[PATCH v7 0/8] Couple improvements for Tegra clk driver

[PATCH v7 0/8] Couple improvements for Tegra clk driver

[Dmitry Osipenko]

This series fixes couple minor standalone problems of the Tegra clk
driver and adds new features.

Changelog:

v7: - Added r-b from Rob Herring to the schema patch which he gave to v6.

    - Dropped the MAINTAINERS-update patch. Previously Peter said on IRC
      that he doesn't have time on the tegra-clk driver anymore and approved
      the patch, but then he refused to ack the v6 patch, saying that he
      is not reading mailing lists. So I don't feel comfortable with that
      patch. Peter could send it by himself if will be necessary.

    - Added these new patches:

        clk: tegra: cclk: Handle thermal DIV2 CPU frequency throttling
        clk: tegra: Mark external clocks as not having reset control

      I sent out the new Tegra30 thermal sensor driver and now CPU clock
      could be throttled by the sensor hardware [1]. The first patch adds
      support for reporting of the throttled frequency properly.

      [1] https://patchwork.ozlabs.org/project/linux-tegra/list/?series=243126

      During of debugging sound issues of Asus Transformer devices, I noticed
      that the external clocks are missing the no-reset flag. The second
      patch fixes it.

v6: - Made a small improvement and corrected a typo in patch
      "Fix refcounting of gate clocks" that were spotted by
      Michał Mirosław.

v5: - Corrected example in the schema binding to silence dt_binding_check
      warning.

    - The Tegra124 binding is factored out into standalone binding since
      Tegra124 has properties that aren't used by other SoCs and I couldn't
      figure out how to make them conditional in schema.

v4: - Added new patch that converts DT bindings to schema.

v3: - Added acks from Thierry Reding that he gave to v2.

    - Added new patch "clk: tegra: Don't allow zero clock rate for PLLs".

v2: - Added these new patches:

      clk: tegra: Halve SCLK rate on Tegra20
      MAINTAINERS: Hand Tegra clk driver to Jon and Thierry

v1: - Collected clk patches into a single series.

Dmitry Osipenko (8):
  clk: tegra30: Use 300MHz for video decoder by default
  clk: tegra: Fix refcounting of gate clocks
  clk: tegra: Ensure that PLLU configuration is applied properly
  clk: tegra: Halve SCLK rate on Tegra20
  clk: tegra: Don't allow zero clock rate for PLLs
  clk: tegra: cclk: Handle thermal DIV2 CPU frequency throttling
  clk: tegra: Mark external clocks as not having reset control
  dt-bindings: clock: tegra: Convert to schema

 .../bindings/clock/nvidia,tegra114-car.txt    |  63 ----------
 .../bindings/clock/nvidia,tegra124-car.txt    | 107 ----------------
 .../bindings/clock/nvidia,tegra124-car.yaml   | 115 ++++++++++++++++++
 .../bindings/clock/nvidia,tegra20-car.txt     |  63 ----------
 .../bindings/clock/nvidia,tegra20-car.yaml    |  69 +++++++++++
 .../bindings/clock/nvidia,tegra210-car.txt    |  56 ---------
 .../bindings/clock/nvidia,tegra30-car.txt     |  63 ----------
 drivers/clk/tegra/clk-periph-gate.c           |  72 +++++++----
 drivers/clk/tegra/clk-periph.c                |  11 ++
 drivers/clk/tegra/clk-pll.c                   |  12 +-
 drivers/clk/tegra/clk-tegra-periph.c          |   6 +-
 drivers/clk/tegra/clk-tegra-super-cclk.c      |  16 ++-
 drivers/clk/tegra/clk-tegra20.c               |   6 +-
 drivers/clk/tegra/clk-tegra30.c               |   4 +-
 14 files changed, 271 insertions(+), 392 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt
 delete mode 100644 Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt
 create mode 100644 Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml
 delete mode 100644 Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt
 create mode 100644 Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml
 delete mode 100644 Documentation/devicetree/bindings/clock/nvidia,tegra210-car.txt
 delete mode 100644 Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt

-- 
2.30.2

[PATCH v7 1/8] clk: tegra30: Use 300MHz for video decoder by default

[Dmitry Osipenko]

The 600MHz is a too high clock rate for some SoC versions for the video
decoder hardware and this may cause stability issues. Use 300MHz for the
video decoder by default, which is supported by all hardware versions.

Fixes: ed1a2459e20c ("clk: tegra: Add Tegra20/30 EMC clock implementation")
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/clk/tegra/clk-tegra30.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-tegra30.c
index 16dbf83d2f62..a33688b2359e 100644
--- a/drivers/clk/tegra/clk-tegra30.c
+++ b/drivers/clk/tegra/clk-tegra30.c
@@ -1245,7 +1245,7 @@ static struct tegra_clk_init_table init_table[] __initdata = {
 	{ TEGRA30_CLK_GR3D, TEGRA30_CLK_PLL_C, 300000000, 0 },
 	{ TEGRA30_CLK_GR3D2, TEGRA30_CLK_PLL_C, 300000000, 0 },
 	{ TEGRA30_CLK_PLL_U, TEGRA30_CLK_CLK_MAX, 480000000, 0 },
-	{ TEGRA30_CLK_VDE, TEGRA30_CLK_PLL_C, 600000000, 0 },
+	{ TEGRA30_CLK_VDE, TEGRA30_CLK_PLL_C, 300000000, 0 },
 	{ TEGRA30_CLK_SPDIF_IN_SYNC, TEGRA30_CLK_CLK_MAX, 24000000, 0 },
 	{ TEGRA30_CLK_I2S0_SYNC, TEGRA30_CLK_CLK_MAX, 24000000, 0 },
 	{ TEGRA30_CLK_I2S1_SYNC, TEGRA30_CLK_CLK_MAX, 24000000, 0 },
-- 
2.30.2

[PATCH v7 2/8] clk: tegra: Fix refcounting of gate clocks

[Dmitry Osipenko]

The refcounting of the gate clocks has a bug causing the enable_refcnt
to underflow when unused clocks are disabled. This happens because clk
provider erroneously bumps the refcount if clock is enabled at a boot
time, which it shouldn't be doing, and it does this only for the gate
clocks, while peripheral clocks are using the same gate ops and the
peripheral clocks are missing the initial bump. Hence the refcount of
the peripheral clocks is 0 when unused clocks are disabled and then the
counter is decremented further by the gate ops, causing the integer
underflow.

Fix this problem by removing the erroneous bump and by implementing the
disable_unused() callback, which disables the unused gates properly.

The visible effect of the bug is such that the unused clocks are never
gated if a loaded kernel module grabs the unused clocks and starts to use
them. In practice this shouldn't cause any real problems for the drivers
and boards supported by the kernel today.

Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/clk/tegra/clk-periph-gate.c | 72 +++++++++++++++++++----------
 drivers/clk/tegra/clk-periph.c      | 11 +++++
 2 files changed, 58 insertions(+), 25 deletions(-)

diff --git a/drivers/clk/tegra/clk-periph-gate.c b/drivers/clk/tegra/clk-periph-gate.c
index 4b31beefc9fc..dc3f92678407 100644
--- a/drivers/clk/tegra/clk-periph-gate.c
+++ b/drivers/clk/tegra/clk-periph-gate.c
@@ -48,18 +48,9 @@ static int clk_periph_is_enabled(struct clk_hw *hw)
 	return state;
 }
 
-static int clk_periph_enable(struct clk_hw *hw)
+static void clk_periph_enable_locked(struct clk_hw *hw)
 {
 	struct tegra_clk_periph_gate *gate = to_clk_periph_gate(hw);
-	unsigned long flags = 0;
-
-	spin_lock_irqsave(&periph_ref_lock, flags);
-
-	gate->enable_refcnt[gate->clk_num]++;
-	if (gate->enable_refcnt[gate->clk_num] > 1) {
-		spin_unlock_irqrestore(&periph_ref_lock, flags);
-		return 0;
-	}
 
 	write_enb_set(periph_clk_to_bit(gate), gate);
 	udelay(2);
@@ -78,6 +69,32 @@ static int clk_periph_enable(struct clk_hw *hw)
 		udelay(1);
 		writel_relaxed(0, gate->clk_base + LVL2_CLK_GATE_OVRE);
 	}
+}
+
+static void clk_periph_disable_locked(struct clk_hw *hw)
+{
+	struct tegra_clk_periph_gate *gate = to_clk_periph_gate(hw);
+
+	/*
+	 * If peripheral is in the APB bus then read the APB bus to
+	 * flush the write operation in apb bus. This will avoid the
+	 * peripheral access after disabling clock
+	 */
+	if (gate->flags & TEGRA_PERIPH_ON_APB)
+		tegra_read_chipid();
+
+	write_enb_clr(periph_clk_to_bit(gate), gate);
+}
+
+static int clk_periph_enable(struct clk_hw *hw)
+{
+	struct tegra_clk_periph_gate *gate = to_clk_periph_gate(hw);
+	unsigned long flags = 0;
+
+	spin_lock_irqsave(&periph_ref_lock, flags);
+
+	if (!gate->enable_refcnt[gate->clk_num]++)
+		clk_periph_enable_locked(hw);
 
 	spin_unlock_irqrestore(&periph_ref_lock, flags);
 
@@ -91,21 +108,28 @@ static void clk_periph_disable(struct clk_hw *hw)
 
 	spin_lock_irqsave(&periph_ref_lock, flags);
 
-	gate->enable_refcnt[gate->clk_num]--;
-	if (gate->enable_refcnt[gate->clk_num] > 0) {
-		spin_unlock_irqrestore(&periph_ref_lock, flags);
-		return;
-	}
+	WARN_ON(!gate->enable_refcnt[gate->clk_num]);
+
+	if (--gate->enable_refcnt[gate->clk_num] == 0)
+		clk_periph_disable_locked(hw);
+
+	spin_unlock_irqrestore(&periph_ref_lock, flags);
+}
+
+static void clk_periph_disable_unused(struct clk_hw *hw)
+{
+	struct tegra_clk_periph_gate *gate = to_clk_periph_gate(hw);
+	unsigned long flags = 0;
+
+	spin_lock_irqsave(&periph_ref_lock, flags);
 
 	/*
-	 * If peripheral is in the APB bus then read the APB bus to
-	 * flush the write operation in apb bus. This will avoid the
-	 * peripheral access after disabling clock
+	 * Some clocks are duplicated and some of them are marked as critical,
+	 * like fuse and fuse_burn for example, thus the enable_refcnt will
+	 * be non-zero here if the "unused" duplicate is disabled by CCF.
 	 */
-	if (gate->flags & TEGRA_PERIPH_ON_APB)
-		tegra_read_chipid();
-
-	write_enb_clr(periph_clk_to_bit(gate), gate);
+	if (!gate->enable_refcnt[gate->clk_num])
+		clk_periph_disable_locked(hw);
 
 	spin_unlock_irqrestore(&periph_ref_lock, flags);
 }
@@ -114,6 +138,7 @@ const struct clk_ops tegra_clk_periph_gate_ops = {
 	.is_enabled = clk_periph_is_enabled,
 	.enable = clk_periph_enable,
 	.disable = clk_periph_disable,
+	.disable_unused = clk_periph_disable_unused,
 };
 
 struct clk *tegra_clk_register_periph_gate(const char *name,
@@ -148,9 +173,6 @@ struct clk *tegra_clk_register_periph_gate(const char *name,
 	gate->enable_refcnt = enable_refcnt;
 	gate->regs = pregs;
 
-	if (read_enb(gate) & periph_clk_to_bit(gate))
-		enable_refcnt[clk_num]++;
-
 	/* Data in .init is copied by clk_register(), so stack variable OK */
 	gate->hw.init = &init;
 
diff --git a/drivers/clk/tegra/clk-periph.c b/drivers/clk/tegra/clk-periph.c
index 67620c7ecd9e..79ca3aa072b7 100644
--- a/drivers/clk/tegra/clk-periph.c
+++ b/drivers/clk/tegra/clk-periph.c
@@ -100,6 +100,15 @@ static void clk_periph_disable(struct clk_hw *hw)
 	gate_ops->disable(gate_hw);
 }
 
+static void clk_periph_disable_unused(struct clk_hw *hw)
+{
+	struct tegra_clk_periph *periph = to_clk_periph(hw);
+	const struct clk_ops *gate_ops = periph->gate_ops;
+	struct clk_hw *gate_hw = &periph->gate.hw;
+
+	gate_ops->disable_unused(gate_hw);
+}
+
 static void clk_periph_restore_context(struct clk_hw *hw)
 {
 	struct tegra_clk_periph *periph = to_clk_periph(hw);
@@ -126,6 +135,7 @@ const struct clk_ops tegra_clk_periph_ops = {
 	.is_enabled = clk_periph_is_enabled,
 	.enable = clk_periph_enable,
 	.disable = clk_periph_disable,
+	.disable_unused = clk_periph_disable_unused,
 	.restore_context = clk_periph_restore_context,
 };
 
@@ -135,6 +145,7 @@ static const struct clk_ops tegra_clk_periph_nodiv_ops = {
 	.is_enabled = clk_periph_is_enabled,
 	.enable = clk_periph_enable,
 	.disable = clk_periph_disable,
+	.disable_unused = clk_periph_disable_unused,
 	.restore_context = clk_periph_restore_context,
 };
 
-- 
2.30.2

[PATCH v7 3/8] clk: tegra: Ensure that PLLU configuration is applied properly

[Dmitry Osipenko]

The PLLU (USB) consists of the PLL configuration itself and configuration
of the PLLU outputs. The PLLU programming is inconsistent on T30 vs T114,
where T114 immediately bails out if PLLU is enabled and T30 re-enables
a potentially already enabled PLL (left after bootloader) and then fully
reprograms it, which could be unsafe to do. The correct way should be to
skip enabling of the PLL if it's already enabled and then apply
configuration to the outputs. This patch doesn't fix any known problems,
it's a minor improvement.

Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/clk/tegra/clk-pll.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c
index 0193cebe8c5a..823a567f2adc 100644
--- a/drivers/clk/tegra/clk-pll.c
+++ b/drivers/clk/tegra/clk-pll.c
@@ -1131,7 +1131,8 @@ static int clk_pllu_enable(struct clk_hw *hw)
 	if (pll->lock)
 		spin_lock_irqsave(pll->lock, flags);
 
-	_clk_pll_enable(hw);
+	if (!clk_pll_is_enabled(hw))
+		_clk_pll_enable(hw);
 
 	ret = clk_pll_wait_for_lock(pll);
 	if (ret < 0)
@@ -1748,15 +1749,13 @@ static int clk_pllu_tegra114_enable(struct clk_hw *hw)
 		return -EINVAL;
 	}
 
-	if (clk_pll_is_enabled(hw))
-		return 0;
-
 	input_rate = clk_hw_get_rate(__clk_get_hw(osc));
 
 	if (pll->lock)
 		spin_lock_irqsave(pll->lock, flags);
 
-	_clk_pll_enable(hw);
+	if (!clk_pll_is_enabled(hw))
+		_clk_pll_enable(hw);
 
 	ret = clk_pll_wait_for_lock(pll);
 	if (ret < 0)
-- 
2.30.2

[PATCH v7 4/8] clk: tegra: Halve SCLK rate on Tegra20

[Dmitry Osipenko]

Higher SCLK rates on Tegra20 require high core voltage. The higher
clock rate may have a positive performance effect only for AHB DMA
transfers and AVP CPU, but both aren't used by upstream kernel at all.
Halve SCLK rate on Tegra20 in order to remove the high core voltage
requirement.

Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/clk/tegra/clk-tegra20.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/tegra/clk-tegra20.c b/drivers/clk/tegra/clk-tegra20.c
index 3efc651b42e3..3664593a5ba4 100644
--- a/drivers/clk/tegra/clk-tegra20.c
+++ b/drivers/clk/tegra/clk-tegra20.c
@@ -1021,9 +1021,9 @@ static struct tegra_clk_init_table init_table[] __initdata = {
 	{ TEGRA20_CLK_PLL_P_OUT3, TEGRA20_CLK_CLK_MAX, 72000000, 1 },
 	{ TEGRA20_CLK_PLL_P_OUT4, TEGRA20_CLK_CLK_MAX, 24000000, 1 },
 	{ TEGRA20_CLK_PLL_C, TEGRA20_CLK_CLK_MAX, 600000000, 0 },
-	{ TEGRA20_CLK_PLL_C_OUT1, TEGRA20_CLK_CLK_MAX, 240000000, 0 },
-	{ TEGRA20_CLK_SCLK, TEGRA20_CLK_PLL_C_OUT1, 240000000, 0 },
-	{ TEGRA20_CLK_HCLK, TEGRA20_CLK_CLK_MAX, 240000000, 0 },
+	{ TEGRA20_CLK_PLL_C_OUT1, TEGRA20_CLK_CLK_MAX, 120000000, 0 },
+	{ TEGRA20_CLK_SCLK, TEGRA20_CLK_PLL_C_OUT1, 120000000, 0 },
+	{ TEGRA20_CLK_HCLK, TEGRA20_CLK_CLK_MAX, 120000000, 0 },
 	{ TEGRA20_CLK_PCLK, TEGRA20_CLK_CLK_MAX, 60000000, 0 },
 	{ TEGRA20_CLK_CSITE, TEGRA20_CLK_CLK_MAX, 0, 1 },
 	{ TEGRA20_CLK_CCLK, TEGRA20_CLK_CLK_MAX, 0, 1 },
-- 
2.30.2

[PATCH v7 5/8] clk: tegra: Don't allow zero clock rate for PLLs

[Dmitry Osipenko]

Zero clock rate doesn't make sense for PLLs and tegra-clk driver enters
into infinite loop on trying to calculate PLL parameters for zero rate.
Make code to error out if requested rate is zero.

Originally this trouble was found by Robert Yang while he was trying to
bring up upstream kernel on Samsung Galaxy Tab, which happened due to a
bug in Tegra DRM driver that erroneously sets PLL rate to zero. This
issues came over again recently during of kernel bring up on ASUS TF700T.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/clk/tegra/clk-pll.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c
index 823a567f2adc..eaa079c177c3 100644
--- a/drivers/clk/tegra/clk-pll.c
+++ b/drivers/clk/tegra/clk-pll.c
@@ -558,6 +558,9 @@ static int _calc_rate(struct clk_hw *hw, struct tegra_clk_pll_freq_table *cfg,
 	u32 p_div = 0;
 	int ret;
 
+	if (!rate)
+		return -EINVAL;
+
 	switch (parent_rate) {
 	case 12000000:
 	case 26000000:
-- 
2.30.2

[PATCH v7 6/8] clk: tegra: cclk: Handle thermal DIV2 CPU frequency throttling

[Dmitry Osipenko]

Check whether thermal DIV2 throttle is active in order to report
the CPU frequency properly. This very useful for userspace tools
like cpufreq-info which show actual frequency asserted from hardware.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/clk/tegra/clk-tegra-super-cclk.c | 16 ++++++++++++++--
 drivers/clk/tegra/clk-tegra30.c          |  2 +-
 2 files changed, 15 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/tegra/clk-tegra-super-cclk.c b/drivers/clk/tegra/clk-tegra-super-cclk.c
index a03119c30456..f75822b71d0e 100644
--- a/drivers/clk/tegra/clk-tegra-super-cclk.c
+++ b/drivers/clk/tegra/clk-tegra-super-cclk.c
@@ -25,6 +25,8 @@
 
 #define SUPER_CDIV_ENB		BIT(31)
 
+#define TSENSOR_SLOWDOWN	BIT(23)
+
 static struct tegra_clk_super_mux *cclk_super;
 static bool cclk_on_pllx;
 
@@ -47,10 +49,20 @@ static int cclk_super_set_rate(struct clk_hw *hw, unsigned long rate,
 static unsigned long cclk_super_recalc_rate(struct clk_hw *hw,
 					    unsigned long parent_rate)
 {
+	struct tegra_clk_super_mux *super = to_clk_super_mux(hw);
+	u32 val = readl_relaxed(super->reg);
+	unsigned int div2;
+
+	/* check whether thermal throttling is active */
+	if (val & TSENSOR_SLOWDOWN)
+		div2 = 2;
+	else
+		div2 = 1;
+
 	if (cclk_super_get_parent(hw) == PLLX_INDEX)
-		return parent_rate;
+		return parent_rate / div2;
 
-	return tegra_clk_super_ops.recalc_rate(hw, parent_rate);
+	return tegra_clk_super_ops.recalc_rate(hw, parent_rate) / div2;
 }
 
 static int cclk_super_determine_rate(struct clk_hw *hw,
diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-tegra30.c
index a33688b2359e..5b6bd138be84 100644
--- a/drivers/clk/tegra/clk-tegra30.c
+++ b/drivers/clk/tegra/clk-tegra30.c
@@ -930,7 +930,7 @@ static void __init tegra30_super_clk_init(void)
 	/* CCLKG */
 	clk = tegra_clk_register_super_cclk("cclk_g", cclk_g_parents,
 				  ARRAY_SIZE(cclk_g_parents),
-				  CLK_SET_RATE_PARENT,
+				  CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
 				  clk_base + CCLKG_BURST_POLICY,
 				  0, NULL);
 	clks[TEGRA30_CLK_CCLK_G] = clk;
-- 
2.30.2

Re: [PATCH v7 6/8] clk: tegra: cclk: Handle thermal DIV2 CPU frequency throttling

[Michał Mirosław]

On Tue, May 11, 2021 at 02:17:35AM +0300, Dmitry Osipenko wrote:
> Check whether thermal DIV2 throttle is active in order to report
> the CPU frequency properly. This very useful for userspace tools
> like cpufreq-info which show actual frequency asserted from hardware.
> 
> Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
> ---
>  drivers/clk/tegra/clk-tegra-super-cclk.c | 16 ++++++++++++++--
>  drivers/clk/tegra/clk-tegra30.c          |  2 +-
>  2 files changed, 15 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/clk/tegra/clk-tegra-super-cclk.c b/drivers/clk/tegra/clk-tegra-super-cclk.c
> index a03119c30456..f75822b71d0e 100644
> --- a/drivers/clk/tegra/clk-tegra-super-cclk.c
> +++ b/drivers/clk/tegra/clk-tegra-super-cclk.c
> @@ -25,6 +25,8 @@
>  
>  #define SUPER_CDIV_ENB		BIT(31)
>  
> +#define TSENSOR_SLOWDOWN	BIT(23)
> +
>  static struct tegra_clk_super_mux *cclk_super;
>  static bool cclk_on_pllx;
>  
> @@ -47,10 +49,20 @@ static int cclk_super_set_rate(struct clk_hw *hw, unsigned long rate,
>  static unsigned long cclk_super_recalc_rate(struct clk_hw *hw,
>  					    unsigned long parent_rate)
>  {
> +	struct tegra_clk_super_mux *super = to_clk_super_mux(hw);
> +	u32 val = readl_relaxed(super->reg);
> +	unsigned int div2;
> +
> +	/* check whether thermal throttling is active */
> +	if (val & TSENSOR_SLOWDOWN)
> +		div2 = 2;
> +	else
> +		div2 = 1;
> +
>  	if (cclk_super_get_parent(hw) == PLLX_INDEX)
> -		return parent_rate;
> +		return parent_rate / div2;
>  
> -	return tegra_clk_super_ops.recalc_rate(hw, parent_rate);
> +	return tegra_clk_super_ops.recalc_rate(hw, parent_rate) / div2;
>  }

Could you check if the compiler can optimize out the division? I know this
is a slow path, but nevertheless the 'shr' version would be the same amount
of source code.

Best Regrads
Michał Mirosław

Re: [PATCH v7 6/8] clk: tegra: cclk: Handle thermal DIV2 CPU frequency throttling

[Dmitry Osipenko]

11.05.2021 17:41, Michał Mirosław пишет:
> On Tue, May 11, 2021 at 02:17:35AM +0300, Dmitry Osipenko wrote:
>> Check whether thermal DIV2 throttle is active in order to report
>> the CPU frequency properly. This very useful for userspace tools
>> like cpufreq-info which show actual frequency asserted from hardware.
>>
>> Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
>> ---
>>  drivers/clk/tegra/clk-tegra-super-cclk.c | 16 ++++++++++++++--
>>  drivers/clk/tegra/clk-tegra30.c          |  2 +-
>>  2 files changed, 15 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/clk/tegra/clk-tegra-super-cclk.c b/drivers/clk/tegra/clk-tegra-super-cclk.c
>> index a03119c30456..f75822b71d0e 100644
>> --- a/drivers/clk/tegra/clk-tegra-super-cclk.c
>> +++ b/drivers/clk/tegra/clk-tegra-super-cclk.c
>> @@ -25,6 +25,8 @@
>>  
>>  #define SUPER_CDIV_ENB		BIT(31)
>>  
>> +#define TSENSOR_SLOWDOWN	BIT(23)
>> +
>>  static struct tegra_clk_super_mux *cclk_super;
>>  static bool cclk_on_pllx;
>>  
>> @@ -47,10 +49,20 @@ static int cclk_super_set_rate(struct clk_hw *hw, unsigned long rate,
>>  static unsigned long cclk_super_recalc_rate(struct clk_hw *hw,
>>  					    unsigned long parent_rate)
>>  {
>> +	struct tegra_clk_super_mux *super = to_clk_super_mux(hw);
>> +	u32 val = readl_relaxed(super->reg);
>> +	unsigned int div2;
>> +
>> +	/* check whether thermal throttling is active */
>> +	if (val & TSENSOR_SLOWDOWN)
>> +		div2 = 2;
>> +	else
>> +		div2 = 1;
>> +
>>  	if (cclk_super_get_parent(hw) == PLLX_INDEX)
>> -		return parent_rate;
>> +		return parent_rate / div2;
>>  
>> -	return tegra_clk_super_ops.recalc_rate(hw, parent_rate);
>> +	return tegra_clk_super_ops.recalc_rate(hw, parent_rate) / div2;
>>  }
> 
> Could you check if the compiler can optimize out the division? I know this
> is a slow path, but nevertheless the 'shr' version would be the same amount
> of source code.

Hello Michał,

GCC can't optimize that division. I'll wait for more comments and then
update this patch in v8 with yours suggestion. Thank you for taking a
look at the patches.

[PATCH v7 7/8] clk: tegra: Mark external clocks as not having reset control

[Dmitry Osipenko]

The external clocks don't have reset bits as they don't belong to any
specific hardware unit. Mark them as not having reset control for
consistency.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/clk/tegra/clk-tegra-periph.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/tegra/clk-tegra-periph.c b/drivers/clk/tegra/clk-tegra-periph.c
index 60cc34f90cb9..292d6269daf1 100644
--- a/drivers/clk/tegra/clk-tegra-periph.c
+++ b/drivers/clk/tegra/clk-tegra-periph.c
@@ -712,9 +712,9 @@ static struct tegra_periph_init_data periph_clks[] = {
 	MUX8("ndflash", mux_pllp_pllc2_c_c3_pllm_clkm, CLK_SOURCE_NDFLASH, 13, TEGRA_PERIPH_ON_APB, tegra_clk_ndflash_8),
 	MUX8("ndspeed", mux_pllp_pllc2_c_c3_pllm_clkm, CLK_SOURCE_NDSPEED, 80, TEGRA_PERIPH_ON_APB, tegra_clk_ndspeed_8),
 	MUX8("hdmi", mux_pllp_pllm_plld_plla_pllc_plld2_clkm, CLK_SOURCE_HDMI, 51, 0, tegra_clk_hdmi),
-	MUX8("extern1", mux_plla_clk32_pllp_clkm_plle, CLK_SOURCE_EXTERN1, 120, 0, tegra_clk_extern1),
-	MUX8("extern2", mux_plla_clk32_pllp_clkm_plle, CLK_SOURCE_EXTERN2, 121, 0, tegra_clk_extern2),
-	MUX8("extern3", mux_plla_clk32_pllp_clkm_plle, CLK_SOURCE_EXTERN3, 122, 0, tegra_clk_extern3),
+	MUX8("extern1", mux_plla_clk32_pllp_clkm_plle, CLK_SOURCE_EXTERN1, 120, TEGRA_PERIPH_NO_RESET, tegra_clk_extern1),
+	MUX8("extern2", mux_plla_clk32_pllp_clkm_plle, CLK_SOURCE_EXTERN2, 121, TEGRA_PERIPH_NO_RESET, tegra_clk_extern2),
+	MUX8("extern3", mux_plla_clk32_pllp_clkm_plle, CLK_SOURCE_EXTERN3, 122, TEGRA_PERIPH_NO_RESET, tegra_clk_extern3),
 	MUX8("soc_therm", mux_pllm_pllc_pllp_plla, CLK_SOURCE_SOC_THERM, 78, TEGRA_PERIPH_ON_APB, tegra_clk_soc_therm),
 	MUX8("soc_therm", mux_clkm_pllc_pllp_plla, CLK_SOURCE_SOC_THERM, 78, TEGRA_PERIPH_ON_APB, tegra_clk_soc_therm_8),
 	MUX8("vi_sensor", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_VI_SENSOR, 164, TEGRA_PERIPH_NO_RESET, tegra_clk_vi_sensor_8),
-- 
2.30.2

[PATCH v7 8/8] dt-bindings: clock: tegra: Convert to schema

[Dmitry Osipenko]

Convert NVIDIA Tegra clock bindings to schema.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 .../bindings/clock/nvidia,tegra114-car.txt    |  63 ----------
 .../bindings/clock/nvidia,tegra124-car.txt    | 107 ----------------
 .../bindings/clock/nvidia,tegra124-car.yaml   | 115 ++++++++++++++++++
 .../bindings/clock/nvidia,tegra20-car.txt     |  63 ----------
 .../bindings/clock/nvidia,tegra20-car.yaml    |  69 +++++++++++
 .../bindings/clock/nvidia,tegra210-car.txt    |  56 ---------
 .../bindings/clock/nvidia,tegra30-car.txt     |  63 ----------
 7 files changed, 184 insertions(+), 352 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt
 delete mode 100644 Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt
 create mode 100644 Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml
 delete mode 100644 Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt
 create mode 100644 Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml
 delete mode 100644 Documentation/devicetree/bindings/clock/nvidia,tegra210-car.txt
 delete mode 100644 Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt

diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt
deleted file mode 100644
index 9acea9d93160..000000000000
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-NVIDIA Tegra114 Clock And Reset Controller
-
-This binding uses the common clock binding:
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
-for muxing and gating Tegra's clocks, and setting their rates.
-
-Required properties :
-- compatible : Should be "nvidia,tegra114-car"
-- reg : Should contain CAR registers location and length
-- clocks : Should contain phandle and clock specifiers for two clocks:
-  the 32 KHz "32k_in", and the board-specific oscillator "osc".
-- #clock-cells : Should be 1.
-  In clock consumers, this cell represents the clock ID exposed by the
-  CAR. The assignments may be found in header file
-  <dt-bindings/clock/tegra114-car.h>.
-- #reset-cells : Should be 1.
-  In clock consumers, this cell represents the bit number in the CAR's
-  array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
-
-Example SoC include file:
-
-/ {
-	tegra_car: clock {
-		compatible = "nvidia,tegra114-car";
-		reg = <0x60006000 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	usb@c5004000 {
-		clocks = <&tegra_car TEGRA114_CLK_USB2>;
-	};
-};
-
-Example board file:
-
-/ {
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		osc: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <12000000>;
-		};
-
-		clk_32k: clock@1 {
-			compatible = "fixed-clock";
-			reg = <1>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	&tegra_car {
-		clocks = <&clk_32k> <&osc>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt
deleted file mode 100644
index 7f02fb4ca4ad..000000000000
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt
+++ /dev/null
@@ -1,107 +0,0 @@
-NVIDIA Tegra124 and Tegra132 Clock And Reset Controller
-
-This binding uses the common clock binding:
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
-for muxing and gating Tegra's clocks, and setting their rates.
-
-Required properties :
-- compatible : Should be "nvidia,tegra124-car" or "nvidia,tegra132-car"
-- reg : Should contain CAR registers location and length
-- clocks : Should contain phandle and clock specifiers for two clocks:
-  the 32 KHz "32k_in", and the board-specific oscillator "osc".
-- #clock-cells : Should be 1.
-  In clock consumers, this cell represents the clock ID exposed by the
-  CAR. The assignments may be found in the header files
-  <dt-bindings/clock/tegra124-car-common.h> (which covers IDs common
-  to Tegra124 and Tegra132) and <dt-bindings/clock/tegra124-car.h>
-  (for Tegra124-specific clocks).
-- #reset-cells : Should be 1.
-  In clock consumers, this cell represents the bit number in the CAR's
-  array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
-- nvidia,external-memory-controller : phandle of the EMC driver.
-
-The node should contain a "emc-timings" subnode for each supported RAM type (see
-field RAM_CODE in register PMC_STRAPPING_OPT_A).
-
-Required properties for "emc-timings" nodes :
-- nvidia,ram-code : Should contain the value of RAM_CODE this timing set
-  is used for.
-
-Each "emc-timings" node should contain a "timing" subnode for every supported
-EMC clock rate.
-
-Required properties for "timing" nodes :
-- clock-frequency : Should contain the memory clock rate to which this timing
-relates.
-- nvidia,parent-clock-frequency : Should contain the rate at which the current
-parent of the EMC clock should be running at this timing.
-- clocks : Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names : Must include the following entries:
-  - emc-parent : the clock that should be the parent of the EMC clock at this
-timing.
-
-Example SoC include file:
-
-/ {
-	tegra_car: clock@60006000 {
-		compatible = "nvidia,tegra124-car";
-		reg = <0x60006000 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-		nvidia,external-memory-controller = <&emc>;
-	};
-
-	usb@c5004000 {
-		clocks = <&tegra_car TEGRA124_CLK_USB2>;
-	};
-};
-
-Example board file:
-
-/ {
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		osc: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <112400000>;
-		};
-
-		clk_32k: clock@1 {
-			compatible = "fixed-clock";
-			reg = <1>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	&tegra_car {
-		clocks = <&clk_32k> <&osc>;
-	};
-
-	clock@60006000 {
-		emc-timings-3 {
-			nvidia,ram-code = <3>;
-
-			timing-12750000 {
-				clock-frequency = <12750000>;
-				nvidia,parent-clock-frequency = <408000000>;
-				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
-				clock-names = "emc-parent";
-			};
-			timing-20400000 {
-				clock-frequency = <20400000>;
-				nvidia,parent-clock-frequency = <408000000>;
-				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
-				clock-names = "emc-parent";
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml
new file mode 100644
index 000000000000..ec7ab1483652
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/nvidia,tegra124-car.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Clock and Reset Controller
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+description: |
+  The Clock and Reset (CAR) is the HW module responsible for muxing and gating
+  Tegra's clocks, and setting their rates. It comprises CLKGEN and RSTGEN units.
+
+  CLKGEN provides the registers to program the PLLs. It controls most of
+  the clock source programming and most of the clock dividers.
+
+  CLKGEN input signals include the external clock for the reference frequency
+  (12 MHz, 26 MHz) and the external clock for the Real Time Clock (32.768 KHz).
+
+  Outputs from CLKGEN are inputs clock of the h/w blocks in the Tegra system.
+
+  RSTGEN provides the registers needed to control resetting of each block in
+  the Tegra system.
+
+properties:
+  compatible:
+    const: nvidia,tegra124-car
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  nvidia,external-memory-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle of the external memory controller node
+
+patternProperties:
+  "^emc-timings-[0-9]+$":
+    type: object
+    properties:
+      nvidia,ram-code:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          value of the RAM_CODE field in the PMC_STRAPPING_OPT_A register that
+          this timing set is used for
+
+    patternProperties:
+      "^timing-[0-9]+$":
+        type: object
+        properties:
+          clock-frequency:
+            description:
+              external memory clock rate in Hz
+            minimum: 1000000
+            maximum: 1000000000
+
+          nvidia,parent-clock-frequency:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              rate of parent clock in Hz
+            minimum: 1000000
+            maximum: 1000000000
+
+          clocks:
+            items:
+              - description: parent clock of EMC
+
+          clock-names:
+            items:
+              - const: emc-parent
+
+        required:
+          - clock-frequency
+          - nvidia,parent-clock-frequency
+          - clocks
+          - clock-names
+
+        additionalProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra124-car.h>
+
+    car: clock-controller@60006000 {
+        compatible = "nvidia,tegra124-car";
+        reg = <0x60006000 0x1000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
+
+    usb-controller@c5004000 {
+        compatible = "nvidia,tegra20-ehci";
+        reg = <0xc5004000 0x4000>;
+        clocks = <&car TEGRA124_CLK_USB2>;
+        resets = <&car TEGRA124_CLK_USB2>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt
deleted file mode 100644
index 6c5901b503d0..000000000000
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-NVIDIA Tegra20 Clock And Reset Controller
-
-This binding uses the common clock binding:
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
-for muxing and gating Tegra's clocks, and setting their rates.
-
-Required properties :
-- compatible : Should be "nvidia,tegra20-car"
-- reg : Should contain CAR registers location and length
-- clocks : Should contain phandle and clock specifiers for two clocks:
-  the 32 KHz "32k_in", and the board-specific oscillator "osc".
-- #clock-cells : Should be 1.
-  In clock consumers, this cell represents the clock ID exposed by the
-  CAR. The assignments may be found in header file
-  <dt-bindings/clock/tegra20-car.h>.
-- #reset-cells : Should be 1.
-  In clock consumers, this cell represents the bit number in the CAR's
-  array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
-
-Example SoC include file:
-
-/ {
-	tegra_car: clock {
-		compatible = "nvidia,tegra20-car";
-		reg = <0x60006000 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	usb@c5004000 {
-		clocks = <&tegra_car TEGRA20_CLK_USB2>;
-	};
-};
-
-Example board file:
-
-/ {
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		osc: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <12000000>;
-		};
-
-		clk_32k: clock@1 {
-			compatible = "fixed-clock";
-			reg = <1>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	&tegra_car {
-		clocks = <&clk_32k> <&osc>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml
new file mode 100644
index 000000000000..459d2a525393
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/nvidia,tegra20-car.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Clock and Reset Controller
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+description: |
+  The Clock and Reset (CAR) is the HW module responsible for muxing and gating
+  Tegra's clocks, and setting their rates. It comprises CLKGEN and RSTGEN units.
+
+  CLKGEN provides the registers to program the PLLs. It controls most of
+  the clock source programming and most of the clock dividers.
+
+  CLKGEN input signals include the external clock for the reference frequency
+  (12 MHz, 26 MHz) and the external clock for the Real Time Clock (32.768 KHz).
+
+  Outputs from CLKGEN are inputs clock of the h/w blocks in the Tegra system.
+
+  RSTGEN provides the registers needed to control resetting of each block in
+  the Tegra system.
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra20-car
+      - nvidia,tegra30-car
+      - nvidia,tegra114-car
+      - nvidia,tegra210-car
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+
+    car: clock-controller@60006000 {
+        compatible = "nvidia,tegra20-car";
+        reg = <0x60006000 0x1000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
+
+    usb-controller@c5004000 {
+        compatible = "nvidia,tegra20-ehci";
+        reg = <0xc5004000 0x4000>;
+        clocks = <&car TEGRA20_CLK_USB2>;
+        resets = <&car TEGRA20_CLK_USB2>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra210-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra210-car.txt
deleted file mode 100644
index 26f237f641b7..000000000000
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra210-car.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-NVIDIA Tegra210 Clock And Reset Controller
-
-This binding uses the common clock binding:
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
-for muxing and gating Tegra's clocks, and setting their rates.
-
-Required properties :
-- compatible : Should be "nvidia,tegra210-car"
-- reg : Should contain CAR registers location and length
-- clocks : Should contain phandle and clock specifiers for two clocks:
-  the 32 KHz "32k_in".
-- #clock-cells : Should be 1.
-  In clock consumers, this cell represents the clock ID exposed by the
-  CAR. The assignments may be found in header file
-  <dt-bindings/clock/tegra210-car.h>.
-- #reset-cells : Should be 1.
-  In clock consumers, this cell represents the bit number in the CAR's
-  array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
-
-Example SoC include file:
-
-/ {
-	tegra_car: clock {
-		compatible = "nvidia,tegra210-car";
-		reg = <0x60006000 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	usb@c5004000 {
-		clocks = <&tegra_car TEGRA210_CLK_USB2>;
-	};
-};
-
-Example board file:
-
-/ {
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk_32k: clock@1 {
-			compatible = "fixed-clock";
-			reg = <1>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	&tegra_car {
-		clocks = <&clk_32k>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt
deleted file mode 100644
index 63618cde12df..000000000000
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-NVIDIA Tegra30 Clock And Reset Controller
-
-This binding uses the common clock binding:
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
-for muxing and gating Tegra's clocks, and setting their rates.
-
-Required properties :
-- compatible : Should be "nvidia,tegra30-car"
-- reg : Should contain CAR registers location and length
-- clocks : Should contain phandle and clock specifiers for two clocks:
-  the 32 KHz "32k_in", and the board-specific oscillator "osc".
-- #clock-cells : Should be 1.
-  In clock consumers, this cell represents the clock ID exposed by the
-  CAR. The assignments may be found in header file
-  <dt-bindings/clock/tegra30-car.h>.
-- #reset-cells : Should be 1.
-  In clock consumers, this cell represents the bit number in the CAR's
-  array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
-
-Example SoC include file:
-
-/ {
-	tegra_car: clock {
-		compatible = "nvidia,tegra30-car";
-		reg = <0x60006000 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	usb@c5004000 {
-		clocks = <&tegra_car TEGRA30_CLK_USB2>;
-	};
-};
-
-Example board file:
-
-/ {
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		osc: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <12000000>;
-		};
-
-		clk_32k: clock@1 {
-			compatible = "fixed-clock";
-			reg = <1>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	&tegra_car {
-		clocks = <&clk_32k> <&osc>;
-	};
-};
-- 
2.30.2

Re: [PATCH v7 8/8] dt-bindings: clock: tegra: Convert to schema

[Rob Herring]

On Tue, 11 May 2021 02:17:37 +0300, Dmitry Osipenko wrote:
> Convert NVIDIA Tegra clock bindings to schema.
> 
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
> ---
>  .../bindings/clock/nvidia,tegra114-car.txt    |  63 ----------
>  .../bindings/clock/nvidia,tegra124-car.txt    | 107 ----------------
>  .../bindings/clock/nvidia,tegra124-car.yaml   | 115 ++++++++++++++++++
>  .../bindings/clock/nvidia,tegra20-car.txt     |  63 ----------
>  .../bindings/clock/nvidia,tegra20-car.yaml    |  69 +++++++++++
>  .../bindings/clock/nvidia,tegra210-car.txt    |  56 ---------
>  .../bindings/clock/nvidia,tegra30-car.txt     |  63 ----------
>  7 files changed, 184 insertions(+), 352 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt
>  delete mode 100644 Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt
>  create mode 100644 Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml
>  delete mode 100644 Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt
>  create mode 100644 Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml
>  delete mode 100644 Documentation/devicetree/bindings/clock/nvidia,tegra210-car.txt
>  delete mode 100644 Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/clock/nvidia,tegra20-car.example.dt.yaml:0:0: /example-0/usb-controller@c5004000: failed to match any schema with compatible: ['nvidia,tegra20-ehci']
Documentation/devicetree/bindings/clock/nvidia,tegra124-car.example.dt.yaml:0:0: /example-0/usb-controller@c5004000: failed to match any schema with compatible: ['nvidia,tegra20-ehci']

See https://patchwork.ozlabs.org/patch/1476773

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.