* [PATCH 0/2] atm: nicstar: fix two bugs about error handling
@ 2021-06-20 15:24 Zheyu Ma
2021-06-20 15:24 ` [PATCH 1/2] atm: nicstar: use 'dma_free_coherent' instead of 'kfree' Zheyu Ma
2021-06-20 15:24 ` [PATCH 2/2] atm: nicstar: register the interrupt handler in the right place Zheyu Ma
0 siblings, 2 replies; 3+ messages in thread
From: Zheyu Ma @ 2021-06-20 15:24 UTC (permalink / raw)
To: 3chas3; +Cc: linux-atm-general, netdev, linux-kernel, Zheyu Ma
Zheyu Ma (2):
atm: nicstar: use 'dma_free_coherent' instead of 'kfree'
atm: nicstar: register the interrupt handler in the right place
drivers/atm/nicstar.c | 24 +++++++++++++-----------
1 file changed, 13 insertions(+), 11 deletions(-)
--
2.17.6
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH 1/2] atm: nicstar: use 'dma_free_coherent' instead of 'kfree'
2021-06-20 15:24 [PATCH 0/2] atm: nicstar: fix two bugs about error handling Zheyu Ma
@ 2021-06-20 15:24 ` Zheyu Ma
2021-06-20 15:24 ` [PATCH 2/2] atm: nicstar: register the interrupt handler in the right place Zheyu Ma
1 sibling, 0 replies; 3+ messages in thread
From: Zheyu Ma @ 2021-06-20 15:24 UTC (permalink / raw)
To: 3chas3; +Cc: linux-atm-general, netdev, linux-kernel, Zheyu Ma
When 'nicstar_init_one' fails, 'ns_init_card_error' will be executed for
error handling, but the correct memory free function should be used,
otherwise it will cause an error. Since 'card->rsq.org' and
'card->tsq.org' are allocated using 'dma_alloc_coherent' function, they
should be freed using 'dma_free_coherent'.
Fix this by using 'dma_free_coherent' instead of 'kfree'
This log reveals it:
[ 3.440294] kernel BUG at mm/slub.c:4206!
[ 3.441059] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[ 3.441430] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.12.4-g70e7f0549188-dirty #141
[ 3.441986] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[ 3.442780] RIP: 0010:kfree+0x26a/0x300
[ 3.443065] Code: e8 3a c3 b9 ff e9 d6 fd ff ff 49 8b 45 00 31 db a9 00 00 01 00 75 4d 49 8b 45 00 a9 00 00 01 00 75 0a 49 8b 45 08 a8 01 75 02 <0f> 0b 89 d9 b8 00 10 00 00 be 06 00 00 00 48 d3 e0 f7 d8 48 63 d0
[ 3.443396] RSP: 0000:ffffc90000017b70 EFLAGS: 00010246
[ 3.443396] RAX: dead000000000100 RBX: 0000000000000000 RCX: 0000000000000000
[ 3.443396] RDX: 0000000000000000 RSI: ffffffff85d3df94 RDI: ffffffff85df38e6
[ 3.443396] RBP: ffffc90000017b90 R08: 0000000000000001 R09: 0000000000000001
[ 3.443396] R10: 0000000000000000 R11: 0000000000000001 R12: ffff888107dc0000
[ 3.443396] R13: ffffea00001f0100 R14: ffff888101a8bf00 R15: ffff888107dc0160
[ 3.443396] FS: 0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000
[ 3.443396] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3.443396] CR2: 0000000000000000 CR3: 000000000642e000 CR4: 00000000000006e0
[ 3.443396] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 3.443396] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 3.443396] Call Trace:
[ 3.443396] ns_init_card_error+0x12c/0x220
[ 3.443396] nicstar_init_one+0x10d2/0x1130
[ 3.443396] local_pci_probe+0x4a/0xb0
[ 3.443396] pci_device_probe+0x126/0x1d0
[ 3.443396] ? pci_device_remove+0x100/0x100
[ 3.443396] really_probe+0x27e/0x650
[ 3.443396] driver_probe_device+0x84/0x1d0
[ 3.443396] ? mutex_lock_nested+0x16/0x20
[ 3.443396] device_driver_attach+0x63/0x70
[ 3.443396] __driver_attach+0x117/0x1a0
[ 3.443396] ? device_driver_attach+0x70/0x70
[ 3.443396] bus_for_each_dev+0xb6/0x110
[ 3.443396] ? rdinit_setup+0x40/0x40
[ 3.443396] driver_attach+0x22/0x30
[ 3.443396] bus_add_driver+0x1e6/0x2a0
[ 3.443396] driver_register+0xa4/0x180
[ 3.443396] __pci_register_driver+0x77/0x80
[ 3.443396] ? uPD98402_module_init+0xd/0xd
[ 3.443396] nicstar_init+0x1f/0x75
[ 3.443396] do_one_initcall+0x7a/0x3d0
[ 3.443396] ? rdinit_setup+0x40/0x40
[ 3.443396] ? rcu_read_lock_sched_held+0x4a/0x70
[ 3.443396] kernel_init_freeable+0x2a7/0x2f9
[ 3.443396] ? rest_init+0x2c0/0x2c0
[ 3.443396] kernel_init+0x13/0x180
[ 3.443396] ? rest_init+0x2c0/0x2c0
[ 3.443396] ? rest_init+0x2c0/0x2c0
[ 3.443396] ret_from_fork+0x1f/0x30
[ 3.443396] Modules linked in:
[ 3.443396] Dumping ftrace buffer:
[ 3.443396] (ftrace buffer empty)
[ 3.458593] ---[ end trace 3c6f8f0d8ef59bcd ]---
[ 3.458922] RIP: 0010:kfree+0x26a/0x300
[ 3.459198] Code: e8 3a c3 b9 ff e9 d6 fd ff ff 49 8b 45 00 31 db a9 00 00 01 00 75 4d 49 8b 45 00 a9 00 00 01 00 75 0a 49 8b 45 08 a8 01 75 02 <0f> 0b 89 d9 b8 00 10 00 00 be 06 00 00 00 48 d3 e0 f7 d8 48 63 d0
[ 3.460499] RSP: 0000:ffffc90000017b70 EFLAGS: 00010246
[ 3.460870] RAX: dead000000000100 RBX: 0000000000000000 RCX: 0000000000000000
[ 3.461371] RDX: 0000000000000000 RSI: ffffffff85d3df94 RDI: ffffffff85df38e6
[ 3.461873] RBP: ffffc90000017b90 R08: 0000000000000001 R09: 0000000000000001
[ 3.462372] R10: 0000000000000000 R11: 0000000000000001 R12: ffff888107dc0000
[ 3.462871] R13: ffffea00001f0100 R14: ffff888101a8bf00 R15: ffff888107dc0160
[ 3.463368] FS: 0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000
[ 3.463949] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3.464356] CR2: 0000000000000000 CR3: 000000000642e000 CR4: 00000000000006e0
[ 3.464856] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 3.465356] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 3.465860] Kernel panic - not syncing: Fatal exception
[ 3.466370] Dumping ftrace buffer:
[ 3.466616] (ftrace buffer empty)
[ 3.466871] Kernel Offset: disabled
[ 3.467122] Rebooting in 1 seconds..
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
---
drivers/atm/nicstar.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/atm/nicstar.c b/drivers/atm/nicstar.c
index 5c7e4df159b9..e031f6d74e7e 100644
--- a/drivers/atm/nicstar.c
+++ b/drivers/atm/nicstar.c
@@ -839,10 +839,12 @@ static void ns_init_card_error(ns_dev *card, int error)
dev_kfree_skb_any(hb);
}
if (error >= 12) {
- kfree(card->rsq.org);
+ dma_free_coherent(&card->pcidev->dev, NS_RSQSIZE + NS_RSQ_ALIGNMENT,
+ card->rsq.org, card->rsq.dma);
}
if (error >= 11) {
- kfree(card->tsq.org);
+ dma_free_coherent(&card->pcidev->dev, NS_TSQSIZE + NS_TSQ_ALIGNMENT,
+ card->tsq.org, card->tsq.dma);
}
if (error >= 10) {
free_irq(card->pcidev->irq, card);
--
2.17.6
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH 2/2] atm: nicstar: register the interrupt handler in the right place
2021-06-20 15:24 [PATCH 0/2] atm: nicstar: fix two bugs about error handling Zheyu Ma
2021-06-20 15:24 ` [PATCH 1/2] atm: nicstar: use 'dma_free_coherent' instead of 'kfree' Zheyu Ma
@ 2021-06-20 15:24 ` Zheyu Ma
1 sibling, 0 replies; 3+ messages in thread
From: Zheyu Ma @ 2021-06-20 15:24 UTC (permalink / raw)
To: 3chas3; +Cc: linux-atm-general, netdev, linux-kernel, Zheyu Ma
Because the error handling is sequential, the application of resources
should be carried out in the order of error handling, so the operation
of registering the interrupt handler should be put in front, so as not
to free the unregistered interrupt handler during error handling.
This log reveals it:
[ 3.438724] Trying to free already-free IRQ 23
[ 3.439060] WARNING: CPU: 5 PID: 1 at kernel/irq/manage.c:1825 free_irq+0xfb/0x480
[ 3.440039] Modules linked in:
[ 3.440257] CPU: 5 PID: 1 Comm: swapper/0 Not tainted 5.12.4-g70e7f0549188-dirty #142
[ 3.440793] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[ 3.441561] RIP: 0010:free_irq+0xfb/0x480
[ 3.441845] Code: 6e 08 74 6f 4d 89 f4 e8 c3 78 09 00 4d 8b 74 24 18 4d 85 f6 75 e3 e8 b4 78 09 00 8b 75 c8 48 c7 c7 a0 ac d5 85 e8 95 d7 f5 ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 87 c5 90 03 48 8b 43 40 4c 8b a0 80
[ 3.443121] RSP: 0000:ffffc90000017b50 EFLAGS: 00010086
[ 3.443483] RAX: 0000000000000000 RBX: ffff888107c6f000 RCX: 0000000000000000
[ 3.443972] RDX: 0000000000000000 RSI: ffffffff8123f301 RDI: 00000000ffffffff
[ 3.444462] RBP: ffffc90000017b90 R08: 0000000000000001 R09: 0000000000000003
[ 3.444950] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
[ 3.444994] R13: ffff888107dc0000 R14: ffff888104f6bf00 R15: ffff888107c6f0a8
[ 3.444994] FS: 0000000000000000(0000) GS:ffff88817bd40000(0000) knlGS:0000000000000000
[ 3.444994] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3.444994] CR2: 0000000000000000 CR3: 000000000642e000 CR4: 00000000000006e0
[ 3.444994] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 3.444994] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 3.444994] Call Trace:
[ 3.444994] ns_init_card_error+0x18e/0x250
[ 3.444994] nicstar_init_one+0x10d2/0x1130
[ 3.444994] local_pci_probe+0x4a/0xb0
[ 3.444994] pci_device_probe+0x126/0x1d0
[ 3.444994] ? pci_device_remove+0x100/0x100
[ 3.444994] really_probe+0x27e/0x650
[ 3.444994] driver_probe_device+0x84/0x1d0
[ 3.444994] ? mutex_lock_nested+0x16/0x20
[ 3.444994] device_driver_attach+0x63/0x70
[ 3.444994] __driver_attach+0x117/0x1a0
[ 3.444994] ? device_driver_attach+0x70/0x70
[ 3.444994] bus_for_each_dev+0xb6/0x110
[ 3.444994] ? rdinit_setup+0x40/0x40
[ 3.444994] driver_attach+0x22/0x30
[ 3.444994] bus_add_driver+0x1e6/0x2a0
[ 3.444994] driver_register+0xa4/0x180
[ 3.444994] __pci_register_driver+0x77/0x80
[ 3.444994] ? uPD98402_module_init+0xd/0xd
[ 3.444994] nicstar_init+0x1f/0x75
[ 3.444994] do_one_initcall+0x7a/0x3d0
[ 3.444994] ? rdinit_setup+0x40/0x40
[ 3.444994] ? rcu_read_lock_sched_held+0x4a/0x70
[ 3.444994] kernel_init_freeable+0x2a7/0x2f9
[ 3.444994] ? rest_init+0x2c0/0x2c0
[ 3.444994] kernel_init+0x13/0x180
[ 3.444994] ? rest_init+0x2c0/0x2c0
[ 3.444994] ? rest_init+0x2c0/0x2c0
[ 3.444994] ret_from_fork+0x1f/0x30
[ 3.444994] Kernel panic - not syncing: panic_on_warn set ...
[ 3.444994] CPU: 5 PID: 1 Comm: swapper/0 Not tainted 5.12.4-g70e7f0549188-dirty #142
[ 3.444994] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[ 3.444994] Call Trace:
[ 3.444994] dump_stack+0xba/0xf5
[ 3.444994] ? free_irq+0xfb/0x480
[ 3.444994] panic+0x155/0x3ed
[ 3.444994] ? __warn+0xed/0x150
[ 3.444994] ? free_irq+0xfb/0x480
[ 3.444994] __warn+0x103/0x150
[ 3.444994] ? free_irq+0xfb/0x480
[ 3.444994] report_bug+0x119/0x1c0
[ 3.444994] handle_bug+0x3b/0x80
[ 3.444994] exc_invalid_op+0x18/0x70
[ 3.444994] asm_exc_invalid_op+0x12/0x20
[ 3.444994] RIP: 0010:free_irq+0xfb/0x480
[ 3.444994] Code: 6e 08 74 6f 4d 89 f4 e8 c3 78 09 00 4d 8b 74 24 18 4d 85 f6 75 e3 e8 b4 78 09 00 8b 75 c8 48 c7 c7 a0 ac d5 85 e8 95 d7 f5 ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 87 c5 90 03 48 8b 43 40 4c 8b a0 80
[ 3.444994] RSP: 0000:ffffc90000017b50 EFLAGS: 00010086
[ 3.444994] RAX: 0000000000000000 RBX: ffff888107c6f000 RCX: 0000000000000000
[ 3.444994] RDX: 0000000000000000 RSI: ffffffff8123f301 RDI: 00000000ffffffff
[ 3.444994] RBP: ffffc90000017b90 R08: 0000000000000001 R09: 0000000000000003
[ 3.444994] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
[ 3.444994] R13: ffff888107dc0000 R14: ffff888104f6bf00 R15: ffff888107c6f0a8
[ 3.444994] ? vprintk_func+0x71/0x110
[ 3.444994] ns_init_card_error+0x18e/0x250
[ 3.444994] nicstar_init_one+0x10d2/0x1130
[ 3.444994] local_pci_probe+0x4a/0xb0
[ 3.444994] pci_device_probe+0x126/0x1d0
[ 3.444994] ? pci_device_remove+0x100/0x100
[ 3.444994] really_probe+0x27e/0x650
[ 3.444994] driver_probe_device+0x84/0x1d0
[ 3.444994] ? mutex_lock_nested+0x16/0x20
[ 3.444994] device_driver_attach+0x63/0x70
[ 3.444994] __driver_attach+0x117/0x1a0
[ 3.444994] ? device_driver_attach+0x70/0x70
[ 3.444994] bus_for_each_dev+0xb6/0x110
[ 3.444994] ? rdinit_setup+0x40/0x40
[ 3.444994] driver_attach+0x22/0x30
[ 3.444994] bus_add_driver+0x1e6/0x2a0
[ 3.444994] driver_register+0xa4/0x180
[ 3.444994] __pci_register_driver+0x77/0x80
[ 3.444994] ? uPD98402_module_init+0xd/0xd
[ 3.444994] nicstar_init+0x1f/0x75
[ 3.444994] do_one_initcall+0x7a/0x3d0
[ 3.444994] ? rdinit_setup+0x40/0x40
[ 3.444994] ? rcu_read_lock_sched_held+0x4a/0x70
[ 3.444994] kernel_init_freeable+0x2a7/0x2f9
[ 3.444994] ? rest_init+0x2c0/0x2c0
[ 3.444994] kernel_init+0x13/0x180
[ 3.444994] ? rest_init+0x2c0/0x2c0
[ 3.444994] ? rest_init+0x2c0/0x2c0
[ 3.444994] ret_from_fork+0x1f/0x30
[ 3.444994] Dumping ftrace buffer:
[ 3.444994] (ftrace buffer empty)
[ 3.444994] Kernel Offset: disabled
[ 3.444994] Rebooting in 1 seconds..
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
---
drivers/atm/nicstar.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/atm/nicstar.c b/drivers/atm/nicstar.c
index e031f6d74e7e..e5117144347f 100644
--- a/drivers/atm/nicstar.c
+++ b/drivers/atm/nicstar.c
@@ -527,6 +527,15 @@ static int ns_init_card(int i, struct pci_dev *pcidev)
/* Set the VPI/VCI MSb mask to zero so we can receive OAM cells */
writel(0x00000000, card->membase + VPM);
+ card->intcnt = 0;
+ if (request_irq
+ (pcidev->irq, &ns_irq_handler, IRQF_SHARED, "nicstar", card) != 0) {
+ pr_err("nicstar%d: can't allocate IRQ %d.\n", i, pcidev->irq);
+ error = 9;
+ ns_init_card_error(card, error);
+ return error;
+ }
+
/* Initialize TSQ */
card->tsq.org = dma_alloc_coherent(&card->pcidev->dev,
NS_TSQSIZE + NS_TSQ_ALIGNMENT,
@@ -753,15 +762,6 @@ static int ns_init_card(int i, struct pci_dev *pcidev)
card->efbie = 1;
- card->intcnt = 0;
- if (request_irq
- (pcidev->irq, &ns_irq_handler, IRQF_SHARED, "nicstar", card) != 0) {
- printk("nicstar%d: can't allocate IRQ %d.\n", i, pcidev->irq);
- error = 9;
- ns_init_card_error(card, error);
- return error;
- }
-
/* Register device */
card->atmdev = atm_dev_register("nicstar", &card->pcidev->dev, &atm_ops,
-1, NULL);
--
2.17.6
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-06-20 15:24 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-06-20 15:24 [PATCH 0/2] atm: nicstar: fix two bugs about error handling Zheyu Ma
2021-06-20 15:24 ` [PATCH 1/2] atm: nicstar: use 'dma_free_coherent' instead of 'kfree' Zheyu Ma
2021-06-20 15:24 ` [PATCH 2/2] atm: nicstar: register the interrupt handler in the right place Zheyu Ma
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.