* [Bug 1860742] Re: xv6 Bootloop
2020-01-24 4:03 [Bug 1860742] [NEW] xv6 Bootloop Logan Bateman
@ 2020-01-24 4:12 ` Logan Bateman
2020-02-18 17:40 ` Mohammadreza Ghofrani
` (4 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Logan Bateman @ 2020-01-24 4:12 UTC (permalink / raw)
To: qemu-devel
** Description changed:
Qemu Version: 4.2.0
- Launch command:
+ Launch command:
qemu-system-x86_64 -nographic -drive file=fs.img,index=1,media=disk,format=raw -drive file=xv6.img,index=0,media=disk,format=raw -smp 2 -m 512
- How to reproduce?
+ How to reproduce?
1.) Use/install latest release of qemu (4.2.0 at time of writing)
2.) Download, build, and run xv6 (a simple os designed for learning
operating systems fundamentals)
cd /tmp
git clone https://github.com/mit-pdos/xv6-public.git
cd xv6-public
make qemu-nox
3.) Qemu should now bootloop (seem to try to boot but then just
repeat). This is what it looks like below before it repeats:
SeaBIOS (version ?-20191223_100556-anatol)
- iPXE (http://ipxe.org) 00:03.0 CA00 PCI2.10 PnP PMM+1FF92A50+1FEF2A50 CA00
-
+ iPXE (http://ipxe.org) 00:03.0 CA00 PCI2.10 PnP PMM+1FF92A50+1FEF2A50
+ CA00
+
Booting from Hard Disk..
-
Host: Arch Linux - Kernel version: 5.4.13
Guest: xv6 (https://github.com/mit-pdos/xv6-public)
Suspicion:
- When I was using qemu 2.11.1 inside docker, the xv6 os booted with no
- problem. I am thinking that something changed between Qemu 2.11.1 and
- Qemu 4.2.0 which is now causing boot problems.
+ When I was using qemu 2.11.1 inside an ubuntu docker container, the xv6
+ os booted with no problem. I am thinking that something changed between
+ Qemu 2.11.1 and Qemu 4.2.0 which is now causing boot problems.
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1860742
Title:
xv6 Bootloop
Status in QEMU:
New
Bug description:
Qemu Version: 4.2.0
Launch command:
qemu-system-x86_64 -nographic -drive file=fs.img,index=1,media=disk,format=raw -drive file=xv6.img,index=0,media=disk,format=raw -smp 2 -m 512
How to reproduce?
1.) Use/install latest release of qemu (4.2.0 at time of writing)
2.) Download, build, and run xv6 (a simple os designed for learning
operating systems fundamentals)
cd /tmp
git clone https://github.com/mit-pdos/xv6-public.git
cd xv6-public
make qemu-nox
3.) Qemu should now bootloop (seem to try to boot but then just
repeat). This is what it looks like below before it repeats:
SeaBIOS (version ?-20191223_100556-anatol)
iPXE (http://ipxe.org) 00:03.0 CA00 PCI2.10 PnP PMM+1FF92A50+1FEF2A50
CA00
Booting from Hard Disk..
Host: Arch Linux - Kernel version: 5.4.13
Guest: xv6 (https://github.com/mit-pdos/xv6-public)
Suspicion:
When I was using qemu 2.11.1 inside an ubuntu docker container, the
xv6 os booted with no problem. I am thinking that something changed
between Qemu 2.11.1 and Qemu 4.2.0 which is now causing boot problems.
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1860742/+subscriptions
^ permalink raw reply [flat|nested] 7+ messages in thread* [Bug 1860742] Re: xv6 Bootloop
2020-01-24 4:03 [Bug 1860742] [NEW] xv6 Bootloop Logan Bateman
2020-01-24 4:12 ` [Bug 1860742] " Logan Bateman
@ 2020-02-18 17:40 ` Mohammadreza Ghofrani
2020-05-11 8:37 ` Manavjeet Singh
` (3 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Mohammadreza Ghofrani @ 2020-02-18 17:40 UTC (permalink / raw)
To: qemu-devel
Also in my ubuntu 19.10 system.
** Also affects: ubuntu
Importance: Undecided
Status: New
** No longer affects: ubuntu
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1860742
Title:
xv6 Bootloop
Status in QEMU:
New
Bug description:
Qemu Version: 4.2.0
Launch command:
qemu-system-x86_64 -nographic -drive file=fs.img,index=1,media=disk,format=raw -drive file=xv6.img,index=0,media=disk,format=raw -smp 2 -m 512
How to reproduce?
1.) Use/install latest release of qemu (4.2.0 at time of writing)
2.) Download, build, and run xv6 (a simple os designed for learning
operating systems fundamentals)
cd /tmp
git clone https://github.com/mit-pdos/xv6-public.git
cd xv6-public
make qemu-nox
3.) Qemu should now bootloop (seem to try to boot but then just
repeat). This is what it looks like below before it repeats:
SeaBIOS (version ?-20191223_100556-anatol)
iPXE (http://ipxe.org) 00:03.0 CA00 PCI2.10 PnP PMM+1FF92A50+1FEF2A50
CA00
Booting from Hard Disk..
Host: Arch Linux - Kernel version: 5.4.13
Guest: xv6 (https://github.com/mit-pdos/xv6-public)
Suspicion:
When I was using qemu 2.11.1 inside an ubuntu docker container, the
xv6 os booted with no problem. I am thinking that something changed
between Qemu 2.11.1 and Qemu 4.2.0 which is now causing boot problems.
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1860742/+subscriptions
^ permalink raw reply [flat|nested] 7+ messages in thread* [Bug 1860742] Re: xv6 Bootloop
2020-01-24 4:03 [Bug 1860742] [NEW] xv6 Bootloop Logan Bateman
2020-01-24 4:12 ` [Bug 1860742] " Logan Bateman
2020-02-18 17:40 ` Mohammadreza Ghofrani
@ 2020-05-11 8:37 ` Manavjeet Singh
2021-05-02 18:25 ` Thomas Huth
` (2 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Manavjeet Singh @ 2020-05-11 8:37 UTC (permalink / raw)
To: qemu-devel
** Also affects: qemu (Ubuntu)
Importance: Undecided
Status: New
** No longer affects: qemu (Ubuntu)
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1860742
Title:
xv6 Bootloop
Status in QEMU:
New
Bug description:
Qemu Version: 4.2.0
Launch command:
qemu-system-x86_64 -nographic -drive file=fs.img,index=1,media=disk,format=raw -drive file=xv6.img,index=0,media=disk,format=raw -smp 2 -m 512
How to reproduce?
1.) Use/install latest release of qemu (4.2.0 at time of writing)
2.) Download, build, and run xv6 (a simple os designed for learning
operating systems fundamentals)
cd /tmp
git clone https://github.com/mit-pdos/xv6-public.git
cd xv6-public
make qemu-nox
3.) Qemu should now bootloop (seem to try to boot but then just
repeat). This is what it looks like below before it repeats:
SeaBIOS (version ?-20191223_100556-anatol)
iPXE (http://ipxe.org) 00:03.0 CA00 PCI2.10 PnP PMM+1FF92A50+1FEF2A50
CA00
Booting from Hard Disk..
Host: Arch Linux - Kernel version: 5.4.13
Guest: xv6 (https://github.com/mit-pdos/xv6-public)
Suspicion:
When I was using qemu 2.11.1 inside an ubuntu docker container, the
xv6 os booted with no problem. I am thinking that something changed
between Qemu 2.11.1 and Qemu 4.2.0 which is now causing boot problems.
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1860742/+subscriptions
^ permalink raw reply [flat|nested] 7+ messages in thread* [Bug 1860742] Re: xv6 Bootloop
2020-01-24 4:03 [Bug 1860742] [NEW] xv6 Bootloop Logan Bateman
` (2 preceding siblings ...)
2020-05-11 8:37 ` Manavjeet Singh
@ 2021-05-02 18:25 ` Thomas Huth
2021-05-03 20:50 ` Logan Bateman
2021-05-06 8:59 ` Thomas Huth
5 siblings, 0 replies; 7+ messages in thread
From: Thomas Huth @ 2021-05-02 18:25 UTC (permalink / raw)
To: qemu-devel
The QEMU project is currently considering to move its bug tracking to
another system. For this we need to know which bugs are still valid
and which could be closed already. Thus we are setting older bugs to
"Incomplete" now.
If you still think this bug report here is valid, then please switch
the state back to "New" within the next 60 days, otherwise this report
will be marked as "Expired". Or please mark it as "Fix Released" if
the problem has been solved with a newer version of QEMU already.
Thank you and sorry for the inconvenience.
** Changed in: qemu
Status: New => Incomplete
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1860742
Title:
xv6 Bootloop
Status in QEMU:
Incomplete
Bug description:
Qemu Version: 4.2.0
Launch command:
qemu-system-x86_64 -nographic -drive file=fs.img,index=1,media=disk,format=raw -drive file=xv6.img,index=0,media=disk,format=raw -smp 2 -m 512
How to reproduce?
1.) Use/install latest release of qemu (4.2.0 at time of writing)
2.) Download, build, and run xv6 (a simple os designed for learning
operating systems fundamentals)
cd /tmp
git clone https://github.com/mit-pdos/xv6-public.git
cd xv6-public
make qemu-nox
3.) Qemu should now bootloop (seem to try to boot but then just
repeat). This is what it looks like below before it repeats:
SeaBIOS (version ?-20191223_100556-anatol)
iPXE (http://ipxe.org) 00:03.0 CA00 PCI2.10 PnP PMM+1FF92A50+1FEF2A50
CA00
Booting from Hard Disk..
Host: Arch Linux - Kernel version: 5.4.13
Guest: xv6 (https://github.com/mit-pdos/xv6-public)
Suspicion:
When I was using qemu 2.11.1 inside an ubuntu docker container, the
xv6 os booted with no problem. I am thinking that something changed
between Qemu 2.11.1 and Qemu 4.2.0 which is now causing boot problems.
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1860742/+subscriptions
^ permalink raw reply [flat|nested] 7+ messages in thread* [Bug 1860742] Re: xv6 Bootloop
2020-01-24 4:03 [Bug 1860742] [NEW] xv6 Bootloop Logan Bateman
` (3 preceding siblings ...)
2021-05-02 18:25 ` Thomas Huth
@ 2021-05-03 20:50 ` Logan Bateman
2021-05-06 8:59 ` Thomas Huth
5 siblings, 0 replies; 7+ messages in thread
From: Logan Bateman @ 2021-05-03 20:50 UTC (permalink / raw)
To: qemu-devel
Still seems to be an issue for me.
Qemu Version 5.2.0
Arch Linux 5.11.16-arch1-1
** Changed in: qemu
Status: Incomplete => New
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1860742
Title:
xv6 Bootloop
Status in QEMU:
New
Bug description:
Qemu Version: 4.2.0
Launch command:
qemu-system-x86_64 -nographic -drive file=fs.img,index=1,media=disk,format=raw -drive file=xv6.img,index=0,media=disk,format=raw -smp 2 -m 512
How to reproduce?
1.) Use/install latest release of qemu (4.2.0 at time of writing)
2.) Download, build, and run xv6 (a simple os designed for learning
operating systems fundamentals)
cd /tmp
git clone https://github.com/mit-pdos/xv6-public.git
cd xv6-public
make qemu-nox
3.) Qemu should now bootloop (seem to try to boot but then just
repeat). This is what it looks like below before it repeats:
SeaBIOS (version ?-20191223_100556-anatol)
iPXE (http://ipxe.org) 00:03.0 CA00 PCI2.10 PnP PMM+1FF92A50+1FEF2A50
CA00
Booting from Hard Disk..
Host: Arch Linux - Kernel version: 5.4.13
Guest: xv6 (https://github.com/mit-pdos/xv6-public)
Suspicion:
When I was using qemu 2.11.1 inside an ubuntu docker container, the
xv6 os booted with no problem. I am thinking that something changed
between Qemu 2.11.1 and Qemu 4.2.0 which is now causing boot problems.
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1860742/+subscriptions
^ permalink raw reply [flat|nested] 7+ messages in thread* [Bug 1860742] Re: xv6 Bootloop
2020-01-24 4:03 [Bug 1860742] [NEW] xv6 Bootloop Logan Bateman
` (4 preceding siblings ...)
2021-05-03 20:50 ` Logan Bateman
@ 2021-05-06 8:59 ` Thomas Huth
5 siblings, 0 replies; 7+ messages in thread
From: Thomas Huth @ 2021-05-06 8:59 UTC (permalink / raw)
To: qemu-devel
This is an automated cleanup. This bug report has been moved to QEMU's
new bug tracker on gitlab.com and thus gets marked as 'expired' now.
Please continue with the discussion here:
https://gitlab.com/qemu-project/qemu/-/issues/192
** Changed in: qemu
Status: New => Expired
** Bug watch added: gitlab.com/qemu-project/qemu/-/issues #192
https://gitlab.com/qemu-project/qemu/-/issues/192
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1860742
Title:
xv6 Bootloop
Status in QEMU:
Expired
Bug description:
Qemu Version: 4.2.0
Launch command:
qemu-system-x86_64 -nographic -drive file=fs.img,index=1,media=disk,format=raw -drive file=xv6.img,index=0,media=disk,format=raw -smp 2 -m 512
How to reproduce?
1.) Use/install latest release of qemu (4.2.0 at time of writing)
2.) Download, build, and run xv6 (a simple os designed for learning
operating systems fundamentals)
cd /tmp
git clone https://github.com/mit-pdos/xv6-public.git
cd xv6-public
make qemu-nox
3.) Qemu should now bootloop (seem to try to boot but then just
repeat). This is what it looks like below before it repeats:
SeaBIOS (version ?-20191223_100556-anatol)
iPXE (http://ipxe.org) 00:03.0 CA00 PCI2.10 PnP PMM+1FF92A50+1FEF2A50
CA00
Booting from Hard Disk..
Host: Arch Linux - Kernel version: 5.4.13
Guest: xv6 (https://github.com/mit-pdos/xv6-public)
Suspicion:
When I was using qemu 2.11.1 inside an ubuntu docker container, the
xv6 os booted with no problem. I am thinking that something changed
between Qemu 2.11.1 and Qemu 4.2.0 which is now causing boot problems.
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1860742/+subscriptions
^ permalink raw reply [flat|nested] 7+ messages in thread