All of lore.kernel.org
 help / color / mirror / Atom feed
From: Maharaja Kennadyrajan <mkenna@codeaurora.org>
To: ath11k@lists.infradead.org, linux-wireless@vger.kernel.org
Cc: Maharaja Kennadyrajan <mkenna@codeaurora.org>
Subject: [PATCH v2 0/3] Add support to configure beacon tx mode
Date: Thu, 29 Apr 2021 17:17:51 +0530	[thread overview]
Message-ID: <1619696874-30072-1-git-send-email-mkenna@codeaurora.org> (raw)

Add support to configure the beacon tx mode as STAGGERED
or BURST mode via hostapd configuration during the AP
bring-up or via wpa_suppplicant configuration during MESH
bring-up.

Beacons can be sent out in burst(continuously in a single shot
one after another) or staggered (equally spread out over beacon
interval) mode.

V2:
	Addressed Johannes's comment on v1 patch.
	Updated the commit log.

Maharaja Kennadyrajan (3):
  nl80211: Add support for beacon tx mode
  mac80211: Add support for beacon tx mode
  ath11k: Add support for beacon tx mode

 drivers/net/wireless/ath/ath11k/mac.c | 10 +++++++---
 include/net/cfg80211.h                |  4 ++++
 include/net/mac80211.h                |  2 ++
 include/uapi/linux/nl80211.h          | 15 +++++++++++++++
 net/mac80211/cfg.c                    |  2 ++
 net/wireless/nl80211.c                |  9 +++++++++
 6 files changed, 39 insertions(+), 3 deletions(-)

-- 
2.7.4


WARNING: multiple messages have this Message-ID (diff)
From: Maharaja Kennadyrajan <mkenna@codeaurora.org>
To: ath11k@lists.infradead.org, linux-wireless@vger.kernel.org
Cc: Maharaja Kennadyrajan <mkenna@codeaurora.org>
Subject: [PATCH v2 0/3] Add support to configure beacon tx mode
Date: Thu, 29 Apr 2021 17:17:51 +0530	[thread overview]
Message-ID: <1619696874-30072-1-git-send-email-mkenna@codeaurora.org> (raw)

Add support to configure the beacon tx mode as STAGGERED
or BURST mode via hostapd configuration during the AP
bring-up or via wpa_suppplicant configuration during MESH
bring-up.

Beacons can be sent out in burst(continuously in a single shot
one after another) or staggered (equally spread out over beacon
interval) mode.

V2:
	Addressed Johannes's comment on v1 patch.
	Updated the commit log.

Maharaja Kennadyrajan (3):
  nl80211: Add support for beacon tx mode
  mac80211: Add support for beacon tx mode
  ath11k: Add support for beacon tx mode

 drivers/net/wireless/ath/ath11k/mac.c | 10 +++++++---
 include/net/cfg80211.h                |  4 ++++
 include/net/mac80211.h                |  2 ++
 include/uapi/linux/nl80211.h          | 15 +++++++++++++++
 net/mac80211/cfg.c                    |  2 ++
 net/wireless/nl80211.c                |  9 +++++++++
 6 files changed, 39 insertions(+), 3 deletions(-)

-- 
2.7.4


-- 
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k

             reply	other threads:[~2021-04-29 11:48 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-29 11:47 Maharaja Kennadyrajan [this message]
2021-04-29 11:47 ` [PATCH v2 0/3] Add support to configure beacon tx mode Maharaja Kennadyrajan
2021-04-29 11:47 ` [PATCH v2 1/3] nl80211: Add support for " Maharaja Kennadyrajan
2021-04-29 11:47   ` Maharaja Kennadyrajan
2021-05-03 17:24   ` jjohnson
2021-05-03 17:24     ` jjohnson
2021-05-05  7:18     ` Maharaja Kennadyrajan
2021-05-05  7:18       ` Maharaja Kennadyrajan
2021-05-05 14:27       ` jjohnson
2021-05-05 14:27         ` jjohnson
2021-04-29 11:47 ` [PATCH v2 2/3] mac80211: " Maharaja Kennadyrajan
2021-04-29 11:47   ` Maharaja Kennadyrajan
2021-04-29 11:47 ` [PATCH v2 3/3] ath11k: " Maharaja Kennadyrajan
2021-04-29 11:47   ` Maharaja Kennadyrajan
2021-04-30  7:15 ` [PATCH v2 0/3] Add support to configure " Sven Eckelmann
2021-04-30  7:15   ` Sven Eckelmann
2021-05-26 14:13   ` Maharaja Kennadyrajan
2021-05-26 14:13     ` Maharaja Kennadyrajan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1619696874-30072-1-git-send-email-mkenna@codeaurora.org \
    --to=mkenna@codeaurora.org \
    --cc=ath11k@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.