* FAILED: patch "[PATCH] iio: accel: bma180: Fix BMA25x bandwidth register values" failed to apply to 4.9-stable tree
@ 2021-07-11 13:01 gregkh
0 siblings, 0 replies; only message in thread
From: gregkh @ 2021-07-11 13:01 UTC (permalink / raw)
To: stephan, Jonathan.Cameron, Stable, linus.walleij, pmeerw; +Cc: stable
The patch below does not apply to the 4.9-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 8090d67421ddab0ae932abab5a60200598bf0bbb Mon Sep 17 00:00:00 2001
From: Stephan Gerhold <stephan@gerhold.net>
Date: Wed, 26 May 2021 11:44:07 +0200
Subject: [PATCH] iio: accel: bma180: Fix BMA25x bandwidth register values
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
According to the BMA253 datasheet [1] and BMA250 datasheet [2] the
bandwidth value for BMA25x should be set as 01xxx:
"Settings 00xxx result in a bandwidth of 7.81 Hz; [...]
It is recommended [...] to use the range from ´01000b´ to ´01111b´
only in order to be compatible with future products."
However, at the moment the drivers sets bandwidth values from 0 to 6,
which is not recommended and always results into 7.81 Hz bandwidth
according to the datasheet.
Fix this by introducing a bw_offset = 8 = 01000b for BMA25x,
so the additional bit is always set for BMA25x.
[1]: https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bma253-ds000.pdf
[2]: https://datasheet.octopart.com/BMA250-Bosch-datasheet-15540103.pdf
Cc: Peter Meerwald <pmeerw@pmeerw.net>
Fixes: 2017cff24cc0 ("iio:bma180: Add BMA250 chip support")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210526094408.34298-2-stephan@gerhold.net
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
diff --git a/drivers/iio/accel/bma180.c b/drivers/iio/accel/bma180.c
index 4a07e60c0e21..e7c6b3096cb7 100644
--- a/drivers/iio/accel/bma180.c
+++ b/drivers/iio/accel/bma180.c
@@ -55,7 +55,7 @@ struct bma180_part_info {
u8 int_reset_reg, int_reset_mask;
u8 sleep_reg, sleep_mask;
- u8 bw_reg, bw_mask;
+ u8 bw_reg, bw_mask, bw_offset;
u8 scale_reg, scale_mask;
u8 power_reg, power_mask, lowpower_val;
u8 int_enable_reg, int_enable_mask;
@@ -127,6 +127,7 @@ struct bma180_part_info {
#define BMA250_RANGE_MASK GENMASK(3, 0) /* Range of accel values */
#define BMA250_BW_MASK GENMASK(4, 0) /* Accel bandwidth */
+#define BMA250_BW_OFFSET 8
#define BMA250_SUSPEND_MASK BIT(7) /* chip will sleep */
#define BMA250_LOWPOWER_MASK BIT(6)
#define BMA250_DATA_INTEN_MASK BIT(4)
@@ -143,6 +144,7 @@ struct bma180_part_info {
#define BMA254_RANGE_MASK GENMASK(3, 0) /* Range of accel values */
#define BMA254_BW_MASK GENMASK(4, 0) /* Accel bandwidth */
+#define BMA254_BW_OFFSET 8
#define BMA254_SUSPEND_MASK BIT(7) /* chip will sleep */
#define BMA254_LOWPOWER_MASK BIT(6)
#define BMA254_DATA_INTEN_MASK BIT(4)
@@ -287,7 +289,8 @@ static int bma180_set_bw(struct bma180_data *data, int val)
for (i = 0; i < data->part_info->num_bw; ++i) {
if (data->part_info->bw_table[i] == val) {
ret = bma180_set_bits(data, data->part_info->bw_reg,
- data->part_info->bw_mask, i);
+ data->part_info->bw_mask,
+ i + data->part_info->bw_offset);
if (ret) {
dev_err(&data->client->dev,
"failed to set bandwidth\n");
@@ -880,6 +883,7 @@ static const struct bma180_part_info bma180_part_info[] = {
.sleep_mask = BMA250_SUSPEND_MASK,
.bw_reg = BMA250_BW_REG,
.bw_mask = BMA250_BW_MASK,
+ .bw_offset = BMA250_BW_OFFSET,
.scale_reg = BMA250_RANGE_REG,
.scale_mask = BMA250_RANGE_MASK,
.power_reg = BMA250_POWER_REG,
@@ -909,6 +913,7 @@ static const struct bma180_part_info bma180_part_info[] = {
.sleep_mask = BMA254_SUSPEND_MASK,
.bw_reg = BMA254_BW_REG,
.bw_mask = BMA254_BW_MASK,
+ .bw_offset = BMA254_BW_OFFSET,
.scale_reg = BMA254_RANGE_REG,
.scale_mask = BMA254_RANGE_MASK,
.power_reg = BMA254_POWER_REG,
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2021-07-11 13:01 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-07-11 13:01 FAILED: patch "[PATCH] iio: accel: bma180: Fix BMA25x bandwidth register values" failed to apply to 4.9-stable tree gregkh
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.