[PATCH V3 0/5] Add PMIC DT files for sc7280

[PATCH V3 0/5] Add PMIC DT files for sc7280

[satya priya]

Add PM7325 DT file with gpio and temp-alarm nodes.
For PM8350C, PMR735A and PMK8350 add the required peripherals
as the base DT files are already added [1].
[1] https://lore.kernel.org/patchwork/project/lkml/list/?series=489011&state=%2A&archive=both

Changes in V2:
 - As per Matthias comments:
   - I've Split the patch into per-PMIC patches and one sc7280 patch
   - Removed 2nd critical point, thermal-governer property
   - s/pm8325_tz/pm7325_temp_alarm and s/pm7325_temp_alarm/pm7325_thermal
   - Fixed few other minor errors.

 - As per Bjorn's comments, replaced '_' with '-' in node names and moved
   DT files inclusion to board dts.

Changes in V3:
 - As per Matthias comments, changed commit text, modified criticl interrupt
   node name like <name>-crit for all pmics.
 - Moved pmk8350_vadc channel nodes to idp dts, as it is not guaranteed that
   a board with the pmk8350 will always have the other 3 PMICs

satya priya (5):
  arm64: dts: qcom: pm7325: Add pm7325 base dts file
  arm64: dts: qcom: pm8350c: Add temp-alarm support
  arm64: dts: qcom: pmr735a: Add temp-alarm support
  arm64: dts: qcom: pmk8350: Add PMIC peripherals for pmk8350
  arm64: dts: qcom: sc7280: Include PMIC DT files for sc7280

 arch/arm64/boot/dts/qcom/pm7325.dtsi    | 53 +++++++++++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/pm8350c.dtsi   | 32 ++++++++++++++++++-
 arch/arm64/boot/dts/qcom/pmk8350.dtsi   | 55 ++++++++++++++++++++++++++++++++-
 arch/arm64/boot/dts/qcom/pmr735a.dtsi   | 32 ++++++++++++++++++-
 arch/arm64/boot/dts/qcom/sc7280-idp.dts | 30 ++++++++++++++++++
 arch/arm64/boot/dts/qcom/sc7280.dtsi    |  3 ++
 6 files changed, 202 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm64/boot/dts/qcom/pm7325.dtsi

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
of Code Aurora Forum, hosted by The Linux Foundation

[PATCH V3 1/5] arm64: dts: qcom: pm7325: Add pm7325 base dts file

[satya priya]

Add base DTS file for pm7325 along with GPIOs and temp-alarm nodes.

Signed-off-by: satya priya <skakit@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/pm7325.dtsi | 53 ++++++++++++++++++++++++++++++++++++
 1 file changed, 53 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/pm7325.dtsi

diff --git a/arch/arm64/boot/dts/qcom/pm7325.dtsi b/arch/arm64/boot/dts/qcom/pm7325.dtsi
new file mode 100644
index 0000000..e7f64a9
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm7325.dtsi
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: BSD-3-Clause
+// Copyright (c) 2021, The Linux Foundation. All rights reserved.
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pm7325: pmic@1 {
+		compatible = "qcom,pm7325", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm7325_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm7325_gpios: gpios@8800 {
+			compatible = "qcom,pm7325-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pm7325_gpios 0 0 10>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
+
+&thermal_zones {
+	pm7325_thermal: pm7325-thermal {
+		polling-delay-passive = <100>;
+		polling-delay = <0>;
+		thermal-sensors = <&pm7325_temp_alarm>;
+
+		trips {
+			pm7325_trip0: trip0 {
+				temperature = <95000>;
+				hysteresis = <0>;
+				type = "passive";
+			};
+
+			pm7325_crit: pm7325-crit {
+				temperature = <115000>;
+				hysteresis = <0>;
+				type = "critical";
+			};
+		};
+	};
+};
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
of Code Aurora Forum, hosted by The Linux Foundation

Re: [PATCH V3 1/5] arm64: dts: qcom: pm7325: Add pm7325 base dts file

[Matthias Kaehlcke]

On Wed, Apr 14, 2021 at 02:04:22PM +0530, satya priya wrote:
> Add base DTS file for pm7325 along with GPIOs and temp-alarm nodes.
> 
> Signed-off-by: satya priya <skakit@codeaurora.org>

Reviewed-by: Matthias Kaehlcke <mka@chromium.org>

[PATCH V3 2/5] arm64: dts: qcom: pm8350c: Add temp-alarm support

[satya priya]

Add temp-alarm node for PM8350C pmic and also modify gpio
node to add gpio ranges and "qcom,spmi-gpio" compatible.

Signed-off-by: satya priya <skakit@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/pm8350c.dtsi | 32 +++++++++++++++++++++++++++++++-
 1 file changed, 31 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/pm8350c.dtsi b/arch/arm64/boot/dts/qcom/pm8350c.dtsi
index 2b9b75e..e1b75ae 100644
--- a/arch/arm64/boot/dts/qcom/pm8350c.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8350c.dtsi
@@ -13,13 +13,43 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pm8350c_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
 		pm8350c_gpios: gpio@8800 {
-			compatible = "qcom,pm8350c-gpio";
+			compatible = "qcom,pm8350c-gpio", "qcom,spmi-gpio";
 			reg = <0x8800>;
 			gpio-controller;
+			gpio-ranges = <&pm8350c_gpios 0 0 9>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 		};
 	};
 };
+
+&thermal_zones {
+	pm8350c_thermal: pm8350c-thermal {
+		polling-delay-passive = <100>;
+		polling-delay = <0>;
+		thermal-sensors = <&pm8350c_temp_alarm>;
+
+		trips {
+			pm8350c_trip0: trip0 {
+				temperature = <95000>;
+				hysteresis = <0>;
+				type = "passive";
+			};
+
+			pm8350c_crit: pm8350c-crit {
+				temperature = <115000>;
+				hysteresis = <0>;
+				type = "critical";
+			};
+		};
+	};
+};
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
of Code Aurora Forum, hosted by The Linux Foundation

Re: [PATCH V3 2/5] arm64: dts: qcom: pm8350c: Add temp-alarm support

[Matthias Kaehlcke]

On Wed, Apr 14, 2021 at 02:04:23PM +0530, satya priya wrote:
> Add temp-alarm node for PM8350C pmic and also modify gpio
> node to add gpio ranges and "qcom,spmi-gpio" compatible.
> 
> Signed-off-by: satya priya <skakit@codeaurora.org>
> ---
>  arch/arm64/boot/dts/qcom/pm8350c.dtsi | 32 +++++++++++++++++++++++++++++++-
>  1 file changed, 31 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/pm8350c.dtsi b/arch/arm64/boot/dts/qcom/pm8350c.dtsi
> index 2b9b75e..e1b75ae 100644
> --- a/arch/arm64/boot/dts/qcom/pm8350c.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm8350c.dtsi
> @@ -13,13 +13,43 @@
>  		#address-cells = <1>;
>  		#size-cells = <0>;
>  
> +		pm8350c_temp_alarm: temp-alarm@a00 {
> +			compatible = "qcom,spmi-temp-alarm";
> +			reg = <0xa00>;
> +			interrupts = <0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
> +			#thermal-sensor-cells = <0>;
> +		};
> +
>  		pm8350c_gpios: gpio@8800 {
> -			compatible = "qcom,pm8350c-gpio";
> +			compatible = "qcom,pm8350c-gpio", "qcom,spmi-gpio";
>  			reg = <0x8800>;
>  			gpio-controller;
> +			gpio-ranges = <&pm8350c_gpios 0 0 9>;

a separate patch for this would probably be preferable, but I guess it's ok

Reviewed-by: Matthias Kaehlcke <mka@chromium.org>

[PATCH V3 3/5] arm64: dts: qcom: pmr735a: Add temp-alarm support

[satya priya]

Add temp-alarm node for PMR735A pmic and also modify gpio
node to add gpio ranges and "qcom,spmi-gpio" compatible.

Signed-off-by: satya priya <skakit@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/pmr735a.dtsi | 32 +++++++++++++++++++++++++++++++-
 1 file changed, 31 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/pmr735a.dtsi b/arch/arm64/boot/dts/qcom/pmr735a.dtsi
index 1c675af1..b4b6ba24 100644
--- a/arch/arm64/boot/dts/qcom/pmr735a.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmr735a.dtsi
@@ -13,13 +13,43 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pmr735a_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
 		pmr735a_gpios: gpio@8800 {
-			compatible = "qcom,pmr735a-gpio";
+			compatible = "qcom,pmr735a-gpio", "qcom,spmi-gpio";
 			reg = <0x8800>;
 			gpio-controller;
+			gpio-ranges = <&pmr735a_gpios 0 0 4>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 		};
 	};
 };
+
+&thermal_zones {
+	pmr735a_thermal: pmr735a-thermal {
+		polling-delay-passive = <100>;
+		polling-delay = <0>;
+		thermal-sensors = <&pmr735a_temp_alarm>;
+
+		trips {
+			pmr735a_trip0: trip0 {
+				temperature = <95000>;
+				hysteresis = <0>;
+				type = "passive";
+			};
+
+			pmr735a_crit: pmr735a-crit {
+				temperature = <115000>;
+				hysteresis = <0>;
+				type = "critical";
+			};
+		};
+	};
+};
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
of Code Aurora Forum, hosted by The Linux Foundation

[PATCH V3 4/5] arm64: dts: qcom: pmk8350: Add PMIC peripherals for pmk8350

[satya priya]

Add PON, RTC and other PMIC infra modules support for PMK8350.

Signed-off-by: satya priya <skakit@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/pmk8350.dtsi | 49 ++++++++++++++++++++++++++++++++++-
 1 file changed, 48 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/pmk8350.dtsi b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
index 1530b8f..dee5384 100644
--- a/arch/arm64/boot/dts/qcom/pmk8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
@@ -13,10 +13,57 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pmk8350_pon: pon@1300 {
+			compatible = "qcom,pm8998-pon";
+			reg = <0x1300>;
+
+			pwrkey {
+				compatible = "qcom,pmk8350-pwrkey";
+				interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
+				linux,code = <KEY_POWER>;
+			};
+
+			resin {
+				compatible = "qcom,pmk8350-resin";
+				interrupts = <0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
+				linux,code = <KEY_VOLUMEDOWN>;
+			};
+		};
+
+		pmk8350_vadc: adc@3100 {
+			compatible = "qcom,spmi-adc7";
+			reg = <0x3100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "eoc-int-en-set";
+			#io-channel-cells = <1>;
+			io-channel-ranges;
+		};
+
+		pmk8350_adc_tm: adc-tm@3400 {
+			compatible = "qcom,adc-tm7";
+			reg = <0x3400>;
+			interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "threshold";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#thermal-sensor-cells = <1>;
+			status = "disabled";
+		};
+
+		pmk8350_rtc: rtc@6100 {
+			compatible = "qcom,pmk8350-rtc";
+			reg = <0x6100>, <0x6200>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
+		};
+
 		pmk8350_gpios: gpio@b000 {
-			compatible = "qcom,pmk8350-gpio";
+			compatible = "qcom,pmk8350-gpio", "qcom,spmi-gpio";
 			reg = <0xb000>;
 			gpio-controller;
+			gpio-ranges = <&pmk8350_gpios 0 0 4>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
of Code Aurora Forum, hosted by The Linux Foundation

[PATCH V3 5/5] arm64: dts: qcom: sc7280: Include PMIC DT files for sc7280

[satya priya]

Include pm7325, pm8350c, pmk8350 and pmr735a DT files. Add
channel nodes for pmk8350_vadc. Also, add the thermal_zones
node in dtsi.

Signed-off-by: satya priya <skakit@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/pmk8350.dtsi   |  6 ++++++
 arch/arm64/boot/dts/qcom/sc7280-idp.dts | 30 ++++++++++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/sc7280.dtsi    |  3 +++
 3 files changed, 39 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/pmk8350.dtsi b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
index dee5384..bbd9fa7 100644
--- a/arch/arm64/boot/dts/qcom/pmk8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
@@ -3,6 +3,12 @@
  * Copyright (c) 2021, Linaro Limited
  */
 
+#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmr735b.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
 
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
index 950ecb2..9293502 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
@@ -8,6 +8,10 @@
 /dts-v1/;
 
 #include "sc7280.dtsi"
+#include "pm7325.dtsi"
+#include "pm8350c.dtsi"
+#include "pmk8350.dtsi"
+#include "pmr735a.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. sc7280 IDP platform";
@@ -22,6 +26,32 @@
 	};
 };
 
+&pmk8350_vadc {
+		pm8350_die_temp {
+			reg = <PM8350_ADC7_DIE_TEMP>;
+			label = "pm8350_die_temp";
+			qcom,pre-scaling = <1 1>;
+		};
+
+		pmk8350_die_temp {
+			reg = <PMK8350_ADC7_DIE_TEMP>;
+			label = "pmk8350_die_temp";
+			qcom,pre-scaling = <1 1>;
+		};
+
+		pmr735a_die_temp {
+			reg = <PMR735A_ADC7_DIE_TEMP>;
+			label = "pmr735a_die_temp";
+			qcom,pre-scaling = <1 1>;
+		};
+
+		pmr735b_die_temp {
+			reg = <PMR735B_ADC7_DIE_TEMP>;
+			label = "pmr735b_die_temp";
+			qcom,pre-scaling = <1 1>;
+		};
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 39cf0be..0f4fd33 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -605,4 +605,7 @@
 			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
 			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
 	};
+
+	thermal_zones: thermal-zones {
+	};
 };
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
of Code Aurora Forum, hosted by The Linux Foundation