* [PATCH] mhi: pci_generic: Fix inbound IPCR channel
@ 2021-07-08 9:32 Loic Poulain
2021-07-08 17:37 ` Hemant Kumar
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Loic Poulain @ 2021-07-08 9:32 UTC (permalink / raw)
To: mani, hemantk; +Cc: linux-arm-msm, Loic Poulain, stable
The qrtr-mhi client driver assumes that inbound buffers are
automatically allocated and queued by the MHI core, but this
no happens for mhi pci devices since IPCR inbound channel is
not flagged with auto_queue, causing unusable IPCR (qrtr)
feature. Fix that.
Cc: stable@vger.kernel.org
Fixes: 855a70c12021 ("bus: mhi: Add MHI PCI support for WWAN modems")
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
---
drivers/bus/mhi/pci_generic.c | 18 +++++++++++++++++-
1 file changed, 17 insertions(+), 1 deletion(-)
diff --git a/drivers/bus/mhi/pci_generic.c b/drivers/bus/mhi/pci_generic.c
index 8bc6149..6d2ddec 100644
--- a/drivers/bus/mhi/pci_generic.c
+++ b/drivers/bus/mhi/pci_generic.c
@@ -75,6 +75,22 @@ struct mhi_pci_dev_info {
.doorbell_mode_switch = false, \
}
+#define MHI_CHANNEL_CONFIG_DL_AUTOQUEUE(ch_num, ch_name, el_count, ev_ring) \
+ { \
+ .num = ch_num, \
+ .name = ch_name, \
+ .num_elements = el_count, \
+ .event_ring = ev_ring, \
+ .dir = DMA_FROM_DEVICE, \
+ .ee_mask = BIT(MHI_EE_AMSS), \
+ .pollcfg = 0, \
+ .doorbell = MHI_DB_BRST_DISABLE, \
+ .lpm_notify = false, \
+ .offload_channel = false, \
+ .doorbell_mode_switch = false, \
+ .auto_queue = true, \
+ }
+
#define MHI_EVENT_CONFIG_CTRL(ev_ring, el_count) \
{ \
.num_elements = el_count, \
@@ -213,7 +229,7 @@ static const struct mhi_channel_config modem_qcom_v1_mhi_channels[] = {
MHI_CHANNEL_CONFIG_UL(14, "QMI", 4, 0),
MHI_CHANNEL_CONFIG_DL(15, "QMI", 4, 0),
MHI_CHANNEL_CONFIG_UL(20, "IPCR", 8, 0),
- MHI_CHANNEL_CONFIG_DL(21, "IPCR", 8, 0),
+ MHI_CHANNEL_CONFIG_DL_AUTOQUEUE(21, "IPCR", 8, 0),
MHI_CHANNEL_CONFIG_UL_FP(34, "FIREHOSE", 32, 0),
MHI_CHANNEL_CONFIG_DL_FP(35, "FIREHOSE", 32, 0),
MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0", 128, 2),
--
2.7.4
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [PATCH] mhi: pci_generic: Fix inbound IPCR channel
2021-07-08 9:32 [PATCH] mhi: pci_generic: Fix inbound IPCR channel Loic Poulain
@ 2021-07-08 17:37 ` Hemant Kumar
2021-07-08 19:54 ` Bhaumik Bhatt
2021-07-16 7:21 ` Manivannan Sadhasivam
2 siblings, 0 replies; 4+ messages in thread
From: Hemant Kumar @ 2021-07-08 17:37 UTC (permalink / raw)
To: Loic Poulain, mani; +Cc: linux-arm-msm, stable
On Thu, 2021-07-08 at 11:32 +0200, Loic Poulain wrote:
> The qrtr-mhi client driver assumes that inbound buffers are
> automatically allocated and queued by the MHI core, but this
> no happens for mhi pci devices since IPCR inbound channel is
does not happen for mhi pci devices since IPCR inbound channel is
> not flagged with auto_queue, causing unusable IPCR (qrtr)
> feature. Fix that.
>
> Cc: stable@vger.kernel.org
> Fixes: 855a70c12021 ("bus: mhi: Add MHI PCI support for WWAN modems")
> Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
> ---
With commit text update
Reviewed-by: Hemant kumar <hemantk@codeaurora.org>
> [..]
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH] mhi: pci_generic: Fix inbound IPCR channel
2021-07-08 9:32 [PATCH] mhi: pci_generic: Fix inbound IPCR channel Loic Poulain
2021-07-08 17:37 ` Hemant Kumar
@ 2021-07-08 19:54 ` Bhaumik Bhatt
2021-07-16 7:21 ` Manivannan Sadhasivam
2 siblings, 0 replies; 4+ messages in thread
From: Bhaumik Bhatt @ 2021-07-08 19:54 UTC (permalink / raw)
To: Loic Poulain; +Cc: mani, hemantk, linux-arm-msm, stable
On 2021-07-08 02:32 AM, Loic Poulain wrote:
> The qrtr-mhi client driver assumes that inbound buffers are
> automatically allocated and queued by the MHI core, but this
> no happens for mhi pci devices since IPCR inbound channel is
> not flagged with auto_queue, causing unusable IPCR (qrtr)
> feature. Fix that.
>
> Cc: stable@vger.kernel.org
> Fixes: 855a70c12021 ("bus: mhi: Add MHI PCI support for WWAN modems")
> Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
> ---
> drivers/bus/mhi/pci_generic.c | 18 +++++++++++++++++-
> 1 file changed, 17 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/bus/mhi/pci_generic.c
> b/drivers/bus/mhi/pci_generic.c
> index 8bc6149..6d2ddec 100644
> --- a/drivers/bus/mhi/pci_generic.c
> +++ b/drivers/bus/mhi/pci_generic.c
> @@ -75,6 +75,22 @@ struct mhi_pci_dev_info {
> .doorbell_mode_switch = false, \
> }
>
> +#define MHI_CHANNEL_CONFIG_DL_AUTOQUEUE(ch_num, ch_name, el_count,
> ev_ring) \
> + { \
> + .num = ch_num, \
> + .name = ch_name, \
> + .num_elements = el_count, \
> + .event_ring = ev_ring, \
> + .dir = DMA_FROM_DEVICE, \
> + .ee_mask = BIT(MHI_EE_AMSS), \
> + .pollcfg = 0, \
> + .doorbell = MHI_DB_BRST_DISABLE, \
> + .lpm_notify = false, \
> + .offload_channel = false, \
> + .doorbell_mode_switch = false, \
> + .auto_queue = true, \
> + }
> +
> #define MHI_EVENT_CONFIG_CTRL(ev_ring, el_count) \
> { \
> .num_elements = el_count, \
> @@ -213,7 +229,7 @@ static const struct mhi_channel_config
> modem_qcom_v1_mhi_channels[] = {
> MHI_CHANNEL_CONFIG_UL(14, "QMI", 4, 0),
> MHI_CHANNEL_CONFIG_DL(15, "QMI", 4, 0),
> MHI_CHANNEL_CONFIG_UL(20, "IPCR", 8, 0),
> - MHI_CHANNEL_CONFIG_DL(21, "IPCR", 8, 0),
> + MHI_CHANNEL_CONFIG_DL_AUTOQUEUE(21, "IPCR", 8, 0),
> MHI_CHANNEL_CONFIG_UL_FP(34, "FIREHOSE", 32, 0),
> MHI_CHANNEL_CONFIG_DL_FP(35, "FIREHOSE", 32, 0),
> MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0", 128, 2),
Why do we need to make this change when we have your new change being
picked up that does this from qrtr/mhi.c?
Thanks,
Bhaumik
---
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora
Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH] mhi: pci_generic: Fix inbound IPCR channel
2021-07-08 9:32 [PATCH] mhi: pci_generic: Fix inbound IPCR channel Loic Poulain
2021-07-08 17:37 ` Hemant Kumar
2021-07-08 19:54 ` Bhaumik Bhatt
@ 2021-07-16 7:21 ` Manivannan Sadhasivam
2 siblings, 0 replies; 4+ messages in thread
From: Manivannan Sadhasivam @ 2021-07-16 7:21 UTC (permalink / raw)
To: Loic Poulain; +Cc: hemantk, linux-arm-msm, stable
On Thu, Jul 08, 2021 at 11:32:29AM +0200, Loic Poulain wrote:
> The qrtr-mhi client driver assumes that inbound buffers are
> automatically allocated and queued by the MHI core, but this
> no happens for mhi pci devices since IPCR inbound channel is
> not flagged with auto_queue, causing unusable IPCR (qrtr)
> feature. Fix that.
>
> Cc: stable@vger.kernel.org
> Fixes: 855a70c12021 ("bus: mhi: Add MHI PCI support for WWAN modems")
> Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Thanks,
Mani
> ---
> drivers/bus/mhi/pci_generic.c | 18 +++++++++++++++++-
> 1 file changed, 17 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/bus/mhi/pci_generic.c b/drivers/bus/mhi/pci_generic.c
> index 8bc6149..6d2ddec 100644
> --- a/drivers/bus/mhi/pci_generic.c
> +++ b/drivers/bus/mhi/pci_generic.c
> @@ -75,6 +75,22 @@ struct mhi_pci_dev_info {
> .doorbell_mode_switch = false, \
> }
>
> +#define MHI_CHANNEL_CONFIG_DL_AUTOQUEUE(ch_num, ch_name, el_count, ev_ring) \
> + { \
> + .num = ch_num, \
> + .name = ch_name, \
> + .num_elements = el_count, \
> + .event_ring = ev_ring, \
> + .dir = DMA_FROM_DEVICE, \
> + .ee_mask = BIT(MHI_EE_AMSS), \
> + .pollcfg = 0, \
> + .doorbell = MHI_DB_BRST_DISABLE, \
> + .lpm_notify = false, \
> + .offload_channel = false, \
> + .doorbell_mode_switch = false, \
> + .auto_queue = true, \
> + }
> +
> #define MHI_EVENT_CONFIG_CTRL(ev_ring, el_count) \
> { \
> .num_elements = el_count, \
> @@ -213,7 +229,7 @@ static const struct mhi_channel_config modem_qcom_v1_mhi_channels[] = {
> MHI_CHANNEL_CONFIG_UL(14, "QMI", 4, 0),
> MHI_CHANNEL_CONFIG_DL(15, "QMI", 4, 0),
> MHI_CHANNEL_CONFIG_UL(20, "IPCR", 8, 0),
> - MHI_CHANNEL_CONFIG_DL(21, "IPCR", 8, 0),
> + MHI_CHANNEL_CONFIG_DL_AUTOQUEUE(21, "IPCR", 8, 0),
> MHI_CHANNEL_CONFIG_UL_FP(34, "FIREHOSE", 32, 0),
> MHI_CHANNEL_CONFIG_DL_FP(35, "FIREHOSE", 32, 0),
> MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0", 128, 2),
> --
> 2.7.4
>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-07-16 7:21 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-07-08 9:32 [PATCH] mhi: pci_generic: Fix inbound IPCR channel Loic Poulain
2021-07-08 17:37 ` Hemant Kumar
2021-07-08 19:54 ` Bhaumik Bhatt
2021-07-16 7:21 ` Manivannan Sadhasivam
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.