[PATCH 0/7] sdhci-of-arasan driver updates for ZynqMP platform

[PATCH 0/7] sdhci-of-arasan driver updates for ZynqMP platform

[Manish Narani]

This patch series has some bug fixes for sdhci-of-arasan driver with
respect to ZynqMP platform. This series also has some code style changes
in the driver.

Manish Narani (6):
  mmc: sdhci-of-arasan: Modified SD default speed to 19MHz for ZynqMP
  mmc: sdhci-of-arasan: Add "SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12" quirk.
  mmc: sdhci-of-arasan: Skip Auto tuning for DDR50 mode in ZynqMP
    platform
  mmc: host: sdhci-of-arasan: Check return value of non-void funtions
  mmc: host: sdhci-of-arasan: Use appropriate type of division macro
  mmc: host: sdhci-of-arasan: Modify data type of the clk_phase array

Sai Krishna Potthuri (1):
  mmc: arasan: Fix the issue in reading tap values from DT

 drivers/mmc/host/sdhci-of-arasan.c | 51 ++++++++++++++++++++++++++++++++------
 1 file changed, 44 insertions(+), 7 deletions(-)

-- 
2.1.1

[PATCH 0/7] sdhci-of-arasan driver updates for ZynqMP platform

[Manish Narani]

This patch series has some bug fixes for sdhci-of-arasan driver with
respect to ZynqMP platform. This series also has some code style changes
in the driver.

Manish Narani (6):
  mmc: sdhci-of-arasan: Modified SD default speed to 19MHz for ZynqMP
  mmc: sdhci-of-arasan: Add "SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12" quirk.
  mmc: sdhci-of-arasan: Skip Auto tuning for DDR50 mode in ZynqMP
    platform
  mmc: host: sdhci-of-arasan: Check return value of non-void funtions
  mmc: host: sdhci-of-arasan: Use appropriate type of division macro
  mmc: host: sdhci-of-arasan: Modify data type of the clk_phase array

Sai Krishna Potthuri (1):
  mmc: arasan: Fix the issue in reading tap values from DT

 drivers/mmc/host/sdhci-of-arasan.c | 51 ++++++++++++++++++++++++++++++++------
 1 file changed, 44 insertions(+), 7 deletions(-)

-- 
2.1.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 1/7] mmc: sdhci-of-arasan: Modified SD default speed to 19MHz for ZynqMP

[Manish Narani]

SD standard speed timing was met only at 19MHz and not 25 MHz, that's
why changing driver to 19MHz. The reason for this is when a level shifter
is used on the board, timing was met for standard speed only at 19MHz.
Since this level shifter is commonly required for high speed modes,
the driver is modified to use standard speed of 19Mhz.

Signed-off-by: Manish Narani <manish.narani@xilinx.com>
---
 drivers/mmc/host/sdhci-of-arasan.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index 839965f..fc3e41c 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -159,6 +159,12 @@ struct sdhci_arasan_data {
 /* Controller immediately reports SDHCI_CLOCK_INT_STABLE after enabling the
  * internal clock even when the clock isn't stable */
 #define SDHCI_ARASAN_QUIRK_CLOCK_UNSTABLE BIT(1)
+/*
+ * Some of the Arasan variations might not have timing requirements
+ * met at 25MHz for Default Speed mode, those controllers work at
+ * 19MHz instead
+ */
+#define SDHCI_ARASAN_QUIRK_CLOCK_25_BROKEN BIT(2)
 };
 
 struct sdhci_arasan_of_data {
@@ -290,6 +296,16 @@ static void sdhci_arasan_set_clock(struct sdhci_host *host, unsigned int clock)
 		sdhci_arasan->is_phy_on = false;
 	}
 
+	if (sdhci_arasan->quirks & SDHCI_ARASAN_QUIRK_CLOCK_25_BROKEN) {
+		/*
+		 * Some of the Arasan variations might not have timing
+		 * requirements met at 25MHz for Default Speed mode,
+		 * those controllers work at 19MHz instead.
+		 */
+		if (clock == DEFAULT_SPEED_MAX_DTR)
+			clock = (DEFAULT_SPEED_MAX_DTR * 19) / 25;
+	}
+
 	/* Set the Input and Output Clock Phase Delays */
 	if (clk_data->set_clk_delays)
 		clk_data->set_clk_delays(host);
@@ -1598,6 +1614,8 @@ static int sdhci_arasan_probe(struct platform_device *pdev)
 	if (of_device_is_compatible(np, "xlnx,zynqmp-8.9a")) {
 		host->mmc_host_ops.execute_tuning =
 			arasan_zynqmp_execute_tuning;
+
+		sdhci_arasan->quirks |= SDHCI_ARASAN_QUIRK_CLOCK_25_BROKEN;
 	}
 
 	arasan_dt_parse_clk_phases(dev, &sdhci_arasan->clk_data);
-- 
2.1.1

[PATCH 1/7] mmc: sdhci-of-arasan: Modified SD default speed to 19MHz for ZynqMP

[Manish Narani]

SD standard speed timing was met only at 19MHz and not 25 MHz, that's
why changing driver to 19MHz. The reason for this is when a level shifter
is used on the board, timing was met for standard speed only at 19MHz.
Since this level shifter is commonly required for high speed modes,
the driver is modified to use standard speed of 19Mhz.

Signed-off-by: Manish Narani <manish.narani@xilinx.com>
---
 drivers/mmc/host/sdhci-of-arasan.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index 839965f..fc3e41c 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -159,6 +159,12 @@ struct sdhci_arasan_data {
 /* Controller immediately reports SDHCI_CLOCK_INT_STABLE after enabling the
  * internal clock even when the clock isn't stable */
 #define SDHCI_ARASAN_QUIRK_CLOCK_UNSTABLE BIT(1)
+/*
+ * Some of the Arasan variations might not have timing requirements
+ * met at 25MHz for Default Speed mode, those controllers work at
+ * 19MHz instead
+ */
+#define SDHCI_ARASAN_QUIRK_CLOCK_25_BROKEN BIT(2)
 };
 
 struct sdhci_arasan_of_data {
@@ -290,6 +296,16 @@ static void sdhci_arasan_set_clock(struct sdhci_host *host, unsigned int clock)
 		sdhci_arasan->is_phy_on = false;
 	}
 
+	if (sdhci_arasan->quirks & SDHCI_ARASAN_QUIRK_CLOCK_25_BROKEN) {
+		/*
+		 * Some of the Arasan variations might not have timing
+		 * requirements met at 25MHz for Default Speed mode,
+		 * those controllers work at 19MHz instead.
+		 */
+		if (clock == DEFAULT_SPEED_MAX_DTR)
+			clock = (DEFAULT_SPEED_MAX_DTR * 19) / 25;
+	}
+
 	/* Set the Input and Output Clock Phase Delays */
 	if (clk_data->set_clk_delays)
 		clk_data->set_clk_delays(host);
@@ -1598,6 +1614,8 @@ static int sdhci_arasan_probe(struct platform_device *pdev)
 	if (of_device_is_compatible(np, "xlnx,zynqmp-8.9a")) {
 		host->mmc_host_ops.execute_tuning =
 			arasan_zynqmp_execute_tuning;
+
+		sdhci_arasan->quirks |= SDHCI_ARASAN_QUIRK_CLOCK_25_BROKEN;
 	}
 
 	arasan_dt_parse_clk_phases(dev, &sdhci_arasan->clk_data);
-- 
2.1.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 2/7] mmc: sdhci-of-arasan: Add "SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12" quirk.

[Manish Narani]

Arasan controller supports AUTO CMD12, this patch adds
"SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12" quirk to enable auto cmd12
feature.
By using auto cmd12 we can also avoid following error message
"Got data interrupt even though no data operation in progress"

Signed-off-by: Manish Narani <manish.narani@xilinx.com>
---
 drivers/mmc/host/sdhci-of-arasan.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index fc3e41c..b13e719 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -1616,6 +1616,7 @@ static int sdhci_arasan_probe(struct platform_device *pdev)
 			arasan_zynqmp_execute_tuning;
 
 		sdhci_arasan->quirks |= SDHCI_ARASAN_QUIRK_CLOCK_25_BROKEN;
+		host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12;
 	}
 
 	arasan_dt_parse_clk_phases(dev, &sdhci_arasan->clk_data);
-- 
2.1.1

[PATCH 2/7] mmc: sdhci-of-arasan: Add "SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12" quirk.

[Manish Narani]

Arasan controller supports AUTO CMD12, this patch adds
"SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12" quirk to enable auto cmd12
feature.
By using auto cmd12 we can also avoid following error message
"Got data interrupt even though no data operation in progress"

Signed-off-by: Manish Narani <manish.narani@xilinx.com>
---
 drivers/mmc/host/sdhci-of-arasan.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index fc3e41c..b13e719 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -1616,6 +1616,7 @@ static int sdhci_arasan_probe(struct platform_device *pdev)
 			arasan_zynqmp_execute_tuning;
 
 		sdhci_arasan->quirks |= SDHCI_ARASAN_QUIRK_CLOCK_25_BROKEN;
+		host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12;
 	}
 
 	arasan_dt_parse_clk_phases(dev, &sdhci_arasan->clk_data);
-- 
2.1.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 3/7] mmc: sdhci-of-arasan: Skip Auto tuning for DDR50 mode in ZynqMP platform

[Manish Narani]

ZynqMP platform does not perform auto tuning in DDR50 mode. Skip the
same while the card is operating in DDR50 mode.

Signed-off-by: Manish Narani <manish.narani@xilinx.com>
---
 drivers/mmc/host/sdhci-of-arasan.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index b13e719..1980d0b 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -894,6 +894,10 @@ static int arasan_zynqmp_execute_tuning(struct mmc_host *mmc, u32 opcode)
 							   NODE_SD_1;
 	int err;
 
+	/* ZynqMP SD controller does not perform auto tuning in DDR50 mode */
+	if (mmc->ios.timing == MMC_TIMING_UHS_DDR50)
+		return 0;
+
 	arasan_zynqmp_dll_reset(host, device_id);
 
 	err = sdhci_execute_tuning(mmc, opcode);
-- 
2.1.1

[PATCH 3/7] mmc: sdhci-of-arasan: Skip Auto tuning for DDR50 mode in ZynqMP platform

[Manish Narani]

ZynqMP platform does not perform auto tuning in DDR50 mode. Skip the
same while the card is operating in DDR50 mode.

Signed-off-by: Manish Narani <manish.narani@xilinx.com>
---
 drivers/mmc/host/sdhci-of-arasan.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index b13e719..1980d0b 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -894,6 +894,10 @@ static int arasan_zynqmp_execute_tuning(struct mmc_host *mmc, u32 opcode)
 							   NODE_SD_1;
 	int err;
 
+	/* ZynqMP SD controller does not perform auto tuning in DDR50 mode */
+	if (mmc->ios.timing == MMC_TIMING_UHS_DDR50)
+		return 0;
+
 	arasan_zynqmp_dll_reset(host, device_id);
 
 	err = sdhci_execute_tuning(mmc, opcode);
-- 
2.1.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 4/7] mmc: host: sdhci-of-arasan: Check return value of non-void funtions

[Manish Narani]

At a couple of places, the return values of the non-void functions were
not getting checked. This was reported by the coverity tool. Modify the
code to check the return values of the same.

Addresses-Coverity: ("check_return")
Signed-off-by: Manish Narani <manish.narani@xilinx.com>
---
 drivers/mmc/host/sdhci-of-arasan.c | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index 1980d0b..98671a3 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -273,7 +273,12 @@ static void sdhci_arasan_set_clock(struct sdhci_host *host, unsigned int clock)
 			 * through low speeds without power cycling.
 			 */
 			sdhci_set_clock(host, host->max_clk);
-			phy_power_on(sdhci_arasan->phy);
+			if (phy_power_on(sdhci_arasan->phy)) {
+				pr_err("%s: Cannot power on phy.\n",
+				       mmc_hostname(host->mmc));
+				return;
+			}
+
 			sdhci_arasan->is_phy_on = true;
 
 			/*
@@ -323,7 +328,12 @@ static void sdhci_arasan_set_clock(struct sdhci_host *host, unsigned int clock)
 		msleep(20);
 
 	if (ctrl_phy) {
-		phy_power_on(sdhci_arasan->phy);
+		if (phy_power_on(sdhci_arasan->phy)) {
+			pr_err("%s: Cannot power on phy.\n",
+			       mmc_hostname(host->mmc));
+			return;
+		}
+
 		sdhci_arasan->is_phy_on = true;
 	}
 }
@@ -479,7 +489,9 @@ static int sdhci_arasan_suspend(struct device *dev)
 		ret = phy_power_off(sdhci_arasan->phy);
 		if (ret) {
 			dev_err(dev, "Cannot power off phy.\n");
-			sdhci_resume_host(host);
+			if (sdhci_resume_host(host))
+				dev_err(dev, "Cannot resume host.\n");
+
 			return ret;
 		}
 		sdhci_arasan->is_phy_on = false;
-- 
2.1.1

[PATCH 4/7] mmc: host: sdhci-of-arasan: Check return value of non-void funtions

[Manish Narani]

At a couple of places, the return values of the non-void functions were
not getting checked. This was reported by the coverity tool. Modify the
code to check the return values of the same.

Addresses-Coverity: ("check_return")
Signed-off-by: Manish Narani <manish.narani@xilinx.com>
---
 drivers/mmc/host/sdhci-of-arasan.c | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index 1980d0b..98671a3 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -273,7 +273,12 @@ static void sdhci_arasan_set_clock(struct sdhci_host *host, unsigned int clock)
 			 * through low speeds without power cycling.
 			 */
 			sdhci_set_clock(host, host->max_clk);
-			phy_power_on(sdhci_arasan->phy);
+			if (phy_power_on(sdhci_arasan->phy)) {
+				pr_err("%s: Cannot power on phy.\n",
+				       mmc_hostname(host->mmc));
+				return;
+			}
+
 			sdhci_arasan->is_phy_on = true;
 
 			/*
@@ -323,7 +328,12 @@ static void sdhci_arasan_set_clock(struct sdhci_host *host, unsigned int clock)
 		msleep(20);
 
 	if (ctrl_phy) {
-		phy_power_on(sdhci_arasan->phy);
+		if (phy_power_on(sdhci_arasan->phy)) {
+			pr_err("%s: Cannot power on phy.\n",
+			       mmc_hostname(host->mmc));
+			return;
+		}
+
 		sdhci_arasan->is_phy_on = true;
 	}
 }
@@ -479,7 +489,9 @@ static int sdhci_arasan_suspend(struct device *dev)
 		ret = phy_power_off(sdhci_arasan->phy);
 		if (ret) {
 			dev_err(dev, "Cannot power off phy.\n");
-			sdhci_resume_host(host);
+			if (sdhci_resume_host(host))
+				dev_err(dev, "Cannot resume host.\n");
+
 			return ret;
 		}
 		sdhci_arasan->is_phy_on = false;
-- 
2.1.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 5/7] mmc: host: sdhci-of-arasan: Use appropriate type of division macro

[Manish Narani]

The division macro DIV_ROUND_CLOSEST takes int values as the argument.
However the code here uses unsigned int values for this, which is
causing the values comparison with 0 as always true. We can use
DIV_ROUND_CLOSEST_ULL instead for the same.

Addresses-coverity: ("result_independent_of_operands")
Signed-off-by: Manish Narani <manish.narani@xilinx.com>
---
 drivers/mmc/host/sdhci-of-arasan.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index 98671a3..510d8fc 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -984,7 +984,7 @@ static void sdhci_arasan_update_baseclkfreq(struct sdhci_host *host)
 	struct sdhci_arasan_data *sdhci_arasan = sdhci_pltfm_priv(pltfm_host);
 	const struct sdhci_arasan_soc_ctl_map *soc_ctl_map =
 		sdhci_arasan->soc_ctl_map;
-	u32 mhz = DIV_ROUND_CLOSEST(clk_get_rate(pltfm_host->clk), 1000000);
+	u32 mhz = DIV_ROUND_CLOSEST_ULL(clk_get_rate(pltfm_host->clk), 1000000);
 
 	/* Having a map is optional */
 	if (!soc_ctl_map)
-- 
2.1.1

[PATCH 5/7] mmc: host: sdhci-of-arasan: Use appropriate type of division macro

[Manish Narani]

The division macro DIV_ROUND_CLOSEST takes int values as the argument.
However the code here uses unsigned int values for this, which is
causing the values comparison with 0 as always true. We can use
DIV_ROUND_CLOSEST_ULL instead for the same.

Addresses-coverity: ("result_independent_of_operands")
Signed-off-by: Manish Narani <manish.narani@xilinx.com>
---
 drivers/mmc/host/sdhci-of-arasan.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index 98671a3..510d8fc 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -984,7 +984,7 @@ static void sdhci_arasan_update_baseclkfreq(struct sdhci_host *host)
 	struct sdhci_arasan_data *sdhci_arasan = sdhci_pltfm_priv(pltfm_host);
 	const struct sdhci_arasan_soc_ctl_map *soc_ctl_map =
 		sdhci_arasan->soc_ctl_map;
-	u32 mhz = DIV_ROUND_CLOSEST(clk_get_rate(pltfm_host->clk), 1000000);
+	u32 mhz = DIV_ROUND_CLOSEST_ULL(clk_get_rate(pltfm_host->clk), 1000000);
 
 	/* Having a map is optional */
 	if (!soc_ctl_map)
-- 
2.1.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 6/7] mmc: host: sdhci-of-arasan: Modify data type of the clk_phase array

[Manish Narani]

Modify the data type of the clk_phase array to u32 to make it compatible
with the argument requirement of "of_property_read_variable_u32_array".

Addresses-coverity: ("incompatible_param")
Signed-off-by: Manish Narani <manish.narani@xilinx.com>
---
 drivers/mmc/host/sdhci-of-arasan.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index 510d8fc..61fe13c 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -1018,7 +1018,7 @@ static void arasan_dt_read_clk_phase(struct device *dev,
 {
 	struct device_node *np = dev->of_node;
 
-	int clk_phase[2] = {0};
+	u32 clk_phase[2] = {0};
 
 	/*
 	 * Read Tap Delay values from DT, if the DT does not contain the
-- 
2.1.1

[PATCH 6/7] mmc: host: sdhci-of-arasan: Modify data type of the clk_phase array

[Manish Narani]

Modify the data type of the clk_phase array to u32 to make it compatible
with the argument requirement of "of_property_read_variable_u32_array".

Addresses-coverity: ("incompatible_param")
Signed-off-by: Manish Narani <manish.narani@xilinx.com>
---
 drivers/mmc/host/sdhci-of-arasan.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index 510d8fc..61fe13c 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -1018,7 +1018,7 @@ static void arasan_dt_read_clk_phase(struct device *dev,
 {
 	struct device_node *np = dev->of_node;
 
-	int clk_phase[2] = {0};
+	u32 clk_phase[2] = {0};
 
 	/*
 	 * Read Tap Delay values from DT, if the DT does not contain the
-- 
2.1.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 7/7] mmc: arasan: Fix the issue in reading tap values from DT

[Manish Narani]

From: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>

'of_property_read_variable_u32_array' function returns number
of elements read on success. This patch updates the condition
check in the driver to overwrite the tap values from DT if exist.

Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
Signed-off-by: Manish Narani <manish.narani@xilinx.com>
---
 drivers/mmc/host/sdhci-of-arasan.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index 61fe13c..3f50095 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -1019,13 +1019,15 @@ static void arasan_dt_read_clk_phase(struct device *dev,
 	struct device_node *np = dev->of_node;
 
 	u32 clk_phase[2] = {0};
+	int ret;
 
 	/*
 	 * Read Tap Delay values from DT, if the DT does not contain the
 	 * Tap Values then use the pre-defined values.
 	 */
-	if (of_property_read_variable_u32_array(np, prop, &clk_phase[0],
-						2, 0)) {
+	ret = of_property_read_variable_u32_array(np, prop, &clk_phase[0],
+						  2, 0);
+	if (ret < 0) {
 		dev_dbg(dev, "Using predefined clock phase for %s = %d %d\n",
 			prop, clk_data->clk_phase_in[timing],
 			clk_data->clk_phase_out[timing]);
-- 
2.1.1

[PATCH 7/7] mmc: arasan: Fix the issue in reading tap values from DT

[Manish Narani]

From: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>

'of_property_read_variable_u32_array' function returns number
of elements read on success. This patch updates the condition
check in the driver to overwrite the tap values from DT if exist.

Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
Signed-off-by: Manish Narani <manish.narani@xilinx.com>
---
 drivers/mmc/host/sdhci-of-arasan.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index 61fe13c..3f50095 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -1019,13 +1019,15 @@ static void arasan_dt_read_clk_phase(struct device *dev,
 	struct device_node *np = dev->of_node;
 
 	u32 clk_phase[2] = {0};
+	int ret;
 
 	/*
 	 * Read Tap Delay values from DT, if the DT does not contain the
 	 * Tap Values then use the pre-defined values.
 	 */
-	if (of_property_read_variable_u32_array(np, prop, &clk_phase[0],
-						2, 0)) {
+	ret = of_property_read_variable_u32_array(np, prop, &clk_phase[0],
+						  2, 0);
+	if (ret < 0) {
 		dev_dbg(dev, "Using predefined clock phase for %s = %d %d\n",
 			prop, clk_data->clk_phase_in[timing],
 			clk_data->clk_phase_out[timing]);
-- 
2.1.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 0/7] sdhci-of-arasan driver updates for ZynqMP platform

[Adrian Hunter]

On 15/06/21 1:43 pm, Manish Narani wrote:
> This patch series has some bug fixes for sdhci-of-arasan driver with
> respect to ZynqMP platform. This series also has some code style changes
> in the driver.
> 
> Manish Narani (6):
>   mmc: sdhci-of-arasan: Modified SD default speed to 19MHz for ZynqMP
>   mmc: sdhci-of-arasan: Add "SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12" quirk.
>   mmc: sdhci-of-arasan: Skip Auto tuning for DDR50 mode in ZynqMP
>     platform
>   mmc: host: sdhci-of-arasan: Check return value of non-void funtions
>   mmc: host: sdhci-of-arasan: Use appropriate type of division macro
>   mmc: host: sdhci-of-arasan: Modify data type of the clk_phase array
> 
> Sai Krishna Potthuri (1):
>   mmc: arasan: Fix the issue in reading tap values from DT
> 
>  drivers/mmc/host/sdhci-of-arasan.c | 51 ++++++++++++++++++++++++++++++++------
>  1 file changed, 44 insertions(+), 7 deletions(-)
> 

The subject prefixes look inconsistent, nevertheless, for all 7:

Acked-by: Adrian Hunter <adrian.hunter@intel.com>

Re: [PATCH 0/7] sdhci-of-arasan driver updates for ZynqMP platform

[Adrian Hunter]

On 15/06/21 1:43 pm, Manish Narani wrote:
> This patch series has some bug fixes for sdhci-of-arasan driver with
> respect to ZynqMP platform. This series also has some code style changes
> in the driver.
> 
> Manish Narani (6):
>   mmc: sdhci-of-arasan: Modified SD default speed to 19MHz for ZynqMP
>   mmc: sdhci-of-arasan: Add "SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12" quirk.
>   mmc: sdhci-of-arasan: Skip Auto tuning for DDR50 mode in ZynqMP
>     platform
>   mmc: host: sdhci-of-arasan: Check return value of non-void funtions
>   mmc: host: sdhci-of-arasan: Use appropriate type of division macro
>   mmc: host: sdhci-of-arasan: Modify data type of the clk_phase array
> 
> Sai Krishna Potthuri (1):
>   mmc: arasan: Fix the issue in reading tap values from DT
> 
>  drivers/mmc/host/sdhci-of-arasan.c | 51 ++++++++++++++++++++++++++++++++------
>  1 file changed, 44 insertions(+), 7 deletions(-)
> 

The subject prefixes look inconsistent, nevertheless, for all 7:

Acked-by: Adrian Hunter <adrian.hunter@intel.com>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 0/7] sdhci-of-arasan driver updates for ZynqMP platform

[Ulf Hansson]

On Tue, 15 Jun 2021 at 12:44, Manish Narani <manish.narani@xilinx.com> wrote:
>
> This patch series has some bug fixes for sdhci-of-arasan driver with
> respect to ZynqMP platform. This series also has some code style changes
> in the driver.
>
> Manish Narani (6):
>   mmc: sdhci-of-arasan: Modified SD default speed to 19MHz for ZynqMP
>   mmc: sdhci-of-arasan: Add "SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12" quirk.
>   mmc: sdhci-of-arasan: Skip Auto tuning for DDR50 mode in ZynqMP
>     platform
>   mmc: host: sdhci-of-arasan: Check return value of non-void funtions
>   mmc: host: sdhci-of-arasan: Use appropriate type of division macro
>   mmc: host: sdhci-of-arasan: Modify data type of the clk_phase array
>
> Sai Krishna Potthuri (1):
>   mmc: arasan: Fix the issue in reading tap values from DT
>
>  drivers/mmc/host/sdhci-of-arasan.c | 51 ++++++++++++++++++++++++++++++++------
>  1 file changed, 44 insertions(+), 7 deletions(-)
>
> --
> 2.1.1
>

Queued up for v5.15 (temporary on the devel branch) and by amending
the prefixes, thanks!

Kind regards
Uffe

Re: [PATCH 0/7] sdhci-of-arasan driver updates for ZynqMP platform

[Ulf Hansson]

On Tue, 15 Jun 2021 at 12:44, Manish Narani <manish.narani@xilinx.com> wrote:
>
> This patch series has some bug fixes for sdhci-of-arasan driver with
> respect to ZynqMP platform. This series also has some code style changes
> in the driver.
>
> Manish Narani (6):
>   mmc: sdhci-of-arasan: Modified SD default speed to 19MHz for ZynqMP
>   mmc: sdhci-of-arasan: Add "SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12" quirk.
>   mmc: sdhci-of-arasan: Skip Auto tuning for DDR50 mode in ZynqMP
>     platform
>   mmc: host: sdhci-of-arasan: Check return value of non-void funtions
>   mmc: host: sdhci-of-arasan: Use appropriate type of division macro
>   mmc: host: sdhci-of-arasan: Modify data type of the clk_phase array
>
> Sai Krishna Potthuri (1):
>   mmc: arasan: Fix the issue in reading tap values from DT
>
>  drivers/mmc/host/sdhci-of-arasan.c | 51 ++++++++++++++++++++++++++++++++------
>  1 file changed, 44 insertions(+), 7 deletions(-)
>
> --
> 2.1.1
>

Queued up for v5.15 (temporary on the devel branch) and by amending
the prefixes, thanks!

Kind regards
Uffe

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel