From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> To: Pavel Machek <pavel@ucw.cz>, intel-gfx@lists.freedesktop.org, jani.nikula@linux.intel.com, kernel list <linux-kernel@vger.kernel.org>, rodrigo.vivi@intel.com Subject: Re: 5.13-rc6 on thinkpad X220: graphics hangs with recent mainline Date: Mon, 28 Jun 2021 13:21:16 +0300 [thread overview] Message-ID: <162487567602.6944.6736788493261786550@jlahtine-mobl.ger.corp.intel.com> (raw) In-Reply-To: <20210624095359.GA29649@duo.ucw.cz> Quoting Pavel Machek (2021-06-24 12:53:59) > Hi! > > I'm getting graphics problems with 5.13-rc: > > Debian 10.9, X, chromium and flightgear is in use. Things were more > stable than this with previous kernels. > > Any ideas? The error you are seeing: > [185300.784992] i915 0000:00:02.0: [drm] Resetting chip for stopped heartbeat on rcs0 > [185300.888694] i915 0000:00:02.0: [drm] fgfs[27370] context reset due to GPU hang That just indicates that the rendering took too long. It could be caused by a change in how the application renders, userspace driver or i915. So a previously on-the-edge-of-timeout operation may have got pushed beyond the timeout, or the rendering genuinely got completely stuck. If you only updated the kernel, not the application or userspace, could you bisect the commit that introduced the behavior and report: https://gitlab.freedesktop.org/drm/intel/-/wikis/How-to-file-i915-bugs We have changes around this area, so would be helpful if you can bisect the commit that started the behavior. Regards, Joonas > > Best regards, > Pavel > > [185233.329693] wlp3s0: deauthenticated from 5c:f4:ab:10:d2:bb (Reason: 16=GROUP_KEY_HANDSHAKE_TIMEOUT) > [185234.040352] wlp3s0: authenticate with 5c:f4:ab:10:d2:bb > [185234.043836] wlp3s0: send auth to 5c:f4:ab:10:d2:bb (try 1/3) > [185234.046652] wlp3s0: authenticated > [185234.049087] wlp3s0: associate with 5c:f4:ab:10:d2:bb (try 1/3) > [185234.052667] wlp3s0: RX AssocResp from 5c:f4:ab:10:d2:bb (capab=0x411 status=0 aid=1) > [185234.055398] wlp3s0: associated > [185300.784992] i915 0000:00:02.0: [drm] Resetting chip for stopped heartbeat on rcs0 > [185300.888694] i915 0000:00:02.0: [drm] fgfs[27370] context reset due to GPU hang > [185472.274563] usb 2-1.1: USB disconnect, device number 3 > [185472.274578] usb 2-1.1.2: USB disconnect, device number 5 > [185472.281518] hid-generic 0003:04F2:0111.0003: usb_submit_urb(ctrl) failed: -19 > [185472.299837] hid-generic 0003:04F2:0111.0003: usb_submit_urb(ctrl) failed: -19 > [185472.305986] hid-generic 0003:04F2:0111.0003: usb_submit_urb(ctrl) failed: -19 > [185472.328012] hid-generic 0003:04F2:0111.0003: usb_submit_urb(ctrl) failed: -19 > [185472.333738] usb 2-1.1.3: USB disconnect, device number 6 > [185673.454821] usb 2-1.1: new high-speed USB device number 7 using ehci-pci > [185673.563486] usb 2-1.1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11 > [185673.563502] usb 2-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 > [185673.563509] usb 2-1.1: Product: USB 2.0 Hub > [185673.564488] hub 2-1.1:1.0: USB hub found > [185673.564595] hub 2-1.1:1.0: 4 ports detected > ... > [207277.385543] wlp3s0: deauthenticated from 5c:f4:ab:10:d2:bb (Reason: 16=GROUP_KEY_HANDSHAKE_TIMEOUT) > [207278.062061] wlp3s0: authenticate with 5c:f4:ab:10:d2:bb > [207278.068175] wlp3s0: send auth to 5c:f4:ab:10:d2:bb (try 1/3) > [207278.070985] wlp3s0: authenticated > [207278.075545] wlp3s0: associate with 5c:f4:ab:10:d2:bb (try 1/3) > [207278.080793] wlp3s0: RX AssocResp from 5c:f4:ab:10:d2:bb (capab=0x411 status=0 aid=1) > [207278.084081] wlp3s0: associated > [207564.046469] i915 0000:00:02.0: [drm] Resetting chip for stopped heartbeat on rcs0 > [207564.150293] i915 0000:00:02.0: [drm] fgfs[25729] context reset due to GPU hang > [209075.178776] wlp3s0: deauthenticated from 5c:f4:ab:10:d2:bb (Reason: 16=GROUP_KEY_HANDSHAKE_TIMEOUT) > [209075.841872] wlp3s0: authenticate with 5c:f4:ab:10:d2:bb > [209075.845305] wlp3s0: send auth to 5c:f4:ab:10:d2:bb (try 1/3) > [209075.851186] wlp3s0: authenticated > [209075.852537] wlp3s0: associate with 5c:f4:ab:10:d2:bb (try 1/3) > [209075.855972] wlp3s0: RX AssocResp from 5c:f4:ab:10:d2:bb (capab=0x411 status=0 aid=1) > [209075.858522] wlp3s0: associated > [210159.723726] PM: suspend entry (deep) > [210159.741497] Filesystems sync: 0.017 seconds > [210159.743585] Freezing user space processes ... (elapsed 0.009 seconds) done. > [210159.753345] OOM killer disabled. > [210159.753349] Freezing remaining freezable tasks ... (elapsed 0.003 seconds) done. > [210159.757357] printk: Suspending console(s) (use no_console_suspend to debug) > [210159.945365] sd 2:0:0:0: [sdb] Synchronizing SCSI cache > [210159.945443] sd 0:0:0:0: [sda] Synchronizing SCSI cache > [210159.945651] sd 0:0:0:0: [sda] Stopping disk > [210159.947225] sd 2:0:0:0: [sdb] Stopping disk > [210160.019791] wlp3s0: deauthenticating from 5c:f4:ab:10:d2:bb by local choice (Reason: 3=DEAUTH_LEAVING) > [210160.021158] e1000e: EEE TX LPI TIMER: 00000011 > [210161.245106] PM: suspend devices took 1.488 seconds > [210161.266601] ACPI: EC: interrupt blocked > [210161.305431] ACPI: Preparing to enter system sleep state S3 > [210161.313532] ACPI: EC: event blocked > [210161.313535] ACPI: EC: EC stopped > [210161.313537] PM: Saving platform NVS memory > [210161.313548] Disabling non-boot CPUs ... > ... > [224698.957159] wlp3s0: associated > [229707.724067] wlp3s0: deauthenticated from 5c:f4:ab:10:d2:bb (Reason: 16=GROUP_KEY_HANDSHAKE_TIMEOUT) > [229708.370607] wlp3s0: authenticate with 5c:f4:ab:10:d2:bb > [229708.373732] wlp3s0: send auth to 5c:f4:ab:10:d2:bb (try 1/3) > [229708.376501] wlp3s0: authenticated > [229708.379997] wlp3s0: associate with 5c:f4:ab:10:d2:bb (try 1/3) > [229708.383773] wlp3s0: RX AssocResp from 5c:f4:ab:10:d2:bb (capab=0x411 status=0 aid=1) > [229708.386423] wlp3s0: associated > [229756.518759] i915 0000:00:02.0: [drm] Resetting chip for stopped heartbeat on rcs0 > [229756.622596] i915 0000:00:02.0: [drm] fgfs[2648] context reset due to GPU hang > > -- > http://www.livejournal.com/~pavelmachek
WARNING: multiple messages have this Message-ID (diff)
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> To: Pavel Machek <pavel@ucw.cz>, intel-gfx@lists.freedesktop.org, jani.nikula@linux.intel.com, kernel list <linux-kernel@vger.kernel.org>, rodrigo.vivi@intel.com Subject: Re: [Intel-gfx] 5.13-rc6 on thinkpad X220: graphics hangs with recent mainline Date: Mon, 28 Jun 2021 13:21:16 +0300 [thread overview] Message-ID: <162487567602.6944.6736788493261786550@jlahtine-mobl.ger.corp.intel.com> (raw) In-Reply-To: <20210624095359.GA29649@duo.ucw.cz> Quoting Pavel Machek (2021-06-24 12:53:59) > Hi! > > I'm getting graphics problems with 5.13-rc: > > Debian 10.9, X, chromium and flightgear is in use. Things were more > stable than this with previous kernels. > > Any ideas? The error you are seeing: > [185300.784992] i915 0000:00:02.0: [drm] Resetting chip for stopped heartbeat on rcs0 > [185300.888694] i915 0000:00:02.0: [drm] fgfs[27370] context reset due to GPU hang That just indicates that the rendering took too long. It could be caused by a change in how the application renders, userspace driver or i915. So a previously on-the-edge-of-timeout operation may have got pushed beyond the timeout, or the rendering genuinely got completely stuck. If you only updated the kernel, not the application or userspace, could you bisect the commit that introduced the behavior and report: https://gitlab.freedesktop.org/drm/intel/-/wikis/How-to-file-i915-bugs We have changes around this area, so would be helpful if you can bisect the commit that started the behavior. Regards, Joonas > > Best regards, > Pavel > > [185233.329693] wlp3s0: deauthenticated from 5c:f4:ab:10:d2:bb (Reason: 16=GROUP_KEY_HANDSHAKE_TIMEOUT) > [185234.040352] wlp3s0: authenticate with 5c:f4:ab:10:d2:bb > [185234.043836] wlp3s0: send auth to 5c:f4:ab:10:d2:bb (try 1/3) > [185234.046652] wlp3s0: authenticated > [185234.049087] wlp3s0: associate with 5c:f4:ab:10:d2:bb (try 1/3) > [185234.052667] wlp3s0: RX AssocResp from 5c:f4:ab:10:d2:bb (capab=0x411 status=0 aid=1) > [185234.055398] wlp3s0: associated > [185300.784992] i915 0000:00:02.0: [drm] Resetting chip for stopped heartbeat on rcs0 > [185300.888694] i915 0000:00:02.0: [drm] fgfs[27370] context reset due to GPU hang > [185472.274563] usb 2-1.1: USB disconnect, device number 3 > [185472.274578] usb 2-1.1.2: USB disconnect, device number 5 > [185472.281518] hid-generic 0003:04F2:0111.0003: usb_submit_urb(ctrl) failed: -19 > [185472.299837] hid-generic 0003:04F2:0111.0003: usb_submit_urb(ctrl) failed: -19 > [185472.305986] hid-generic 0003:04F2:0111.0003: usb_submit_urb(ctrl) failed: -19 > [185472.328012] hid-generic 0003:04F2:0111.0003: usb_submit_urb(ctrl) failed: -19 > [185472.333738] usb 2-1.1.3: USB disconnect, device number 6 > [185673.454821] usb 2-1.1: new high-speed USB device number 7 using ehci-pci > [185673.563486] usb 2-1.1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11 > [185673.563502] usb 2-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 > [185673.563509] usb 2-1.1: Product: USB 2.0 Hub > [185673.564488] hub 2-1.1:1.0: USB hub found > [185673.564595] hub 2-1.1:1.0: 4 ports detected > ... > [207277.385543] wlp3s0: deauthenticated from 5c:f4:ab:10:d2:bb (Reason: 16=GROUP_KEY_HANDSHAKE_TIMEOUT) > [207278.062061] wlp3s0: authenticate with 5c:f4:ab:10:d2:bb > [207278.068175] wlp3s0: send auth to 5c:f4:ab:10:d2:bb (try 1/3) > [207278.070985] wlp3s0: authenticated > [207278.075545] wlp3s0: associate with 5c:f4:ab:10:d2:bb (try 1/3) > [207278.080793] wlp3s0: RX AssocResp from 5c:f4:ab:10:d2:bb (capab=0x411 status=0 aid=1) > [207278.084081] wlp3s0: associated > [207564.046469] i915 0000:00:02.0: [drm] Resetting chip for stopped heartbeat on rcs0 > [207564.150293] i915 0000:00:02.0: [drm] fgfs[25729] context reset due to GPU hang > [209075.178776] wlp3s0: deauthenticated from 5c:f4:ab:10:d2:bb (Reason: 16=GROUP_KEY_HANDSHAKE_TIMEOUT) > [209075.841872] wlp3s0: authenticate with 5c:f4:ab:10:d2:bb > [209075.845305] wlp3s0: send auth to 5c:f4:ab:10:d2:bb (try 1/3) > [209075.851186] wlp3s0: authenticated > [209075.852537] wlp3s0: associate with 5c:f4:ab:10:d2:bb (try 1/3) > [209075.855972] wlp3s0: RX AssocResp from 5c:f4:ab:10:d2:bb (capab=0x411 status=0 aid=1) > [209075.858522] wlp3s0: associated > [210159.723726] PM: suspend entry (deep) > [210159.741497] Filesystems sync: 0.017 seconds > [210159.743585] Freezing user space processes ... (elapsed 0.009 seconds) done. > [210159.753345] OOM killer disabled. > [210159.753349] Freezing remaining freezable tasks ... (elapsed 0.003 seconds) done. > [210159.757357] printk: Suspending console(s) (use no_console_suspend to debug) > [210159.945365] sd 2:0:0:0: [sdb] Synchronizing SCSI cache > [210159.945443] sd 0:0:0:0: [sda] Synchronizing SCSI cache > [210159.945651] sd 0:0:0:0: [sda] Stopping disk > [210159.947225] sd 2:0:0:0: [sdb] Stopping disk > [210160.019791] wlp3s0: deauthenticating from 5c:f4:ab:10:d2:bb by local choice (Reason: 3=DEAUTH_LEAVING) > [210160.021158] e1000e: EEE TX LPI TIMER: 00000011 > [210161.245106] PM: suspend devices took 1.488 seconds > [210161.266601] ACPI: EC: interrupt blocked > [210161.305431] ACPI: Preparing to enter system sleep state S3 > [210161.313532] ACPI: EC: event blocked > [210161.313535] ACPI: EC: EC stopped > [210161.313537] PM: Saving platform NVS memory > [210161.313548] Disabling non-boot CPUs ... > ... > [224698.957159] wlp3s0: associated > [229707.724067] wlp3s0: deauthenticated from 5c:f4:ab:10:d2:bb (Reason: 16=GROUP_KEY_HANDSHAKE_TIMEOUT) > [229708.370607] wlp3s0: authenticate with 5c:f4:ab:10:d2:bb > [229708.373732] wlp3s0: send auth to 5c:f4:ab:10:d2:bb (try 1/3) > [229708.376501] wlp3s0: authenticated > [229708.379997] wlp3s0: associate with 5c:f4:ab:10:d2:bb (try 1/3) > [229708.383773] wlp3s0: RX AssocResp from 5c:f4:ab:10:d2:bb (capab=0x411 status=0 aid=1) > [229708.386423] wlp3s0: associated > [229756.518759] i915 0000:00:02.0: [drm] Resetting chip for stopped heartbeat on rcs0 > [229756.622596] i915 0000:00:02.0: [drm] fgfs[2648] context reset due to GPU hang > > -- > http://www.livejournal.com/~pavelmachek _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2021-06-28 10:21 UTC|newest] Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-06-24 9:53 5.13-rc6 on thinkpad X220: graphics hangs with recent mainline Pavel Machek 2021-06-24 9:53 ` [Intel-gfx] " Pavel Machek 2021-06-28 10:21 ` Joonas Lahtinen [this message] 2021-06-28 10:21 ` Joonas Lahtinen 2021-08-18 6:47 ` Pavel Machek 2021-08-18 6:47 ` [Intel-gfx] " Pavel Machek
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=162487567602.6944.6736788493261786550@jlahtine-mobl.ger.corp.intel.com \ --to=joonas.lahtinen@linux.intel.com \ --cc=intel-gfx@lists.freedesktop.org \ --cc=jani.nikula@linux.intel.com \ --cc=linux-kernel@vger.kernel.org \ --cc=pavel@ucw.cz \ --cc=rodrigo.vivi@intel.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.