)>,
> +
> + <STM32_PINMUX('F', 0, AF12)>,
> + <STM32_PINMUX('F', 1, AF12)>,
> + <STM32_PINMUX('F', 2, AF12)>,
> + <STM32_PINMUX('F', 3, AF12)>,
> + <STM32_PINMUX('F', 4, AF12)>,
> + <STM32_PINMUX('F', 5, AF12)>,
> + <STM32_PINMUX('F',11, AF12)>,
> + <STM32_PINMUX('F',12, AF12)>,
> + <STM32_PINMUX('F',13, AF12)>,
> + <STM32_PINMUX('F',14, AF12)>,
> + <STM32_PINMUX('F',15, AF12)>,
> +
> + <STM32_PINMUX('G', 0, AF12)>,
> + <STM32_PINMUX('G', 1, AF12)>,
> + <STM32_PINMUX('G', 2, AF12)>,
> + <STM32_PINMUX('G', 4, AF12)>,
> + <STM32_PINMUX('G', 5, AF12)>,
> + <STM32_PINMUX('G', 8, AF12)>,
> + <STM32_PINMUX('G',15, AF12)>,
> +
> + <STM32_PINMUX('H', 5, AF12)>,
> + <STM32_PINMUX('H', 6, AF12)>,
> + <STM32_PINMUX('H', 7, AF12)>,
> + <STM32_PINMUX('H', 8, AF12)>,
> + <STM32_PINMUX('H', 9, AF12)>,
> + <STM32_PINMUX('H',10, AF12)>,
> + <STM32_PINMUX('H',11, AF12)>,
> + <STM32_PINMUX('H',12, AF12)>,
> + <STM32_PINMUX('H',13, AF12)>,
> + <STM32_PINMUX('H',14, AF12)>,
> + <STM32_PINMUX('H',15, AF12)>,
> +
> + <STM32_PINMUX('I', 0, AF12)>,
> + <STM32_PINMUX('I', 1, AF12)>,
> + <STM32_PINMUX('I', 2, AF12)>,
> + <STM32_PINMUX('I', 3, AF12)>,
> + <STM32_PINMUX('I', 4, AF12)>,
> + <STM32_PINMUX('I', 5, AF12)>,
> + <STM32_PINMUX('I', 6, AF12)>,
> + <STM32_PINMUX('I', 7, AF12)>,
> + <STM32_PINMUX('I', 9, AF12)>,
> + <STM32_PINMUX('I',10, AF12)>;
> +
> + slew-rate = <3>;
> + };
> + };
> +};
>
Applied to u-boot-stm/master
Thanks
Patrice
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH v5 2/7] ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h750
2021-04-09 7:28 ` [PATCH v5 2/7] ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h750 dillon.minfei at gmail.com
@ 2021-04-09 9:47 ` Patrice CHOTARD
0 siblings, 0 replies; 15+ messages in thread
From: Patrice CHOTARD @ 2021-04-09 9:47 UTC (permalink / raw)
To: u-boot
Hi Dillon
On 4/9/21 9:28 AM, dillon.minfei at gmail.com wrote:
> From: dillon min <dillon.minfei@gmail.com>
>
> This patch is intend to add support stm32h750 value line,
> just add stm32h7-pinctrl.dtsi for extending, with following changes:
>
> - rename stm32h743-pinctrl.dtsi to stm32h7-pinctrl.dtsi
> - move 'pin-controller' from stm32h7-pinctrl.dtsi to stm32h743.dtsi
> - update stm32h743i-{disco, eval}.dts to include stm32h7-pinctrl.dtsi
>
> Signed-off-by: dillon min <dillon.minfei@gmail.com>
> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
> ---
> v5: no changes
>
> arch/arm/dts/stm32h7-pinctrl.dtsi | 185 ++++++++++++++++++++++
> arch/arm/dts/stm32h743-pinctrl.dtsi | 306 ------------------------------------
> arch/arm/dts/stm32h743.dtsi | 142 +++++++++++++++++
> arch/arm/dts/stm32h743i-disco.dts | 2 +-
> arch/arm/dts/stm32h743i-eval.dts | 2 +-
> 5 files changed, 329 insertions(+), 308 deletions(-)
> create mode 100644 arch/arm/dts/stm32h7-pinctrl.dtsi
> delete mode 100644 arch/arm/dts/stm32h743-pinctrl.dtsi
>
> diff --git a/arch/arm/dts/stm32h7-pinctrl.dtsi b/arch/arm/dts/stm32h7-pinctrl.dtsi
> new file mode 100644
> index 0000000..f6968b5
> --- /dev/null
> +++ b/arch/arm/dts/stm32h7-pinctrl.dtsi
> @@ -0,0 +1,185 @@
> +/*
> + * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +#include <dt-bindings/pinctrl/stm32-pinfunc.h>
> +
> +&pinctrl {
> +
> + i2c1_pins_a: i2c1-0 {
> + pins {
> + pinmux = <STM32_PINMUX('B', 6, AF4)>, /* I2C1_SCL */
> + <STM32_PINMUX('B', 7, AF4)>; /* I2C1_SDA */
> + bias-disable;
> + drive-open-drain;
> + slew-rate = <0>;
> + };
> + };
> +
> + ethernet_rmii: rmii-0 {
> + pins {
> + pinmux = <STM32_PINMUX('G', 11, AF11)>,
> + <STM32_PINMUX('G', 13, AF11)>,
> + <STM32_PINMUX('G', 12, AF11)>,
> + <STM32_PINMUX('C', 4, AF11)>,
> + <STM32_PINMUX('C', 5, AF11)>,
> + <STM32_PINMUX('A', 7, AF11)>,
> + <STM32_PINMUX('C', 1, AF11)>,
> + <STM32_PINMUX('A', 2, AF11)>,
> + <STM32_PINMUX('A', 1, AF11)>;
> + slew-rate = <2>;
> + };
> + };
> +
> + sdmmc1_b4_pins_a: sdmmc1-b4-0 {
> + pins {
> + pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
> + <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
> + <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
> + <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
> + <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1_CK */
> + <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
> + slew-rate = <3>;
> + drive-push-pull;
> + bias-disable;
> + };
> + };
> +
> + sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 {
> + pins1 {
> + pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
> + <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
> + <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
> + <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
> + <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
> + slew-rate = <3>;
> + drive-push-pull;
> + bias-disable;
> + };
> + pins2{
> + pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
> + slew-rate = <3>;
> + drive-open-drain;
> + bias-disable;
> + };
> + };
> +
> + sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 {
> + pins {
> + pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */
> + <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */
> + <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */
> + <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */
> + <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */
> + <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */
> + };
> + };
> +
> + sdmmc1_dir_pins_a: sdmmc1-dir-0 {
> + pins1 {
> + pinmux = <STM32_PINMUX('C', 6, AF8)>, /* SDMMC1_D0DIR */
> + <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
> + <STM32_PINMUX('B', 9, AF7)>; /* SDMMC1_CDIR */
> + slew-rate = <3>;
> + drive-push-pull;
> + bias-pull-up;
> + };
> + pins2{
> + pinmux = <STM32_PINMUX('B', 8, AF7)>; /* SDMMC1_CKIN */
> + bias-pull-up;
> + };
> + };
> +
> + sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 {
> + pins {
> + pinmux = <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC1_D0DIR */
> + <STM32_PINMUX('C', 7, ANALOG)>, /* SDMMC1_D123DIR */
> + <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */
> + <STM32_PINMUX('B', 8, ANALOG)>; /* SDMMC1_CKIN */
> + };
> + };
> +
> + usart1_pins: usart1-0 {
> + pins1 {
> + pinmux = <STM32_PINMUX('B', 14, AF4)>; /* USART1_TX */
> + bias-disable;
> + drive-push-pull;
> + slew-rate = <0>;
> + };
> + pins2 {
> + pinmux = <STM32_PINMUX('B', 15, AF4)>; /* USART1_RX */
> + bias-disable;
> + };
> + };
> +
> + usart2_pins: usart2-0 {
> + pins1 {
> + pinmux = <STM32_PINMUX('D', 5, AF7)>; /* USART2_TX */
> + bias-disable;
> + drive-push-pull;
> + slew-rate = <0>;
> + };
> + pins2 {
> + pinmux = <STM32_PINMUX('D', 6, AF7)>; /* USART2_RX */
> + bias-disable;
> + };
> + };
> +
> + usbotg_hs_pins_a: usbotg-hs-0 {
> + pins {
> + pinmux = <STM32_PINMUX('H', 4, AF10)>, /* ULPI_NXT */
> + <STM32_PINMUX('I', 11, AF10)>, /* ULPI_DIR> */
> + <STM32_PINMUX('C', 0, AF10)>, /* ULPI_STP> */
> + <STM32_PINMUX('A', 5, AF10)>, /* ULPI_CK> */
> + <STM32_PINMUX('A', 3, AF10)>, /* ULPI_D0> */
> + <STM32_PINMUX('B', 0, AF10)>, /* ULPI_D1> */
> + <STM32_PINMUX('B', 1, AF10)>, /* ULPI_D2> */
> + <STM32_PINMUX('B', 10, AF10)>, /* ULPI_D3> */
> + <STM32_PINMUX('B', 11, AF10)>, /* ULPI_D4> */
> + <STM32_PINMUX('B', 12, AF10)>, /* ULPI_D5> */
> + <STM32_PINMUX('B', 13, AF10)>, /* ULPI_D6> */
> + <STM32_PINMUX('B', 5, AF10)>; /* ULPI_D7> */
> + bias-disable;
> + drive-push-pull;
> + slew-rate = <2>;
> + };
> + };
> +};
> diff --git a/arch/arm/dts/stm32h743-pinctrl.dtsi b/arch/arm/dts/stm32h743-pinctrl.dtsi
> deleted file mode 100644
> index 141083f..0000000
> --- a/arch/arm/dts/stm32h743-pinctrl.dtsi
> +++ /dev/null
> @@ -1,306 +0,0 @@
> -/*
> - * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
> - *
> - * This file is dual-licensed: you can use it either under the terms
> - * of the GPL or the X11 license, at your option. Note that this dual
> - * licensing only applies to this file, and not this project as a
> - * whole.
> - *
> - * a) This file is free software; you can redistribute it and/or
> - * modify it under the terms of the GNU General Public License as
> - * published by the Free Software Foundation; either version 2 of the
> - * License, or (at your option) any later version.
> - *
> - * This file is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - * GNU General Public License for more details.
> - *
> - * Or, alternatively,
> - *
> - * b) Permission is hereby granted, free of charge, to any person
> - * obtaining a copy of this software and associated documentation
> - * files (the "Software"), to deal in the Software without
> - * restriction, including without limitation the rights to use,
> - * copy, modify, merge, publish, distribute, sublicense, and/or
> - * sell copies of the Software, and to permit persons to whom the
> - * Software is furnished to do so, subject to the following
> - * conditions:
> - *
> - * The above copyright notice and this permission notice shall be
> - * included in all copies or substantial portions of the Software.
> - *
> - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> - * OTHER DEALINGS IN THE SOFTWARE.
> - */
> -
> -#include <dt-bindings/pinctrl/stm32-pinfunc.h>
> -
> -/ {
> - soc {
> - pinctrl: pin-controller {
> - #address-cells = <1>;
> - #size-cells = <1>;
> - compatible = "st,stm32h743-pinctrl";
> - ranges = <0 0x58020000 0x3000>;
> - interrupt-parent = <&exti>;
> - st,syscfg = <&syscfg 0x8>;
> - pins-are-numbered;
> -
> - gpioa: gpio at 58020000 {
> - gpio-controller;
> - #gpio-cells = <2>;
> - reg = <0x0 0x400>;
> - clocks = <&rcc GPIOA_CK>;
> - st,bank-name = "GPIOA";
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - };
> -
> - gpiob: gpio at 58020400 {
> - gpio-controller;
> - #gpio-cells = <2>;
> - reg = <0x400 0x400>;
> - clocks = <&rcc GPIOB_CK>;
> - st,bank-name = "GPIOB";
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - };
> -
> - gpioc: gpio at 58020800 {
> - gpio-controller;
> - #gpio-cells = <2>;
> - reg = <0x800 0x400>;
> - clocks = <&rcc GPIOC_CK>;
> - st,bank-name = "GPIOC";
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - };
> -
> - gpiod: gpio at 58020c00 {
> - gpio-controller;
> - #gpio-cells = <2>;
> - reg = <0xc00 0x400>;
> - clocks = <&rcc GPIOD_CK>;
> - st,bank-name = "GPIOD";
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - };
> -
> - gpioe: gpio at 58021000 {
> - gpio-controller;
> - #gpio-cells = <2>;
> - reg = <0x1000 0x400>;
> - clocks = <&rcc GPIOE_CK>;
> - st,bank-name = "GPIOE";
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - };
> -
> - gpiof: gpio at 58021400 {
> - gpio-controller;
> - #gpio-cells = <2>;
> - reg = <0x1400 0x400>;
> - clocks = <&rcc GPIOF_CK>;
> - st,bank-name = "GPIOF";
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - };
> -
> - gpiog: gpio at 58021800 {
> - gpio-controller;
> - #gpio-cells = <2>;
> - reg = <0x1800 0x400>;
> - clocks = <&rcc GPIOG_CK>;
> - st,bank-name = "GPIOG";
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - };
> -
> - gpioh: gpio at 58021c00 {
> - gpio-controller;
> - #gpio-cells = <2>;
> - reg = <0x1c00 0x400>;
> - clocks = <&rcc GPIOH_CK>;
> - st,bank-name = "GPIOH";
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - };
> -
> - gpioi: gpio at 58022000 {
> - gpio-controller;
> - #gpio-cells = <2>;
> - reg = <0x2000 0x400>;
> - clocks = <&rcc GPIOI_CK>;
> - st,bank-name = "GPIOI";
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - };
> -
> - gpioj: gpio at 58022400 {
> - gpio-controller;
> - #gpio-cells = <2>;
> - reg = <0x2400 0x400>;
> - clocks = <&rcc GPIOJ_CK>;
> - st,bank-name = "GPIOJ";
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - };
> -
> - gpiok: gpio at 58022800 {
> - gpio-controller;
> - #gpio-cells = <2>;
> - reg = <0x2800 0x400>;
> - clocks = <&rcc GPIOK_CK>;
> - st,bank-name = "GPIOK";
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - };
> -
> - i2c1_pins_a: i2c1-0 {
> - pins {
> - pinmux = <STM32_PINMUX('B', 6, AF4)>, /* I2C1_SCL */
> - <STM32_PINMUX('B', 7, AF4)>; /* I2C1_SDA */
> - bias-disable;
> - drive-open-drain;
> - slew-rate = <0>;
> - };
> - };
> -
> - ethernet_rmii: rmii-0 {
> - pins {
> - pinmux = <STM32_PINMUX('G', 11, AF11)>,
> - <STM32_PINMUX('G', 13, AF11)>,
> - <STM32_PINMUX('G', 12, AF11)>,
> - <STM32_PINMUX('C', 4, AF11)>,
> - <STM32_PINMUX('C', 5, AF11)>,
> - <STM32_PINMUX('A', 7, AF11)>,
> - <STM32_PINMUX('C', 1, AF11)>,
> - <STM32_PINMUX('A', 2, AF11)>,
> - <STM32_PINMUX('A', 1, AF11)>;
> - slew-rate = <2>;
> - };
> - };
> -
> - sdmmc1_b4_pins_a: sdmmc1-b4-0 {
> - pins {
> - pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
> - <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
> - <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
> - <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
> - <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1_CK */
> - <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
> - slew-rate = <3>;
> - drive-push-pull;
> - bias-disable;
> - };
> - };
> -
> - sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 {
> - pins1 {
> - pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
> - <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
> - <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
> - <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
> - <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
> - slew-rate = <3>;
> - drive-push-pull;
> - bias-disable;
> - };
> - pins2{
> - pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
> - slew-rate = <3>;
> - drive-open-drain;
> - bias-disable;
> - };
> - };
> -
> - sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 {
> - pins {
> - pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */
> - <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */
> - <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */
> - <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */
> - <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */
> - <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */
> - };
> - };
> -
> - sdmmc1_dir_pins_a: sdmmc1-dir-0 {
> - pins1 {
> - pinmux = <STM32_PINMUX('C', 6, AF8)>, /* SDMMC1_D0DIR */
> - <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
> - <STM32_PINMUX('B', 9, AF7)>; /* SDMMC1_CDIR */
> - slew-rate = <3>;
> - drive-push-pull;
> - bias-pull-up;
> - };
> - pins2{
> - pinmux = <STM32_PINMUX('B', 8, AF7)>; /* SDMMC1_CKIN */
> - bias-pull-up;
> - };
> - };
> -
> - sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 {
> - pins {
> - pinmux = <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC1_D0DIR */
> - <STM32_PINMUX('C', 7, ANALOG)>, /* SDMMC1_D123DIR */
> - <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */
> - <STM32_PINMUX('B', 8, ANALOG)>; /* SDMMC1_CKIN */
> - };
> - };
> -
> - usart1_pins: usart1-0 {
> - pins1 {
> - pinmux = <STM32_PINMUX('B', 14, AF4)>; /* USART1_TX */
> - bias-disable;
> - drive-push-pull;
> - slew-rate = <0>;
> - };
> - pins2 {
> - pinmux = <STM32_PINMUX('B', 15, AF4)>; /* USART1_RX */
> - bias-disable;
> - };
> - };
> -
> - usart2_pins: usart2-0 {
> - pins1 {
> - pinmux = <STM32_PINMUX('D', 5, AF7)>; /* USART2_TX */
> - bias-disable;
> - drive-push-pull;
> - slew-rate = <0>;
> - };
> - pins2 {
> - pinmux = <STM32_PINMUX('D', 6, AF7)>; /* USART2_RX */
> - bias-disable;
> - };
> - };
> -
> - usbotg_hs_pins_a: usbotg-hs-0 {
> - pins {
> - pinmux = <STM32_PINMUX('H', 4, AF10)>, /* ULPI_NXT */
> - <STM32_PINMUX('I', 11, AF10)>, /* ULPI_DIR> */
> - <STM32_PINMUX('C', 0, AF10)>, /* ULPI_STP> */
> - <STM32_PINMUX('A', 5, AF10)>, /* ULPI_CK> */
> - <STM32_PINMUX('A', 3, AF10)>, /* ULPI_D0> */
> - <STM32_PINMUX('B', 0, AF10)>, /* ULPI_D1> */
> - <STM32_PINMUX('B', 1, AF10)>, /* ULPI_D2> */
> - <STM32_PINMUX('B', 10, AF10)>, /* ULPI_D3> */
> - <STM32_PINMUX('B', 11, AF10)>, /* ULPI_D4> */
> - <STM32_PINMUX('B', 12, AF10)>, /* ULPI_D5> */
> - <STM32_PINMUX('B', 13, AF10)>, /* ULPI_D6> */
> - <STM32_PINMUX('B', 5, AF10)>; /* ULPI_D7> */
> - bias-disable;
> - drive-push-pull;
> - slew-rate = <2>;
> - };
> - };
> - };
> - };
> -};
> diff --git a/arch/arm/dts/stm32h743.dtsi b/arch/arm/dts/stm32h743.dtsi
> index e4e4723..8c96698 100644
> --- a/arch/arm/dts/stm32h743.dtsi
> +++ b/arch/arm/dts/stm32h743.dtsi
> @@ -519,6 +519,148 @@
> snps,pbl = <8>;
> status = "disabled";
> };
> +
> + pinctrl: pin-controller at 58020000 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "st,stm32h743-pinctrl";
> + ranges = <0 0x58020000 0x3000>;
> + interrupt-parent = <&exti>;
> + st,syscfg = <&syscfg 0x8>;
> + pins-are-numbered;
> +
> + gpioa: gpio at 58020000 {
> + gpio-controller;
> + #gpio-cells = <2>;
> + reg = <0x0 0x400>;
> + clocks = <&rcc GPIOA_CK>;
> + st,bank-name = "GPIOA";
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + ngpios = <16>;
> + gpio-ranges = <&pinctrl 0 0 16>;
> + };
> +
> + gpiob: gpio at 58020400 {
> + gpio-controller;
> + #gpio-cells = <2>;
> + reg = <0x400 0x400>;
> + clocks = <&rcc GPIOB_CK>;
> + st,bank-name = "GPIOB";
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + ngpios = <16>;
> + gpio-ranges = <&pinctrl 0 16 16>;
> + };
> +
> + gpioc: gpio at 58020800 {
> + gpio-controller;
> + #gpio-cells = <2>;
> + reg = <0x800 0x400>;
> + clocks = <&rcc GPIOC_CK>;
> + st,bank-name = "GPIOC";
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + ngpios = <16>;
> + gpio-ranges = <&pinctrl 0 32 16>;
> + };
> +
> + gpiod: gpio at 58020c00 {
> + gpio-controller;
> + #gpio-cells = <2>;
> + reg = <0xc00 0x400>;
> + clocks = <&rcc GPIOD_CK>;
> + st,bank-name = "GPIOD";
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + ngpios = <16>;
> + gpio-ranges = <&pinctrl 0 48 16>;
> + };
> +
> + gpioe: gpio at 58021000 {
> + gpio-controller;
> + #gpio-cells = <2>;
> + reg = <0x1000 0x400>;
> + clocks = <&rcc GPIOE_CK>;
> + st,bank-name = "GPIOE";
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + ngpios = <16>;
> + gpio-ranges = <&pinctrl 0 64 16>;
> + };
> +
> + gpiof: gpio at 58021400 {
> + gpio-controller;
> + #gpio-cells = <2>;
> + reg = <0x1400 0x400>;
> + clocks = <&rcc GPIOF_CK>;
> + st,bank-name = "GPIOF";
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + ngpios = <16>;
> + gpio-ranges = <&pinctrl 0 80 16>;
> + };
> +
> + gpiog: gpio at 58021800 {
> + gpio-controller;
> + #gpio-cells = <2>;
> + reg = <0x1800 0x400>;
> + clocks = <&rcc GPIOG_CK>;
> + st,bank-name = "GPIOG";
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + ngpios = <16>;
> + gpio-ranges = <&pinctrl 0 96 16>;
> + };
> +
> + gpioh: gpio at 58021c00 {
> + gpio-controller;
> + #gpio-cells = <2>;
> + reg = <0x1c00 0x400>;
> + clocks = <&rcc GPIOH_CK>;
> + st,bank-name = "GPIOH";
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + ngpios = <16>;
> + gpio-ranges = <&pinctrl 0 112 16>;
> + };
> +
> + gpioi: gpio at 58022000 {
> + gpio-controller;
> + #gpio-cells = <2>;
> + reg = <0x2000 0x400>;
> + clocks = <&rcc GPIOI_CK>;
> + st,bank-name = "GPIOI";
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + ngpios = <16>;
> + gpio-ranges = <&pinctrl 0 128 16>;
> + };
> +
> + gpioj: gpio at 58022400 {
> + gpio-controller;
> + #gpio-cells = <2>;
> + reg = <0x2400 0x400>;
> + clocks = <&rcc GPIOJ_CK>;
> + st,bank-name = "GPIOJ";
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + ngpios = <16>;
> + gpio-ranges = <&pinctrl 0 144 16>;
> + };
> +
> + gpiok: gpio at 58022800 {
> + gpio-controller;
> + #gpio-cells = <2>;
> + reg = <0x2800 0x400>;
> + clocks = <&rcc GPIOK_CK>;
> + st,bank-name = "GPIOK";
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + ngpios = <8>;
> + gpio-ranges = <&pinctrl 0 160 8>;
> + };
> + };
> };
> };
>
> diff --git a/arch/arm/dts/stm32h743i-disco.dts b/arch/arm/dts/stm32h743i-disco.dts
> index 7927310..3a01ebd 100644
> --- a/arch/arm/dts/stm32h743i-disco.dts
> +++ b/arch/arm/dts/stm32h743i-disco.dts
> @@ -6,7 +6,7 @@
>
> /dts-v1/;
> #include "stm32h743.dtsi"
> -#include "stm32h743-pinctrl.dtsi"
> +#include "stm32h7-pinctrl.dtsi"
>
> / {
> model = "STMicroelectronics STM32H743i-Discovery board";
> diff --git a/arch/arm/dts/stm32h743i-eval.dts b/arch/arm/dts/stm32h743i-eval.dts
> index 8f39817..38cc7fa 100644
> --- a/arch/arm/dts/stm32h743i-eval.dts
> +++ b/arch/arm/dts/stm32h743i-eval.dts
> @@ -42,7 +42,7 @@
>
> /dts-v1/;
> #include "stm32h743.dtsi"
> -#include "stm32h743-pinctrl.dtsi"
> +#include "stm32h7-pinctrl.dtsi"
>
> / {
> model = "STMicroelectronics STM32H743i-EVAL board";
>
Applied to u-boot-stm/master
Thanks
Patrice
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH v5 3/7] ARM: dts: stm32: add new instances for stm32h743 MCU
2021-04-09 7:28 ` [PATCH v5 3/7] ARM: dts: stm32: add new instances for stm32h743 MCU dillon.minfei at gmail.com
@ 2021-04-09 9:47 ` Patrice CHOTARD
0 siblings, 0 replies; 15+ messages in thread
From: Patrice CHOTARD @ 2021-04-09 9:47 UTC (permalink / raw)
To: u-boot
Hi Dillon
On 4/9/21 9:28 AM, dillon.minfei at gmail.com wrote:
> From: dillon min <dillon.minfei@gmail.com>
>
> Some instances are missing in current support of stm32h743 MCU. This commit
> adds usart3/uart4 and sdmmc2 support.
>
> Signed-off-by: dillon min <dillon.minfei@gmail.com>
> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
> ---
> v5: no changes
>
> arch/arm/dts/stm32h743.dtsi | 30 ++++++++++++++++++++++++++++++
> 1 file changed, 30 insertions(+)
>
> diff --git a/arch/arm/dts/stm32h743.dtsi b/arch/arm/dts/stm32h743.dtsi
> index 8c96698..77a8aef 100644
> --- a/arch/arm/dts/stm32h743.dtsi
> +++ b/arch/arm/dts/stm32h743.dtsi
> @@ -99,6 +99,22 @@
> clocks = <&rcc USART2_CK>;
> };
>
> + usart3: serial at 40004800 {
> + compatible = "st,stm32h7-uart";
> + reg = <0x40004800 0x400>;
> + interrupts = <39>;
> + status = "disabled";
> + clocks = <&rcc USART3_CK>;
> + };
> +
> + uart4: serial at 40004c00 {
> + compatible = "st,stm32h7-uart";
> + reg = <0x40004c00 0x400>;
> + interrupts = <52>;
> + status = "disabled";
> + clocks = <&rcc UART4_CK>;
> + };
> +
> i2c1: i2c at 40005400 {
> compatible = "st,stm32f7-i2c";
> #address-cells = <1>;
> @@ -332,6 +348,20 @@
> max-frequency = <120000000>;
> };
>
> + sdmmc2: sdmmc at 48022400 {
> + compatible = "arm,pl18x", "arm,primecell";
> + arm,primecell-periphid = <0x10153180>;
> + reg = <0x48022400 0x400>;
> + interrupts = <124>;
> + interrupt-names = "cmd_irq";
> + clocks = <&rcc SDMMC2_CK>;
> + clock-names = "apb_pclk";
> + resets = <&rcc STM32H7_AHB2_RESET(SDMMC2)>;
> + cap-sd-highspeed;
> + cap-mmc-highspeed;
> + max-frequency = <120000000>;
> + };
> +
> exti: interrupt-controller at 58000000 {
> compatible = "st,stm32h7-exti";
> interrupt-controller;
>
Applied to u-boot-stm/master
Thanks
Patrice
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH v5 4/7] ARM: dts: stm32: fix i2c node typo in stm32h743, update dmamux1 register
2021-04-09 7:28 ` [PATCH v5 4/7] ARM: dts: stm32: fix i2c node typo in stm32h743, update dmamux1 register dillon.minfei at gmail.com
@ 2021-04-09 9:47 ` Patrice CHOTARD
0 siblings, 0 replies; 15+ messages in thread
From: Patrice CHOTARD @ 2021-04-09 9:47 UTC (permalink / raw)
To: u-boot
Hi Dillon
On 4/9/21 9:28 AM, dillon.minfei at gmail.com wrote:
> From: dillon min <dillon.minfei@gmail.com>
>
> Replace upper case by lower case in i2c nodes name.
> update dmamux1 register range.
>
> Signed-off-by: dillon min <dillon.minfei@gmail.com>
> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
> ---
> v5: no changes
>
> arch/arm/dts/stm32h743.dtsi | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/dts/stm32h743.dtsi b/arch/arm/dts/stm32h743.dtsi
> index 77a8aef..ed68575 100644
> --- a/arch/arm/dts/stm32h743.dtsi
> +++ b/arch/arm/dts/stm32h743.dtsi
> @@ -139,7 +139,7 @@
> status = "disabled";
> };
>
> - i2c3: i2c at 40005C00 {
> + i2c3: i2c at 40005c00 {
> compatible = "st,stm32f7-i2c";
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -254,7 +254,7 @@
>
> dmamux1: dma-router at 40020800 {
> compatible = "st,stm32h7-dmamux";
> - reg = <0x40020800 0x1c>;
> + reg = <0x40020800 0x40>;
> #dma-cells = <3>;
> dma-channels = <16>;
> dma-requests = <128>;
> @@ -386,7 +386,7 @@
> status = "disabled";
> };
>
> - i2c4: i2c at 58001C00 {
> + i2c4: i2c at 58001c00 {
> compatible = "st,stm32f7-i2c";
> #address-cells = <1>;
> #size-cells = <0>;
>
Applied to u-boot-stm/master
Thanks
Patrice
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH v5 5/7] ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6
2021-04-09 7:28 ` [PATCH v5 5/7] ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6 dillon.minfei at gmail.com
@ 2021-04-09 9:47 ` Patrice CHOTARD
0 siblings, 0 replies; 15+ messages in thread
From: Patrice CHOTARD @ 2021-04-09 9:47 UTC (permalink / raw)
To: u-boot
Hi Dillon
On 4/9/21 9:28 AM, dillon.minfei at gmail.com wrote:
> From: dillon min <dillon.minfei@gmail.com>
>
> This patchset has following changes:
>
> - introduce stm32h750.dtsi to support stm32h750 value line
> - add pin groups for usart3/uart4/spi1/sdmmc2
> - add stm32h750i-art-pi.dtb (arch/arm/boot/dts/Makefile)
> - add stm32h750i-art-pi.dts to support art-pi board
> - add stm32h750i-art-pi-u-boot.dtsi to support art-pi board (u-boot)
>
> art-pi board component:
> - 8MiB qspi flash
> - 16MiB spi flash
> - 32MiB sdram
> - ap6212 wifi&bt&fm
>
> the detail board information can be found at:
> https://art-pi.gitee.io/website/
>
> Signed-off-by: dillon min <dillon.minfei@gmail.com>
> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
> ---
> v5: no changes
>
> arch/arm/dts/Makefile | 3 +-
> arch/arm/dts/stm32h7-pinctrl.dtsi | 89 ++++++++++++++
> arch/arm/dts/stm32h750.dtsi | 5 +
> arch/arm/dts/stm32h750i-art-pi-u-boot.dtsi | 81 +++++++++++++
> arch/arm/dts/stm32h750i-art-pi.dts | 188 +++++++++++++++++++++++++++++
> include/dt-bindings/memory/stm32-sdram.h | 2 +
> 6 files changed, 367 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm/dts/stm32h750.dtsi
> create mode 100644 arch/arm/dts/stm32h750i-art-pi-u-boot.dtsi
> create mode 100644 arch/arm/dts/stm32h750i-art-pi.dts
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index c671082..0f54801 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -454,7 +454,8 @@ dtb-$(CONFIG_STM32F7) += stm32f746-disco.dtb \
> stm32f769-disco.dtb \
> stm32746g-eval.dtb
> dtb-$(CONFIG_STM32H7) += stm32h743i-disco.dtb \
> - stm32h743i-eval.dtb
> + stm32h743i-eval.dtb \
> + stm32h750i-art-pi.dtb
>
> dtb-$(CONFIG_MACH_SUN4I) += \
> sun4i-a10-a1000.dtb \
> diff --git a/arch/arm/dts/stm32h7-pinctrl.dtsi b/arch/arm/dts/stm32h7-pinctrl.dtsi
> index f6968b5..aefa324 100644
> --- a/arch/arm/dts/stm32h7-pinctrl.dtsi
> +++ b/arch/arm/dts/stm32h7-pinctrl.dtsi
> @@ -137,6 +137,80 @@
> };
> };
>
> + sdmmc2_b4_pins_a: sdmmc2-b4-0 {
> + pins {
> + pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC1_D0 */
> + <STM32_PINMUX('B', 15, AF9)>, /* SDMMC1_D1 */
> + <STM32_PINMUX('B', 3, AF9)>, /* SDMMC1_D2 */
> + <STM32_PINMUX('B', 4, AF9)>, /* SDMMC1_D3 */
> + <STM32_PINMUX('D', 6, AF11)>, /* SDMMC1_CK */
> + <STM32_PINMUX('D', 7, AF11)>; /* SDMMC1_CMD */
> + slew-rate = <3>;
> + drive-push-pull;
> + bias-disable;
> + };
> + };
> +
> + sdmmc2_b4_od_pins_a: sdmmc2-b4-od-0 {
> + pins1 {
> + pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
> + <STM32_PINMUX('B', 15, AF9)>, /* SDMMC1_D1 */
> + <STM32_PINMUX('B', 3, AF9)>, /* SDMMC1_D2 */
> + <STM32_PINMUX('B', 4, AF9)>, /* SDMMC1_D3 */
> + <STM32_PINMUX('D', 6, AF11)>; /* SDMMC1_CK */
> + slew-rate = <3>;
> + drive-push-pull;
> + bias-disable;
> + };
> + pins2{
> + pinmux = <STM32_PINMUX('D', 7, AF11)>; /* SDMMC1_CMD */
> + slew-rate = <3>;
> + drive-open-drain;
> + bias-disable;
> + };
> + };
> +
> + sdmmc2_b4_sleep_pins_a: sdmmc2-b4-sleep-0 {
> + pins {
> + pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC1_D0 */
> + <STM32_PINMUX('B', 15, ANALOG)>, /* SDMMC1_D1 */
> + <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC1_D2 */
> + <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC1_D3 */
> + <STM32_PINMUX('D', 6, ANALOG)>, /* SDMMC1_CK */
> + <STM32_PINMUX('D', 7, ANALOG)>; /* SDMMC1_CMD */
> + };
> + };
> +
> + spi1_pins: spi1-0 {
> + pins1 {
> + pinmux = <STM32_PINMUX('A', 5, AF5)>,
> + /* SPI1_CLK */
> + <STM32_PINMUX('B', 5, AF5)>;
> + /* SPI1_MOSI */
> + bias-disable;
> + drive-push-pull;
> + slew-rate = <2>;
> + };
> + pins2 {
> + pinmux = <STM32_PINMUX('G', 9, AF5)>;
> + /* SPI1_MISO */
> + bias-disable;
> + };
> + };
> +
> + uart4_pins: uart4-0 {
> + pins1 {
> + pinmux = <STM32_PINMUX('A', 0, AF8)>; /* UART4_TX */
> + bias-disable;
> + drive-push-pull;
> + slew-rate = <0>;
> + };
> + pins2 {
> + pinmux = <STM32_PINMUX('I', 9, AF8)>; /* UART4_RX */
> + bias-disable;
> + };
> + };
> +
> usart1_pins: usart1-0 {
> pins1 {
> pinmux = <STM32_PINMUX('B', 14, AF4)>; /* USART1_TX */
> @@ -163,6 +237,21 @@
> };
> };
>
> + usart3_pins: usart3-0 {
> + pins1 {
> + pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
> + <STM32_PINMUX('D', 12, AF7)>; /* USART3_RTS_DE */
> + bias-disable;
> + drive-push-pull;
> + slew-rate = <0>;
> + };
> + pins2 {
> + pinmux = <STM32_PINMUX('B', 11, AF7)>, /* USART3_RX */
> + <STM32_PINMUX('D', 11, AF7)>; /* USART3_CTS_NSS */
> + bias-disable;
> + };
> + };
> +
> usbotg_hs_pins_a: usbotg-hs-0 {
> pins {
> pinmux = <STM32_PINMUX('H', 4, AF10)>, /* ULPI_NXT */
> diff --git a/arch/arm/dts/stm32h750.dtsi b/arch/arm/dts/stm32h750.dtsi
> new file mode 100644
> index 0000000..99533f3
> --- /dev/null
> +++ b/arch/arm/dts/stm32h750.dtsi
> @@ -0,0 +1,5 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> +/* Copyright (C) STMicroelectronics 2021 - All Rights Reserved */
> +
> +#include "stm32h743.dtsi"
> +
> diff --git a/arch/arm/dts/stm32h750i-art-pi-u-boot.dtsi b/arch/arm/dts/stm32h750i-art-pi-u-boot.dtsi
> new file mode 100644
> index 0000000..326a553
> --- /dev/null
> +++ b/arch/arm/dts/stm32h750i-art-pi-u-boot.dtsi
> @@ -0,0 +1,81 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +
> +#include <stm32h7-u-boot.dtsi>
> +
> +&fmc {
> + /*
> + * Memory configuration from sdram datasheet W9825G6KH
> + * first bank is bank at 0
> + * second bank is bank at 1
> + */
> + bank1: bank at 0 {
> + st,sdram-control = /bits/ 8 <NO_COL_9
> + NO_ROW_13
> + MWIDTH_16
> + BANKS_4
> + CAS_2
> + SDCLK_3
> + RD_BURST_EN
> + RD_PIPE_DL_0>;
> + st,sdram-timing = /bits/ 8 <TMRD_2
> + TXSR_6
> + TRAS_6
> + TRC_6
> + TRP_2
> + TWR_2
> + TRCD_2>;
> + st,sdram-refcount = <677>;
> + };
> +};
> +
> +&pinctrl {
> + fmc_pins: fmc at 0 {
> + pins {
> + pinmux = <STM32_PINMUX('D', 0, AF12)>,
> + <STM32_PINMUX('D', 1, AF12)>,
> + <STM32_PINMUX('D', 8, AF12)>,
> + <STM32_PINMUX('D', 9, AF12)>,
> + <STM32_PINMUX('D',10, AF12)>,
> + <STM32_PINMUX('D',14, AF12)>,
> + <STM32_PINMUX('D',15, AF12)>,
> +
> + <STM32_PINMUX('E', 0, AF12)>,
> + <STM32_PINMUX('E', 1, AF12)>,
> + <STM32_PINMUX('E', 7, AF12)>,
> + <STM32_PINMUX('E', 8, AF12)>,
> + <STM32_PINMUX('E', 9, AF12)>,
> + <STM32_PINMUX('E',10, AF12)>,
> + <STM32_PINMUX('E',11, AF12)>,
> + <STM32_PINMUX('E',12, AF12)>,
> + <STM32_PINMUX('E',13, AF12)>,
> + <STM32_PINMUX('E',14, AF12)>,
> + <STM32_PINMUX('E',15, AF12)>,
> +
> + <STM32_PINMUX('F', 0, AF12)>,
> + <STM32_PINMUX('F', 1, AF12)>,
> + <STM32_PINMUX('F', 2, AF12)>,
> + <STM32_PINMUX('F', 3, AF12)>,
> + <STM32_PINMUX('F', 4, AF12)>,
> + <STM32_PINMUX('F', 5, AF12)>,
> + <STM32_PINMUX('F',11, AF12)>,
> + <STM32_PINMUX('F',12, AF12)>,
> + <STM32_PINMUX('F',13, AF12)>,
> + <STM32_PINMUX('F',14, AF12)>,
> + <STM32_PINMUX('F',15, AF12)>,
> +
> + <STM32_PINMUX('G', 0, AF12)>,
> + <STM32_PINMUX('G', 1, AF12)>,
> + <STM32_PINMUX('G', 2, AF12)>,
> + <STM32_PINMUX('G', 4, AF12)>,
> + <STM32_PINMUX('G', 5, AF12)>,
> + <STM32_PINMUX('G', 8, AF12)>,
> + <STM32_PINMUX('G',15, AF12)>,
> +
> + <STM32_PINMUX('H', 5, AF12)>,
> + <STM32_PINMUX('C', 2, AF12)>,
> + <STM32_PINMUX('C', 3, AF12)>;
> +
> + slew-rate = <3>;
> + };
> + };
> +};
> diff --git a/arch/arm/dts/stm32h750i-art-pi.dts b/arch/arm/dts/stm32h750i-art-pi.dts
> new file mode 100644
> index 0000000..2a4d1cb
> --- /dev/null
> +++ b/arch/arm/dts/stm32h750i-art-pi.dts
> @@ -0,0 +1,188 @@
> +// SPDX-License-Identifier: GPL-2.0+ OR X11
> +/*
> + * Copyright 2021 - Dillon Min <dillon.minfei@gmail.com>
> + *
> + */
> +
> +/dts-v1/;
> +#include "stm32h750.dtsi"
> +#include "stm32h7-pinctrl.dtsi"
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> + model = "RT-Thread STM32H750i-ART-PI board";
> + compatible = "st,stm32h750i-art-pi", "st,stm32h750";
> +
> + chosen {
> + bootargs = "root=/dev/ram";
> + stdout-path = "serial0:2000000n8";
> + };
> +
> + memory at c0000000 {
> + device_type = "memory";
> + reg = <0xc0000000 0x2000000>;
> + };
> +
> + reserved-memory {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + linux,cma {
> + compatible = "shared-dma-pool";
> + no-map;
> + size = <0x100000>;
> + linux,dma-default;
> + };
> + };
> +
> + aliases {
> + serial0 = &uart4;
> + serial1 = &usart3;
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> + led-red {
> + gpios = <&gpioi 8 0>;
> + };
> + led-green {
> + gpios = <&gpioc 15 0>;
> + linux,default-trigger = "heartbeat";
> + };
> + };
> +
> + v3v3: regulator-v3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "v3v3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + wlan_pwr: regulator-wlan {
> + compatible = "regulator-fixed";
> +
> + regulator-name = "wl-reg";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> +
> + gpios = <&gpioc 13 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +};
> +
> +&clk_hse {
> + clock-frequency = <25000000>;
> +};
> +
> +&dma1 {
> + status = "okay";
> +};
> +
> +&dma2 {
> + status = "okay";
> +};
> +
> +&mac {
> + status = "disabled";
> + pinctrl-0 = <ðernet_rmii>;
> + pinctrl-names = "default";
> + phy-mode = "rmii";
> + phy-handle = <&phy0>;
> +
> + mdio0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "snps,dwmac-mdio";
> + phy0: ethernet-phy at 0 {
> + reg = <0>;
> + };
> + };
> +};
> +
> +&sdmmc1 {
> + pinctrl-names = "default", "opendrain", "sleep";
> + pinctrl-0 = <&sdmmc1_b4_pins_a>;
> + pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
> + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
> + broken-cd;
> + st,neg-edge;
> + bus-width = <4>;
> + vmmc-supply = <&v3v3>;
> + status = "okay";
> +};
> +
> +&sdmmc2 {
> + pinctrl-names = "default", "opendrain", "sleep";
> + pinctrl-0 = <&sdmmc2_b4_pins_a>;
> + pinctrl-1 = <&sdmmc2_b4_od_pins_a>;
> + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a>;
> + broken-cd;
> + non-removable;
> + st,neg-edge;
> + bus-width = <4>;
> + vmmc-supply = <&wlan_pwr>;
> + status = "okay";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> + brcmf: bcrmf at 1 {
> + reg = <1>;
> + compatible = "brcm,bcm4329-fmac";
> + };
> +};
> +
> +&spi1 {
> + status = "okay";
> + pinctrl-0 = <&spi1_pins>;
> + pinctrl-names = "default";
> + cs-gpios = <&gpioa 4 GPIO_ACTIVE_LOW>;
> + dmas = <&dmamux1 37 0x400 0x05>,
> + <&dmamux1 38 0x400 0x05>;
> + dma-names = "rx", "tx";
> +
> + flash at 0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "winbond,w25q128", "jedec,spi-nor";
> + reg = <0>;
> + spi-max-frequency = <80000000>;
> +
> + partition at 0 {
> + label = "root filesystem";
> + reg = <0 0x1000000>;
> + };
> + };
> +};
> +
> +&usart2 {
> + pinctrl-0 = <&usart2_pins>;
> + pinctrl-names = "default";
> + status = "disabled";
> +};
> +
> +&usart3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&usart3_pins>;
> + dmas = <&dmamux1 45 0x400 0x05>,
> + <&dmamux1 46 0x400 0x05>;
> + dma-names = "rx", "tx";
> + st,hw-flow-ctrl;
> + status = "okay";
> +
> + bluetooth {
> + compatible = "brcm,bcm43438-bt";
> + host-wakeup-gpios = <&gpioc 0 GPIO_ACTIVE_HIGH>;
> + device-wakeup-gpios = <&gpioi 10 GPIO_ACTIVE_HIGH>;
> + shutdown-gpios = <&gpioi 11 GPIO_ACTIVE_HIGH>;
> + max-speed = <115200>;
> + };
> +};
> +
> +&uart4 {
> + pinctrl-0 = <&uart4_pins>;
> + pinctrl-names = "default";
> + status = "okay";
> +};
> diff --git a/include/dt-bindings/memory/stm32-sdram.h b/include/dt-bindings/memory/stm32-sdram.h
> index ab91d2b..90ef2e1 100644
> --- a/include/dt-bindings/memory/stm32-sdram.h
> +++ b/include/dt-bindings/memory/stm32-sdram.h
> @@ -34,8 +34,10 @@
> #define TXSR_1 (1 - 1)
> #define TXSR_6 (6 - 1)
> #define TXSR_7 (7 - 1)
> +#define TXSR_8 (8 - 1)
> #define TRAS_1 (1 - 1)
> #define TRAS_4 (4 - 1)
> +#define TRAS_6 (6 - 1)
> #define TRC_6 (6 - 1)
> #define TWR_1 (1 - 1)
> #define TWR_2 (2 - 1)
>
Applied to u-boot-stm/master
Thanks
Patrice
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH v5 6/7] ram: stm32: fix strsep failed on read only memory
2021-04-09 7:28 ` [PATCH v5 6/7] ram: stm32: fix strsep failed on read only memory dillon.minfei at gmail.com
@ 2021-04-09 9:47 ` Patrice CHOTARD
0 siblings, 0 replies; 15+ messages in thread
From: Patrice CHOTARD @ 2021-04-09 9:47 UTC (permalink / raw)
To: u-boot
Hi Dillon
On 4/9/21 9:28 AM, dillon.minfei at gmail.com wrote:
> From: dillon min <dillon.minfei@gmail.com>
>
> strsep will change data from original memory address,
> in case the memory is in non-sdram/sram place, will
> run into a bug(hang at SDRAM: )
>
> just add a temporary array to store bank_name[] to fix this
> bug.
>
> Signed-off-by: dillon min <dillon.minfei@gmail.com>
> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
> ---
> v5: no changes
>
> drivers/ram/stm32_sdram.c | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/drivers/ram/stm32_sdram.c b/drivers/ram/stm32_sdram.c
> index 540ad85..3e25cc7 100644
> --- a/drivers/ram/stm32_sdram.c
> +++ b/drivers/ram/stm32_sdram.c
> @@ -268,6 +268,7 @@ static int stm32_fmc_of_to_plat(struct udevice *dev)
> u32 swp_fmc;
> ofnode bank_node;
> char *bank_name;
> + char _bank_name[128] = {0};
> u8 bank = 0;
> int ret;
>
> @@ -300,6 +301,8 @@ static int stm32_fmc_of_to_plat(struct udevice *dev)
> dev_for_each_subnode(bank_node, dev) {
> /* extract the bank index from DT */
> bank_name = (char *)ofnode_get_name(bank_node);
> + strlcpy(_bank_name, bank_name, sizeof(_bank_name));
> + bank_name = (char *)_bank_name;
> strsep(&bank_name, "@");
> if (!bank_name) {
> pr_err("missing sdram bank index");
>
Applied to u-boot-stm/master
Thanks
Patrice
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH v5 7/7] board: Add rt-thread art-pi board support
2021-04-09 7:28 ` [PATCH v5 7/7] board: Add rt-thread art-pi board support dillon.minfei at gmail.com
@ 2021-04-09 9:47 ` Patrice CHOTARD
0 siblings, 0 replies; 15+ messages in thread
From: Patrice CHOTARD @ 2021-04-09 9:47 UTC (permalink / raw)
To: u-boot
Hi Dillon
On 4/9/21 9:28 AM, dillon.minfei at gmail.com wrote:
> From: dillon min <dillon.minfei@gmail.com>
>
> All these files are add for support rt-thread art-pi board
> - add board/st/stm32h750-art-pi, defconfig, header support for u-boot
>
> for more information about art-pi, please goto:
> https://art-pi.gitee.io/website/
>
> Signed-off-by: dillon min <dillon.minfei@gmail.com>
> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
> ---
> v5: remove "for STMicroelectronics." from Author(s) description
>
> arch/arm/mach-stm32/stm32h7/Kconfig | 4 ++
> board/st/stm32h750-art-pi/Kconfig | 19 +++++++++
> board/st/stm32h750-art-pi/MAINTAINERS | 7 ++++
> board/st/stm32h750-art-pi/Makefile | 6 +++
> board/st/stm32h750-art-pi/stm32h750-art-pi.c | 58 ++++++++++++++++++++++++++++
> configs/stm32h750-art-pi_defconfig | 51 ++++++++++++++++++++++++
> include/configs/stm32h750-art-pi.h | 48 +++++++++++++++++++++++
> 7 files changed, 193 insertions(+)
> create mode 100644 board/st/stm32h750-art-pi/Kconfig
> create mode 100644 board/st/stm32h750-art-pi/MAINTAINERS
> create mode 100644 board/st/stm32h750-art-pi/Makefile
> create mode 100644 board/st/stm32h750-art-pi/stm32h750-art-pi.c
> create mode 100644 configs/stm32h750-art-pi_defconfig
> create mode 100644 include/configs/stm32h750-art-pi.h
>
> diff --git a/arch/arm/mach-stm32/stm32h7/Kconfig b/arch/arm/mach-stm32/stm32h7/Kconfig
> index 55e6217..70233a4 100644
> --- a/arch/arm/mach-stm32/stm32h7/Kconfig
> +++ b/arch/arm/mach-stm32/stm32h7/Kconfig
> @@ -6,7 +6,11 @@ config TARGET_STM32H743_DISCO
> config TARGET_STM32H743_EVAL
> bool "STM32H743 Evaluation board"
>
> +config TARGET_STM32H750_ART_PI
> + bool "STM32H750 ART Pi board"
> +
> source "board/st/stm32h743-eval/Kconfig"
> source "board/st/stm32h743-disco/Kconfig"
> +source "board/st/stm32h750-art-pi/Kconfig"
>
> endif
> diff --git a/board/st/stm32h750-art-pi/Kconfig b/board/st/stm32h750-art-pi/Kconfig
> new file mode 100644
> index 0000000..c31b984
> --- /dev/null
> +++ b/board/st/stm32h750-art-pi/Kconfig
> @@ -0,0 +1,19 @@
> +if TARGET_STM32H750_ART_PI
> +
> +config SYS_BOARD
> + string
> + default "stm32h750-art-pi"
> +
> +config SYS_VENDOR
> + string
> + default "st"
> +
> +config SYS_SOC
> + string
> + default "stm32h7"
> +
> +config SYS_CONFIG_NAME
> + string
> + default "stm32h750-art-pi"
> +
> +endif
> diff --git a/board/st/stm32h750-art-pi/MAINTAINERS b/board/st/stm32h750-art-pi/MAINTAINERS
> new file mode 100644
> index 0000000..9578833
> --- /dev/null
> +++ b/board/st/stm32h750-art-pi/MAINTAINERS
> @@ -0,0 +1,7 @@
> +STM32H750 ART PI BOARD
> +M: Dillon Min <dillon.minfei@gmail.com>
> +S: Maintained
> +F: board/st/stm32h750-art-pi
> +F: include/configs/stm32h750-art-pi.h
> +F: configs/stm32h750-art-pi_defconfig
> +F: arch/arm/dts/stm32h7*
> diff --git a/board/st/stm32h750-art-pi/Makefile b/board/st/stm32h750-art-pi/Makefile
> new file mode 100644
> index 0000000..a06de87
> --- /dev/null
> +++ b/board/st/stm32h750-art-pi/Makefile
> @@ -0,0 +1,6 @@
> +# SPDX-License-Identifier: GPL-2.0+
> +#
> +# Copyright (C) 2021, RT-Thread - All Rights Reserved
> +# Author(s): Dillon Min, <dillon.minfei@gmail.com> for RT-Thread.
> +
> +obj-y := stm32h750-art-pi.o
> diff --git a/board/st/stm32h750-art-pi/stm32h750-art-pi.c b/board/st/stm32h750-art-pi/stm32h750-art-pi.c
> new file mode 100644
> index 0000000..5785b2e
> --- /dev/null
> +++ b/board/st/stm32h750-art-pi/stm32h750-art-pi.c
> @@ -0,0 +1,58 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2021, STMicroelectronics - All Rights Reserved
> + * Author(s): Dillon Min <dillon.minfei@gmail.com>
> + */
> +
> +#include <common.h>
> +#include <dm.h>
> +#include <init.h>
> +#include <log.h>
> +#include <asm/global_data.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +int dram_init(void)
> +{
> + struct udevice *dev;
> + int ret;
> +
> + ret = uclass_get_device(UCLASS_RAM, 0, &dev);
> + if (ret) {
> + debug("DRAM init failed: %d\n", ret);
> + return ret;
> + }
> +
> + if (fdtdec_setup_mem_size_base() != 0)
> + ret = -EINVAL;
> +
> + return ret;
> +}
> +
> +int dram_init_banksize(void)
> +{
> + fdtdec_setup_memory_banksize();
> +
> + return 0;
> +}
> +
> +int board_early_init_f(void)
> +{
> + return 0;
> +}
> +
> +u32 get_board_rev(void)
> +{
> + return 0;
> +}
> +
> +int board_late_init(void)
> +{
> + return 0;
> +}
> +
> +int board_init(void)
> +{
> + gd->bd->bi_boot_params = gd->bd->bi_dram[0].start + 0x100;
> + return 0;
> +}
> diff --git a/configs/stm32h750-art-pi_defconfig b/configs/stm32h750-art-pi_defconfig
> new file mode 100644
> index 0000000..447af5b
> --- /dev/null
> +++ b/configs/stm32h750-art-pi_defconfig
> @@ -0,0 +1,51 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_STM32=y
> +CONFIG_SYS_TEXT_BASE=0x90000000
> +CONFIG_SYS_MALLOC_F_LEN=0xF00
> +CONFIG_NR_DRAM_BANKS=1
> +CONFIG_ENV_SIZE=0x2000
> +CONFIG_STM32H7=y
> +CONFIG_TARGET_STM32H750_ART_PI=y
> +CONFIG_DEFAULT_DEVICE_TREE="stm32h750i-art-pi"
> +CONFIG_DISTRO_DEFAULTS=y
> +CONFIG_BOOTDELAY=3
> +CONFIG_AUTOBOOT_KEYED=y
> +CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n"
> +CONFIG_AUTOBOOT_STOP_STR=" "
> +# CONFIG_USE_BOOTCOMMAND is not set
> +CONFIG_DEFAULT_FDT_FILE="stm32h750i-art-pi"
> +# CONFIG_DISPLAY_CPUINFO is not set
> +CONFIG_BOARD_EARLY_INIT_F=y
> +CONFIG_BOARD_LATE_INIT=y
> +CONFIG_SYS_PROMPT="U-Boot > "
> +CONFIG_CMD_GPT=y
> +CONFIG_CMD_MMC=y
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_CMD_CACHE=y
> +CONFIG_CMD_TIMER=y
> +CONFIG_CMD_EXT4_WRITE=y
> +# CONFIG_ISO_PARTITION is not set
> +CONFIG_OF_CONTROL=y
> +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> +# CONFIG_NET is not set
> +CONFIG_DM_MMC=y
> +CONFIG_STM32_SDMMC2=y
> +# CONFIG_PINCTRL_FULL is not set
> +CONFIG_OF_LIBFDT_OVERLAY=y
> +CONFIG_BAUDRATE=2000000
> +CONFIG_USE_BOOTARGS=y
> +CONFIG_BOOTARGS="console=ttySTM0,2000000 root=/dev/ram loglevel=8"
> +CONFIG_BOOTCOMMAND="bootm 90080000"
> +CONFIG_REQUIRE_SERIAL_CONSOLE=y
> +CONFIG_SERIAL_PRESENT=y
> +CONFIG_DM_SERIAL=y
> +CONFIG_STM32_SERIAL=y
> +CONFIG_FIT=y
> +CONFIG_FIT_EXTERNAL_OFFSET=0x0
> +CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
> +CONFIG_FIT_FULL_CHECK=y
> +CONFIG_FIT_PRINT=y
> +CONFIG_LEGACY_IMAGE_FORMAT=y
> +CONFIG_SUPPORT_RAW_INITRD=y
> +CONFIG_USE_BOOTCOMMAND=y
> +CONFIG_DM_DMA=y
> diff --git a/include/configs/stm32h750-art-pi.h b/include/configs/stm32h750-art-pi.h
> new file mode 100644
> index 0000000..3fd5461
> --- /dev/null
> +++ b/include/configs/stm32h750-art-pi.h
> @@ -0,0 +1,48 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * Copyright (C) 2021, STMicroelectronics - All Rights Reserved
> + * Author(s): Dillon Min <dillon.minfei@gmail.com>
> + */
> +
> +#ifndef __CONFIG_H
> +#define __CONFIG_H
> +
> +#include <config.h>
> +#include <linux/sizes.h>
> +
> +/* For booting Linux, use the first 16MB of memory */
> +#define CONFIG_SYS_BOOTMAPSZ (SZ_16M + SZ_8M)
> +
> +#define CONFIG_SYS_FLASH_BASE 0x90000000
> +#define CONFIG_SYS_INIT_SP_ADDR 0x24040000
> +
> +/*
> + * Configuration of the external SDRAM memory
> + */
> +#define CONFIG_SYS_LOAD_ADDR 0xC1800000
> +#define CONFIG_LOADADDR 0xC1800000
> +
> +#define CONFIG_SYS_HZ_CLOCK 1000000
> +
> +#define CONFIG_CMDLINE_TAG
> +#define CONFIG_SETUP_MEMORY_TAGS
> +#define CONFIG_INITRD_TAG
> +#define CONFIG_REVISION_TAG
> +
> +#define CONFIG_SYS_MAXARGS 16
> +#define CONFIG_SYS_MALLOC_LEN (1 * 1024 * 1024)
> +
> +#define BOOT_TARGET_DEVICES(func) \
> + func(MMC, mmc, 0)
> +
> +#include <config_distro_bootcmd.h>
> +#define CONFIG_EXTRA_ENV_SETTINGS \
> + "kernel_addr_r=0xC0008000\0" \
> + "fdtfile=stm32h750i-art-pi.dtb\0" \
> + "fdt_addr_r=0xC0408000\0" \
> + "scriptaddr=0xC0418000\0" \
> + "pxefile_addr_r=0xC0428000\0" \
> + "ramdisk_addr_r=0xC0438000\0" \
> + BOOTENV
> +
> +#endif /* __CONFIG_H */
>
Applied to u-boot-stm/master
Thanks
Patrice
^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2021-04-09 9:47 UTC | newest]
Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-09 7:28 [PATCH v5 0/7] Add rt-thread art-pi board support dillon.minfei at gmail.com
2021-04-09 7:28 ` [PATCH v5 1/7] ARM: dts: stm32: split sdram pin & timing parameter into specific board dts dillon.minfei at gmail.com
2021-04-09 9:46 ` Patrice CHOTARD
2021-04-09 7:28 ` [PATCH v5 2/7] ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h750 dillon.minfei at gmail.com
2021-04-09 9:47 ` Patrice CHOTARD
2021-04-09 7:28 ` [PATCH v5 3/7] ARM: dts: stm32: add new instances for stm32h743 MCU dillon.minfei at gmail.com
2021-04-09 9:47 ` Patrice CHOTARD
2021-04-09 7:28 ` [PATCH v5 4/7] ARM: dts: stm32: fix i2c node typo in stm32h743, update dmamux1 register dillon.minfei at gmail.com
2021-04-09 9:47 ` Patrice CHOTARD
2021-04-09 7:28 ` [PATCH v5 5/7] ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6 dillon.minfei at gmail.com
2021-04-09 9:47 ` Patrice CHOTARD
2021-04-09 7:28 ` [PATCH v5 6/7] ram: stm32: fix strsep failed on read only memory dillon.minfei at gmail.com
2021-04-09 9:47 ` Patrice CHOTARD
2021-04-09 7:28 ` [PATCH v5 7/7] board: Add rt-thread art-pi board support dillon.minfei at gmail.com
2021-04-09 9:47 ` Patrice CHOTARD
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.