[PATCH] regulator: pca9450: Convert to use regulator_set_ramp_delay_regmap

[PATCH] regulator: pca9450: Convert to use regulator_set_ramp_delay_regmap

[Axel Lin]

Use regulator_set_ramp_delay_regmap instead of open-coded.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
 drivers/regulator/pca9450-regulator.c | 51 +++++++++++++--------------
 1 file changed, 24 insertions(+), 27 deletions(-)

diff --git a/drivers/regulator/pca9450-regulator.c b/drivers/regulator/pca9450-regulator.c
index 2f7ee212cb8c..64e5f5f0cc84 100644
--- a/drivers/regulator/pca9450-regulator.c
+++ b/drivers/regulator/pca9450-regulator.c
@@ -65,32 +65,9 @@ static const struct regmap_config pca9450_regmap_config = {
  * 10: 25mV/4usec
  * 11: 25mV/8usec
  */
-static int pca9450_dvs_set_ramp_delay(struct regulator_dev *rdev,
-				      int ramp_delay)
-{
-	int id = rdev_get_id(rdev);
-	unsigned int ramp_value;
-
-	switch (ramp_delay) {
-	case 1 ... 3125:
-		ramp_value = BUCK1_RAMP_3P125MV;
-		break;
-	case 3126 ... 6250:
-		ramp_value = BUCK1_RAMP_6P25MV;
-		break;
-	case 6251 ... 12500:
-		ramp_value = BUCK1_RAMP_12P5MV;
-		break;
-	case 12501 ... 25000:
-		ramp_value = BUCK1_RAMP_25MV;
-		break;
-	default:
-		ramp_value = BUCK1_RAMP_25MV;
-	}
-
-	return regmap_update_bits(rdev->regmap, PCA9450_REG_BUCK1CTRL + id * 3,
-				  BUCK1_RAMP_MASK, ramp_value << 6);
-}
+static const unsigned int pca9450_dvs_buck_ramp_table[] = {
+	25000, 12500, 6250, 3125
+};
 
 static const struct regulator_ops pca9450_dvs_buck_regulator_ops = {
 	.enable = regulator_enable_regmap,
@@ -100,7 +77,7 @@ static const struct regulator_ops pca9450_dvs_buck_regulator_ops = {
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
 	.set_voltage_time_sel = regulator_set_voltage_time_sel,
-	.set_ramp_delay = pca9450_dvs_set_ramp_delay,
+	.set_ramp_delay	= regulator_set_ramp_delay_regmap,
 };
 
 static const struct regulator_ops pca9450_buck_regulator_ops = {
@@ -251,6 +228,10 @@ static const struct pca9450_regulator_desc pca9450a_regulators[] = {
 			.vsel_mask = BUCK1OUT_DVS0_MASK,
 			.enable_reg = PCA9450_REG_BUCK1CTRL,
 			.enable_mask = BUCK1_ENMODE_MASK,
+			.ramp_reg = PCA9450_REG_BUCK1CTRL,
+			.ramp_mask = BUCK1_RAMP_MASK,
+			.ramp_delay_table = pca9450_dvs_buck_ramp_table,
+			.n_ramp_values = ARRAY_SIZE(pca9450_dvs_buck_ramp_table),
 			.owner = THIS_MODULE,
 			.of_parse_cb = pca9450_set_dvs_levels,
 		},
@@ -276,6 +257,10 @@ static const struct pca9450_regulator_desc pca9450a_regulators[] = {
 			.vsel_mask = BUCK2OUT_DVS0_MASK,
 			.enable_reg = PCA9450_REG_BUCK2CTRL,
 			.enable_mask = BUCK1_ENMODE_MASK,
+			.ramp_reg = PCA9450_REG_BUCK2CTRL,
+			.ramp_mask = BUCK2_RAMP_MASK,
+			.ramp_delay_table = pca9450_dvs_buck_ramp_table,
+			.n_ramp_values = ARRAY_SIZE(pca9450_dvs_buck_ramp_table),
 			.owner = THIS_MODULE,
 			.of_parse_cb = pca9450_set_dvs_levels,
 		},
@@ -301,6 +286,10 @@ static const struct pca9450_regulator_desc pca9450a_regulators[] = {
 			.vsel_mask = BUCK3OUT_DVS0_MASK,
 			.enable_reg = PCA9450_REG_BUCK3CTRL,
 			.enable_mask = BUCK3_ENMODE_MASK,
+			.ramp_reg = PCA9450_REG_BUCK3CTRL,
+			.ramp_mask = BUCK3_RAMP_MASK,
+			.ramp_delay_table = pca9450_dvs_buck_ramp_table,
+			.n_ramp_values = ARRAY_SIZE(pca9450_dvs_buck_ramp_table),
 			.owner = THIS_MODULE,
 			.of_parse_cb = pca9450_set_dvs_levels,
 		},
@@ -477,6 +466,10 @@ static const struct pca9450_regulator_desc pca9450bc_regulators[] = {
 			.vsel_mask = BUCK1OUT_DVS0_MASK,
 			.enable_reg = PCA9450_REG_BUCK1CTRL,
 			.enable_mask = BUCK1_ENMODE_MASK,
+			.ramp_reg = PCA9450_REG_BUCK1CTRL,
+			.ramp_mask = BUCK1_RAMP_MASK,
+			.ramp_delay_table = pca9450_dvs_buck_ramp_table,
+			.n_ramp_values = ARRAY_SIZE(pca9450_dvs_buck_ramp_table),
 			.owner = THIS_MODULE,
 			.of_parse_cb = pca9450_set_dvs_levels,
 		},
@@ -502,6 +495,10 @@ static const struct pca9450_regulator_desc pca9450bc_regulators[] = {
 			.vsel_mask = BUCK2OUT_DVS0_MASK,
 			.enable_reg = PCA9450_REG_BUCK2CTRL,
 			.enable_mask = BUCK1_ENMODE_MASK,
+			.ramp_reg = PCA9450_REG_BUCK2CTRL,
+			.ramp_mask = BUCK2_RAMP_MASK,
+			.ramp_delay_table = pca9450_dvs_buck_ramp_table,
+			.n_ramp_values = ARRAY_SIZE(pca9450_dvs_buck_ramp_table),
 			.owner = THIS_MODULE,
 			.of_parse_cb = pca9450_set_dvs_levels,
 		},
-- 
2.25.1

Re: [PATCH] regulator: pca9450: Convert to use regulator_set_ramp_delay_regmap

[Mark Brown]

On Wed, 26 May 2021 20:24:08 +0800, Axel Lin wrote:
> Use regulator_set_ramp_delay_regmap instead of open-coded.

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next

Thanks!

[1/1] regulator: pca9450: Convert to use regulator_set_ramp_delay_regmap
      commit: 4c4fce171c4ca08cd98be7db350e6950630b046a

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark