* [Bug 1877052] [NEW] KVM Win 10 guest pauses after kernel upgrade
@ 2020-05-06 7:58 Andreas Weller
2020-05-06 8:01 ` [Bug 1877052] " Andreas Weller
` (10 more replies)
0 siblings, 11 replies; 12+ messages in thread
From: Andreas Weller @ 2020-05-06 7:58 UTC (permalink / raw)
To: qemu-devel
Public bug reported:
Hello!
Unfortunately the bug has apparently reappeared. I have a Windows 10 running in a VM, which after my today's "apt upgrade" goes into pause mode after a few seconds of running time.
Until yesterday it used to work and I was able to boot the VM. During
the kernel update (from 5.4.0-28.33 to 5.4.0-29.34) the VM was active
and then went into pause mode. Even after a reboot of my host system the
problem still persists: the VM boots for a few seconds and then switches
to pause mode.
Current Kernel: Linux andreas-laptop 5.4.0-29-generic #33-Ubuntu SMP Wed
Apr 29 14:32:27 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
Maybe relevant logfile lines:
2020-05-06T07:46:42.857574Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(48FH).vmx-exit-load-perf-global-ctrl [bit 12]
2020-05-06T07:46:42.857718Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(490H).vmx-entry-load-perf-global-ctrl [bit 13]
2020-05-06T07:46:42.860567Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(48FH).vmx-exit-load-perf-global-ctrl [bit 12]
2020-05-06T07:46:42.860582Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(490H).vmx-entry-load-perf-global-ctrl [bit 13]
2020-05-06T07:47:22.901057Z qemu-system-x86_64: terminating on signal 15 from pid 1593 (/usr/sbin/libvirtd)
2020-05-06 07:47:23.101+0000: shutting down, reason=destroyed
Kind regards,
Andreas
** Affects: qemu
Importance: Undecided
Status: New
** Affects: qemu (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1877052
Title:
KVM Win 10 guest pauses after kernel upgrade
Status in QEMU:
New
Status in qemu package in Ubuntu:
New
Bug description:
Hello!
Unfortunately the bug has apparently reappeared. I have a Windows 10 running in a VM, which after my today's "apt upgrade" goes into pause mode after a few seconds of running time.
Until yesterday it used to work and I was able to boot the VM. During
the kernel update (from 5.4.0-28.33 to 5.4.0-29.34) the VM was active
and then went into pause mode. Even after a reboot of my host system
the problem still persists: the VM boots for a few seconds and then
switches to pause mode.
Current Kernel: Linux andreas-laptop 5.4.0-29-generic #33-Ubuntu SMP
Wed Apr 29 14:32:27 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
Maybe relevant logfile lines:
2020-05-06T07:46:42.857574Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(48FH).vmx-exit-load-perf-global-ctrl [bit 12]
2020-05-06T07:46:42.857718Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(490H).vmx-entry-load-perf-global-ctrl [bit 13]
2020-05-06T07:46:42.860567Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(48FH).vmx-exit-load-perf-global-ctrl [bit 12]
2020-05-06T07:46:42.860582Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(490H).vmx-entry-load-perf-global-ctrl [bit 13]
2020-05-06T07:47:22.901057Z qemu-system-x86_64: terminating on signal 15 from pid 1593 (/usr/sbin/libvirtd)
2020-05-06 07:47:23.101+0000: shutting down, reason=destroyed
Kind regards,
Andreas
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1877052/+subscriptions
^ permalink raw reply [flat|nested] 12+ messages in thread
* [Bug 1877052] Re: KVM Win 10 guest pauses after kernel upgrade
2020-05-06 7:58 [Bug 1877052] [NEW] KVM Win 10 guest pauses after kernel upgrade Andreas Weller
@ 2020-05-06 8:01 ` Andreas Weller
2020-05-06 8:02 ` Andreas Weller
` (9 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Andreas Weller @ 2020-05-06 8:01 UTC (permalink / raw)
To: qemu-devel
** Attachment added: "Libvirt Logfile"
https://bugs.launchpad.net/qemu/+bug/1877052/+attachment/5367244/+files/win10.log
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1877052
Title:
KVM Win 10 guest pauses after kernel upgrade
Status in QEMU:
New
Status in qemu package in Ubuntu:
New
Bug description:
Hello!
Unfortunately the bug has apparently reappeared. I have a Windows 10 running in a VM, which after my today's "apt upgrade" goes into pause mode after a few seconds of running time.
Until yesterday it used to work and I was able to boot the VM. During
the kernel update (from 5.4.0-28.33 to 5.4.0-29.34) the VM was active
and then went into pause mode. Even after a reboot of my host system
the problem still persists: the VM boots for a few seconds and then
switches to pause mode.
Current Kernel: Linux andreas-laptop 5.4.0-29-generic #33-Ubuntu SMP
Wed Apr 29 14:32:27 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
Maybe relevant logfile lines:
2020-05-06T07:46:42.857574Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(48FH).vmx-exit-load-perf-global-ctrl [bit 12]
2020-05-06T07:46:42.857718Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(490H).vmx-entry-load-perf-global-ctrl [bit 13]
2020-05-06T07:46:42.860567Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(48FH).vmx-exit-load-perf-global-ctrl [bit 12]
2020-05-06T07:46:42.860582Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(490H).vmx-entry-load-perf-global-ctrl [bit 13]
2020-05-06T07:47:22.901057Z qemu-system-x86_64: terminating on signal 15 from pid 1593 (/usr/sbin/libvirtd)
2020-05-06 07:47:23.101+0000: shutting down, reason=destroyed
Kind regards,
Andreas
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1877052/+subscriptions
^ permalink raw reply [flat|nested] 12+ messages in thread
* [Bug 1877052] Re: KVM Win 10 guest pauses after kernel upgrade
2020-05-06 7:58 [Bug 1877052] [NEW] KVM Win 10 guest pauses after kernel upgrade Andreas Weller
2020-05-06 8:01 ` [Bug 1877052] " Andreas Weller
@ 2020-05-06 8:02 ` Andreas Weller
2020-05-06 8:04 ` Andreas Weller
` (8 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Andreas Weller @ 2020-05-06 8:02 UTC (permalink / raw)
To: qemu-devel
** Attachment added: "History.log from apt"
https://bugs.launchpad.net/qemu/+bug/1877052/+attachment/5367245/+files/history.log
** Description changed:
-
Hello!
Unfortunately the bug has apparently reappeared. I have a Windows 10 running in a VM, which after my today's "apt upgrade" goes into pause mode after a few seconds of running time.
Until yesterday it used to work and I was able to boot the VM. During
the kernel update (from 5.4.0-28.33 to 5.4.0-29.34) the VM was active
and then went into pause mode. Even after a reboot of my host system the
problem still persists: the VM boots for a few seconds and then switches
to pause mode.
+ Current Kernel: Linux andreas-laptop 5.4.0-29-generic #33-Ubuntu SMP Wed
+ Apr 29 14:32:27 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
+
Kind regards,
- Andreas
+ Andreas
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1877052
Title:
KVM Win 10 guest pauses after kernel upgrade
Status in QEMU:
New
Status in qemu package in Ubuntu:
New
Bug description:
Hello!
Unfortunately the bug has apparently reappeared. I have a Windows 10 running in a VM, which after my today's "apt upgrade" goes into pause mode after a few seconds of running time.
Until yesterday it used to work and I was able to boot the VM. During
the kernel update (from 5.4.0-28.33 to 5.4.0-29.34) the VM was active
and then went into pause mode. Even after a reboot of my host system
the problem still persists: the VM boots for a few seconds and then
switches to pause mode.
Current Kernel: Linux andreas-laptop 5.4.0-29-generic #33-Ubuntu SMP
Wed Apr 29 14:32:27 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
Maybe relevant logfile lines:
2020-05-06T07:46:42.857574Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(48FH).vmx-exit-load-perf-global-ctrl [bit 12]
2020-05-06T07:46:42.857718Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(490H).vmx-entry-load-perf-global-ctrl [bit 13]
2020-05-06T07:46:42.860567Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(48FH).vmx-exit-load-perf-global-ctrl [bit 12]
2020-05-06T07:46:42.860582Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(490H).vmx-entry-load-perf-global-ctrl [bit 13]
2020-05-06T07:47:22.901057Z qemu-system-x86_64: terminating on signal 15 from pid 1593 (/usr/sbin/libvirtd)
2020-05-06 07:47:23.101+0000: shutting down, reason=destroyed
Kind regards,
Andreas
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1877052/+subscriptions
^ permalink raw reply [flat|nested] 12+ messages in thread
* [Bug 1877052] Re: KVM Win 10 guest pauses after kernel upgrade
2020-05-06 7:58 [Bug 1877052] [NEW] KVM Win 10 guest pauses after kernel upgrade Andreas Weller
2020-05-06 8:01 ` [Bug 1877052] " Andreas Weller
2020-05-06 8:02 ` Andreas Weller
@ 2020-05-06 8:04 ` Andreas Weller
2020-05-06 8:09 ` Andreas Weller
` (7 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Andreas Weller @ 2020-05-06 8:04 UTC (permalink / raw)
To: qemu-devel
** Attachment added: "Dpkg -l Output"
https://bugs.launchpad.net/qemu/+bug/1877052/+attachment/5367247/+files/dpkg-list.txt
** Description changed:
Hello!
Unfortunately the bug has apparently reappeared. I have a Windows 10 running in a VM, which after my today's "apt upgrade" goes into pause mode after a few seconds of running time.
Until yesterday it used to work and I was able to boot the VM. During
the kernel update (from 5.4.0-28.33 to 5.4.0-29.34) the VM was active
and then went into pause mode. Even after a reboot of my host system the
problem still persists: the VM boots for a few seconds and then switches
to pause mode.
Current Kernel: Linux andreas-laptop 5.4.0-29-generic #33-Ubuntu SMP Wed
Apr 29 14:32:27 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
+ Maybe relevant logfile lines:
+ 2020-05-06T07:46:42.857574Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(48FH).vmx-exit-load-perf-global-ctrl [bit 12]
+ 2020-05-06T07:46:42.857718Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(490H).vmx-entry-load-perf-global-ctrl [bit 13]
+ 2020-05-06T07:46:42.860567Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(48FH).vmx-exit-load-perf-global-ctrl [bit 12]
+ 2020-05-06T07:46:42.860582Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(490H).vmx-entry-load-perf-global-ctrl [bit 13]
+ 2020-05-06T07:47:22.901057Z qemu-system-x86_64: terminating on signal 15 from pid 1593 (/usr/sbin/libvirtd)
+ 2020-05-06 07:47:23.101+0000: shutting down, reason=destroyed
+
Kind regards,
Andreas
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1877052
Title:
KVM Win 10 guest pauses after kernel upgrade
Status in QEMU:
New
Status in qemu package in Ubuntu:
New
Bug description:
Hello!
Unfortunately the bug has apparently reappeared. I have a Windows 10 running in a VM, which after my today's "apt upgrade" goes into pause mode after a few seconds of running time.
Until yesterday it used to work and I was able to boot the VM. During
the kernel update (from 5.4.0-28.33 to 5.4.0-29.34) the VM was active
and then went into pause mode. Even after a reboot of my host system
the problem still persists: the VM boots for a few seconds and then
switches to pause mode.
Current Kernel: Linux andreas-laptop 5.4.0-29-generic #33-Ubuntu SMP
Wed Apr 29 14:32:27 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
Maybe relevant logfile lines:
2020-05-06T07:46:42.857574Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(48FH).vmx-exit-load-perf-global-ctrl [bit 12]
2020-05-06T07:46:42.857718Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(490H).vmx-entry-load-perf-global-ctrl [bit 13]
2020-05-06T07:46:42.860567Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(48FH).vmx-exit-load-perf-global-ctrl [bit 12]
2020-05-06T07:46:42.860582Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(490H).vmx-entry-load-perf-global-ctrl [bit 13]
2020-05-06T07:47:22.901057Z qemu-system-x86_64: terminating on signal 15 from pid 1593 (/usr/sbin/libvirtd)
2020-05-06 07:47:23.101+0000: shutting down, reason=destroyed
Kind regards,
Andreas
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1877052/+subscriptions
^ permalink raw reply [flat|nested] 12+ messages in thread
* [Bug 1877052] Re: KVM Win 10 guest pauses after kernel upgrade
2020-05-06 7:58 [Bug 1877052] [NEW] KVM Win 10 guest pauses after kernel upgrade Andreas Weller
` (2 preceding siblings ...)
2020-05-06 8:04 ` Andreas Weller
@ 2020-05-06 8:09 ` Andreas Weller
2020-05-06 12:34 ` Christian Ehrhardt
` (6 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Andreas Weller @ 2020-05-06 8:09 UTC (permalink / raw)
To: qemu-devel
** Attachment added: "VM's XML configuration file"
https://bugs.launchpad.net/qemu/+bug/1877052/+attachment/5367249/+files/win10.xml
** Also affects: qemu (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1877052
Title:
KVM Win 10 guest pauses after kernel upgrade
Status in QEMU:
New
Status in qemu package in Ubuntu:
New
Bug description:
Hello!
Unfortunately the bug has apparently reappeared. I have a Windows 10 running in a VM, which after my today's "apt upgrade" goes into pause mode after a few seconds of running time.
Until yesterday it used to work and I was able to boot the VM. During
the kernel update (from 5.4.0-28.33 to 5.4.0-29.34) the VM was active
and then went into pause mode. Even after a reboot of my host system
the problem still persists: the VM boots for a few seconds and then
switches to pause mode.
Current Kernel: Linux andreas-laptop 5.4.0-29-generic #33-Ubuntu SMP
Wed Apr 29 14:32:27 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
Maybe relevant logfile lines:
2020-05-06T07:46:42.857574Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(48FH).vmx-exit-load-perf-global-ctrl [bit 12]
2020-05-06T07:46:42.857718Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(490H).vmx-entry-load-perf-global-ctrl [bit 13]
2020-05-06T07:46:42.860567Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(48FH).vmx-exit-load-perf-global-ctrl [bit 12]
2020-05-06T07:46:42.860582Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(490H).vmx-entry-load-perf-global-ctrl [bit 13]
2020-05-06T07:47:22.901057Z qemu-system-x86_64: terminating on signal 15 from pid 1593 (/usr/sbin/libvirtd)
2020-05-06 07:47:23.101+0000: shutting down, reason=destroyed
Kind regards,
Andreas
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1877052/+subscriptions
^ permalink raw reply [flat|nested] 12+ messages in thread
* [Bug 1877052] Re: KVM Win 10 guest pauses after kernel upgrade
2020-05-06 7:58 [Bug 1877052] [NEW] KVM Win 10 guest pauses after kernel upgrade Andreas Weller
` (3 preceding siblings ...)
2020-05-06 8:09 ` Andreas Weller
@ 2020-05-06 12:34 ` Christian Ehrhardt
2020-05-28 11:58 ` Christian Ehrhardt
` (5 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Christian Ehrhardt @ 2020-05-06 12:34 UTC (permalink / raw)
To: qemu-devel
Note: might be related (or not) to bug 1866870
Let's analyze as independent and dup if it turns out to be a dup.
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1877052
Title:
KVM Win 10 guest pauses after kernel upgrade
Status in QEMU:
New
Status in qemu package in Ubuntu:
New
Bug description:
Hello!
Unfortunately the bug has apparently reappeared. I have a Windows 10 running in a VM, which after my today's "apt upgrade" goes into pause mode after a few seconds of running time.
Until yesterday it used to work and I was able to boot the VM. During
the kernel update (from 5.4.0-28.33 to 5.4.0-29.34) the VM was active
and then went into pause mode. Even after a reboot of my host system
the problem still persists: the VM boots for a few seconds and then
switches to pause mode.
Current Kernel: Linux andreas-laptop 5.4.0-29-generic #33-Ubuntu SMP
Wed Apr 29 14:32:27 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
Maybe relevant logfile lines:
2020-05-06T07:46:42.857574Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(48FH).vmx-exit-load-perf-global-ctrl [bit 12]
2020-05-06T07:46:42.857718Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(490H).vmx-entry-load-perf-global-ctrl [bit 13]
2020-05-06T07:46:42.860567Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(48FH).vmx-exit-load-perf-global-ctrl [bit 12]
2020-05-06T07:46:42.860582Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(490H).vmx-entry-load-perf-global-ctrl [bit 13]
2020-05-06T07:47:22.901057Z qemu-system-x86_64: terminating on signal 15 from pid 1593 (/usr/sbin/libvirtd)
2020-05-06 07:47:23.101+0000: shutting down, reason=destroyed
Kind regards,
Andreas
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1877052/+subscriptions
^ permalink raw reply [flat|nested] 12+ messages in thread
* [Bug 1877052] Re: KVM Win 10 guest pauses after kernel upgrade
2020-05-06 7:58 [Bug 1877052] [NEW] KVM Win 10 guest pauses after kernel upgrade Andreas Weller
` (4 preceding siblings ...)
2020-05-06 12:34 ` Christian Ehrhardt
@ 2020-05-28 11:58 ` Christian Ehrhardt
2020-05-28 11:59 ` Christian Ehrhardt
` (4 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Christian Ehrhardt @ 2020-05-28 11:58 UTC (permalink / raw)
To: qemu-devel
The warnings in the report like "MSR(48FH).vmx-exit-load-perf-global-ctrl" are unrelated (in regard to guest hang).
Those happen on
a) too old kernels that don't support the feature
b) mismatch of expectations of a chips vs its actual capabilities
E.g. if libvirt thinks a feature should be supported by a chip, but isn't.
There are toomany SKUs out there to be perfect - so these are red-herrings at best.
I have not seen similar reports recently nor anyone else chiming in on this one.
After loosing what e thought could be a track to the bgu I'm puzzled what to do now on this?
@Andreas - did you in the meantime find any new insight on this?
** Changed in: qemu (Ubuntu)
Status: New => Incomplete
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1877052
Title:
KVM Win 10 guest pauses after kernel upgrade
Status in QEMU:
New
Status in qemu package in Ubuntu:
Incomplete
Bug description:
Hello!
Unfortunately the bug has apparently reappeared. I have a Windows 10 running in a VM, which after my today's "apt upgrade" goes into pause mode after a few seconds of running time.
Until yesterday it used to work and I was able to boot the VM. During
the kernel update (from 5.4.0-28.33 to 5.4.0-29.34) the VM was active
and then went into pause mode. Even after a reboot of my host system
the problem still persists: the VM boots for a few seconds and then
switches to pause mode.
Current Kernel: Linux andreas-laptop 5.4.0-29-generic #33-Ubuntu SMP
Wed Apr 29 14:32:27 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
Maybe relevant logfile lines:
2020-05-06T07:46:42.857574Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(48FH).vmx-exit-load-perf-global-ctrl [bit 12]
2020-05-06T07:46:42.857718Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(490H).vmx-entry-load-perf-global-ctrl [bit 13]
2020-05-06T07:46:42.860567Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(48FH).vmx-exit-load-perf-global-ctrl [bit 12]
2020-05-06T07:46:42.860582Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(490H).vmx-entry-load-perf-global-ctrl [bit 13]
2020-05-06T07:47:22.901057Z qemu-system-x86_64: terminating on signal 15 from pid 1593 (/usr/sbin/libvirtd)
2020-05-06 07:47:23.101+0000: shutting down, reason=destroyed
Kind regards,
Andreas
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1877052/+subscriptions
^ permalink raw reply [flat|nested] 12+ messages in thread
* [Bug 1877052] Re: KVM Win 10 guest pauses after kernel upgrade
2020-05-06 7:58 [Bug 1877052] [NEW] KVM Win 10 guest pauses after kernel upgrade Andreas Weller
` (5 preceding siblings ...)
2020-05-28 11:58 ` Christian Ehrhardt
@ 2020-05-28 11:59 ` Christian Ehrhardt
2020-08-10 6:08 ` Christian Ehrhardt
` (3 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Christian Ehrhardt @ 2020-05-28 11:59 UTC (permalink / raw)
To: qemu-devel
@Andreas - If we find nothing else to try I'll ping you when I have a
newer qemu&libvirt build for Ubuntu 20.10 for you to try.
** Tags added: qemu-20.10
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1877052
Title:
KVM Win 10 guest pauses after kernel upgrade
Status in QEMU:
New
Status in qemu package in Ubuntu:
Incomplete
Bug description:
Hello!
Unfortunately the bug has apparently reappeared. I have a Windows 10 running in a VM, which after my today's "apt upgrade" goes into pause mode after a few seconds of running time.
Until yesterday it used to work and I was able to boot the VM. During
the kernel update (from 5.4.0-28.33 to 5.4.0-29.34) the VM was active
and then went into pause mode. Even after a reboot of my host system
the problem still persists: the VM boots for a few seconds and then
switches to pause mode.
Current Kernel: Linux andreas-laptop 5.4.0-29-generic #33-Ubuntu SMP
Wed Apr 29 14:32:27 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
Maybe relevant logfile lines:
2020-05-06T07:46:42.857574Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(48FH).vmx-exit-load-perf-global-ctrl [bit 12]
2020-05-06T07:46:42.857718Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(490H).vmx-entry-load-perf-global-ctrl [bit 13]
2020-05-06T07:46:42.860567Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(48FH).vmx-exit-load-perf-global-ctrl [bit 12]
2020-05-06T07:46:42.860582Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(490H).vmx-entry-load-perf-global-ctrl [bit 13]
2020-05-06T07:47:22.901057Z qemu-system-x86_64: terminating on signal 15 from pid 1593 (/usr/sbin/libvirtd)
2020-05-06 07:47:23.101+0000: shutting down, reason=destroyed
Kind regards,
Andreas
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1877052/+subscriptions
^ permalink raw reply [flat|nested] 12+ messages in thread
* [Bug 1877052] Re: KVM Win 10 guest pauses after kernel upgrade
2020-05-06 7:58 [Bug 1877052] [NEW] KVM Win 10 guest pauses after kernel upgrade Andreas Weller
` (6 preceding siblings ...)
2020-05-28 11:59 ` Christian Ehrhardt
@ 2020-08-10 6:08 ` Christian Ehrhardt
2021-05-06 13:32 ` Thomas Huth
` (2 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Christian Ehrhardt @ 2020-08-10 6:08 UTC (permalink / raw)
To: qemu-devel
I haven't seen any similar reports nor any updates here.
Might I ask if you have got any further since then?
Qemu 5.0 is available in Ubuntu 20.10 now, if you are willing to upgrade or install a test system that might be worth a try (new libvirt is still WIP, but unlikely to play a role here).
20.10 proposed would even have a 5.8.0.12.14 kernel since a kernel change might have been what started this that might be worth a check as well.
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1877052
Title:
KVM Win 10 guest pauses after kernel upgrade
Status in QEMU:
New
Status in qemu package in Ubuntu:
Incomplete
Bug description:
Hello!
Unfortunately the bug has apparently reappeared. I have a Windows 10 running in a VM, which after my today's "apt upgrade" goes into pause mode after a few seconds of running time.
Until yesterday it used to work and I was able to boot the VM. During
the kernel update (from 5.4.0-28.33 to 5.4.0-29.34) the VM was active
and then went into pause mode. Even after a reboot of my host system
the problem still persists: the VM boots for a few seconds and then
switches to pause mode.
Current Kernel: Linux andreas-laptop 5.4.0-29-generic #33-Ubuntu SMP
Wed Apr 29 14:32:27 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
Maybe relevant logfile lines:
2020-05-06T07:46:42.857574Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(48FH).vmx-exit-load-perf-global-ctrl [bit 12]
2020-05-06T07:46:42.857718Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(490H).vmx-entry-load-perf-global-ctrl [bit 13]
2020-05-06T07:46:42.860567Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(48FH).vmx-exit-load-perf-global-ctrl [bit 12]
2020-05-06T07:46:42.860582Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(490H).vmx-entry-load-perf-global-ctrl [bit 13]
2020-05-06T07:47:22.901057Z qemu-system-x86_64: terminating on signal 15 from pid 1593 (/usr/sbin/libvirtd)
2020-05-06 07:47:23.101+0000: shutting down, reason=destroyed
Kind regards,
Andreas
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1877052/+subscriptions
^ permalink raw reply [flat|nested] 12+ messages in thread
* [Bug 1877052] Re: KVM Win 10 guest pauses after kernel upgrade
2020-05-06 7:58 [Bug 1877052] [NEW] KVM Win 10 guest pauses after kernel upgrade Andreas Weller
` (7 preceding siblings ...)
2020-08-10 6:08 ` Christian Ehrhardt
@ 2021-05-06 13:32 ` Thomas Huth
2021-07-06 4:17 ` Launchpad Bug Tracker
2021-07-06 4:17 ` Launchpad Bug Tracker
10 siblings, 0 replies; 12+ messages in thread
From: Thomas Huth @ 2021-05-06 13:32 UTC (permalink / raw)
To: qemu-devel
** Changed in: qemu
Status: New => Incomplete
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1877052
Title:
KVM Win 10 guest pauses after kernel upgrade
Status in QEMU:
Incomplete
Status in qemu package in Ubuntu:
Incomplete
Bug description:
Hello!
Unfortunately the bug has apparently reappeared. I have a Windows 10 running in a VM, which after my today's "apt upgrade" goes into pause mode after a few seconds of running time.
Until yesterday it used to work and I was able to boot the VM. During
the kernel update (from 5.4.0-28.33 to 5.4.0-29.34) the VM was active
and then went into pause mode. Even after a reboot of my host system
the problem still persists: the VM boots for a few seconds and then
switches to pause mode.
Current Kernel: Linux andreas-laptop 5.4.0-29-generic #33-Ubuntu SMP
Wed Apr 29 14:32:27 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
Maybe relevant logfile lines:
2020-05-06T07:46:42.857574Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(48FH).vmx-exit-load-perf-global-ctrl [bit 12]
2020-05-06T07:46:42.857718Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(490H).vmx-entry-load-perf-global-ctrl [bit 13]
2020-05-06T07:46:42.860567Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(48FH).vmx-exit-load-perf-global-ctrl [bit 12]
2020-05-06T07:46:42.860582Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(490H).vmx-entry-load-perf-global-ctrl [bit 13]
2020-05-06T07:47:22.901057Z qemu-system-x86_64: terminating on signal 15 from pid 1593 (/usr/sbin/libvirtd)
2020-05-06 07:47:23.101+0000: shutting down, reason=destroyed
Kind regards,
Andreas
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1877052/+subscriptions
^ permalink raw reply [flat|nested] 12+ messages in thread
* [Bug 1877052] Re: KVM Win 10 guest pauses after kernel upgrade
2020-05-06 7:58 [Bug 1877052] [NEW] KVM Win 10 guest pauses after kernel upgrade Andreas Weller
` (8 preceding siblings ...)
2021-05-06 13:32 ` Thomas Huth
@ 2021-07-06 4:17 ` Launchpad Bug Tracker
2021-07-06 4:17 ` Launchpad Bug Tracker
10 siblings, 0 replies; 12+ messages in thread
From: Launchpad Bug Tracker @ 2021-07-06 4:17 UTC (permalink / raw)
To: qemu-devel
[Expired for QEMU because there has been no activity for 60 days.]
** Changed in: qemu
Status: Incomplete => Expired
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1877052
Title:
KVM Win 10 guest pauses after kernel upgrade
Status in QEMU:
Expired
Status in qemu package in Ubuntu:
Expired
Bug description:
Hello!
Unfortunately the bug has apparently reappeared. I have a Windows 10 running in a VM, which after my today's "apt upgrade" goes into pause mode after a few seconds of running time.
Until yesterday it used to work and I was able to boot the VM. During
the kernel update (from 5.4.0-28.33 to 5.4.0-29.34) the VM was active
and then went into pause mode. Even after a reboot of my host system
the problem still persists: the VM boots for a few seconds and then
switches to pause mode.
Current Kernel: Linux andreas-laptop 5.4.0-29-generic #33-Ubuntu SMP
Wed Apr 29 14:32:27 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
Maybe relevant logfile lines:
2020-05-06T07:46:42.857574Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(48FH).vmx-exit-load-perf-global-ctrl [bit 12]
2020-05-06T07:46:42.857718Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(490H).vmx-entry-load-perf-global-ctrl [bit 13]
2020-05-06T07:46:42.860567Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(48FH).vmx-exit-load-perf-global-ctrl [bit 12]
2020-05-06T07:46:42.860582Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(490H).vmx-entry-load-perf-global-ctrl [bit 13]
2020-05-06T07:47:22.901057Z qemu-system-x86_64: terminating on signal 15 from pid 1593 (/usr/sbin/libvirtd)
2020-05-06 07:47:23.101+0000: shutting down, reason=destroyed
Kind regards,
Andreas
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1877052/+subscriptions
^ permalink raw reply [flat|nested] 12+ messages in thread
* [Bug 1877052] Re: KVM Win 10 guest pauses after kernel upgrade
2020-05-06 7:58 [Bug 1877052] [NEW] KVM Win 10 guest pauses after kernel upgrade Andreas Weller
` (9 preceding siblings ...)
2021-07-06 4:17 ` Launchpad Bug Tracker
@ 2021-07-06 4:17 ` Launchpad Bug Tracker
10 siblings, 0 replies; 12+ messages in thread
From: Launchpad Bug Tracker @ 2021-07-06 4:17 UTC (permalink / raw)
To: qemu-devel
[Expired for qemu (Ubuntu) because there has been no activity for 60
days.]
** Changed in: qemu (Ubuntu)
Status: Incomplete => Expired
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1877052
Title:
KVM Win 10 guest pauses after kernel upgrade
Status in QEMU:
Expired
Status in qemu package in Ubuntu:
Expired
Bug description:
Hello!
Unfortunately the bug has apparently reappeared. I have a Windows 10 running in a VM, which after my today's "apt upgrade" goes into pause mode after a few seconds of running time.
Until yesterday it used to work and I was able to boot the VM. During
the kernel update (from 5.4.0-28.33 to 5.4.0-29.34) the VM was active
and then went into pause mode. Even after a reboot of my host system
the problem still persists: the VM boots for a few seconds and then
switches to pause mode.
Current Kernel: Linux andreas-laptop 5.4.0-29-generic #33-Ubuntu SMP
Wed Apr 29 14:32:27 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
Maybe relevant logfile lines:
2020-05-06T07:46:42.857574Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(48FH).vmx-exit-load-perf-global-ctrl [bit 12]
2020-05-06T07:46:42.857718Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(490H).vmx-entry-load-perf-global-ctrl [bit 13]
2020-05-06T07:46:42.860567Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(48FH).vmx-exit-load-perf-global-ctrl [bit 12]
2020-05-06T07:46:42.860582Z qemu-system-x86_64: warning: host doesn't support requested feature: MSR(490H).vmx-entry-load-perf-global-ctrl [bit 13]
2020-05-06T07:47:22.901057Z qemu-system-x86_64: terminating on signal 15 from pid 1593 (/usr/sbin/libvirtd)
2020-05-06 07:47:23.101+0000: shutting down, reason=destroyed
Kind regards,
Andreas
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1877052/+subscriptions
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2021-07-06 4:37 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-05-06 7:58 [Bug 1877052] [NEW] KVM Win 10 guest pauses after kernel upgrade Andreas Weller
2020-05-06 8:01 ` [Bug 1877052] " Andreas Weller
2020-05-06 8:02 ` Andreas Weller
2020-05-06 8:04 ` Andreas Weller
2020-05-06 8:09 ` Andreas Weller
2020-05-06 12:34 ` Christian Ehrhardt
2020-05-28 11:58 ` Christian Ehrhardt
2020-05-28 11:59 ` Christian Ehrhardt
2020-08-10 6:08 ` Christian Ehrhardt
2021-05-06 13:32 ` Thomas Huth
2021-07-06 4:17 ` Launchpad Bug Tracker
2021-07-06 4:17 ` Launchpad Bug Tracker
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.